Sony Group ZSBT1 Personal Audio System User Manual US1U2 indd

Download:
Mirror Download [FCC.gov]
Document ID	795338
Application ID	LP1TcHxhxQnqMN0hYDmlXg==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	59.91kB (748867 bits)
Date Submitted	2007-05-22 00:00:00
Date Available	2007-07-06 00:00:00
Creation Date	2007-05-15 11:17:06
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-05-16 19:44:46
Document Title	US1U2.indd
Document Creator	Adobe InDesign CS2 (4.0.4)
Document Author:	m4

CAUTION
3-099-777-21(1)
The use of optical instruments with this product will
increase eye hazard.
Information
Personal Audio System
Operating Instructions
US
Owner’s Record
The model number is located at the bottom and the serial number is located in the battery compartment.
Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No.
Serial No.
ZS-BT1
© 2007 Sony Corporation
Printed in China
For customers in the USA
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV
technician for help.
Music discs encoded with copyright
protection technologies
Basic Operations
This product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
For customers in the USA
Please register this product on line at
http://www.sony.com/productregistration
Proper registration will enable us to send you periodic
mailings about new product, services and other
important announcements. Registering your product
will also allow us to contact you in the unlikely event
that the product needs adjustment or modification.
Thank you.
To reduce the risk of fire or electric shock, do not place
objects filled with liquids, such as vases, on the apparatus.
Connect the apparatus to an easily accessible AC
outlet. Should you notice an abnormality in the
apparatus, disconnect the main plug from the AC outlet
immediately.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.
 . To resume play, press it again.
Stop playback
 .
Go to the next track
 ( on the remote) .
Go back to the
previous track
Locate a point while
listening to the sound
 ( on the remote) .
 (forward) or 
(backward)  while playing and hold it
Locate a point while
observing the display
 (forward) or 
(backward)  in pause and hold it until
you find the point. (On the remote, use
 or  )
Remove the CD
 .
Bluetooth SIG, Inc. and any use of such marks by Sony
Corporation is under license. Other trademarks and
trade names are those of their respective owners.
 TM and (R) marks are omitted in this manual.
the marking at the part near the outer edge.
 You cannot locate a specific track if “SHUF” or “PGM” is lit in the
display. Press  , and then press MODE  repeatedly until
“SHUF” and “PGM” disappears from the display.
begin to change in the display.
The unit automatically scans the radio frequencies and
stops when it finds a clear station.
If you cannot tune in a station, press TUNE + or – 
repeatedly to change the frequency step by step.
When an FM stereo broadcast is received, “ST”
appears.
* VOLUME +  and   on the unit have a tactile dot.
Before using the unit
To turn on/off the power
Connect the headphones to the  (headphones) jack .
Specifications
1 to AC IN
outlet
Connect the AC power cord  or insert six R20 (size D) batteries (not supplied) into the battery compartment .
Notes
 Replace the batteries when the OPR/BATT indicator  dims or when the unit stops operating.
Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the unit.
 To use the unit on batteries, disconnect the AC power cord from the unit.
 When you operate the unit on batteries, you cannot turn on the unit using the remote.
Radio section
Frequency range
FM: 87.5 - 108 MHz
AM: 530 - 1 710 kHz
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Tip
If the FM broadcast is noisy, press MODE  until “MONO” appears
in the display and the radio will play in monaural.
Using the Bluetooth function
This unit supports Bluetooth A2DP and AVRCP profiles.
For details on Bluetooth wireless technology, see
“Bluetooth wireless technology” on the back page.
To select the sound characteristic
Battery life
For player:
FM Radio reception
Press SOUND  repeatedly to select the audio emphasis
you want.
Choose
To get
Powerful, clean sounds, emphasizing low and
high range audio
Sony R20P: approx. 18 h
Sony alkaline LR20: approx. 38 h
CD playback
Light, bright sounds emphasizing high and
middle range audio
Sony R20P: approx. 6 h
Sony alkaline LR20: approx. 17 h
It is recommended that you use alkaline batteries.
Dimensions
Approx. 480 × 156 × 250 mm (w/h/d)
(19 × 6 1/4 × 9 7/8 inches) (incl. projecting parts)
Mass
Approx. 4.3 kg (9 lb. 8 oz) (incl. batteries)
Supplied accessories
AC power cord (1)
Remote control (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphones series
Percussive sounds, emphasizing bass audio
The presence of vocals, stressing middle
range audio
The whole dynamic range for music such as
classical music
Check the websites below for the latest information about
compatible devices.
For customers in the U.S.A.:

For customers in Canada:
English 
French 
For customers in Europe:

For customers in Latin America:

For customers in Asia and Oceania:

Listening to music of a Bluetooth mobile
phone or Bluetooth device
You can listen to music from your Bluetooth mobile
phone or Bluetooth device over a wireless connection.
Insert two R6 (size AA) batteries (not supplied).
Replacing batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the unit, replace all
the batteries with new ones.
Speaker
Full range: 10 cm (4 in.) dia., 3.2 , cone type (2)
Input
AUDIO IN jack (stereo minijack): Minimum input level 245 mV
Outputs
Headphones jack (stereo minijack)
For 16 - 64  impedance headphones
Power output
2.3 W + 2.3 W (at 3.2 , 10% harmonic distortion)
Power requirements
For player:
120 V AC, 60 Hz
9 V DC, 6 R20 (size D) batteries
For remote control:
3 V DC, 2 R06 (size AA) batteries
Power consumption
AC 14 W
Press MEGA BASS  to display “MEGA BASS” in the
display.
To return to normal sound, press MEGA BASS  to
disappear from the display.
ZS-BT1US.3-099-777-21(1)
Press  .
Notes
 “Passcode” may be called “Passkey”, “PIN code”, “PIN number” or
“Password”, etc. depending on the device.
 This unit only supports numerical passcodes up to 4 digits.
 The pairing standby status of the unit is cancelled after about 30
seconds. If pairing is not successful, redo the procedure from step 1.
 While connected to a Bluetooth device, this unit cannot be detected
and a connection cannot be established from another Bluetooth
device.
To erase all the pairing registration information
1 Press BLUETOOTH .
When the unit is connected with a Bluetooth
device (when the Bluetooth device name or other
information appears in the unit display), press and
hold BLUETOOTH OPR  on the unit for about 2
seconds to put the unit in Bluetooth standby mode.
2 Press CLEAR  on the remote.
“DELETE” appears.
3 Press ENTER .
“COMPLETE” appears and all the pairing information
is erased.
perform the pairing operation between the unit and the
Bluetooth device again.
 Depending on the type of Bluetooth device, you can
adjust the volume using the controls of the Bluetooth
device.
 When BLUETOOTH  is pressed while connected to
Bluetooth headphones, it may take some time until a
connection is made to the unit from another Bluetooth
device.
Listening to music on this unit using Bluetooth
headphones
You can listen to music played on this unit using your
Bluetooth headphones over a wireless connection.
In order to connect with a Bluetooth device after performing this
operation, you must enter the passcode again.
Playing music of a Bluetooth device
You can operate a Bluetooth device by connecting the
unit and a Bluetooth device using AVRCP. If the unit is
not connected with a Bluetooth device using AVRCP,
“NOT USED” appears when you operate the unit.
For details about the operations of the Bluetooth
device, refer to the operation manual supplied with
your Bluetooth device.
Once the connection is established, the unit display
changes as follows:
“LINKED”  Name of the Bluetooth device
3 Press  .
Depending on the Bluetooth device, you may need
to start up the AV software of the Bluetooth device
beforehand.
Follow the procedure below to listen to music from
Bluetooth devices with this unit.
Playing a CD
1 Press CD  on the unit.
“CD” appears in the display.
2 Press   on the unit, and place a disc with the
label side up on the CD tray.
To close the CD tray, press   on the unit.
Pairing this unit with a Bluetooth device

Connecting to registered devices

Playing music of a Bluetooth device
For details about the operations of the Bluetooth device,
also refer to the operation manual supplied with your
Bluetooth device.
4 Press VOLUME + or – to adjust the volume .
To check the address of a connected Bluetooth
device
Press DISPLAY  while the Bluetooth device name
appears in the unit display.
The Bluetooth device address appears.
To cancel the connection with a Bluetooth
device
Press and hold BLUETOOTH OPR  on the unit for
about 2 seconds until “UNLINKED” appears, or until
the information on the display (device name, etc.)
disappears.
Other operation
3 Press   on the unit.
The unit plays all the tracks once.
Track number
Playing time
Follow the procedure below to listen to music on this
unit with Bluetooth headphones.
Pairing this unit with Bluetooth headphones

Connecting to registered headphones

Playing music on this unit
For details about the operations of the Bluetooth
headphones, also refer to the operation manual supplied
with your Bluetooth headphones.
Pairing this unit with Bluetooth headphones
Pairing is an operation where Bluetooth devices register
with each other beforehand. Use the procedure below
to pair the unit with your Bluetooth headphones. Once
a pairing operation is performed, it does not need to be
performed again. If pairing is already completed, proceed
to “Playing music on this unit” on the back page.
1 Select a function other than the Bluetooth function.
2 Place the Bluetooth headphones to be connected to
this unit within 1 meter of the unit.
3 Put the Bluetooth headphones in pairing mode.
For details about the operations of the Bluetooth
headphones, refer to the operation manual supplied
with your Bluetooth headphones.
4 Press and hold BLUETOOTH OPR  on the unit for
about 7 seconds until the BLUETOOTH indicator 
flashes.
Sound output from the speakers is stopped.
5 Enter the passcode.
Note
MEGA BASS does not function when you use the Bluetooth
headphones to listen to a sound source other than through the
Bluetooth function (e.g., CD, radio, or AUDIO IN).
1) The
actual range will vary depending on factors such as obstacles between
devices, magnetic fields around a microwave oven, static electricity,
reception sensitivity, antenna’s performance, operating system, software
application, etc.
2) Bluetooth standard profiles indicate the purpose of Bluetooth
communication between devices.
To cancel passcode entry partway
Note
Bluetooth section
Communication system:
Bluetooth Standard version 2.0
Output:
Bluetooth Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m1)
Frequency band:
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method:
FHSS
Compatible Bluetooth profiles2):
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Supported codecs:
Receive: SBC (Sub Band Codec), MP3
Transmit: SBC (Sub Band Codec)
Press , , ,  on the unit (–,
+ and ,  on the remote) 
to enter the same passcode that was entered at the
Bluetooth device, and then press ENTER .
Once pairing is completed and the connection is
established, the unit display changes as follows:
“LINKED”  Name of the Bluetooth device
1 Press BLUETOOTH .
2 Establish a connection from the Bluetooth device.
To reinforce the bass sound
General
Preparing the remote
 If you cannot connect with a paired Bluetooth device,
Passcode entry may be required depending on the
type of Bluetooth device.
When “PIN” appears, enter the passcode at the unit
as follows:
2 Hold down TUNE + or –  until the frequency digits
To listen through headphones
2 to a wall
Notes on connections with Bluetooth devices
4 Enter the passcode.
(RADIOBAND  on the remote) repeatedly to
select FM or AM.
Press VOLUME +, – .
System
Compact disc digital audio system
Laser diode properties
Emission duration: Continuous
Laser output: Less than 44.6 μW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on the
optical pick-up block with 7 mm aperture.)
Number of channels
Frequency response
20 - 20 000 Hz +1/–1 dB
Wow and flutter
Below measurable limit
These operations may not be available for certain Bluetooth devices.
In addition, the actual operations may differ depending on the
connected Bluetooth device.
1 Press RADIO BANDAUTO PRESET  on the unit
To adjust the volume
CD player section
pairing operation.
For details about the operations of the Bluetooth
device, refer to the operation manual supplied with
your Bluetooth device.
When establishing a connection with this unit, select
the audio profile (A2DP, AVRCP) at the Bluetooth
device. If the Bluetooth device does not support the
AVRCP profile, you cannot perform playback or other
operations with the unit (See “Playing music on this
unit” on the back page).
Note
To listen to FM or AM
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
Other specifications
2 Press BLUETOOTH  on the unit.
3 Operate the Bluetooth device and perform the
Listening to the radio
Notes on DualDiscs
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With 3.2-ohm loads, both channels driven from 150 - 6 000 Hz; rated 1.8 W
per channel-minimum RMS power, with no more than 10 % total harmonic
distortion in AC operation.
unit within 1 meter of the unit.
 When pressing  (, , , ) on the unit, press
This equipment has very low levels of RF energy that
it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it
should be installed and operated with at least 20cm and
more between the radiator and person’s body (excluding
extremities: hands, wrists, feet and legs).
AUDIO POWER SPECIFICATIONS
1 Place the Bluetooth device to be connected to this
Notes
Press POWER .
Power sources
Pairing is an operation where Bluetooth devices register
with each other beforehand. Use the procedure below to
pair the unit with your Bluetooth device. Once a pairing
operation is performed, it does not need to be performed
again. If pairing is already completed, proceed to “Playing
music of a Bluetooth device” on this page.
To select CD function, press CD .
 The Bluetooth word mark and logos are owned by the
This equipment complies with FCC radiation exposure
limits set forth for uncontrolled equipment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65.
To reduce the risk of fire, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
Pause playback
Pairing this unit with a Bluetooth device
On the remote
This equipment must not be co-located or operated in
conjunction with any other antenna or transmitter.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
Press
until you find the point. (On the remote,
use  or  )
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
WARNING
To
To
Press
Pause playback
 .
Stop playback
 .
Select a file
/ on the unit
(/ on the remote) .
Find a point in a file
Hold down / on the
unit (/ on the remote) .
Follow the same procedure as in step 4 of “Pairing this
unit with a Bluetooth device” on this page.
Once pairing is completed and the connection is
established, the unit display changes as follows:
“LINKED”  Name of the Bluetooth device
To cancel passcode entry partway
Press  .
Notes
 “Passcode” may be called “Passkey”, “PIN code”, “PIN number” or
“Password”, etc. depending on the device.
 This unit only supports numerical passcodes up to 4 digits.
 The pairing standby status of the unit is cancelled after about 30
seconds. If pairing is not successful, redo the procedure from step 1.
 While connected to a Bluetooth device, this unit cannot be detected
and a connection cannot be established from another Bluetooth
device.
 Pairing may not be possible if other Bluetooth devices are present
around the unit. In this case, turn off the other Bluetooth devices.
To erase all the pairing registration information
1 Press BLUETOOTH .
When the unit is connected with a Bluetooth
device (when the Bluetooth device name or other
information appears in the unit display), press and
hold BLUETOOTH OPR  on the unit for about 2
seconds to put the unit in Bluetooth standby mode.
2 Press CLEAR .
“DELETE” appears.
3 Press ENTER .
“COMPLETE” appears and all the pairing information
is erased.
Note
To connect with Bluetooth headphones after performing this
operation, you must enter the passcode again.
Continued on back page 
Basic Operations
Other Operations
Precautions
Troubleshooting
Severe hum or noise
 If there are obstacles between the unit and your
Bluetooth device, remove or avoid the obstacles.
Playing music on this unit
Effects of other devices
You can operate this unit from Bluetooth headphones
by connecting the unit and Bluetooth headphones using
AVRCP.
 Bluetooth devices and wireless LAN (IEEE 802.11b/g)
1 Select a function other than the Bluetooth function.
2 Establish a connection with the Bluetooth
headphones.
Press and hold BLUETOOTH OPR  on the unit for
about 2 seconds until the BLUETOOTH indicator 
lights up, then release the button.
If more than one Bluetooth device that has been
connected in the past is present around the unit, the
unit attempts to connect with up to 3 most recently
connected devices. (Connection is attempted with up
to 3 devices in order from the most recently connected
device, and the attempts end when a connection is
established.)
Once the connection is established, the unit display
changes as follows:
“LINKED”  Name of the Bluetooth device
3 Start playback of the music for the function selected
in step 1.
Depending on the type of Bluetooth headphones, you
can operate this unit (playback, volume control, etc.)
using the headphone’s controls.
For details about the operations of the Bluetooth
headphones, refer to the operation manual supplied
with your Bluetooth headphones.
4 Press VOLUME + or –  to adjust the volume.
To cancel the connection with Bluetooth
headphones
Press and hold BLUETOOTH OPR  on the unit for
about 2 seconds until the BLUETOOTH indicator 
turns off.
Notes
 If you cannot connect with paired Bluetooth headphones,
perform the pairing operation between the unit and the Bluetooth
headphones again.
 When the unit is changed to a function other than the Bluetooth
function and BLUETOOTH OPR  on the unit is pressed while
connected to a Bluetooth device, it may take some time until a
connection is made with the Bluetooth headphones.
 This unit stores separate volume settings for when listening through
the speakers or  (headphones) jack  on the unit, or when
listening through Bluetooth headphones.
Bluetooth wireless technology
Bluetooth wireless technology is a short-range wireless
technology linking digital devices, such as personal
computers and digital still cameras. Using the Bluetooth
wireless technology, you can operate the units involved
within a range of about 10 meters.
The Bluetooth wireless technology is commonly
used between two devices, but a single device can be
connected to multiple devices.
You do not need wires to get connected as you do with
a USB connection, and you do not need to place the
devices face to face as you do with wireless infrared
technology. You can use the technology with one
Bluetooth device in your bag or pocket.
Bluetooth wireless technology is a global standard
supported by thousands of companies. These companies
produce products that meet the global standard.
use the same frequency band (2.4 GHz). When using
your Bluetooth device near a device with wireless LAN
capability, electromagnetic interference may occur.
This could result in lower data transfer rates, noise, or
inability to connect. If this happens, try the following
remedies:
 Try connecting this unit and Bluetooth mobile phone
or Bluetooth device when you are at least 10 meters
away from the wireless LAN equipment.
 Turn off the power to the wireless LAN equipment
when using your Bluetooth device within 10 meters.
 The radio waves broadcast by this unit may interfere
with the operation of some medical devices. Since this
interference may result in malfunction, always turn off
the power on this unit, Bluetooth mobile phone and
Bluetooth device in the following locations:
 In hospitals, on trains, in airplanes, at gas stations,
and any place where flammable gasses may be
present
 Near automatic doors or fire alarms
Using the display
Creating your own program (Program
Playing preset radio stations
You can check information about the CD using the
display.
Play)
1 Press RADIO BANDAUTO PRESET  on the unit
To check the total track number and
playing time of the CD
Bluetooth devices
You can check the websites below for the Bluetooth
compatible devices.
For customers in the U.S.A.:

For customers in Canada:
English 
French 
For customers in Europe:

For customers in Latin America:

For customers in Asia and Oceania:

remote)  then press ENTER  for the tracks you
want to program in the order you want.
Total track number
Total playing time
To check the remaining time
Press DISPLAY  on the unit while playing a CD. The
display changes as follows:
The current track number and playing time
To delete the last track of the program
Press CLEAR  on the remote while the unit is stopped.
Playing tracks repeatedly
(Repeat Play)
You can play tracks repeatedly in normal, Shuffle or
Program play modes.
1 Press CD .
“CD” appears in the display.
To check the order of tracks before play
Do this
1 Press REPEAT  until “ 1” appears.
2 Press  or  ( or  on
the remote)  to select the track that you want
to repeat.
3 Press  .
1 Press REPEAT  repeatedly until “
appears.
2 Press  .
”
Tracks in
1 Press MODE  repeatedly until “SHUF”
random order
appears, and then press REPEAT  to show “
”
2 Press  .
1 Press MODE  repeatedly until “PGM”
appears, and then press REPEAT  to show
“ ”
2 Program tracks (see step 3 of “Creating your
own program”).
3 Press  .
until the unit goes off automatically.
Each time you press the button, the indication changes
as follows:
“AUTO*”  “60MIN”  “30MIN”  “20MIN” 
“10MIN”  “OFF”.
If 4 seconds have passed after you pressed SLEEP ,
the minutes in the display are entered.
When the preset time has passed, the unit goes off
automatically.
To cancel the sleep function
Press POWER  to turn off the power.
Connecting optional component
Press   once if the CD is stopped and twice if the
CD is playing. The current program will be erased.
Then create a new program following the programing
procedure.
Presetting radio stations
You can store radio stations into the unit’s memory. You
can preset up to 30 radio stations, 20 for FM and 10 for
AM in any order.
1 Press RADIO BANDAUTO PRESET  on the unit
(RADIOBAND  on the remote) repeatedly to
select the band.
2 Hold down RADIO BANDAUTO PRESET  on the
unit for 2 seconds until “AUTO” flashes in the display.
3 Press ENTER  while “AUTO” flashes in the display.
The stations are stored in memory from the lower
frequencies to the higher ones.
The display’s backlight goes off while sleeping time is active.
You can enjoy the sound from a PC, TV, VCR, portable
digital music player, etc. through the speakers of this unit.
Be sure to turn off the power of each component before
making any connections.
For details, refer to the instruction manual of the
component to be connected.
1 Connect the AUDIO IN jack  on the unit to the
line output jack of the portable digital music player
or other components using an audio connecting
cable* (not supplied).
* For a PC: use a cable which fills the connector of your PC.
For a TV or VCR: use a cable with a stereo-mini plug on one
end and two phono plugs on the other end.
For a portable digital music player: use a cable with a stereomini plug on both ends.
2 Turn the unit and the connected component on.
3 Press AUDIO IN  and start playing sound on the
connected component.
The sound from the connected component is output
from the speakers.
 If there is equipment that generates electromagnetic
 Audio CD
General
 CD-R/CD-RW (CD-DA*)
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is a
recording standard used for Audio CDs.
The power is not on.
Discs that this unit CANNOT play
 CD-R/CD-RW other than those recorded in music CD
format
 CD-R/CD-RW of poor recording quality, CD-R/CD-RW
that has scratches or are dirty, or CD-R/CD-RW recorded
with an incompatible recording device
 CD-R/CD-RW which is finalized incorrectly
Notes on discs
 Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out. If there is a scratch,
dirt or fingerprints on the CD, it may cause tracking
error.
* When you select “AUTO”, the CD stops playing in 90 minutes at
most and the unit goes off automatically. When you are listening
to the radio, the radio goes off in 90 minutes.
To change the current program
display.
 You can play the same program again, since the program is saved
until you open the CD tray or turn off the power of the unit.
A single track
1 Play the music source you want.
2 Press SLEEP  on the unit to display “SLEEP”.
3 Press SLEEP  on the unit to select the minutes
Tip
 If you try to program 21 tracks or more, “FULL” will appear in the
To repeat
Falling asleep to music
Press ENTER .
Every time you press the button, the track number
appears in the programed order.
Tips
2 Proceed as follows.
 Connect the AC power cord to the wall outlet securely.
 Make sure the batteries are inserted correctly.
The sound from the Bluetooth headphones is
distorted.
 You cannot turn on the unit with the remote when you
 Turn down the volume of the unit using VOLUME
operate the unit on batteries.
There is no audio.
 Make sure the function you want to use appears in the
display window.
 Unplug the headphones when listening through
speakers.
Noise is heard.
 Someone is using a portable telephone or other
equipment that emits radio waves near the unit.
 Move the portable telephone, etc., away from the
unit.
CD player
 Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
 Do not expose the CD to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight as there can be a considerable rise in
temperature inside the car.
 Do not stick paper or sticker on the CD, nor scratch the
surface of the CD.
 After playing, store the CD in its case.
The CD does not play or “NO DISC” is displayed
even when a CD is in place.
 Place the CD with the label surface up.
 Clean the CD.
 Take out the CD and leave the CD tray open for about
an hour to dry moisture condensation.
 The CD-R/CD-RW is blank.
 There is a problem with the quality of the CD-R/
CD-RW, recording device or application software.
 Replace all the batteries with new ones if they are weak.
The sound drops out.
On safety
 Reduce the volume.
 As the laser beam used in the CD player section is
 Clean the CD, or replace it if the CD is badly damaged.
harmful to the eyes, do not attempt to disassemble the
casing. Refer servicing to qualified personnel only.
 Should any solid object or liquid fall into the unit,
unplug the unit, and have it checked by qualified
personnel before operating it any further.
 Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this unit. Attempting to do so
may damage the unit. Do not use such discs.
 Place the unit in a location free from vibration.
On power sources
 For AC operation, use the supplied AC power cord; do
not use any other type.
 The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet,
even if the unit itself has been turned off.
 Unplug the unit from the wall outlet when it is not used
for an extended period of time.
 When the batteries are not to be used, remove them to
avoid damage that can be caused by battery leakage or
corrosion.
 The nameplate indicating operating voltage, power
consumption, etc. is located at the bottom.
Press REPEAT  until “
” disappears from the display.
You need to preset a station with a weak signal manually.
1 Press RADIO BANDAUTO PRESET  on the unit
Playing tracks in random order (Shuffle
You can play tracks in random order.
1 Press CD .
“CD” appears in the display.
2 Press MODE  repeatedly until “SHUF” appears in
the display.
3 Press   to start Shuffle Play.
To cancel Shuffle Play
Stop playing first. Then press MODE  repeatedly until
“SHUF” disappears from the display.
Tip
During Shuffle Play, you cannot select the previous track by pressing
 ( on the remote) .
(RADIOBAND  on the remote) repeatedly to
select the band.
2 Tune in a station you want.
3 Hold down ENTER  on the unit repeatedly for
2 seconds until the preset number flashes in the
display.
4 Press PRESET + or –  on the unit repeatedly until
the preset number you want for the station flashes
in the display.
5 Press ENTER  on the unit.
The new station replaces the old one.
 The sound may drop out or noise may be heard when
using poor quality CD-R/CD-RW or if there is a
problem with the recording device or application
software.
Radio
Tip
The preset radio stations remain in memory even if you unplug the
AC power cord or remove the batteries.
 Reorient the antenna to improve FM reception.
 Reorient the unit itself to improve AM reception.
The audio is weak or has poor quality.
On operation
 If you are listening to an FM program near the TV with
Cleaning the cabinet
 Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder, or
solvent, such as alcohol or benzine.
If you have any questions or problems concerning your
unit, please consult your nearest Sony dealer.
 Replace all the batteries with new ones if they are weak.
 Move the unit away from the TV.
 If you are using the remote while listening to AM radio,
noise may be heard.
The picture of your TV becomes unstable.
an indoor antenna, move the unit away from the TV.
Bluetooth device
Pairing cannot be done.
 Move the Bluetooth device closer to the unit.
 Pairing may not be possible if other Bluetooth devices
are present around the unit. In this case, turn off the
other Bluetooth devices.
Connection is not possible.
 The Bluetooth device you attempted to connect does
not support the A2DP and AVRCP profiles, and cannot
be connected with the unit.
 Enable the Bluetooth function of the Bluetooth device.
 The pairing registration information has been erased.
Perform the pairing operation again.
 While connected to a Bluetooth device, this unit cannot
be detected and a connection cannot be established
from another Bluetooth device.
The sound skips or fluctuates, or the
connection is lost.
 The unit and the Bluetooth device are too far apart.
 If there are obstacles between the unit and your
Bluetooth device, remove or avoid the obstacles.
 If there is equipment that generates electromagnetic
radiation, such as a wireless LAN, other Bluetooth
device, or a microwave oven nearby, move them away.
The sound of your Bluetooth device cannot be
heard on this unit.
 Turn up the volume on your Bluetooth device first, and
then adjust the volume using VOLUME + or – .
ZS-BT1US.3-099-777-21(1)
Remote
The remote does not function.
 Replace all the batteries in the remote with new ones if
they are weak.
 Make sure that you are pointing the remote at the
remote sensor on the unit.
 Remove any obstacles in the path of the remote and the
unit.
 Make sure the remote sensor is not exposed to strong
light such as direct sunlight or fluorescent lamp light.
 Move closer to the unit when using the remote.
To reset the unit to factory settings
If the unit still does not operate properly, reset the unit to
factory settings.
Use buttons on the unit to reset the unit to its factory
default settings.
1 Remove all the batteries from the unit.
2 Disconnect and reconnect the power cord, and then
turn on the unit.
3 Press  , ENTER  and POWER  on the unit at
the same time.
All user-configured settings, such as preset radio
stations, are deleted.
After trying the remedies, if the problem persists, please
consult your nearest Sony dealer.
Messages
Reception is poor.
in a place subject to direct sunlight, excessive dust or
mechanical shock or in a car subject to the direct rays
of the sun.
 Do not place the unit on an inclined or unstable place.
 Do not place anything within 10 mm of the side of the
cabinet. The ventilation holes must be unobstructed for
the unit to operate properly and prolong the life of its
components.
 Since a strong magnet is used for the speakers, keep
personal credit cards using magnetic coding or springwound watches away from the unit to prevent possible
damage from the magnet.
location, or is placed in a very damp room, moisture
may condense on the lens inside the CD player section.
Should this occur, the unit will not operate properly. In
this case, remove the CD and wait about an hour for the
moisture to evaporate.
– . If your headphones have a volume control,
also adjust the volume using the headphone’s volume
control.
”.
 Press SOUND  repeatedly to select “
 Clean the lens with a commercially available blower.
 Do not leave the unit in a location near heat sources,
 If the unit is brought directly from a cold to a warm
radiation, such as a wireless LAN, other Bluetooth
device, or a microwave oven nearby, move them away.
 Turn down the volume of the connected Bluetooth
device.
 Replace all the batteries with new ones if they are weak.
On placement
If a station cannot be preset automatically
To cancel Repeat Play
Profile refers to a standard set of capabilities for various
Bluetooth product capabilities. This unit supports the
following Bluetooth version and profiles.
Bluetooth devices should be used within approximately
10 meters (unobstructed distance) of each other. The
effective communication range may become shorter
under the following conditions.
 When a person, metal object, wall or other
obstruction is between the devices with a Bluetooth
connection
 Locations where a wireless LAN is installed
 Around microwave ovens that are in use
 Locations where other electromagnetic waves occur
Stop playing first. Then press MODE  repeatedly until
“PGM” disappears from the display.
* For a track whose number is more than 20, the remaining time
appears as “− − : − −” in the display.
Supported Bluetooth version and profiles
Effective communication range
Playing order
To cancel Program Play

The number of tracks left and the time
remaining on the CD
Programed
tracks
Programed track number
4 Press   to start Program Play.

The current track number and the remaining
time of the current track*
Play)
Supported Bluetooth version:
Bluetooth Standard version 2.0
Supported Bluetooth profiles:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Press MODE  repeatedly until “PGM” flashes in the
display.
All tracks on
the CD
2 Press PRESET + or –  on the unit (PRESET + or – 
“CD” appears in the display.
3 Press  or  ( or  on the

(RADIOBAND  on the remote) to select the band.
on the remote) to tune in the stored station.
1 Press CD .
Press   to stop the CD playback.
Notes
 This unit supports security functions that comply with the Bluetooth
specification as a means of ensuring security during communication
using Bluetooth technology. However, this security may be
insufficient depending on the setting contents and other factors, so
always be careful when performing communication using Bluetooth
technology.
 Sony cannot be held liable in any way for damages or other loss
resulting from information leaks during communication using
Bluetooth technology.
 Bluetooth communication is not necessarily guaranteed with all
Bluetooth devices that have the same profile as this unit.
 Bluetooth devices connected with this unit must comply with the
Bluetooth specification prescribed by the Bluetooth SIG, Inc., and
must be certified to comply. However, even when a device complies
with the Bluetooth specification, there may be cases where the
characteristics or specifications of the Bluetooth device make it
impossible to connect, or may result in different control methods,
display or operation.
 Noise may occur or the audio may cut off depending on the
Bluetooth device connected with this unit, the communications
environment, or surrounding conditions.
You can arrange the playing order of up to 20 tracks on
a CD.
Discs that this unit CAN play
Bluetooth device
LINKED: Bluetooth communication was established.
UNLINKED: Communication with a Bluetooth
device was cut off for some reason, or Bluetooth
communication was ended.
NO DEVICE: A pairable Bluetooth device was not found,
or connection was not possible.
NOT USED: The unit is not connected with a Bluetooth
device using AVRCP.
PIN: The unit is asking for the passcode. For details, see
“Using the Bluetooth function” on the front page.
PLEASE WAIT: The unit is readying for usage of a
Bluetooth device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Trapped                         : False
Producer                        : Acrobat Distiller 7.0.5 (Windows)
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Create Date                     : 2007:05:15 11:17:06+09:00
Creator Tool                    : Adobe InDesign CS2 (4.0.4)
Modify Date                     : 2007:05:16 19:44:46+09:00
Metadata Date                   : 2007:05:16 19:44:46+09:00
Format                          : application/pdf
Creator                         : m4
Title                           : US1U2.indd
Document ID                     : uuid:e18304ef-f362-4fe8-85e1-737e3339db85
Instance ID                     : uuid:81ee95b3-7529-4c37-8e93-67b18186a3d7
Page Count                      : 2
Author                          : m4

EXIF Metadata provided by EXIF.tools