Sonicwall 06C 802.11b/g/n Router User Manual SonicWALL TZ 210 Series Getting Started Guide

Download:
Mirror Download [FCC.gov]
Document ID	1036525
Application ID	baO/y51v4SmHwHBgD/fdbQ==
Document Description	Manual Part 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	93.35kB (1166879 bits)
Date Submitted	2008-11-26 00:00:00
Date Available	2008-11-26 00:00:00
Creation Date	2008-11-24 18:35:12
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-11-24 18:35:18
Document Title	SonicWALL TZ 210 Series Getting Started Guide
Document Creator	FrameMaker 7.1
Document Author:	SonicWALL

TZ_210_GSG.book Page 65 Thursday, November 13, 2008 7:41 PM
SonicWALL Secure Wireless Network
Integrated Solutions Guide
This 512 page book is available in hardcopy. Order the book
directly from Elsevier Publishing at:

The Official Guide to SonicWALL’s market-leading wireless
networking and security devices.
SonicWALL TZ 210 Series Getting Started Guide Page 65
TZ_210_GSG.book Page 66 Thursday, November 13, 2008 7:41 PM
Page 66 SonicWALL Secure Wireless Network Integrated Solutions Guide
TZ_210_GSG.book Page 67 Thursday, November 13, 2008 7:41 PM
Product Safety and Regulatory Information
In this Section:
This section provides regulatory, trademark, and copyright information.
•
•
•
•
•
•
•
•
Safety and Regulatory Information for the SonicWALL TZ 210 Appliance - page 68
Safety and Regulatory Information in German for the SonicWALL TZ 210 Appliance - page 69
FCC Part 15 Class B Notice for the SonicWALL TZ 210 Appliance - page 70
Safety and Regulatory Information for the SonicWALL TZ 210 Wireless Appliance - page 71
Safety and Regulatory Information in German for the SonicWALL TZ 210 Wireless Appliance - page 72
FCC Part 15 Class B Notice for the SonicWALL TZ 210 Wireless Appliance - page 73
Copyright Notice - page 75
Trademarks - page 75
SonicWALL TZ 210 Series Getting Started Guide Page 67
TZ_210_GSG.book Page 68 Thursday, November 13, 2008 7:41 PM
Safety and Regulatory Information for the
SonicWALL TZ 210 Appliance
Regulatory Model/Type
Product Name
APL20-063
TZ 210
Lithium Battery Warning
Mounting the SonicWALL
•
•
•
•
•
•
Mount in a location away from direct sunlight and sources
of heat. A maximum ambient temperature of 104º F (40º C)
is recommended.
Route cables away from power lines, fluorescent lighting
fixtures, and sources of noise such as radios, transmitters,
and broadband amplifiers
The included power cord is intended for use in North
America only. For European Union (EU) customers, a power
cord is not included.
Ensure that no water or excessive moisture can enter the
unit.
Allow unrestricted airflow around the unit and through the
vents on the side of the unit. A minimum of 1 inch
(25.44mm) clearance is recommended.
Consideration must be given to the connection of the
equipment to the supply circuit and the effect of overloading the circuits has minimal impact on overcurrent
protection and supply wiring. Appropriate consideration
of equipment nameplate ratings must be used when
addressing this concern.
Page 68 Safety and Regulatory Information for the SonicWALL TZ 210 Appliance
The Lithium Battery used in the SonicWALL security appliance
may not be replaced by the user. Return the SonicWALL
security appliance to a SonicWALL-authorized service center for
replacement with the same or equivalent type recommended by
the manufacturer. If, for any reason, the battery or SonicWALL
security appliance must be disposed of, do so following the
battery manufacturer's instructions.
Cable Connections
All Ethernet and RS232 (Console) cables are designed for intrabuilding connection to other equipment. Do not connect these
ports directly to communication wiring or other wiring that exits
the building where the SonicWALL is located.
Power Supply Information
If the power supply is missing from your SonicWALL product
package, please contact SonicWALL Technical Support at 408752-7819 for a replacement. This product should only be used
with a UL listed power supply marked “Class 2” or “LPS”, with an
output rated 12 VDC, minimum 1.66 A.
TZ_210_GSG.book Page 69 Thursday, November 13, 2008 7:41 PM
Safety and Regulatory Information in
German for the SonicWALL TZ 210
Appliance
Weitere Hinweise zur Montage
•
•
•
•
•
•
Wählen Sie für die Montage einen Ort, der keinem direkten
Sonnenlicht ausgesetzt ist und sich nicht in der Nähe von
Wärmequellen befindet. Die Umgebungstemperatur darf
nicht mehr als 40 °C betragen.
Führen Sie die Kabel nicht entlang von Stromleitungen,
Leuchtstoffröhren und Störquellen wie Funksendern oder
Breitbandverstärkern.
Das beigefügte Netzkabel ist nur für den Betrieb in
Nordamerika vergesehen. Für Kunden in der Europäischen
Union ist kein Kabel beigefügt.
Stellen Sie sicher, dass das Gerät vor Wasser und hoher
Luftfeuchtigkeit geschützt ist.
Stellen Sie sicher, dass die Luft um das Gerät herum
zirkulieren kann und die Lüftungsschlitze an der Seite des
Gehäuses frei sind. Hier ist ein Belüftungsabstand von
mindestens 26 mm einzuhalten.
Vergewissern Sie sich, dass das Gerät sicher im Rack
befestigt ist.
Hinweis zur Lithiumbatterie
Die in der Internet Security Appliance von SonicWALL
verwendete Lithiumbatterie darf nicht vom Benutzer
ausgetauscht werden. Zum Austauschen der Batterie muss die
SonicWALL in ein von SonicWALL autorisiertes Service-Center
gebracht werden. Dort wird die Batterie durch denselben oder
entsprechenden, vom Hersteller empfohlenen Batterietyp
ersetzt. Beachten Sie bei einer Entsorgung der Batterie oder der
SonicWALL Internet Security Appliance die diesbezüglichen
Anweisungen des Herstellers.
Kabelverbindungen
Alle Ethernet- und RS232-C-Kabel eignen sich für die
Verbindung von Geräten in Innenräumen. Schließen Sie an die
Anschlüsse der SonicWALL keine Kabel an, die aus dem
Gebäude herausgeführt werden, in dem sich das Gerät befindet.
Informationen zur Stromversorgung
Sollte das Netzteil nicht im Lieferumfang der SonicWALL
enthalten sein, wenden Sie sich diesbezüglich an den
technischen Support von SonicWALL (Tel.: +1-408-752-7819).
Dieses Produkt darf nur in Verbindung mit einem nach den
Normen der Underwriter Laboratories, USA als „UL-gelistet“
zugelassenen Netzteil der Kategorie „Class 2“ oder „LPS“
verwendet werden. Ausgang: 12 VDC Gleichsspannung, mind.
1,66 A.
SonicWALL TZ 210 Series Getting Started Guide Page 69
TZ_210_GSG.book Page 70 Friday, November 14, 2008 5:26 PM
FCC Part 15 Class B Notice for the
SonicWALL TZ 210 Appliance
NOTE: This equipment was tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. And, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If the
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try and correct the interference using one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from
the receiver connection.
•
Consult SonicWALL for assistance.
Complies with EN55022 Class B and CISPR22 Class B.
*Refer to the label on the bottom of the unit for device information
including Class A or Class B FCC information.
Canadian Radio Frequency Emissions Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB003 du Canada.
Page 70 FCC Part 15 Class B Notice for the SonicWALL TZ 210 Appliance
Declaration of Conformity
Application of
council Directive
2004/108/EC (EMC) and 2006/95/EC
(LVD)
Standards to which
conformity is
declared
EN 55022 (2006) Class B
EN 55024 (1998) +A2
EN 61000-3-2 (2006)
EN 61000-3-3 (1995) +A2
EN 60950-1 (2001) +A11
National Deviations: AT, AU, BE, CH, CN,
CZ, DE, DK, FI, FR, GB, GR, HU, IE, IL,
IN, IT, JP, KR, NL, NO, PL, SE, SG, SI
VCCI Statement
Regulatory Information for Korea
Ministry of Information and Telecommunication
Certification Number
All products with country code “” (blank) and “A” are made in the USA.
All products with country code “B” are made in China.
All products with country code “C” or “D” are made in Taiwan R.O.C.
TZ_210_GSG.book Page 71 Friday, November 14, 2008 4:36 PM
Safety and Regulatory Information for the
SonicWALL TZ 210 Wireless Appliance
Regulatory Model/Type
Product Name
APL20-065
TZ 210 Wireless, TZ 210 W
APL20-064
TZ 210 Wireless, TZ 210 W
Mounting the SonicWALL
•
•
•
•
•
•
Mount in a location away from direct sunlight and sources
of heat. A maximum ambient temperature of 104º F (40º C)
is recommended.
Route cables away from power lines, fluorescent lighting
fixtures, and sources of noise such as radios, transmitters,
and broadband amplifiers
The included power cord is intended for use in North
America only. For European Union (EU) customers, a power
cord is not included.
Ensure that no water or excessive moisture can enter the
unit.
Allow unrestricted airflow around the unit and through the
vents on the side of the unit. A minimum of 1 inch
(25.44mm) clearance is recommended.
Consideration must be given to the connection of the
equipment to the supply circuit and the effect of overloading the circuits has minimal impact on overcurrent
protection and supply wiring. Appropriate consideration
of equipment nameplate ratings must be used when
addressing this concern.
Lithium Battery Warning
The Lithium Battery used in the SonicWALL security appliance
may not be replaced by the user. Return the SonicWALL security
appliance to a SonicWALL-authorized service center for
replacement with the same or equivalent type recommended by
the manufacturer. If, for any reason, the battery or SonicWALL
security appliance must be disposed of, do so following the
battery manufacturer's instructions.
Cable Connections
All Ethernet and RS232 (Console) cables are designed for intrabuilding connection to other equipment. Do not connect these
ports directly to communication wiring or other wiring that exits
the building where the SonicWALL is located.
Power Supply Information
If the power supply is missing from your SonicWALL product
package, please contact SonicWALL Technical Support at 408752-7819 for a replacement. This product should only be used
with a UL listed power supply marked “Class 2” or “LPS”, with an
output rated 12 VDC, minimum 1.66 A.
SonicWALL TZ 210 Series Getting Started Guide Page 71
TZ_210_GSG.book Page 72 Friday, November 14, 2008 4:36 PM
Safety and Regulatory Information in
German for the SonicWALL TZ 210
Wireless Appliance
Weitere Hinweise zur Montage
•
•
•
•
•
•
Wählen Sie für die Montage einen Ort, der keinem direkten
Sonnenlicht ausgesetzt ist und sich nicht in der Nähe von
Wärmequellen befindet. Die Umgebungstemperatur darf
nicht mehr als 40 °C betragen.
Führen Sie die Kabel nicht entlang von Stromleitungen,
Leuchtstoffröhren und Störquellen wie Funksendern oder
Breitbandverstärkern.
Das beigefügte Netzkabel ist nur für den Betrieb in
Nordamerika vergesehen. Für Kunden in der Europäischen
Union ist kein Kabel beigefügt.
Stellen Sie sicher, dass das Gerät vor Wasser und hoher
Luftfeuchtigkeit geschützt ist.
Stellen Sie sicher, dass die Luft um das Gerät herum
zirkulieren kann und die Lüftungsschlitze an der Seite des
Gehäuses frei sind. Hier ist ein Belüftungsabstand von
mindestens 26 mm einzuhalten.
Vergewissern Sie sich, dass das Gerät sicher im Rack
befestigt ist.
Hinweis zur Lithiumbatterie
Die in der Internet Security Appliance von SonicWALL
verwendete Lithiumbatterie darf nicht vom Benutzer
ausgetauscht werden. Zum Austauschen der Batterie muss die
SonicWALL in ein von SonicWALL autorisiertes Service-Center
gebracht werden. Dort wird die Batterie durch denselben oder
entsprechenden, vom Hersteller empfohlenen Batterietyp
ersetzt. Beachten Sie bei einer Entsorgung der Batterie oder der
SonicWALL Internet Security Appliance die diesbezüglichen
Anweisungen des Herstellers.
Kabelverbindungen
Alle Ethernet- und RS232-C-Kabel eignen sich für die
Verbindung von Geräten in Innenräumen. Schließen Sie an die
Anschlüsse der SonicWALL keine Kabel an, die aus dem
Gebäude herausgeführt werden, in dem sich das Gerät
befindet.
Informationen zur Stromversorgung
Sollte das Netzteil nicht im Lieferumfang der SonicWALL
enthalten sein, wenden Sie sich diesbezüglich an den
technischen Support von SonicWALL (Tel.: +1-408-752-7819).
Dieses Produkt darf nur in Verbindung mit einem nach den
Normen der Underwriter Laboratories, USA als „UL-gelistet“
zugelassenen Netzteil der Kategorie „Class 2“ oder „LPS“
verwendet werden. Ausgang: 12 VDC Gleichsspannung, mind.
1,66 A.
Page 72 Safety and Regulatory Information in German for the SonicWALL TZ 210 Wireless Appliance
TZ_210_GSG.book Page 73 Friday, November 14, 2008 4:36 PM
FCC Part 15 Class B Notice for the
SonicWALL TZ 210 Wireless Appliance
NOTE: This equipment was tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. And, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If the
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try and correct the interference using one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from the
receiver connection.
•
Consult SonicWALL for assistance.
Complies with EN55022 Class B and CISPR22 Class B.
*Refer to the label on the bottom of the unit for device information
including Class A or Class B FCC information.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 centimeters (7.9 inches)
between the radiator (antenna) and your body. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter. For more information regarding the above statement, please
contact SonicWALL, Inc. at:
1143 Borregas Avenue
Sunnyvale, CA, 94089-1306
1-408-745-9600
North American Authorized Channels
SonicWALL declares that the APL20-065 (FCC ID: QWU-06C)
(IC: 4408A-06C) and APL20-064 (FCC ID: QWU-06D) (IC: 4408A-06D)
when sold in US or Canada is limited to CH1~CH11 by specified
firmware controlled in the USA.
Canadian Radio Frequency Emissions Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB003 du Canada.
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
SonicWALL TZ 210 Series Getting Started Guide Page 73
TZ_210_GSG.book Page 74 Friday, November 14, 2008 4:36 PM
Declaration of Conformity
Certificate #: EU00165-A
SonicWALL tímto prohlašuje, že tento APL20-065/APL20-064 je ve shodě se základními
požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Application of council
Directive
2004/108/EC (EMC)
2006/95/EC (LVD)
1999/5/EC (R&TTE)
Standard(s) to which
conformity is declared
EN 55022 (1998) +A1 +A2 Class B
EN 55024 (1998) +A2 +A2
EN 61000-3-2 (2000) +A2
EN 61000-3-3 (1995) A2
EN 60950-1 (2001) +A11
National Deviations: AR, AT, AU, BE, CA, CH,
CN, CZ, DE, DK, FI, FR, GB, GR, HU, IL, IN, IT,
JP, KE, KR, MY, NL, NO, PL, SE, SG, SI, SK, US
EN 300 328 V1.7.1: (2006)
EN 301 489-1 V1.6.1: (2005) /-17 V1.2.1: (2002)
EN50385 (2002)
Undertegnede SonicWALL erklærer herved, at følgende udstyr APL20-065/APL20-064
overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Manufacturer/
Responsible Party
SonicWALL, Inc.
1143 Borregas Avenue
Sunnyvale, CA 94089 USA
Type of Equipment
Information Technology Equipment
Internet Security (Firewall/VPN) Appliance, with
802.11b/g/n Wireless Router Tabletop with
external power supply.
Type Numbers
APL20-065, APL20-064
May be Marketed as
TZ 210 Wireless, TZ 210 W
Käesolevaga kinnitab SonicWALL seadme APL20-065/APL20-064 vastavust direktiivi
1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele
sätetele.
Hereby, SonicWALL, declares that this APL20-065/APL20-064 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Por medio de la presente SonicWALL declara que el APL20-065/APL20-064 cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ SonicWALL ΔΗΛΩΝΕΙ ΟΤΙ APL20-065/APL20-064 ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ
1999/5/ΕΚ.
Par la présente SonicWALL déclare que l'appareil APL20-065/APL20-064 est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
I, the undersigned, hereby declare that the equipment specified above
conforms to the above Directives and Standards. Quality control
procedures will ensure series production of equipment will be compliant.
Signature /s/ John Gmuender__________
V.P. Engineering
Hiermit erklärt SonicWALL, dass sich das Gerät APL20-065/APL20-064 in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen
Bestimmungen der Richtlinie 1999/5/EG befindet.
Date _10/22/08_
Page 74 FCC Part 15 Class B Notice for the SonicWALL TZ 210 Wireless Appliance
Con la presente SonicWALL dichiara che questo APL20-065/APL20-064 è conforme ai
requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Ar šo SonicWALL deklarē, ka APL20-065/APL20-064 atbilst Direktīvas 1999/5/EK
būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Šiuo SonicWALL deklaruoja, kad šis APL20-065/APL20-064 atitinka esminius reikalavimus
ir kitas 1999/5/EB Direktyvos nuostatas.
TZ_210_GSG.book Page 75 Friday, November 14, 2008 4:36 PM
Copyright Notice
© 2008 SonicWALL, Inc.
Hierbij verklaart SonicWALL dat het toestel APL20-065/APL20-064 in overeenstemming
is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Hawnhekk, SonicWALL, jiddikjara li dan APL20-065/APL20-064 jikkonforma mal-ħtiġijiet
essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Alulírott, SonicWALL nyilatkozom, hogy a APL20-065/APL20-064 megfelel a vonatkozó
alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Niniejszym SonicWALL oświadcza, że APL20-065/APL20-064 jest zgodny z zasadniczymi
wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
SonicWALL declara que este APL20-065/APL20-064 está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
SonicWALL izjavlja, da je ta APL20-065/APL20-064 v skladu z bistvenimi zahtevami in
ostalimi relevantnimi določili direktive 1999/5/ES.
SonicWALL týmto vyhlasuje, že APL20-065/APL20-064 spĺňa základné požiadavky a
všetky príslušné ustanovenia Smernice 1999/5/ES.
SonicWALL vakuuttaa täten että APL20-065/APL20-064 tyyppinen laite on direktiivin
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Härmed intygar SonicWALL att denna APL20-065/APL20-064 står I överensstämmelse
med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av
direktiv 1999/5/EG.
All rights reserved.
Under the copyright laws, this manual or the software described within,
cannot be copied, in whole or part, without the written consent of the
manufacturer, except in the normal use of the software to make a
backup copy. The same proprietary and copyright notices must be
affixed to any permitted copies as were affixed to the original. This
exception does not allow copies to be made for others, whether or not
sold, but all of the material purchased (with all backup copies) can be
sold, given, or loaned to another person. Under the law, copying
includes translating into another language or format.
Specifications and descriptions subject to change without notice.
Trademarks
SonicWALL is a registered trademark of SonicWALL, Inc.
Microsoft Windows 98, Windows Vista, Windows 2000, Windows XP,
Windows Server 2003, Internet Explorer, and Active Directory are
trademarks or registered trademarks of Microsoft Corporation.
Other product and company names mentioned herein may be
trademarks and/or registered trademarks of their respective companies
and are the sole property of their respective manufacturers.
SonicWALL TZ 210 Series Getting Started Guide Page 75
TZ_210_GSG.book Page 76 Thursday, November 13, 2008 7:41 PM
Notes
Page 76 Notes
TZ_210_GSG.book Page 1 Thursday, November 13, 2008 7:41 PM
SonicWALL, Inc.
1143 Borregas Avenue
Sunnyvale CA 94089-1306
T +1 408.745.9600
F +1 408.745.9300
www.sonicwall.com
P/N 232-001620-50
Rev A 11/08
©2008 SonicWALL, Inc. is a registered trademark of SonicWALL, Inc. Other product names mentioned herein may be trademarks and/or registered trademarks of their respective companies. Specifications and descriptions subject to change without notice.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
XMP Toolkit                     : 3.1-701
Modify Date                     : 2008:11:24 18:35:18+08:00
Create Date                     : 2008:11:24 18:35:12+08:00
Metadata Date                   : 2008:11:24 18:35:18+08:00
Creator Tool                    : FrameMaker 7.1
Format                          : application/pdf
Title                           : SonicWALL TZ 210 Series Getting Started Guide
Creator                         : SonicWALL
Document ID                     : uuid:23b1aaea-4fa3-4a7c-9253-234e223e980a
Instance ID                     : uuid:71ded548-fd7c-40ed-b551-295b962059b3
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Has XFA                         : No
Page Count                      : 13
Author                          : SonicWALL

EXIF Metadata provided by EXIF.tools