Sonova USA RCI Phonak RC invisity User Manual UsersManual

Download:
Mirror Download [FCC.gov]
Document ID	598383
Application ID	WGJ4JMQFp2PWCpugadv3FA==
Document Description	UsersManual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.48kB (293536 bits)
Date Submitted	2005-11-02 00:00:00
Date Available	2005-12-01 00:00:00
Creation Date	2005-10-12 14:37:51
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2005-10-12 14:37:51
Document Title	Microsoft Word - User Manual remote control E V1.1.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	13sholzer

Invisity Remote Control
User manual
The invisity remote control is a waterproof handheld keyring format
device. It is used to discretely change the frequency/channel on the
invisity 4 channel device. To ensure an optimal result, the remote
control should be activated with a distance of maximum 60cm from
the receiver (Fig.1).
The invisity remote control requires to be programmed together
with the invisity receiver. To program both devices, please follow the
user manual of the invisity programming unit (IPU).
~60cm
(23inches)
Fig.1
Operation
Key
#2
Key #1
Key #3
Flip to open the remote control. The push-buttons are used for the
following functions.
Programming mode
Simultaneously push key #2 and #3 for
a short time (< 1 sec) to get the red
light. The programming mode is now
active either for 3 minutes or till you
push one of the keys for a short time.
Place the RC Invisity into the
Programmer Unit (IPU) as indicated on
your screen. Start the programming
procedure.
Change of channel
Push key #1 equal times to set the
required channel (e.g. push 3x for
channel 3, 4x for channel 4).
P:\r&d\projekte\Project - WFS\Phase4 Prototypes & Tools\Documents\User
Manual remote control E V1.1.doc
Scan frequency
Push key #1 more than 2 sec to initiate
scan mode, invisity will stop on the first
frequency scanned (only programmed
frequencies are recognized), push 2 sec
again to continue scan.
Battery end of live control Push simultaneously key #2 and #3 for
3 sec to get red LED light. Constant
light means the battery is OK. Blinking
light means the battery is weak. To
change the battery, please contact your
Phonak distributor.
Warning : do not use your RC invisity close to hospital or in airplane.
Phone
+41 (0)26 672 9672
Fax
+41 (0)26 672 9677
E-mail
info@phonakcom.ch
www.phonakcom.ch
CE
029-3048
Phonak Communications AG
Längasse 17
CH-3280 Murten
Switzerland
P:\r&d\projekte\Project - WFS\Phase4 Prototypes & Tools\Documents\User
Manual remote control E V1.1.doc

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2005:10:12 14:37:51
Modify Date                     : 2005:10:12 14:37:51
Title                           : Microsoft Word - User Manual remote control E V1.1.doc
Creator                         : PScript5.dll Version 5.2
Author                          : 13sholzer

EXIF Metadata provided by EXIF.tools