Sokkia Topcon Z1 Zeal Z1 User Manual Z1 UserMan

Download:
Mirror Download [FCC.gov]
Document ID	603827
Application ID	CVDfqytgEdxauAoQlqy6aA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.02kB (112717 bits)
Date Submitted	2005-11-18 00:00:00
Date Available	2005-11-15 00:00:00
Creation Date	2005-11-18 15:12:11
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-11-18 15:12:11
Document Title	Microsoft Word - _Z1_UserMan.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Andreas Herrmann

27-Sep-2005
ZEAL
[Z1]
User's manual
Rev.01
27-Sep-2005
Revision history
Rev
Date
Content
Rev.01
27-Sep-2005
First edition
27-Sep-2005
Contents
1.General Description ......................................................................................................... 5
2.Product specification ........................................................................................................5
3.Pin Layout ........................................................................................................................ 6
4.Start Mode ........................................................................................................................ 6
Nomal Mode....................................................................................................... 6
UART Setting Value Mode ................................................................................ 6
Firmware Rewriting Mode ................................................................................ 6
Automatic Scanning Mode ................................................................................ 6
Automatic Connection Mode ............................................................................. 7
5.Operation Mode ................................................................................................................ 7
Command Mode................................................................................................. 7
Online Mode....................................................................................................... 7
Park Mode.......................................................................................................... 7
Escape Mode ...................................................................................................... 7
Scan Escape Mode ............................................................................................. 7
Scan Mode.......................................................................................................... 7
Standby Mode .................................................................................................... 7
6.Command.......................................................................................................................... 8
7.Result code........................................................................................................................ 9
Example:How to use “Zeal”............................................................................................... 10
27-Sep-2005
This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
The antenna shown in this filing must not be co-located or operated in conjunction with
any other antenna or transmitter. End users may not be provided with the module
installation instructions. OEM integrators and end users must be provided with
transmitter operating conditions for satisfying RF exposure compliance.
For portable applications OEM integrators need no SAR evaluation. The max
source-based time-averaged output of 0.46 mW is below the low threshold of 24mW for
d < 2.5 cm.
This equipment complies with FCC radiation exposure limits set forth for
uncontrolled equipment and meets the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65. This equipment has very low levels of
RF energy that it is deemed to comply without testing of specificabsorption ratio (SAR).
27-Sep-2005
1.General Description
This product is Bluetooth communication unit with UART I/F.
2.Product specification
Item
Content
Product name
ZEAL
Product ID
Z1
Bluetooth Version
1.2
I/F
Protocol
L2CAP, SDP, RFCOMM
Profile
GAP, SPP, DUN
Data Rate
723.2/57.6kbps(asymmetrical. Max)
Modulation
FHSS/GFSK 1Mbps, 1600hop/sec.
Output Power
Class2
Protocol
Asynchronous Serial Communication
UART
I/F
(Hardware Flow Control)
Signal Level
Supply power
Baud rate
9600bps(Default)
Connector
LPC-12FDS+C
[HONDA TSUSHIN KOGYO CO., LTD.]
Power Supply Voltage
+2.9 - +3.6V DC (Single power supply)
Operating Temperature Range
-25 - +85℃
Outside Dimensions
35.0mm(L), 26.0(W), 4.5mm(H)
27-Sep-2005
3.Pin Layout
PIO0
RXD
TXD
PIO1
GND
PIO2
RTS
CTS
PIO3
10
MODE0
11
MODE1
12
VCC
*The signal is a pull-up on the inside in 51KΩ
4.Start Mode
The start mode changes by the state of the mode pin when the power supply is turned
on.
Nomal Mode
(MODE0,MODE1) = (1,1)
UART communications setting:9600bps,Data8bit,StopBit 1,Parity none
It starts by the command mode.
UART Setting Value Mode
(MODE0,MODE1) = (0,1)
It starts by the UART setting to which internal is set, and it becomes a
command mode.
Firmware Rewriting Mode
(MODE0,MODE1) = (0,0)
When Farmuuea is rewritten with a special tool, it uses it.
Automatic Scanning Mode
(MODE0,MODE1) = (1,0)
27-Sep-2005
It starts by the UART setting to which internal is set, and it becomes a
scanning mode.
The mode is set beforehand according to "BTOM" command.
Automatic Connection Mode
(MODE0,MODE1) = (1,0)
It starts by the UART setting to which internal is set, and the automatic
connection mode.
The mode is set beforehand according to "BTOM" command.
5.Operation Mode
The operation mode changes by the command input.
Command Mode
Command input waiting state.
Online Mode
Bluetooth connection state of possible data communication.The input value is
delivered to the other party equipment as data.
Park Mode
State of low power consumption of Bluetooth(park)
Escape Mode
It is a state that the command can be input with the Bluetooth connection
maintained.
Scan Escape Mode
It is a state that the command can be input with the scanning maintained.
Scan Mode
State of scanning of Bluetooth
Standby Mode
State of low power consumption to stop Bluetooth function
27-Sep-2005
6.Command
The command character and the parameter are input following "BT".
LIST
Command
Function
Parameter
To the scan mode
None or access code
UART baudrate change
Bit rate(100bps unit)
BM
UART communication mode change
Value of mode flag
Connected beginning
None or clock offset
CU
Connected beginning
UUID or
to specified UUID
UUID+clock offset
Disconect or Release of scan mode
DM
Disconect message setting
State confirmation
Connected condition flag setting
Value of Condition flag
guard time setting
Guard time (80ms unit)
To the standby mode
Inquiry
Link key clear
Internal setting display
BDAddress display
OC
Device Class setting
Device Class
OM
Auto mode setting
Value of mode flag
Passkey change
Bluetooth Passkey
To the park mode
Interval,None=Release
QM
park mode
Message character string
Message character string
Detect maximum number
Value of setting flag
Transition message setting
Escape mode to Online mode
Information at connection equipment Bdaddress etc
TT
Information at connection equipment Bdaddress etc
Various parameter settings
Value of parameter
Equipment name setting
Equipment name
27-Sep-2005
7.Result code
Character string that notifies result of command.
LIST
Result code
Meaning
ACKN
Command receipt
CONN
Bluetooth connection completion
DISC
Disconnect
TERM
Command execution completion
NG00
Command execution failure
NG01
Undefined command
NG04
Page timeout
NG08
Connection timeout
NG0C
Command of no permission
NG12
The value of the parameter is illegal.
NG30
L2CAP connection failure of SDP
NG31
L2CAP setting failure of SDP
NG32
Server channel acquisition failure
NG40
L2CAP connection failure of RFCOMM
NG41
L2CAP setting failure of RFCOMM
NG42
Data channel establishment failure of RFCOMM
NG43
Signal channel establishment failure of RFCOMM
NG44
DLCI becomes empty of RFCOMM
NG45
PN command failure of RFCOMM
NG46
MSC command failure of RFCOMM
27-Sep-2005
Example:How to use “Zeal”
■Preparation:
●Settings of your terminal software
Baud rate:9600
Data:8bit
Parity:none
Stop:1bit
Flow Control hardware
■When “Zeal” is used as a slave:
1. Issue a “BTA” command to “Zeal”.
2. Execute Device Discovery from the other Bluetooth terminal.
3. Execute Service Discovery when a device named ““Zeal”” is found.
4. Establish a connection when the “SerialPort” service is found.
■When “Zeal” is used as a master:
1. Issue a “BTI1” command to “Zeal” and execute Device Discovery.
(Change the parameter depending on the number of neighborhood devices,
e.g. if 3 devices, “BTI3”.)
2. Check whether the Bluetooth address found is the address of the other
Bluetooth device.
3. Set destination by “BTT1************”.
(************ indicates the address of the other Bluetooth device to which
the connection is made.)
4. Issue a “BTC” command.
If “CONN” is displayed, connection is successful.
●How to disconnect “Zeal”:
・
When “Zeal” disconnects itself, wait for the guard time to end(The default
is 8seconds. The period can be changed by a BTG command) and then input a
“@@@BTD” command.
If “DISC” is displayed, disconnection is successful.
27-Sep-2005
■Security function:
●How to deactivate security function
1. Turn off the security function of the other Bluetooth device.
2. Turn off the security function of “Zeal”.
Issue a “BTF04” command.
(Note: The value set by the BTF command is stored.)
●How to activate authentication function
1. Issue a “BTF06” command.
(Authentication is executed upon request from one device even if the
security function of the other Bluetooth device is deactivated.)
2.
Input the same Password (PIN code) as the one set for “Zeal” when the
other Bluetooth device
requests a Password (PIN code) upon connection.
Note:
The same Password (PIN code) should be used in devices like “Zeal” for
which a Password (PIN code) upon connection.
(The password (PIN code is not requested) can be changed by a “BTP”
command.
The default is “0123”.)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 11
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:9ce3f7cd-ce7c-46c2-95e6-0b68d8ee24eb
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:11:18 15:12:11+01:00
Create Date                     : 2005:11:18 15:12:11+01:00
Document ID                     : uuid:1a8f2dd8-c2e1-4281-8130-56371c74b52e
Format                          : application/pdf
Title                           : Microsoft Word - _Z1_UserMan.doc
Creator                         : Andreas Herrmann
Author                          : Andreas Herrmann

EXIF Metadata provided by EXIF.tools