Sony Group RCS620S Contactless IC Card Reader/Writer User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	2205187
Application ID	Gwt7PAn0Bq/6blGd8smEKA==
Document Description	User Manual_1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	343.99kB (4299854 bits)
Date Submitted	2014-03-04 00:00:00
Date Available	2014-03-04 00:00:00
Creation Date	2014-02-27 20:42:33
Producing Software	DocuCentre-III C4405
Document Lastmod	2014-02-27 20:43:09
Document Title	User Manual_1
Document Creator	DocuCentre-III C4405

SONY;
Fenca
ReaderNVriter Module
RC-SGZO/S
Product Specifications
Version 1.1
No. Mxxx-Exx-xx
Resezms Product Specifications F E I i I: 3
Introduction
This document describes the major features and specifications of ReaderNVriter module of Sony, RCrSGZO/S.
For the purpose of this document, the terms below denote the products or eqmpment described to the right.
Card A contactless lC card.
ReaderNVriter 1 A device used to read and write contactless 10 cards. tags and deVIces.
Controller : An external computer or an equivalent device that is directly connected to a
Reader/Writer via a specific cable.
User applications can use some libraries including FeliCa libraries to access RC-SGZO/S. API specifications
for these libraries vary depending on the products used, as well as the intended usage of the system, making
it necessary to see the appropriate document for each.
Model name Description Usage Reference document
RC-SGZD/S UART for controller For embedded device “SDK for NFC Reference Implementation
interfacing Basic Suite for RGSBSB API Specifications"
NOTE1 A driver for embedded devices. as well as Fel'iCa libraries, must be developed by yourself, For
this purpose, the “SDK for NFC Reference implementation Basic Suite for RC-SQSG” is optionally available.
NOTEZ For beginning the services using specific card brands, it is necessary to obtain permission from
companies which hold the right to use by yourself
NOTE3 Please note that Business Opportunity Loss by failure or other causes cannot becompensated
irrespective of the warranty period. The prior check of operation in your system is strongly recommended
- FeliCa is a contactless IC card technology developed by Sony Corporation.
- FeliCa is a trademark of Sony Corporation.
a All names of companies and products contained herein are trademarks or reglstered trademarks of the
respective companies.
- No part of this document may be copied. or reproduced in any form, without the prior consent of Sony
Corporation.
. Information in this document is subject to change Without notice.
- Sony Corporation assumes no liability for damages arising from, or in connection with, the use of this
document.
Page 3
RC-SeZD/S Product Specifications F E I i c a
Safety Information and Caution
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
Modsl:RC'S620/S Dc:3.3l5V .—. 4-537-570-01
cAN ICES-3 mun-a a ustP-cnI—sux-nc-sezos
Fcc immacsezos
ic:4o9a—ncsszos & C e [E
«((xxxxxxxxxxxxxx xxxxxxx
Sony Corporatlon Made In Japan I Fabrlqué an Japan
Cements of spec indication label
For the customers in USA
This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: (1)
This devrce may not cause harmful interference, and (2) this device must accept any interference received.
including interference that may cause undesired operation.
WARNING
You are cautioned that any changes or modifications not expressly approved in this manual could void your
authority to operate this equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device.
pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against
harmful interference in a residential installation This equipment generates, uses. and can radiate radio
frequency energy and, it not installed and used In accordance with the instructions, may cause harmful
interference to radio communications. However. there is no guarantee that interference Will not occur in a
particular installation. if this equipment does cause harmlul interference to radio or television reception. which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
-Reorient or relocate the receiving antenna.
-lncrease the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
~Consult the dealer or an experienced radio/TV technician for help.
Page 4
RC-SSZO/S Product Specifications F e I i E a
For the customers in Canada
This Class B digital apparatus complies with Canadian ICES—003
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference and (2) this device must accept any
Interference. including interference that may cause undesired operation of the device.
The term “‘ICI" before the radio certification number only signifies that Industry Canada technical specifications
were met.
Pour les clients au Canada
Get appareil numerique de la ciasse E est conforme a la norme NMB~003 du Canada
Le present appareil est conforme aux CNR d‘lndustrie Canada applicables aux appareils radio exempts de
licence. L’utilisation dOit repondre aux deux conditions suivantes: (1) ca rnate'riei ne doit pas provoquer de
brouillage et (2) ii doit accepter tout brouiilage, meme celui qui est susceptible d‘affecter son fonctionnement.
La mention « iC: >> devant le numero de certification/ homologation signifie uniquement que les specifications
techniques d’lndustrie Canada sont rempiies,
For the customers in Europe
Hereby. Sony Corporation, declares that this RC-SBZO/S is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
For details, please access the following URL‘
http://wwwcornpliance.sony.de/
CE
For use in following areas: residential, commercial and light industrial,
This product has been tested and found compliant With the limits set out in the EMC Directive for using
connection cables not longer than 3 meters (98 feet).
Emissions from this inductive deVice could cause interference to nearby receivers of other radio services.
The manufacturer of this product is Sony Corporation,
1—7-1 Kcnan, Minato-ku. Tokyo, Japan
The Authorized Representative for EMS and product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 51, 70327 Stuttgart, Germany
Page 5
RC-SGZOIS Product Specwfications F e I i E a
For the customers in Korea
sue} wanna gr % @231 7}%@°] 21%
{1%2‘11 MSIP-CRI-SOK-RC-SG2OS
*éi BEE *évé: iHiflOH—‘a
WWW: RFID/USN% $fl7l7l(13.56MI—Iz U191 M-g 717])
For the customers in Singapore
Cmpllzs mm
For the customers in Taiwan
gi-zfi
E‘Eflifi’ifififiZfiwfifi'fifiifiv itflfifily ’Afil fififififififi‘ifl$1§3§E§£E$§$\ fiflklfl$§2§§l§
if Zfiffitfilflfiéu
% ‘Ifi
ftfifiJ$§fiE€éfiZfifii$¥§§6§fifii§$fi¥i§fiifififi¢ %5§ifi€¥¥§ffi§l% [Sififlfifiiy fitEfi‘EfiEflEiF
éflfiifi, HERE.
fifllfifi’rififé. fifififfiifiiflfi—Zf’fiiZfifiEEEa
ifimifiififififiéfifl§éfiflffifil$~ fiifigfifiififififiifiif¥£éfifi2¥§g
Page 6
Rosezois Product Specifications F E I i I: 3
Contents
1 Key functions and features...
2 Hardware specifications
2.1 Major specifications .
2.1.1 FeliCa communicatio
2.1.2 ISO/IEC 14443 communication.
12
2,2 Interface , 13
2.2.1 Connec or 13
2.2.2 Pin assignmen 13
2.3 UART communication specifications 14
2.4 Electrical speCIfications ..............
2. 4.1 Absolute maximum rating
2.4.2 Electrical characteristics
2.5 Others.
2.6 Reliability spe ications .
2.7 External dimensions ..........
28 Label specifications. .
2.8.1 Position of spec Indication label
2.8.2 Contents of spec indication labe
29 RF performance and the use of magnetic sheet
3 Software specifications.
3.1 Communication packet
3.1.1 Normal frame.
3.1.2 Extended frame.
3.1.3ACK frame ..
3.2 Communication pro oco
3.2.1 Data link level
3.2, 2 Application level.
3 3 Mode transition"...
3.3.1 Concept of operating mode
3.3.2 Overview of individual modes
34 Command list
4 Packing specif
4.1 Packing details ..
4.2 Contents of bar co e a
43 Contents of model label ,
5 Precautions ..........
5.1 Handling precautions.
5.2 Notes on external appe .
Appendix A About installation.
A.’l Installation requirements for RC»SB20/S
A.2 Reduction of the impact of metal....
Appendix B About temperature rise
B1 The verification method and measure
Appendix C About interface cable
C.1 Terminal requirements of FFC/FPC .
Page 7
Rc—sezo/s Product Specificaflons F E l i E a
(Blank page)
Page 5
RCaSBZOIS Product Specifications F E I i I: a
1 Key functions and features
RCASGZOIS (hereinafter called the module) writes and reads data to and from FeIiCarenabled contactless IC
cards It can also write and read data based on the lSO/IEC 14443 communication standards. lmmune to
wear caused by dirt and friction, oonlaotless operation leads to enhanced maintainability. Key functions and
features of the module are detailed below,
0 Based on an inductive read/write system type-certified by the Radio Law of Japan. It is also compliant
With the relevant standards in the United States. Canada, and Europe.
. Compatible With devtces such as mobile phones incorporating a Mobile FeliCa IC chip,
NOTE Not all ufthe processing sequences can be handled.
- Compactly designed with an integral antenna.
- Magnetic and metal sheets are attached to reduce the effects of the installation environment.
- UART serial interface for host controller communication.
. Power supply voltage supports 3.3 V and 5.0 V.
Page 9
RC-SSZO/S Product Specifications
FEIiEB
2 Hardware specifications
This chapter focuses on mayor hardware specifications.
2.1 Major specifications
The following describes the module’s major specifications.
2.1.1 FeliCa communication
. Max communication distance
. Carrier frequency (to)
- Data transfer rate"
. Modulation system
- Bit coding
- Communication system
- Compatible cards“
. Compatible devicesu‘ '5
20 mm or more
(No dead zones of 1 mm or more wide within the above range)

In a free space (temperature: 25°C, humidity: 50%RH) that is
potentially unaffected by nearby radio waves and magnetic sources,
a single RC-SBBO card (operating at its center frequency) is polled
by a standard module. The card is placed so that its center aligns
with the center of the module's antenna along a vertical axis
perpendicular to the antenna surface, With its longitudinal edges
maintained in parallel to those of the antenna. as shown in Figure
2-1.
13 56 MHZ
fc / 64 (212 kbps, approximately). to / 32 (424 kbps, approximately)
Transmission — ASK
Reception — ASK
Transmission — Manchester coding
Reception a Manchester coding
Half-duplex communication, CRC-ITU»T
RIC-8850 Series (RC-5850, RCeS853. RC-8854, RC-SBSS)
ROSBGD Series (ROSBSO. RC-SBBZ, RC»SBG4)
RCrSBBO Series (RC—$888, RC-SBBQ)
FeliCa Lite (RCvSBSG, RC-S710)
Mobile phones incorporating a Mobile FeliCa IC chip (on which the
Mobile FeliCa OS Version 2.0 is running)
(Products based on the 2009/1/15 FeliCa Validation Program)
FeliCa Plug/NFC Dynamic Tag (RC-8801, RC-SSOZ)
Page 10
Rosezws Product Specifications F E | i C B
Ad-hcic communication
0 Data transler rate.8
0 Initiator mode : lo I 64 (212 kbps. approximately). lc / 32 (424 kbps. approximately)
0 Target mode : fc / 64 (212 kbps, approximately)
. Compatible devicesq"a : Mobile phones incorporating a Mobile FeliCa IC chip (on which the
Mobile FellCa OS Version 2.0 is running)
NOTE Feasibility of data exchange and other functions necessary for application execution depends on
the FeliCa Ad-hoc Link Protocol (FALP) on the device used to control the module and mobile phones, as well
as the method of implementing the FALP»compatible application. For more information, please see the
documents that accompany software development kit and lnleIduai applications of Sony (there is no
description about FALP in an English version).
'“5 Available only when the card or the device to be used is also compatible win 424 kbps.
9"” Usable number of cards: One at a time,
”“5"“ Please consult us in advance when using a card or a device otherthan the ones listed above. Such a card or device
may difler in communication distance. making it necessary to verify its performance.
Card's
‘ongimdinW’E
: Card
1 Communication distance
Antenna's ‘
longitudinal direction
em
Antenna of the module
NOTE The relative positions of the card and the antenna are oetenn‘ined first by paralleling their .
longitudinal directions and second, by aligning their centers along an axis that intersects at right angles With
the antenna.
Figure 2-1: Max. communication distance
Page 11
Rc—sezo/s Product Specifications F E I i I: a
2.1.2 ISO/IEC 14443 communication
- Carrier frequency (fc) : 13.56 MHz
- Data transfer rate : tel 123 (106 kbps, approximately)
- Modulation system
0 Type A Transmission — ASK
Reception — ASK
0 Type B i Transmission —ASK
Reception — BPSK
. Bil coding
0 Type A V Transmission — Modified Miller
Reception — Manchester coding with subcarrier
a Type B : Transmissmn — NRZ
Reception — NRZ with subcarrier
a Communication system ’ Half-duplex communication
- Compatible cards.1 : MIFARE Classic, MIFARE Ultralight, MIFARE DESFire,
Topaz/Jewel, Calypso CD Light
(ISO/IEO 14443 Type A, MIFARE and ISO/IEC 14443 Type B
standards are supported)
'1 Please consult us in advance when using a card or a devtce other than the ones listed above Such a card or device
may differ in communication distance, making it necessary to verily its performance
Page 12
Rc-sezo/s Product Specifications F E I i I: a
2.2 Interface
Interfacing between the module and the controller utilizes the connector described below.
2.2.1 Connector
- Model number 08 6223 006 101 868+ made by KYOCERA Connector Products Corporation
Low»profile, 0,5 mm pitch FFC/FPC connector
(Au plated / Single terminal / SMT / Right angle / NON-ZIF I 6 poles)
NOTE1 For the contact point direction, see section 2.7 “External dimensions".
NOTEZ For applicable cable. see section 0.1 “Terminal requirements of PFC/FPO".
NOTES Please consult the manufacturer for detailed specifications,
2.2.2 Pin assignment
Table 2-1: Pin assignment
No. Designation Function Remarks
1 VDD Power supply 003.3 v or Dc5.o v input
2 RXD RXD signal
3 TXD TXD Stgnal
4 GND Ground For grounding
5 Reserve Non Requires OPEN processing by the controller
5 PR5 (GND) Module Fixed at “L" (with GND grounded)
identification signal
NOTE Please confirm the position of mm in external dimensions.
Page 13
RC-SGZO/S Product Spectfications F E I i E a
2.3 UART communication specifications
See the tables below for UART communication specifications
Table 2-2: UART transfer rate
Transfer rate (bps)
9600
19,200
35,400
57 500
115 200 (default)
230,400
460,800
Table 2-3: UART transactions
Item Description
Start bit 1
Data bit 8
Parity None
Stag bit 1
Flow control None
Page 14
RC—S620/S Product Specifications
2.4 Electrical specifications
FEliEa
2.4.1 Absolute maximum rating
Observe the following ranges of operation in order to avoid irreparable damage to the module.
Table 2-4: Absolute maximum rating
Item Rating Unit
Power supply voltage 70.2 to +5.9 V
Input voltage «0 2 to +5 9 V
2.4.2 Electrical characteristics
Table 2-5: Electrical characteristics
(Conditions) Temperature, 25 °C, Humidity. 50 %RH
Item Min Max Unit Remarks
Power supply vollage (VDD) ‘1 a 15 3 45 V 00 input. GND = 0 v
Ripple voltage 50 mVpp or less
4 75 5 25 V Rate of rise at power-up‘ 1 les or less
Current capacity‘ 200 mA or more
Current consumption (Ivan) ‘2 100 mA RF ON: Approx. 70 mA
RF OFF: Approx. 20 mA
Current consumption (lspn) 100 uA VDD = .3 V, During soft power down
1000 uA VDD = .0 V. During soft power down
Signal
RXD H-Ievel input voltage VDD x 0 7 VDD V
RXD Lrlevel input voltage 0 VDD x 0 3 V
TXD H-level output voltage 248 V VDD = 3 3 V, IOH 6 mA
3.8 V VDD .O V. IOH 12 mA
TXD Lelevel output voltage U 5 V VDD .3 V, IOL mA
06 V VDD= .DV,|OL:1ZmA
‘1 Fully verify to noise from power supply. other modules and cables, since noise exerts deleterious effects on
communication performance
'2 Current consumption changes by power supply voltage, the existence ol cards, installation
Page 15
Rosozors Product Specifications F E I i I: a
2.5 Others
. Operating environment (no condensation or frost)
0 Performance assurance temperature/humidity"
0 "C 40 °C 50 IC
:fi
20 to 90 %RH 50 %RH or less
0 Function assurance temperature/humidity.2
—10 °C 0 "c 40 °C 60 Dc
4—»:{
20 to 90 %RH so %RH or less
’1 Guarantees 80% of Max. communication dlstance (25 ”C. 50 %RH) defined in section 2.1.1 “FeliCa communication" or
more
‘2 Guarantees normal operation of the RF communication processor, although the communlcation performance described
above cannot be assured in temperature extremes.
NOTE The board temperature inevitably rises if the ReaderNVriter is continually transmitting card access
commands (such as when polling a card). Make sure to design the enclosure so that the internal temperature
and humidity can be held within the specified ranges.
. Storage environment (no condensation or frost)
-30 “C 0 °C 70
on
60 %RH or less
o Mass : Approx.17g
2.6 Reliability specifications
c Shock , IE060068-2-27TeStEa
c Vibration : lE060068—2~B4Tesch
Page 16
RC-SGZO/S Product Specificalions
2.7 External dimensions
FEIiEEl
External dimensions of the module are illustrated below
(92.4101 X1 55:13.05
50(
— Camm pmnl
anmmn
an" Conn
NDN»ZlF
sclor
® ® !
‘ _l
0.4 * .7 ‘_
ND Pans Nhlelial QW Mesuremenl Tolerance
1 Nhgnelic sheel Sc" magnellc Sheel 1 < L g 4 t0 1
2 Metalplale SF'TE 1 4 < L g 16 102
3 Spacer Fblyurelhane loam 2 16 < L g 63 203
4 Cooling sheet Silicon sheet 1 53 < L g 250 1:0 4
5 Insulating (ape Polyeslerlape 1 250 < L g 106
5 Board 77 ,, J ,, 7' ' 1
Figure 2-2: External dimensions
Page 17
“Mining mm
Median
(Unit: mm)
ROSSZOIS Product Specifications F E I i E a
2.8 Label specifications
2.8.1 Position of spec indication label
Position 01 spec indication label is shown in following a figure:
Spec indication label
Figure 2-3: Position of spec indication label (metal plate)
2.8.2 Contents of spec indication label
Contents of spec indication label are shown in following a figure:
MononRC-SGZOIS nc:a.3/5v = 4-537-510-01
can ICES-3 Bums-a a "sup-cm-sox-nc-sszns
rcc ID:AKBRGSSZOS
Ic:4093-R0562l)s & C EEG
«((xxxxxxxxxxxxxx xxxxxxx 20 bar code
Sony corpomtlnn Made In Japan I Fabrlqub an Japan
Serial number
Figure 2-4: Contents of spec indication label
Page 18
Rc—sszo/s Product Specifications F E I i C B
2.9 RF performance and the use of magnetic sheet
- RF (communication) periormance Is closely related to the effecl'veness ufthe magnetic and metal sheets
used below and around the antenna of the module.
I RF performance varies considerably. depending not only on the magnetic permeability (p'. p").
dimensions and thlckness of the magnetic sheet but also on the dimensions and material of the metal
sheet used. There is also a possibility that it is affected by metal in the installation environment.
I The module is designed to be used with the specified magnetic and metal sheets attached in advance to
control the magnetic field generated by the antenna, as well as to minimize the possible effects from the
installation environment.
This contributes a great deal to the reduction of the time required for weighing the effects of the installation
environment and evaluating the module’s RF performance.
Page 19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2014:02:27 20:42:33+09:00
Creator                         : DocuCentre-III C4405
Modify Date                     : 2014:02:27 20:43:09+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2014:02:27 20:43:09+09:00
Creator Tool                    : DocuCentre-III C4405
Format                          : application/pdf
Document ID                     : uuid:78aa22fd-8869-4518-be87-d9caf5694b03
Instance ID                     : uuid:4ad6e22d-017a-428f-954c-195e8938aa2c
Producer                        : DocuCentre-III C4405
Page Count                      : 19

EXIF Metadata provided by EXIF.tools