Sony Group BM153 Bluetooth Module User Manual SPEC BM153 V4 6 10012013

Sony Corporation Bluetooth Module SPEC BM153 V4 6 10012013

Contents

BM153_User Manual_REV 65298

Download: Sony Group BM153 Bluetooth Module User Manual SPEC BM153 V4 6 10012013
Mirror Download [FCC.gov]Sony Group BM153 Bluetooth Module User Manual SPEC BM153 V4 6 10012013
Document ID2226020
Application IDbdrkwqMdIYKX9e5ISGnNUg==
Document DescriptionBM153_User Manual_REV 65298
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize151.25kB (1890621 bits)
Date Submitted2014-03-26 00:00:00
Date Available2014-03-27 00:00:00
Creation Date2013-08-29 22:48:18
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2014-03-25 15:52:34
Document TitleMicrosoft Word - SPEC-BM153-V4.6 10012013.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

®
Product Specification
BM153 Class 2 Multimedia Module
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Qualified
Bluetooth Spec. V3.0 (V2.1+EDR)Compliant
Class 2 type Output Power
Support Firmware Upgrade
USB 1.1 and UART Host Interface
Multi-Configurable I2S, PCM or SPDIF Interface
Integrated Switched-Mode Regulator
Integrated Battery Charger
Integrated Microphone bias
Integrated LED Driver
Built in 16-bit Stereo Codec- 95dB SNR for DAC
Factory configurable to either 1.8V or 3.3V supply.
Supports up to 32Mbits of External Flash Memory
(16Mbits Typical Requirement)
Enhanced Audibility and Noise Cancellation
PCB material:FR4
PCB Surface treatment: Immersion gold
Size: 21mm x 13.5 mm x 2.35mm
Weight: 0.8g
CSR, BC57E687C
Jan. 2013
Product Description:
The BM153 is a Class 2 Bluetooth sub-system using BlueCore5Multimedia External chipset from leading Bluetooth chipset
supplier Cambridge Silicon Radio.
BM153 interfaces to 8Mbit of external Flash memory When used
with the CSR Bluetooth software stack, it provides a fully compliant
Bluetooth system to V3.0 of the specification for data and voice
communications
The module and device firmware is fully compliant with the
Bluetooth specification V3.0
Applications:
•
•
•
•
•
•
System Architecture
•
Hands-free Car Kit
Stereo Headset
AV Headphones
Echo Cancellation
High Performance Mono Headsets
Analogue and USB Multimedia Dongles
Wireless Speakers
Specifications:
Operating Frequency Band
Bluetooth Specification
Output Power Class
Max. Output Power
Date Rate
Channel No.
Modulation Type
Operating Voltage
Host Interface
Audio Interface
Flash Memory Size
Dimension
Specifications are subject to change without prior notice
Spec-BM153-V4.6
2.4GHz ~ 2.48GHz unlicensed ISM band
BT V3.0 (V2.1+EDR)
Class 2
2.5mW
3Mbps
79
GFSK π/4 DQPSK 8DPSK
1.8V / 3.3V
USB 1.1 or UART
PCM, I2S, SPDIF
8M,16M, or 32Mbits
21mm (L) x 13.5 (W) mm x 2.35mm (H)
Page 1 of 7
www.sunitec-cn.com
®
Product Specification
Electrical Characteristics
Absolute Maximum Rating
Storage Temperature
Supply Voltage, (V_CHG)
Min
-40°C
-0.30V
Max
+85°C
+6.5V
Recommended Operating Conditions
Operating Temperature Range
Supply Voltage, (V_BAT)
Supply Voltage, (V_CHG)
Min
-20°C
2.5V
4.5V
Max
+70°C
4.2V
5.75V
Power Consumption
SCO Connection HV3 (30ms interval sniff mode)
SCO Connection HV1
ACL Data Transfer 115.2Kbps UART no traffic (Master)
ACL Data Transfer 115.2Kbps UART no traffic (Slave)
Units
mA
mA
mA
mA
Average
mA
mA
mA
TBD
TBD
TBD
21
40
4.4
15
CODEC
Microphone inputs and ADC/channel
DAC and loudspeaker driver, no signal/channel
Digital audio processing subsystem
VBAT = 4.2V; f = 2.441GHz; T=20°C
RF Characteristics
Receiver
Sensitivity at 0.1% BER
Maximum Receiver Signal
C/I Co-Channel
Adjacent Channel Selectivity C/I -1MHz
2nd Adjacent Channel Selectivity C/I -2MHz
3rd Adjacent Channel Selectivity C/I -3MHz
Image Rejection C/I
Units
dBm
dBm
dB
dB
dB
dB
dB
Min
-20
Typ
-90
-10
-6
-38
-45
-16
Max
-86
11
-30
-40
-9
Bluetooth Spec
≤-70
≥ -20
≤11
≤0
≤-30
≤-40
≤-9
Units
dBm
dB
dB
KHz
dBm
dBm
Min
16
Typ
24
0.5
940
-36
-45
Max
1000
-20
-40
Bluetooth Spec
-6 to +4
> 16
<1000
≤-20
≤-40
VBAT = 4.2V; f = 2.4441GHz; T=20°C
Transmitter
RF Output Power
RF Power Control Range
RF Power Range Control Resolution
20dB Bandwidth for Modulated Carrier
2nd Adjacent Channel Power (+/- 2MHz)
3rd Adjacent Channel Power (+/- 3MHz)
VBAT = 4.2V; f = 2.4441GHz; T=20°C
All specifications including pinouts and electrical specifications may be changed without prior notice
Spec-BM153-V4.6
Page 2 of 7
www.sunitec-cn.com
®
Product Specification
Pin Configurations
PIN NO.
NAME
AIO1
AIO0
RESET
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
GND
PIO9
PIO10
PIO11
PIO12
PIO13
PIO14
PIO15
GND
VDD
VDD
VDD_USB
+1V8
GND
USB_DP
USB_DN
UART_RTS
UART_CTS
UART_RX
UART_TX
PCM_IN
PCM_SYNC
PCM_CLK
PCM_OUT
SPI_CSB
SPI_MISO
SPI_CLK
SPI_MOSI
VRE_IN
VDD_BAT
TYPE
Bi-directional
Bi-directional
CMOS input with
weak internal pull-up
GND
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
GND
Power
Power
Power
Power
GND
Bi-directional
Bi-directional
CMOS Output
CMOS Input
CMOS Input
CMOS Output
CMOS Input
Bi-directional
Bi-directional
CMOS Output
CMOS Input
CMOS Output
CMOS Input
CMOS Input
Analogue
Battery terminal +ve
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
GND
VDD_CHG
LED1
LED0
GND
SPK_L_N
SPK_L_P
SPK_R_N
SPK_R_P
GND_S
MIC_BIAS
MIC_B_P
MIC_B_N
MIC_A_P
MIC_A_N
GND
PIO0
PIO1
PIO2
PIO3
PIO4
PIO5
PIO6
PIO7
PIO8
GND
RF-IN
GND
GND
Charger input
Open drain output
Open drain output
GND
Analogue
Analogue
Analogue
Analogue
GND_S
Analogue
Analogue
Analogue
Analogue
Analogue
GND
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
GND
RF
GND
Spec-BM153-V4.6
FUNCTION
Programmable input/output line
Programmable input/output line
Reset if low. Input debounced so must be low for >5ms to
cause a reset
Ground
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Ground
+3.3V Supply
Connect to +1V8
Positive supply for UART/USB ports, Connect to VDD
+1.8V Supply
Ground
USB Data Plus
USB Data Minus
UART Request To Send (Active Low)
UART Clear To Send (Active Low)
UART Data Input (Active High)
UART Data Output (Active High)
Synchronous Data Input
Synchronous Data Sync
Synchronous Data Clock
Synchronous Data Output
Chip Select For Synchronous Serial Interface (Active Low)
Serial Peripheral Interface Data Output
Serial Peripheral Interface Clock
Serial Peripheral Interface Data Input
Take high to enable switch-mode regulator
Lithium ion/polymer battery positive terminal. Battery
charger output and input to switch-mode regulator
Ground
Lithium ion/polymer battery charger input
LED Driver
LED Driver
Ground
Speaker output negative, left
Speaker output positive, left
Speaker output negative, right
Speaker output positive, right
Anlogue Signal Ground
Microphone bias
Microphone input positive, right
Microphone input negative, right
Microphone input positive, left
Microphone input negative, left
Ground
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Programmable Input/Output Line
Ground
RF Interface
Ground
Page 3 of 7
RE-MARK
For 3.3V Version
For 1.8V Version
www.sunitec-cn.com
®
Product Specification
Recommended Layout patterns:
Spec-BM153-V4.6
Page 4 of 7
www.sunitec-cn.com
®
Product Specification
Recommended Reflow Temperature Profile:
Key features of the profile:
-Initial Ramp=1-2.5℃/sec to 175℃ equilibrium
-Equilibrium time=60 to 80 seconds
-Ramp to Maximum temperature (250℃)=3℃/sec Max
-Time above liquidus temperature(217℃): 45 - 90 seconds
-Device absolute maximum reflow temperature: 250℃
MAC Address:
Each Module has his MAC Address
001D DF XXXXXX
Concerning the dimension of the tab,only printing the last six letters of the LAP on the module.
13.0 mm
5.0 mm
xxxxxx
The tab code pastes style:
Spec-BM153-V4.6
Page 5 of 7
www.sunitec-cn.com
®
Product Specification
QDL Certificate
Spec-BM153-V4.6
Page 6 of 7
www.sunitec-cn.com
®
Product Specification
Ordering Information
No
Items
Ordering Code (Class 2)
BC05mm-ext Module-3V3
BM153
BC05mm-ext Module-3V3
BM153-08
BC05mm-ext Module-3V3
BM153-32
BC05mm-ext Module Test Kit
BM153 TK
Description
16Mbit Flash Operating Voltage is 3.3V
8Mbit Flash Operating Voltage is 3.3V
32Mbit Flash Operating Voltage is 3.3V
Test kit base BM153
Document References
References
Version
Specifications of the Bluetooth System
BlueCore5-Multimedia External Product Data Sheet
V2.1+EDR, 26 July 2007
CS-121064-DSP2 15 July 2008
Document History
Revision
Date
Draft V0.1
V1.0
V2.0
V3.0
V4.0
V4.1
V4.2
V4.3
V4.4
V4.5
V4.6
2006-12-12
2007-04-12
2008-09-11
2008-09-19
2009-05-22
2009-07-30
2009-08-22
2009-12-02
2011-7-1
2011-12-19
2013-01-10
History
First release
Update from Revision V1.0
Update from Revision V2.0
Update from V2.0+EDR compliant to V2.1+EDR compliant
Update from printing MAC address “UAP” to “LAP”
Remove BC57E687B-ITB-E4 from BOM
Modify page 3 PIN OUT mistake (Swap AIO0 and AIO1)
Add more order information
Add more order information BM153-32
Add BM153 Test board
Contact Information
Sunitec Enterprise Co., Ltd.
Head Office:
3F.,No.98-1,Mincyuan Rd Sindian City, Taipei
County 231,Taiwan
Tel: 886-2-82191696
Fax: 886-2-82191676
http://www.sunitec.com.tw
Spec-BM153-V4.6
China Factory:
No.2,Qilin Road 2,Run Tang Ind., Dan-Keng Village Fu
Ming Community, Guan-lan Town, BaoAn District,
Shenzhen GuangDong China
Tel: 86-755-29802983
Fax: 86-755-29802984
E-mail: sales@sunitec-cn.com or project@sunitec-cn.com
Http://www.sunitec-cn.com
Page 7 of 7
www.sunitec-cn.com
SRS‐X3
Construction of RF wireless part and Stability of power supply
Construction of wireless part
1、 The BT model BM153 has 60 pin.
2、 Every pin is fixed on main board by tin.
3、 The pad of every pin is about 1.176x0.7mm in main board
4、 The distanc of every pin is only 1.016mm in main board;
5、How the BT model is fixed on main board as the following photo
RF Part
Main Board
Internal Photo
Sony Corporation
Personal Audio System
[Model : SRS-X3]
Internal Photo
Sony Corporation
Personal Audio System
[Model : SRS-X3]
Bluetooth
Module
Internal Photo
Sony Corporation
Personal Audio System
[Model : SRS-X3]
Antenna
Internal Photo
Sony Corporation
Personal Audio System
[Model : SRS-X3]
BT
Internal Photo
Sony Corporation
Personal Audio System
[Model : SRS-X3]
External Photo
Sony Corporation
Personal Audio System
[Model : SRS-X3]
Front View
Back View
Top View
External Photo
Sony Corporation
Personal Audio System
[Model : SRS-X3]
Bottom View
Side View
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The end host device should bear the label which indicate "Contains FCC ID:AK8BM153" or
"Contains IC:409B-BM153".

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Administrator
Create Date                     : 2013:08:29 22:48:18+08:00
Modify Date                     : 2014:03:25 15:52:34+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2014:03:25 15:52:34+08:00
Format                          : application/pdf
Title                           : Microsoft Word - SPEC-BM153-V4.6 10012013.doc
Creator                         : Administrator
Document ID                     : uuid:99d1f2e8-6c48-475b-b8ae-81d702f7cd37
Instance ID                     : uuid:5be99328-da12-40eb-9926-4e2dffa4448c
Page Count                      : 16
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AK8BM153

Navigation menu