Sit La Precisa S p A 0582040 Remote Control Transmitter User Manual
Sit La Precisa S.p.A. Remote Control Transmitter
User Manual
DATE: May ,02, 2012 9.957.109 01 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS Read the instructions before using the device. This control must be installed in compliance with current legislation SIT La Precisa S.p.A. Viale dell’Industria 31-33 35129 PADOVA - ITALY Introduction to the manual The purpose of this manual is to provide the information you need to install and use this product properly and safely. This information is the outcome of ongoing, systematic data processing and technical tests recorded and validated by the Manufacturer, in compliance with its in-house information quality and safety procedures. The contents of this manual are intended exclusively for skilled, informed and trained users, capable of operating in conditions that are safe for people, the system and the environment, and fully compliant with the requirements discussed in the following pages and in current occupational health and safety legislation. The information concerning assembly/installation, servicing, replacement and repair is intended for authorized and skilled technicians, who are always the only people allowed to carry out said activities. For the proper handling of the system, it is essential to ensure the readability and proper preservation of this manual, also for future reference. Contact the Manufacturer directly in the event of its deterioration, or to ask for any further technical and operational information you may need. The text, descriptions, images, examples and all other details contained in this document are the exclusive property of the Manufacturer. All rights reserved. Product description PR Tra OFL ns AM mi tte E RF RECEIVER Co 829 mb N ina OVA tio m n G illi as volt Co nt ro 0582012, RF receiver: PR Re FLA ce M ive E SYSTEM IDENTIFICATION OF FM LAM C E The RF handset is a remote control based on RF transmission, specifically designed to operate in combination with a specific RF receiver module. PR 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS FOREWORD 82 Co NO mb VA ina mi tio lliv n G olt as HICo LO nt W ro 0582040, RF transmitter: NOTE: when placing the RF receiver module, it is recommended to straighten the antenna as much as possible by keeping it as far as possible from metallic surfaces. RF REMOTE CONTROL CAUTION! It is strictly forbidden to remove or damage the labels. Where necessary, have them replaced urgently and exclusively by the Manufacturer. For any information and/or technical needs relating to the use and servicing of the device, always provide the following preliminary details: Product code Product revision Date of manufacture Example: 0584040 Revision: 00; Date of manufacture: : 12 - 06; Date of issue of the manual (as shown on the cover). The devices in the "582” Series are manufactured by SIT La Precisa. Any, even partial reproduction of the product, auxiliary assemblies and accompanying documentation is strictly forbidden. See Fig. 1 and the table 1: Position of room temperature sensor LCD display ON-OFF/PILOT Key MANUAL-AUTOMATIC Key UP-DOWN arrow Key FUNCTION (SLEEP-PROGRAM)(*) Key or keyboard lock-release(**) Base and battery compartment Note: when RF remote is associated to BIC 05844XX, where Direct Burner Ignition is present, PILOT position of the remote is equivalent to OFF position for the application. 5' MAX MAX SLEEP SLEEP PROGRAM PROGRAM MAX SLEEP PROGRAM SLEEP PROGRAM SLEEP PROGRAM 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS RF Remote Control CLOCK CLOCK MAX CLOCK MAN AUTO MAN PILOT AUTO CLOCK PILOT MAN AUTO PILOT MAN AUTO PILOT CLOCK MAX Ref. Fig. 1: RF Remote Control Icon Description ON-OFF/PILOT MANUAL-AUTOMATIC mode Increase Decrease 5' SLEEP-PROGRAM mode (*) Keyboard lock-release (**) Table. 1: RF Control panel keyboard (*)The button (6) moves between SLEEPand PROGRAM and with a thirth pressure ot the button return into previous status ( MANUAL o AUTO). (*)See Initial start-up. Keyboard lock-unlock at page 9. 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS LCD Display 13 15 14 12 SLEEP MAX PROGRAM 17 11 10 18 CLOCK 19 16 MAN AUTO PILOT 19 20 23 22 21 8 Functioning mode symbols (MANUAL - THERMOSTATIC - PILOT). 9 Digits identifying the weekly TIMER program currently selected. 10 Clock setting symbol. When this symbol appears, you can adjust the clock setting displayed by the digits. 11 Flame power bars: 1 bar = level 1, 2 bar = level 2, 3 bar = level 3, 4 bar = level 4, 5 bar = level maximum. These bars appear only in manual mode. 12 Flame symbol, indicating the current flame power. If flame power is at level 5, the MAX message appears. 13 Symbol for data transmission to receiver 14 SLEEP function symbol. If this symbol does not appear, the SLEEP function is not active. If only the outline of the symbol appears, the SLEEP function is active, meaning that the appliance will switch off at the end of the countdown period set by the user and shown by symbol 17. A solid black symbol indicates that you are in the SLEEP setting menu . 15 TIMER symbol. If this symbol does not appear, the TIMER is not active. If only the outline of the symbol appears, the TIMER is active. A solid black symbol indicates that you are in the TIMER setting menu. 16 Symbols indicating the current day. 17 Internal clock. The clock functions as a countdown when the SLEEP function is selected . 19 Selectable unit of temperature measurement (Celsius – Fahrenheit). 20 Symbol identifying room temperature measured by the built-in sensor. 21 The temperature currently measured by the remote control’s built-in sensor from the room around the remote control. 22 Low battery symbol. When this symbol disappears completely without flashing, the batteries must be replaced. 23 Keypad lock symbol (lock function prevents accidental operation of buttons) Proceed with the programming according to the sequences indicated in Section "RF trasmitter configuration" (Initial Start-Up, Operating Modes) ONLY after reading the information in the following sections. Definitions Automatic mode Thermostatic: the flame level is automatically set by the remote depending on the SET room temperature and the actual room temperature Manual mode The flame level is set manually by the user STANDBY Only the pilot icon is ON, but application corresponding status is OFF. CRONO Time program mode: the remote switches ON-OFF the burner depending on the set time Program Tcheck_standby Temperature check time in AUTO mode, STANDBY position Tcheck_min Temperature check time in AUTO mode, MIN position (level 1) Tcheck_level Temperature check time in AUTO mode, burner positions (level 2 up to level 5) Tset_min Minimum SET temperature in AUTO mode Tset_max Maximum SET temperature in AUTO mode 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS 18 The temperature set by the user, that the appliance must achieve in AUTOMATIC mode. This symbol does not appear in MANUAL mode. RF transmitter. Electrical features Supply voltage: Ambient temperature range: Storage temperature range: Humidity Radio frequency: Maximum range: 4.5 V (three 1.5 V AAA batteries) 0 to 50 °C (32 to 122 °F) 0 to 50 °C (32 to 122 °F) ≤ 85% 433 MHz 65,535 codes options 10 meters RF transmitter. Functional parameters tset_min : tset_max :: tcheck_standby : tcheck_min : tcheck_level : 5°C (41 °F) 35°C (95 °F) 1 min 1 min 1 min 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS Initial start-up. Preliminary operations MAX SLEEP PROGRAM Insert the 3 AAA batteries in the back battery seat (Fig. 2 and Fig. 3). CLOCK MAN AUTO PILOT MAX SLEEP SLEEP PROGRAMPROGRAM MAX CLOCK CLOCK MAN AUTO PILOT MAX SLEEP MAN AUTO PILOT PROGRAM CLOCK MAX SLEEP Fig. 3 PROGRAM Fig. 2 MAN AUTO PILOT CLOCK MAN AUTO PILOT Fig. 4 MAX SLEEP CLOCK Fig. 5 PROGRAM MAN AUTO PILOT MAX Clock regulation MAX SLEEP SLEEP PROGRAM CLOCK PROGRAM CLOCK Quick description: clock regulation is done by mean of keys MAN AUTO PILOT and (Fig. 4) MAN AUTO PILOT MAX SLEEP After first power on (batteries insertion) As soon as the batteries are newly inserted the time’s digits blink. The keys - Fig. 4 - increments (“UP” side) and decrements (“DOWN” side) the hour, - Fig. 4 - set the on going modification’s minute and week’s day value, the keys value among hour, minutes, and week’s day. After week’s day regulation, pushing - Fig. 4 - key sets automatically the operational mode “OFF”. CLOCK MAN AUTO PILOT During operation and During operation, press contemporarily for 3 seconds the pushbuttons - Fig. 4 - , the written “CLOCK” will appear. To change the clock settings, repeat the above described operations. MAX SLEEP PROGRAM CLOCK MAX SLEEP PROGRAM MAN AUTO PILOT CLOCK Switching ON-OFF MAN AUTO PILOT - Fig. 4 - pressed at least 2 seconds. Quick description: keep key MAX SLEEP PROGRAM By pressing the pushbutton - Fig. 4 - for at least 2 seconds, the fireplace and the handset are switched ON-OFF. When the remote is switched OFF, the display shows the time, day, room temperature and if enabled, “CRONO” symbol Fig. 5 - . MAX SLEEP PROGRAM CLOCK CLOCK MAN AUTO PILOT MAN AUTO PILOT Automatic-Manual mode selection MAX SLEEP PROGRAM CLOCK - Fig. 4 MAN AUTO With fireplace lit, by pressing key - Fig. 4 - the operational mode is switched from Quick description: press key PILOT manual to automatic (see page Definitions) and vice versa. When switched from MAN to AUTO, the flame level is set on level 1. When automatic mode is active, the display shows the SET temperature value and the “AUTO” icon. When manual mode is active, the display - Fig. 5 - shows the “MAN” icon, the flame’s icon and the actually set flame level. If level 5 is currently active, the icon “MAX” below the flame’s icon appears. MAX CLOCK MAN AUTO SLEEP PROGRAM PROGRAM MAN AUTO PILOT CLOCK MAN AUTO PILOT MAN AUTO PILOT Initial start-up. Manual mode burner level selection Press and hold the "ON" button ( - Fig. 4 - ) for at least 2 seconds to enable the ignition sequence (see Section 11.5). Use the "UP" ( - Fig. 4 - ) and "DOWN" ( - Fig. 4 - ) buttons to increase or decrease the gas flow to the burner. The operation is not cyclic. In manual mode it's not possible to have a level lower than level 1. Initial start-up. AUTO mode operation When AUTO mode is selected, the automatic modulation is enabled the system setting its operation depending on the values of Tset and Troom. Initial start-up. Modulation Troom is checked and compared with Tset at fixed time intervals and depending on these values, the burner level is updated by one level step at each temperature check: Troom < Tset → burner level INCREASE Troom ≥ Tset → burner level DECREASE As long as Troom < Tset, the burner level is increased up to MAX (level 5), remaining in this state until Troom ≥ Tset. On the other hand, as long as Troom ≥ Tset, the burner level is decreased down to STANDBY position; when in this position, icon “PILOT” appears. The motor remains in the updated burner level until the next temperature check occurs, that is until the temperature check waiting time is expired. When in MIN position (level 1), if temperature check results Troom ≥ Tset, the system remains in this position for a time tcheck_min, after that, if Troom ≥ Tset condition is still valid, it proceeds to STANDBY. In the following table are listed the different waiting times for each burner level: Burner Level STANDBY level (PILOT) LEVEL 1 (MIN) to STANDBY 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS CLOCK Temperature check waiting time tcheck_standby(1)(2) tcheck_min (2) LEVEL 1 (MIN) LEVEL 2 tcheck_level (2) LEVEL 3 LEVEL 4 LEVEL 5 (MAX) Table 2 (1) This waiting timer is reset in case of manual update of Tset above Troom (2) See "Functional parameters" table Initial start-up. STANDBY level exit conditions The system moves out from STANDBY level if: 1) Temperature check waiting timer has expired and Troom < Tset. 2) While in STANDBY position, in case of manual update of Tset > Troom, regardless temperature check waiting timer value. 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS MAX SLEEP PROGRAM Initial start-up. STANDBY level exit behaviour CLOCK MAX SLEEP PROGRAM When the system goes back to modulation, it proceeds as follows: The system moves to level 1 and here remains for a time tcheck_level (see "Functional parameters" table), and from this point operates according modulation algorithm, as explained at par. "Modulation". MAX MAN AUTO PILOT CLOCK SLEEP CLOCK MAN AUTO PILOT MAN AUTO PILOT Initial start-up. Sleep mode Menu navigation - Fig. 4 - pressure Quick description: by key By pressing key - Fig. 4 - , it’s possible to move sequentially to the accessory functions “sleep” and “program”, in this order; with a further pressure of key - Fig. 4 - the display operation comes back to the active operational mode. MAX SLEEP CLOCK MAN AUTO PILOT If no key is pressed within 7 seconds from the menu navigation’s activation, the display comes back to the active operational mode. Sleep function MAX SLEEP - Fig. 5 PROGRAM “Sleep function” can be set by accessing the related menu (see par. Menu navigation). The activation of sleep function is postponed from the activation of a fixed time, settable (increase/decrease) at 15 minutes interval. The remaining time to sleep activation substitutes the current time indication on the display. After the MAN deactivation of sleep menu (7 seconds without any key pressure or further key AUTO - Fig. 4 - PILOT pressure), the countdown to sleep activation appears on the display. As soon as sleep mode activation’s occurs, the current time is again shown. CLOCK If, during the sleep activation waiting interval a STANDBY activation is scheduled by CRONO program, it is ignored and the operation proceeds until SLEEP intervention, while a manual STANDBY or shut OFF disables the previous SLEEP command. MAX SLEEP PROGRAM CLOCK MAN AUTO PILOT - Fig. 5 - is shown. When SLEEP mode is active, the outline of SLEEP icon MAX SLEEP PROGRAM CLOCK Initial start-up. Crono and programming mode Crono program function MAX SLEEP MAN AUTO PILOT PROGRAM “CRONO” mode program can be set directly by key - Fig. 4 - pressure if the burner is OFF, otherwise accessing to MENU navigation (see Par. MENU navigation). CLOCK Once entered in program MENU navigation, the last set program is loaded, also OFF if the CRONO MANwas previously disabled. AUTO When CRONO PILOTis on, the outline of CRONO icon is shown solid icon appears only during setting. MAX Crono programs SLEEP - Fig. 5 - whilst the PROGRAM CLOCK There are 10 weekly programs, to disable CRONO operation select the “OFF” program. PROGRAM MAN AUTO PILOT PROGRAM 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS Weekly Programs 11.00 PM 12.00 AM 9.00 PM Week-End 10.00 PM P10 8.00 PM Workman / Clerk 7.00 PM P09 6.00 PM Workman / Clerk 5.00 PM P08 4.00 PM Workman / Clerk 3.00 PM P07 2.00 PM Workman / Clerk 1.00 PM P06 12.00 PM Shopkeeper 11.00 AM P05 9.00 AM Shopkeeper 10.00 AM P04 8.00 AM Shop 7.00 AM P03 6.00 AM Shift worker 5.00 AM P02 4.00 AM Householder 3.00 AM P01 Days 2.00 AM Program Type 1.00 AM N° Timetable 12.00 AM Weekly program Mon - Fri Sat - Sun Mon - Fri Sat - Sun Mon - Fri Sat - Sun Mon - Sat Sun Mon - Sat Sun Mon - Fri Sat - Sun Mon - Fri Sat - Sun Mon - Fri Sat - Sun Mon - Fri Sat - Sun Fri Sat - Sun SLEEP MAX ON OFF MAX SLEEP PROGRAM PROGRAM CLOCK CLOCK Initial start-up. Keyboard lock-unlock MAN AUTO PILOT By keeping pressed “O” key alMAN least for 5 seconds, the keyboard is lockedAUTO unlocked. The locking icon appears: PILOT Initial start-up. °C-°F With remote OFF, keeping pressed “ ” key at least for 5 seconds, the temperature unit changes from Celsius to Fahrenheit degrees and vice versa. MAX MAX SLEEP PROGRAM SLEEP PROGRAM CLOCK Initial start-up. Battery level indication CLOCK MAN When the batteries have to be changed, the related icon appears: MAN AUTO PILOT AUTO PILOT Shutdown procedure In RUN mode, when the remote system goes to "PILOT" status. button is pressed for a time < 1 second, the 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS 10 Regulatory Compliance (FCC) This equipment has been tested and found to comply with Part 15 of the FCC Rules. NOTE: Any changes or modification not approved by SIT LA PRECISA S.p.A. could void the user’s authority to operate the equipment. 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS THIS PAGE IS INTENTIONALLY LEFT BLANK 11 0582040 RF TRANSMITTER USE AND INSTALLATION INSTRUCTIONS
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Print high-res XMP Toolkit : 3.1-702 Instance ID : uuid:ca463343-4702-40dd-88bd-deca3e522a60 Document ID : adobe:docid:indd:b20c5d0d-9455-11e1-92bd-a405d79d951d Rendition Class : proof:pdf Derived From Instance ID : 161b6563-482d-11e1-9cfb-cee20d8297dd Derived From Document ID : adobe:docid:indd:67b8ccfc-4693-11e1-975c-edeed870990d Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 230.00, 314.00, 72.00, 72.00, 314.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 230.00, 314.00, 72.00, 72.00, 314.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:3240b795-31aa-4e15-a008-ae6966a83d2a, uuid:5E1AC40E9E39E011B571B14A5C0ACFE4, uuid:311228A65F46E111874BAEC8268485D1, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:e08caebb-bc51-4f0c-9634-8daeb301db7d, uuid:311228A65F46E111874BAEC8268485D1, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:EA10D2978198DE11A3C8C35E19E82934, uuid:68eb267a-e433-4ecc-a469-8dc651efc536, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:c363d1b9-6f7a-4e24-a021-7dbcea279128, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:c363d1b9-6f7a-4e24-a021-7dbcea279128, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:3308cabf-df8c-4435-83ec-30e204ff855a, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:5282ffe8-4695-4cb4-be4d-11bc38aa6bf8, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:5282ffe8-4695-4cb4-be4d-11bc38aa6bf8, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:3308cabf-df8c-4435-83ec-30e204ff855a, uuid:5282ffe8-4695-4cb4-be4d-11bc38aa6bf8, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:3308cabf-df8c-4435-83ec-30e204ff855a, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:fb1ccb92-1cd3-4041-8cb8-84a7122f125b, uuid:5282ffe8-4695-4cb4-be4d-11bc38aa6bf8, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:5282ffe8-4695-4cb4-be4d-11bc38aa6bf8, uuid:9718e22f-4772-4734-a7f5-24796c4abb95, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee, uuid:0249b0f9-ae8b-431c-bccf-9ae2c8da28ee Manifest Reference Document ID : uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:9E1E8724FE47E111937CAEA17941F36A, uuid:5D1AC40E9E39E011B571B14A5C0ACFE4, uuid:BAE1D1E05E46E111874BAEC8268485D1, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:248844F0C376DE119B5FDA994B99FBCD, uuid:BAE1D1E05E46E111874BAEC8268485D1, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:E910D2978198DE11A3C8C35E19E82934, uuid:0A2F542F8098DE11BD13AA6C531FE42E, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:7F2E751B6756DE11AA7BB3F537D92092, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:7F2E751B6756DE11AA7BB3F537D92092, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:D71D598FA760DE11BEF8B7A1D13B75C7, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:AC4DBA7D395BDE11A6EEBE03EFD201B0, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:AC4DBA7D395BDE11A6EEBE03EFD201B0, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:D71D598FA760DE11BEF8B7A1D13B75C7, uuid:AC4DBA7D395BDE11A6EEBE03EFD201B0, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:D71D598FA760DE11BEF8B7A1D13B75C7, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:87a8785c-a702-422f-8c9c-dd0f1c38f3c4, uuid:AC4DBA7D395BDE11A6EEBE03EFD201B0, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:AC4DBA7D395BDE11A6EEBE03EFD201B0, uuid:FA28B2858298DE11B286EE66F6ADA761, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499, uuid:4A8C65FB1EDCDF11A2F19BB6075AA499 Create Date : 2012:05:02 15:15:58+02:00 Modify Date : 2012:05:02 15:18:41+02:00 Metadata Date : 2012:05:02 15:18:41+02:00 Creator Tool : Adobe InDesign CS2 (4.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 6496 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Has XFA : No Page Count : 12 Creator : Adobe InDesign CS2 (4.0.5)EXIF Metadata provided by EXIF.tools