Sonova USA RCI Phonak RC invisity User Manual UsersManual

Phonak Inc Phonak RC invisity UsersManual

UsersManual

P:\r&d\projekte\Project - WFS\Phase4 Prototypes & Tools\Documents\User Manual remote control E V1.1.doc Invisity Remote Control User manual The invisity remote control is a waterproof handheld keyring format device. It is used to discretely change the frequency/channel on the invisity 4 channel device. To ensure an optimal result, the remote control should be activated with a distance of maximum 60cm from the receiver (Fig.1). The invisity remote control requires to be programmed together with the invisity receiver. To program both devices, please follow the user manual of the invisity programming unit (IPU). Fig.1 Operation Flip to open the remote control. The push-buttons are used for the following functions. Programming mode Simultaneously push key #2 and #3 for a short time (< 1 sec) to get the red light. The programming mode is now active either for 3 minutes or till you push one of the keys for a short time. Place the RC Invisity into the Programmer Unit (IPU) as indicated on your screen. Start the programming procedure. Change of channel Push key #1 equal times to set the required channel (e.g. push 3x for channel 3, 4x for channel 4). Key #1 Key #3 Key #2 ~60cm (23inches)
P:\r&d\projekte\Project - WFS\Phase4 Prototypes & Tools\Documents\User Manual remote control E V1.1.doc Scan frequency Push key #1 more than 2 sec to initiate scan mode, invisity will stop on the first frequency scanned (only programmed frequencies are recognized), push 2 sec again to continue scan. . Battery end of live control Push simultaneously key #2 and #3 for 3 sec to get red LED light. Constant light means the battery is OK. Blinking light means the battery is weak. To change the battery, please contact your Phonak distributor. Warning : do not use your RC invisity close to hospital or in airplane. Phonak Communications AG CE Längasse 17 CH-3280 Murten Switzerland Phone +41 (0)26 672 9672 Fax +41 (0)26 672 9677 E-mail info@phonakcom.ch www.phonakcom.ch 029-3048

Navigation menu