SmartLabs 2443A Access Point User Manual 2443 qs 20090108 qxp

SmartLabs, Inc. Access Point 2443 qs 20090108 qxp

Users Manual

Quick-Start GuideACCESS POINTTMSet ButtonStatus LEDINSTEON-Compatible Access Point (#2443 & 2443P)NNeeeedd HHeellpp?? FFoorr aassssiissttaannccee ccaallll yyoouurr ssuuppppoorrtt ppeerrssoonn @@ 880000--776622--77884466Access Points bridge RF-only INSTEON devices with power line-only INSTEON devices and couple the phases of your home.Installing Two Access PointsSStteepp 11..Plug the ffiirrssttAccess Point into a convenient wall outlet.For best performance when using a remote control place an Access Point in the same room.SStteepp 22..On the ffiirrsstt Access Point tap the SET button four times rapidly.The Access Point’s LED will turn bright and remain steadily on.SStteepp 33..Plug the sseeccoonnddAccess Point into another outlet.SStteepp 44..Look at the sseeccoonnddAccess Point’s Status LED:• If it is bbrriigghhtt aanndd sstteeaaddiillyy oonn, go to step 5.• If it is bblliinnkkiinngg oorr ddiimm, repeat step 3, trying another outlet.NNoottee:: YYoouu mmaayy nneeeedd ttoo ttrryy sseevveerraall oouuttlleettss..If you are unable to locate an outlet please call 866-243-8018 for assistance. If you have tried 5 outlets, go back and move the first Access Point to another outlet.SStteepp 55..Tap and release the SET button on the ffiirrssttAccess Point. The Status LED on both Access Points will go dim and remain steadily on.Congratulations! You have made your home INSTEON ready. HINTS• Do not use an outlet controlled bya switch.• Do not place near large metalobjects.Troubleshooting Tips•The Status LED on the Access Point is not turning on at all.Make sure you are not on a switched outlet.•Do not plug into a power strip or UPS (uninterruptible power supply).•Add additional Access Points around the home to eliminate RF dead spots.The advanced User's Guide can be found at hhttttpp::////wwwwww..ssmmaarrtthhoommee..ccoomm//22444433..hhttmmll.SSmmaarrttLLaabbss LLiimmiitteedd WWaarrrraannttyySmartLabs warrants to the original consumer of this product that, for a period of two years from the date of purchase, this product will be free from defects in material and workmanship and will performin substantial conformity to the description of the product in the owner's manual. This warranty shall not apply to defects or errors caused by misuse or neglect.IINNSSTTEEOONN aanndd TThhee IINNSSTTEEOONNCCOOMMPPAATTIIBBLLEEllooggoo aarree ttrraaddeemmaarrkkss ooff SSmmaarrttLLaabbss,, IInncc.. UU.. SS.. PPaattnntt NNoo.. 77,,334455,,999988 ©© CCooppyyrriigghhtt 22000099 SSmmaarrttLLaabbss,, 1166554422 MMiilllliikkaann AAvvee..,, IIrrvviinnee,, CCAA 9922660066--55002277 880000--776622--77884466 wwwwww..ssmmaarrttllaabbssiinncc..ccoommrev. 090108.FCC Compliance StatementThis device complies with FCC Rules Part 15. Operation is subject to two conditions: ((11))This device may not cause harmful interference, and((22))this device must accept any interference that may be received or that may causeundesired operation. The digital circuitry of this device has been tested and found tocomply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interferencein residential installations. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio and television reception. However, there is noguarantee that interference will not occur in a particular installation. If this device doescause such interference, which can be verified by turning the device off and on, the useris encouraged to eliminate the interference by one or more of the following measures:•Re-orient or re-locate the receiving antennaof the device experiencing the interference.•Increase the distance between this deviceand the receiver.•Connect the device to an AC outlet on acircuit different from the one that suppliespower to the receiver.•Consult the dealer or an experiencedradio/TV technician.WWAARRNNIINNGG!! Changes or modifications to thisunit not expressly approved by the partyresponsible for compliance could void theuser's authority to operate the equipment.

Navigation menu