Skytech II TS-R-1 Digital Thermostat Transmitter User Manual SS
Skytech II, Inc. Digital Thermostat Transmitter SS
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 295565 |
| Application ID | 0Q9PrtqqzYARJYqW3WGEpg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 0.7kB (8729 bits) |
| Date Submitted | 2003-01-13 00:00:00 |
| Date Available | 2003-01-13 00:00:00 |
| Creation Date | 2003-01-08 20:00:52 |
| Producing Software | Acrobat PDFWriter 5.0Windows NT ª© |
| Document Lastmod | 2003-01-08 20:02:03 |
| Document Title | SS user manual.doc |
| Document Creator | Microsoft Word - SS user manual.doc |
| Document Author: | Administrator |
SKYTECH II, INC 9230 Conservation Way, Fort Wayne, In 46809, USA Tel: 260-459-1703 Fax: 260-459-1592 FCC ID: K9LTS-R-1 SKY TS/R-1 Digital Thermostat USER MANUAL 1) Rear Case- press ON/OFF(ON-the back left button, OFF- the back right button) at the same time to change C or F 2) Front Case- move rod to OFF then send 3 times OFF signal to receiver 3) Front Case- move rod to ON then send 3 times ON signal to receiver 4) Front Case- move rod between OFF & ON for adjusting desire temperature. When temperature below adjusted temperature then it will turn on receiver with flame icon after 2 minutes. When temperature higher than adjusted temperature then it will disable the flame icon then turn off the receiver. It will have SET icon when rod was moved between ON & OFF scale. The action of SKY TS/R-1 Use component RT-103AT to sense the temperature and compare with ROD SETTING temperature which setting by users. When setting temperature below the room temperature then transmitter will send 3 times signals to turn on the receivers. If SETTING temperature is higher than room temperature then transmitter will send 3 times signals to turn off the receiver (fire place). Caution: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. “Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.”
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2003:01:08 20:00:52Z Modify Date : 2003:01:08 20:02:03+08:00 Page Count : 1 Creation Date : 2003:01:08 20:00:52Z Author : Administrator Producer : Acrobat PDFWriter 5.0Windows NT ª© Mod Date : 2003:01:08 20:02:03+08:00 Metadata Date : 2003:01:08 20:02:03+08:00 Title : SS user manual.doc Creator : AdministratorEXIF Metadata provided by EXIF.tools