Smartware UN3D Smartcard reader User Manual USN 3D DSHEET
Smartware Smartcard reader USN 3D DSHEET
Contents
- 1. user manual notices
- 2. user manual
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1603409 |
| Application ID | iFAaMC8USD5R5rmdujRurw== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 47.61kB (595140 bits) |
| Date Submitted | 2011-12-15 00:00:00 |
| Date Available | 2011-12-15 00:00:00 |
| Creation Date | 2011-11-14 12:02:52 |
| Producing Software | Acrobat Distiller 10.1.1 (Windows) |
| Document Lastmod | 2011-11-14 12:02:52 |
| Document Title | Microsoft Word - USN-3D_DSHEET |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | FA |
USN-3D - Data Sheet USN-3D Product From 3 to 6 USnano in a rackable format Data Sheet V1R01d Date: 14 November 2011 Versions: © 2011, Smartware CONFIDENTIAL USN3 MX3-3I3P MX6-6I MX6-6I3P USN-3D - Data Sheet DOCUMENT HISTORY Edition V1R01a Date Sep 2011 Author FA Description of changes Original Version V1R01b Nov 2011 FA Remove USN1 from FCC / IC compliance V1R01c Nov 2011 FA Remove all references to USN1 V1R01d Nov 2011 FA Remove FCC / IC to MX6-6I COPYRIGHT All rights of translation adaptation and reproduction by any mean reserved for all the countries. Any reproduction or any complete or partial representation of the pages published in this work, made without the written permission of SMARTWARE is illicit and constitutes an imitation, whatever mean is used. Only reproductions strictly reserved for the private use of the purchaser and not intended to be used collectively are authorized. So are the short quotations justified by the scientific or informative nature of the work which they are extracted from.(art L.122-4 L. 122-5 and L. 335-2 of the French Code ruling on intellectual property). © Smartware, Les ULIS, France, 1999-2011 WARNING Information in this document is subject to change without notice and does not represent a commitment on the part of SMARTWARE. CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet Contents: Description.................................................................................................................. 6 USN-3D - FUNCTIONNALITIES .................................................................................. 7 2.1 Differences between versions ................................................................................... 8 2.1.1 2.1.2 2.1.3 2.1.4 Backplane connector .................................................................................................... 8 Ethernet ........................................................................................................................ 8 Bridge connector (MX6 only) ........................................................................................ 8 Versions in Photos ....................................................................................................... 8 2.2 Connectivity ................................................................................................................ 9 2.3 ESD Protections ......................................................................................................... 9 2.4 Hardware settings ...................................................................................................... 9 2.4.1 Safe Mode .................................................................................................................... 9 2.4.2 Node Definition ............................................................................................................. 9 2.4.3 Default Configuration .................................................................................................. 10 2.4.3.1 2.4.3.2 2.4.3.3 MX6 Version ............................................................................... 10 MX3 Version ............................................................................... 10 USN3 Version .............................................................................. 11 USN-3D – INPUTS/OUTPUTS DESCRIPTION ......................................................... 12 3.1 Notation ..................................................................................................................... 12 3.2 Backplane Connector (J30) ..................................................................................... 12 3.2.1 USN3 Version............................................................................................................. 13 3.2.2 MX3 / MX6 Version .................................................................................................... 15 3.3 Contact Interface Connector ................................................................................... 17 3.4 ContactLess Connector ........................................................................................... 18 3.5 SW1 MicroSwitch ..................................................................................................... 18 3.6 SW70 / SW71 / SW72 MicroSwitches ...................................................................... 18 USN-3D - CABLE RECOMMENDATIONS ................................................................ 19 4.1 Contact Interface Cable ........................................................................................... 19 4.1.1 Cable model ............................................................................................................... 19 4.1.2 Output connector ........................................................................................................ 19 4.2 Contactless Interface Cable .................................................................................... 20 4.3 Contactless Antenna ................................................................................................ 20 USN-3D – CHARACTERISTICS ................................................................................ 21 5.1 Electrical Characteristics ........................................................................................ 21 5.2 Mechanical Characteristics ..................................................................................... 22 5.2.1 MX6 Version ............................................................................................................... 22 5.2.2 MX3 / USN3 Version .................................................................................................. 23 © 2011, Smartware CONFIDENTIAL USN-3D - Data Sheet 5.3 Front Panel................................................................................................................ 24 5.3.1 MX6 Version ............................................................................................................... 24 5.3.2 MX3 Version ............................................................................................................... 24 5.3.3 USN3 Version............................................................................................................. 25 USN-3D – REGULATORY ......................................................................................... 26 USN-3D – ORDERING INFORMATION .................................................................... 27 CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet List of Figures: Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure 1: USN3 / MX3 / MX6............................................................................. 8 2: MX6 Node Identifier Default Configuration ....................................... 10 3: MX3 Node Identifier Default Configuration ....................................... 10 4: USN3 Node Identifier Default Configuration ..................................... 11 5: Cable recommendation .................................................................... 19 6: RJ45 Cable Connector ...................................................................... 19 7: MX6 Mechanical Schematic .............................................................. 22 8: MX3/USN3 Mechanical Schematic .................................................... 23 9: MX6 Front Panel Mechanical Schematic ............................................ 24 10: MX3 Front Panel Mechanical Schematic .......................................... 24 11: USN3 4f Front Panel Mechanical Schematic .................................... 25 List of Tables: Table Table Table Table Table Table Table Table Table Table Table Table Table 1: 2: 3: 4: 5: 6: 7: 8: 9: 10 11 12 13 MX6 Node Identifier Definition ......................................................... MX3 Node Identifier Definition ......................................................... USN3 Node Identifier Definition ....................................................... J30 Reference .................................................................................. USN3 - J30 Connector Pinout ............................................................ MX3/MX6 J30 Connector Pinout ....................................................... Contact Connector Pinout ................................................................. Contactless Connector Pinout ........................................................... SW1 Definition ................................................................................. : SW70/71/72 Definition .................................................................. : Contact Cable Definition ................................................................. : General Characteristics .................................................................. : Ordering Information ..................................................................... 10 10 11 12 14 16 17 18 18 18 20 21 27 References: US-Nano - Datasheet v1r03c T70x45x2 – Datasheet v1r01b Application Note TP_200911_020 © 2011, Smartware CONFIDENTIAL USN-3D - Data Sheet ULTRASMART™ USN-3D 1 DESCRIPTION The USN-3D product is declined in several versions: USN3, MX3-3I3P, MX6-6I and MX6-6I3P. The standard Europe form factor (220 x 100 mm) makes it easy to integrate on standard format racks. Features Fully Integrated Gigabit Switch : o 10 / 100 / 1000 Mbps Ethernet on backplane Configurable Hardware: o Multiple Hardware versions: 3 to 6 USnano up to 6 contact & 3 contactless interfaces o Configurable node (IP address) o Safe mode functionality o Serial port for debug or communication (USN3 only) MX3 MX6 Integrated Protocols: o ISO 7816-3/4 (T=0 / T=1) o ISO 14443 A / B up to 424 Kbps, FeliCaTM 212 / 424, MifareTM, Mifare+, PayPass A / B o USB Host Low / Full / High speed (up to 480 Mbps) o Single Wire Protocol (SWP) up to 1.6 Mbps Applications USN3 ELECTROSTATIC DISCHARGE SENSITIVITY Production environment The USN-3D can be damaged by ESD. SMARTWARE recommends that USN-3D has to be handled with appropriate bracelet linked to earth. Failure to observe proper handling and installation procedures can cause damages. SAFETY RECOMMENDATIONS - Handling and connections should be done without power supply. ABSOLUTE MAXIMUM RATINGS Power Supply……………………………………………+14 Volts - The product includes a hot Surface. - A fire enclosure must be provided in the end product. CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet 2 USN-3D - FUNCTIONNALITIES The USN-3D product is a solution for: USnano Integration in a 220 x 100 format: Contact interface: ISO7816 SWP USB Open Short Test (Clamp Diode functional Test). Continuity Test (Check the entire connection with smartcard: pins, cable, connectors…) Contactless interface: ISO 14443 Type A / B up to 424 Kbps PayPass A / B FeliCaTM 212 / 424 MifareTM Mifare + Please refer to US-NANO Datasheet v1r03c for more detailed information about smartcard contact and contactless interfaces. Some functionalities are under licenses. Please refer to specific documentation for more information. © 2011, Smartware CONFIDENTIAL USN-3D - Data Sheet 2.1 DIFFERENCES BETWEEN VERSIONS The definitions of the versions are USNx & MXx-yIzP: - Where x means the number of USnano board in the assembly. - Where y means the number of contact interfaces (max: 6). - Where z means the number of contactless interfaces (max: 3). Note: The MX versions are dedicated to specific customers. 2.1.1 Backplane connector The main difference between USNx & MXx is the backplane connector pin out. 2.1.2 Ethernet The USN3, MX3 includes a Gbps Ethernet switch. The MX6 includes two Gbps Ethernet switches (1 on master board / 1 on slave board). - The two switches are connected using Ethernet Gbps connection 2.1.3 Bridge connector (MX6 only) The MX6 uses a bridge connector to provide power supply, Ethernet connection, and configuration signals from master board (with backplane connector) to slave board (without backplane connector). 2.1.4 Versions in Photos Below are shown the different versions (represented without shielding for understanding). USN3 MX3 MX6 Figure 1: USN3 / MX3 / MX6 CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet 2.2 CONNECTIVITY The USN-3D product can be managed by: o Ethernet 10 / 100 / 1000 Mbps (UDP / TCP Protocols). o RS232 serial port (only available for USnano A of USN3 version) 2.3 ESD PROTECTIONS The USN-3D provides ESD protections on contacts C1 to C8. A dedicated earth path evacuates the ESD through sidebands & front panel. The sidebands are 2 metal strip lines of 2 mm large on the USN-3D which slide into the guides. The guides might have some earth connection to connect the USN-3D earth to the machine / rack’s earth. Please refer to ESD application note TP_200911_020 for more information about ESD protection on test Head. 2.4 HARDWARE SETTINGS 2.4.1 Safe Mode The safe Mode is common to all USnano using micro switch SW1 (require a restart). In safe Mode, each USnano will also take its hardware specified node. 2.4.2 Node Definition The “Node Base” is the node defined by the DIN connector (bit 0 to 7). The bit 6 and 7 can also be set using SW1 switch. The “SubNode” is defined by SW70 / SW71 / SW72 (bit 0 to 2). => Computed Node = NodeBase + SubNode Important: The assembly’s node base should be set using an 8 bits micro switch present on the backplane. © 2011, Smartware CONFIDENTIAL USN-3D - Data Sheet 2.4.3 Default Configuration 2.4.3.1 Nano MX6 Version Boards Node value Master (with backplane connector) Master Master Slave (without backplane connector) Slave Slave Node Base + 0 Node Base + 2 Node Base + 4 Node Base + 1 Node Base + 3 Node Base + 5 Example with NodeBase = 1 Example with NodeBase = 7 11 10 12 Table 1 : MX6 Node Identifier Definition NodeBase = 1: Figure 2: MX6 Node Identifier Default Configuration 2.4.3.2 MX3 Version USnano # Node value Node Base + 0 Node Base + 2 Node Base + 4 Example with NodeBase = 1 Example with NodeBase = 7 11 Table 2 : MX3 Node Identifier Definition NodeBase = 1: Figure 3: MX3 Node Identifier Default Configuration 10 CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet 2.4.3.3 USN3 Version USnano # Node value Node Base + 0 Node Base + 1 Node Base + 2 Example with NodeBase = 1 Example with NodeBase = 7 Table 3 : USN3 Node Identifier Definition NodeBase = 1: Figure 4: USN3 Node Identifier Default Configuration © 2011, Smartware CONFIDENTIAL 11 USN-3D - Data Sheet 3 USN-3D – INPUTS/OUTPUTS DESCRIPTION 3.1 NOTATION The notation for pin type is as following: Input (default) Output Active low Active high (default) Tri-state Open Collector Ground Power supply Not connected A pull up is connected A pull down is connected Undefined The types can be mixed. Example: IL = Active Low Input 3.2 BACKPLANE CONNECTOR (J30) GigaBit Ethernet using transformer connection will be connected as below. Description This connector is only mounted on master board Number of PINs 3 * 16 (2 mm X 2 mm X 2 mm) Location Top side Reference FCI 86093487313755ELF (DIN41612 C/2 male 48) Table 4 : J30 Reference Note for NodeBase: INi lines give the negation of the Network Node ID of the board during Boot phase. The value 0xFF represents the default node (Node Id = 0x01, or is defined by software). Another value has priority over the software definitions (ex: value 0xFC represents Node 3). When at least one of the micro-switches is ON, the node-ID defined by micro-switch has priority on the software definitions. 12 CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet 3.2.1 USN3 Version PIN Name Type Voltage Domain DESCRIPTION A1 GND 0V Common Ground B1 L1Tx +- 5V Line1 RS232 Transmit (USnano A only) C1 L1Rx +- 5V Line1 RS232 Receive (USnano A only) A2 RFU B2 RFU C2 RFU A3 RFU B3 RFU C3 RFU A4 GND 0V B4 IN0 ILU 0 / 3V3 NodeBase 0 C4 IN1 ILU 0 / 3V3 NodeBase 1 A5 IN2 ILU 0 / 3V3 NodeBase 2 B5 IN3 ILU 0 / 3V3 NodeBase 3 C5 IN4 ILU 0 / 3V3 NodeBase 4 A6 IN5 ILU 0 / 3V3 NodeBase 5 B6 IN6 ILU 0 / 3V3 NodeBase 6 C6 IN7 ILU 0 / 3V3 NodeBase 7 A7 RFU B7 RFU C7 Safe_Mode ILU 0 / 3V3 Safe Mode A8 RFU B8 RFU C8 RFU A9 RFU B9 +3V3 PO +3V3 C9 LILED OL 0 / 3V3 Common Ground Internal Logic Power Supply (since v1r02) Ethernet Led Link (since v1r02) A10 RFU B10 RFU C10 RFU A11 ETH_BP_3P IO Ethernet Pair 3+ B11 ETH_BP_3M IO Ethernet Pair 3- C11 RFU A12 ETH_BP_1P IO Ethernet Pair 1+ (RX+) B12 ETH_BP_2P IO Ethernet Pair 2+ C12 ETH_BP_0P IO Ethernet Pair 0+ (TX+) A13 ETH_BP_1M IO Ethernet Pair 1- (RX-) © 2011, Smartware CONFIDENTIAL 13 USN-3D - Data Sheet B13 ETH_BP_2M IO Ethernet Pair 2- C13 ETH_BP_0M IO Ethernet Pair 0- (TX-) A14 RFU B14 RFU C14 RFU A15 Vaa +12V B15 GND 0V Common Ground C15 GND 0V Common Ground A16 Vaa +12V B16 GND 0V Common Ground C16 GND 0V Common Ground Main power supply Main power supply Table 5 : USN3 - J30 Connector Pinout 14 CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet 3.2.2 MX3 / MX6 Version PIN Name Type Voltage Domain DESCRIPTION A1 GND 0V Common Ground B1 GND 0V Common Ground C1 GND 0V Common Ground A2 RFU B2 RFU C2 RFU A3 Vaa +12V Main power supply B3 Vaa +12V Main power supply C3 Vaa +12V Main power supply A4 IN2 ILU 0 / 3V3 NodeBase 2 B4 IN3 ILU 0 / 3V3 NodeBase 3 C4 RFU A5 IN0 ILU 0 / 3V3 NodeBase 0 B5 IN1 ILU 0 / 3V3 NodeBase 1 C5 RFU A6 ETH_BP_1P IO Ethernet Pair 1+ (RX+) B6 ETH_BP_1M IO Ethernet Pair 1- (RX-) C6 RFU A7 ETH_BP_0P IO Ethernet Pair 0+ (TX+) B7 ETH_BP_0M IO Ethernet Pair 0- (TX-) C7 RFU A8 IN4 ILU 0 / 3V3 NodeBase 4 B8 IN5 ILU 0 / 3V3 NodeBase 5 C8 RFU A9 RFU B9 RFU C9 RFU A10 RFU B10 RFU C10 RFU A11 RFU B11 RFU C11 RFU A12 IN6 ILU 0 / 3V3 NodeBase 6 B12 IN7 ILU 0 / 3V3 NodeBase 7 C12 RFU © 2011, Smartware CONFIDENTIAL 15 USN-3D - Data Sheet A13 RFU B13 ETH_BP_2P C13 RFU A14 RFU B14 ETH_BP_2M C14 RFU A15 RFU B15 ETH_BP_3P C15 RFU A16 RFU B16 ETH_BP_3M C16 RFU IO Ethernet Pair 2+ IO Ethernet Pair 2- IO Ethernet Pair 3+ IO Ethernet Pair 3- Table 6 : MX3/MX6 J30 Connector Pinout 16 CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet 3.3 CONTACT INTERFACE CONNECTOR A standard RJ45 is used for contact interface. The connector is shielded to PCB main Ground. The yellow led indicate the CPU activity. The green led indicate the contact interface power status. PIN Name Type DESCRIPTION CC3 IO Card Contact 3 (CLK) CC5 IO Card Contact 5 (GND) CC4 IO Card Contact 4 (SPU & USB) CC8 IO Card Contact 8 (SPU & USB) CC1 IO Card Contact 1 (Vcc) CC6 IO Card Contact 6 (SPU & SWP) CC2 IO Card Contact 2 (RST) CC7 IO Card Contact 7 (DATA) Led1 MCU Led CPU activity Led2 Contact Led Contact interface status Shielding Sh1,Sh2 SHIELD PCB main Ground Table 7 : Contact Connector Pinout © 2011, Smartware CONFIDENTIAL 17 USN-3D - Data Sheet 3.4 CONTACTLESS CONNECTOR The SMB is used for contactless interface. A green side led is present in front of the SMB to indicate the RF status. PIN 2,3,4,5 Name Type DESCRIPTION RF_ANT 13.56 MHz RF Signal Gnd GND Table 8 : Contactless Connector Pinout 3.5 SW1 MICROSWITCH Sw DESCRIPTION NodeBase / bit 6 NodeBase / bit 7 RFU Safe Mode ON: Boot in safe Mode OFF: Normal Operation Table 9 : SW1 Definition This switch is common to all USnano of the assembly. For MX6 Only: As this switch is available on master and slave boards, the ON status is the prioritary state. Then, a “OR” is done between the 2 switches (on the master and on the slave board). For example, if “Master.SW1.SafeMode” is ON, the 6 USnano of an MX6 assembly will start in safe mode whatever the state of “Slave.SW1.SafeMode” 3.6 SW70 / SW71 / SW72 MICROSWITCHES Those switches define the SubNode for respectively USnano A, B, & C. Sw DESCRIPTION SubNode / bit 0 SubNode / bit 1 SubNode / bit 2 RFU Table 10 : SW70/71/72 Definition 18 CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet 4 USN-3D - CABLE RECOMMENDATIONS 4.1 CONTACT INTERFACE CABLE 4.1.1 Cable model CAT.5e UTP 24AWG(7/0.195)*4 PAIR INS: HD-PE ID:0.97±0.08mm Outer PVC Jacket, OD:5.5±0.2mm Figure 5: Cable recommendation 4.1.2 Output connector Connector: RJ45 8P8C Plug Male, PinGold Plated 50µ Figure 6: RJ45 Cable Connector © 2011, Smartware CONFIDENTIAL 19 USN-3D - Data Sheet PAIR 1 PAIR 2 PAIR 3 PAIR 4 RJ45 Connector Pinout 1 (WHITE GREEN) 2 (GREEN) 3 (WHITE ORANGE) 4 (ORANGE) 5 (WHITE BLUE) 6 (BLUE) 7 (WHITE BROWN) 8 (BROWN) Chip Signal C3 C5 C4 C8 C1 C6 C2 C7 Table 11 : Contact Cable Definition The other side of the cable should be defined depending of your configuration. Please check that the cable is suitable for your specific connector. 4.2 CONTACTLESS INTERFACE CABLE The defined cable is SMB on USN-3D side. The other side of the cable should be defined depending of your configuration. A 50 ohms coaxial cable should be used. 4.3 CONTACTLESS ANTENNA The USN-3D product should be used with T70x45x2 v1r01 antenna. Please refer to T70x45x2 Datasheet v1r01b for more information about the antenna. 20 CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet 5 USN-3D – CHARACTERISTICS 5.1 ELECTRICAL CHARACTERISTICS P ARAMETER US N- 3 D G e ne ra l P a ra me te rs CO NDITIO NS MAIN P O WER S UP P LY (mu s t b e S ELV, n o e n e rg y Ha z a rd ) Vo lta g e Cu rre n t Cu rre n t Cu rre n t DIMENS IO NS Le n g th Wid th Th ic kn e s s WEIG HT MIN TYP MAX UNITS Co n fig MX6 : V = 12 V / (Typ: Idle s ta te ) Co n fig MX3 : V = 12 V / (Typ: Idle s ta te ) Co n fig US N3 : V = 12 V / (Typ: Idle s ta te ) 10,2 12 1800 820 820 13,8 3000 1420 1420 mA mA mA P CB Thic kne s s 221,3 99,8 221,5 100 1,6 221,7 100,2 mm mm mm Co n fig MX6 Co n fig MX3 Co n fig US N3 624 384 370 40 °C ±4 kV AMB IANT TEMP ERATURE RANG E ES D HARDWARE IMMUNITY Dis c ha rge s on S ma rtc a rd Conta c t Exte rna l ES D S uppre s s or Table 12 : General Characteristics Note: All Tests were performed in a laboratory environment with 40 cm cable (except if specified), within an ambient temperature of +25°C. Precautions should be taken in the end Product to obtain a good thermal dissipation. © 2011, Smartware CONFIDENTIAL 21 USN-3D - Data Sheet 5.2 MECHANICAL CHARACTERISTICS 5.2.1 MX6 Version Figure 7: MX6 Mechanical Schematic 22 CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet 5.2.2 MX3 / USN3 Version Figure 8: MX3/USN3 Mechanical Schematic © 2011, Smartware CONFIDENTIAL 23 USN-3D - Data Sheet 5.3 FRONT PANEL 5.3.1 MX6 Version Figure 9: MX6 Front Panel Mechanical Schematic 5.3.2 MX3 Version Figure 10: MX3 Front Panel Mechanical Schematic 24 CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet 5.3.3 USN3 Version Figure 11: USN3 4f Front Panel Mechanical Schematic © 2011, Smartware CONFIDENTIAL 25 USN-3D - Data Sheet 6 USN-3D – REGULATORY The Models USN3, MX3-3I3P, and MX6-6I3P are CE, FCC /IC modular approval, and RoHS compliant. The Model MX6-6I is CE and RoHS compliant as no emitter is available in this model. Les modèles USN3, MX3-3I3P, et MX6-6I3P sont certifiés CE, FCC / IC approbation modulaire, et RoHS. Le modèle MX6-6I, est certifié CE et RoHS, car il n’y a pas d’émetteur sur ce modèle. Warning 1: The USN-3D product is considered as a component that will be operated in combination with the final equipment. Then, the final equipment (including power supply system) still needs to re-confirm that the whole system complies with the local EMC directives. Le produit USN-3D est considéré comme un composant qui sera intégré dans un équipement hôte. Le fabricant de l’équipement hôte (système d’alimentation inclus) devra alors reconfirmer que le système complet répond toujours aux différentes normes locales. Warning 2: The USN-3D product is a low power radiofrequency emitter, and then specific precaution should be taken to restrict the human presence near the antennas. We recommend that persons should be at least at 20 cm far from the emitting antennas. This information also has to be mentioned in the end product. Access should only be authorized to qualified personal. If the product is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Le produit USN-3D intègre plusieurs émetteurs radiofréquence. Des précautions particulières doivent être prises pour contrôler la présence humaine près des antennes. Nous recommandons qu’aucune personne ne puisse se situer à une distance inférieure à 20 cm des antennes. Cette information doit également être mentionnée sur l’équipement hôte. L’accès doit être restreint au personnel qualifié. Si le produit n’est pas installé et utilisé tel que décrit dans la notice, il peut engendrer des perturbations radioélectriques. Warning 3: To reduce the risk of fire or injury to persons, follow these instructions: All maintenance and servicing of this device must be performed in a safe area away from hazardous locations. Disconnect all power before servicing. Use an earthed bracelet to avoid ESD damages. Afin de réduire les risques de feu ou blessure aux personnes, suivez les instructions suivantes : Toutes les opérations de service et de maintenance doivent être réalisées dans un endroit sécurisé. Déconnectez toutes les alimentations avant manipulation. Utilisez un bracelet relié à la terre pour éviter des dommages liés aux ESD. Warning 4: To comply with directives, the backplane Ethernet cable length should be less than 3 meters. Pour être en conformité avec les normes, le câble du connecteur Ethernet du fond de panier doit avoir une longueur inférieure à 3m. Warning 5: The product has been certified with the antenna named T70x45x2 provided by Smartware. The use of this antenna is mandatory to comply with standards. Le produit a été certifié avec l’antenne T70x45x2 fournies par Smartware. L’utilisation de cette antenne est obligatoire pour être en conformité avec les normes. Warning 6: In case of collocated transmitters, the max number of transmitters in a small place should be maximum of 48. Dans le cas de plusieurs émetteurs, le nombre maximum d’émetteurs dans un petit espace est de 48. Warning 7: The product shall not be modified without written authorisation of Smartware. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Le produit ne doit pas être modifié sans l’autorisation écrite de Smartware. Changements et modifications non approuvés par l’entité responsable de la conformité peut annuler l’autorité de l’utilisateur à opérer cet équipement. Warning 8: The end product’s sticker should mention that it “contains a FCCID: RPM-UN3D and IC: 4783A-UN3D” product. L’étiquette du produit hôte doit mentionner « Contient un FCCID: RPM-UN3D et IC: 4783A-UN3D ». Warning 9: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ----- Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Use of shielded contact cable (with ferrite ref RICHOH RKCF-06-A5) is mandatory to comply with Class B limits of Part 15 of the FCC Rules. NOTE: Cet équipement a été testé et trouvé conforme aux limites d’un appareil de classe B, conformément à la section 15 de la notice FCC relative aux interférences radioélectriques. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Ce matériel génère, utilise et peut émettre de l’énergie haute fréquence. S’il n’est pas installé et utilisé en accord avec les instructions, il peut provoquer des interférences et perturber les communications radio. L’absence d’interférences n’est toutefois pas garantie dans une installation particulière. Si ce matériel provoque des interférences et perturbe la réception radio ou télévisée, ce qui peut être vérifié en mettant le matériel sous et hors tension, nous encourageons l’utilisateur à y remédier en appliquant l’une des mesures suivantes : Modifier l’orientation de l’antenne de réception ou la déplacer. Augmenter la distance séparant le matériel du récepteur. Brancher le matériel sur une prise située sur un circuit différent de celui où se trouve le récepteur. Contacter votre revendeur ou un technicien radio/TV expérimenté. L’utilisation d’un câble d’interface contact blindé (accompagné d’une ferrite RICHOH RKCF-06-A5) est nécessaire pour se conformer aux limites de la classe B de la section 15 de la notice FCC relative aux interférences radioélectriques. Warning 10: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 26 CONFIDENTIAL © 2011, Smartware USN-3D - Data Sheet USN-3D – ORDERING INFORMATION SMARTWARE 11, avenue des Andes 91940 LES ULIS Tél : 01.64.86.25.25 Contact: support@smartware.fr Contact J30 Format Interfaces (ISO7816) Contactless Interfaces (ISO14443/Mifare) Part Number Version 19B00-00060 MX6-6I MX 19B00-00063 MX6-6I3P MX 19B00-00033 MX3-3I3P MX 19B10-00003 USN3 USN3 Description 6 Contact heads 6 Contactless heads (Hardware ready) Adapt Board + Mounting + Alu Front Panel 6 Contact heads 3 Contactless heads (Licences on Main Board) Adapt Board + Mounting + Alu Front Panel 3 Contact heads 3 Contactless heads Adapt Board + Mounting + Alu Front Panel 3 Contact heads 3 Contactless heads Adapt Board + Mounting + Alu Front Panel 4f Table 13 : Ordering Information © 2011, Smartware CONFIDENTIAL 27
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : FA Create Date : 2011:11:14 12:02:52+01:00 Modify Date : 2011:11:14 12:02:52+01:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : FA Title : Microsoft Word - USN-3D_DSHEET Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 10.1.1 (Windows) Document ID : uuid:94830035-542a-4be6-86b3-c628dde31bdf Instance ID : uuid:bdfc6627-3fb6-43f1-9c01-c5172a352e1d Page Count : 27EXIF Metadata provided by EXIF.tools