Smarfid Security Equipment MGLH32 Magic Series Legic & 125KHz Reader User Manual
Shanghai Smarfid Security Equipment Co, Ltd. Magic Series Legic & 125KHz Reader
User manual
Available Later! 125KHz & 13.56HMz Number pad Magic Standard Magic Available Later! Dual Frequencies Magic Series Reader Design & Technologies Read both low frequencies (125KHz) and high Tamper protection frequencies card; supported high frequency technologies are Legic, Mifare, Mifare Plus, Front plate customization and back lit design is DesFire or FuDan CPU). available. Support on-site Reader Configuration Card to Design with End User logo is possible. change certain parameters. Number pad use “touching sensor”, the latest Door Bell function for Number pad reader. technology and individual number backlit when touch. Economical Mini Magic can be mullion mount. Display Magic can provide customer a full OLED Display allow user to see the message series of choices clearly under direct sunlight. Display reader can display CSN/UID number or A PIN can be set inside the card to authenticate Programmed Card Number or user Name when with the reader so that “Card + PIN” mode can the user card is present.* (Supported Multiple be implemented without relying on the Languages) controller.* Friendly Installation “Touch” number pad does not Universal back plate allows carry any moving parts, which the reader be installed on implies more durable. different size of gang box. All weather proof design with Non-drop bottom screw made Stainless steel Security IP65 certificate. servicing handier. screw is an option Metal back plate allows the All input and output signals are reader install on metal surface protected against static and back-to back without charges. affecting the read range. Reverse power protection. All inputs are 12Vdc protected. FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Model Number: X1 X2 N1 N2 N3 – N4 X3 RF Technologies Reader Appearance and Function N1 N2 HM = Mifare & 125KHz Technologies X1X2 N3 HL = Legic & 125KHz Technologies N4 X3 3 = Normal Reader ; 5 = Display Reader 2 = Normal Size 8 = Mini Size 2 = Read UID / Card Number 3 = Read Sector (Mifare) / Segment (Legic) 3 = Terminal (for Display Reader) 8 = Pigtail N = No Number pad; K = Number pad Model Functions Standard & Mini Reader Keypad Reader Display Reader Configurable Functions Re-configure Window 5 seconds (Default) or Half an hour after Power up Reader Output Format CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed ID Wiegand Plus Width Keypad Output Different choices to fit with different Controller’s requirements N/A Buzzer Control LED/Back lit Control Display Clock Synchronization. Definable Definable Reader & Controller control (Default) or Controller control only Define different LED color response base on Green LED N/A N/A N/A H/W reset Via RS485 TimeSyn S/W Technical Specifications Typical Read range 3 – 5 cm Reader Standard Output Wiegand (RS232 & RS485 optional) Standard Keypad output N/A Wiegand with 4 bits burst Wiegand with 4 bits burst Display N/A N/A OLED Display Display Message Wiring Distance N/A N/A 150m (22 AWG with shielded cable) Access Granted, Access Denied, Enter PIN; Time; Card Number 120m (22 AWG with shielded cable) Operating Specification: Operating Voltage 10 - 15VDC Operating Current 150mA (max) Operating Temperature -30℃-70℃ Exterior dimension (Mini) 115.5*84.5*20.5mm (84.05*54.05*16.5mm) Case material Standard Color PC+ABS Black Operating Humidity 10% - 90% Weight (Mini) 210g (160g)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Administrator Create Date : 2015:01:16 17:04:37+08:00 Modify Date : 2015:01:16 17:04:37+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : Administrator Title : C:\Documents and Settings\Administrator\Application Data\Foxmail7\Temp-3832-20150116082324\Dual Frequencies Magic Series 201306 Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.2.0 (Windows) Document ID : uuid:7948ca64-f959-4f06-9e41-b42e7db59e0f Instance ID : uuid:02fab948-3a71-4dca-a3bc-2a8c894eca42 Page Count : 3EXIF Metadata provided by EXIF.tools