Sony Group DTPH1500AB Testing Tool User Manual DTP H2500A DTP L2500A

Sony Corporation Testing Tool DTP H2500A DTP L2500A

Manual

Download: Sony Group DTPH1500AB Testing Tool User Manual DTP H2500A DTP L2500A
Mirror Download [FCC.gov]Sony Group DTPH1500AB Testing Tool User Manual DTP H2500A DTP L2500A
Document ID1019457
Application ID2k/cPvan802MaJdmOAnf8Q==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize28.87kB (360862 bits)
Date Submitted2008-10-22 00:00:00
Date Available2008-12-06 00:00:00
Creation Date2008-09-30 13:13:57
Producing SoftwareAcrobat Distiller 5.0.5 for Macintosh
Document Lastmod2008-10-08 15:48:10
Document TitleDTP-H2500A/DTP-L2500A
Document CreatorPageMaker 6.5J
Document Author: Sony Computer Entertainment Inc.

Testing Tool
Instruction manual
SCE CONFIDENTIAL
This manual contains safety precautions for the prevention of accidents,
and instructions for the use and handling of this product.
Read this manual carefully and use the product in a safe manner. After
reading the manual, store it in an accessible location for future reference.
DTP-H2500A
DTP-L2500A
4-121-353-11(1)
DTP-H2500A DTP-L2500A
4-121-353-11(1)
WARNING
For customers in the U.S.A.
WARNING
NOTE:
To avoid electrical shock, do not
open the cabinet. Refer servicing to
qualified personnel only.
Use the supplied AC adaptor only. If
you use other types, it may cause fire,
electrical shocks or a malfunction.
Laser specifications
UMDTM
Wave length:
Power:
Type:
DVD-ROM
Wave length:
Power:
Type:
655-665 nm
max 0.28 mW
Semiconductor, continuous
640-660 nm (DVD)
775-805 nm (CD)
max 0.3 mW (DVD)
0.23 mW (CD)
Semiconductor, continuous
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
The use of optical instruments with this product will
increase eye hazard. As the laser beams used in the DVDROM and UMD™ drives are harmful to eyes, do not
attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial enviroment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
For customers in the U.S.A. and Canada
This Class A digital apparatus complies with Canadian
ICES-003.
This device complies with Part 15 of the FCC Rules and
RSS-Gen of IC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation of this device.
This equipment complies with FCC/IC radiation exposure
limits set forth for uncontrolled equipment and meets the
FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment should be
installed and operated with at least 20 cm (8 in) and more
between the radiator and person's body (excluding
extremities: hands, wrists, feet and legs).
This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
Pour les utilisateurs aux États-Unis et
au Canada
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
This label is located on the DVD-ROM laser protective
housing inside the enclosure.
CLASS 1 LASER PRODUCT
LASER KLASE 1
LUOKAN 1 LASER LAITE
KLASS 1 LASERAPPARAT
This appliance is classified as a CLASS 1 LASER product
under IEC60825-1: 2001. The CLASS 1 LASER product
marking is located on the side of the product.
Cet appareil est conforme aux stipulations de l'article 15 des
règlements de la FCC et RSS-Gen des règles IC. Son
opération est sous réserve des deux conditions suivantes :
(1) cet appareil ne peut pas causer de brouillage
préjudiciable et (2) cet appareil doit accepter le brouillage
préjudiciable reçu, y compris un brouillage qui pourrait
causer son fonctionnement irrégulier.
Cet équipement est conforme aux limites d'exposition aux
radiofréquences IC établies pour un environnement non
contrôlé et se conforme aux exigences de conformité pour
l'exposition aux RF IC, dans le supplément C à OET65 et
RSS-102. Cet équipement doit être installé et opéré à au
moins 20 cm (8 po.) d'écart entre le radiateur et la personne
physique (extrémités du corps non prises en compte :
mains, poignets, pieds et jambes).
Ce transmetteur ne doit pas être utilisé conjointement ou
placé avec tout autre transmetteur ou antenne.
WARNING
DTP-H2500A DTP-L2500A
4-121-353-11(1)
Important safeguards
For your protection, please read these
safety instructions completely before
operating the appliance, and keep this
manual for future reference.
Water and moisture
Carefully observe all warnings,
precautions and instructions on the
appliance, or those described in the
instruction manual and adhere to them.
Do not use the powerline operated unit near water –
for example, near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement or near a
swimming pool, etc.
INSTALLATION
Power cord protection
USE
Route the power cord so that it is not likely to be
walked on or pinched by items placed upon or
against it, paying particular attention to the plugs,
receptacles, and the point where the cord exits from
the unit.
Power sources
This unit should be operated only from the type of
power source indicated on the marking label. If you
are not sure of the type of electrical power supplied
to your home, consult your dealer or local power
company. For those units designed to operate from
battery power, or other sources, refer to the
operating instructions.
Ventilation
The slots and openings in the cabinet are provided
for necessary ventilation. To ensure reliable
operation of the unit, and to protect it from
overheating, these slots and openings must never be
blocked or covered.
– Never cover the slots and openings with a
cloth or other materials.
– Never block the slots and openings by placing
the unit on a bed, sofa, rug or other similar
surface.
Overloading
Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity,
since this can result in fire or electric shock.
Liquid and foreign objects
Never push objects of any kind into the unit through
openings as they may touch dangerous voltage
points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the
unit.
Attachments
Use only attachments recommended by the
manufacturer. Other attachments may cause
hazards.
Accessories
Do not place the unit on an unstable cart, stand,
bracket or table. The unit may fall, causing serious
injury to a child or an adult, and serious damage to
the unit.
Use only a cart, stand, tripod, bracket, or table
recommended by the manufacturer.
An appliance and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
Cleaning
Unplug the unit from the wall outlet before cleaning
or polishing it. Do not use liquid cleaners or aerosol
cleaners. Use a cloth lightly dampened with water
for cleaning the unit exterior.
– Never place the unit in a confined space, such
as a bookcase, or built-in cabinet, unless
proper ventilation is provided.
– Do not place the unit near or over a radiator or
heat register, or where it is exposed to direct
sunlight.
Important safeguards
DTP-H2500A DTP-L2500A
4-121-353-11(1)
Important safeguards
SERVICE
Damage requiring service
Unplug the unit from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
– When the power cord or plug is damaged or
frayed.
– If liquid has been spilled or objects have fallen
onto the unit.
– If the unit has been exposed to rain or water.
– If the unit has been subjected to strong
physical shock by being dropped, or the
cabinet has been damaged.
– If the unit does not operate normally when
following the instruction manual. Adjust only
those controls that are specified in the
instruction manual. Improper adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the unit to normal
operation.
– When the unit exhibits a distinct change in
performance – this indicates a need for service.
Servicing
Do not attempt to service the unit yourself as
opening or removing the exterior casing may expose
you to dangerous voltage or other hazards.
Refer all servicing to an authorized service center.
Refer to the contact information on the back cover
to receive instructions on obtaining repair/
replacement services.
Replacement parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original parts.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
Safety check
Upon completion of any service or repairs to the
unit, ask the service technician to perform routine
safety checks (as specified by the manufacturer) to
determine that the unit is in safe operating
condition.
Important safeguards
DTP-H2500A DTP-L2500A
4-121-353-11(1)
Precautions
Safety
This product has been designed with the highest concern for safety. However, any electrical device, if
used improperly, has the potential for causing fire, electrical shock or personal injury. To help ensure
accident-free operation, follow these guidelines.
• Observe all warnings, precautions and instructions.
• Stop use and unplug the AC power cord from the electrical outlet if the unit functions in an abnormal
manner, or produces unusual sounds or smells.
• Call the number listed on the back cover for technical assistance if the device does not operate
properly.
• Do not remove the unit’s exterior or disassemble the unit. The laser beam emitted from the lens of this
unit may be harmful to the eyes.
• Do not use the unit near water.
• Stop using the unit immediately if you experience any of the following symptoms. If the condition
persists, consult a doctor.
– Lightheadedness, nausea or a sensation similar to motion sickness
– Tired, uncomfortable or aching hands or arms
– Tired, dry or aching eyes
• Avoid looking at the screen for prolonged periods of time.
• Listening to sound continuously for a long time with a high volume may adversely affect the ears. Be
careful, especially when using headphones. Adjust the volume so that surrounding sounds can be
heard.
• Do not close the disc tray or disc cover in a way that could pinch your hand or fingers, as personal
injury or damage to the unit could result.
• The socket outlet shall be installed near the equipment and shall be easily accessible.
• Only trained professionals should attempt electrical socket-outlet installation.
Use and handling
• Do not use the unit or accessories outdoors.
• Do not throw or drop the unit or accessories, or expose the devices to strong physical shock. Handle
the analog stick with care.
• Do not forcibly twist the controller or expose it to strong physical shock, as doing so can cause
damage.
• Do not place the unit or accessories on surfaces that are unstable, tilted or subject to vibration.
• Do not expose the unit or accessories to high temperatures, high humidity or direct sunlight.
• Do not block the vents.
• Do not wrap the unit or accessories in cloth or similar materials.
• Do not allow dust to build up on the unit.
• Do not place the unit in locations of poor ventilation, such as small, enclosed areas, directly against a
wall or on a thick carpet or bedding.
• Do not expose the unit to dust, smoke or steam.
• Do not allow liquid or small particles to get into the unit.
• Do not put heavy objects on the unit.
• Do not place anything in front of the disc tray.
• Do not use damaged, reshaped or repaired discs.
• Do not touch or insert foreign objects into the connectors of the unit or accessories.
• Do not insert cords and cables at an angle. Doing so may damage the connector pins or create the risk
of fire.
• Do not set the unit other than in the vertical position.
• If a spring or screw is provided to secure a cable connector, use the provided spring or screw to secure
it. Take care to prevent making faulty connections.
Precautions
DTP-H2500A DTP-L2500A
4-121-353-11(1)
Precautions
AC adaptor and AC power cord use
• To help ensure safe operation, during initial setup and regularly thereafter, inspect the AC adaptor and
AC power cord. If damaged, stop use immediately and call the number on the back cover for assistance.
• Do not use AC adaptors or AC power cords other than those provided or designated in the instruction
manual. If the provided or designated AC adaptor or power cord is not used, electrical shock may
result or the unit may not operate.
• Do not modify or damage the AC power cord.
• Do not place the AC adaptor between the unit and a wall or shelf.
• Do not place heavy objects on the AC power cord.
• Check that there is no dust or lint on the power plug before inserting into an electrical outlet. If the
plug becomes dirty, wipe it off with a dry cloth before connecting.
• When inserting the AC power cord into an electrical outlet, insert the plug straight into the electrical
outlet and not at an angle.
• Unplug the AC power cord from the electrical outlet before cleaning or moving the unit, or when you
do not intend to use the unit for an extended period of time. When disconnecting, grasp the power cord
by the plug and pull it straight out of the electrical socket. Never pull by the cord and do not pull out at
an angle.
• Do not touch the plug of the AC power cord with wet hands.
• Do not touch the power plug during an electrical storm.
• Do not touch the unit or AC adaptor for extended periods of time while the unit is turned on, as
extended contact may cause low-temperature burns.
Cleaning
• For safety reasons, before cleaning the unit or connected accessories, 1) turn off the unit, 2) disconnect
the power plug for the unit from the electrical outlet.
Moisture condensation
• If the unit or disc is brought directly from a cold location to a warm one, moisture may condense on
the lens inside the unit or on the disc. Should this occur, the unit may not operate properly. In this case,
remove the disc and then turn off and unplug the unit. Do not put the disc back in until the moisture
evaporates (this may take several hours). If the unit still does not operate properly, obtain technical
assistance using the contact information on the back cover.
Photosensitivity
• A very small percentage of individuals may experience epileptic seizures when exposed to certain light
patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or while
playing video games, including games played on the unit, may trigger an epileptic seizure in these
individuals. Certain conditions may trigger previously undetected epileptic symptoms even in persons
who have no history of prior seizures or epilepsy. If you, or anyone in your family, has an epileptic
condition, consult your physician prior to playing. If you experience any of the following symptoms
while playing a video game - dizziness, altered vision, eye or muscle twitches, loss of awareness,
disorientation, any involuntary movement or convulsions - IMMEDIATELY discontinue use and
consult your physician before resuming play.
Radio waves
• Radio waves may affect electronic equipment or medical devices (for example, pacemakers), which
may cause malfunctions and possible injuries.
- If you use a pacemaker or other medical device, consult your physician or the manufacturer of your
medical device before using the wireless networking feature.
- Keep the unit at least 9 inches (23 cm) away from a pacemaker or other medical devices when using
the wireless networking feature.
Precautions
DTP-H2500A DTP-L2500A
4-121-353-11(1)
About this product
This unit is equipped with features for the verification of PSPTM software.
• PSPTM features are provided for efficient software verification.
• Two types of drives are built in: a UMDTM drive, and a DVD-ROM drive, which is used during
development. A switch is used to select the desired drive.
For details, contact technical support using the contact information on the back cover.
About this product
DTP-H2500A DTP-L2500A
4-121-353-11(1)
Part names and usage
Unit front
UMD
DRIVE SELECT
DVD
POWER
F1
q;
F2
CONTROLLER
qa
GPO
qd
qs
qf
GPI
ON OFF
qg
qh
1 On/standby button, power
indicator
This button turns the unit on and off.
To turn on the unit, press the on/standby button
while it is in standby mode. The indicator then
turns solid green when the system is ready. The
unit status can be determined by the color of the
power indicator.
Solid green
The system is starting up
(the unit can now be used)
Solid orange
Standby mode
2 Disc cover
The open button (3) is used to open the cover
so that a UMDTM can be inserted. When closing,
press the middle of the upper edge of the disc
cover.
3 Open button
This button is used to open the disc cover (2).
4 Memory Stick DuoTM access
indicator
Turns orange while the unit is accessing a
Memory Stick DuoTM or Memory Stick PRO
DuoTM that has been inserted into the unit.
5 Memory Stick DuoTM slot
This slot accepts Memory Stick DuoTM or
Memory Stick PRO DuoTM media.
6 USB connector
For connecting USB connectors (mini-B type).
When the included controller is connected to the
USB connector, the controller’s USB connector
becomes functional.
7 Drive select button
Switches between the UMDTM drive and the
DVD-ROM drive.
The selected drive is identified by the UMDTM/
DVD-ROM drive indicators (8). The drive
select button (7) can be used only when the
power indicator of the controller is not lit.
8 UMDTM/DVD-ROM drive indicator
The indicator for the drive, UMDTM or DVDROM, turns orange to indicate which drive is
selected.
9 Open/close button
This button is used to open/close the DVD-ROM
drive.
q; F1 button
This button will be used for future function
upgrades.
For use by service personnel only.
qa F2 button
This button will be used for future function
upgrades.
For use by service personnel only.
qs DVD-ROM drive
This drive accepts DVD-ROM discs. Use the
open/close button (9) to insert and remove
discs.
Part names and usage
DTP-H2500A DTP-L2500A
4-121-353-11(1)
Part names and usage
qd Controller port
Connects with the commander interface
connector of the attached controller.
qg Headset connector
The PSP-1000 series headphones with remote
control or a commercially sold headset (with a
stereo mini-plug) can be connected here.
qf GPO indicator
These are eight indicators that are user-definable
by PSPTM software developers.
qh GPI switch
These are eight dip switches that are userdefinable by PSPTM software developers.
Unit rear
3 Dedicated connector for servicing
For use by service personnel only.
Caution
Usage of this port may cause irreparable damage to the
system.
EXT
4 VGA connector
Connects to a device with a VGA IN connector.
RF (EXT)
5 AUDIO OUT connector
Connects to a device with an AUDIO IN
connector.
6 Vent fan
Vent for internal fan used to cool unit. Be sure
not to obstruct this vent, as doing so may cause a
fire. Also, to prevent any hindrance to air flow,
position the unit an adequate distance from walls.
DC IN
19.5V
AUDIO OUT
1 Aerial
For wireless LAN use.
2 Extension connector
For use by service personnel only.
7 RF (extension) connector
Connects to an access point using a coaxial cable.
8 Clamp
For securing the aerial and
AC adaptor to the unit.
9 DC IN 19.5V connector
For attaching the included AC adaptor.
Part names and usage
DTP-H2500A DTP-L2500A
4-121-353-11(1)
Part names and usage
Controller front
qs
qd
q;
qa
VOL
qf qg qh
SELECT
START
qjqkqlw;
1 LCD screen
qa Strap holder
2 L button
qs Left speaker
3 R button
qd Right speaker
4 Up, down, left, right buttons
qf PS button
5 △, ○, ×, □ buttons
qg Volume - button
6 Power indicator
qh Volume + button
7 Hold indicator
qj Display button
8 Memory Stick DuoTM access
indicator
qk Sound button
9 WLAN access indicator
ql Select button
w; Start button
q; Analog stick
Caution
• Do not cover or insert foreign objects into the speakers as doing so may result in damage to the controller.
• The microphone feature is not implemented.
10
Part names and usage
DTP-H2500A DTP-L2500A
4-121-353-11(1)
Part names and usage
Controller top
WLAN
1 WLAN switch
2 USB connector
Controller right
1 Power/hold switch
Caution
Before turning off the unit, check that the controller is not in hold mode. If the unit is turned off with the power/hold switch of the
controller in the hold position, the unit will not turn off properly. If this happens, disconnect the AC power cord from the electrical
socket to turn off the power.
Part names and usage
DTP-H2500A DTP-L2500A
11
4-121-353-11(1)
How to use
How to connect
Connect the unit and controller as shown in the illustration below.
UMD
Power indicator on the unit
DRIVE SELECT
Power indicator on the controller
DVD
POWER
F1
F2
CONTROLLER
To USB connector
GPO
VOL
SELECT
START
To controller port
GPI
ON OFF
Caution
• When you connect or disconnect the controller, turn off power to the unit (keep it in standby mode). If the power is left on, it
may result in damage to the unit or the controller.
• When turning on the unit, be sure to use the supplied AC adaptor.
Turning on the unit
Connect the AC power cord to the AC adaptor, and connect the AC adaptor to the
rear of the unit.
Insert the power plug into an electrical outlet.
The power indicator on the unit turns orange, and the unit enters standby mode.
Press the on/standby button on the unit.
The power indicator on the unit turns green.
Press the drive select button on the unit, and select which drive to use.
The selected drive’s indicator turns orange.
Slide the power/hold switch on the controller to the up position.
The power indicator on the controller turns green, and the menu screen is displayed within seconds.
12
How to use
DTP-H2500A DTP-L2500A
4-121-353-11(1)
How to use
Turning off the unit
Press the on/standby button on the unit and hold it down for longer than three
seconds.
The power indicator on the unit will flash and then turn orange (and the system will enter standby
mode).
Remove the power plug from the electrical outlet.
Switch between the UMDTM drive and the DVD-ROM drive
Confirm that the power indicator on the controller is off.
If the power indicator turns on, slide the power/hold switch to the up position for longer than five
seconds to turn the controller off.
Press the drive select button on the unit, and select which drive to use.
The selected drive’s indicator turns orange.
Slide the power/hold switch on the controller to the up position.
The power indicator on the controller turns green, and the menu screen is displayed within seconds.
About radio frequency interference when using wireless LAN
Aerial
Separate by 80 cm
(31 in) or more
Controller
VOL
SELECT
START
UMD
DRIVE SELECT
DVD
POWER
SYSTEM INIT
NETWORK INIT
CONTROLLER
GPO
GPI
ON OFF
When using the wireless LAN function, separate the unit’s aerial and the controller by at least 80
centimeters (31 inches). Alternatively, you can use the Network Kit (DTP-H120) (sold separately).
If the unit is used with the controller and aerial in close proximity to each other, radio frequency
interference from the controller will interfere with the wireless LAN signal and can cause an increase in
loss of data packets.
How to use
DTP-H2500A DTP-L2500A
13
4-121-353-11(1)
Specifications
Main unit (DTP-H1500A B /
DTP-L1500A B)
Compatible discs
CD-ROM / CD-R / DVD-ROM / DVD-R /
UMDTM
Power
Input voltage
DC IN 19.5V
Power consumption
5A
Operating environment
Operating temperature 10°C - 35°C
Operating humidity
30% - 70%
(not condensed)
Dimensions (excluding protrusions)
100 x 280 x 298 mm
Weight
5.0 kg or less
Processor
Dedicated processor (max 333 MHz)
External interfaces
USB connector x 1
Memory Stick DuoTM slot x 1
Controller connector x 1
Headset connector x 1
RF (extension) connector x 1
Aerial x 1
(For wireless LAN IEEE 802.11b)
VGA connector x 1
(Analog RGB, D-SUB, 15-pin)
AUDIO OUT (audio output) connector x 1
(RCA pin)
Dedicated connector for servicing x 1
(For use by service personnel only.)
Extension connector x 1
(Devices other than those designated
cannot be used.)
Wireless LAN channels
USA and Canada
Europe
1-11 ch.
1-11 ch.
Controller (DTP-H200)
Dimensions (excluding protrusions)
170 x 72 x 19 mm (w/h/d)
Weight (including the cable)
Approx. 370 g
AC adaptor (DTP-H100)
Power
Input voltage AC
Output voltage DC
Rated frequency
Power consumption
100 - 240V (±10%)
19.5 V
50/60Hz (±2%)
1.6A (100V), 0.7A
(240V)
External dimensions
160 x 38 x 80 mm
(w/h/d)
Weight
Approx. 570 g
Supplied accessories
Instruction manual x 1
AC power cord for use in Oceania x 1
AC power cord for use in Europe x 1
AC power cord for use in Korea x 1
AC power cord for use in the UK x 1
AC power cord for use in the USA and
Canada x 1
AC adaptor x 1
Controller x 1
(With controller-interface cable [1.5 m])
Design and specifications are subject to
change without notice.
Software
Software developed by the NetBSD Foundation,
Inc. and its contributors is used for the
communication functions of this product. For more
information, see
http://www.scei.co.jp/psp-license/pspnet.txt
This product adopts S3TC texture compression
technology under license from S3 Graphics, Co.,
Ltd.
This product includes RSA BSAFE Cryptographic
software from RSA Security Inc. RSA is a
registered trademark of RSA Security Inc. BSAFE
is a registered trademark of RSA Security Inc. in the
United States and/or other countries.
U.S. and foreign patents licensed from Dolby
Laboratories.
A portion of the PSPTM system software requires the
following copyright notice:
This software is based in part on the work of the
Independent JPEG Group.
14
Specifications
Inst B5 Ver.4.0
DTP-H2500A DTP-L2500A
4-121-353-11(1)
Limitations of liability
This product is supplied pursuant to and subject to the terms of the agreement with regard to the use
and/or supply of tools including, but not limited to, any tool loan agreement, tool purchase and license
agreement, and/or development agreement, with Sony Computer Entertainment Inc. or its affiliates.
Other than as expressly set forth by SCEI and/or any of its affiliates, except to the extent prohibited by
applicable laws, SCEI and/or any of its affiliates shall not be liable for any damages, including special,
incidental or consequential damages, or fees arising out of the use or inability to use this product.
Limitations of liability
15
Inst B5 Ver.4.0
DTP-H2500A DTP-L2500A
4-121-353-11(1)
This product may fall within the scope of national export control legislation.
You must comply fully with the requirements of such legislation and of all other applicable laws of any
jurisdiction in relation to this product.
Contact information:
Korea
Developer Support
Sony Computer Entertainment Korea Inc.
14Fl. Koosan Tower, 3250, Bangbae2-Dong
Seocho-Gu, Seoul, #137-853 Korea
E-mail: psp_support@scek.co.kr
TEL: +82-2-6230-3596 (direct)
United Kingdom (Europe)
SCEE R&D
Sony Computer Entertainment Europe
13 Great Marlborugh Street
London W1F 7HP UK
TEL: +44-207859-5559 (direct)
http://www.scee.sony.co.uk
USA
Developer Support
Sony Computer Entertainment America
919 East Hillsdale Boulevard
Foster City, CA 94404-2175 USA
TEL: +1-650-655-5566 (direct)
FAX: +1-650-655-5511 (direct)
Without obtaining the consent of the owner, no part of the content of this document may be copied, pursuant
to the provisions of the Copyright Act.
“
” is a registered trademark and “
Entertainment Inc.
” and “UMD” are trademarks of Sony Computer
“SONY” and “ ” are registered trademarks and “Memory Stick Duo”, “Memory Stick PRO Duo” and “
are trademarks of Sony Corporation.
© 2008 Sony Computer Entertainment Inc. All rights reserved.
DTP-H2500A DTP-L2500A
”
Printed in Japan
4-121-353-11(1)

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 5.0.5 for Macintosh
Create Date                     : 2008:09:30 13:13:57+09:00
Modify Date                     : 2008:10:08 15:48:10+09:00
Metadata Date                   : 2008:10:08 15:48:10+09:00
Creator Tool                    : PageMaker 6.5J
Format                          : application/pdf
Creator                         : Sony Computer Entertainment Inc.
Title                           : DTP-H2500A/DTP-L2500A
Document ID                     : uuid:c477c1a0-db98-4099-8850-23c2d72a78e2
Instance ID                     : uuid:a7fa4658-b492-4f46-b0ba-9fafc97258ee
Page Count                      : 16
Author                          : Sony Computer Entertainment Inc.
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AK8DTPH1500AB

Navigation menu