Sony Group SPPA2780 Cordless Telephone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	145017
Application ID	RaTVUdwaUfx6GhxD1O6D+A==
Document Description	page 21 to page 38
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	152.94kB (1911776 bits)
Date Submitted	2001-04-16 00:00:00
Date Available	2001-05-22 00:00:00
Creation Date	2001-04-03 19:32:13
Producing Software	Acrobat PDFWriter 4.05 Windows
Document Lastmod	2001-04-03 19:33:16
Document Title	Users Manual
Document Creator	橡D:\Scandata\取説2.tif
Document Author:	æ©¡gaps

Setting the day and time,
Set the day and time so that you can stamp day and time for the
incoming messages. You will hear the recorded day and time when
you play back messages. You can set the day and time only with the
cordless handset. Make sure the base phone is not in use before you
start the setfing.
1 Press-.
2 Turn Jog Dial to choose "DAY/
TIME", and then press [03 Dial.
(BO BQCK)
PSUNDQY
tMONDRY
t thé torrent day of the week
by turning Jog Dial, and then
press Jog Dial. The time that has
been last set appears on the
display
ENTER HOUR QND
PRESS JDB DIAL
12:00QM
4 Set the hour (1 to 12) by turning
Jog Dial
ENTER HOUR GNU
[TEQESS JUB DIAL
Getting Started -
T l musmsn-uenss 2! f 01321357 um Thar?
SPP-A27BD 3-232-1 53-1 1 .US
step 6: Setting the day and time (continued)
5 Press JogDiaL ENTER MIMUTE nun
TlFEgg JOE DIQL
. 4 « _ ENTER MINUTE AND
6 Set lhenunute (00 L059)by LumulglogDrdl “Es? JOB EImL
7 PressjogDiaL SELECT QM/PM QND
PRESS JOG DmL
IIZOIQM
8 Select "AM” or ”PM" by turning Jog Dial, and
then press Jog Dial.
You hear a long confirmation beep. Then the
phone stars counting time.
Notes
- Donor allow more thana) seconds to ehpse during the operation procedure.
- ”SUN 12:00AM” on the diaplay ill the base pllwne flashes when the day and
tune is cleared due to a power imerrupfion, or when you conned the base
phone to the AC outlet for the first time.
. If the current day and time are ml sel, you will not hear a time stamp when
you play bark recorded messaga.
- When ”ERROR" appears on thedisphy and five shark emu beeps Me heard
after Jog Dial is pressed instep a, move the cordless handset closer to the
base phone, make sure the base phone is not in use, and then start over the
procedure.
Tip
When you select "(GO BACK)", you canmtum to the previous set display by
pasting Jog Dial.
22'” Getting Started
7 I musm swam 22 n|.325.&57pm
SPF-M780 3-232-153-11.US
Many lelepnone companies and senate providers nowadays oficr low?
rate long distance calls separate from your standard long distance
i," M") provider Such services are usually initiated by dialing an access
“a 1 t") number prior to the long distance call itself.
The 132 Access function enables you to dial the access number of these
fifi'llu < special long distance service companies by pressing just —.
After setting up the access number, you only need to press
m for dialing the access number or your special long
distame carrier.
You can set up the EZ Access function both the base phone and the
cordless handset, further more, you can set up an identical access
number on each unit (base phone and cordless handset).
1 Press < PGM) (If you’ re at lhe
base phone, press m. )
2 Press EZACCESS 4
E2 QCCESS
ENTER NUMBER
3 Enter the access number using
the dialing keys
4- 4 Press m -(0r— M)
You hear a long confirmation
beep
7315
Gaming Stalled
—H ouusmcsr-uzm as mnmm .
SPP—A2780 3-232-153-11.US
Setting up the EZ Access function (continued)
“MOS
- Do noi allow more than an seconds to elapse during the operalion procedure.
- You can register up in 32 digits as in access number.
"F
When you select ”(GO BACK)”, you can letum lo the previous 521 display by
plessing log Dial.
To change the access number
1 Perform steps 1 and 2 on page 73,
The current access number appears on the display
2 Press to erase the current access numberi
3 Enter a new access number using the dialing keys.
4 Press -. (If you‘re at the base phone, press
—»)
You hear a long confirmation beepi
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in step 5 on page 44, do as follows:
1 Enter the outside line access digit (e.g., 9).
2 Press —
24” Gatling Started
j ‘ swam ENE-v“ u onsassvw
SPF-A27BO 3-232-153-11.US
Chang ng the language of the d y
You can choose English or Spanish as the display language by
following the procedure below.
You can select the display language bokh the base phone and the
«mum handset, further more, you can select the display language on
each unit (base phone and cordless handset).
To change the language from English to
Spanish
1 Press - (Press
( PfifiERAM ) on the base phone.)
Tum Press
* 2 Turn Jog Dial to choose
K ”ESPANOL”, and then press log fig
Dial.
(60 Back)
ND
fit 7 ’51
3 Turn Jog Dial to choose ”SI",
and then press Jog Dial.
You will hear a long
confirmation beep,
Nine
Do not allow more than SOstcomis lo elapse during the operation pmcedm,
Gelting Started
—|| musmanuzus as m1.9.42m
SPP-AZ780 3-232-153-1 1.US
4}
Changing the language of the display (continued)
To change the language from Spanish to
EnglishSpanish
1 Press -. (Press on the base
phone.)
2 Turn Jog Dial to choose "ENGLISH", and then
press Jog Dial.
(REERESQR)
>N0
3 Turn Jog Dial to choose ”YES”, and then press
Jog DiaL
You will hear a long confirmation beep.
21:2"s Gemng Started
—| ‘ musm ET-uepes as yewm_9.4zw
SPF-A278!) 3-232-153-11.US
—] | ntusmsshuapes m l 3/28101.942AM
Assigning a station number on the
cordless handsets (supplied or
additional)
Therefore, this phone system can be expanded to toia] (out cordless handsets
The base phone station number is 0, and the Sn lied cordless handset station
number is L You can enhance the system by a lng up to three cordless
handsets (not supplied). Station numbers from 2 through 4 will be
automatically assigned to the cordless handsets in order of registration.
Before you start assigning, set all the unit of the system in standby mode and
place them close to each other (within a distance of 30 cm) Do the following
procedure only on the additional cordless handset
Supplled or
additional
“A cordless handset
1 Press -.
2 Press INTERCOM .
You hear a continuation beep.
ENTER SYSTEM ID
3 Enter the 10 dig-its system ID by
pressing the dialing keys.
The system ID is shown on a sticker
affixed to the bottom of the base phone. ‘
4 Press -.
You hear a long continuation beep and the assigned station number is
displayed.
Notes
- Do not allow more than 60 seconds to elapse during the operation procedure.
- Once you add a cordless handset to the base hone system, you oannot change the
station run-bets, or cancel the additional muons.
. When you prss any button other than to use an unregistered cordless
handset, lhe message "PLEASE REGEI'ER THIS HANDSEI'” will appear on the
display, and five short error beeps Will be heard You must first register the cordless
handset you want to add to the system.
0 Evan h'v to register a cordless hand-set which you already have added to the syslern.
the five short error beeps will be heard and the registration will be canceled
. If the registration is unsuccessful, "ERROR" will appear on the display, and five short
ermr beeps will be heard after ifi preset! in sun 4 ane the cordless handset ‘
closer to the base phone, and then start ova the proc ure. Getting Started -
SPF-M780 3-232-153-11.US
es mm
dent f g the parts
Refer to the pages indicated in parentheses for details
Base phone
wqflmlmaulfillfl
$- 1 Display window (p 35! 68, 76), ~ E REVIEW button (p. 69) Q
2 MEMO'REC button (p: 73) . - : Keep the Wye“ Pressed for a
R ds 0 mm playback revrew of the current
ecor 3 mm gs. message,
3 msésssfxes PLAY/STOP button 10 * TONE bum," [p' 33)
' Allows you to switch temporarily to
Plays back recorded messages. mm dialing
4 guy/Es; ONIOFF button 11 Dialing keys (P' 35)
um rne enewenng runners“ or E a button (pl 83)
off. Lights when the answering Used to change the number of
function is on, and flashes when a digits cf the phone number in the
new message is recorded, Caller 10 list
i! Handset (p. 12, 35, 41) fl quncx button (p, 69)
6 >>l SKIP button (p, 69) Keep fiwbutton Pressed for quick
P . - playback of meessgee
ress [D skrp lu the next message.
2] l« REPEAT button (p, 59) E “ASE “m" ‘P' 24' 71)
Press once he repeat the current @ PROGRAM button (P4 23)
message or twice to go back to the m VOL _ button
previous message (P- 35, 69)
8 Speaker Adjusts the handset or speaker
28"s Gettmg Started volume.
hi | mum swam as Q 0112.11.35va | r
SPF-M780 3-232-153-11.US
17
IaEiI
VOL + Button
(p. 35, 59)
Adjusts the handset or speaker
volume
Jog Dial (p 21, 77)
E2 ACCESS button (p. 23, 35)
Lets you make a long distance call
with the registered access number.
REDIALIPAUSE button (p, 37)
Redials one of the hat five numbers
called/inserts a pause in the dialing
sequence.
CALL WAITING/FLASH button
(p. 36, 85)
Switches m a second call if yuu
have ”call waiting" servxee, or lets
you make a new call.
INTERCOM button (p 56)
[Ms you talk between the base
phone and cordless handset,
—| ’ niUSMGEY-URDCS 29
”EB
SHE
e»
HOLD button (p. 36)
Puts a call on hold.
SPEAKERPHONE button
(P« 35)
Lets you make or receive a call.
MIC (microphone) (p 60, 73)
Antenna (p. 12, 86)
Hook for Ac power adaptor
cord (p. 12, 86)
DC IN 9V jack (p. 12, 86)
LINE (telephone line) iack
v (p 12, 86)
HANDSET jack (p. 12)
Gemng Started
m Mummy.
SPF-M780 3-232~153-11.US
Identifying the parts (continued)
Cordless handset
Antenna ' 9 CALL WAITING/FLASH button
(P 33, 85)
S k r
2 pea e Switches to a mond can if you
3 Display window (p. 32, 76) have "call waiting" service, orlets
Z‘ TALK bum)“ (P- 32) you make a nPW cal]
E E: ACCESS button (1). 23, 33)
has you make a call with the
registered access number.
Lets you make or receive a call.
5 HOLD/PLAY BACK button
(P 33, 68. 72)
Puts a call on hold/plays back 11 “ASE bum" (P 18. 45, 71)
recorded messages. 1_2 Jog Dial (p. 17, 43, 77)
E Battery compartment (p. 14) fl OFF button (P 32, 40)
1 it button (p. 53) Allows you to disconnect the call.
22:15 am xxamgmfme u INTERCOM button (13,5455)
Cane, ID 1m Lets you talk between the base
8 * [ONE I!“ (P ) Pl °‘ 9 a d the cordless handset,
“on . 33
d tempyanyw .6
Allows you“) SW" ‘ r 1 ‘E PM SKIP button (p 9)
tom dialing, Pms to skip to the next message.
3015 Getting Started
—' ‘ otusm swaps; so mm.357w
SPF-A278!) 3-232-1 53-1 1 .US
{g _L
\ T
EHQJ
Elsi—BI
K4 REPEAT button (174 69)
Press once to repeat the current
message or twice to go back m the
previous message.
Dialing keys (p 32)
PGM (program) button
(p, 17, 43)
RENAL/PAUSE button
(p. 24, 37)
Radials one of the last five numbers
called/mm a pause in the dialing
sequenceA
RINGER
MIC (Miaophone)
O (HEADSET) jack (p. 13, 39, x7)
VOL (volume) switch (p. 33)
Adjust the cordless handset
volume.
—| ’ musmeEr-uzws 31
Getting Started
m 323, 1:57 pm
SPF-M780 34232-153-1LUS
Basics
Making calls with the cordless handset
1 Pick up the cordless handset
from the charger.
2 Press and wait until
“TALK” appears on the display
and the display also shows the
talk time in hours, minutes and
seconds.
The dialing keys light up.
You then hear a dial tone.
”HANDSET 1 IN USE”
appears on the display of the
base phone when the cordless
handset with the station number
"1" is in use.
O (nansm
ink
If you hear five short error
beeps and “N0
CONNECTIO ” appears on the
display, move closer to the base
phone,
3 Dial the phone number.
4 When you're done talking, press
or replace the cordless
handset on the charger.
The display turns off.
To make a call after checking the phone number
You can dial the phone number before pressing or
—. If you make a mistake when dialing the phone number,
was to erase the number.
32“ Basics
—H «10305 412.985 a «reams-sum
SPP—A2780 3-232-153-11.US
I r
(1' musnsaAs-uzpss a: ’ onazsnasam
Making calls when the headset is connected
When a headset (opfional) is connected to the O
(HEADSET) jack on the mrdlpss handset, you can
bulk through the headset
Making calls using the EZ Access function
To set up the access number, see "Setting up the 122
Access function” on page 23.
1 Pick up the cordless handset from the charger.
2 Dial the phone number (mgr,
1-201-123-456101- 011-0.)
3 Press _ ' TQLK ‘I’I
"TALK" appears on the (“why I] QUI 123455
4 when you’l'e done talking, press or
replace the cordless handset on the charger;
Note
When you have registered a phone number in _, skip step 7.
Additional tasks
To Da this
Adina the cordless Set the VOL switdi to H (high), M (middle) or L (low)
handset volume
Pul a call on hold Press ”HOLD" appears on the display.
again or pick up the cordless handset
lmm the charger (When Quick talk is set to ”ON"; see
page 40) to resume the ounvelsalion
Swum to tone dialing Press (nous) after you’re connected.
ternpomily The line will remain in tone dialing until disconnected.
Swim so another call Press (WM).
(”fall waithlg” servioe') Press again lo return to the first
caller.
~ You need to subscribe to this servme from your telephone company.
SPF-M780 3-232-1 53-1 1 ,US
Making calls (continued)
notes
- When making a call on the cordless handset, ”Yd" appears on me display
indicating the receiver sensitivity with the base phwner Three bars iruiirate a
good leoeph'on, no bar indium a bad reception. When calling from an area
with poor recepti'on, you may experience interference or thecall may be
diseuruieued, why In use the cordless hamset in areas that have a good
reception,
- When you increase the sound volume. in some cases the back ground noise
may be increased as well You should adjust the vohnne accordingly.
, - mhe cordless handset beeps every second duringa conversation and "7'
appears on the display, move rloser to the base phone; otherwise, you will
hear live short error beeps and ”NO CONNECTION" will appear on the
display, and the call will be disconnected dfler30 seconds
. While Elking with an outside caller via the base hone, you cannot mke a
call with the cordless handset. If you press , “NO CONNECTION”
appears on the display and ynll will hear live shorter-m beeps.
- When the talk time exceeds 9:59:59, the display counts from omoo again.
If the battery becomes weak durlng a call
Tl»: umllm handset wlll beep twice per second, “BATIERY LOW”
appears on the display. Finish yourcall and replace the cordless
handse’r on the charger to charge the battery pack ‘
For optlmum performame, charge the battery for a full 12 hours.
Note that during the initial charge time (approx. 10 minutes), “PLEASE
win-rm and ”BAka LOW” appear on the display and the
cordless handset cannot be used.
Afier "BATTERY LOW" turns ofi, yotl may Be able to use (he cordless
handset, but the battery duration will be very short; thus it is
recommended that you fully charge the battery before next use.
34” Basics
—| l mu 544wa u ’ otazsosanm | fi
SPF-M780 3-232-1 53-11.US
Making calls with the base phone
Pick up the handsel or press
m on the base phom.
”TALK" or “SPEAKERPHONE” appears
on the display and the display also shows
the talk time in hours, minutes and
seconds
Dial the phone number.
mien yuu'm dune (Biking, replace the
handset in the cradle or preee
again
To make a call after checking the phone number
You can dial the phone number before picking up the handset or
before pressing m3, If you make a mistake when
dialing the phone number, press in erase the number,
‘Q Maklné calls Using lhe'EZ [Recess func‘tiSnA
To setup the acces number, see ”Setting up the EZ
Access function” on page 23
1 Dial the phone number (e.gr,
1-201-123-4567, or 011-
2 Press _
“SPEAKERPHONE” appears on the display.
3 When you're done talking, or press
(SPEAKEHPHONE) again.
Note
When you have leglstered a phone number In mes , skip srep z.
7 1 “mm” “5 4?
SPEQKERPHONE
”2011234587
01321353 Hm
SPF-M780 3-232-1 534 1.US
Ma lng calls (continued)
Additional tasks
To Dothis
Adjust the handset or Duri phone conversation, press or
speakerphone volume
There are 3 steps for the handset volume level, and
7 steps ion the speakerphone volume level.
Put a call on hold Pm . “HOLD” ap ears on the display.
Press -. _ 0: Pick "P the
handset hrnn the thee phone tn resunm the
conversah'olh
Switch to tone dialing Press (hm after you're connected.
temporarily The line will remain in tone dialing until
discomuded.
Switch to another call Puss _~
(”call walling" mvice‘) press again to return to the
first caller
- You need to subscribe to the service irvm your wephonecompany.
Notes
- While talking with an outside filler via the cordless handset, the display an
Q. thebase phone shows “HANDSEI' 1 IN USE” when the cordless handset Q
with the slafiml number “1” is in use, and you cannot make a call with the
base phmw.
. When the tallr time exceeds 95959, the display counts irem omoo again.
rip
You can switch between phone conversations via the handset and those via the
speakerphone, simply by pickin up the handset while Ialkmg ever the
speakerphone, orby passing m while talking over the handset.
To obtain the best speakerphone performance
- You may not be able to hear the other party's voice in a noisy placer
lherelore, use the speakerphone in a quiet room
- Do not bring your hand or ottter object too close to the microphone
or you will hear a shrill noise (“feedback").
- When the speaker volume is loud, or the base phone has been placed
close to a wall, you may find that the volume drops suddenly. This
is due to a circuit in the telephone designed to protect against
feedback. in such cases, lower the speaker volume slightly.
36” Basics
—| ‘ muses stapes as © 0132135an ‘ r
SPF-M780 3-232-153-11.US
Redia ing
Both the base phone and the cordless handset can each individually
store five dialed phone numbers.
1 Press HEDIAL/PAIJSE .
2 Display the name or phone
number you want to call by
turning Jog Dial, and then press
[03 Dial,
3 Turn Jog Dial to choose “DIAL”,
and then press Jog Diall
The phone number will be
redialed.
Notes
- The redialmemozy only regiswrs up to 32 digiu Exceeding numbers will not
b? I'PA‘IifllPd
- If an new number of the lung distancecall is registered in film, the
number mn-wl be stored [or the redial button use. To redial long distance
all, willl
—, press insiead 01 above step 3.
“vs
- Although the phone number disphyad on the redial list is up to 15 dlgn, me
redialjng will be successfuL
- “you redial the same number repgaledly, this number will only be (minted
as one number 01 the inn! five registered numbers that can be redialed‘
- When dialing (mm a phone number wnha regs-ma name, min name will
be displayed in the lisl in slep 2.
—| ‘ musnsaasuzm m l unusua-
SPP-A2780 3-232-153-11.US
Making calls (tomlnued)
To store the dialed phone number into the Phone Directory
1 Display the name or phone number you want to store by
doing steps 1 and 2 on page 37.
2 Turn Jog Dial to choose “PROGRAM”, and then press Jog
Dial,
3 Enter the name by doing steps 3 and 4 on pages 43 to 44.
4 Press -. (if you're at the base phone, press
—»)
You hear a long Confirmation beep, and like mime and the
number are stored.
Not.
The dialed phone numbers of up lo 20 digs can be stored in the Phone
Directory.
70 erase the dialed phone number one by one
1 Display the name or phone number you want to erase by
doing steps 1 and 2 on page 37A
2 Turn Jog Dial to choose “ERASE REDLAL”, and then press
Jog DiaL
3 Turn log Dial to choose “YES”, and than pres: Jog Dial
You hear a long confirmation beep, and the number is
erased.
To erase the entire dialed phone numbers at once
1 Pm: @i ("you’re at the base phone, press
_-)
2 Turn Jog Din] to choose ”NUSMORY MANAGE”, and then
press Jog Dial.
3 Turn log Dial to choose “ERASE ALL RDL”, and then press
Jog Dial. _
4 Turn Jog Dial to choose ”ERASE REDIAL", and then press
Jog Dial.
You hear a long confirmation beep, and the entire number
are erased.
38” Basics
‘H mu mums as ’ mozmfiepm
SPF-A278!) 3-232-1 53-1 1 US
l T

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:04:03 19:33:16+09:00
Create Date                     : 2001:04:03 19:32:13+09:00
Title                           : .橡.D:\Scandata\取説2.PDF
Author                          : .橡.gaps
Creator                         : .橡.D:\Scandata\取説2.tif
Producer                        : Acrobat PDFWriter 4.05 Windows
Page Count                      : 18

EXIF Metadata provided by EXIF.tools