Smarfid Security Equipment MD3221356M Magic Series Desfire Reader User Manual
Shanghai Smarfid Security Equipment Co, Ltd. Magic Series Desfire Reader
User Manual
Available Later! Number pad Magic Standard Magic Available Later! DesFire EV1 Magic Series Reader Design & Technologies Read full 56 bits UID, Application & Files Tamper protection content of DesFire EV1 card. Support 3DES & AES encrypted Front plate customization and back lit design is communication between the reader and card. available. Support on-site Reader Configuration Card to change certain parameters. Number pad use “touching sensor”, the latest Design with End User logo is possible. Door Bell function for Number pad reader. technology and individual number backlit when touch. Economical Mini Magic can be mullion mount. Display Magic can provide customer a full OLED Display allow user to see the message series of choices clearly under direct sunlight. Display reader can display CSN/UID number or A PIN can be set inside the card to authenticate Programmed Card Number or user Name when with the reader so that “Card + PIN” mode can the user card is present.* (Supported Multiple be implemented without relying on the Languages) controller.* Friendly Installation “Touch” number pad does not Universal back plate allows carry any moving parts, which the reader be installed on implies more durable. different size of gang box. All weather proof design with Non-drop bottom screw made Stainless steel Security IP65 certificate. servicing handier. screw is an option Metal back plate allows the All input and output signals are reader install on metal surface protected against static and back-to back without charges. affecting the read range. Reverse power protection. All inputs are 12Vdc protected. Model Number: X1 X2 N1 N2 N3 – N4 X3 RF Technologies Reader Appearance and Function N1 N2 X1X2 MD = DesFire Technology N3 N4 X3 Model Functions Standard & Mini Reader 3 = Normal Reader ; 5 = Display Reader 2 = Normal Size 8 = Mini Size 2 = Read UID / Card Number 3 = Sector reading (Only Mifare) 3 = Terminal (for Display Reader) 8 = Pigtail N = No Number pad; K = Number pad Keypad Reader Display Reader Configurable Functions Re-configure Window 5 seconds (Default) or Half an hour after Power up Reader Output Format CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed ID Wiegand Plus Width Keypad Output Different choices to fit with different Controller’s requirements N/A Buzzer Control LED/Back lit Control Display Clock Synchronization. Definable Definable Reader & Controller control (Default) or Controller control only Define different LED color response base on Green LED N/A N/A N/A H/W reset Via RS485 TimeSyn S/W Technical Specifications Typical Read range 2 – 3 cm Reader Standard Output Wiegand (RS232 & RS485 optional) Standard Keypad output N/A Wiegand with 4 bits burst Wiegand with 4 bits burst Display N/A N/A OLED Display Display Message Wiring Distance N/A N/A 150m (22 AWG with shielded cable) Access Granted, Access Denied, Enter PIN; Time; Card Number 120m (22 AWG with shielded cable) Operating Specification: Operating Voltage 10 - 15VDC Operating Current 150mA (max) Operating Temperature -30℃-70℃ Exterior dimension (Mini) 115.5*84.5*20.5mm (84.05*54.05*16.5mm) Case material Standard Color PC+ABS Black Operating Humidity 10% - 90% Weight (Mini) 210g (160g) FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Anna Create Date : 2016:10:20 10:03:18+08:00 Modify Date : 2016:10:20 10:03:18+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 9.0.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : E:\Anna\跟进项目\南京\周晨\上海思惠德\16020758\Tech files\审核资料\TCF\DesFire Magic Series 20130625 En.doc Creator : Anna Document ID : uuid:ca3577bb-b288-4600-bc22-cbd8d4832379 Instance ID : uuid:a667a683-4fa8-44cf-b304-daf303cc700d Page Count : 3EXIF Metadata provided by EXIF.tools