Smarfid Security Equipment MGLH32 Magic Series Legic & 125KHz Reader User Manual

Shanghai Smarfid Security Equipment Co, Ltd. Magic Series Legic & 125KHz Reader

User manual

125KHz & 13.56HMz Dual Frequencies Magic Series ReaderDesign & TechnologiesNumber pad use “touching sensor”, the latesttechnology and individual number backlit whentouch. Economical Mini Magic can be mullion mount.Display Magic can provide customer a fullseries of choicesFront plate customization and back lit design isavailable.Design with End User logo is possible.Support on-site Reader Configuration Card tochange certain parameters.OLED Display allow user to see the messageclearly under direct sunlight.Door Bell function for Number pad reader.Tamper protectionFriendly Installation“Touch” number pad does notcarry any moving parts, whichimplies more durable.All weather proof design withIP65 certificate.Universal back plate allowsthereaderbeinstalledondifferent size of gang box.Non-drop bottom screw madeservicing handier.Metal back plate allows thereader install on metal surfaceand back-to back withoutaffecting the read range.All input and output signals areprotected against staticcharges.Reverse power protection.Stainless steel Securityscrew is an optionAll inputs are 12Vdcprotected.Display reader can display CSN/UID number orProgrammed Card Number or user Name whenthe user card is present.* (Supported MultipleLanguages)Available Later! Standard Magic Available Later!Number pad MagicRead both low frequencies (125KHz) and highfrequencies card; supported high frequencytechnologies are Legic, Mifare, Mifare Plus,DesFire or FuDan CPU).A PIN can be set inside the card to authenticatewith the reader so that “Card + PIN” mode canbe implemented without relying on thecontroller.*
FCC Caution.§ 15.19 Labelling requirements.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device maynot cause harmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation.§ 15.21 Information to user.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authorityto operate the equipment.§ 15.105 Information to the user.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.Model Number: X1X2N1N2N3–N4X3RF Technologies Reader Appearance and FunctionX1X2HM = Mifare & 125KHz TechnologiesHL = Legic & 125KHz TechnologiesN13 = Normal Reader ; 5 = Display ReaderN22 = Normal Size8=MiniSizeN32 = Read UID / Card Number3 = Read Sector (Mifare) / Segment (Legic)N43 = Terminal (for Display Reader)8=PigtailX3N = No Number pad; K = Number pad
ModelFunctions Standard & Mini Reader Keypad Reader Display ReaderConfigurable FunctionsRe-configure Window 5 seconds (Default) or Half an hour after Power upReader Output Format CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed IDWiegand Plus Width Different choices to fit with different Controller’s requirementsKeypad Output N/A Definable DefinableBuzzer Control Reader & Controller control (Default) or Controller control onlyLED/Back lit Control Define different LED color response base on Green LED N/ADisplay ClockSynchronization. N/A N/A H/W resetVia RS485 TimeSyn S/WTechnical SpecificationsTypical Read range 3–5cmReader Standard Output Wiegand (RS232 & RS485 optional)Standard Keypad output N/A Wiegand with 4 bits burst Wiegand with 4 bits burstDisplay N/A N/A OLED DisplayDisplay Message N/A N/AAccess Granted, AccessDenied, Enter PIN;Time;Card NumberWiring Distance 150m (22 AWG with shielded cable) 120m (22 AWG with shielded cable)Operating Specification:Operating Voltage 10 - 15VDCOperating Current 150mA (max)Operating Temperature -30℃-70℃Exterior dimension (Mini) 115.5*84.5*20.5mm (84.05*54.05*16.5mm)Case material PC+ABSStandard Color BlackOperating Humidity 10% - 90%Weight (Mini) 210g (160g)

Navigation menu