Sony A3880003 Licensed transmitter User Manual 08 user guide part 2

Sony Mobile Communications Inc Licensed transmitter 08 user guide part 2

UserManual.wiki >

A3880003 User Manual >

08 user guide part 2

Contents

1. 08 user guide part 1
2. 08 user guide part 2

08 user guide part 2

251Continued on next pageData Display/Edit/ManagementManaging the microSD CardFormatting the microSD card enables you to use the card on the FOMA terminal or check the usage status.Formatting the microSD cardzWhen the memory card is formatted, all the stored data are deleted. Check if there is an important data before formatting. 1Category screen (p.247)u (FUNC) “microSD format”Enter your security code“YES”Checking the microSD card usage statusYou can display the amount of available space and data stored on the microSD card. zThe displayed memory capacity is smaller than the memory capacity indicated on the microSD card. zNumber of files that can be stored on the microSD card→p.2461Category screen (p.247)u (FUNC) “microSD info”Setting the USB Mode<USB mode setting>You can set the USB mode to use various functions by connecting a PC and the FOMA terminal. zUSB mode is categorized into “Communication mode”, “microSD mode” and “MTP mode”. 1i“SETTINGS”“External connection”“USB mode setting”The “USB mode setting” screen appears. 2Select any item: Communication mode……Uses the external connector for packet communication, 64K data communication or data exchange via cable connection. • “ ”: The FOMA USB Cable with Charge Function 01/02 is connected and data are ready to be exchanged between the FOMA terminal and a PCmicroSD mode……Uses the external connecter as a reader/writer of the microSD card. • “ ”: The FOMA USB Cable with Charge Function 01/02 is not connected• “ ”: The FOMA USB Cable with Charge Function 01/02 is connected (You cannot transfer data between the FOMA terminal and the microSD card, display data in memory or format the microSD card)zTo check whether the i-motion or Chaku-Uta-Full® can be moved, see “i-motion info” (p.233), “File property” (p.274) or Icons (pp.227, 274). * Make sure to format the microSD card on the FOMA SO706i. You may not be able to use the microSD card formatted on the other terminal or PC. NzDo not remove the microSD card while formatting. This may cause a malfunction to the FOMA terminal or microSD card. zData stored on the microSD card are not guaranteed if formatting is interrupted. N<Communication mode>PCPCmicroSD cardFOMA terminalFOMA USB Cable with Charge Function 01/02 (optional)FOMA USB Cable with Charge Function 01/02 (optional)<microSD mode/MTP mode>

252Data Display/Edit/ManagementMTP mode……Uses the external connector for WMA data exchange. • “ ”: The FOMA USB Cable with Charge Function 01/02 is not connected• “ ”: The FOMA USB Cable with Charge Function 01/02 is connectedUsing the FOMA Terminal as a microSD Reader/WriterYou can connect the FOMA terminal to a PC with the microSD card inserted and read/write the data in the microSD card. zTo use the FOMA terminal as a microSD reader/writer, the following devices are required. 1USB mode setting screen (p.251) “microSD mode”When set to “microSD mode”, “ ” appears.2Connect the FOMA terminal and a PC with the FOMA USB Cable with Charge Function 01/02The “ ” icon is displayed. The microSD card is displayed in My Computer window on the PC as a storage memory (external storage device). To remove the FOMA USB Cable with Charge Function 01/02 from the PC, follow the safe removal procedure on each OS.Setting How to Print Images Stored on the microSD Card<DPOF setting>You can set DPOF (Digital Print Order Format) to the images stored in the microSD card. zDPOF is a format to print the images shot by digital camera. zWhen you save still images shot with the FOMA terminal to a microSD card, and specify still images to print, the number of sheets, etc., you can print the images on a DPOF-compatible printer or in a print service shop. 1Folder list screen (p.225)“microSD”“Picture”Select a folderu (FUNC)“DPOF setting”■To use DPOF set OneMove the frame to the image you want to set on the image list screen or select the image to display the My picture screen. When you select the My picture function menu, go to Step 3.2Select the settingDPOF set One……Sets the print settings for one image.DPOF set Choice……Selects images to set DPOF settings. “About multiple-choice” →p.383“Print”Select any item: Print Sheets……Enters the number of sheets (01 to 99) to print. a date……Selects whether to stamp the date. ■To cancel the print setting of the selected image“Print OFF”Item DescriptionCable FOMA USB Cable with Charge Function 01/02 (optional)PC PC with USB port (compliant with the Universal Serial Bus Specification Rev1.1/2.0) compatible with the FOMA USB Cable with Charge Function 01/02 (optional)Supported OSWindows 2000, Windows XP, Windows Vista (Japanese edition)■ImportantzEnsure that the FOMA terminal and PC are properly connected. An improper connection could not only prevent data exchange but also result in the loss of data.zAttempting to exchange data when the FOMA terminal’s battery level is low or empty could not only prevent data exchange but also result in the loss of data. Make sure that the FOMA terminal’s battery is charged enough. Also, check the power of PC. zDo not remove the FOMA USB Cable with Charge Function 01/02 while copying the data from the PC to the FOMA terminal (the center illumination lamp flashes). This may prevent not only data exchange but also result in the loss of data.

253Continued on next pageData Display/Edit/Management■To cancel the print setting of all the stored images“All print OFF”4o (Finish)Working with Folders and FilesYou can add folders to each folder/microSD folder list screen of the Data Box to organize the files. ■Movable contents folderzFor Music, you can use the function menus “Add folder”, “Edit folder name”, “Delete folder” and “Memory info” of the following “ Folder list” screen.zFor i-motion, you can use the same function menus as the following “ microSD folder list” screen. Creating, editing and deleting foldersFolder list screenAdd folder……Enters a folder name to add a folder. You can enter up to 10 double-byte or 20 single-byte characters. Edit folder name……Edits the folder name of the added folder. You can enter up to 10 double-byte or 20 single-byte characters. Add shortcut*1 →p.94Delete folder……You can also delete a folder that stores data.• For Music, select the deleting method from “Delete this/Delete selected/Delete all” after entering your security code. “About multiple-choice” →p.38Delete all*2*3……Deletes all the stored data. Note that the data saved in the secret folder are not deleted. Edit playlist*4……Starts editing the playlist. “Playing melodies in your preferred order”→p.242Release playlist*4……Releases the playlist. Memory info……Displays the amount of the stored data. *1: It is only available in the Music. *2: “Delete all image” appears for My picture, “Delete all” for i-motion and Melody, and “Delete all doc.” for My document.*3: Not available for Music, movable contents folder of Music and Music&Video Channel.*4: Available only when the playlist folder of Melody is highlighted. microSD folder list screen (p.248)Edit folder name*1……Edits the folder title. You can enter up to 31 double-byte or 63 single-byte characters. *2Create folder*1……Enters a folder name to create a folder. You can enter up to 31 double-byte or 63 single-byte characters.*2Delete folder……Deletes a folder. Memory info……Displays the amount of the stored data. *1: Not available for “Image Box” or “Decorate PI”. *2: You can enter up to 10 double-byte or 20 single-byte characters for i-motion movable contents folder or Melody. NzYou can set the DPOF setting up to 999 images. However, you cannot print up to the specified number depending on the printer. zYou cannot set the DPOF settings for following images:• An image whose width or height exceeds 2,592 dots• An image whose total number of dots exceeds 2,592 × 1,944 dots• An image whose file size exceeds 2M bytes• A progressive JPEG image whose width or height exceeds 854 dots• A progressive JPEG image whose total number of dots exceeds 854 × 480 dotszYou may not be able to set the DPOF setting when the space is not enough on the microSD card. zYou can check the number of sheets you set in “Image info”. N<Add folder>zThe maximum number of folders of the movable contents folder is 65,535 and the maximum number of files that can be stored in a folder is 65,535. <Delete folder/Delete all image/Delete all>zIf you try to use “Delete folder”, “Delete all image” or “Delete all” to delete an image or movie that has been set in a display, original animation or user icon of Schedule, or if you use “Delete folder” or “Delete all” to delete a melody that has been set as a ring tone or alarm or set in a playlist or random melody, the corresponding feature (display, etc.) changes as follows:• The screens, ring tone and alarm settings are reset to the default. • The original animation, playlist and random melody are canceled. • The alarm notification screen for the schedule switches to the screen on which you set “ ”.

254Data Display/Edit/ManagementWhen the memory is insufficient or there are too many stored itemsWhen you try to save the photographed still images, movies or downloaded data, a message appears asking whether to delete some unnecessary data to save the new data. To save the new data, delete unnecessary data. 1 Select “YES” on the message■Not to save the data“NO”2 Select a folderSelect data to be deletedSome data co-use the storage area, select which data is to be deleted before selecting a folder. 3 o (Finish)“YES”o (Finish) is not displayed until enough memory is allocated to save the data.Managing the Phonebook and SMS on the FOMA Card<UIM operation>You can exchange phonebook or SMS data between the FOMA terminal (Phone) and the FOMA card (UIM). You can also delete SMS data or phonebook entries stored on the FOMA terminal (Phone) or FOMA card (UIM). zYou cannot send/receive a voice/videophone call or i-mode mail while copying or deleting data. Also, you cannot activate other functions. zYou cannot copy items that cannot be stored in the UIM phonebook. Items and number of entries that can be copied→p.70zYou can save the received SMS and sent SMS up to 20 in total on the FOMA card (UIM). Copying or deleting the phonebook entry or SMS from the main menu<Example: To copy the phonebook entry or SMS>1i“LIFEKIT”“UIM operation” Enter your security codeWhen you enter your security code, “ ” appears and communication such as incoming calls becomes unavailable. If you receive a call or other communication before entering your security code, the UIM operation ends. 2“Copy”■To delete“Delete”3“Phone →UIM” or “UIM →Phone”■To delete“Phone” or “UIM”4Select any item: Phonebook……Searches and displays the phonebook list screen. How to search the phonebook→p.73SMS……Selects the SMS data. Inbox……Displays the Inbox list screen. Outbox……Displays the Outbox list screen. 5Use b to select a checkbox (□)o (Finish)“YES”Select “YES” one more time when you copy the phonebook from the FOMA terminal (Phone) to the FOMA card (UIM).UIM operation screen (p.254)zFor the phonebook, available functions vary depending on the selected tab, etc. Start copy*1……Starts copying operation. Start deletion*2……Starts deleting operation. Select this……Selects the data. Select all……Selects all the data. Release this……Deselects the selected data. Release all……Deselects all the data. NzWhen you attempt to access the data in the microSD card while i-αppli saves data to the microSD card, a message appears notifying that you cannot operate the card. <Create folder>zYou cannot create folder in the “Image Box” or “Decorate PI” on the FOMA terminal. You can create these folders on a PC, etc. UIM operation EX. Phonebook (Search all)Function menup.254

255Data Display/Edit/ManagementDetail……Displays the data details. *1: Available only with the copy screen. *2: Available only with the delete screen. Copying a phonebook entry from the phonebook detail screen1Phonebook detail screen (p.73)u (FUNC)“Copy to UIM” or “Copy from UIM”“YES”The menu displayed when u (FUNC) is pressed depends on where to save the phonebook entry (to the FOMA terminal or the FOMA card (UIM)). Moving or copying SMS from the mail screenzYou can perform the UIM operation on the mail screens from the function menus of received mail list/detail screens and sent mails list/detail screens. <Example: To move or copy received SMS on the FOMA terminal to the FOMA card (UIM)>1Received mail list screen (pp.170, 171) Highlight SMS2u (FUNC)“UIM operation”“Move to UIM” or “Copy to UIM”“YES”■To move or copy received SMS on the FOMA card (UIM)“Move from UIM” or “Copy from UIM”Move or copy to the “Inbox” folder. Infrared Data Exchange/iC CommunicationYou can exchange the data such as phonebook entries and received mails with other devices with the Infrared data exchange or iC communication function. zData exchange function of the FOMA terminal via the Infrared data exchange/iC communication conforms to the IrMC™1.1 standard. However, you may not be able to forward data depending on the other party’s device or the application even when IrMC™1.1 is supported. zYou can forward the data one by one or all data at one time. zYou can forward the data as shown in the Table 2 (p.256).N<Phonebook>zCopying the phonebook from the FOMA terminal (Phone) to the FOMA card (UIM) converts “katakana” included in name and reading to double-byte. You can copy up to 10 double-byte or 21 single-byte characters for name and up to 12 double-byte or 25 single-byte characters for reading, and remaining characters are not copied. zAs the number of phone numbers and e-mail addresses that can be stored in a single phonebook entry on the FOMA terminal (Phone) and FOMA card (UIM) is different, the second and subsequent phone numbers/e-mail addresses stored on the FOMA terminal (Phone) cannot be copied to the FOMA card (UIM). zAs the types of characters that can be used on the FOMA terminal (Phone) and FOMA card (UIM) are different, some characters may be converted to spaces or other characters. zPhonebook entries stored as secret data cannot be copied using this function even when the FOMA terminal is set to “Secret mode” or “Secret data only mode”. zIf the same group names are set on the FOMA terminal (Phone) and the FOMA card (UIM), the phonebook group settings are retained. If there is no group with the same name, the entries are stored in “No Group”. <SMS>zCopying the sent SMS will also copy the SMS report saved for the sent SMS. You cannot copy the SMS report only. zYou cannot protect SMS moved or copied to the FOMA card (UIM). If you move or copy protected SMS to the FOMA card (UIM), the protection is removed from the SMS on the FOMA card (UIM). “Replied to” or “Transferred” icon is also changed to “Read”. zWhen an SMS for Number B of 2in1 is moved or copied, it is saved as an SMS for Number A.

257Data Display/Edit/ManagementzYou can send/receive up to 9 double-byte or 18 single-byte characters for titles of still images, movies, i-motion and PDF data, and up to 25 double-byte or 50 single-byte characters for titles of Melody. If the length of the title exceeds the maximum, the exceeding part is deleted. zNote the following when you transfer the phonebook data: • The secret code cannot be forwarded. • When you transfer one data of the phonebook stored as the secret data, the secret setting is canceled when transferred. • The still images stored in the phonebook you receive are stored in the Inbox folder of “My picture”. However, if the amount of data exceeds the storage limit of “My picture”, the exceeding images are deleted and the phonebook is stored. zNote the following when you transfer the mail data: • Some phones may be unable to receive a part of a subject.• When receiving all the mails, the mails are received after deleting all the mails and user-created folders. • If there is not enough space in the Inbox when receiving one received mail, mails are deleted automatically in the order of old received mails. However, unread mails, protected received mails, i-mode mails and SMS in the secret folder are not deleted. It is recommended to protect mails you want to keep.• If there is not enough space in the Outbox when receiving one sent mail, the oldest unprotected sent mail in the Outbox is overwritten. • When there is an attached file whose downloading is not completed, the mail is sent after the attached file is deleted. • When the i-αppli launch information or mail-linked i-αppli information is pasted into the mail, the mail is sent after the pasted data is deleted. When the data attached to the mail is set to “File restricted”, the mail is also sent after the data is deleted. Also, a still image may be deleted depending on the file format. However, when sending sent mails or draft mails, the data received via cable connection or copied from the microSD card are sent even when they are set to “File restricted”. • You cannot transfer the received mail folder and sent mail folder of the mail-linked i-αppli. All the mails in the folder are saved to the Inbox or Outbox. • The setting of “Color coding” set in the received mail list screen or sent mail list screen cannot be transferred. • When using the Infrared data exchange, a mail larger than 2M bytes may not be sent correctly. zWhen original common phrases already fill in Folder 9 (“Original”) and fixed common phrases in Folder 1 to 8 have not changed since the time of purchase, received common phrases will be stored in Folder 1 to 8, overwriting the fixed common phrases.zThe data may not be saved in the same order depending on the model of the sender when transferring all bookmarks.Session numberzTransferring all requires the session number to authenticate the sender and recipient. Before sending or receiving, the sender and recipient should agree on a 4-digit number as the session number and then both enter the same number. Forwarding Data with Infrared Data Exchange<Infrared data exchange>When you forward data by Infrared data exchangezPlace the devices so that the Infrared data ports are aligned on the same level and facing each other.zDo not move the devices until the confirmation message about completing the exchange appears. Also, do not place anything between the devices or cover the Infrared data ports. zThe devices may not communicate successfully if they are placed in direct sunlight, directly under a fluorescent light, or close to other infrared equipment. Infrared data port Within the range of ±15°Approx. 20cm or less

258Data Display/Edit/ManagementTransferring one data at a time using the Infrared data exchange<Send/Receive Ir data>You can exchange one data at a time with other devices using the Infrared data exchange function. ●Sending one dataSelect “Send Ir data” from the function menu of Data list screen or detail screen. When you send the data of JPEG, you can select High-speed Ir send (IrSS™). <Example: To send one image> 1 My picture screen (p.226)u (FUNC) “Send Ir data” or “IrSS”■IrSS™JPEG image can be also sent by o (IrSS). 2Set the receiving device ready to receive3 Direct the Infrared data port toward the other part’s device“YES”The data transmission starts. When the data is sent, a notification message about completing the exchange appears. ■To cancel sending“NO”■To exit during sendingo (Quit)●Receiving one data1 i“LIFEKIT”“Receive Ir data”The “Receive Ir data” screen appears. 2 “Receive”Direct the Infrared data port toward the other party’s device Receive data from the other party’s deviceThe data reception starts.3 “YES”When the received data is saved, a notification message about completing the save appears. The received data is discarded if no operation is performed for about 30 seconds after it is received. ■To exit during the receivingo (Quit)■When you do not save the received data“NO”Receive Ir data screen (p.258)Add shortcut →p.94Transferring all data at a time using the Infrared data exchange<Send/Receive all Ir data>You can exchange all data at a time with other devices using the Infrared data exchange function. zWhen you receive all, all the data on the FOMA terminal is overwritten by the received data and stored data are deleted including protected mails and secret data of the phonebook or schedule. However, frames and secret data in the secret folder are not deleted. Check if there is an important data before receiving all the data. zTransferring all may change the order of data on the recipient. ●Sending all data at a timeSelect “Send all Ir data” from the function menu of Data list screen or detail screen. <Example: To send all data stored in the phonebook> 1 Phonebook list screen (p.73)u (FUNC)“Send all Ir data”2 Enter your security codeEnter session number“Session number”→p.2573Set the receiving device ready to receive4 Set the receiving device ready to receive“YES”Transmission of all data starts. When the data is sent, a notification message about completing the exchange appears.■To cancel sending all data“NO”■To exit during sendingo (Quit)NzWhen you select “IrSS”, the sender may be completed correctly even though the other party cannot received the data correctly.Receive Ir dataFunction menup.258

259Data Display/Edit/Management●Receiving all data at a time1Receive Ir data screen (p.258) “Receive all”2Enter your security codeEnter session number“Session number”→p.2573 Direct the Infrared data port toward the other part’s device“YES”■To cancel receiving all Ir data“NO”4Select “YES” when the overwrite confirmation screen appears■To cancel receiving all Ir data“NO”5Receive all data from other party’s deviceAll the data reception starts. When the received data is saved, a notification message appears indicating that the communication is completed. ■To exit during the receivingo (Quit)Forwarding Data with iC Communication<iC Communication>When transferring data using the iC CommunicationzPlace the FeliCa mark “e” on the FOMA terminal (sender) over the FeliCa mark “e” on the FOMA terminal (receiver). zData transmission may not be smooth depending on the FOMA terminal of the other party. Move FOMA terminals so that the FeliCa marks “e” of the sender and the receiver get close or distant, or move them to the right, left, up and down. Transferring one data at a time using the iC communication<iC transmission/Touch to receive data>You can exchange one data at a time with other devices using the iC communication function. ●Sending one dataSelect “iC transmission” from the function menu of Data list screen or detail screen. <Example: To send one phonebook data>1Phonebook detail screen (p.73)u (FUNC)“iC transmission”2Put the FeliCa mark “e” close to the FeliCa mark “e” of the other party “YES”The data transmission starts. When the data is sent, a notification message about completing the exchange appears. ■To cancel sending“NO”■To exit during sendingo (Quit)●Receiving one data1Put the FeliCa mark “e” close to the FeliCa mark “e” of the other party Perform the operation to send the data from the FOMA terminal of the other partyThe data reception starts and the progress bar appears. 2“YES”When the received data is saved, a notification message about completing the save appears. The received data is discarded if no operation is performed for about 30 seconds after it is received. ■To exit during the receivingo (Quit)■When you do not save the received data“NO”

260Data Display/Edit/ManagementTransferring all data at a time using the iC communication<iC trans. all/Touch to receive all>You can exchange all data at a time with other devices using the iC communication function. ●Sending all data at a timeSelect “iC trans. all” from the function menu of list screen or detail screen of the data you want to send all. <Example: To send all the phonebook data>1Phonebook list screen (p.73)u (FUNC)“iC trans. all”2Enter your security codeEnter session number“Session number”→p.2573Put the FeliCa mark “e” close to the FeliCa mark “e” of the other party “YES”Transmission of all data starts. When the data is sent, a notification message appears indicating that the communication is completed. ■To cancel sending all data“NO”■To exit during sendingo (Quit)●Receiving all data at a time1Put the FeliCa mark “e” close to the FeliCa mark “e” of the other party2Perform the data sending operation of all data from the FOMA terminal of the other party3Enter your security codeEnter session number“Session number”→p.2574Select “YES” when the overwrite confirmation screen appearsThe data reception starts and the progress bar appears.When the received data is saved, a notification message appears indicating that the communication is completed.■To quit receiving data“NO”■To exit during the receivingo (Quit)Forwarding Data by Cable Connection<OBEX™ connection>By connecting the FOMA terminal and your PC with the FOMA USB Cable with Charge Function 01/02 (optional), you can exchange various data such as phonebook entries or images. zWhen you exchange data using the FOMA USB Cable with Charge Function 01/02 (OBEX™ connection), you have to install “ドコモケータイdatalink” (DOCOMO keitai datalink) (p.329) and “FOMA通信設定ファイル” (FOMA Communication Setting File) in the provided CD-ROM. zFor details such as installing of the “ドコモケータイ datalink” (DOCOMO keitai datalink), refer to the download page of the software. For details on data exchange, refer to the help files of the software. zFor details on installing “FOMA通信設定ファイル” (FOMA Communication Setting File) and the operational environment, refer to “PC Connection” chapter and “Manual for PC Connection” (PDF format) in the provided CD-ROM. zSet “USB mode setting” to “Communication mode” before transferring data. Barring Phonebook Image Forwarding<Forwarding image>When you use the Infrared data exchange, iC communication, copying to microSD card function or data exchange (OBEX™ connection) to transfer phonebook data, you can prevent transferring still images stored in the phonebook. 1i“LIFEKIT”“Forwarding image”“OFF”■To forward“ON”■ImportantzEnsure that the FOMA terminal and PC are properly connected. An improper connection could not only prevent data exchange but also result in the loss of data.zAttempting to exchange data when the FOMA terminal’s battery level is low or empty could not only prevent data exchange but also result in the loss of data. Make sure that the FOMA terminal’s battery is charged enough. Also, check the power of PC. zAll the data on the FOMA terminal may be erased if an error occurs while forwarding all from PC to the FOMA terminal. Before forwarding all, check the cable connection, the battery level of the FOMA terminal and the power of PC.

261Data Display/Edit/ManagementUsing the Infrared Remote Control FunctionzTo use the remote controller function, download the software according to the device you use (the key operations of the remote controller vary depending on the software). z“Gガイド番組表リモコン ” (G-GUIDE program guide remote control) is pre-installed at the time of purchase.→p.194zThe remote operation may not be possible depending on the device. zYou cannot use the Infrared Remote Control during the Self mode. Using remote controlzPoint the infrared data port of the FOMA terminal directly at the remote control sensor on the TV, etc. and operate the FOMA terminal as a remote control. The remote control is effective within about 4 meters away from the device. This may vary depending on the ambient light level.Viewing PDF Data<My document>Use PDF Viewer to view PDF documents downloaded from sites and saved. You can also view PDF documents stored on a microSD card.zDownloading from sites→p.1451i“DATA BOX”“My document”The “Folder list” screen appears.2Select a folderThe “PDF list” screen appears.3Select a PDF documentThe “PDF data” screen appears.■If the password entry screen appearsEnter the password set to the PDF data.■If a message about resuming the download appearsYou are attempting to open a document, a part of which has been downloaded by page. You can additionally download the remaining pages later on.→p.145■If a message appears asking whether to download all remaining dataYou are attempting to open an incomplete PDF document which has been downloaded partially due to interruption at data acquisition, etc. You have to download the remaining data additionally.→p.145Infrared data portWithin about 4mWithin the range of ±15°Folder listＭｙｄｏｃｕｍｅｎｔＩｎｂｏｘＩｎｖｏｉｃｅＰｌａｎｎｉｎｇＲｅｐｏｒｔＲｅｆｅｒｅｎｃｅｍｉｃｒｏＳＤFunction menup.253NzIt may take a long time to display some PDF data.zA PDF data may not be properly displayed if it contain formats unsupported by the PDF viewer or complicated designs.zWhile viewing a part of a PDF data which has been downloaded by page, attempting to view a page that has not been downloaded starts the download. You can download the remaining pages at a time.→p.145zTo transfer a PDF document from a PC to the microSD card, use the specified folder tree/name.→p.244A document cannot be displayed on the FOMA terminal if the folder tree/name is different from the specified format.z“ ” flashes while viewing a PDF document stored on the microSD card.PDF listＩｎｖｏｉｃｅＱｕｏｔａｔｉｏｎ1Ｑｕｏｔａｔｉｏｎ2Ｉｎｖｏｉｃｅ1Function menup.262PDF data７０％５／１０×××××××××××××××××××××Ｑｕｏｔａｔｉｏｎ１Function menup.265

262Data Display/Edit/ManagementGuide to the PDF list■PDF type icon: File restricted data (data forwarding and copy to microSD card are unavailable)■Retrieval method icon■Allowable operation iconPDF list screen (p.261)/Document list screen (p.263)zThe usable functions vary according to the selected folder, so the items displayed in the function menu also vary.Edit title……Edits the title. You can enter up to 9 double-byte or 18 single-byte characters.Display document……For PDF document, select the page to display from “From the last”/“First page”/“i-mode bookmark”. For other documents, the contents are displayed from the first page.Document info……The file name of the PDF data/document, the date and time it was saved, and other information are displayed.DL remaining data*1……“Downloading remaining PDF data after downloading partially”→p.145Add desktop icon*1*2→p.94Compose message*3……Composes an i-mode message with the PDF document/document attached.iC transmission*1*2 →p.259Send Ir data*1*2 →p.258Copy to microSD*1*2→p.248Move……Select “Move this”/“Move selected”/“Move all”, then selects a destination folder and moves the PDF document/document to another folder. “About multiple-choice” →p.38Memory info……Displays the capacity used, etc.Sort*1*2……Sorts the PDF documents by the specified criteria.Delete……Select “Delete this”/“Delete selected”/“Delete all”. “About multiple-choice”→p.38Copy to phone*1*4 →p.249Copy*4……“Copying the data to the different folder in the microSD card”→p.250*1 : Available only with the PDF data list screen.*2 : Not usable on the list screen of the microSD card.*3 : This function is unavailable when 2in1 mode is in B mode.*4 : Not usable on the PDF list screen of the FOMA terminal.Icon Description (Pale blue) (blue)All the pages have been downloaded* The file size of the PDF document with a blue icon exceeds 2M bytes, which cannot be stored on the FOMA terminal (Phone). (Pale blue)Partially downloaded by pages (Pale blue)Incomplete data which has been downloaded partially (data forwarding unavailable)Icon DescriptionDownloaded from a site, etc.Obtained from a microSD card, PC, etc.Icon DescriptionCan be attached to an i-mode mail (2M bytes or smaller)Can be transferred via Infrared data exchange and iC transmissionCan be copied to the microSD cardNzA PDF document stored on a microSD card, which appears with a blue icon “ ” (blue) or “ ” (blue), cannot be viewed on the FOMA terminal.ＩｎｖｏｉｃｅＱｕｏｔａｔｉｏｎ1Ｑｕｏｔａｔｉｏｎ2Ｉｎｖｏｉｃｅ1Allowable operationPDF typePDF data titleRetrieval methodN<Sort>z“By source” sorts in the following order.①PDF documents downloaded from sites②PDF documents acquired via the Infrared data exchange or from a microSD card

263Data Display/Edit/ManagementViewing Documents<Document viewer>Document viewer is available to view a document attached to a mail message or stored on a microSD card.■Viewable document type1i“DATA BOX”“Document viewer”The “microSD folder list” screen appears.2Select a folderThe “Document list” screen appears.3Select a documentThe “Document view” screen appears.Guide to the document list■Document type icon■Allowable operation iconPDF Data Screen/Document View ScreenOn the PDF data screen and document view screen, the scroll bar to check the position on the screen and the tool bar for various screen operations are displayed.<PDF data screen> <Document view screen>Operations on the screenYou can use the dial keys with assigned functions and tool bar icons as well as the function menu to change the display mode such as zoom in/out.zYou can also set i-mode bookmarks and marks, or clip and save a page on the PDF data screen.Type ExtensionExcel xlsWord docPowerPoint pptNzIt may take long to display some documents.zA document may not be properly displayed if it contain formats unsupported by the Document viewer or complicated designs.microSD folder list (Document) ｍｉｃｒｏＳＤＦｏｌｄｅｒ1Ｆｏｌｄｅｒ2Ｆｏｌｄｅｒ3Ｆｏｌｄｅｒ4Ｆｏｌｄｅｒ5Ｆｏｌｄｅｒ6Ｆｏｌｄｅｒ7Function menup.253Document listＦｏｌｄｅｒ1Ｆｉｌｅ1Ｆｉｌｅ2Ｆｉｌｅ3Ｆｉｌｅ4Ｆｉｌｅ5Ｆｉｌｅ6Function menup.262Document viewDocument７０％５／１０Function menup.265zTo transfer a document from a PC to the microSD card, use the specified folder tree/name.→p.244A document cannot be displayed on the FOMA terminal if the folder tree/name is different from the specified format. Viewable document typeCan be attached to a mailNＦｏｌｄｅｒ1Ｆｉｌｅ1Ｆｉｌｅ2Ｆｉｌｅ3Ｆｉｌｅ4Ｆｉｌｅ5Ｆｉｌｅ6Document typeAllowable operation７０％５／１０×××××××××××××××××××××Ｑｕｏｔａｔｉｏｎ１Tool barScrollbarＤｏｃｕｍｅｎｔ７０％５／１０Scroll barTool bar

264Data Display/Edit/Management●Scrolling■Use b to scrollPress b in the direction you want to scroll.■a (▲マナー ), s (▼メモ) to scrollPress a (▲マナー ) to scroll up and s (▼メモ) to scroll down.●Guide to the tool bar8: Switches view/close of the tool bar (scroll bar)o (Tool): Switch from the page operation to the tool bar operationo (Cancel): Switch from the tool bar operation to the page operationc: Switch of the icon display during the tool bar operationv: Icon selection during the tool bar operation*: Available only with the PDF data screen.●Useful keys on the PDF data/Document view screen●Searching for text1PDF data screen (p.261)/Document view screen (p.263)o (Tool)Select “ ”Select the text entry boxEnter text to search forYou can enter up to 8 double-byte or 16 single-byte characters. However, some special characters may not be searched for.2Select the checkbox (□) of the conditiono (Search)When the text is found, a page containing the text appears.Press w to search from the current position to the beginning of the page under the same condition.Press q to search from the current position to the end of the page under the same condition.■To search in an Excel fileSelect “Search in page” or “Search in file”. “Search in page” searches in the currently displayed sheet. “Search in file” searches in the whole Excel document currently displayed.Icon DescriptionThe zoom factor appears. Specify a zoom percentage to display pages in the specified percentage.d (Select)Enter a 4-digit numberThe current page number appears. Specify a page number to go to the page.d (Select)Enter a 4-digit numberZooms out.Zooms in.Displays the entire page.Displays a page at 100%.Adjusts the page width to the display.Displays the first page.Displays the previous page.Displays the next page.Displays the last page.Searches for text.Rotates a page 90° clockwise.Rotates a page 90° counterclockwise.*Copies text.→p.308*“Clipping a page”→p.266Displays a description of an operation assigned to a tool bar or a key.*Displays a single page on the screen.ZoomPage*Displays pages continuously.*Displays the document in double-page spread.*Displays the Bookmark list screen.Key Description1Zooms out.2Displays the entire page.3Zooms in.4Displays the previous page.6Displays the next page.7Searches for text. →p.2648Switches view/close of the tool bar and the scroll bar.0Displays a description of an operation assigned to a tool bar or a key.qSearches next.wSearches previous.Icon Description

265Continued on next pageData Display/Edit/Management●Using a bookmark to view a PDF document■To use a “bookmark” already set in a PDF documentzIf bookmarks are already set in a PDF document, follow the steps below to jump to the location (page) where a bookmark is set.1PDF data screen (p.261)o (Tool)Select “ ”Select a bookmark you want to viewThe location (page) where the bookmark is set appears.If there is no bookmark in the PDF document, a message appears notifying that no bookmark is found.If you press o ( ) at the bookmark with , other bookmarks under the bookmark appear.■To use “i-mode bookmark”zi-mode bookmark allows you to set a bookmark anywhere you like so that you can immediately jump to any page or location (up to 10 bookmarks in one PDF document).zTo jump to the location (page) where you set an i-mode bookmark, follow the steps below:1PDF data screen (p.261)u (FUNC)“i-mode bookmark”Select an i-mode bookmark you want to viewThe location (page) appears in the same display mode (zoom, etc.) as the one when you set the bookmark.■To add an i-mode bookmarko (Add)“YES”Enter a title of the i-mode bookmarkThe current display mode (page, zoom, etc.) is saved as an i-mode bookmark.■To edit the title of an i-mode bookmarku (FUNC)“Edit title”Enter a title■To delete an i-mode bookmarku (FUNC)“Delete”“YES”■To delete all i-mode bookmarks set in a PDF documentu (FUNC)“Delete all”Enter your security code“YES”PDF data screen (p.261)/Document view screen (p.263)Zoom out……Zooms out a page.Zoom in……Zooms in a page.View types……Select the display size of a page from “Zoom to”/“Fit page”/“Actual size”/“Fit width”.Go to……Select a page to display from “First page”/“Previous page”/“Next page”/“Last page”/“Specified page”.Search*1……“Searching for text”→p.264Page layout*2……Select the page display style from “Single page”/“Continuous”/“ContinuousFacing”.Display link*1*2……Select a URL, phone number or mail address to access, make a call or compose an i-mode message.* The scroll and tool bars do not appear when you display the link destination in the document. Press t to return to the normal PDF data screen.Hide tool/scr.bars ⇔Show tool/scr.bars……Hides/shows the tool bar and scroll bar.Rotate view……Select the direction to rotate the page from “Clockwise”/“Counterclockwise”.Bookmark*2……“Using a bookmark to view a PDF document”→p.265Copy*1*2……Copies text. →p.308i-mode bookmark*2……“To use “i-mode bookmark””→p.265Mark*1*2……Adds/changes/deletes a mark. Up to 10 marks can be set.Capture screen*1*2……“Clipping a page”→p.266Compose message*1*3……Composes an i-mode message with the PDF document/document attached.Add desktop icon*1*2*4 →p.94DL remaining data*1*2*4……“Downloading remaining PDF data after downloading partially” →p.145Save*1……Saves the currently displayed PDF document/document.Help……Displays a description of an operation assigned to a tool bar or key.Document property*1*2……Displays the document properties.End……Closes the current screen.Document info*1……The file name of the PDF data/document, the date and time it was saved, and other information are displayed.ＢｏｏｋｍａｒｋＢｏｏｋｍａｒｋ1Ｂｏｏｋｍａｒｋ2Ｂｏｏｋｍａｒｋ3Ｂｏｏｋｍａｒｋ4Ｂｏｏｋｍａｒｋ5７０％５／１０×××××××××××××××××××××Ｑｕｏｔａｔｉｏｎ１

266Data Display/Edit/ManagementDelete this*1……Deletes the currently displayed PDF document/document.*1 : May not be available when viewing PDF data or documents attached in composing message or on a site.*2 : Available only with the PDF data screen.*3 : This function is unavailable when 2in1 mode is in B mode.*4 : Not usable for PDF documents on a microSD card.●Clipping a pageYou can clip a part of the PDF data screen and save as a JPEG image.1Display a page to clipo (Tool)Select “ ”d (Set)“YES”Select the destination folderThe clipped page is saved.NzAn image clipped out of a PDF document that is not allowed to be output from the FOMA terminal cannot be output from the FOMA terminal, e.g. attached to a mail or copied to a microSD card.zYou may not be able to clip an image if it is prohibited to copy the PDF document.

267Music&Video Channel/Music Playback■Music&Video ChannelMusic&Video Channel .................................................................................................... 268Setting Up Program ........................................................................................................ 268Playing Program ............................................................................................................. 270■MusicDownloading and saving Chaku-Uta-Full® from a Site ................................................... 272Playing Music.................................................................................................................. 273Using the Playlist ............................................................................................................ 275Saving the WMA Data on the microSD Card.................................................................. 276■Music PlayerUsing the Music Player ................................................................................ 277zIn this manual, Chaku-Uta-Full® and Windows Media Audio (WMA) file are described as “Audio data”. zYou can play Windows Media Audio (WMA) file and Chaku-Uta-Full® that are protected by the copyright protection function on the FOMA terminal. zWhen downloading the music data from websites, carefully read the use condition (permission and prohibition act, etc.). zWindows Media Audio (WMA) file that is protected by the copyright protection function plays with the specific information to your FOMA terminal. When the specific information in your FOMA terminal is changed caused by malfunction, repair or model change, Windows Media Audio (WMA) file saved before changing information may not be played.In the above case, transfer WMA files from your PC after deleting all WMA data in the FOMA terminal. zNote that NTT DOCOMO accepts no liability whatsoever for handling of the copy control CD (CCCD) and the music data that cannot be saved as a Windows Media Audio (WMA) file. zYou can enjoy the music stored in the microSD card and the FOMA terminal (Phone) within personal use. Take care not to infringe on the third party’s intellectual property right such as copyright. Do not copy or move the music data in the microSD card and the FOMA terminal (Phone) on a PC or other media. Music PlayerHandling the music data

268Music&Video Channel/Music PlaybackMusic&Video ChannelMusic&Video Channel is a service that a music program of up to 1 hour is automatically distributed during the night only by setting your favorite channel in advance. You can also enjoy the movie programs in high quality of up to 30 minutes. The program is updated regularly and you can enjoy the distributed program anytime such as during commuting time to work or school. ■Notes on using Music&Video Channel• Music&Video Channel is a pay service you need subscription (you need to subscribe to i-mode and Pake-Houdai/Pake-Houdai full beforehand). • Some programs may charge you an information fee besides the Music&Video Channel service charge. • For details on Music&Video Channel, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. • After you subscribe to the Music&Video Channel service, when inserting the FOMA card to a Music&Video Channel incompatible FOMA terminal, you cannot use the service. Even in this case, note that you would be charged the service fee unless you unsubscribe from the Music&Video Channel. • You cannot set or download Music Channel during international roaming*. Stop the distribution before you go abroad. Restart the distribution service after you come back. For details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. * : Note that the packet communication charges for the i-mode connection when you attempt to set or download programs during international roaming. ■BGM play (Background play)You can view i-mode sites or mails while playing a Music&Video Channel program.→p.280Setting Up ProgramWhen you set a desired program beforehand, the program data is automatically delivered at night. 1i“MUSIC”“Music&Video Channel”The “Music&Video Channel” screen appears. 2“Set program”Follow on-screen instructionsFor details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. ●Checking/canceling the program setting1Music&Video Channel screen (p.268) “Set program”Follow on-screen instructionsFor details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. NzYou can set 2 program for Music Channel at a time. zYou need to add a site providing Music&Video Channel programs to My Menu (p.141) before setting a program. zWhen you have not subscribed to the Music&Video Channel service, the message notifies you that the service is not subscribed. When you select “Music&Videoチャネルのお申し込みへ” (Subscribe to the Music&Video Channel) on the screen, you can subscribe to the Music&Video Channel service. NzResetting the program does not delete the added My Menu. Music&Video ChannelＭｕｓｉｃ＆Ｖｉｄｅｏｃｈ ○○ランキングＳｅｔｐｒｏｇｒａｍＰｒｏｇｒａｍｌｉｓｔＡｂｏｕｔｔｈｉｓｓｅｒｖｉｃｅ ○○ヒットチャートFunction menup.270

269Music&Video Channel/Music PlaybackAfter setting up the programz“ ” appears on the standby screen 12 hours before the downloading starts. zThe program is automatically downloaded at night, and the shortcut icon “ ” indicating Music&Video Channel is updated appears after successful downloading. The shortcut icon “ ” indicating Music&Video Channel is not updated appears when the downloading fails. In this case, you can download the program manually.→p.269●Guide to the icons on the Music&Video Channel screen: Partially downloaded program: Program with playback restriction (the icon turns to more light color overall, and then “ (gray)” turns to “ (red)” when the playback count, period or limit expires)●Downloading a program manuallyWhen the download of Music Channel is failed, you can download the program manually. 1Music&Video Channel screen (p.268)  Select a program“YES”NzIf the communication is interrupted, the FOMA terminal attempts to resume the downloading up to 5 times at 3-minute intervals. zYou can save 2 program. When a new program is downloaded, the previously downloaded program is deleted and you cannot play it. Save the program to the Data Box if you do not want to lose. →p.270zYou cannot copy the downloaded program. zYou cannot save the downloaded program to the microSD card. zSince downloading a program may take time, make sure that the FOMA terminal is fully charged and used in an area where the signal status is good. zDownloading failure is caused by the following reasons: “out of the service area”, “the terminal is turned off”, “no sufficient battery”, or “combination of Multitask/Multi access”, etc. In case that the downloading is failed for those reasons, the FOMA terminal will download the program at the next night. When download is interrupted, the FOMA terminal may not download the program. zThe FOMA terminal cannot download a program automatically when you insert a different FOMA card or after you initialize the terminal. Set programs again from the Music&Video Channel screen. zWhen you eject the FOMA card from the FOMA terminal that you set the program, and insert the card into other Music&Video Channel compatible FOMA terminal, the program is not downloaded automatically. When you select “Set program” on the Music&Video Channel screen, the FOMA terminal updates its program settings automatically and the program can be downloaded automatically. zThe program data in the program folder may be deleted when subscription to Music&Video Channel or i-mode is canceled.Icon Description The normal program The program corresponding to a synchronized play with a broadcasting waveProgram downloaded in failureThe program downloaded from sitesProgram included information for site access (URL)The program which has not been playedNzThe shortcut icon indicating that update of Music&Video Channel is failed disappears once you display the “Music&Video Channel” screen. You can manually download a program that you failed to download even if the shortcut icon disappears. zWhen download is interrupted, the partly downloaded program until the interruption can be saved. You can operate the FOMA terminal to resume downloading for the remaining data except during specific hours. zYou cannot re-download a program whose playback restrictions have expired. You cannot update until the next distribution date. zDuring certain hours of a day, you may not be able to download a program manually.

270Music&Video Channel/Music PlaybackMusic&Video Channel screen (p.268)Chapter list……Displays the list of title, artist and playback time of each chapter. Select a chapter to play it *1. “Chapter list”→p.270Move program……Select a folder, and move the program to the user-created folder of the Music&Video channel in the Data Box*2.Program info……Displays the program title, the play count, time limit, or period. Program image……Displays the images stored in the program*3.Connect to URL……Accesses the site using the Web To function if the URL is included in the program. Add shortcut →p.94Delete……Deletes a program. *1: You cannot select the chapter of which all of the data are not downloaded. *2: You can not move the partially downloaded program and the program corresponding to a synchronized play with a broadcasting wave. *3: When an animation GIF image is stored, the animation is played. You cannot save program images. ●Chapter listSelect “Chapter list” on the function menu of the Music&Video Channel screen to display the chapter list of the program. Chapter list screen (p.270)Chapter info……Displays the chapter title and the playback time. Chapter image……Displays the images stored in the chapter*.Connect to URL……Accesses the site using the Web To function if the URL is included in the program. * : When an animation GIF image is stored, the animation is played. If the program is made up of i-motion, the image is not displayed. Note that images stored in the chapters cannot be saved. Playing Program 1Music&Video Channel screen (p.268) Select the programThe “Music Player” screen appears and the music playback starts. “Guide to Music Player” screen→p.277“Operations on the Music Player” screen→p.278ＴＯＰ１−ＴＩＴＬＥＸＸＸＸＸＸＸＸＸ４：００ＴＯＰ２−ＴＩＴＬＥＸＸＸＸＸＴＯＰ３−ＴＩＴＬＥＸＸＸＸＸＴＯＰ４−ＴＩＴＬＥＸＸＸＸＸＴＯＰ５−ＴＩＴＬＥＸＸＸＸＸＴＯＰ６−ＴＩＴＬＥＸＸＸＸＸＴＯＰ７−ＴＩＴＬＥＸＸＸＸＸＴＯＰ８−ＴＩＴＬＥＸＸＸＸＸＴＯＰ９−ＴＩＴＬＥＸＸＸＸＸＴＯＰ１０−ＴＩＴＬＥＸＸＸＸＸＴＯＰ１１−ＴＩＴＬＥＸＸＸＸＸMUS I C CHANNEL TOP1１／２Chapter listArtistTitlePlayback timeFunction menup.270NzWhen earphones are connected, the sound comes only from the earphones regardless of the “Headset usage setting”. zWhen you select the program that you stop the playback last time, the playback starts from the beginning of the chapter where you stop the playback. zSome programs have playback restrictions. “ ” is displayed at the beginning of the title for the program with restrictions on the play count, period or time limit. The program restricted on the playback period cannot be played before or after the period. If the battery pack is removed from the FOMA terminal for a long period of time, the date and time settings stored on the FOMA terminal may be reset. In this case, the program restricted on the playback period or time limit cannot be played.

271Music&Video Channel/Music Playback●The program corresponding to a synchronized play with a broadcasting wave playbackWhen you play the program, you can play the same content with a broadcasting wave by accepting the synchronization that flows by the broadcasting wave. zThe program must be downloaded beforehand.zYou can play the program in the same way with a usual program, but it cannot be played before or after the playback period. Playing the program in the Data Box1i“DATA BOX”“Music&Video Channel”The “Folder list” screen appears. The Music&Video Channel folder→p.2242Select a folderThe “Program list (Preview)” screen appears. Guide to the program list screens→p.2713Select the programThe “Music Player” screen appears and the program playback starts. Guide to the Preview/List displayszThe icon for the Program list screen→p.269■Preview displayThe screen lists 6 movies and a preview image from the selected movie under the list.■List display11 programs are listed on the screen.Program list screen (p.271)Chapter list……Displays the list of title, artist and playback time of each chapter. Select a chapter to play it *1. “Chapter list”→p.270Edit title……Edits the program title. Move program*2……Select a folder, and move the program to the user-created folder.Move*3……Selects from “Move this/Move selected/Move all” and moves the program to the other folder you select. “About multiple-choice”→p.38Program info……Displays the program title, the play count, time limit, or period. Program image……Displays the images stored in the program. *4Sort……Sorts programs by the specified criteria. List setting……Specifies how to list the programs. Connect to URL……Accesses the site using the Web To function if the URL is included in the program. Memory info……Displays the amount of the stored program.Reset title……Resets the title to the default. Delete*2……Deletes a program. Delete*3……Selects the deleting method from “Delete this/Delete selected/Delete all”. “About multiple-choice”→p.38*1: You cannot select the chapter of which all of the data are not downloaded. *2: Available only with the program folder. *3: Available only with the user-created folder. *4: When an animation GIF image is stored, the animation is played. You cannot save program images. NzThe playback time is connected with the time setting by the auto time adjust function, so that the playback time cannot be changed even if you manually change the time and date on the FOMA terminal. zYou cannot play the partially downloaded program. Folder listFunction menup.253Program list (Preview) ○○ヒットチャート ○○ランキング ○○トップ１０ランキング○○ ○○Ｖｉｄｅｏチャートドコモチャネル１／２Ｆｏｌｄｅｒ1Function menup.271 ○○ヒットチャート ○○ランキング ○○トップ１０ランキング○○ ○○Ｖｉｄｅｏチャートドコモチャネル１／２ ○○ヒットチャート ○○ランキング ○○トップ１０ランキング○○ ○○Ｖｉｄｅｏチャートドコモチャネルドコモランキング ○○チャートＶｉｄｅｏ○○ ○○ランキングチャート○○１／２p (Disp SW)Ｆｏｌｄｅｒ1 Ｆｏｌｄｅｒ1Preview List

272Music&Video Channel/Music PlaybackDownloading and saving Chaku-Uta-Full® from a SitezYou can store up to 100 Chaku-Uta-Full® on the FOMA terminal (the actual number of data to be stored may be lower depending on the stored file size of various data). 1Sites screen (p.136)Select Chaku-Uta-Full®When data downloading is completed, the “Data acquisition” screen appears. ■To cancel downloadingt■To play the downloaded Chaku-Uta-Full®“Play”“Guide to Music Player” screen→p.277“Operations on the Music Player” screen→p.278■To display information about Chaku-Uta-Full®“Property”2“Save”“YES”■When only a part of the data can be savedWhen downloading is interrupted because of the signal condition or when the downloading is quitted, you may be able to save the downloaded portion only. In such a case, you can save only the downloaded portion. ■To cancel saving“NO”3Select a destination folder●Downloading the remaining data of partially downloaded Chaku-Uta-Full®When you select Chaku-Uta-Full® which is downloaded partially from the saved folder, a confirmation message about downloading the remaining data appears. Select “YES” to connect to the site and download the remaining data. When you download and save all data, the partially saved data are deleted. zIcons in the “Music list” screen indicates the data downloading status.→p.273zIf the playback period or limit of Chaku-Uta-Full® which is partially downloaded is expired, you cannot download the remaining data (except for Uta-hodai tracks). You can delete the partially saved data when downloading the data. ●Updating playback restrictions for Uta-hodai tracksWhen you play a playlist or folder contains Uta-hodai tracks whose playback restrictions have expired and can be updated, a message to require the update of the playback restrictions appears. Select “YES” to connect to the site and update the playback restrictions (packet communication charge apply). When you select “NO”, you cannot play the data. When there are two or more Uta-hodai tracks whose playback restrictions can be updated, select an online music distribution site you want to update. zUta-hodai is music data that is allowed to play while you subscribe to the service of a contents provider. The playback period is specified by the license information downloaded with the music data. Music data whose playback period has expired can be played back again by updating the license. The license information may include playback extension period in addition to the playback period. You can play the music data without updating the playback period during the playback extension period, but the data cannot be played after the playback extension period has elapsed. If you download a music data without updating the playback period, the music data cannot be played until it is saved. zThe packet communication charges for the update of the playback period during international roaming is not covered by Pake-Houdai or Pake-Houdai full. NzSome Chaku-Uta-Full® have the playback restrictions. “ ” is displayed at the beginning of the title for the Chaku-Uta-Full® with restrictions on the play count, period or time limit. The Chaku-Uta-Full® restricted on the playback period cannot be played before or after the period. zIf the battery pack is removed from the FOMA terminal for a long period of time, the date and time settings stored on the FOMA terminal may be reset. In this case, Chaku-Uta-Full® restricted on the playback period or time limit cannot be played.zYou cannot download Chaku-Uta-Full® which exceeds 5M bytes or whose size is unknown. ＣｏｏｌｔａｌｋＤａｔａａｃｑｕｉｓｉｔｉｏｎＰｌａｙＳａｖｅＰｒｏｐｅｒｔｙＢａｃｋData acquisitionzYou can save Chaku-Uta-Full® to the “Screen memo” using “Add screen memo” on the function menu of the data acquisition screen (p.272), then start playback from the screen memo. →p.143N

273Continued on next pageMusic&Video Channel/Music PlaybackzWhen you perform the operation overseas, the time limit may be expired before or after other than the displayed period. zIcons in the “Music list” screen indicates the status of the playback restrictions.→p.273zSince updating playback restrictions is performed while connecting a site, packet communication charges will apply. zIt is recommended to initialize your FOMA terminal when you exchange the FOMA card. Playing MusiczYou can store music in a playlist and play your favorite music in your favorite order. →p.2751i“DATA BOX”“Music”The “Folder list” screen appears. 2Select a folderThe “Music list” screen appears. “Guide to Music list”→p.273■To search music by i-mode“Search by i-mode” “YES”3Select a music fileThe “Music Player” screen appears and the music playback starts. “Guide to Music Player” screen→p.277“Operations on the Music Player” screen→p.278■Chaku-Uta-Full® that is downloaded partiallyA confirmation message about downloading the remaining data appears. Select “YES” to download the remaining data.→p.272Guide to Music list■File type icon : Music with the file restrictionNzWhen the Uta-hodai track which is set to the ring tone or alarm tone is disabled to be played, the default demo sound, ring tone or alarm tone is played. Folder listFunction menup.253Music listＭｙＦａｖｏｒｉｔｅＤｏＣｏＭｏｔｈｅｍｅ − ＤｏＣＴｒａｉｎ − ＤｏＣｏＭｏＫｅｉｔａｉＴｅｃｈｎｏ − ＤｏＣＣｏｏｌｔａｌｋ − ＤｏＣｏＭｏFunction menup.274NzWhen earphones are connected, the sound comes from the earphones even when manner mode is set. If you disconnect earphones when manner mode is set, the playback is paused. zSome music files have playback restrictions. “ ” is displayed at the beginning of the title for the music file with restrictions on the play count, period or time limit. The music files restricted on the playback period cannot be played before or after the period. Icon Description Music stored on the FOMA terminal (Phone) Music stored on the microSD card and can be moved to the FOMA terminal (Phone) Music stored on the microSD card and prohibited to be moved to the FOMA terminal (Phone) * Also displayed in the Playlist music list screen of the FOMA terminal (Phone) when the microSD card which contains the music file stored in the playlist is not inserted to the FOMA terminal. Music that cannot be played or music with playback restrictions which cannot be updatedWMA music Partially downloaded musicMusic to which the FOMA card security function appliedＭｙＦａｖｏｒｉｔｅＤｏＣｏＭｏｔｈｅｍｅ − ＤｏＣＴｒａｉｎ − ＤｏＣｏＭｏＫｅｉｔａｉＴｅｃｈｎｏ − ＤｏＣＣｏｏｌｔａｌｋ − ＤｏＣｏＭｏRetrieval method iconFile type iconTitle - ArtistAllowable operation icon

274Music&Video Channel/Music Playback: Music with playback restriction (“ ” turns to “ ” when the playback count, period or limit expires) Playback restrictions of music with the pale blue icon can be updated: Playable only when the FOMA card being used was also used to save the music: Playable only when the model and FOMA card being used were also used to save the music■Retrieval method icon■Allowable operation iconMusic list screen (p.273)zThe available functions and items listed in the function menu vary depending on the selected folder. The items are also different when searching or sorting. Add to playlist……Adds the music to the end of the playlist. Create playlist→p.275Move to microSD*1 →p.250Move……Selects from “Move this/Move selected/Move all” and moves the music to the other folder you select. “About multiple-choice” →p.38Edit information……Edits the title, artist name, album name, etc. Edit disp. title……Edits the title of music displayed on the music list screen. You can enter up to 9 double-byte or 18 single-byte characters. Reset info……Resets the information to the status when the “Music information” was retrieved. Select ring tone……Sets the music as a ring tone.→p.82Fullsong ring tone……Sets the whole music as a ring tone. Point ring tone……Selects the part of the song set as a ring tone using v. Search*1……Searches music in a selected criteria. Sort*1……Sorts programs by the specified criteria. List setting……Selects a music-list format from “List/List+image”. File property……Display a music file name, a file save date and whether the music can be moved to the microSD card. Lyric……Displays the lyric of the music. If the lyrics cannot be displayed on a single page, you can switch the page with v. Jacket image……Displays the jacket image of the music. If there are two or more images, use v to switch images. Memory info……Displays the amount of the stored music. Repeat settingOFF (default)……Does not repeat the playback. All repeat……Repeats the playback of all music in the folder. Single repeat……Repeats the playback of the music which is highlighted. Shuffle (default: OFF)……Sets ON/OFF of the shuffle playback. Connect to URL……Accesses the site using the Web To function if the URL is included in the music. Delete……Selects the deleting method from “Delete this/Delete selected/Delete all”. “About multiple-choice” →p.38Move to Phone*2→p.250*1: Unavailable in the music list screen of the movable contents folder or WMA folder. *2: Only available for the movable contents folder. Icon DescriptionNone Pre-installed musicMusic downloaded from a siteMusic downloaded from a PCIcon DescriptionMusic that can be set as a ring tone Music that can be moved to the microSD cardMusic that can use the Web To functionN<Move to microSD>zTo check whether a Chaku-Uta-Full® can be moved, select “File property” to see the music information. Some Chaku-Uta-Full® are movable only among the same model.

275Music&Video Channel/Music PlaybackUsing the PlaylistYou can store music in a playlist and play your favorite music in your favorite order. zThe number of tracks and playlists you can store on the FOMA terminal (Phone) are as follows: * : You can store up to 99 tracks for 1 playlist (except for a list of all tracks). zYou can store the music (Chaku-Uta-Full®) stored on the FOMA terminal (Phone), the music (Chaku-Uta-Full®) stored on the microSD card and WMA data in the same playlist. Creating a Playlist1Playlist list screen (p.275)/Music list screen (p.273)u (FUNC)“Create playlist”2Select a folderUse c to select □(checkbox)o (Finish)Multiple music can be stored to a playlist. ■Music list screenSelect “Set this”, “Set selected” or “Set all” instead of selecting a folder. “About multiple-choice”→p.38When selecting “Set all”, stores all music files in the music list screen to a playlist. 3Enter the playlist nameThe playlist is created and the “Playlist music list” screen appears. ■To start playbackd (Play)Playing a Playlist1Folder list screen (p.273)“Playlist”The “Playlist list” screen appears. ■To play the playlist immediatelyHighlight the playlist to playo (Play)2Select a playlistThe “Playlist music list” screen appears. ■When “All tracks (phone)” is selectedThe playlist which contains all music (playable music files) stored on the FOMA terminal (Phone) appears. 3d (Play)The playback of the playlist starts and the music are played in the stored order. Playlist list screen (p.275)Create playlist→p.275Edit playlist name……Edits the playlist name. You can enter up to 128 double-byte or 256 single-byte characters. Copy to playlist……Creates a copy of the playlist in the playlist list. Search……Searches music in a selected criteria. Playlist info……Displays the playlist name, number of tracks in the playlist and the playback time of the playlist. Delete playlist……Selects the deleting method from “Delete this/Delete selected/Delete all”. “About multiple-choice” →p.38Tracks Up to 100Playlists*Up to 21 (including a list of all tracks)NzWhen all music files stored on the playlist are deleted, the playlist is also deleted. Playlist listFunction menup.275Playlist music listＰｌａｙｌｉｓｔ１ＤｏＣｏＭｏｔｈｅｍｅ − ＤｏＣＴｒａｉｎ − ＤｏＣｏＭｏＫｅｉｔａｉＴｅｃｈｎｏ − ＤｏＣＣｏｏｌｔａｌｋ − ＤｏＣｏＭｏFunction menup.276

276Music&Video Channel/Music PlaybackPlaylist music list screen (p.275)Create playlist→p.275Edit playlistSort playlist……Selects the position to move to and rearranges the music. Add music……Selects the playlist to move to and add the music to the last of the other playlist. “About multiple-choice”→p.38Release settings……Selects from “Release this/Release selected/Release all” to release the music from the playlist. “About multiple-choice”→p.38Search……Searches music in a selected criteria. Sort……Sorts music in the playlist in a selected criteria. List setting……Select “List only” or “List w/ images”.File property……Music file name and file save date and time are displayed. Lyric……Displays the lyric of the music. If the lyrics cannot be displayed on a single page, you can switch the page with v. Jacket image……Displays the jacket image of the music. If there are two or more images, use v to switch images. Repeat settingOFF (default)……Does not repeat the playback. All repeat……Repeats the playback of all music in the playlist. Single repeat……Repeats the playback of the playing (paused) music. Shuffle (default: OFF)……Sets ON/OFF of the shuffle playback. Connect to URL……Access the site using the web to function if the URL is included in the music.Saving the WMA Data on the microSD Card“Windows Media Player” enables you to convert the music CD data to WMA data and save it on the microSD card. zThe data format, number of playlists and tracks that can be played on the FOMA terminal are as follows: * : Up to 999 music files can be stored on one playlist. zWindows Media Player 10/11Use Windows XP Service Pack 2 or a later version to use Windows Media Player 10/11. Use Windows Media Player 11 for Windows Vista. For how to operate the software, refer to Windows Media Player 10/11 help. zIf you do not have a microSD card, you can purchase one at your local electrical-appliance store. 1Prepare the following• PC which satisfies the operational environment for “Windows Media Player”• microSD card2USB mode setting screen (p.251) “MTP mode”When set to “MTP mode”, “ ” appears. 3Connect the FOMA terminal and a PC with the FOMA USB Cable with Charge Function 01/02“ ” appears when the microSD card is inserted and the FOMA USB Cable with Charge Function 01/02 is connected during the MTP mode. 4Launch “Windows Media Player” on the PC and convert the music data such as music CD data to WMA formatIt may take some time for “Windows Media Player” to recognize the FOMA terminal. 5Transfer WMA data stored on the PC to the microSD cardN<Edit playlist>zReleasing music from the playlist does not delete the original data. File format WMA9 (Windows Media Audio 9 Standard)Bit rate 32 to 192 kbpsDRM Windows Media DRM10 for Portable DevicesTracks Up to 999Playlists*Up to 100 (including a list of all tracks)

277Continued on next pageMusic&Video Channel/Music Playback6Disconnect the FOMA USB Cable with Charge Function 01/02 after the data transfer7Set the USB mode of the FOMA terminal back to “Communication mode”Using the Music Player<Music Player>Using the Music Player, you can play Chaku-Uta-Full®, i-motion, the Music&Video Channel program and music stored in the microSD card. zBesides the pre-installed Chaku-Uta-Full®, you can play the i-motion or Chaku-Uta-Full® downloaded from i-mode sites, the Music&Video channel program, or music data transferred from music CDs. “Downloading i-motion”→p.152“Downloading and saving Chaku-Uta-Full® from a Site”→p.272“Setting Up Program”→p.268“Saving the WMA Data on the microSD Card”→p.276zYou can enjoy the stereo sound by connecting the flat-plug stereo earphone set (optional). To connect a flat-plug stereo earphone set to the FOMA terminal, the Earphone Plug Adapter for External connector terminal is required. →p.25zWhen earphones are connected, the sound comes only from the earphones regardless of the “Headset usage setting”. ■BGM play (Background play)You can use mails or display i-mode sites while listening to music with the Music Player. →p.280Guide to Music Player screenzFunction menu for the Music Player screen→p.279zIf setting to play i-motion on the Full screen, i-motion is played on the landscape (full) screen.①Artist nameMusic: Artist nameMusic&Video Channel : Program titlei-motion : Creator②TitleMusic : TitleMusic&Video Channel : Chapter title and Artist namei-motion : Title③Image/MovieMusic : Jacket imageMusic&Video Channel : Chapter image or Program moviei-motion : Movie④Playback status : During playback : During pause : During fast forward : During rewind : Slow playback : Fast playback⑤Tra c kMusic : Playing track number/Total number of tracks in the folderMusic&Video Channel : Playing chapter number/Total number of chaptersi-motion : Playing file number/Total number of files in the folderNzYou can also use the Napster® application to save the music data. • You can download the Napster® application from the following webpage: http://www.napster.jp/• For detailed information on the Napster® application, visit the following webpage: http://www.napster.jp/support/zWMA data moved to the microSD card in another FOMA terminal may not be displayed/played on the FOMA SO706i. zWhen you use a microSD card to which WMA data has been transferred in another FOMA terminal, it may not be recognized by the PC even though you change to MTP mode. In this case, perform “Delete all” in the function menu for WMA folder list screen, or format the microSD card (p.251). Note that the all data is deleted when you format the microSD card. zWMA data cannot be set as the ring tone. ①③⑤④②⑩⑪⑥⑦⑧⑨⑫⑬⑭⑮

278Music&Video Channel/Music Playback⑥Sound quality (Equalizer) : OFF : Bass amplified : Treble amplified : Treble reduced : Suitable for each genre : Suitable for voice⑦Sound effects (SRS_WOW) : OFF : Bass adjusted (+1 to +3) : Surround : Bass adjusted (+1 to +3)/Surround : User setting 1 to 3⑧Repeat : OFF : All repeat : Single repeat⑨Shuffle : OFF : ON⑩Playback position displayDisplays the marker in the playback position display (moving the marker with v and pressing d (Play) during pause starts playback from the position). ⑪Elapsed time (minutes: seconds)/Total playback time (minutes: seconds)⑫Volume (Level 0 to Level 20)Displays in the Manner mode⑬Select the music/file/chapterChange the music/file/chapter to play⑭Web To function availableAccesses the URL included in the music or program. ⑮Setting menu→p.279Operations on the Music Player screenzThe following operations may not work depending on the type of music, the program of Music&Video Channel and i-motion. * : Plays the previous or next music regardless of the order in the folder or playlist during shuffle playback. Key operation OperationdPauses/Resumes playbackcAdjusting the volumehPlay from the beginningPlays the previous music/chapter/movie when pressed within 1 second from the beginning of the music*jPlay the next music/chapter/movie*h (1 second or longer)Rewindj (1 second or longer)Fast forwardv during pause Moves the marker in the playback position displayp6Select the music/file/chapter to playqwSwitches the image when multiple images are storedtEndsoUses the setting menus→p.2791Sets the Equalizer2Sets the SRS_WOW3Sets the Repeat4ON/OFF for Shuffle5Connect to URL9Switch the screen mode between Normal and Full screenNzThe volume can be selected between Level 0 and Level 20 (default: Level 10), and the setting is retained next time the i-motion is played. zThe volume set for Music Player does not affect the ring volumes set in “Ring volume”. zOn the Music&Video Channel program, if some playback operations are restricted, the operations are not available (operation with v, mainly). zRewind and Fast forward is unavailable depending on the data.

279Continued on next pageMusic&Video Channel/Music Playback●Using the setting menus1During Play/Pause/Stopo (MENU)The cursor moves to the setting menu. “Guide to Music Player” screen→p.2772Use v to select the function , then d (Select)You can also set the function using 1 to 6. →p.278Press t to return to the play/pause/stop. ●When a flat-plug stereo earphone set, etc. is connectedYou can use the switch to perform the following operations: Music Player screen (p.273)zThere is some unavailable functions depending on the type of music, the program of Music&Video Channel and i-motion. Action settingSound effect……Sets the sound quality and effect. Equalizer (default: OFF)……Sets the sound quality.SRS_WOW (default: OFF)……Adds sound effects (i-motion with sound effect can set→p.226). ■To select the user settingHighlight the user setting 1 to 3o (Detail)Set with bd (Set)Repeat settingOFF……The FOMA terminal does not repeat the playback. All repeat……Repeats the playback of all music in the folder. Single repeat……Repeats the playback of the playing (paused) music. Shuffle……Turns the shuffle playback ON/OFF. Screen setting……Sets how to display the player screen. Normal screen mode……Plays on the portrait screen. Full screen mode……Plays on the landscape screen (Full screen). Change skin……Sets the design of the Music Player screen. Set image disp.……Sets the display size of images in the normal screen mode. Normal……Displays the image in the actual size. Fit in display……Displays the image fit in the screen regardless of the image size. Set repeat play……Specifies whether to play files continuously in the folder.Play menuFast……Plays fast. Press o (Play) to return to normal playback. Slow……Plays slowly. Press o (Play) to return to normal playback. Position to play……Specifies the part of the music moving the marker in the playback position display with v and plays only the part of the music. This function is not available depending on the music. Chapter list……Displays the chapter list (p.270). Select a chapter to play it. Detail InfoFile property……Displays a music file name, a file save date and whether the music can be moved to the microSD card. i-motion info……Displays an i-motion file name, a file save date and whether the i-motion can be moved to the microSD card. Chapter info……Displays the chapter title and the playback time. Lyric……Displays the lyric of the music. If the lyrics cannot be displayed on a single page, you can switch the page with v. Jacket image……Switches the jacket image of the playing music using v. Chapter image……Displays the images/animations stored in the played chapter. Image……Displayed only on i-motion, but displayed in gray and not available. Switch operation OperationOnce Play/Pause each time you press the switchTwice in a row during playbackPlay the next music/chapterThree times in a row during playbackPlay from the beginningPlays the previous music/chapter when pressed within 3 second from the beginning of the music. 1 second or longer during playbackQuits the Music Player

280Music&Video Channel/Music PlaybackConnect to URL……Accesses the site using the Web To function if the URL is included. Change music……Changes the track to play. Select file……Changes the file to play. Chapter list……Changes the chapter to play. Help……Displays a description of an operation assigned to a key. Using Other Functions During Music Playback<Switch to BGM>You can play the music and Music&Video Channel program while using other functions. zWhen you connect the flat-plug stereo earphone set (optional) or the flat-plug earphone/microphone with switch (optional), etc. to the FOMA terminal, use the Earphone Plug Adapter for External connector terminal. →p.25zYou cannot use the BGM in the Music&Video Channel programs of i-motion. 1Music Player screen (p.277)y “Switch to BGM”The standby screen appears and you can use other functions. ■To quit the Music Player“Quit music”/“Quit Music&Video ch”■ To quit the BGM playChange a task to the music group, and stop the Music Player. →p.283●Functions available during BGM play○: Available △: Partially available ×: Unavailable*1: When “Receiving setting” of mail is set to “Alarm preferred”, the music playback pauses when receiving a mail (even when set to “Operation preferred”, the music playback pauses when receiving a mail while the standby screen is displayed). When composing i-mode mail, some functions such as “Activate camera” are not available.*2: Activating i-αppli pauses playback.●Playing when the FOMA terminal is foldedThe side key enables you to operate the Music Player with the FOMA terminal folded.zMusic tracks and Music&Video Channel programs can be played with the FOMA terminal folded. However, only music tracks can activate with the FOMA terminal folded.N<Chapter image>zImages stored in the chapters cannot be saved. Function AvailabilityVoice/Videophone Calls ×Mail ○*1i-mode ○i-αppli △*2Data Box △LifeKit △Phonebook ○Own data ○Settings △Service △Osaifu-Keitai/ToruCa ○Key operation Operationa (▲マナー )s (▼MUSIC)■During playback or pauseAdjusting the volumea (▲マナー ) (1 second or longer)■During playback or pausePlay from the beginningPlays the previous music/chapter when pressed continuously s (▼MUSIC) (1 second or longer)■During playback or pausePlay the next music/chapter■While the Music Player is not active (the standby screen is displayed)Activates the Music Player and plays the music stopped at the last playback■During the BGM play (on the standby screen)Quits the Music PlayerNzYou cannot activate the Music Player by s ( ▼MUSIC) during Manner mode (however, it is possible when earphones, etc. are connected). zWhen the battery is low, the Music Player with s (▼MUSIC) is not activated.

281Convenient FunctionsMulti Access.................................................................................................. 282Multitask............................................................................................................. 283Assigning a Function to the FUNC Key ............................................ 284Sorting the Main Menu ................................................................................................... 284Using the Alarm Function ...................................................................................... 284Managing Schedule.......................................................................................... 285Adding To Do List Entries ................................................................................. 288Setting the Alarm Mode ............................................................................... 289Storing Your Own Name and Image ................................................................ 290Recording Your and the Other Party’s Voice................................................. 292Recording and Playing Alarm Tones and On Hold Tones ........................ 293Checking Call Times and Charges .................................................................... 293Setting the Upper Limit of Charge to Notify the Alarm..................... 294Using the FOMA Terminal as Calculator.......................................................... 295Composing Text Memo ................................................................................... 296Using Dictionaries............................................................................................ 296Using Conversation Help Useful Overseas........................................................ 298Using an Earphone/Microphone with Switch ................... 298Resetting the Function Settings................................................................. 299Resetting to the Default Settings of the FOMA Terminal .................................... 300Multi accessMultitaskHolding down ch-keyAlarmScheduleTo D o li s tAlarm settingMy ProfileVoice memoVoice announceCall dataNotice designate callsCalculatorText m e m oDictionaryTa l k M a nEarphone/microphone with switchReset settingsInitialize

282Convenient FunctionsMulti Access<Multi access>Multi access is a function that allows the 3 communication lines such as voice calls, packet communication and SMS to be conducted at the same time. “Multi Access Combination Patterns”→p.360zThe FOMA terminal can use the 3 communication lines listed below at a time. When you receive a call during communication●Receiving an i-mode mail during a voice callWhen you receive an i-mode mail during a voice call, the in-call screen remains displayed while receiving the i-mode mail. You can then read the i-mode mail without interrupting your call. 1i (MULTI)Select “ (Transmission)”The reception result screen for the i-mode mail appears. Switching tasks→p.2832Checking the i-mode mailReading i-mode mail→p.1703i (MULTI)Select “ (Talking)”The screen changes to the voice call screen. ●Receiving a voice call during i-mode or packet communicationWhen you receive a voice call while using i-mode, receiving or sending an i-mode mail or using packet communication with the FOMA terminal and PC connected, the voice call ringing screen appears and you can answer the call without ending i-mode or packet communication.<Example: When a voice call arrives during i-mode>1rThe In-call screen appears, and you can talk. ■To return to the i-mode screen without answering the voice calli (MULTI)Select “ (Browser)”The caller hears ringing without a message. 2To end the call, press yThe call is ended and the i-mode screen reappears. ■To return to the i-mode screen without ending a voice calli (MULTI)Select “ (Browser)”To use other type of communication while communicatingYou can use another type of communication without interrupting your current communications. zTo switch screens during Multi access, select the desired function on the task icon display area.→p.283●Making a voice call during i-modeWhile connecting to i-mode or sending/receiving a mail, you can make a voice call without ending i-mode. 1During i-modei (MULTI) (1 second or longer)The standby screen appears. 2Make a voice callMaking voice calls→p.483To end the call, press yThe call is ended and the i-mode screen reappears. ■To return to the i-mode screen without ending a voice calli (MULTI)Select “ (Browser)”Voice call 1 linePacket communication connected with i-mode, i-αppli, i-mode mail and PC1 lineSMS 1 lineNzCommunication charges are applied for each of the lines used during Multi access communication.

283Convenient FunctionsMultitask<Multitask>Multitask enables you to use multiple functions at the same time. Up to 3 functions can be performed at once, one from each of the Main menu groups shown below (excluding 1Seg/Music group).* : Multitask Combination Patterns→p.361zThe icon of the running task is displayed on the task icon display area during Multitask. When multiple tasks are active, you can change tasks using this icon.zWhile receiving a Music&Video Channel program , 1 function enters the operated mode and the task icon “ ” appears. zThe voice call charge continues to increase while you are concurrently using another function during a voice call. Activating tasks (functions)You can activate new task (function) without finishing the current tasks. 1While using a taski (MULTI)The “Task change” screen (p.283) appears. 2i (MENU)Select new task■To access the Mail menuu (MAIL)■To access the i-mode menuo (i-mode)■To access the channel listp (ch)■To call a function assigned to p→p.284p (ch) (1 second or longer)Operations of the task change screenWhen you are running multiple tasks, you can switch them to change an active task or finish all tasks at the same time.1While using multiple taski (MULTI)The “Task change” screen appears. ■To switch the taskSelect the task icon to change■To display the Main Menui (MENU)■To Display the stand-by screenrThe “Task changing” screen appears again when you press i during the standby screen is displayed. * You can display the standby screen without displaying the Task change screen by pressing i (1 second or longer) during the task is activated. ■To end tasksy “Quit selected” or “Quit all function”Group Main menu item (task)Mail group Maili-mode group i-modei-αppli group i-αppliSettings group Settings, ServiceTool group Data Box, LifeKit, Phonebook, Own data1Seg/Music group MUSIC, 1SegNzSome functions are activated as one of another group.zIn the following cases, 1 task is added to compose a mail while viewing another mail. • Accessing the Mail menu to compose a mail• Accessing the Mail menu to compose SMS• Using Template to create a Deco-mail®• Using Reply/Reply with quote/Forward for a received mail• Editing a sent mail• Editing a draft mailNOperation guidanceSelect these icons to change the task.Task change

284Convenient FunctionsAssigning a Function to the FUNC Key<Holding down ch-key>Change functions to call by pressing and holding p while the standby screen or task change screen is displayed.zCamera, Schedule, Music Player, Music&Video Channel and 1Seg can be assigned.1i“SETTINGS”“Other settings”“Holding down ch-key”■To reset to defaultu (FUNC)“Reset ch-key”2Select a function to assign“YES”Sorting the Main MenuYou can sort the menu that can be customized by yourself. You can also place the sub item. <To sort the first hierarchy menu>1While the menu you can sort is displayedHighlight the place to be newly allocatedu (FUNC)“Manual-sort”Select the menu2“Replace”“OK”■Selecting the sub item“Select sub item”Select the menu “Replace”“OK”The menus are changed. Using the Alarm Function<Alarm>zYou can store up to 10 alarms. 1i“LIFEKIT”“Alarm”The “Alarm list” screen appears. ■To switch ON/OFF with the last settingsHighlight the setting item p (ON/OFF)“ON/OFF” switches each time you press p.■To check the previous settingsSelect the setting itemThe “Alarm detail” screen appears.2Highlight the item to seto (Edit)3Select any item: Edit title……Enters the title of the alarm. You can enter up to 6 double-byte or 12 single-byte characters. Time setting……Enters the time at which the alarm will sound. Repeat……Selects the alarm repetitions from “1 time/Daily ( )/Select day ( )”. Alarm tone……Selects the alarm tone from clock alarm tone or folders of melody, i-motion, music, etc. Volume……Sets the alarm tone volume with c. Snooze setting……Specifies whether a snooze (repeating) alarm is set or not. ON……Enter the number of times for ringing (01 to 10 times) and the ringing interval (01 to 10 minutes). The alarm tone (about 1 minute) rings repeatedly for the set number of times in the set interval. OFF……Enter the ringing time (01 to 10 minutes). Sounds the alarm tone continuously for the specified time. Auto power ON……Specifies whether the FOMA terminal is automatically turned on or not when the time for an alarm is reached. 4Set the respective itemso (Finish)Alarm listFunction menup.285NzWhen the FOMA terminal is automatically turned on to notify you of an alarm, if you set a melody, i-motion or music downloaded from sites as alarm tone, the “Clock Alarm Tone” is played. zBefore entering an area such as an aircraft or hospital where there is electronic equipment that uses extremely precise control systems or very low signal levels and the use of mobile phones is prohibited, set the “Auto power ON” setting to “OFF” and then turn the FOMA terminal off. Alarm detail

285Continued on next pageConvenient FunctionsAlarm list screen (p.284)/Alarm detail screen (p.284)Edit……Edits the alarm. Display detail*……Displays the alarm contents. Set this……Activates the alarm. Release this……Disables one alarm. Release all……Disables all set alarms. * : Available only with the Alarm list screen. Managing Schedule<Schedule>If you add an event to your schedule, an alarm tone sounds at the specified date and time and the FOMA terminal displays an animation and message notifying you of the details stored for the event. You can also add holidays and anniversaries. Stored scheduled events and holidays can be quickly checked on the FOMA terminal’s calendar. You can switch the calendar display mode between 1-month and 1-week to view the number or details of scheduled or To Do list events for a given day. zThe FOMA terminal supports from January 1, 2004 to December 31, 2037. Adding schedule entriesYou can organize your schedule in variety of ways, such as storing regularly scheduled events such as weekly meetings on a set day every week or setting alarm tones and animations that match the scheduled event. zUp to 500 entries can be stored. You can also store multiple scheduled events for a day. zSchedule alarms →p.2891i“LIFEKIT”“Schedule”The “Schedule” screen appears. 2o (New) “Schedule”3Select any item: Edit schedule……Enters the scheduled event details and selects an icon. You can enter up to 256 double-byte or 512 single-byte characters. The entered details are displayed during alarm notification.Date setting……Sets the start/end date and time for the scheduled event. Repeat……Selects the schedule repetitions from “1 time/Daily ( )/Select day ( )”. Alarm……Specifies the alarm notification settings used when the due date is reached from “ON/ON/Set time (01 to 99 minutes) /OFF”. Alarm tone……Selects the alarm tone from clock alarm tone or folders of melody, i-motion, music, etc. Edit summary……Enters the summary of the scheduled event. You can enter up to 20 double-byte or 40 single-byte characters. The entered summary appears on the screen during alarm notification. 4Set the respective itemso (Finish)Schedule screen (p.285)New……“Adding schedule entries”→p.285“Adding holidays and anniversaries”→p.286Weekly display ⇔Monthly display →p.286Icon display……Selects an icon and displays scheduled event, holiday or anniversary by icon. Repeating scheduled events ( or ) are displayed as a single item. User icon setting→p.286Switch To Do list……Switches to the To Do list screen (p.288).No. of schedules……Displays the number of stored schedule entries, holidays and anniversaries. In Secret mode/Secret data only mode, you can also check the number of records kept as the secret data. ScheduleFunction menup.285NzWhen set to “ON/Set time”, the alarm notification is given only at the specified date and time before the scheduled event. The alarm notification is not given at the date and time set for the scheduled event. zScheduled events can be stored to notify the alarm at the same date and time only with the setting combination of “Daily”/“Select day” and “1 time” (no repeats). In this case, the scheduled event with the “1 time” setting has priority. zIf the day of the week set as the starting time and the day of the week set in the Repeat setting are different, the day set in the Repeat setting has priority and the scheduled event is added on the first specified day after the starting time.

286Convenient FunctionsiC trans. all→p.260Send all Ir data→p.258Reset holiday……Resets the national public holidays to default. Delete……Selects the deleting method from “Delete selected/Delete all/Delete past”. “About multiple-choice” →p.38• When “Delete past” is selected, all the entries before the data with the cursor on the schedule screen are deleted. • When “Delete all/Delete past” is selected, select the item from “Schedule/Holiday/Anniversary/All”. ●Changing the Schedule display modeThe Schedule can be displayed either as “Monthly display” or “Weekly display”. By pressing b to highlight a particular date, you can check icons and the number of scheduled events and To Do list stored for the selected date. zIn Monthly display, press a (▲マナー )/s (▼メモ) to switch months.Blue dates: SaturdaysRed dates: Sundays, public holidays and holidaysPink dates: Anniversaries＿: Today□: Scheduled event stored for the morning■: Scheduled event stored for the afternoonT: Stored To Do listAdding holidays and anniversarieszYou can store up to 100 holidays and anniversaries. The national public holidays stored on the FOMA terminal at the time of purchase are not included in this number. zYou can store only 1 holiday or anniversary per day. <Example: To add a holiday>1Schedule screen (p.285)o (New) “Holiday”■To add an anniversary“Anniversary”2Select any item: Date setting……Enters the date of the added holiday or anniversary. Repeat……Selects the holiday or anniversary repetitions from “1 time/Annually ( )”. Edit holiday・Edit anniversary……Enters the details of the holiday or anniversary. You can enter up to 10 double-byte or 20 single-byte characters. 3Set the respective itemso (Finish)Setting your favorite image as your user iconYou can set an image or animation stored in My picture as a user icon. Icons set as user icons are displayed as “ ” to “ ” in the icon selection display. When you set a user icon, the selected image or animation is displayed when the alarm notification is given. zYou can store up to 5 user icons. 1Schedule screen (p.285)u (FUNC)  “User icon setting”Select an item to store or change■To clear all the user icon settings“Release all”“YES”2Select a folder■To release the icon“Release this”“YES”To release the icon which is not stored in the schedule, “YES” is not available. 3Select an imageThe selected image is previewed, then the screen returns to the user icon list after a while.NzSelecting “Holiday” or “All” of “Delete all” resets the holidays to the default settings. The public holidays are set in accordance with the「国民の祝日に関する法律」（昭和23年法律第178号）及びその改正法（平成 17年法律第 43 号までのもの）(“The Public Holiday Law” (Law No. 178, 1948)) and the revised laws (up to Law No. 43, 2005). The Spring and Autumnal Equinox Days are determined by the government on February 1st in the previous year and may differ (as of May, 2008). Displays the date, day of the week, icon, time and the set contents.p (Disp SW)

287Convenient FunctionsChecking scheduled event, holiday or anniversaryYou can check scheduled event, holiday or anniversary. 1Schedule screen (p.285)Select the date on which the scheduled event, holiday or anniversary is storedThe “Schedule list” screen appears. In the list display, the stored contents and the settings are described with the following icons. : Scheduled event (Scheduled event icon is displayed): Holiday: Anniversary: To Do list: Alarm: Daily repeating event: Weekly repeating event on a specified day of the week: Annual repeating event: Scheduled event over a day (0:00 to 23:59)2Select an itemSchedule list screen (p.287)/ Schedule/Holiday/Anniversary detail screen (p.287)New……“Adding schedule entries”→p.285“Adding holidays and anniversaries”→p.286Edit……Edits the scheduled event, holiday or anniversary. Copy……Copies scheduled event, holiday or anniversary. When the copied entry has a repeat setting, the repeat setting is released when the entry is pasted. Icon display……Selects an icon and displays scheduled event, holiday or anniversary by icon. Repeating scheduled events ( or ) are displayed as a single item. User icon setting→p.286Switch To Do list……Switches to the To Do list screen (p.288). Release secret*1……Changes the data stored in the Secret mode/Secret data only mode to the normal data.→p.103Compose message*1*2 →p.156Attach to mail*1*2……Composes an i-mode mail with the schedule attached.Add shortcut→p.94iC transmission*1→p.259Send Ir data*1 →p.258iC trans. all→p.260Send all Ir data→p.258Copy to microSD*1 →p.248Delete……Selects the deleting method from “Delete this/Delete selected/Delete all/Delete past”. “About multiple-choice”→p.38• When “Delete past” is selected, all the entries before the displayed data are deleted. • When “Delete all/Delete past” is selected, select the item from “Schedule/Holiday/Anniversary/All”. *1: Only available for Schedule*2: Unavailable when 2in1 is set to B modeSchedule listFunction menup.287Schedule detail screenSchedule detail Holiday detail Anniversary detailFunction menup.287

288Convenient FunctionsAdding To Do List Entries<To Do list>You can manage your schedule by adding events to To Do list. You can also set alarms for events. zYou can set from January 1, 2004 to December 31, 2037. Adding/editing entrieszUp to 100 entries can be stored. zYou must enter “Contents”. You cannot store an To Do list entry with no “Contents”. zTo Do list alarms→p.289<Example: To add an entry>1i“LIFEKIT”“To Do list”The “To Do list” screen appears. 2u (FUNC)“New”■To edit an entryu (FUNC)“Edit”Function key o displays (New) when no entry is stored and (Edit) when any is stored. 3Select any item: Edit To Do list……Enters the contents for the entry. You can enter up to 100 double-byte or 200 single-byte characters. Due date……Sets the due date for an entry. Enter date……Enters the date and time. Choose date……Selects a date from the calendar, then enters the time. No date……No due date is set. Priority……Selects the priority for the entry from “ / /None”. Category……Selects a category of the entry from “None/Personal/Holiday/Travel/Business/Meeting”. Alarm……Specifies the alarm notification settings used when the due date is reached from “ON/ON/Set time (01 to 99 min.) /OFF”. Alarm tone……Selects the alarm tone from clock alarm tone or folders of melody, i-motion, music, etc. Completion date*……Sets the completion date for an entry. Enter date……Enters the date. Choose date……Selects a date from the calendar. No date……No completion date is set. * : Available only when an existing stored entry with a “Status” of “Completion” is edited. 4Set the respective itemso (Finish)To Do list screen (p.288) /To Do list detail screen (p.289)New・Edit→p.288Switch schedule……Switches to the schedule screen (p.285). Change status……Selects an entry status from “Plan/Acceptance/Request/Provisional plan/Confirmation/Denial/Completion/Substitution”. When you select “Completion”, set the completion date. Category display*1……Selects entries from “All/None/Personal/Holiday/Travel/Business/Meeting”, and displays them by category. Sort/Filter*1……Sorts entries in a specified order or displays only the specified events with the filter function. Add shortcut*1 →p.94Attach to mail*2……Composes an i-mode mail with the entry attached.iC transmission→p.259Send Ir data→p.258iC trans. all*1→p.260Send all Ir data*1→p.258Copy to microSD→p.248Delete……Selects the deleting method from “Delete this/Delete selected*1/Delete completed*1/Delete all*1”. “About multiple-choice” →p.38• When “Delete Completed” is selected, all the completed entries are deleted. *1: Available only for the To Do list screen*2: Unavailable when 2in1 is set to B modeTo Do listFunction menup.288NzWhen set to “ON/Set time”, the alarm notification is given only at the set time before the To Do list event (01 to 99 minutes in advance). The alarm notification is not given at the date and time set for the To Do list event.

289Continued on next pageConvenient FunctionsChecking entries1To Do list screen (p.288)Select an entryThe “To Do list detail” screen appears. Setting the Alarm Mode<Alarm setting>You can select either “Operation preferred” or “Alarm preferred” as the alarm notification setting for “Alarm”, “Schedule”, “To Do list” or “1Seg booking program”.z1Seg timer recording alarm works according to “Priority” set at the time of setting timer recording.1i“SETTINGS”“Clock”“Alarm setting”“Operation preferred” or “Alarm preferred”When set to “Operation preferred”, the alarm is given only when the standby screen is displayed. When set to “Alarm preferred”, the alarm is given even when operating the FOMA terminal or during talking. Alarm notification actions●When you set an alarmAfter setting the alarm notification in “Alarm”, “Schedule”, “To Do list”, “1Seg booking program” and “1Seg timer recording” the icon appears on the standby screen. ■Icon display on the standby screen“ ” appears and turns to “ ” on the specified day.●When the specified time is reachedAlarm for each function is given as shown in the Table 1 (p.290).zWhen you set i-motion to the alarm, the FOMA terminal notifies the alarm with the movie and the voice (the animation during the alarm notification may be changed depending on the icons and categories you set).●To stop the alarm tone■AlarmWhen the Snooze setting is set to “OFF”Pressing any key stops the alarm tone and the animation/i-motion. Pressing any key again emits the release tone “pipip” and the display disappears. When the Snooze setting is set to “ON”Pressing any key stops the alarm tone and the animation/i-motion, an alarm message “Snooze...” appears, then the alarm is notified again in the set ringing interval (minutes). Pressing y while “Snooze...” appears emits the release tone “pipip” and the snooze is canceled. To Do listShows the priority.Shows the entry status. The blue icon turns into red when the specified day has elapsed.To Do list detailFunction menup.288Function menup.288NzThe volume of the “Schedule” and “To Do list” alarms is determined by the “Phone” setting in “Ring volume”. zThe volume for the Clock Alarm Tone during a call is same as “Volume” setting level.zThe alarm tone during a call is not played in Snooze even when the Snooze setting is set to “ON”. zEven if an i-motion is set in the “Alarm tone” setting, the alarm is notified with the Clock Alarm tone and the animation for the specified icon and category when i-motion cannot be activated such as during a call. zIllumination alarm works according to “Schedule/Alarm” under “Illumination set” for “Alarm”, “Schedule”, “1Seg booking program” and “1Seg timer recording”, and “To Do” under “Illumination set” for “To Do list”.<Alarm notification priority sequence>zIf “Alarm”, “Schedule”, “To Do list”, “1Seg booking program” and “1Seg timer recording” alarms are set at the same time, alarm priority is assigned as follows: ①Alarm ②1Seg timer recording ③To Do list ④Schedule ⑤1Seg booking programIf alarm notification is failed, the “ (Missed alarm)” or “ (Missed program)” shortcut icon appears on the standby screen.→ p.290

293Continued on next pageConvenient FunctionsRecording and Playing Alarm Tones and On Hold Tones<Voice announce>You can record the voice and set it as original ring tone or answer message. zYou can make 2 voice recordings: “Voice announce 1” and “Voice announce 2”. zYou can record voice up to about 15 seconds. z“★” appears in the “Voice announce” screen when “Voice announce” is recorded. zVoice recordings made using this function can be set in the following functions: • Ring tone (voice call, videophone call, mail, MessageR/F, Call setting w/o ID, Multi Number, Number B of 2in1)• Alarm tone (Alarm, Schedule, To Do list, Clock Alarm Tone, 1Seg booking program, Notice designate calls)• On hold tone• Answer message (Record message)Recording voice1i“LIFEKIT”“Voice announce” Select an item“YES”Record the voiceSpeak into the mouthpiece. The FOMA terminal beeps 5 seconds before the recording time (about 15 seconds) ends. When recording ends, the FOMA terminal gives a short double-beep and the “Recording” screen returns to the previous screen. ■To stop recording in progressd (Stop)Playing voice announce recordings1i“LIFEKIT”“Voice announce” Select an item■To stop playback in progressd (Stop)Voice announce screen (p.293)Record……Records voice. Play……Plays the recorded voice. Erase……Erases the recorded voice. Checking Call Times and Charges<Call data>You can check the previous or total call time/charge for voice/videophone calls, etc. zThe following items can be checked. * : “Digital (AV)” for videophone calls and “Digital (UD)” for 64K data communication are displayed. zWhen you switch between voice call and videophone call, the total call time of voice and videophone calls is displayed in the last duration area, and the charges of voice and videophone calls are displayed separately in the last charge area. The displayed charge may differ from the actual charge. zThe call time is displayed for both voice calls and digital calls and communication (videophone calls and 64K data communication). Times for both calls made and received calls are counted. zCharges are only displayed for dialed calls. However, if you call at toll free number such as directory assistance (104), “￥0” or “￥∗∗” is displayed.zAs charges are accumulated on the FOMA card (UIM), the accumulated charge (starting from December 2004) is displayed on the Charge line when you change your FOMA card (UIM). * Charges are accumulated on FOMA cards (UIM) in FOMA terminals released before the 901i series, but they cannot be displayed. zYou can reset displayed call times and charges. NzWhen you receive a call, the “Alarm”, “Schedule”, “To Do list”, “1Seg booking program” or “1Seg timer recording” alarm is notified or operate other function while recording a voice, the recording stops. Voice announceFunction menup.293Item Displayed contentsLast call durationDisplays the duration of the last callLast call cost Displays the charge for the last call (voice calls, videophone calls and 64K data communication) *Total calls durationDisplays the total duration of all the calls made since the last reset (voice calls, videophone calls and 64K data communication) *Total calls costDisplays the total calls cost of all the calls made since the last reset (voice calls, videophone calls and 64K data communication)Total duration resetDisplays the date and time of the last call resetTotal cost resetDisplays the date and time of the last charge reset

294Convenient FunctionszDisplayed call times and charges may differ from the actual figures. Consumption tax is not included in the call charges. zIf you have subscribed to the 2in1, the total amount of Number A/B appears as the Total calls duration and Total calls cost. 1i“SETTINGS”“Call time/Charge” “Call data”Resetting the total call time and total call charges<Reset total>You can reset the Total calls duration or Total calls charge displayed in the “Call data” to zero. 1i“SETTINGS”“Call time/Charge”“Reset total”Enter your security codeSelect any item: Reset total duration……Resets the accumulated duration. Reset total cost……Enters PIN2 code and resets the accumulated charge. PIN2 code→p.100Resetting charges automatically<Auto reset total cost>You can set the FOMA terminal to reset the Total calls cost displayed in “Call data” to zero automatically on the 1st day every month, at 0:00. 1i“SETTINGS”“Call time/Charge”“Auto reset total cost”Enter your security code2“Auto reset”“ON”Enter PIN2 codePIN2 code →p.100■Not to set Auto reset“OFF”Setting the Upper Limit of Charge to Notify the Alarm<Notice designate calls>When accumulated charge displayed at “Call data” exceeds the cost limit set in this function, you are notified on the standby screen or with alarms. zThe alarm notification works only once when the accumulated charge exceeds the set cost limit. zExceeding the limit does not prevent you from making a call. 1i“SETTINGS”“Call time/Charge” “Notice designate calls”Enter your security code2Select any item: Cost limit setting……Sets the cost limit between 10 and 100,000 by 10 units. Notify settingNotify cost limit……Specifies whether to notify the cost limit. Alarm tone……Selects an alarm tone. Vol ume……Sets the alarm tone volume with c. NzIf the last or total voice or digital calls duration exceeds “199h59m59s”, the call count returns to “0s”. zThe time and charge of i-mode or packet communication, and the charge of sending Chaku-moji are not counted. To check i-mode communication charges, see the “Mobile Phone User’s Guide [i-mode] FOMA version”. zThe time taken to pick up a call, or for the other party to pick up a call, and the time for switching a voice call and a videophone call are not counted. zWhen the FOMA terminal is turned off, the duration and charge for the last call reverts to “0s” and “￥∗∗” respectively. zTurning the FOMA terminal off does not affect the total duration and charge. zThe international call charge for WORLD CALL is counted. For other international call services, the charge is not counted. NzSetting Auto reset total cost to “ON” and changing the month in “Set main time” resets the Total calls cost. zThe Auto reset total cost is reset to “OFF” when: • The FOMA terminal is turned on without the FOMA card (UIM) inserted•t is pressed on the PIN2 code input screen which appears when the FOMA terminal is turned on• The PIN2 code is locked→p.100• An error occurs on the FOMA card (UIM)

295Convenient Functions3Set the respective itemso (Finish)●Alarm notification actionsAfter ending a call, the function notifies you with the following methods when accumulated charges exceed the cost limit. ■When Notify cost limit is set to “ON” and alarm tone is set to other than “OFF”When the accumulated charge exceeds the preset cost limit, the alarm tone sounds for about 5 minutes starting 3 seconds after finishing the call, and the notification screen appears. To stop the alarm tone, press any key. After the notification, pressing t or y displays “ ” (Notice designate calls) shortcut icon on the standby screen. ■When Notify cost limit is set to “ON” and alarm tone is set to “OFF”When the accumulated charge exceeds the preset cost limit, “ ” (Call billing) shortcut icon appears on the standby screen. ●Checking details of “ ” (Notice designate calls)The details of Notify cost limit is displayed by selecting “ (Notice designate calls)” shortcut icon on the standby screen. 1On the standby screendSelect “ (Notice designate calls)”Enter your security codeThe details of “Notice designate calls” are displayed. 2Check the detailsd (OK)The standby screen reappears and “ ” (Notice designate calls) disappears. Using the FOMA Terminal as Calculator<Calculator>You can use the FOMA terminal to perform 4 different types of arithmetical calculations (addition, subtraction, multiplication and division). zThe number can be displayed up to 10 digits. Below the decimal point, up to 9 digits can be displayed. zIf the result of a calculation exceeds 10 digits, “.E” is displayed. 1i“LIFEKIT”“Calculator” Calculate■To calculate “23 + 57” 2 3 + 5 7 =2 3 j 5 7 d■To use negative numbers in a calculationTo calculate using negative amounts, simply insert “-” before the first digit. − 2 3 + 5 7 =h 2 3 j 5 7 d Calculator screen (p.295)Add shortcut→p.94NzThe charges for i-mode or packet communication, and the charges for sending Chaku-moji are not included in this function. To check i-mode communication charges, see the “Mobile Phone User’s Guide [i-mode] FOMA version”. ８／１７：０６￥３０００Ｓｅｔ−ｕｐｃｏｓｔｌｉｍｉｔｉｓｅｘｃｅｅｄｅｄＣｏｓｔｌｉｍｉｔＤａｔｅNzt ( or ) can be used in the following cases. • After pressing ＋,−,×,÷,＝, is displayed. You can start calculation from the beginning by pressing t. • While inputting numbers or decimal points, is displayed. You can delete wrong numbers or decimal points by pressing t. CalculatorFunction menup.295

296Convenient FunctionsComposing Text Memo<Text memo>You can write short messages in the form of text memos. You can paste a composed text memo into your schedule or mail message. zYou can store up to 10 text memos. zYou can enter up to 256 double-byte or 512 single-byte characters for a text memo. 1i“LIFEKIT”“Text memo”The “Text memo” screen appears. 2Highlight the item to store or change o (Edit)3Write the memoText memo screen (p.296)Edit……Edits the text memo. Compose message →p.156Edit schedule→p.285Add shortcut →p.94iC transmission→p.259Send Ir data→p.258iC trans. all→p.260Send all Ir data→p.258Copy to microSD→p.248Text memo info……Displays the creation date/time and category. Category……Selects a category to categorize from “None/Personal/Holiday/Travel/Business/Meeting”. Delete……Selects the deleting method from “Delete this/Delete selected/Delete all”. “About multiple-choice” →p.38Using Dictionaries<Dictionary>zYou can use dictionaries from the function menu of each text entry screen.→p.2971i“LIFEKIT”“Dictionary”The “Dictionary” screen appears. 2Select any item: Enter word……Enters a word. You can enter up to 32 double-byte or 64 single-byte characters. Text reader……Enters a word from the Text reader. →p.132Reference history……Searches the dictionary using the history of previously retrieved words. “Using reference history” →p.2973Select the dictionary typeThe “Reference result (list)” screen appears. When the searched word is not in the dictionary, the cursor is placed at the similar word. ■To display the previous or next listReference result (list) screenv4Select a wordThe “Reference result (detail)” screen appears. ■To display the previous or next wordReference result (detail) screenvText memoFunction menup.296DictionaryFunction menup.297Reference result (list)Function menup.297Reference result (detail)Function menup.297

297Convenient FunctionsDictionary screen (p.296)Add shortcut →p.94Reference result (list/detail) screen (p.296)Change window*……Switches the screen between Reference result and Text edit (available only when it can be switched). Copy……Copies the word. List screen: Copies the word in【】of the reference result for Japanese-English or Japanese dictionary, and copies the word of the reference result for English-Japanese dictionaryDetail screen: Copies the text by selecting the range. The copied word can be pasted into text entry screens, etc. →p.308Search from detail*……Search for another word from the reference result (detail) screen. d (Start) on the first character of the stringUse b to highlight to the end of the string and press d (End)Select the dictionary typeSelect a wordRefer dic.……Searches for the retrieved word in another dictionary. Refer edit*……Edits text referring to the Reference result (available only when Refer edit is available). “Divided” screen→p.303* : Available only for the reference result (detail) screen. Using reference history1Dictionary screen (p.296)“Reference history”The “Reference history” screen appears. 2Select a wordReference history screen (p.297)Delete this・Delete all……Deletes one or all reference history (histories). Using dictionaries from other functionsSelect “Refer dic.” from the respective function menus in the following screens: • The text edit screen, mail detail screen or message screen for i-mode mail• Pages on sites and while a screen memo is displayed■When activating a dictionary from the text edit screen, mail detail screen or message screen for i-mode mailYou can select “Enter word”, “Select area” or “Reference history”. Selecting “Select area” allows you to specify the range of the words you want to look up. ■When you activate the dictionary from a site or from a screen memoYou can select “Enter word”, “Site refer (enter)” or “Reference history”. Selecting “Site refer (enter)” allows you to enter the word you want to look up while referring to a screen memo or a page on a site. ●Guide to the dictionary reference screenWhen you select “Refer edit” or “Site refer (enter)”, the display is split into top and bottom halves. Each time you select “Change window” from the function menu, the window you can use switches between ① and ②. ■When you selected “Refer edit” from the Reference result (detail) screen①Dictionary detail screen②Text edit screen③Separation lineTo exit the dictionary, select “Quit dic.” from the function menu or switch to window ① and press o (End). ■When you selected “Site refer (enter)” from a screen memo or a page on a site①Site page or screen memo screen②Search term entry screen③Separation lineEnter the search term and press d (Set). The dictionary selection display appears with the search term entered. Reference historyFunction menup.297123

298Convenient FunctionsUsing Conversation Help Useful Overseas<TalkMan>TalkMan offers content to see conversation help useful overseas by text and voice.Select a language to see translated text and check the pronunciation.zEnglish and Chinese conversations are stored at the time of purchase although the voice is not available. Download voice-compatible content including English, Chinese, French, Spanish, German and Korean from “PlayNow” by SO (The site is in Japanese):“iMenu”“メニューリスト” (Menu List)“ケータイ電話メーカー ” (Mobile phone manufacturer)“PlayNow by SO”Alternatively, scan the QR code on the right and select the displayed URL to access the site.Using an Earphone/Microphone with Switch<Earphone/microphone with switch>You can make or receive a call by using a flat-plug earphone/microphone with switch (optional). zUse the Earphone Plug Adapter for External connector terminal to connect a flat-plug stereo earphone set (optional) or flat-plug earphone/microphone with switch (optional) to the FOMA terminal. →p.25zThe tone of the switch operation for receiving or ending the call sounds regardless of the “Keypad sound” setting. zDo not wrap the FOMA terminal with the cord of the flat-plug earphone/microphone with switch. This may interfere with signal reception. Also, if you move the cord of the flat-plug earphone/microphone with switch closer to the FOMA terminal while talking, you may hear the noise. zYou can make and receive a phone call with the FOMA terminal folded. Setting the switch operation<Headset sw to dial>You can specify whether to make a call when you hold down the switch for 1 second or longer. zYou can set phone numbers stored in the phonebook of the FOMA terminal (Phone) to this function. 1i“SETTINGS”“Dialing”“Headset sw to dial”“Voice call” or “OFF”2Display a phone number you want to set on the phonebook detail screen d (Select)Searching the phonebook→p.73Selecting a microphone when an earphone/microphone is connected<Select microphone>You can select the microphone to use when a flat-plug earphone/microphone with switch (optional) is connected from the microphone of the FOMA terminal or the microphone of the earphone/microphone. 1i“SETTINGS”“External connection”“Select microphone” “Internal microphone” or “External microphone”When you connect earphones without a microphone, select “Internal microphone”. ©SCEINzIf the phone number set in this function is not available due to the 2in1 setting, you cannot dial using a flat-plug earphone/microphone with switch. NzWhen “Select microphone” is set to “Internal microphone”, the microphone sensitivity becomes the same as the setting when handsfree is set to ON. When an earphone/microphone is connected, you do not need to talk with your mouth close to the mouthpiece.

299Convenient FunctionsUsing the switch to make calls1Press the switch for 1 second or longer on the standby screenThe FOMA terminal makes a call to a phone number set at “Headset sw to dial”. ■To dial by entering a phone numberEnter a phone numberPress the switch for 1 second or longerYou can also make a phone call from the phonebook, Redial/Dialed calls/Received calls.2When you finish talking, hold down the switch for 1 second or longerThe FOMA terminal emits a short double-beep and ends the call. Using the switch to accept calls1While ringingPress the switchThe FOMA terminal emits a short beep and answers the call. 2When you finish talking, hold down the switch for 1 second or longerThe FOMA terminal emits a short double-beep and ends the call. Automatically receiving calls with an earphone/microphone connected<Auto answer setting>When a flat-plug earphone/microphone with switch (optional) is connected, this function allows you to answer received calls automatically without pressing the switch. zYou cannot answer the call automatically during a voice or videophone call. 1i“SETTINGS”“External connection”“Auto answer setting” “Phone” or “Videophone”“ON” Enter the ring time (001 to 120 in 3 digits)■To disable the setting“OFF”Resetting the Function Settings<Reset settings>You can reset the FOMA terminal’s function settings to the defaults set at the time of purchase. zFor details on the functions that are reset, refer to “Menu Function List” (p.340). zWhen the FOMA terminal is connected to an external device such as a PC, the setting of “USB mode setting” is not reset to the default setting. zTo reset the functions below to default, run Reset settings in each function: • i-mode settings (reset)→p.148• Reset mail settings→p.178• Reset Full Browser settings→p.2211i“SETTINGS”“Other settings” “Reset settings”Enter your security code“YES”NzIf you have subscribed to the “Call Waiting”, you can answer a call that comes in during another call by pressing the switch on the flat-plug earphone/microphone with switch. You can also switch calls by pressing the switch for 1 second or longer. However, pressing the switch does not end the current call. zDo not repeatedly press and release the switch on the flat-plug earphone/microphone. The FOMA terminal may answer the call automatically. NzWhen answering a videophone call automatically, your substitute image is displayed to the caller. zConnecting an earphone/microphone with switch while the FOMA terminal is ringing does not answer a call automatically, but removing it while the terminal is ringing answers a call automatically. Do not mistake “Initialize” for “Reset settings”.If you perform “Initialize”, you will lose all the data you have stored. →p.300Nz“3G/GSM setting” may not be reset to default depending on the network condition.

301Character EntryCharacter Entry............................................................................................................... 302Entering Text Using 5-Touch ................................................................................ 304Modifying/Storing Common Phrases ............................................. 308Copying, Cutting and Pasting Text .................................................................................. 308Entering Text Using Kuten Codes.................................................................. 309Storing Frequently Used Words................................................................ 309Resetting the Learning Record ................................................................... 310Using Download Dictionaries............................................................. 310Entering Text Using 2-Touch ................................................................................ 310For the “Kuten code list”, refer to the PDF format “Kuten Code List” in the provided CD-ROM. To view the PDF format “Kuten Code List”, Adobe® Reader® is required. If this software is not installedon your PC, install the Adobe® Reader® in the CD-ROM. Refer to the “Adobe Reader ヘルプ” (Help ofthe Adobe Reader) for details on how to use it. 5-touchStore common phrasesKuten codeOwn dictionaryClear learnedDownload dictionary2-touch

302Character EntryCharacter EntryThe FOMA terminal has 2 character entry mode: “5-touch” and “2-touch”. This section explains the character entry mainly using the “5-touch input”. zRefer to the following sections for the settings, characteristics and method of each character entry mode.“Setting the character entry mode”→ p.303“Entering Text Using 5-Touch Input” →p.304“Entering Text Using 2-Touch Input” →p.310Character entry (edit) screenThe Character entry (edit) screen is made up of ① text entry area, ② information display area, and ③ list display area. The descriptions of icons displayed in each area are as follows:①Character entry area②Information display area②-1 Input mode displayCurrently selected input mode highlights.Displayed content varies depending on used inputmethod.• also appears in Kuten mode.→p.3095-touch2-touch②-2 Character count display②-3 Pictograph/Symbol type displayType of listed pictographs/symbols.③List display areaList of pictographs/symbols, conversion candidates,etc.Icon DescriptionCursor (Text entry position)Line feed mark (Line break position)Text entry (edit) screen①②-1③②-2②-3Function menup.306Display Input modeSingle-byte alphabetSingle-byte numberKanji/HiraganaSingle-byte katakanaDouble-byte alphabetDouble-byte numberDouble-byte katakanaDisplay Input modeSingle-byteDouble-byteUppercaseLowercaseDisplay Input modeNumber of remaining bytes that can be entered (single-byte character: 1 byte, double-byte character: 2 bytes)Number of characters that have been enteredDisplay Input modePictograph/Symbol input historyPictographsPictograph DSymbols

303Character EntryDivided screenSome screens, such as that for storing schedule entries while referring to the original message, are split into 2 windows displaying the function operation screen and the Character entry (edit) screen at the same time.zThe function operation screen and Character entry (edit) screen are displayed at the same time in the following cases: • Adding schedule entries while referring to an i-mode screen• Entering words to search by activating dictionaries from an i-mode screen• Editing text while referring to the results of a dictionary search●Changing windowsWhen a function operation screen and the Character entry (edit) screen are displayed at the same time, select “Change window” from the function menu to switch between screen.Setting the character entry modeYou can set the character entry mode you use from 2 character entry modes (5-touch/2-touch).1i“SETTINGS”“Other settings” “Character input set”“Input mode”Select input modeSwitching the character entry sizeYou can select the character size on the character entry (edit) screen or Symbol/Pictograph entry screen from 4 types of “Small/Standard/Large/X-large”.1i“SETTINGS”“Other settings” “Character input set”“CHG input size”Select the input sizeSetting the conversion methodSet the conversion method for Kanji/Hiragana input mode.zPrediction candidates are stored at the time of purchase.zUsing Prediction to input characters→p.3041i“SETTINGS”“Other settings” “Character input set”“Select conversion”Select conversion methodPrediction (default)……Predicts a word for an entered character or following word for a selected word.User conversion……Converts the entire reading after entered.NzEven in single-byte mode, double-byte characters are entered in Kanji/Hiragana input mode.zPictograph D is Deco-mail® pictograph that can only be entered on the Compose message screen, Edit header/signature screen or Edit Template screen.zThe number of characters that have been entered appears only in some functions, e.g. composing SMS.zOn the i-mode Message or Edit Template screen, if the number of characters that can be entered is exceeded, “−” (minus) appears.ＴｈｅｎｅｗｍｏｄｅｌｗｉｌｌｂｅｏｎｓａｌｅｆｒｏｍＡｕｇｕｓｔ２８，２００８．Ｗａｉｔｉｎｇｆｏｒｙｏｕｔｏｃｏｍｅｂｙ．ＩｎｆｏOperation screen for the functionCharacter entry (edit)screenSaving schedulereferring from i-modeNzYou can change input modes using the function menu while entering text.NzYou can change conversion methods using the function menu while entering text.

304Character EntryEntering Text Using 5-Touch<5-touch>You can enter 1 character by pressing a dial key for several times. For example, to enter “う”, the third character of the “あ column”, “あいうえお”, press 1 3 times. zRefer to “Characters that can be entered using 5-touch input” (p.350) for details on the character assignment.Entering kanji/hiragana/katakanaEnter the readings in hiragana, then convert them into the character such as kanji, hiragana or katakana.●Using Prediction to enter text<Example: To enter “ 携帯電話 ”>1Character entry (edit) screen (p.302) Set Kanji/Hiragana input modeWhen “Kanji/Hiragana input mode ( )” is not set, press o (Chrct) to switch the mode. 2Enter a part of the reading“け” is entered in the text entry area and predicted candidates appear.3gSelect a wordSelect “携帯”The selected words appears in the text entry area. Next predicted candidates which follows the selected word appears in the candidate list.■When the candidates do not includes the word you want to entertReturn to the reading entry. The predicted candidates change as you continue entering the reading.■To convert temporarilyp (Convert)User conversion list appears.→p.304■To display alphanumeric-katakana candidate list or image-symbol candidate listu (tab) or o (tab)Each candidate list appears.■To confirm the hiragana d (Set)4gSelect next wordSelect “電話”●Using User conversion<Example: To enter “ 健闘を祈る ”>1Change the conversion method to “User conversion”“Setting the conversion method”→p.3032Character entry (edit) screen (p.302) Set Kanji/Hiragana input modeWhen “Kanji/Hiragana input mode ( )” is not set, press o (Chrct) to switch the mode.3Enter hiragana■If you press the wrong key Press t to delete the character■If you press a key too many times qThe previous character assigned to that key appears. ■When the next character to be entered is assigned to the same key j or wait for cursor to move automaticallyCursor moves and the following characters can be entered. The wait time can be set from the function menu.→p.306■To confirm the hiragana d (Set)Predicted candidate list2 4 timesけNzPictograph idioms appear in the candidate list depending on the entered reading.Pictograph idiom readings →p.355zUse “Operation in item” to change operation modes to select word from candidate list.→p.303zConversion candidate list does not appear in the input mode other than Kanji/Hiragana input mode.zA word entered for once is added to the predicted candidate by the learning function. You can delete the added word by highlighting the word and pressing t for 1 second or longer. To delete all the learned predicted candidates, clear the leaned records of the word prediction with “Clear learned”.→p.3102 4 times0 3 times4 5 timesけん1 3 timesうと0 twice 1 twice5 5 timesをい9 3 timesるの

305Continued on next pageCharacter Entry4gConvert entered textThe first syllable converts and highlights. The unconfirmed text is underlined (_).■If the conversion candidate is the desired kanji or katakana d (Select)The word is confirmed and the next phrase is highlighted.■If the conversion candidate is not the kanji or katakana you wantgSelect wordSelect a word from the User Conversion Item. Hiragana and katakana are included in the User Conversion Item.If the readings in the conversion range consists entirely of “あ”-level characters, numbers are also included in the conversion candidates. For example, entering 123 (あかさ) also shows the conversion candidate “123”. ■To change the conversion range Press v to change the conversion rangegSelect wordCandidates listed in the User Conversion Item change as the conversion range changes.■To display the alphanumeric-katakana conversion candidate listto (Aa12カナ)Aa12カナ Conversion Item of alphanumeric-katakana candidates appears. For example, pressing 23 (かさ) o (Aa12カナ) shows the conversion candidates such as “AD”, “23” or “カサ”. For numbers of 2 to 4 digits which can be used as date (ex. 10/19) or time (ex. 10:19), such date and time are also displayed as conversion candidates. ●Changing selection methodsSelect b method or c method to select word fromPrediction list or User Conversion Item.1i“SETTINGS”“Other settings” “Character input set”“Operation in item”Select any item:↑↓←→Key (default)……Use b to select word from the displayed list. To change the conversion range, press t then use v.↑↓Key……Use c to select word from the displayed list. Press g to highlight next candidate, and f to highlight previous candidate. Press and hold c for 1 second or longer to move between candidate lines. To change the conversion range, use v.●The number of characters and scrolling■The number of bytes remaining and the number enteredThe number of bytes that can be entered or characters that have been entered on the Character entry (edit) screen is counted according to the rules listed below.• When the number of bytes is counted, each double-byte character is counted as 2 bytes and each single-byte character is counted as 1 byte. • When the number of characters is counted, single-byte/double-byte character, single-byte dakuten “゛” and han-dakuten “゜” are counted as 1 character respectively. In the Character entry (edit) screen, if the number of characters that can be entered using the current function is exceeded, the exceeding part appears in gray. Use as an approximate guide to how many more characters you can enter. ■ScrollingIn the Character entry (edit) screen, use c to scroll up and down one line at a time, and s (▼メモ) and a (▲マナー ) to scroll 1 page at a time. In the conversion candidates list, you can also use s (▼メモ) or a (▲マナー ) to scroll 1 page at a time.●Data protection during text entry and editingWhen you are entering text in the Character entry (edit) screen and the battery fails or you receive a voice call, the entered text is stored and not cleared from the screen. ■If the battery fails If the low-voltage alarm sounds during text entry, the Character entry (edit) screen is replaced by the “Recharge battery” message screen. When this happens, the entered text is automatically confirmed NzIf the User Conversion Item includes symbols, pictographs or face marks, you can convert the text to these symbols. Refer to the following lists for the readings of symbols, pictographs and face marks. • “Symbols List”→p.352• “Pictographs List”→p.353• “Face Marks List” →p.358zFor other text entry operations such as entering symbols, pictographs, or inserting a space or a line-feed, refer to “Useful keys to assist text entry” (p.306) and “Function menu of the Character entry (edit)” screen (p.306). zYou can use kuten codes to enter kanji that cannot be entered by conversion.→p.309

306Character Entryand saved so that you can continue entering the text when you turn the FOMA terminal back on and retrieve the function. However, in some functions, the entered data is not saved. Also, unconfirmed text that is being converted is not saved. Re-editing the phonebook→p.71■If you press yIf you press y while entering text, a message appears asking whether to discard and exit text entry. However, this message does not appear if no text is entered.<To quit without saving the text> Select “YES”. The previous screen or standby screen reappears without saving the entered text. You can also exit the text entry screen without saving the entered text by pressing y.<To continue entering text> Select “NO”. The Character entry (edit) screen reappears with the entered text still displayed. You can also return to the Character entry (edit) screen by pressing t. ■When you receive a voice call If you receive a voice call while entering text, you can answer the call without disturbing the text being entered. When the call ends, the Character entry (edit) screen reappears. You can use i (MULTI) during a voice call to display the task switch screen and return to the Character entry (edit) screen while talking.→p.283Other text entry functionsFor the operations such as switching the characterentry mode on the Character entry (edit) screen orentering symbols or pictographs, you can use usefulkeys as well as the function menus.●Useful keys to assist text entryCharacter entry (edit) screen (p.302)Single-byte⇔Double-byte……Switches the single-byte/double-byte modes. Common phrases→p.307Copy・Cut・Paste →p.308Undo……Undo the previous operation.Input method……Set input method.Input mode (default: 5-touch)……Toggle 5-touch/2-touch.Auto cursor (default: 1(slow))……Set speed of auto cursor movement (□ to I). Select “off” or “1” to “5”.off: Does not move (remains □)1: Slowest, 5: FastestKey Descriptionp (Pict/Sym)Enters pictographs or symbols continuously. The list changes as follows every pressing p (Pict/Sym). History→Pict→Pict-D*→Symbol*: Only appears on the Compose message screen, Edit header/Edit signature screens and Edit Template screen.To end the continuous entry, press u (Close) or t.“Symbols list”→p.352“Pictographs” →p.353p (Pict/Sym)(1 second or longer)Displays the Pictgraph D (Deco-mail® pictograph) entry screen which is arranged by the categories.→p.157*: Only available on the Compose message screen, Edit header/signature screen or Edit Template screen.o (Chrct) zThe character mode switches each time you press o (Chrct) in 5-touch mode.Alphabetic (single-byte)→Numeric (single-byte)→Kanji/Hiragana (double-byte)→Katakana (single-byte)* Use the function menu “Single-byte/Double-byte” to switch “Single-byte” and “Double-byte” in Katakana, alphabets and numbers modes. zDouble-byte and single-byte switches each time you press o (Ａ/AB) in 2-touch mode.Double-byte→Single-bytewEnter Dakuten, Han-dakuten or punctua-tion marks.qzEnters a line feed “ ” and moves the cursor to the next line.zReturns to the previous reading in 5-touch input mode. (Example: え→う)rConvert entered character to uppercase/lowercase. (Example: つ→っ , a→A)0zPress repeatedly to enter a space.zEnter a punctuation mark, etc.zWhen the cursor is at the end of the text, pressing j enters a space and pressing g enters a line feed symbol “ ”.N<History>zPreviously entered pictographs and symbols appear.Key Description

308Character EntryModifying/Storing Common Phrases<Store common phrases>You can store frequently used phrases as common phrases in advance so that they can be retrieved when entering text. zUp to 10 original common phrases can be stored in the “Original” folder.zEach of the 8 category folders other than “Original” contains 10 pre-installed common phrases.→p.359zPre-installed common phrases can be edited.zFolders can be renamed.Composing a new common phrase1i“OWN DATA”“Common phrases”The “Common phrase folder list” screen appears. 2Select a folderThe “Common phrase list” screen appears. 3Highlight “<Not stored>”o (Edit) Enter the common phraseCommon phrase folder list screen (p.308)Edit folder name……Edits the folder name. You can enter up to 10 double-byte or 20 single-byte characters. Reset name……Resets the folder name to the default folder name. iC trans. all→p.260Send all Ir data→p.258Common phrase list screen (p.308)Edit……Edits the common phrase. iC transmission→p.259Send Ir data→p.258Delete this・Delete all……Deletes one or all common phrase(s). Copying, Cutting and Pasting TextzOnly one item of copied or cut data can be stored. Copying or cutting a new item overwrites the previously stored text. Copying (or cutting) text1Character entry (edit) screen (p.302) u (FUNC)“Copy” or “Cut”2Move the cursor to the beginning of the text to be copied or cutd (Start)■To select all texto (All)3Move the cursor to the end of the text to be copied or cutd (End)The selected text is stored. You can store up to 5,000 double-byte characters or 10,000 single-byte characters. ■If the text is cutThe selected text is deleted, but it is stored in the FOMA terminal. NzYou can use pictographs in common phrases for mails. Common phrase folder listFunction menup.308Common phrase listFunction menup.308

309Character EntryPasting textzOnce you have cut or copied text, you can paste that text as many times as you like until you cut or copy other text next time or turn the FOMA terminal off. 1Character entry (edit) screen (p.302) Move the cursor to the position to pasteu (FUNC)“Paste”■If the text to be pasted includes characters that cannot be entered in the intended Character entry (edit) screenA message appears notifying you that the characters will be replaced by spaces when the text is pasted. Entering Text Using Kuten Codes<Kuten code>This function provides a way of entering kanji, hiragana, katakana, symbols and alphanumeric characters using 4-digit “kuten” codes. zFor the Kuten code and the characters that can be input using the Kuten code, refer to the PDF format “Kuten Code List” in the provided CD-ROM. zThe character or a symbol in the Kuten Code List may be displayed differently on the screen. <Example: To enter “ 慶” (kuten code 2336)> 1Character entry (edit) screen (p.302) u (FUNC)“Kuten code” The input mode changes to “Kuten code input mode” and “ ” appears in the information display area. 2Enter kuten code 2336The character (“慶” in this example) for the entered code appears and the FOMA terminal reverts to the original input mode. ■If there is no corresponding character for the entered kuten codeA space is entered. Storing Frequently Used Words<Own dictionary>You can store frequently used words in the own dictionary under your preferred reading and recall these words by entering and converting the reading in the Character entry (edit) screen. zOwn dictionary can store up to 100 words. zEach Word can contain up to 10 double-byte or 20 single-byte characters. Readings can include up to 10 double-byte hiragana. 1i“OWN DATA”“Own dictionary”The “Own dictionary” screen appears. 2“<New>”Enter the wordEnter the reading■To check the wordsSelecting checking words■To edit a wordHighlight the word you want to changeo (Edit)Own dictionary screen (p.309)Edit……Edits the stored word. iC transmission→p.259Send Ir data→p.258iC trans. all→p.260Send all Ir data→p.258Delete……Selects the deleting method from “Delete this/Delete selected/Delete all”. “About multiple-choice”→p.38NzRegistered words can be entered using Prediction. Some readings do not show candidates until converted and entered.Own dictionaryFunction menup.309

310Character EntryResetting the Learning Record<Clear learned>The learning record contains character strings that were entered in the past and automatically stored as candidates for character conversion. This procedure resets the learning record to its default status at the time of purchase. 1i“SETTINGS”“Other settings” “Character input set”“Clear learned” Enter your security codePrediction/ImgSym.……Clears the learned records stored using “Prediction”, “Pictograph”, “Face Mark” and “Symbol”.Kana/Kanji change……Clears the learned record order for User conversion.Using Download Dictionaries<Download dictionary>You can set the dictionaries downloaded from i-mode sites, etc. for Prediction. zThe FOMA terminal can store up to 5 download dictionaries. zThe dictionary is activated when downloaded. zFor information on downloading dictionaries→p.1461i“OWN DATA”“DL dictionary”The “Download dictionary” screen appears. 2Select a dictionaryA star “★” appears next to the active dictionary. ■To inactivateSelect a dictionary marked with a star “★”. The dictionary is inactivated and the star “ ★” disappears.Download dictionary screen (p.310)Edit title……Edits the title of the download dictionary. You can enter up to 10 double-byte or 20 single-byte characters. Set dictionary……Activates or inactivates the download dictionary. Dictionary info……Displays information for the download dictionary. Delete this・Delete all……Deletes one or all download dictionary (dictionaries). Entering Text Using 2-Touch <2-touch>You can enter 1 character by pressing 2 dial keys. For example, to enter “ う”, press 13 in sequence as “う” is the third character of the “あ column”, “あいうえお”. zRefer to “Characters that can be entered using 2-touch” (p.351) for details on the character assignment. zThe conversion method using Prediction/User conversion is the same as that of 5-touch.→p.304<Example: To enter “ けんとう ”>1Character entry (edit) screen (p.302) Set to Double-byte input modeWhen “Double-byte input mode ( )” is not set, press o (Ａ/AB) to switch the mode. 2Enter the hiraganaDownload dictionaryFunction menup.310Nzw is also available to enter “Dakuten/Han-dakuten” or to switch.zr is also available to toggle “Uppercase/Lowercase”.zFunction menu “Single-byte/Double-byte” is also available to toggle “Single-byte/Double-byte”.24け45と03ん13う

311Network ServicesVoice Mail Service ........................................................................................... 312Call Waiting.................................................................................................... 313Call Forwarding Service........................................................................... 314Nuisance Call Blocking Service ............................................................. 315Caller ID Request Service ..................................................................... 316Dual Network Service ................................................................................. 316English Guidance................................................................................... 316Service Dialing Number ......................................................................... 317Handling Calls Received During a Call ....................................... 317Setting up Remote Control ...................................................................... 318Multi Number.....................................................................................................3192in1 .......................................................................................................................... 320OFFICEED ............................................................................................................ 324Adding and Using Services ................................................................... 324zYour FOMA terminal provides you with access to a range of useful DOCOMO network services. For the outline and the details on the services, refer to the reference pages in the following table. zFor the service used by connecting to the Network Service Center, you cannot operate the service with “ ”. zFor the application and questions, contact the inquiries number provided on the back of this manual. zThis section explains the overview of the network services using the menus on the FOMA terminal. For more details, see “Mobile Phone User’s Guide [Network services]”.z“OFFICEED” is a fee-based service and requires a subscription. For details, visit DOCOMO Website for corporates (http://www.docomo.biz/d/212/) (Japanese).Voice MailCall WaitingCall ForwardingNuisance Call BlkCaller ID RequestDual NetworkEnglish GuidanceService NumbersIn-Call Function SelectionRemote ControlMulti Number2in1OFFICEEDAdditional serviceAvailable Network ServicesService nameSubscriptionMonthly usage feesRef. pageVoice MailServiceRequired Charged p.312Call Waiting Required Charged p.313Call ForwardingServiceRequired Free p.314Nuisance Call BlockingNot requiredFree p.315Caller ID NotificationNot requiredFree p.46Caller ID RequestNot requiredFree p.316Public mode(Driving mode)Not requiredFree p.62Public mode(Power OFF)Not requiredFree p.63Dual Network ServiceRequired Charged p.316English GuidanceNot requiredFree p.316Multi Number Required Charged p.3192in1 Required Charged p.320OFFICEED Required Charged p.324Melody call Required Charged p.84Service nameSubscriptionMonthly usage feesRef. page

312Network ServicesVoice Mail Service<Voice Mail>When you are in the out of service area, when the FOMA terminal is not turned on, or when you cannot answer the call, this service plays an answer message to the caller of the voice or videophone call and stores the caller’s message on your behalf. zTo give priority to voice mail when “Record message” (p.64) is set at the same time, ensure that the ring time set for voice mail is shorter than the ring time set for “Record message”. zWhen you do not answer the voice or videophone call when the Voice mail service is set to “Activate”, calls are logged in the “Received calls” record as “Missed calls” record, and the “Missed call” shortcut icon appears on the standby screen.zThe message can be recorded up to 3 minutes for 1 message, up to 20 messages for each of the voice and videophone calls, and stored up to 72 hours. Basic flow of Voice mail service operationUsing the Voice Mail service1i“SERVICE”“Voice Mail”Select any item: Play messages*1……The FOMA terminal calls the Voice mail service center. Plays the recorded messages by following the audio guidance. Activate*1……Activates the Voice Mail service. The ring time (000 to 120 seconds) can be set. When set to 0 second, received calls are not recorded in the “Received calls” record. Deactivate*1……Deactivates the Voice mail service. Set ring time……Changes the ring time only (000 to 120 seconds). Check setting*1……Checks the current Voice mail service settings. • About the function menu of the displayed “Voice Mail setting” screen.→p.313Setting*1……Changes the Voice mail service settings using audio guidance. The FOMA terminal calls the Voice mail service center. Specify the settings by following the audio guidance. Check messages……Checking whether there is a recorded message. Message notification*2……Emits the original notification tone when the number of recorded messages stored at the Voice mail service center increases. Erase icon……Clears the “ ” icon (Voice mail icon) from the standby screen. Activate notice call……When you receive a call while the FOMA terminal is turned off or is out of the service area, an SMS is sent to notify you of the information about the call (date, time and the caller ID) once you turn the FOMA terminal back on or move back in to the service area. All Calls……Notifies you of all received calls. Calls with Caller ID……Notifies you of only the calls with the caller ID. Deactivate notice call……Deactivates the notice call. Notice call status……Checks the current Notice call service settings. *1: When 2in1 is set to Dual mode, the screen appears to select Number A or Number B. However, the selection screen appears for “Check setting” even in B mode. *2: Only for the recorded message of voice calls. Voice Mail service activatedIf the caller is in a hurry and wishes to leave a message without listening to the Voice Mail answering message, he or she can interrupt the answering message and switch to message recording mode immediately by pressing q.Your FOMA terminal receives a voice/videophone callYou cannot answer the call and it is connected to the Voice Mail service centerThe caller records a messageThe Voice Mail service center notifies you that you have a recorded messageYou listen to the recorded message

313Continued on next pageNetwork ServicesVoice Mail setting screen (p.312)Activate・Deactivate……Activates or deactivates the Voice mail service. Set ring time……Changes the ring time. Call Waiting<Call Waiting>When you receive a call while talking on a call, this service notifies the call with a ring tone and you can answer the newly received call by putting the current call on hold. You can also put your current call on hold and make a new call to someone else. zTo use Call waiting, select “Answer” in “Incoming Call Mng” (p.317) beforehand. If another setting is selected, you will not be able to answer a voice call received during another voice call even when Call waiting is activated. zYou can answer another call when you receive a videophone call during a voice call or when you receive a voice call or videophone call during a videophone call if you activate Call waiting and set “Incoming Call Mng” to “Answer”. In this case, you have to end the current voice call or videophone call (You cannot put the current call on hold).→p.317Using the Call Waiting1i“SERVICE”“Call Waiting” Select any item: Activate・Deactivate……Activates or deactivates the Call waiting service. Check setting……Checks the current Call waiting service settings. Putting the current voice call on hold to answer a new received voice call1When you hear the double tones (repeated soft double-beeps) during a voice call, press rYour first call is automatically put on hold and the FOMA terminal answers the new voice call. 2Switch back to the first call■To end the call with the second calleryrThis ends the call with the second caller and returns you to your first call. ■To put the second caller on holdr This puts the second caller on hold and returns you to your first call. You can switch back and forth between the 2 calls by pressing r. NzTo change the Voice mail service setting for videophone calls, make a voice call to “1412”. zDTMF is not available if connected to Voice Mail with Chara-den. Select “Send DTMF tone” from the function menu to activate Send DTMF tone mode.→p.50<Check setting>zWhen checking Number B setting for 2in1, only the active or inactive information appears. <Check messages>zIf you have the recorded messages stored at the Voice mail service center, the “ ” (voice mail icon) and “ ” (“Voice mail” shortcut icon) appear on the standby screen for the recorded messages of voice calls. The recorded messages of videophone calls are notified by SMS. zThe number in the voice mail icon changes according to the number of stored messages “ ”, “ ”, “ ” ... “ ” (10 messages or more). The displayed number of Voice mail messages is the number of new messages announced by the Voice mail center. The number of stored messages is not included. zYou may not be able to use this function to check for the message recorded after checking the message. <Message notification>zWhen 2in1 is set to A mode or B mode, the notification tone does not sound when a message is recorded for the unused number. <Erase icon>zClearing the icon does not delete the corresponding recorded messages. The voice mail icon appears again when you check for messages. <Activate notice call>zEven if you set the SMS Rejection setting, the FOMA terminal receives the notification.

314Network Services■To end the voice call on holdu (FUNC)“End held call”Ending the current voice call to answer another voice call1When you hear the double tones (repeated soft double-beeps), press yThe first call is ended and the ring tone sounds. 2rThe FOMA terminal answers the new voice call. Putting the current voice call on hold to make a voice call to someone elseYou can put your current voice call on hold and make a new voice call to someone else. 1Dial another phone number during your current callrYour first call is automatically put on hold and the FOMA terminal switches to the new call. You can also make calls by searching the phonebook. Searching the phonebook→p.732Switch back to the first call■To end the new callyrThis ends the new call and returns you to your first call. ■To put the new call on holdr This puts the new call on hold and returns you to your first call. You can switch back and forth between the 2 calls by pressing r. ■To end the voice call on holdu (FUNC)“End held call”Call Forwarding Service<Call Forwarding>When you are in out of service area or when the FOMA terminal is not turned on, or when you do not answer the call within the set ringing time, this service forwards the voice/videophone call. zTo give priority to the Call forwarding service when “Record message” (p.64) is set at the same time, ensure that the ring time set for the Call forwarding service is shorter than the ring time set for “Record message”. zWhen you do not answer the voice or videophone call when the Call forwarding service is set to “Activate”, calls are logged in the “Received calls” record as “Missed calls” record, and the “Missed call” shortcut icon appears on the standby screen. Basic flow of Call forwarding service operationCall forwarding service call chargesYour FOMA terminal receives a voice or videophone callIf you do not answer the voice or videophone call, it is automatically forwarded to the specified numberCall Forwarding number registeredCall Forwarding service activatedCallerCall Forwarding service subscriberForwarding numberCharges paid by the caller.Charges paid by the Call Forwarding service subscriber.

315Network ServicesUsing the Call Forwarding service1i“SERVICE”“Call Forwarding” Select any item: Activate*1……Set the forwarding number and the ring time, then select “Activate”. Register fwd number……Enter the forwarding number. Once you set the number, a star “★” appears next to “Register fwd number”. • You can use f or g to enter the number by searching the phonebook. How to search the phonebook→p.73Set ring time……Enter the ring time (000 to 120 seconds). Once you set the number, a star “★” appears next to “Set ringing time”. When set to 0 second, received calls are not recorded in the “Received calls” record. Activate……Activates the Call forwarding service. Deactivate*1……Deactivates the Call forwarding service. Change forwarding No……Enter a phone number to set a new forwarding number.When you select “Change No.+Activate”, you can also set the Call Forwarding Service to “Activate” at the same time. Fwd number busy*2……When the forwarding number is busy, received calls are transferred to the Voice mail service center. Check setting*1……Checks the current Call forwarding service settings. *1: When 2in1 is set to Dual mode, the screen appears to select Number A or Number B. However, the selection screen appears for “Check setting” even in B mode. *2: The subscription to the “Voice Mail service” is required. Setting or canceling the call forwarding guidance message1On the standby screen142 9r• Set the call forwarding guidance message by following the audio guidance message. • For more information, refer to the “Mobile Phone User’s Guide [Network Services]”. Nuisance Call Blocking Service<Nuisance Call Blk>This service enables you to reject receiving “Nuisance calls”. Once you store the number to reject, calls from the number are automatically rejected and answered by a message. zThe ring tone does not sound even when you receive a call from the number stored to reject. Also, the call is not recorded in “Received calls” record. Using the Nuisance Call Blocking service1i“SERVICE”“Nuisance Call Blk” Select any item: Register Caller……Registers the number of the last caller you answered as a barred numbers. Register number……Registers the phone number by using the dial keys or quoting from the phonebook or Received calls record, etc. • You can use f or g to enter the number by searching the phonebook. Searching the phonebook→p.73• You can use h to search the Received calls record and j to search the Redial record. Delete last entry……Deletes the last registered phone number. By repeating the same procedure, you can delete the stored barred number one by one from the last one. Delete all entries……Deletes all the barred numbers. The number of entries……Checks the number of call barring entries. N<Activate>zWhen 2in1 is set to B mode, you cannot select “Register fwd number” and “Set ring time”. <Change forwarding number>zWhen 2in1 is set to B mode, you cannot select “Change No. + Activate”. <Check setting>zWhen checking Number B setting for 2in1, only “Active” or “Inactive” appears.

316Network ServicesCaller ID Request Service<Caller ID Request>When you receive a voice/videophone call from a caller who do not provide his or her phone number (caller ID), the call is answered by a message requesting the Caller ID, then the call automatically ends. zCalls rejected by the Caller ID request service are not logged in the “Received calls” record and no “Missed call” shortcut icon appears. Using the Caller ID Request service1i“SERVICE”“Caller ID Request” Select any item: Activate・Deactivate……Activates or deactivates the Caller ID request service. Check setting……Checks the current Caller ID Request service settings. Dual Network Service<Dual Network>This service enables you to use the mova terminal with the phone number of your FOMA terminal. You can switch between the FOMA network and the mova network depending on the service area. zYou cannot use the FOMA terminal and the mova terminal at the same time. zSwitch the Dual network service from the terminal which is not using the service. zFor details on how to access the service from a mova terminal, refer to the “Mobile Phone User’s Guide [Network Services]”. Overview of Dual Network serviceUsing the Dual Network service1i“SERVICE”“Dual Network” Select any item: Dual Network switching……The network security code is required to switch. Network security code→p.100Check setting……Checks whether the FOMA terminal can access the services or not. English Guidance<English Guidance>You can set English as the language used in guidance messages for setting network services such as the “Voice Mail” service or the audio message such as the out of area warnings. *: Some services are not available.・ Switching Dual Network Service from the FOMA terminal switches to the FOMA network.・ Switching Dual Network Service from the mova terminal switches to the mova network.Same phone numberFOMA networkmova network*FOMA terminal mova terminalNzIf you use Dual Network Service on the mova terminal in Japan after using the FOMA terminal overseas, turn on the FOMA terminal before use. <Dual Network switching>zTo switch networks, end communication from the terminal that is currently able to access services before making the switch. Item Language GuidanceOutgoing(including the guidance for the settings of the network services)Japanese Plays in Japanese. English Plays in English. Incoming(guidance messages played to callers)Japanese Plays in Japanese. Japanese+EnglishPlays in Japanese first and then in English. English+JapanesePlays in English first and then in Japanese. NzCaller’s setting has priority over receiver’s setting between DOCOMO’s handsets.

317Network ServicesUsing the English Guidance1i“SERVICE”“English Guidance” Select any item: Guidance setting……Selects the setting from the following: Outgoing+Incoming……Selects the language for outgoing calls from “Japanese/English”, then selects the language for incoming calls from “Japanese/Japanese+English/English+Japanese”. Outgoing call……Selects the language only for the outgoing calls from “Japanese/English”. Incoming call……Selects the language only for the incoming calls from “Japanese/Japanese+English/English+Japanese”. Check setting……Checks the current English guidance settings. Service Dialing Number<Service Numbers>You can make a call to the DOCOMO general help desk and service counter for information on faults, etc. zThe displayed items may be different or the items are not displayed depending on the FOMA card (UIM) you are using. 1i“SERVICE”“Service Numbers” Select any item: ドコモ故障問合せ……Calls the DOCOMO service desk. ドコモ総合案内・受付……Calls the DOCOMO general information desk. Handling Calls Received During a Call<In-Call Function Selection>You can specify how to handle voice calls, videophone calls and 64K data communication that arrives during a call when you have subscribed to the “Voice Mail”, “Call Forwarding” or “Call Waiting” service. zIf you have not subscribed to “Voice Mail”, “Call Forwarding” or “Call Waiting” service, you cannot answer the calls received during calls. zTo use “Incoming Call Mng”, set “Set in-call arrival” to “Active”. Selecting how to handle incoming calls during another call<Incoming Call Mng>1i“SERVICE”“Incoming Call Mng” Select any item: Voice Mail……Transfers voice or videophone calls received during a call to the Voice mail service center regardless of the “Call Waiting” and “Voice Mail” service settings. Call Forwarding……Transfers voice and videophone calls received during a call to the forwarding number regardless of the “Call Waiting” and “Call Forwarding” service settings. Call Rejection……Rejects voice and videophone calls and 64K data communication received during a call. Answer……If “Call Waiting” is activated and a voice call is received during another voice call, you can use the “Call Waiting” service. If call waiting is not activated or during a videophone call or 64K data communication, the call can be handled in any of the following ways: • You can end the current voice or videophone call or 64K data communication, and answer the received voice or videophone call or 64K data communication. • You can use the function menu to manually handle a voice call, videophone call or 64K data communication received during a call. →p.318• If “Voice Mail” service or “Call Forwarding” service is activated, calls can be handled using these service settings. Set in-call arrivalActivates/deactivates the function setting selected in “Incoming Call Mng” or checks the setting. 1i“SERVICE”“Set in-call arrival” Select any item: Activate……Activates the “Incoming Call Mng” setting. Deactivate……Deactivates the “Incoming Call Mng” setting. Check setting……Displays the current setting.

318Network ServicesEnding the current call or 64K data communication to answer a received call●When the current call and incoming call are the same type<Example: To end the current voice call to answer an incoming voice call> 1When you hear the double tones (repeated soft double-beeps), press yThis ends the current call and the FOMA terminal starts ringing. ■For videophone or 64K data communicationThe ringing call screen appears. y 2rThis accepts the incoming voice call. ■For 64K data communicationReceive the call on a PC●When the current call and incoming call are different typesIf you receive a videophone call or 64K data communication during a voice call, if you receive a voice call or 64K data communication during a videophone call, or if you receive a voice or videophone call during 64K data communication, use this procedure to end your current call or 64K data communication to answer the incoming call. <Example: To end the current videophone call to answer an incoming voice call> 1You hear the double tones (repeated soft double-beeps) and the voice call ringing screen appearsWhen you receive a 64K data communication, the double tones (repeated soft double-beeps) do not sound. 2r■For 64K data communicationyReceive the call on a PCManually rejecting calls or connecting to the Call Forwarding or Voice Mail service<Example: When Set in-call arrival is set to “Activate” and Incoming Call Mng is set to “Answer”> 1When you hear the double tones (repeated soft double-beeps), press u (FUNC)2Select how to handle the received call■To reject a received call“Call Rejection”■To forward a received call to the forwarding number“Call Forwarding”■To transfer a call to the Voice mail service center“Voice Mail”With any of the above procedures, you can return to your first call. Setting up Remote Control <Remote Control>You can operate the “Voice Mail” or “Call Forwarding Service”, etc. from push-key-type ordinary phones, payphones, DOCOMO mobile phones, etc. zTo use the “Voice Mail” or “Call Forwarding” service overseas, set Remote Control beforehand. zFor details on operating network services from a payphone, etc., refer to the “Mobile Phone User’s Guide [Network Services]”. 1i“SERVICE”“Remote Control” Select any item: Activate・Deactivate……Activates or deactivates the Remote control. Check setting……Checks the current Remote control settings.

319Network ServicesMulti Number<Multi Number>You can add and use the maximum of two additional numbers (additional number 1 and additional number 2) other than the basic number as the phone numbers of the FOMA terminal. zCannot be used with 2in1 at the same time. zThe name stored for the multi number (basic number, additional number 1/2) respectively appears on the screen when making or receiving a call. zWhen you make a call using the Redial/Received calls record, the multi number used for making or receiving a call at the last time is displayed and the call is made from the number. Using Multi Number1i“SERVICE”“Multi Number” Select any item: Set Multi Number……Specifies the phone number you use for ordinary calls. Basic Number*……Sets to call from the subscribed phone number (basic number). Additional Number1・Additional Number2*……Sets to call from the additional number. Check setting……Checks the current Multi number settings. Number Setting……Registers the additional number notified at the subscription of the Multi number to the FOMA terminal. Highlight the item to register (or change) the additional numbero (Edit)Enter the name Enter the additional numberYou can enter up to 8 double-byte or 16 single-byte characters for the name and you can enter up to 26 digits for the additional number. • About the function menu of the “Multi Number setting” screen which appears when “Phone number record” is selected.→p.319Select ring tone……Sets the ring tone for the received calls to the additional number 1 and additional number 2 respectively.→p.82* : When the name is changed, registered name appears respectively. Multi Number setting screen (p.319)Edit……Edits the name in the basic number or the phone number in the additional number. Delete this……Deletes one name in the basic number or one name and phone number in the additional number. Delete all……Deletes all names in the basic number and all names and phone numbers in the additional number. Switching the phone number for each callYou can switch the phone number each time you make a call. 1Enter phone number screen (p.48)u (FUNC)“Multi Number”Select any item: Basic Number*……Sets to call from the subscribed phone number (basic number). Additional Number1・Additional Number2*……Sets to call from the additional number. Cancel number……Cancels the setting, allowing you to dial following “Set Multi Number” setting. * : When the name is changed, registered name appears respectively. NzIf you remove the FOMA card (UIM) or change to other FOMA card (UIM), the multi number settings data (names and phone numbers, etc) on the FOMA terminal may be erased. In this case, saving the data again. <Number Setting>zThe name appears when you make various settings of the multi number function or when you select a phone number to use for each call. <Select ring tone>zRefer to p.83 for the priority when the ring tone settings are duplicated. NzYou can also switch the phone number from the function menu of phonebook detail screen, detail screen of Redial/Dialed calls/Received calls records, etc. N

322Network Services*5: This function shows names which are checked against the name of data saved in phonebook with each number/address and converted into that name, when phone numbers on dialing/incoming, numbers on sending/receiving or addresses on sending/receiving are saved in phonebook. *6: A is applied when the terminal of the sender does not support 2in1. *7: The destination address is selectable from B setting phonebook when composing a new mail in Dual mode, however, please note that the mail is sent from Address A. Note that if you forward a mail to Address B in Dual mode, the mail is sent from Address A. *8: Unavailable for each i-αppli standby screen, Mail-linked i-αppli and the i-αppli used with mail functions. *9: Unavailable for i-αppli standby screen. Using 2in1Set 2in1 to ON and perform settings operations. 1i“SERVICE”“2in1 setting”Enter your security code“YES”Select any item: ■When 2in1 is set to ONAfter entering the security code, 2in1 setting screen appears without showing the screen to confirm whether to set 2in1 to ON is not displayed. Mode switching……Selects the 2in1 mode from “A mode/B mode/Dual mode”. “About Modes”→p.320Phonebook 2in1 settingPhonebook 2in1 setting……Highlight the phonebook entry to set and press d (Switch) to select the mode, then press o (Finish). The mode switches as follows each time you press d (Switch): (A mode)→(B mode)→(Dual mode) How to search the phonebook→p.73Group 2in1 setting……Highlight the group to set and press d (Switch) to select the mode, then press o (Finish). The mode switches as follows each time you press d (Switch): no setting→ (Dual mode)→(A mode)→(B mode) Stand-by display……Sets the standby screen displayed in B mode or Dual mode respectively.→p.89“★” appears for the changed item. To reset the setting, press o (Release). Set call/receive No.Disp. call/receive No.……Sets to display the information (name, phone number, mail address, etc.) of “Number A (Address A)” and “Number B (Address B)” in different font color to distinguish when making/receiving a call. Press o (Switch) to switch the color of the pallet (16 colors or 256 colors). Press p (Reset) to reset to the default setting. Ringtone for Number B……Set the incoming operation (ring tone, image, illumination, vibration, answer message) performed when receiving a voice call, videophone call or mail (Ring tone, illumination and vibration can be set in Mail (recv.)).Voice call (recv.), V.phone (recv.), Mail (recv.)……• “Ring tone”: Go to Step 2 in “Changing the Ring Tone” (p.82).• “Image”: Go to Step 2 in “Changing the Display” (p.88).• “Illumination”: Go to Step that comes after selecting “Incoming Call”, “Incoming V.phone” or “Mail receiving” in Step 1 of “Setting the Illumination Flashing” (p.92).• “Vibrator”: Go to Step 2 in “Setting the Vibration to Notify You of Incoming Calls” (p.84).• “Answer message”: Go to the subsequent step after selecting “ON” in “Setting Record message” (p.64).2in1 function OFF……Sets 2in1 to OFF. Rcv. avoid. setting……Restricts incoming calls for Number A and Number B. Change rcv. avoid.……Sets the Rcv. avoid. setting for Number A and Number B. Check rcv. avoid.……Checks the Rcv. avoid. setting for Number A and Number B. Mode link……Sets the linkage for changing 2in1 mode and Rcv. avoid. setting. Incoming calls only for Number A are accepted in A mode, incoming calls only for Number B are accepted in B mode, and incoming calls for both mode are accepted in Dual mode. * When the function is activated, you cannot switch the mode with “ ” displayed. Rcv. avoid. (abroad)……Sets the Rcv. avoid. setting overseas (when Mode link is active, the Rcv. avoid. (abroad) is disabled).

323Network ServicesSwitching phone numbers each time when making a callWhen 2in1 is set to ON and the mode is set to Dual mode, phone numbers can be switched when making a call. zThis function is available only on the detail screen of “Phonebook/Received calls/Dialed calls/Redial”. <Example: To make a call using the phonebook>1Phonebook detail screen (p.73)u (FUNC)“Dial setting”“2in1/Multi Num.”Select any item: Number A……Allows calls to be made from Number A. Number B……Allows calls to be made from Number B. Cancel number……Releases the setting and allows calls to made according to Phonebook 2in1 setting. NzWhen 2in1 is set to OFF, you can also perform “2in1 settings” by pressing 8 for 1 second or longer on the standby screen. <Mode switching>zYou can also change mode by pressing 8 for 1 second or longer on the standby screen. <Phonebook 2in1 setting>zYou cannot set this function to UIM phonebook entries. zSelect “Display detail” from the function menu to display “Phonebook detail” screen from “Phonebook list” screen in this function. <Standby display>zWhen Change Mode is set to A mode, standby screens are displayed according to “Display setting”. zWhen set to the Kisekae Tool you downloaded, the i-αppli standby screen or the random display, the default screen appears even when “Same as Number A” is set. <Disp. call/receive No.>zNames, phone numbers and mail addresses in the screens below will be displayed in the set color. • In-call screen• Dialing/Receiving screen• Redial/Dialed calls (list/detail)• Received calls (list/detail)•Sent*/Received address record screen (list/detail)• Chaku-moji Sent messages record screen* : In B mode, the screen for sent addresses cannot be displayed. zThe setting for Number A/Number B (Address A/Address B) applies to each screen even when 2in1 is set to OFF. <Ringtone for Number B>zWhen making the same settings to Number A and Address A, set each item as “Same as Number A”. zWhen the ring tone settings are duplicated, the priority applies.→p.83When you receive a call without caller ID on Number B, priority is given to the “Ringtone for Number B” setting. Nz“2in1/Multi Num.” in the function menu cannot be selected when the mode is set to A mode or B mode. zWhen the following operations are performed, the phone number selection screen is displayed and the phone number to use can be selected. • When making calls by entering phone number in the phone number entry screen• When using services from the special number registered in Additional service• When “Dialing” from the function menu in Sent/Received address list is selected• When using the Phone to function• When pressing the switch on the flat-plug earphone/microphone with switch (optional) on the phone number entry screenzDialing or AT command dialing from an external device uses Number A for A mode/Dual mode and Number B for B mode.

324Network ServicesOFFICEED<OFFICEED>“OFFICEED” is an in-group flat-rate service provided by specified Inbuilding Mobile Communication System (IMCS). A separate subscription is required to use the service. For details, visit DOCOMO website for corporates (http://www.docomo.biz/d/212/) (Japanese).Adding and Using Services<Additional service>When a new network service is added by DOCOMO, you can add the service to the menu and use the service. Adding new services and response messages1i“SERVICE”“Additional service”Select any item: Additional service……Adds new services. Highlight “<Not stored>”u (FUNC)“Add new service”Enter the service nameSelect any item: You can enter up to 10 double-byte or 20 single-byte characters for the service name. Enter number……Uses the number to connect. You can enter up to 20 digits. Enter USSD number……Uses the service code to connect. You can enter up to 40 digits. • About the function menu of the “Additional service” screen which appears when “Additional service” is selected →p.324Additional guidance……Registers the response messages for the commands posted from the network when using the added network service with “USSD” (service code). Highlight “<Not stored>”u (FUNC)“Add new guidance”Enter the commandEnter the response message name“YES”You can enter up to 20 digits for the command and you can enter up to 10 double-byte or 20 single-byte characters for the response message. • About the function menu of the “Additional guidance” screen which appears when “Additional guidance” is selected→p.324Additional service screen (p.324)/Additional guidance screen (p.324)Add new service・Add new guidance……Adds a setting. Edit……Changes the setting. Delete this・Delete all……Deletes one or all additional service(s) or additional guidance(s). Using the newly added service1i“SERVICE”“Additional service”“Additional service”2Select a serviceo (Send)N<Additional service>zTo use the service, enter the “number” or “service code” provided by DOCOMO. The “number” is the number used to connect to the service center. The “service code” (USSD) is the code used for notifying the service center.

325PC ConnectionData Communication ...................................................................................................... 326Before Using ................................................................................................................... 327Checking the Procedure ................................................................................................. 328AT Commands ................................................................................................................ 329CD-ROM ......................................................................................................................... 329DOCOMO keitai datalink ................................................................................................ 329For details on the data communication, refer to the “Manual for PC Connection” (PDF format) in the provided CD-ROM or DOCOMO’s website. To view the PDF-format “Manual for PC Connection ”, Adobe® Reader® is required. If this software is not installed on your PC, install the Adobe® Reader® in the provided CD-ROM. Refer to the “Adobe Reader ヘルプ” (Help of the Adobe Reader) for details on how to use it.

326PC ConnectionData CommunicationData communication available on the FOMA terminalAvailable data communication between the FOMA terminal and PCs is classified in 3 categories: data exchange (OBEX™ connection), packet communication and 64K data communication.Data exchange (OBEX™ connection)You can exchange data such as images, music, phonebook and mail between the other FOMA terminal or PC, etc. Packet communicationPacket communication is charged according to the amount of data sent and received*1, and the data is received at the maximum speed of 3.6 Mbps*2 and sent at the maximum speed of 384 kbps. You can also access a corporate LAN connected to the FOMA network. Use an access point that supports FOMA packet communication, such as DOCOMO Internet connection service “mopera U” or “mopera”. Packet communication is performed via the FOMA USB Cable with Charge Function 01/02 (optional) to a PC or via a dedicated cable connection to a PDA. *1: Note that the communication charge can become very expensive when large files are sent and received. *2: The communication speed is 384kbps at maximum for both sending and receiving in the following cases: • When you are outside the FOMA HIGH-SPEED area• When you use access points for “mopera”• When you use packet communication with DOCOMO PDA “sigmarion Ⅲ” or “musea”64K data communicationRegardless of the data amount, 64K data communication is charged according to the length of time the line is connected. *Use an access point that supports FOMA 64K data communication, such as DOCOMO Internet connection service “mopera U” or “mopera”, or ISDN synchronized 64K access point. 64K data communication is performed via the FOMA USB Cable with Charge Function 01/02 to a PC or via a dedicated cable connection to a PDA.• 64K data communication is not available for overseas service.• When performing packet communications overseas, use the IP connection (the PPP connection is not available for packet communications).* : Note that the communication charge can become very expensive when the line is connected for a long time. PC SO706iPCSO706iInfrared data exchange (p.257)iC commu-nication (p.259)FOMA USB Cable with Charge Function 01/02microSD card (p.243)DOCOMO keitai datalink (p.329)

327PC ConnectionNotice before usingInternet service provider feesIn addition to FOMA service charges, you may need to pay user fees to an Internet service provider to use the Internet. These fees must be paid directly to the Internet service provider in addition to service fees of FOMA service. Contact your Internet service provider for details. DOCOMO Internet connection service “mopera U” or “mopera” is available. “mopera U” is a pay service for which you need to apply. “mopera” is a free service for which you do not need to apply. Setting an access point (e.g. Internet service provider)Packet communication and 64K data communication use different access points. If you are using packet communication, use an applicable access point for it; if 64K data communication, use an access point for FOMA 64K data communication or ISDN synchronized 64K. • You cannot use DoPa access points. User authorization when accessing networkSome access points may require your user authorization (ID and password) when connecting. Use communication software (Dial-up network) to enter your ID and password. ID and password will be provided by your Internet service provider or the network administrator. Contact the Internet service provider or administrator for details. Access authorization when using a browserWhen using FirstPass compliant sites on your PC’s browser, FirstPass (user certification) for access authorization is required. Install the FirstPass PC software from the CD-ROM packaged provided with this product and conduct the setting. For details, refer to “FirstPass Manual” (PDF format) stored in the “FirstPassPCSoft” folder included on the CD-ROM. (The “FirstPass Manual” is in Japanese.) Before Using Operational environmentThe PC operation environment to use data communication is as shown below: *1: Operations after the OS upgrade are not covered by the warranty. *2: May differ depending on the PC’s system configuration. Item DescriptionPC unit • PC/AT compatible model with CD-ROM drive• USBUSB port (compliant to Universal Serial Bus Specification Rev1.1/2.0)• Display resolution of 800 dots wide × 600 dots high, High Color (65,536 colors) is recommendedOS*1 • Windows 2000, Windows XP, Windows Vista (Japanese versions)Required memory• Windows 2000: 64M bytes or more*2• Windows XP: 128M bytes or more*2• Windows Vista: 512M bytes or more*2Hard disk space• 5M bytes or more*2NzYou can transmit data with the FOMA SO706i connected to the DOCOMO PDA “musea” or “sigmarionⅢ”. Update “musea” to connect them to the FOMA SO706i. For how to update it and other details, visit the DOCOMO website. zThe FOMA SO706i is not compatible with Remote Wakeup function. zThe FOMA SO706i is not compatible with the FAX communication.

328PC ConnectionRequired devicesThe following hardware and software, in addition to the FOMA terminal and a PC, are required. • FOMA USB Cable with Charge Function 01/02 (optional) or FOMA USB Cable (optional)• Bundled CD-ROM “CD-ROM for FOMA SO706i”Checking the ProcedureIn data communication, the connection is made through a dial-up connection with Internet service providers or LANs that support FOMA data communication. ■About the software provided in the provided “CD-ROM for FOMA SO706i”zThe CD-ROM contains the SO706i Communication setting file (drivers), FOMA PC setting software and FirstPass PC software. zThe FOMA Communication setting file is software (driver) required for connecting the FOMA terminal with a PC via the FOMA USB Cable with Charge Function 01/02 (optional) to carry out packet communication, 64K data communication or data transfer (OBEX™ connection). Installing the FOMA Communication setting file embeds each driver into Windows. Using the FOMA PC setting software, you can easily set up packet communication and 64K data communication and create a dial-up connection. Flow chart for completing the data communication setup ■Data exchange (OBEX™ connection)When you use the FOMA USB Cable with Charge Function 01/02 (optional), you have to install “FOMA通信設定ファイル” (FOMA Communication setting file). * Install DOCOMO keitai datalink (p.329) in addition. ■Packet communication/64K data communication* : To use Internet with the FOMA terminal and PC connected, “mopera U” (separate subscription is required) is useful, which supports broadband connection, etc. Consider the plan in which you are charged only in a month when you use the service. If you use “mopera” for which you do not need a subscription, you can access Internet immediately. For more information, visit the DOCOMO website. NzPurchase the specified “FOMA USB Cable with Charge Function 01/02” or “FOMA USB Cable”. The USB cable for PC cannot be used because the shape of the connector is different. zUSB HUB may not function correctly. Install FOMA Communication setting file in the provided CD-ROM or download and install it from the DOCOMO websiteData exchangeDownload and Install the FOMA Communication setting fileThe set up procedures for packet communication, 64K data communication and set up without the FOMA PC Setting Software are different.Set up*Connect/DisconnectTo set up the access point using the FOMA PC Setting SoftwareTo set up the access point without using the FOMA PC Setting SoftwareInstall the FOMA PC Setting SoftwareInstall FOMA Communication setting file in the provided CD-ROM or download and install it from the DOCOMO websiteDownload and Install the FOMA Communication setting file

329PC ConnectionAT CommandsAT commands are commands for controlling modem, etc. The FOMA terminal complies AT commands and supports some enhanced commands and its own AT commands. For details on AT commands to set the FOMA terminal functions from your PC, refer to the “Manual for PC Connection” (PDF format) in the provided CD-ROM. CD-ROMThe provided CD-ROM contains the software for using the data communication with the FOMA terminal, “Manual for PC Connection” and “Kuten Code List” (PDF). For details, refer to the provided CD-ROM. Supplied software/PDFThe provided CD-ROM contains the following software/PDF: • FOMA Communication setting file• FOMA PC設定ソフト (FOMA PC setting software)•FOMA バイトカウンタ (FOMA byte counter)• Guide to DOCOMO keitai datalink• Guide to i-mode.net notifier• FirstPass PCソフト (FirstPass PC software)• Guide to mopera U (mopera U start up tool/mopera U connection & setting tool/FOMA byte counter/mopera U requesting original data)• Guide to Napster®•“パソコン接続マニュアル”/“Manual for PC Connection” (PDF)•“区点コード一覧 ”/“Kuten Code List” (PDF)• Declaration of Conformity (DoC)• Adobe® Reader® DOCOMO keitai datalink“DOCOMO keitai datalink” (Japanese) is the software which enables you to back up your “Phonebook”, “Mail”, etc. on the FOMA terminal on a PC and edit the data. This software is provided on the DOCOMO website. For details and downloading, see the following website. You can also access to the following website from the provided CD-ROM. http://datalink.nttdocomo.co.jp/ (Japanese)The following warning screen may appear when you insert the CD-ROM into a PC. This warning is displayed according to the security setting of the Internet Explorer and does not affect the usage of the software. Click “はい ” (Yes). * The screen is the example when Windows XP is used. The displayed screen may be different depending on the PC environment. For details such as downloading method, transferable data, operating environment of each OS, installing method, operations and restrictions, see the above website. As for the operations after the installation, refer to the help files of the software. You need “USB Cable (optional)” to use DOCOMO keitai datalink.

331Overseas UseOverview of International Roaming (WORLD WING) ..................................................... 332Available Services........................................................................................................... 333Before Using the FOMA Terminal Overseas................................................................... 333Making a Call Abroad ..................................................................................................... 335Receiving a Call Abroad ................................................................................................. 336Setting the Network Connection Switching Method................................. 336Setting the Search Mode of the Operator .............................................. 336Displaying the Roaming Operator’s Name...................................... 337Commencing Roaming Guidance........................................................... 338Setting to Bar Incoming Calls During Roaming ........................... 338Network Services During Roaming............................................................... 3383G/GSM settingNW search modeDisplay operator nameRoam. GuidanceBar incoming when roamService(Int.)

332Overseas UseOverview of International Roaming (WORLD WING)International roaming (WORLD WING) is a service that allows you to make/receive calls or use i-mode through the network of roaming service operator overseas. zYou can use the FOMA SO706i within the roaming area of DOCOMO overseas. For details on the service area and charge, see the DOCOMO “International Services Website”.zThere are 3 international networks: 3G network, GPRS network and GSM network.• 3G network is the 3rd generation mobile network compliant with the 3GPP*1 global standard.• The GPRS*2 network is a 2.5th-generation mobile communication network enabling high-speed packet communications by GPRS on the GSM network.• The GSM*3 network is a 2nd-generation digital-type mobile communication network most popular throughout the world.*1: 3GPP (3rd Generation Partnership Project) A regional standardization body established to develop commonly applied technical specifications for 3rd-generation mobile communications systems (IMT-2000).*2: GPRS (General Packet Radio Service)Implements high-speed GSM and facilitates data communications including packet communications.*3: GSM (Global System for Mobile Communications)A 2nd-generation digital-type mobile communication network most popular throughout the world.■Country codes of main countriesEnter the following country codes when using international call or setting “Country code” in “Int’l dial assistance”. (as of May, 2008)* For other country codes and details, see the DOCOMO “international Services Website”. AreaCodeAreaCodeAustralia 61 Korea 82Austria 43 Macau 853Belgium 32 Malaysia 60Brazil 55 Maldives 960Canada 1 New Caledonia 687China 86 New Zealand 64Czech 420 Norway 47Egypt 20 Peru 51Fiji 679 Philippines 63Finland 358 Russia 7France 33 Singapore 65French Polynesia 689 Spain 34Germany 49 Sweden 46Greece 30 Switzerland 41Holland 31 Taiwan 886Hong Kong 852 Thailand 66Hungary 36 Turkey 90India 91 United Kingdom 44Indonesia 62 United States of America1Italy 39Japan 81 Vietnam 84

333Continued on next pageOverseas UseAvailable ServiceszSome services may not be available depending on the operator or area. zFor details on communication services available during international roaming, refer to the international service guide such as “Mobile Phone User’s Guide [World Services]”. ■Available communication services overseas*1: Outgoing calls using Number B of 2in1 is not available (when receive a call for Number B, some operators cannot recognized to which number the call was made). You cannot make a call from the additional number of multi number. *2: International videophone calls are available with users of specific roaming operators overseas or FOMA terminals in Japan. *3: The automatic update will be automatically paused when a roaming operator is connected. To resume the i-Channel automatic update, it is required to set the i-Channel setting again. However, you are charged for the packet communication in addition to the monthly charge. In addition, when you automatically update information on “Basic Channel”, the packet communication charges will apply.■Displayed iconsA network in use and its status appear in the task icon display area (p.27).Before Using the FOMA Terminal OverseaszBefore using the FOMA terminal overseas, also refer to the “Mobile Phone User’s Guide [Network Services]” and “Mobile Phone User’s Guide [World Services]”. zFor the customers who have subscribed to the FOMA service on September 1, 2005 or after, a separate subscription is not necessary. However, customers who declared that they did not require this service at the FOMA service subscription or who unsubscribe from this service need a separate subscription. zFor the customers who have subscribed to the FOMA service on August 31, 2005 or before without subscribing to “WORLD WING”, a separate subscription is necessary. zTo use the international roaming service, the FOMA card (other than blue) which is compatible with WORLD WING must be inserted. zThis service is not available in some payment plans.zUsage charges for the overseas services are included in your monthly bill of FOMA services. However, it may be charged in subsequent month due to the conditions of the roaming operator overseas.zThe call charge in “Call data” includes both incoming and outgoing calls. However, the displayed call charge may differ from the actual one, or “￥＊＊” may be displayed.■Battery pack charging• Precautions for handling the AC adapter→p.19“Handling the Adapter (including the Charger)”• Charging with the AC adapter→p.41“Charging”Network3G GPRS GSMMake/Receive a voice call○*1○*1○*1Make/Receive a videophone call○*1*2××Use i-mode (including Full Browser)○○×Receive MessageR ○○×Send/Receive i-mode mail○○×Packet communication via PC○○×Send/Receive SMS ○○○i-Channel ○*3○*3×NzDuring international roaming, you cannot receive MessageF, receive Area Mail, send/receive Chaku-moji, “Pattern data update” and “Set auto-update” of Scanning function, update software, use 64K data communication connected with a PC or ON in 2in1 setting. Icon Meaning/ Only dialing available/Only packet transmission available, when using the domestic FOMA network/ / Only dialing available/Only packet transmission available/Both dialing and packet transmission available, when using the overseas 3G network/ / Only dialing available/Only packet transmission available/Both dialing and packet transmission available, when using the overseas GSM/GPRS network

334Overseas Use■Viewing i-mode sitesTo view i-mode sites from overseas, set “International Settings” from “iMenu” beforehand.• For details, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. ■Network ServicesYou can also use network services such as the Voice Mail service and Call Forwarding service if you have subscribed to these network services. zBefore using the network services overseas, “Remote Control” (p.318) must be set to “Activate”. zEven when the operation such as Activate or Deactivate is available, the services may be restricted or unavailable. For details, refer to the “Mobile Phone User’s Guide [Network Services]” and the international service guide such as “Mobile Phone User’s Guide [World Services]”, etc. ■SMSThis service allows you to exchange text messages with subscribers to overseas carriers other than DOCOMO.zTo send an SMS to a user of a roaming operator overseas, enter “+” and the country code in front of the phone number (when the phone number begins with “0”, omit the first “0”). You can also send SMS by entering “010”, the country code, the other party’s phone number in this order. (To reply to received SMS from overseas, enter “010”.)zWhen sending a SMS to a user of a roaming operator overseas and a character contained in SMS is not supported by the other party’s mobile phone, the character may not be properly displayed. See international service guides such as “Mobile Phone User’s Guide [World Services]” for details. ●Inquiries overseasFor inquiries overseas such as lost, stolen, charge accumulation or malfunction, refer to “For lost, stolen, accumulated amount settlement overseas” or “For malfunction overseas” on the back cover of this manual. Note that you are charged for the call and communication even after the FOMA terminal is lost or stolen.zFor the latest information, see the DOCOMO “International Services Website”.■International call access code of main countries (Table 1)(as of March, 2008)* Charges apply for calls made to Japan.■International Prefix number for the universal number (Table 2)(As of March, 2008)* Note that the universal numbers may not be available from mobile phones, public phones or hotels. Area Code Area CodeAustralia 0011 Macau 00Belgium 00 Malaysia 00Brazil 0021/0014Monaco 00New Zealand 00Canada 011 Norway 00China 00 Philippines 00Czech 00 Poland 00Denmark 00 Portugal 00Finland 00 Russia 810France 00 Singapore 001Germany 00 Spain 00Greece 00 Sweden 00Holland 00 Switzerland 00Hong Kong 001 Taiwan 002Hungary 00 Thailand 001India 00 Turkey 00Indonesia 001United Arab Emirates00Ireland 00 United Kingdom 00Italy 00 United States of America011Korea 001Luxemburg 00 Vietnam 00Area Code Area CodeArgentina 00 Korea 001Australia 0011 Luxemburg 00Austria 00 Malaysia 00Belgium 00 New Zealand 00Brazil 0021 Norway 00Bulgaria 00 Peru 00Canada 011 Philippines 00China 00 Portugal 00Colombia 009 Singapore 001Denmark 00 South Africa 09Finland 990 Spain 00France 00 Sweden 00Germany 00 Switzerland 00Holland 00 Taiwan 00Hong Kong 001 Thailand 001Hungary 00 United Kingdom 00Ireland 00 United States of America011Israel 014Italy 00

335Overseas Use* The universal numbers are available only in the above countries. * If you make a call from a hotel, the fees may be charged by the hotel. Check with the hotel before using. * From mobile phones, domestic charges apply in the country.Use in the local areaThis FOMA SO706i is available in 3G, GPRS and GSM roaming areas. When the FOMA terminal is turned on after you arrive in the destination overseas, a local roaming operator is automatically set. ●Display, date and timeWhile using the FOMA terminal overseas, the name of the operator connected appears on the standby screen. z“Displaying the Roaming Operator’s Name” →p.337zRegardless of “Set main time” setting, the received address list are time stamped as the date and time in Japan standard time. zWhen “ ” remains on the screen, set “NW search mode” to “Auto”. It may take some time to search network just after turning on the FOMA terminal and “ ” may appear while searching. zIf the used network or operator does not notify the caller ID, the caller ID does not appear on the FOMA terminal screen and displays “Unknown” or “withholding” even when the caller ID is notified. The FOMA terminal screen also displays “Unknown” even when “Caller ID Request Service” is set. ●After returning to JapanAfter returning to Japan and turning on the FOMA terminal, the network will be automatically searched and set to the FOMA network (DoCoMo). “Setting the Search Mode of the Operator”→p.336Making a Call AbroadYou can use the international roaming service to make voice or videophone calls from abroad. Making a local call abroadTo make a call, dial the phone number of the other party’s ordinary phone or mobile phone as making a call in Japan. →p.48zThe “Int’l dial assistance” message may appear when you use the phonebook to make a call. Select “Original phone No.”. Making a call to outside your destination country (including Japan)1On the standby screen, dial the following; + (0 (1 second or longer))→Country code→Area code (Long distance code)→The other party’s phone numberIf the area code (long distance code) begins with “0”, omit the first “0”. However, to call to ordinary phones in Italy, “0” may be required. 2r (voice call)/o (V.phone)●Making a call to a country stored in “Country Code setting” in the “Int’l dial assistance”You can easily dial the number by storing the country name and codes of a party you often call to “Int’l dial assistance”. zYou can also make an international call from the phonebook, Redial or Dialed calls record. 1Enter the phone number of the other partyu (FUNC)“Int’l call”Select a countryr (voice call)/o (V.phone)“+” and “Country code” is prefixed and an international call is made.

336Overseas Use●Making a call to a country set in “Auto int’l call set.” under “Int’l dial assistance”zYou can also make an international call from the phonebook, Redial or Dialed calls record.zOnly available when the phone number begins with “0”. zSet “Auto int’l call set.” under “Int’l dial assistance” to “ON”. 1Enter the phone number of the other partyr (voice call)/o (V.phone) “Dial”Making a call to the overseas user of WORLD WINGWhen the other party is using the international roaming, make a call as an international call to Japan (dial “81” (Japan) as the country code) even when the other party is in the country you are staying. Receiving a Call AbroadYou can use the international roaming service to receive a call without changing the phone number. →p.59Setting the Network Connection Switching Method <3G/GSM setting>Set the method of switching the network accessed overseas.1i“SETTINGS”“Int’l roaming set”“3G/GSM setting”Select any item:AUTO……Automatically switches between the 3G network and GSM/GPRS network.3G……Fixes to the 3G network.GSM/GPRS……Fixes to the GSM/GPRS network.Setting the Search Mode of the Operator<NW search mode>When you move out of the service area of the operator you are using, the FOMA terminal is reconnected to another operator’s network. zThis function may not be set depending on the conditions of radio waves or networks. zAs of January 2008, no service provider other than NTT DOCOMO can be selected in Japan. zWhen “ ” appears when you return to Japan, check that “NW search mode” is set to “Auto”. Changing the operator manually1i“SETTINGS”“Int’l roaming set”“NW search mode”“Display ON” or “Display OFF”The “NW search mode” screen appears. 2“Manual”Select an operator■To switch the operator automatically“Auto”You can set an operator to be preferably connected when searching the operator automatically.→p.337NzWhen you receive a call while using international roaming services, the call is sent to your usual mobile phone number in Japan and then forwarded to your travel destination no matter from which country the call originates. The caller has to bear charges for calls to Japan, and you have to bear incoming call charges including international forwarding charges. The other party’s procedure to make a call■To have the other party make a call from Japan to your destination countryTo have the other party make a call from Japan to your FOMA terminal in your destination country, the other party only needs to dial the phone number as in Japan. 090 (or 080)-XXXX-XXXX■To have the other party make a call from outside Japan to your destination countryThe other party needs to dial the international access code and “81” (country code of Japan) no matter whether you are in Japan or overseas. International access code-81-90 (or 80)-XXXX-XXXXNzSet “AUTO” or set according to the network to be accessed overseas.NW search mode

337Overseas UseRe-searching for the network<Network re-search>zYou can re-search for a network then connect to the network if “NW search mode” is set to “Auto” and an operator could not be searched for, or if “NW search mode” is set to “Manual” and you want to change operators. 1NW search mode screen (p.336) “Network re-search”Select an operator■When “NW search mode” is set to “Auto”“Network re-search”Setting an operator to be preferably connectedYou can set an operator to be preferably connected when searching or re-searching the network automatically. zThe PLMN network list can store up to 20 operators. zOperators designated by DOCOMO are stored to the PLMN network list. 1NW search mode screen (p.336) “PLMN setting”The “PLMN setting” screen appears. Operators are listed in the priority order. 2Highlight the operator whose priority is to be changedu (FUNC) “Change priority”3Highlight the position to move tod (Select)The selected operator moves to the position above the highlighted item. Select “<last>” to move to the end. 4o (Finish)“YES”PLMN setting screen (p.337)PLMN manual select……Enters and stores Country code (Operator Code (MCC)) and Network code (Operator Code (MNC)). PLMN select……Selects and stores the operator from the list. Set VPLMN to PLMN……Stores the currently selected operator. Change priority→p.337Delete……Selects the deleting method from “Delete this/Delete selected/Delete all”. “About multiple-choice”→p.38Displaying the Roaming Operator’s Name<Display operator name>You can set whether to display the name of the currently connected operator on the display during the international roaming. 1i“SETTINGS”“Int’l roaming set” “Display operator name”“Display ON” or “Display OFF”PLMN settingFunction menup.337NzThe priority may not apply depending on the conditions of radio waves or networks. NzEven when set to “Display ON”, the name of the operator is not displayed when you are in Japan (in the FOMA network). zWhen “NW search mode” is set to “Manual” and the FOMA terminal is in “ ” area, “select net” appears.

338Overseas UseCommencing Roaming Guidance<Roam. Guidance>You can set the FOMA terminal to notify the other party that you are roaming internationally when you receive a voice call or videophone call during international roaming. zMake the setting in Japan. 1i“SERVICE”“Roam. Guidance” Select any item: Activate・Deactivate……Activates or deactivates the roaming guidance. Check setting……Checks the setting. Setting to Bar Incoming Calls During Roaming<Bar incoming when roam>zDepending on the operator overseas, the setting may be unavailable.1i“SERVICE”“Bar incoming when roam”Select any item: Activate……Selects from “Bar All incoming” (bars all incoming calls) or “Data calls Barring” (bars incoming videophone calls and 64K data communications*) The network security code (p.100) is required for the setting. Deactivate……Deactivates the barring of incoming calls when roaming. The network security code (p.100) is required for deactivating. Check setting……Checks the setting. * : 64K data communication is not available on FOMA SO706i during international roaming. Network Services During Roaming<Service(Int.)>zYou can use some network services such as “Voice Mail” or “Call Forwarding” overseas. zTo use “Voice Mail(Int.)” or “Call Forwarding(Int.)”, the subscription to “Voice Mail” or “Call Forwarding” is required beforehand. Also, “Remote Control” must be set beforehand. zYou cannot perform the setting when “ ” is displayed. zWhen you perform the operation overseas, you must bear the international call charges of the country you are staying. zFor details on the network services, refer to the “Mobile Phone User’s Guide [Network Services]” and “Mobile Phone User’s Guide [World Services]”, etc. 1i“SERVICE”“Service(Int.)”Select any item: Voice Mail(Int.)Activate・Deactivate・Play messages・Set ring time・Setting……Follow the audio guidance to specify the setting. Call Forwarding(Int.)Activate・Deactivate・Setting……Follow the audio guidance to specify the setting. Roam. Guidance(Int.)……Specify the settings by following the audio guidance. Remote access(Int.)……Specify the settings by following the audio guidance. Caller ID req.(Int.)……Specify the settings by following the audio guidance. NzEven when the guidance is not set, the other party hears the ring tone set by the operator. zThe caller may hear the guidance in a foreign language depending on the conditions of the operators overseas.

339Appendix/ExternalDevices/TroubleshootingMenu Function List ......................................................................................................... 340Character Assignment to Dial Keys ................................................................................ 350Symbols and Special Characters.................................................................................... 352Pictographs .....................................................................................................................353Face Marks ..................................................................................................................... 358Common Phrases ........................................................................................................... 359Multi Access Combination Patterns ................................................................................ 360Multitask Combination Patterns ...................................................................................... 361Services Available for the FOMA Terminal ..................................................................... 362Options and Accessories ................................................................................................ 363■Using the FOMA Terminal with External DevicesMovie Playing Software .................................................................................................. 363■TroubleshootingMalfunction Checklist...................................................................................................... 364If Any Error Message Appears........................................................................................ 368Warranty and After-Sales Service .................................................................................. 375i-mode Malfunction Check Site ....................................................................................... 377Updating Software .................................................................................. 377Protecting the FOMA Terminal from Harmful Data ............................... 383Specifications..................................................................................................................385Number of Data that can be Stored/Registered/Protected on the FOMA Terminal ........ 386Specific Absorption Rate of Mobile Phones, etc............................................................. 387Export Administration Regulations ................................................................................. 394Software UpdateScanning function

340Appendix/External Devices/TroubleshootingMenu Function ListzThe settings with are restored to the default settings by “Reset settings”. zRefer to the Table 1 (p.348) for details of the reset settings of ① to ⑭ and other functions. zThe key operation which uses menu numbers is available only when the main menu is set to “Standard Menu”.→pp.32, 33Main item Sub item Branch itemMenu No. (Key operation)Default setting Ref. pageMAIL Inbox −−p.170Outbox −−p.170Draft −−p.161Compose message −−p.156WEB mail −−p.157Compose SMS −−p.182Check new messages u (1 second or longer)−p.164Receive option −−p.164Check new SMS −−p.184Te m p l a t e −−p.159Mail settings −−p.178I-MODE iMenu −−p.136Bookmark −−p.142Screen memo −−p.143URL history −−p.138Go to location −−p.141Full Browser −Specified URL http://www.google.co.jpp.218i-Channel p−p.153MessageR/F −−p.180Check new messages u (1 second or longer)−p.164Client certificate −−p.150i-mode settings −−p.148I-APPLI Software list o(1 second or longer)−p.187microSD −−p.200Auto-start set −−p.197i-αppli action info −−p.189SETTINGSKisekae Tool setting −−p.97Incoming callRing volume i50 Phone to MessageFAll Level 4 p.61Select ring tone i13 Phone 着信音 1 p.82Videophone 着信音 1Mail 着信音 1MessageR/MessageF着信音 1Sound effect i64Stereo&3D soundON p.84Vibrator i54Phone to MessageFAll OFF p.84Manner mode set i20 Manner mode (Original settings: Default→p.88)p.86

341Continued on next pageAppendix/External Devices/TroubleshootingSETTINGSIncoming callDisp. Phonebook image−ON p.89Answer setting i58 Any key answer p.60Mail/Msg. ring time i68 Mail to MessageFAll ON (Ring time: 5 seconds) p.85Ring time(sec.) i90 Set mute secondsOFFMute seconds: 1 sec (Set mute seconds is set to “ON”)p.114Missed calls displayDisplayInfo notice setting i65 In Japanese display: ボイス (Voice) (名前通知 (Name notification) : OFF)In English display: ONp.64Record message i55 OFFAnswer message: Japanese 1(When Record message is set to “ON”)Ringing time: 13 seconds(When Record message is set to “ON”)p.64Disp. call/receive No. −White (phone color: Onyx Black)Black (phone color: Pink Gold, Platinum White)p.90Melody Call setting −−p.84Talk Noise reduction i76 ON p.58Quality alarm i75 No tone p.85Reconnect signal i77 No tone p.58Set hold tone −On hold tone To n e 1 p.62Setting when folded i18 End the call p.61Dialing Pause dial i84 −p.57Sub-address setting −ON p.58Prefix setting −“WORLD CALL” (009130010)User setting: Not recordedp.57Headset sw to dial −OFF p.298Int’l dial assistance −Auto int’l call set. ON (automatically added) p.52Country Code setting“日本” (Country code: 81) 22 country codes are already stored. IDD Prefix setting“WORLD CALL” (009130010)User setting: Not recordedVideophoneVisual preference −Normal p.67Select image −On hold Pre-installed p.67Holding Pre-installedSubstitute image Chara-den ( ミッフィー )Record message Pre-installedPreparing Pre-installedVoice m emo Pre-installedAuto redial as voice −OFF p.67Display setting −Main display Other side p.67Ntfy switch-mode −Indication ON p.67Hands-free switch −ON p.67Main item Sub item Branch itemMenu No. (Key operation)Default setting Ref. page

342Appendix/External Devices/TroubleshootingSETTINGSVideophoneV-phone while packet −V-phone priority p.67Display Display setting i56 Stand-by display Pink (phone color: Pink Gold), White (phone color: Platinum White), Black (phone color: Onyx Black)p.88Wake-up displayウェイクアップMessage: Not storedDialing, V.phone Dialing発信中１ (phone color: Pink Gold), 発信中２ (phone color: Platinum White), 発信中３ (phone color: Onyx Black)Calling, V.phone Calling着信中１ (phone color: Pink Gold), 着信中２ (phone color: Platinum White), 着信中３ (phone color: Onyx Black)Mail sending メール送信中１ (phone color: Pink Gold), メール送信中２ (phone color: Platinum White), メール送信中３ (phone color: Onyx Black)Mail receiving メール受信中１ (phone color: Pink Gold), メール受信中２ (phone color: Platinum White), メール受信中３ (phone color: Onyx Black)Check new messages問合わせ中１ (phone color: Pink Gold), 問合わせ中２ (phone color: Platinum White), 問合わせ中３ (phone color: Onyx Black)Mail rec’d result メール受信結果画面１ (phone color: Pink Gold), メール受信結果画面２ (phone color: Platinum White), メール受信結果画面３ (phone color: Onyx Black)Backlight i70 Lighting ON (lighting) + Saver (Light time: 2 minutes)p.90Charging StandardArea LCD+KeysBrightness ON+MiddleDisplay design i86 Color pattern Red (phone color: Pink Gold), White (phone color: Platinum White), Black (phone color: Onyx Black)p.91Icon pattern Battery icon/Antenna iconPattern 2 (phone color: Pink Gold), Pattern 3 (phone color: Platinum White), Pattern 4 (phone color: Onyx Black)Soft key Pattern 1 (phone color: Pink Gold), Pattern 2 (phone color: Platinum White), Pattern 3 (phone color: Onyx Black)Font i66 Font type Gothic p.93Thickness BoldCharacter size StandardMain item Sub item Branch itemMenu No. (Key operation)Default setting Ref. page

343Continued on next pageAppendix/External Devices/TroubleshootingSETTINGSDisplay My shortcut i63 Standard (1Seg, Photo mode, My selection)p.94Select language i15 Japanese p.45My selection i52 Receive Ir dataBar code readerAlarmIllumination setShield viewDictionaryp.92Menu display set i57 Menu display List p.91Theme Lacy Pink (phone color: Pink Gold), Plain White (phone color: Platinum White), Seductive Black (phone color: Onyx Black)Memory focus ONReset menu op. log−Viewer settings −9 images p.226Icons description i36 −p.28Icons setting −ON p.96Shield view 2 (1 second or longer)OFF p.90Mail ticker −Display sender p.216Illumination set i93 Dialing ON p.92Incoming Call Pattern: FlowColor: Citrine orangeIncoming V.phonePattern: FlowColor: Citrine orangeCall light Pattern: OFFColor: −Mail receiving Pattern: FlowColor: Light purpleMail sending Pattern: FlowColor: Pink tourmalineMissed mail ONMissed call ONOpen phone Pattern: TwinsColor: Pink tourmalineClose phone Pattern: TwinsColor: Pink tourmalinePower ON ONPower OFF ONCharging start Pattern: Slow BeatColor: Pink tourmalineCharging end Pattern: Slow BeatColor: Pink tourmalineTo D o Pattern: SlideColor: Pink tourmalineSchedule/Alarm Pattern: SlideColor: Pink tourmalineTime cycle: 60 minutesTime signal Pattern: SlideColor: Pink tourmalineMain item Sub item Branch itemMenu No. (Key operation)Default setting Ref. page

344Appendix/External Devices/TroubleshootingSETTINGSIllumination set i93 Exchanging data ON p.92Play sound ONActivate 1Seg ONCall time/ ChargeCall data i61 −p.293Notice designate calls −Cost limit setting Not set p.294Notify cost limit OFFAlarm tone Alarm ToneVolume Level 4Reset total i60 −p.294Auto reset total cost −OFF p.294Clock Set main time i31 Auto time adjust Auto p.46Summer time OFFSet sub clock −display method Auto p.46Summer time OFFClock display i39 Style 12h clock (phone color: Pink Gold, Platinum White), 24h clock (phone color: Onyx Black)p.93Size Small (phone color: Pink Gold), OFF (phone color: Platinum White, Onyx Black)Color Black (phone color: Pink Gold, Platinum White), White (phone color: Onyx Black)Alarm setting −Alarm preferred p.289Clock Alarm Tone set −Alarm Tone p.85Auto power ON −Inactive p.45Auto power OFF −InactiveLock/SecurityLock −Dial lock Release p.101−Original lock 1 to 3Release p.106Group and item settingsData disp. Edit del.: All selectedDial/sending mail, Incoming/Mail disp.: All deselectedIC card lock setting w(1 second or longer)IC card lock OFF p.206−IC lock (power-off)MaintainKeypad lock −After folded OFF p.110−Timer OFFSelf mode −Release p.115Secret mode i40 Release p.103Secret data only mode i41 ReleaseReject unknown −Accept p.114Call setting w/o ID i10 Unknown to User unsetAll AcceptSelect ring tone: Same as normal ring toneSelect calling disp.: Same as normal displayp.114Change security code i29 0000 (4 zeros) p.101Main item Sub item Branch itemMenu No. (Key operation)Default setting Ref. page

345Continued on next pageAppendix/External Devices/TroubleshootingSETTINGSLock/SecurityIC card authentic. −OFF p.111Ext. IC card: Not setPIN setting −−p.101Scanning function −Set scan Scan: ON p.383Message scan: ONi-mode common setSet connection timeout−60 seconds p.149Set check new messages−Mail to MessageFAll checked p.179Host selection i81 i-modeUser setting: Not recordedp.149SMS center selection −DoCoMoUser setting: Not recordedp.184Certificate −All Valid p.149Certificate host −DoCoMoUser setting: Not recordedp.151i-αpplisettingsDisp. Software info −Not display p.186End stand-by display −−p.199i-αppli vol. −Level 4 p.189External connectionUSB mode setting −Communication mode p.251Headset usage setting i51 Headset+speaker p.85Select microphone −External microphone p.298Auto answer setting i94 Phone OFF p.299VideophoneInt’l roaming setNW search mode −Auto p.3363G/GSM setting −AUTO p.336Display operator name −Display ON p.337Other settingsKeypad sound i30 ON p.85Charge sound −ON p.85Battery level i71 −p.44Side key guard iw (1 second or longer)OFF p.112Character input set i35 Input mode 5-touch p.303Auto cursor 1(Slow) p.306Select conversionPrediction p.303CHG input size Standard p.303Operation in item ↑↓←→ Key p.305Clear learned −p.310Holding down ch-key −Camera p.284Reset settings i23 −p.299Initialize −−p.300Software Update −Set auto-update Auto-updateDate: EverydayTime: 03:00p.377Main item Sub item Branch itemMenu No. (Key operation)Default setting Ref. page

347Continued on next pageAppendix/External Devices/TroubleshootingSERVICE 2in1 setting 8 (1 second or longer)Set call/receive No.Disp. call/receive No.Number A: White (phone color: Onyx Black)/Black (phone color: Pink Gold, Platinum White)Number B: GrayRingtone for Number BVoice call (recv.)Ring tone: 着信音 2Other than above: Same as Number AV. phone (recv.)Ring tone: 着信音 2Other than above: Same as Number AMail (recv.)Ring tone: 着信音 2Other than above: Same as Number Ap.3222in1 function OFF−Rcv. avoid. setting−Nuisance Call Blk −−p.315Caller ID Request −−p.316Incoming Call Mng −Answer p.317Set in-call arrival −−p.317Remote Control −−p.318Dual Network −−p.316English Guidance −−p.316Additional service −−p.324Service Numbers −−p.317Multi Number −Select ring tone Same as normal ring tone p.319Roam. Guidance −−p.338Bar incoming when roam −−p.338Service(Int.) −−p.338PHONEBOOKPhonebook −⑬p.70p.73OWN DATAReceived calls i24 −p.53Dialed calls −−p.53Mail member i97 −p.162Choku-Den f−p.78Common phrases i38 Default common phrases p.308Own dictionary i82 −p.309DL dictionary −−p.310MUSIC Music Player s (▼メモ )(1 second or longer)② ⑤p.277Music&Video Channel −③ ⑤p.2681SEG −⑭p.207OSAIFU-KEITAIIC card content −−p.202DCMX −−p.195To r u C a −−p.204Main item Sub item Branch itemMenu No. (Key operation)Default setting Ref. page

350Appendix/External Devices/TroubleshootingCharacter Assignment to Dial KeysCharacters that can be entered using 5-touch input• only appears in double-byte input mode.• Red text only appears in single-byte input mode.*1: “+” can be entered when you enter an SMS address by holding down the key for 1 second or longer. *2: Dakuten/Handakuten change when pressed before entering Dakuten/Handakuten character.*3: “゛” or “゜” appears at the beginning in single-byte input mode.*4: Line feed “ ” is entered when pressed after text is set.Assigned text changes in descending order when pressed before text is set.Key Kanji/Hiragana input mode Katakana input mode Alphabetic input mode Numeric input mode1あいうえおアイウエオ. @ / : - ~ 112かきくけこカキクケコ ABCabc2 23さしすせそサシスセソ DEFdef3 34たちつてとタチツテト GHIghi4 45なにぬねのナニヌネノ JKLjkl5 56はひふへほハヒフヘホ MNOmno6 67まみむめもマミムメモ PQRSpqrs7 78やゆよヤユヨ TUVtuv8 89らりるれろラリルレロ WXYZwxyz9 90わをんゎSpace、。ー・！？ワヲン Space ー・！？「」Space！？− ，’;()”＿ ~&￥00＋*1w、。ー・゛゜！？ *2 、。ー・゛゜！？「」*2*3 ！？−，’;()”＿ ~&￥＊q―――― *4#ぁぃぅぇぉァィゥェォー ∼ヵヶっッゃゅょャュョヮ、。∼∼

351Appendix/External Devices/TroubleshootingAllowable characters for 2-touch• During reading input when you are storing entries in the UIM phonebook, Double-byte input mode becomes katakana input. *1: These can also be used only when pictograph input is possible, such as “Text memo” or storing “Common phrases”. Note that these icons are always entered as double-byte characters. “Pictograph” is not available when you are composing an SMS, but “ ” and “ ” can be entered. *2: Pressing 80 switches between upper case input mode (top) and lower case input mode (bottom). You can also enter upper case text and then change it to lower case by pressing r . *3: In “Double-byte input mode”, dakuten “゛” and han-dakuten “°” are only displayed for characters with which dakuten can be used. Dakuten entered with other characters appear as spaces. : Spaces are entered. 1 あいうえおＡＢＣＤＥぁぃぅぇぉａｂｃｄｅ2 かきくけこＦＧＨＩＪｆｇｈｉｊ3 さしすせそＫＬＭＮＯｋｌｍｎｏ4 たちつてとＰＱＲＳＴっｐｑｒｓｔ5 なにぬねのＵＶＷＸＹｕｖｗｘｙ6 はひふへほＺ？！ ― ／ｚ7 まみむめも￥＆ *1 8 や（ゆ）よ＊＃ *1 *2 ゃゅょ9 らりるれろ 1 2 3 4 50 わをん゛゜ 6 7 8 9 0 ゎ、。Key 2nd key1stkey12345678901 ｱｲｳｴｵ A B C D E ｧｨｩｪｫ a b c d e2 ｶｷｸｹｺ F G H I J f g h i j3 ｻｼｽｾｿ K L M N O k l m n o4 ﾀﾁﾂﾃﾄ P Q R S T ｯ p q r s t5 ﾅﾆﾇﾈﾉ U V W X Y u v w x y6 ﾊﾋﾌﾍﾎ Z ? ! - / z7 ﾏﾐﾑﾒﾓ ¥ & *1 8 ﾔ ( ﾕ ) ﾖ * # *1 *2 ｬｭｮ9 ﾗﾘﾙﾚﾛ 1 2 3 4 5 @ / - _ : .ne.jp .co.jp .ac.jp0 ﾜｦﾝﾞﾟ 6 7 8 9 0 ~ ' , . www. .com .html http:// https://2nd key@docomo.ne.jp *3 *3Key1stkey1234567890■Double-byte input mode ■Single-byte input mode

352Appendix/External Devices/TroubleshootingSymbols and Special Characters■Double-byte symbols■Single-byte symbols■Symbols reading for conversionEnter and convert “きごう”, and some symbols are displayed as conversion candidates. Entering reading as follows enables conversion to the corresponding symbol:* The space at the first character is a “Double-byte space”. * When entering the message of SMS, and appear at the end of the list. * The space at the first character is a “Single-byte space”. Reading Symbolあっと、あっとまーくいこーるえんおすおなじおなじくおんぷかけるかっこ＠＝￥々〃♪×（）〔〕［］｛｝〈〉《》「」『』【】 ‘’“” () 〈〉 [] {} 「」Reading Symbolからこめころんこんまさんかくしゃせんしかくしめたすどうぱーせんと∼※：，△▲▽▼／＼□■◇◆＋ヽヾゝゞ〃々％Reading Symbolひくひしがたほしまるむげんめすやじるしゆうびんるーとわる−◇◆☆★○●◎∞♀→←↑↓〒√÷♂

353Continued on next pageAppendix/External Devices/TroubleshootingPictographs■PictographsYou can enter the pictographs by entering and converting the following readings.Readingはーとはーとしつれん・はーとはーとわーい・かお・うれしいいかり・かおがく・かお・かなしいやだ・かお・かなしいふらふら・かおるんるん・おんぷおんせんかわいい・はなきすまーく・きす・ちゅっぴかぴか・あたらしい・きら・ぴかひらめき・きら・ぴかむかっ・いかりぱんち・いかり・てばくだん・ばくはつ・いかりむーど・おんぷねむい・すいみん・ねる・ぐーびっくり・おどろきびっくり・おどろきびっくり・おどろきどんっ・しょうげきあせあせ・あせあせだっしゅ・にげろーーぐっど・やじるし・や・うえばっど・やじるし・や・したやじるし・うえやじるし・したやじるし・うえやじるし・したはれ・てんき・たいようくもり・てんき・くもあめ・てんき・かさゆき・てんき・ゆきだるまかみなり・てんき・ぴかたいふう・てんき・まる・ぐるぐるきり・てんきこさめ・てんき・かさおひつじざ・せいざおうしざ・せいざふたござ・せいざかにざ・せいざししざ・せいざおとめざ・せいざてんびんざ・せいざさそりざ・せいざいてざ・せいざやぎざ・せいざみずがめざ・せいざうおざ・せいざすぽーつ・ふくやきゅう・すぽーつ・ぼーるごるふ・すぽーつてにす・すぽーつさっかー・すぽーつ・ぼーるすきー・すぽーつばすけっとぼーる・すぽーつ・ばすけ・ばすけっともーたーすぽーつ・はた・ふらっぐ・えふわんぽけっとべる・ぽけべる・べるでんしゃ・のりものちかてつ・のりもの・めとろしんかんせん・のりものくるま・のりもの・せだんくるま・のりもの・あーるぶいばす・のりものふね・のりものひこうき・のりものいえ・たてもの・うちびる・たてもの・かいしゃゆうびんきょく・ゆうびんReadingびょういんぎんこう・ばんくえーてぃーえむ・ばんくほてるこんびにがそりんすたんど・がすすたんど・がすちゅうしゃじょう・ぱーきんぐ・ぴーしんごうといれ・べんじょれすとらん・しょくじ・ごはん・めしきっさてん・しょくじ・さてん・おちゃばー・しょくじ・さけ・かんぱいびーる・しょくじ・さけ・かんぱいふぁーすとふーど・しょくじ・はんばーがーぶてぃっく・くつ・ふく・はいひーるびよういん・はさみ・とこやからおけ・まいく・うたえいが・びでおゆうえんちおんがく・きく・へっどほんあーと・かいがえんげき・しばいいべんとちけっと・きっぷきつえん・たばこきんえん・たばこかめら・しゃしんかばん・ばっぐほんりぼんぷれぜんと・おめでとうばーすでー・おめでとう・たんじょうびでんわけいたいでんわ・けいたい・けーたい・でんわReading

354Appendix/External Devices/Troubleshootingめもてれびげーむしーでぃーはーと・とらんぷすぺーど・とらんぷだいや・とらんぷくらぶ・とらんぷめ・みる・みてみみ・きくて・ぐーて・ちょきて・ぱーあし・あしあとくつめがねくるまいすしんげつ・つき・まるはんつき・つきはんつき・つきみかづき・つきまんげつ・つき・まるいぬ・どうぶつねこ・どうぶつりぞーと・よっと・ふねくりすます・きかちんこ・かっと・かんとくふくろぺん・めもひとかげいすよる・つき・おやすみえんど・おわりとけい・じかんでんわ・でんわばんごうめーる・あどれすふぁっくすあいもーど・あいあいもーど・あいめーる・てがみ・あどれすどこもReadingどこもぽいんと・どこもゆうりょう・えん・かねむりょう・ただ・ふりーあいでぃーぱすわーど・かぎつぎ・りたーんくりあさーち・しらべる・むしめがねにゅー・にゅう・あたらしいはた・ふらっぐ・いちふりーだいやるしゃーぷいち・すうじに・すうじさん・すうじし・よん・すうじご・すうじろく・すうじなな・しち・すうじはち・すうじきゅう・く・すうじぜろ・れい・すうじけってい・おーけー・おっけーあいあぷり・あぷりあいあぷり・あぷりてぃーしゃつ・しゃつ・ふくさいふ・かね・おかねけしょう・くちべにじーんず・ふく・ずぼんすのぼ・すのーぼーど・すぽーつちゃぺる・べる・かねどあ・とびらどるぶくろ・かね・おかねぱそこん・ぴーしーらぶれたー・らぶめーる・てがみ・めーるれんち・しゅうりえんぴつ・めもおうかん・かんむり・おうゆびわすなどけい・じかんReadingじてんしゃ・のりもの・ちゃりゆのみ・おちゃ・ちゃうでどけい・とけい・じかんかんがえる・かお・うーむほっ・かおひやあせ・かおひやあせ・かおいかり・かお・ぷーぼけー・かおはーと・かおおーけー・て・おっけーあかんべ・かお・べーうぃんく・かおうれしい・かお・にこがまん・かおねこ・どうぶつなみだ・かお・なきなみだ・かお・なきえぬじー・だめくりっぷ・てんぷはしるひと・だっしゅ・はしる・にげるまるひ・ひみつりさいくるきけん・ちゅういきんしくうしつ・くうせき・くうしゃ・あきごうかくまんしつ・まんせき・まんしゃ・いっぱいやじるし・ややじるし・やがっこうなみ・うぇーぶ・うみふじさん・やまくろーばー・はなさくらんぼ・はな・ちぇりーちゅーりっぷ・はなばなな・たべものりんご・たべものめ・はなReading

355Continued on next pageAppendix/External Devices/Troubleshooting* Pictographs with no reading can be entered only by Pictograph. もみじ・はなさくら・はなおにぎり・おむすび・たべものしょーとけーき・けーき・たべものとっくり・おちょこ・さけ・かんぱいどんぶり・ごはん・たべもの・しょくじReadingぱん・しょくじ・たべものかたつむり・どうぶつひよこ・どうぶつぺんぎん・どうぶつさかな・どうぶつうまい・たべる・かおにやり・かお・わらいReadingうま・どうぶつ・けいばぶた・どうぶつわいんぐらす・わいん・さけ・かんぱいげっそり・さけび・むんく・かおReading■Pictograph idiomsIn predicted conversion mode, some readings convert to pictograph idioms combining multiple pictographs. Reading Idiomおたんじょうびおめでとう／はっぴーばーすでーるんるんわーいるるるーきゃぴきゃぴめろめろわくわくはっぴーうきうきらぶらぶどきどきやったーだいすきわおっがっかりしくしくしょんぼりぷんぷんがーんきらいしょっくつかれたすやすやおはようこんにちははろーこんばんはおやすみばいばいたのしみおつかれさまありがとうごめんねがんばろうひさしぶりげんき？にんまりらぶりーすてきうれしいかなしいおいしいはやくいそいでいるゆっくりほんとうにはやくもうだっしゅつうきんしはつしゅうでんまんいんでんしゃどらいぶじゅうたいがすけつかえるだんしこうじょしこうだいがくしょうがっこう Reading Idiom←∼凸凸凹凸

356Appendix/External Devices/Troubleshootingてすとべんきょうてすとはんいもうべんきょうちゅうがっこうがやすみしりょくけんさざんぎょうかえれないじゅうようしょるいきゅうりょうかっとのんびりきがえるひとりぐらしやちんろくがゆめのなかばくすいおふろにはいるすかっさいこうさいあくほんとうにつらいおこったぞおこったぞげきどきれそうりょうかいらじゃーあそぼうだいじょうぶよろしくおねがいおっけーほのぼのわかったあそびにいくよっぱらうばかんすぱちんこでぃーじぇーれすとらん Reading Idiom→ ←中凸Ｃ←Ｙ…えすてなんぱらいぶはうすごうこんしんかんこんぱいけめんいけめんひとめぼれとししたとしうえこいのよかんえんきょりれんあいやきもちふたまたえんをきるけっこんなやみちゅうおんしんふつうかっぷるでーとちこくまくどなるどてをつなぐはなびかんぱいくりすますえきまえとないいどうじかんくやしいうるさいびっくりうらやましいはれめまじで？さみしいたいへんはらいたなつばてふらふら Reading Idiom。∼中∼。。。。夏 ○

357Appendix/External Devices/Troubleshootingごうきゅうのみすぎめにくまめーるそうしんうれしめーるうれしめーるらぶめーるはやめーるりれーめーるしーくれっとめーるあついひじょうにあついおおゆきさむいありがとう Reading Idiomごめんなさいきいておしえてみみよりじょうほうおはようよろしくふぁいとこんばんにゃこんばんわんわんぎりながでんわこくさいでんわときがたつおみやげ Reading Idiom？∼∼∼NzWhen you send pictographs to the mobile phone other than i-mode terminal or a PC, they may not be displayed correctly. Pictographs may not be displayed correctly depending on the model of the other party even when it is the i-mode terminal.

358Appendix/External Devices/TroubleshootingFace Marks■Face marks readingYou can enter the face marks by entering and converting the following readings. Also, all the following marks are displayed as conversion candidates when you enter “かお” or “かおもじ” and press p (Convert) to convert. Reading Face markありがと（う）ばんざいわーいおーいぶいぎゃははあはにこちゅわくわくういんくさよならがんばねこまったもんだやだぽりぽりひやあせあせあせびくっどきえめがてんはてなきらーんしくしくさよならいたたえーんなぜがーんえへんむいかりむかこそこそじーっきこえないぶたーこあらいっぷくほしねてるねむいねむいめもうんかんぱいどもがまんこんにちはいいなうーんてれるしあわせなかよしごめんいじいじいじわるよろしくこまったへこむびっくりだっしゅReading Face mark Reading Face mark

359Appendix/External Devices/TroubleshootingCommon PhrasesCategory Common Phrase①Internet ①.co.jp ⑥.go.jp②.ne.jp ⑦@docomo.ne.jp③.com ⑧http://④.or.jp ⑨https://⑤.ac.jp www.②Emoticon1 ①⑥②⑦③⑧④⑨⑤③Emoticon2 ①⑥②⑦③⑧④⑨⑤④Emoticon3 ①⑥②⑦③⑧④⑨⑤⑤Greetings ① おはようございます ⑥ お疲れさまでした② おやすみなさい ⑦ お世話になっております③ 昨日は、どうもありがとうございました ⑧ こんにちは④ 行ってきます ⑨ こんばんは⑤ いってらっしゃいよろしくお願い致します⑥Business ① 直行します ⑥ 本日の会議は中止となりました② 直帰します ⑦ 出欠をご連絡ください③ 休暇をとります ⑧ 次の指示を待ってください④ 半休します ⑨ 携帯の電源を切ります⑤ 電車遅延のため、遅れますメールで連絡してください⑦Private ① 遊びに行こう ⑥ 先に行きます② 飲みにいきませんか？ ⑦ 先に帰ります③ 遅れます ⑧ 時間です④ 変更します ⑨ 何してるの？⑤ 中止ですどこにいるの？⑧Reply ①OKです ⑥ 今忙しい②NGです ⑦ 後で連絡を入れます③ ありがとう ⑧ 保留です④ ごめんなさい ⑨ キャンセルです⑤ 待ってて！時間がありません⑨Original

360Appendix/External Devices/TroubleshootingMulti Access Combination Patterns○: Can be activated. ×: Cannot be activated. △: Can be activated depending on situation.−: Functionally incompatible. *1: Includes i-Channel site view and communication via Full Browser or ToruCa. *2: If you have subscribed to “Call Waiting”, you can hold the current voice call to make another call. *3: If you have subscribed to “Call Waiting”, you can hold the current voice call to answer an incoming call. If you have subscribed to “Voice Mail” or “Call Forwarding”, you can end the current communication and then answer a new incoming communication.→p.317*4: If you have subscribed to “Call Waiting”, “Voice Mail” or “Call Forwarding”, you can end the current communication and then answer a new incoming communication.→p.317*5: Make a videophone call after disconnecting the current i-mode. *6: If “V-phone while packet” is set to “V-phone priority”, answering an incoming videophone call disconnects i-mode communication. *7: You cannot communicate via i-αppli software. *8: An i-mode mail, MessageR or MessageF is not received, but is stored in the i-mode Center. You can receive a stored i-mode message, MessageR or MessageF by performing “Check new messages” after the current communication ends. *9: It is logged as a missed call. AnothercommunicationCurrent conditionVoice call VideophoneUsing i-mode*1Using i-αpplii-mode mailDialingIncoming callDialingIncoming callSend ReceiveDuring a voice call △*2 △*3 ×△*4 ○×○○During a videophone call×△*4 −△*4 ××××*8During i-mode*1 ○○△*5 △*6 −○○○During packet communication with a PC○○×××△*7 ××*8During 64K data communication×△*4 ×△*4 ××××*8AnothercommunicationCurrent conditionSMS Packet communication64K data communicationSend Receive Send Receive Send ReceiveDuring a voice call ○○○○×△*4During a videophone call×○××*9 ×△*4During i-mode*1 ○○××××During packet communication with a PC○○−−××During 64K data communication○○×××△*4

362Appendix/External Devices/Troubleshooting*14 : “Voice memo” is activated only by pressing s (▼メモ) for 1 second or longer. However, it is not available while switching between a voice call and a videophone call. *15 : “Chaku-moji” is unavailable. Some functions such as “Phonebook 2in1 setting” are not available depending on the 2in1 setting. *16 : “Voice Mail” messages cannot be played. The Service Numbers (p.317) and special number (p.324) cannot be dialed (but can be dialed using USSD). *17 : “Caller ID Notification” and “2in1 setting” is unavailable. *18 : “Restrictions” is unavailable. *19 : “Common phrases”, “Own dictionary” and “Download dictionary” are unavailable. *20 : Only “ToruCa”, “IC card lock setting” and “Search by i-mode” are available. *21 : Only “Booking program list” and “Timer recording list” are available.*22 : i-mode communications are not available.Services Available for the FOMA TerminalAvailable service Phone numberDirectory assistance (pay: service charge + call charge)* Unlisted phone numbers cannot be given. (No area code) 104Telegram (pay: telegram charge) (No area code) 115Time (pay) (No area code) 117Weather forecast (pay) Area code of an area you want to know + 177Emergency call to the police (No area code) 110Emergency call for a fire engine or an ambulance (No area code) 119Emergency call for help with maritime accidents (No area code) 118Emergency Message Recording System (pay) (No area code) 171Collect call (pay: service charge + call charge) (No area code) 106NzWhen you use the Collect Call Service (106), the receiver will be billed for the call charge plus an additional service charge of 90 yen (94.5 yen tax included) for each call. (as of May, 2008)zWhen you use the Directory Assistance Service (104), you will be billed for the call charge plus an additional service charge of 100 yen (105 yen tax included). A free service is available for persons with impaired vision or disability of the arms or hands. For further details, call 116 (NTT inquiries) from ordinary phones. (as of May, 2008)zThis FOMA terminal supports “緊急通報位置通知” (Emergency Location Report). When calling 110, 118 or 119 from the FOMA terminal, your current location (location information) is automatically notified to a concerned organization such as police office. The location information may not be correctly sent depending on your current location or the condition of the signal reception. If you dialed with “184” attached not to notify the caller information, your location information and caller ID is not notified. However, when the concerned organization judges the information is necessary for protection of a human life, your location information and caller ID may be acquired. Where and when to start the support of “緊急通報位置通知” (Emergency Location Report), differ in every local organization. zWhen calling 110, 119 or 118 from the FOMA terminal, first inform that you are calling from a mobile phone, give your number, and state your location clearly so that the police or fire department can call you back. Also, do not move around when making the call. Do not turn off the FOMA terminal immediately after ending the call, but leave it turned on for another ten minutes or so, so that you can receive a call. zDepending on the area you are calling from, you may not be connected with the nearest police or fire department. In that case, call again from a public phone or land line. zIf you are using a “Call Forwarding” service from a general phone and if a mobile phone is set as the forwarding number, depending on the settings of the general phone or mobile phone, the caller may simply hear the ring tone even when the mobile phone is busy with another call, out of range or turned off. zOther services such as 116 (NTT inquiries), Dial Q2, message (Dengon) Dial, and Credit Call Service are not available (However, Credit Call Service calls can be made from public or general subscriber phones to the FOMA terminals).

363Appendix/External Devices/TroubleshootingOptions and AccessoriesBy combining various options and accessories sold separately, your FOMA terminal can support a wide range of applications to meet both your personal and professional needs. Note that some products may not be available depending on the area you are in. For more information, contact an NTT DOCOMO shop or service counter. For details of options and accessories, refer to relevant User’s Manual. • Earphone/Microphone with Switch P001*1/P002*1• Stereo Earphone Set P001*1• Flat-plug Earphone/Microphone with Switch P01/P02*2• Flat-plug Stereo Earphone Set P01*2• Bone conduction microphone/receiver 01*2• FOMA USB Cable*3• FOMA AC Adapter 01/02*4• FOMA Dry Battery Adapter 01• Carry Case S 01• FOMA USB Cable with Charge Function 01/02*3• FOMA Portable Charging Adapter 01• In-Car Hands-Free Kit 01*5• FOMA In-Car Hands-Free Cable 01• FOMA Indoor Booster Antenna*6• FOMA Indoor Booster Antenna (Stand Type)*6• In-Car Holder 01*7• FOMA AC Adapter 01 for Global Use*4• FOMA DC Adapter 01/02• Desktop Holder SO11• Battery Pack SO03• Back Cover SO12• Earphone Plug Adapter for External Connector Terminal 01• Earphone Plug Adapter P001• Style-Up Panel SO03*1: To connect to FOMA SO706i, the Earphone Plug Adapter P001 and Earphone Plug Adapter 01 for External connector terminal 01 are required. *2: To connect to FOMA SO706i, the Earphone Plug Adapter for External connector terminal is required. *3: USB HUB may not function correctly. *4: Charging with the AC adapter→pp.41, 42*5: To connect/charge FOMA SO706i with USB, the FOMA In-car Hands-free Cable 01 is required. *6: Use in Japan only. *7: To attach FOMA SO706i to the In-Car Holder, attach to “5th position” shown as ② on the list of “In-Car Holder 01 Manual”. Movie Playing SoftwarezTo play a movie (MP4-formatted file) on PC, install QuickTime Player (free) ver. 6.4 or later (or ver. 6.3 + 3GPP) of Apple Inc. zDownload QuickTime from the following website: http://www.apple.com/jp/quicktime/download/• To download, you need PC to access Internet. You are charged for the Internet communication fee to download the software. • View the website above for more details on the environment, how to download or how to operate.

364Appendix/External Devices/TroubleshootingMalfunction ChecklistzCheck first whether the software update is required. If it is required, update the software.→p.377zIn the following table, problems are written in red, and points to check and reference pages are written in black. The FOMA terminal does not turn on (The FOMA terminal cannot be used)●Is the battery pack properly attached?→p.41●Has the battery run out? →p.44The animation shown on the right appears and an alarm tone sounds●The battery has run out. Recharge the battery.→pp.41, 44The “ ” icon appears and I cannot make a call●Are you out of range or is the reception poor?→p.44Cannot access functions quickly by pressing the keys pre-assigned to the menu numbers (p.340)●Set the Theme of the main menu to “Standard Menu”.→p.33I cannot make a call by pressing the dial keys●Is Original lock for “Keypad dial” under “Dial/sending mail” set?→p.109●Is Keypad lock set? →p.110●Is Restrict dialing set?→p.112I dialed a number and initiated a call, but all I hear is a busy tone●Did you start dialing before hearing the dial tone?→p.48●Did you forget to dial the area code?→p.48●Is “Please wait” displayed?I cannot receive calls. Or I cannot hear the ring tone. ●Are any of the following functions set?Restrictions→p.112• Call rejection • Call acceptation• Call forwarding • Voice MailRing time(sec.)→p.114• Set mute secondsReject unknown→p.114Call setting w/o ID→p.114• Unknown: Reject • Payphone: Reject• User unset: Reject●Is the FOMA terminal in Manner mode?→p.86●Is the FOMA terminal in Public mode (Driving mode)?→p.62●Is Original lock for “Incoming call” under “Incoming/Mail disp.” set?→p.109●Is Self mode set? →p.115●Is the start time of Voice Mail or Call Forwarding service set to “0 second”?→pp.312, 315●Is Caller ID Request set to Activate?→p.316●Is mova valid with the Dual Network service?→p.316●Is the ring volume set to “Silent”?→p.61●Is “0 second” set as the ring time for Record message?→p.65Mail ring tones and alarm tones sound but no ring tone sounds when receiving a call●Is “Set mute seconds” under “Ring time(sec.)” set to longer time (e.g. 99 seconds)? Set “Set mute seconds” to shorter time.→p.114The records of Dialed calls/Redial, Sent address disappear automatically●Is “Restrict dialing” under “Restrictions” set?→p.112The ring tone sounding when receiving a voice call or videophone call is different from what I selected●When the ring tone settings are duplicated, the priority applies.→p.83The image appearing when receiving a voice call or videophone call is different from what I selected●When the image settings are duplicated, the priority applies.→p.83When receiving a voice call or videophone call, the color or pattern of the illumination is different from what I set up●When the illumination settings are duplicated, the priority sequence will be assigned.→p.93It takes long to display or play a movie/i-motion or a Chaku-Uta- Full®●Is the movie/i-motion or the Chaku-Uta-Full® saved in “Movable contents” folder? It may take long to display or play the data saved in the “Movable contents” folder. Cannot copy or move a movie/i-motion or a Chaku-Uta-Full® to microSD card●Is the Chaku-Uta-Full® saved partially?→p.273●Is the replay restriction (number of times, period, time limit) of the movie/i-motion or the Chaku-Uta-Full® invalid?→pp.226, 273A PDF document is not properly displayed●A PDF data may not be properly displayed if it contains formats unsupported by the PDF viewer or complicated designs.It takes long to display a PDF document●It may take long to display a large-sized PDF document.Cannot copy a PDF document to the FOMA terminal●Does the PDF file size exceed 2M bytes?→p.262Ｒｅｃｈａｒｇｅｂａｔｔｅｒｙ

365Continued on next pageAppendix/External Devices/TroubleshootingCannot copy a PDF document to a microSD card●Was the PDF document downloaded by page?→p.262A document is not properly displayed●A document may not be properly displayed if it contains formats unsupported by Document viewer or complicated designs.It takes time to display a document●It may take long to display a large-sized document.The screen or ring tone for an incoming call or message is the default setting●Depending on the combination of receiving screen and ring tone or the priority sequence, either the receiving screen or ring tone may be restored to default.●If setting i-motion or music as ring tone after setting a Flash movie as receiving screen, a pre-installed image may appear.The ring tone sounding when receiving a message is different from what I selected for the mail address●When the ring tone settings are duplicated, the priority applies.→p.83●If you have received two or more messages, the tone set for the last received mail address sounds.→p.83●If the format of the sender’s mail address is “(phone number) @docomo.ne.jp”, save only that phone number as a mail address and set a distinctive ring tone for that mail address in Select ring tone under Mail (recv.). →p.77●Is the sender’s mail address (a mail address shown on the received mail details screen) stored in the phonebook correctly and did you set a distinctive ring tone for that mail address in Select ring tone under Mail (recv.)? →p.77●If you receive an SMS, a distinctive ring tone set in Mail (recv.) for the phone number in the phonebook sounds. →p.83An icon appears instead of image, i-motion, music or Music&Video Channel●The following icons indicate that the image, i-motion, music or Music&Video Channel cannot be selected for the function. Select another data.→pp.225, 233, 270, 273 Cannot view 1seg●Out of digital terrestrial TV service area or in a weak signal location?●Is a FOMA card (UIM) inserted?●Are channels set?→p.209The color of the illumination flashing when receiving a mail is different from what I selected for the mail address●When the illumination settings are duplicated, the priority applies. →p.93●If you receive two or more messages, the illumination flashes following the settings of the illumination under Mail (recv.) that is set to the last received mail address.→p.92●If the format of the sender’s mail address is “(phone number) @docomo.ne.jp”, save only that phone number as a mail address and set distinctive illumination for that mail address in illumination under Mail (recv.).→p.77●Is the sender’s mail address (a mail address shown on the received mail details screen) stored in the phonebook correctly and did you set illumination for that mail address in illumination under Mail (recv.)?→p.77●If you receive an SMS, distinctive illumination set in illumination under Mail (recv.) for the phone number in the phonebook flashes.→p.77Cannot charge the FOMA terminal (the center illumination of the FOMA terminal does not light)●Is the battery pack properly attached to the FOMA terminal?→p.41●Is the adapter firmly plugged into the electrical socket or cigarette lighter socket?→p.42●Are the adapter and the FOMA terminal correctly connected (is the AC adapter firmly connected to the FOMA terminal or the desktop holder)?Battery life is short●Is the battery pack at the end of it’s life? The lifespan of the battery pack may be shortened depending on usage environment.→p.41●Battery life will depend on how the FOMA terminal is used.→p.42The key does not sound when I press it●Is “Keypad sound” set to “OFF”?→p.85●Is the FOMA terminal in Manner mode?→p.86I cannot use Any key answer to answer a voice call or videophone call●Is “Answer setting” set to “Quick silent” or “OFF”? →p.60●You cannot use Any key answer to answer a videophone call. The other party’s voice is difficult to hear during a call●Is the earpiece speaker properly placed against your ear?→p.24●Is anything (e.g. a sticker) obstructing the earpiece speaker? ●Is anything obstructing the speaker in handsfree mode? ●Did you change the “Volume” setting? Change the setting so that you can hear the other party clearly.→p.61

366Appendix/External Devices/TroubleshootingThe other party’s voice is too loud during a call●Did you change the “Volume” setting? Change the setting so that you can hear the other party clearly.→p.61Pressing the side key does not operate the folded FOMA terminal●Is Keypad lock set? →p.110●Is “Side key guard” set to “ON”?→p.112Pressing s (▼メモ) does not check missed calls, etc. when the FOMA terminal is foldedPressing and holding down s (▼メモ) for 1 second or longer does not launch the Music Player●Is “Info notice setting” set to “OFF”?→p.64●Is Keypad lock set? →p.110●Is “Side key guard” set to “ON”?→p.112The display is hard to see●Is Brightness under Backlight set to “Dark”?→p.90●Is “Shield view” set to “ON”?→p.90The display light of the display or keypad does not turn on●Is Lighting under Backlight set to “OFF”?→p.90●Press and hold 5 for 1 second or longer to turn the backlight on or off. Note that pressing and holding 5 for 1 second or longer will turn off the backlight e.g. while composing a message.Receiving an incoming call immediately after turning on the power displays the phone number but does not display the name stored in the phonebook●The FOMA terminal may be reading the FOMA card (UIM) immediately after turning on the power. The phonebook function may not be available then.It takes some time for the power to turn on after pressing and holding y for 1 second or longer●Data checking may take time (e.g. if the phonebook is full of data).→p.76Nothing appears on the display●Is the FOMA terminal set to Power saver mode? Press any key to cancel Power saver mode.→p.90The FOMA terminal does not perform incoming call operations (ring tone sounding, vibrator, illumination flashing) when receiving a call●The FOMA terminal does not perform incoming call operations (ring tone sounding, vibrator, illumination flashing) until the set time is reached, when receiving a call from a phone number not stored in the phonebook or from a caller who does not notify his/her caller ID and if “Set mute seconds” under “Ring time(sec.)” is set to “ON”.→p.114Receiving an SMS does not display the sender’s name stored in the phonebook●Did you correctly store the sender’s phone number on the phone number line ( ) of the phonebook? →p.70Mails are not automatically filtered●If the sender’s mail address is “(Phone number)@docomo.ne.jp”, save only the phone number in the Auto-sort settings.→p.174●If the sender’s mail address is not “(Phone number) @docomo.ne.jp”, save the entire address including the domain in the Auto-sort settings.→p.174A message is not automatically received●If you have set “Receive option setting” to “ON”, set it to “OFF”.→pp.164, 178Cannot install the FOMA communication setting file (driver) or make data communication●Is the USB mode setting set to “microSD mode” or “MTP mode”? Set it to “Communication mode”. →p.251Data transmission is not performed●Do you use USB HUB? USB HUB may not function correctly. PC cannot be connected in MTP mode. ●The microSD card which created on the other FOMA terminal is not available.i-mode, i-mode mail, i-αppli and i-Channel cannot be connected●Is “Host selection” set to something other than “i-mode”?→p.149●If you had started using the FOMA terminal before you subscribed to i-mode, turn the FOMA terminal off and then turn it back on.The FOMA terminal does not perform receiving message operations (ring tone sounding, vibrator, illumination flashing) when receiving a message●Is “Mail/Msg. ring time” set to “OFF”?→p.85●Is Original lock for “Disp. recv. mail/msg.” under “Incoming/Mail disp.” set?→p.109●Is “Receiving setting” set to “Operation preferred”? →p.178A sent message is not saved to the Outbox●Is “Sort all” set to the folder of mail-linked i-αppli? Highlight the folder of mail-linked i-αppli then select “Open folder” from the function menu to confirm the setting.→pp.171, 173A received message is not saved to the Inbox, and “ (white)” does not disappear●Does “ ” appear on the folder of mail-linked i-αppli in the Inbox? Or is “Sort all” set to the folder of mail-linked i-αppli? Highlight the folder of mail-linked i-αppli then select “Open folder” from the function menu to confirm the setting.→pp.171, 173

367Appendix/External Devices/TroubleshootingI was disconnected while sending a message, then received an SMSA message appears when I retry●SMS interrupts communication and notifies you that a large amount of data is being transferred within a given time. Follow the contents of SMS and the displayed message.Images taken with camera are flickered●When you take pictures indoors, flickering may appear due to the effect of fluorescent lighting, etc. Changing the “Flicker” setting may suppress flickering.→p.123Still images or movies shot with camera look too bright●You may shoot them outside or in a bright place with “Flicker” set to “Mode 1(50Hz)” or “Mode 2(60Hz)”. Restore the “Flicker” setting to “Auto”.→p.123Still images or movies look blurred●Move the lens selector switch of the lens to the ● position (standard lens) for normal shooting or to the position (macro lens) to switch to the close-up mode for close-up shooting.→p.118●Set a mode suited to the scene being shot.→p.122When I attempt to display the image or play for demonstration or see a preview, “ ” appears●“ ” may appear when the image data is corrupted.The terminal operates slowly when any keypads are pressed●It may occur if a large amount of data is stored on the FOMA terminal or if you exchange large data by using the microSD reader/writer function. Chance capture shooting shortens the shooting time●Chance capture shooting saves control data together with movie data, which may shorten the shooting time.Chokkan game cannot be used●Is Original lock set to Camera?→p.106■For overseas use“ ” or “select net” does not disappear from the screen, and international roaming service cannot be used●Are you out of international roaming service area or is the reception poor? ●See the international service guide such as “Mobile Phone User’s Guide [World Services]” to check if the area or operator is available. ●Turn off the FOMA terminal then turn it back on the first time you use the service after you move from Japan to overseas. ●Launch “NW search mode” to search for a compatible operator.→p.336A voice call or videophone call cannot be received●Is “Bar incoming when roam” set to “Activate”?→p.338●Is “V-phone while packet” set to something other than “V-phone priority”? →p.67●Videophone is not available while using GSM/GPRS network.The other party’s caller ID is not notified. The notified caller ID is not the other party’sThe FOMA terminal does not perform operations using phonebook data or Caller ID Notification●If the used network or operator does not notify the caller ID, the caller ID does not appear on the FOMA terminal screen even when the caller ID is notified. Depending on the used network or operator, the notified caller ID may be different from the other party’s.

368Appendix/External Devices/TroubleshootingIf Any Error Message AppearszIn the following table, error messages are written in red, and explanation/solution and reference pages are written in black. zError messages are described in alphabetical and Kana order. zNumbers in parentheses are codes used by the i-mode Center as separators between transmitted errors. “ACMmax restriction cannot call”●This message appears when the accumulated call charges exceed the upper limit set in a FOMA card (UIM) and a call cannot be made. Perform “Reset total cost” to release the restriction.→p.294“Activating BOX lock Cannot download”●There is a lock on the inbox and outbox as a whole, or on folders using mail-linked i-αppli, so mail-linked i-αppli cannot be downloaded or upgraded. To download or upgrade the mail-linked i-αppli, release the Mail box lock.→p.112“Activating BOX lock Unable to delete”●There is a lock on the inbox and outbox as a whole, or on folders using mail-linked i-αppli, so the mail-linked i-αppli and the folders using them cannot be deleted. To delete the mail-linked i-αppli and the folders using them, release the Mail box lock. If you delete only the mail-linked i-αppli, a message will be displayed asking whether to delete the corresponding mail folders dedicated to that i-αppli. Select “NO”.→p.112“Activating folder lock Cannot download”●See “Activating BOX lock Cannot download” (p.368) for the explanation and solution. “Activating folder lock Unable to delete”●See “Activating BOX lock Unable to delete” (p.368) for the explanation and solution. “Activating restrict dialing”●This message appears when you attempt a prohibited operation while Restrict dialing is set.→p.112“Address is not valid (451)”●Displayed when the mail has not been sent to the specified address correctly.→p.156“Attached file is deleted”●This message appears when an i-mode message received that you attempt to quote to send a reply has any file attached. It is also displayed if you attempt to forward an i-mode mail that has a file attached that is prohibited from being attached to mail or output from the FOMA terminal. The attached file is deleted when you press d.“Authentication canceled (401)”●This message appears when the Cancel button is pressed on the Authentication screen.“Authentication type is not supported (401)”●This message appears when authentication fails. Press d to return to the original page.“Cannot dial by Number B abroad Dial by Number A”●This message appears when the 2in1 mode is set to B mode and you attempted to make a call while overseas. Select OFF for “Caller ID Notification” to make calls without caller ID with Number A.“Cannot reset by this Ext. IC card”●This message appears when you put the FeliCa mark close to an unregistered contactless IC card during user authentication with the IC card authentication function.→p.111“Cannot save attached file”●This message appears when a mail is received with an attached file that cannot be registered for Receive Ir data, cable connection communication or copying from microSD card. “Cannot set this schedule”●This message appears when you have attempted to use “Copy & add this” on a schedule item with the same date and time as an existing item, or if you have received such a schedule item via infrared or iC exchange or cable connection.“Caution! This SMS includes Phone Nos. or URLs. Be careful if you do not recognize the sender.”●This message appears when you set “Message scan” under “Scanning function” to ON and attempt to open SMS containing a phone number or URL. Check the sender, then press d to display the text of the SMS.→p.383“Certificate is rejected (tampered)”●This message appears when an altered SSL certificate has been received. An SSL communication cannot be established with this site.●This message appears when an altered SSL/TLS certificate has been received. An SSL/TLS communication cannot be established with this site.“Check new messages is set all OFF”●New messages cannot be checked because none of the items is selected in “Set check new messages”.Select items to check in “Set check new messages”.→p.179“Connection failed”●This message appears when the host settings are incorrect. Set the host correctly, using “Host selection” under i-mode common set. →p.149●Connection to i-mode failed for some reason. Retry connection.●Set “Caller ID Notification” to “ON” and retry.→p.46

369Continued on next pageAppendix/External Devices/Troubleshooting“Connection failed (403)”●Connection to the site failed for some reason. Retry connection.“Connection interrupted”●i-mode connection was interrupted due to poor reception. Move to a location where the reception is good before using the i-mode service.→p.44●If this message appears when the signal is strong and the “ ” mark is displayed, the connected site is very busy. Retry later.“Continue using i-αppli and transmit data?”●This message appears when you selected “NO” or “Terminate i-αppli” in response to “The number of i-αppli communications is large. Continue communication?” Select “YES” to continue i-αppli communication. Select “Terminate i-αppli” to stop using the i-αppli.“Current UIM is not registered as IC owner Unable to delete”“Current UIM is not registered as IC owner Unable to download”“Current UIM is not registered as IC owner Unable to move”“Current UIM is not registered as IC owner Unable to run”“Current UIM is not registered as IC owner Unable to upgrade”●This message appears when the inserted UIM does not match the UIM information registered for FeliCa or you tried to run Osaifu-Keitai i-αppli.“Data in IC card is full Unable to download Delete service?”“Data in IC card is full Unable to move Delete service?”“Data in IC card is full Unable to run Delete service?”“Data in IC card is full Unable to upgrade Delete service?”●This message appears when Osaifu-Keitai i-αppli is downloaded or moved from a microSD card but there is not enough data capacity left on the IC card. Select “YES” to display a list of the Osaifu-Keitai service names already registered, the space (bytes) which would be freed by deleting each service, and the size of the capacity shortage. Select one or more services to delete, then follow the messages to start an i-αppli to delete them.“Data is too long A part is deleted”●The size of address, subject or text or more than one data exceeds the maximum, and the Compose message screen appears with the excess part deleted.“Data is too long Please delete message”●The combined double-byte character count for the main text and quotation symbols in a reply-with-quote i-mode mail exceeds 5,000 characters. Delete text to bring the count to 5,000 double-byte characters or less.“Data transmission is frequent Continue transmission?”●This message appears when the number of communications when using an i-αppli becomes very large within a certain period. Select “Yes” to carry on i-αppli communication, or “No” to stop communication. Select “Terminate i-αppli” to stop using the i-αppli.“Data transmission is frequent Press CLR and confirm data transmission”●This message appears when the number of communications from an i-αppli standby screen becomes very large within a certain period. Press t to select whether or not to permit communications from the i-αppli standby display, or to close the i-αppli standby display. →p.199“Dial/Receive calls activating Original lock”●This message appears when you have attempted a prohibited operation while the original lock is applied to “Dial/sending mail”.→p.109“Download failed”●This message appears when a download of a melody, Chara-den or download dictionary suffered a communication error or improper data.“Editing now Unable to delete”●This message appears when you attempt to delete a mail message saved in Draft while it is being edited.“Enter correct Network Security Code”●This message appears when an incorrect network security code was input for a function which requires network security code entry. Enter the correct network security code.→p.100“Error in image Does not work correctly”●This message appears when a Flash movie cannot be played due to an error found in the data.“Error Register forwarding number”●This message appears when you have subscribed to the Call Forwarding service and attempt to forward an incoming call by selecting “Call Forwarding” from the function menu without setting the forwarding number.→p.314“Failed to Copy all”●Copying could not be complete, for some reason. Replace with a different microSD card and try to copy again.“Failed to Copy this”●Copying could not be completed, for some reason. Replace with a different microSD card and try to copy again.“Failed to read”●Copying could not be completed, for some reason. Replace with a different microSD card and try to copy again.

370Appendix/External Devices/Troubleshooting“Failed to retrieve channel information”●This message appears when you display the channel list screen for the first time after purchase or when you attempt to display the channel list screen after resetting the i-Channel, changing the i-Channel host URL, initializing the FOMA terminal or exchanging the FOMA card (UIM), and then if i-Channel information cannot be obtained. Move to a location where “ ” is displayed, then display the channel list screen again.→p.153“Format microSD for your phone”●There is an error such as a microSD card that has not been initialized. Reformat the microSD card.→p.251“Frame number of this page is not supported”●The webpage cannot be displayed because the frame count exceeds the maximum that can be displayed on Full Browser or pixel browser.“Function cannot operate any more”●Close another function before continuing the operation.“i-αppli stand-by display terminated due to security error”“Software terminated due to security error”●This message appears when an i-αppli or i-αppli standby screen (including i-αppli DX) was closed because you attempted to perform an unauthorized operation.→pp.189, 199““i-αppli To” function is not set”●This message appears when you attempted to start software from a site, mail, Send Ir data, Bar code reader, IC card, ToruCa or data broadcast, but the software could not start because the specified software has no association permission.→p.197“Input error (205)”●This message appears after you input and send data from a site of Internet homepage. Press d to cancel the input text or settings (The set or input content has been sent, so this operation does not cancel the transmission).“Insert microSD”●The microSD card is not inserted correctly, or may be broken. Check that the microSD card is correctly inserted into the FOMA terminal.→p.244“Insert UIM”●This message appears when the UIM is not inserted correctly, or could be broken. Check that the FOMA card is inserted correctly.→p.39“Invalid address”●The address contains a “,” and is invalid. Delete “,”.●Mail cannot be replied to because the address of the received mail exceeds 50 single-byte characters. ●SMS cannot be sent because the address includes characters other than numerals, “#” and “*”. Delete characters and spaces other than numerals, “#” and “*”.“Invalid UIM Auto-start failed”●This message appears when an i-αppli that is restricted by FOMA card security attempted to start automatically. →p.39“Invalid UIM Requested service not available”●This message appears when you select and attempt to run a shortcut icon for data that is protected by FOMA card security.→p.39●This message appears when you select and attempt to run a screen memo or MessageR/F that is protected by FOMA card security.→p.39“Invalid UIM Requested software failed to start”●This message appears when you specify and attempt to start an i-αppli that is restricted by FOMA card security.→p.39“Invalid URL”●This message appears when you entered a URL using “Enter URL” or “Home URL”, but it began with something other than “http://” or “https://”, or you selected OK without any input. Enter the URL again.→pp.141, 148, 218“Is the ToruCa automatic reading function in a mobile phone used through the reader/writer?”●This message appears when you swiped the FeliCa mark over a reader with “Auto reading setting” set to “OFF”. Select “YES” to use the automatic reading function.→p.206“Memory full Cannot move”●This message appears when you try to move data out of a secret folder but the destination folder is full. Delete data from the destination folder, then move the data again.→p.104“Memory No.:XXX Cannot overwrite”●This message appears when you are not in Secret mode or Secret data only mode, but you try to register the same phone number as a secret data memory number in the phonebook.→p.103“Memory shortage”●This message appears when the software cannot be launched due to memory shortage.●Operation is interrupted due to memory shortage. If this message often appears, reboot handset.“Memory shortage Quit”●The process is interrupted due to memory shortage. When you are composing an i-mode mail, the number of tasks running and the combination of characters may make it impossible to input as many as 5,000 double-byte characters. “Memory shortage Return to Full Browser menu”●The process was interrupted due to memory shortage. Press d to return to the Full Browser menu.“Memory shortage Return to i-mode menu”●The process is interrupted due to memory shortage. Press d to return to the i-mode menu.

371Continued on next pageAppendix/External Devices/Troubleshooting“Message too long to add header”●This message appears when the character count of the text and header in total exceeds 5,000 double-byte characters and the header cannot be added.“Message too long to add header & signature”●This message appears when you are forwarding i-mode mail, but it was not possible to automatically paste the header/signature because they would cause the character count to exceed the limit of 5,000 double-byte characters.“Message too long to add signature”●The signature cannot be pasted because the total of main text and signature would exceed 5,000 double-byte characters.“No channel info”●There is no channel information, and you cannot compose a suggested message.“No data”●This message appears when there is no phonebook entry that matches the search conditions when you perform Phonebook search.“No requested data Delete this shortcut icon?”●This message appears when you select the shortcut icon for data that has been deleted and attempt to start it.“No requested software”●It is displayed when an i-αppli is started from mail, Send Ir data function, Bar code reader, IC card or data broadcast, and the relevant software is absent.“No response”●This message appears when the IC card authentication function was used for user authentication, but authentication timed out and failed.→p.111“No response (408)”●There was no response from the site, and communication was cut off. Retry connection.“No response Retry?”(During infrared data exchange/iC exchange)●The receiving terminal cannot be found/detected. If Ir communication is used, make sure the Ir ports are facing each other. If iC exchange is used, check the FeliCa marks and place them together again. You can select “YES”, then press d to try again. →pp.257, 259“No Switch”●This message appears when you cannot switch to a videophone call during a voice call because the other party is establishing a packet communication (including i-mode). Check the other party’s status and retry.→p.50“Not correspond contents”●The information acquired by the bar code reader includes content not supported by this FOMA terminal, so it cannot be recognized.“おまかせロック設定中です ”●Omakase lock is set. While Omakase Lock is set, all key operations are locked except receiving a voice call/videophone call and turning the power on/off.→p.102“Other function active Cannot start”“Other function active Cannot operate”●This message appears when you attempt an unavailable operation when another function is running.“Out of service area”●This message appears when you attempt to use an i-mode service outside the service area, or where the radio waves do not reach. Move to a place where “ ” is displayed, then use the i-mode service.→p.44“Page is not found (404)”●The site is not found. It may not exist.“Password is not correct (401)”●This message appears when the authentication did not go through on the “Authentication” or “Re-authentication” screen. Select “YES” to retry authentication.“Phone/UIM ID will be sent?”●This may be displayed during viewing of an Internet page or other site. Select “YES” to send your mobile phone manufacturer number. Otherwise, select “NO”.→p.137“PIN1 code blocked”●This message appears when powered on during PIN1 code lock. Press d to display the input screen for the PIN lock release code, then enter the PIN lock release code correctly to unlock.→p.100“Please wait for a while”●The voice line or packet communication device may be malfunctioning. Otherwise, the voice line/packet communication network may be congested. Attempt to use a voice call, videophone call or i-mode later.You can still make an emergency call (110, 119 and 118). However, you may not be connected depending on the condition.“Please wait for a while (packet)”●The packet communication device may be malfunctioning. Otherwise, the packet communication network may be congested. Retry later.“PUK code blocked”●This message appears when you turn on the power and attempt a UIM operation while the PUK code is locked. Contact the DOCOMO service counter.→p.100“Reading UIM Cannot start”●This message appears when you attempt an operation related to the UIM while it is being read. Please try again later.“Replace with a new one or check the disk”●Run checkdisk on the microSD card.→p.247

372Appendix/External Devices/Troubleshooting“Replay period has expired”●This message appears when you select and attempt to run the shortcut icon for an i-motion which has finished its play duration or play time limit.“Replay period has expired Delete?”●This message appears when you attempt to play an i-motion or Chaku-Uta-Full® for which the playback period has expired. Select “YES” to delete.“Root certificate has expired Connect?”●This message appears when the CN (name) of an SSL certificate does not match. Select “YES” to connect. Otherwise, select “NO”.“Root certificate is not valid”●This message appears when you receive an SSL/TLS certificate with the “Certificate” set to “Invalid”. Check the contents of the certificate, set the certificate to valid and reconnect. →p.149●This message appears when a certificate is received that is rendered invalid by Certificate settings. Check the content of the certificate, then set it as valid before trying to reconnect.→p.149“Security code is 4 to 8 digits”“Wrong security code”●This message appears when an incorrect security code was input for a function which requires security code entry. Enter the correct security code.→p.100“Service is used by the previous software Unable to download Delete a service?”“Service is used by the previous software Unable to move Delete a service?”“Service is used by the previous software Unable to update Delete a service?”●When the same service has been already downloaded, you cannot download, upgrade or move new service from a microSD card unless you delete the existing service. If you select “YES”, the service subject to deletion is displayed. Delete the previously registered service.“Service not registered”●The i-mode service is not available because you have not subscribed to the service. A separate subscription is required to use the service.●If you had started using the FOMA terminal before you subscribed to i-mode, turn the FOMA terminal off and then turn it back on.“Services are full Music of overwritten service is unable to play Overwrite?”●This message appears when a limit has been exceeded on the number of music services which can be registered (member services). Select “YES” to overwrite service with the oldest playback time limit. Music downloaded from the overwritten service can no longer be played.“Size of data is not supported”“Size of this page is not supported”●The size of the data downloaded from a website (via i-mode, Full Browser) or Internet webpage exceeds the maximum of one page. The download is interrupted, and only the downloaded data is displayed.●This message appears when the limit is exceeded while downloading a melody, download dictionary or Chara-den character.“Software for this folder deleted Refer to Open folder”●The software cannot be launched because the mail-linked i-αppli corresponding to the selected mail folder is deleted. Select a message contained in the folder from the function menu.→p.173“Software is stopped because of an error”●This message appears when software is running but suffers an error that prevents it from functioning further.“Some addresses is invalid”●This message appears when you attempt to reply to two or more addresses but not all addresses are valid.“Some attached file will be deleted”●A file is attached to the i-mode mail you are going to forward that is prohibited from being attached to mail or output from the FOMA terminal. Press d to delete the file that is prohibited from being attached to mail or output from the FOMA terminal.“Some mails not sent (561)”●Mail could not be sent correctly to some recipients.“SSL session cannot be established”●This message appears when it was not possible to connect to a site or Internet page that uses SSL communication. Retry connection.“SSL session failed”●This message appears when an authentication error occurred during SSL communication, causing interruption.“SSL/TLS session failed”●This message appears when an SSL communication is interrupted due to an error occurring during authentication for an SSL/TLS connection.“Syntax error”“Syntax error (XXX)”●The received data contains an error and cannot be displayed. The received data is discarded. A number indicating the contents of an error may appear in “XXX”. “Talking now Cannot operate”“Talking now Cannot start”●This message appears when you attempt an operation that is not possible while talking.→pp.283, 360, 361

373Continued on next pageAppendix/External Devices/Troubleshooting“This certificate has expired Connect?”●This message appears when an SSL server certificate is received that has expired, or has not reached its period of validity. Select “YES” to connect. Otherwise, select “NO”.●This message appears when you try to connect to a site or Internet page that uses SSL communication, if you have not made the “Set time” setting. Make the “Set time” setting. →p.46“This certificate is not valid for this URL Connect?”●The site requested a User Certificate, but the certificate has expired. It may be possible to display the site by selecting “YES”, but you are advised to download a new User Certificate.→p.150“This data can no longer be replayed”●This message appears when you select and attempt to run the shortcut icon for an i-motion which has finished its number of plays.“This data can no longer be replayed Delete?”●This message appears when you attempt to play an i-motion or Chaku-Uta-Full® which has finished its number of plays. Select “YES” to delete.“This data is not supported by this phone”●This message appears when an i-motion could not be acquired due to incompatible non-i-motion data.“This data may not be replayed”●This message appears when the format of the acquired i-motion is not MP4 (Mobile MP4).“This site is not certified Connect?”●This message appears when an unsupported SSL certificate is received. Select “YES” to connect. Otherwise, select “NO”.“This software contains an error”“This software contains an error Unable to download”“This software contains an error Unable to move”“This software contains an error Unable to update”●This message appears when the software cannot be downloaded, updated or moved from a microSD card because its data is inaccurate.“This software is not supported by this phone”●This message appears when the acquired software cannot be downloaded or moved from a microSD card because it is not compatible with this FOMA terminal.“This UIM cannot be recognized”●This message appears when a UIM that cannot be used in this FOMA terminal may have been inserted. Check that the right FOMA card (UIM) is inserted.→p.39“Time out”●Accessing a site or sending a message was interrupted because the time, which is set in “Set connection timeout”, has elapsed. Retry later.→p.149“Too much data was entered”●Too many characters are entered, and the data cannot be sent. Reduce the number of characters before trying to resend.→p.139“Unable to activate 1Seg Please activate after resetting Self mode or moving to FOMA coverage”●1seg cannot be activated as 1seg viewing was repeated when a communication could not be established, e.g. in Self mode or out of service area. Release Self mode or move into FOMA service area to enable communication, and retry activation.“Unable to download Data exceeds maximum size (452)”●This message appears when data being received cannot be received because it exceeds the maximum size.“Unable to obtain data due to replay restriction data error”●The playback period of playback limit for a partially-acquired Chaku-Uta-Full® has expired, so the remaining data cannot be acquired. The partially saved data will be deleted.“Unable to receive”●This message appears when you attempt to obtain data and a data error or communication error occurs.“Unable to retrieve the requested URL (504)”●Connection to the site failed for some reason. Retry connection.“Unable to support this card”●The FOMA terminal does not support this microSD card. Use a compatible microSD card.→p.243“Upper limit has been exceeded Connection failed”●The upper limit set for a Limit billing plan (Type Limit and Family Wide Limit) is exceeded.“URL address changed (301)”●The URL has changed because the site has been relocated. If the URL was registered as a bookmark, shortcut icon or home URL, re-register it.→pp.94, 142, 148, 221“URL is too long to register”●The URL exceeds 256 single-byte characters, so the bookmark or URL cannot be registered.“Usage is currently restricted Try again later”●This message appears when an extremely high volume of data communication occurred within a certain period while using a flat-rate i-mode packet service. Connection may become impossible for a period, so try to use i-mode again later.“Wrong password”●This message appears when you enter a wrong password on the password entry screen in viewing or downloading a PDF document.→pp.145, 261

374Appendix/External Devices/Troubleshooting“You have no certificate Connect?”●User Certificate has not been downloaded. It may be possible to display the site by selecting “YES”, but for some sites it may be impossible to continue.→p.150“Your certificate has expired Connect?”●This message appears when an SSL server certificate out of the validity period has been received. Select “YES” to connect. Otherwise, select “NO”.●This message appears when there was a request for a client certificate during connection to site of Internet page that uses SSL communication.→p.138“Your certificate is requested Send your certificate?”●The site has requested a User Certificate. Select “YES” to send the User Certificate or “No” to avoid sending it.““●▲■.ne.jp” 宛のメールが混み合っているため、送信できません (555) Unable to send. “●▲■.ne.jp” is not available temporarily.”* Domain name indication differs according to the recipient.●The telephone lines are down or extremely busy. Please try again later.

375Continued on next pageAppendix/External Devices/TroubleshootingWarranty and After-Sales ServiceWarrantyzMake sure that the warranty card is included with your FOMA terminal at the time of purchase. Check the contents, the information about “the shop or date of purchase”, etc. and keep the card in a safe place. If the card does not contain necessary information, immediately contact the shop and request them to fill in the card. The warranty period is one year from the date of purchase. zThe whole or part of the product, including its accessories, is subject to improvement without notice. zThe stored data such as phonebook entries may be altered or lost through the damage, repair or improper use of the FOMA terminal. It is recommended to take notes of the stored data such as phonebook entries just in case. Repairing the FOMA terminal cannot transfer most of the data downloaded via i-mode or i-αppli, complying with the copyright law. * With this FOMA terminal, you can save the data such as the phonebook, data used with i-motion or i-αppli to the microSD card. * With this FOMA terminal, you can keep the data such as the phonebook at the Data Security Center by using the Data Security Service (a pay service you need subscription). * If you have a PC, you can transfer and save the data such as phonebook entries to your PC by using the DOCOMO keitai datalink (p.329) and the FOMA USB Cable with Charge Function 01/02 (Optional) or the FOMA USB Cable (optional). After-sales service●If you have problems with your FOMA terminalBefore having your FOMA terminal repaired, see the “Malfunction Checklist” in this manual. If you still have problems, call at the technical inquiries number described on the back of the manual. ●If, after contacting DOCOMO, you are informed that your FOMA terminal is in need of repairsTake your FOMA terminal to a designated repair shop. The repair shop is only open during business hours. Remember to take your warranty card with you. ■During the warranty period• The FOMA terminal will be repaired free of charge in accordance with our written warranty policy. • Make sure to take the warranty card with you when having your FOMA terminal repaired. Even during the warranty period, a charge will be made for the repair if you cannot show the warranty card or if the malfunction or damage has resulted from improper use. • Even during the warranty period, a charge will be made for the repair if the malfunction has resulted from the use of devices or consumables that are not specified by NTT DOCOMO. • A charge will be made for repairs in the event of damage to the LCD screen, connectors and similar components after purchase. ■Repairs may not be possible in the following circumstances• Repairs Inquiries detect water exposure (Example: the water exposure detection sticker detects water exposure)• Tests determine that corrosion has occurred due to water exposure, condensation, perspiration, etc. or the circuit board has been damaged or altered (the external connector, liquid crystal, case, etc. has been damaged)* These cases are not covered by the warranty, and any repairs that may be possible will be carried out at the subscriber’s expense.■After the warranty period has expiredYou can request to have your FOMA terminal repaired, although a charge will be made for the repair.

376Appendix/External Devices/Troubleshooting■Stock period of partsReplacement parts (required for maintaining the functionality of the FOMA terminal) will be kept in stock basically for minimum of 6 years following the termination of production. However, the FOMA terminal may not be able to be repaired due to the lack of parts depending on the damaged parts. The repair may still be able to be performed even after the stock period has expired. Call at the technical inquiries number described on the back of the manual. Memory dial (phonebook function) and downloaded informationzIt is your responsibility to keep a separate record of all data stored on your FOMA terminal. NTT DOCOMO disclaims any responsibility for alteration or loss of data. zThe data you created, imported or downloaded may be modified or lost when you change the mobile phone model or send the FOMA terminal to repair. NTT DOCOMO accepts no liability whatsoever for any modification to or loss of such data. NTT DOCOMO may sent you a replacement of your FOMA terminal, instead of renovation. The data which contains the images and ring tones downloaded to the FOMA terminal, and the user created data are transferred to the replacement only when the FOMA terminal is repaired (some contents can not be transferred. The data may not be transferred depending on the damage). * It may take time to transfer the data or the data may not be transferred depending on the amount of the data stored on the FOMA terminal. ■ImportantzDo not attempt to adapt the FOMA terminal or its accessories by yourself. • Doing so may cause fire, injury or malfunction. • Repairs to modified devices will be accepted on the condition that the customer agrees to the said modifications being restored to their original condition. You may be rejected depending on the modification. The following may be regarded as modifications: • Labels etc. affixed to the screen or keys. • Decorations to the FOMA terminal involving the use of adhesives. • Replacement of the exterior etc. of the terminal with non-DOCOMO components. • Even during the warranty period, a charge will be made for the repair if the malfunction or damage has resulted from adaptation. zDo not peel off the model name seal attached to the FOMA terminal. The model name seal plays the part of the certificate verifying that the FOMA terminal complies with the technical standard. If the seal cannot be confirmed because it has been peeled off or replaced, the conformity to the technical standard cannot be judged, and then the repair may be unable to be accepted. zThe settings of the functions or the information about total call time may be cleared (reset) due to the damage, repair or improper use of the FOMA terminal. In this case, specify the settings again. zMagnetic components are used for the following part of the FOMA terminal. A cash card (ATM card, bank card), etc. which is easily affected by magnetism, may become unusable if it is kept close to the components: Down-right of qzIf your FOMA terminal gets wet or moist, immediately turn it off, remove the battery pack, and take the FOMA terminal to the repair shop as soon as possible. Note that the FOMA terminal may be unable to be repaired depending on the condition.

377Continued on next pageAppendix/External Devices/Troubleshootingi-mode Malfunction Check SiteYou can check if sending/receiving mails, downloading images/melodies or other operations are normally performed on the FOMA terminal by yourself. zConnecting to “i-mode Malfunction Check Site” (Japanese)•p“iMenu”“お知らせ”“サービス・機能”“ｉモード”“ｉモード故障診断 ”QR code for connecting to the sitezPacket communication charge is not charged for the i-mode malfunction check site. * Charges apply when accessing from overseas. zTest items vary depending on the FOMA terminal models. Also, the test items are subject to change. zTo check the operation with each test item, read the notes on the site carefully before performing test. zWhen connecting to the i-mode malfunction check site or testing the mail sending, information specific to your FOMA terminal (model, mail address, etc.) is automatically sent to the server (i-mode malfunction check server). The information sent to DOCOMO is not used for any other purpose than i-mode malfunction checking. zWhen there seems to be a malfunction as a result of the checking, contact the inquiries number provided on the back of this manual. Updating Software <Software Update>Check whether it is necessary to update software on the FOMA terminal. Download and update the software via packet communication if necessary. You will be notified of the update in the DOCOMO website or in “お知らせ” (News) of iMenu. zA charge will not be made for the packet communication to update the software. zThere are 3 ways to update: “Auto-update”, “Now update” and “Reserved update”. Auto-update: The new software is downloaded automatically and overwritten at the preset time. Now update: Updates immediately. Reserved update: Updates automatically on the date and time you specified. zYou can update the software if the i-mode host is set as the user defined host. zUpdating the software (downloading and installing) may take some time. zWhen you update the software, an SSL connection is established with the server (the software update server managed by NTT DOCOMO). Validate the certificate beforehand (default: Valid. Setting procedure→p.149). zBefore updating the software, charge the battery to the full. Top Test menu

378Appendix/External Devices/TroubleshootingzIt is recommended that you perform software updates when the handset is stationary and in a location with good signal quality (three bars for the antenna icon).* If the reception becomes poor and then the download is interrupted, try to update again in a place where the reception is good. zUpdating the software with the “PIN1 code entry set” set to “ON” displays the PIN1 code entry screen in the automatic restart after installing the software. You cannot make or receive a call or use other communication functions if you do not enter the correct PIN1 code. zYou cannot download the update software: When the reservation time comes while the other function is used, downloading starts after finishing the function (cannot start depending on functions) zYou cannot rewrite the updated software: If the auto-update rewriting fails, rewriting again at the Set auto-update time (next day or one week later).zCalls, communications and other functions are not available while software is being updated. However, voice calls can be answered while downloading.zIf the software has already been updated, “No update is needed Please continue to use as before” is displayed when you check for new software updates. zAfter updating the software, the displayed i-mode Center storage status icon disappears. Also, if the receive option is set to “ON” and mail is received while updating the software, the mail notification screen may not be displayed after the software has been updated. zWhen you update the software, information specific to your FOMA terminal (model, manufacturer number, etc.) is automatically sent to the server (the server for software updates managed by NTT DOCOMO). The information sent to NTT DOCOMO is not used for any other purpose than updating the software. zIf the update fails, the message “Rewrite failed” will appear and all operations will become unavailable. In this case, please seek advice at a repair counter designated by DOCOMO.• When the FOMA card (UIM) is not inserted• When PIN lock is set• When date and time are not set• When the Self mode is set• When packet dialing is restricted• During 64K data communication• When the FOMA card (UIM) is invalid• When PIN Unlock Code (PUK Code) is locked• When Omakase Lock is set• When “ ” is displayed• While using mova terminal with Dual Network service• During international roaming• When Omakase Lock is set • While other functions are runningNzDo not remove the battery pack while updating the software. Doing so may cause the update to fail. zIt is possible to perform software updates while keeping your Phonebook entries, camera images, downloaded data and other data saved on the FOMA terminal intact. However, note that in some cases data cannot be protected depending on the condition of your FOMA terminal (malfunction, damage, water exposure, etc.). It is recommended that you back up important data. (It may not be possible to back up some data such as downloaded data.)zIn case of Now update or Reserved update, when the software update is completed without operation for confirmation, you will see the shortcut icon “ ” (Update complete) on the standby screen. Select “ ” and enter the security code to see the detail results of the update.

379Continued on next pageAppendix/External Devices/TroubleshootingPerforming Software Update automatically <Auto-update>The new software is downloaded automatically and rewritten at the preset time. When rewriting is possible, (Rewrite) is displayed on the standby screen. You can check the time of the update and change the time, or perform immediate rewrite. zThe default setting is “Auto-update” (date: unspecified, time: 03:00). 1i“SETTINGS”“Other settings”“Software Update”Enter your security code2“Set auto-update”“Auto-update”o (set)The new software is automatically downloaded, and (Rewrite) is displayed on the standby screen. ■To change the date and time for updatesSelect and set “Date” or “Time”o (set)■To set for notification of updates onlySelect “Only notification”o (set)If a software update is necessary, (Update) is displayed on the standby screen. ■To leave auto-update set to offSelect “Disable”o (set)“Yes”3On the standby screendSelect “ ”4“OK”Updating begins at the scheduled time.→p.381■To change the time of the updateSelect “Change” and set timeo (set)■To perform the software update immediately“Now rewrite”Enter your security codeProceed to step 2 in “Updating software immediately” (p.380). Running Software UpdateTo run Software Update, you can select (Update) that appears on the standby screen or from the menu screen. ●Selecting (Update) to perform Software Update1On the standby screendSelect “ ”2“YES”■To delete without running Software update“NO”“YES”3Enter your security codeNz (Update notification icon) appears when there is a notification from DOCOMO or if update is failed.Software Update function listＳｏｆｔｗａｒｅｕｐｄａｔｅｓｃｈｅｄｕｌｅｄｆｏｒ０３：００ＭａｋｅｓｕｒｅｂａｔｔｅｒｙｉｓｆｕｌｌｙｃｈａｒｇｅｄｂｅｆｏｒｅｈａｎｄＡｌｌｆｕｎｃｔｉｏｎｓｗｉｌｌｂｅｕｎａｖａｉｌａｂｌｅｄｕｒｉｎｇｔｈｅｕｐｄａｔｅＵｐｄａｔｅｗｉｌｌｎｏｔｓｔａｒｔｉｆｏｔｈｅｒｆｕｎｃｔｉｏｎｉｓｒｕｎｎｉｎｇＯＫＣｈａｎｇｅＮｏｗｒｅｗｒｉｔｅＳｏｆｔｗａｒｅ UｐｄａｔｅＮｏＣｈｅｃｋｆｏｒｕｐｄａｔｅ？ＹｅｓＳｏｆｔｗａｒｅ Uｐｄａｔｅ

380Appendix/External Devices/Troubleshooting4Check whether software update is requiredNow it is required to send the FOMA terminal-specific information to the server. 5The check result appears■When “Update is needed” appearsSelect “Now update” or “Reserve”Select “Now update” to update the software immediately. →p.380Select “Reserve” to update on the set time.→p.381■When “No update is needed” appears“OK”Continue using the FOMA terminal as there is no need to update the software. ●Running Software Update from the menu1i“SETTINGS”“Other settings”“Software Update”Enter your security codeThe Software update function list screen appears. 2“Update”Proceed to step 4 (p.380) in “Selecting (Update) to perform Software Update”. Updating software immediately <Now update>1Check result screen (p.380)“Now update”Select “OK” when “Start download Notice” is displayed Downloading starts immediately. Download starts after a while, even if you do not select “OK”. 2When the download ends and “Starting to rewrite” appears, select “OK”The software starts rewriting. Rewrite starts after a while, even if you do not select “OK”. It may take time to start rewriting. All keys are disabled during software rewriting. You cannot stop rewriting either. Check resultＲｅｓｅｒｖｅＣａｎｃｅｌＵｐｄａｔｅｉｓｎｅｅｄｅｄＳｏｆｔｗａｒｅ UｐｄａｔｅＮｏｗｕｐｄａｔｅＳｏｆｔｗａｒｅ UｐｄａｔｅＮｏｕｐｄａｔｅｉｓｎｅｅｄｅｄＰｌｅａｓｅｃｏｎｔｉｎｕｅｔｏｕｓｅａｓｂｅｆｏｒｅＯＫＲｅｓｅｒｖｅＣａｎｃｅｌＵｐｄａｔｅｉｓｎｅｅｄｅｄＳｏｆｔｗａｒｅ UｐｄａｔｅＮｏｗｕｐｄａｔｅＯＫＳｔａｒｔｄｏｗｎｌｏａｄＮｏｔｉｃｅ：ＮｏｆｕｎｃｔｉｏｎｓａｒｅａｖａｉｌａｂｌｅｅｘｃｅｐｔｒｅｃｅｉｖｅｃａｌｌｓＳｏｆｔｗａｒｅ UｐｄａｔｅＯＫＲｅｗｒｉｔｉｎｇ〉〉〉〉〉．．．．．書換え中再起動します書換え完了しましたＲｅａｄｙｔｏｒｅｌｏａｄＲｅｗｒｉｔｉｎｇｉｓｃｏｍｐｌｅｔｅＳｏｆｔｗａｒｅ UｐｄａｔｅＲｅａｄｙｔｏｒｅｗｒｉｔｅ？

381Continued on next pageAppendix/External Devices/TroubleshootingWhen the software is rewritten, the FOMA terminal will reload automatically. After reloading, the message “Software update is complete” is displayed, select “OK” (not display for the Auto-update). Software update is completed. Selecting the reservation date and time to update software<Reserved update>If it takes a long time to download or when the server is busy, you can select the time to startup Software update by communicating with the server beforehand. <Example: To reserve at 7:30 AM on August 16 (Saturday)> 1Check result screen (p.380)“Reserve”Select the date and time■If there is no date and time you do want to reserve“Others”→p.3822Check the selected date and time“YES”“OK”The software update is reserved. ■To change the date and/or time“NO”●At the scheduled timeThe screen on the left appears and the FOMA terminal starts the software update automatically, 5 seconds later. Charge the battery fully, put the FOMA terminal at a location with strong radio wave reception and display the standby screen before the reservation time. The rest of operation is same as “Updating software immediately <Now update>” (p.380). NzIf you stop downloading before the download is completed, the data that has been downloaded until then is deleted. zEven if the power is switched off during rewriting, it resumes when power is restored. zOnce you start downloading, the update starts automatically with no need of selecting any item such as menu. zThe screen on the right may be displayed if the server is busy. In this case, select “Reserve” to perform the reserved update. Ｓｏｆｔｗａｒｅ UｐｄａｔｅＳｏｆｔｗａｒｅｕｐｄａｔｅｉｓｃｏｍｐｌｅｔｅＯＫＲｅｓｅｒｖｅＳｅｒｖｅｒｉｓｂｕｓｙＳｏｆｔｗａｒｅ UｐｄａｔｅＲｅｓｅｒｖｅＵｐｄａｔｅｉｓｎｅｅｄｅｄＳｏｆｔｗａｒｅ UｐｄａｔｅＮｏｗｕｐｄａｔｅＣａｎｃｅｌｄａｙａｎｄｔｉｍｅＳｅｌｅｃｔｙｏｕｒｐｒｅｆｅｒｒｅｄ８／１６（Ｓａｔ）１２：５５８／１７（Ｓｕｎ）５：１２Ｏｔｈｅｒｓ８／１６（Ｓａｔ）１８：２３Ｓｏｆｔｗａｒｅ Uｐｄａｔｅ８／１６（Ｓａｔ）２：３０８／１６（Ｓａｔ）４：１８８／１６（Ｓａｔ）７：３０１／１ＹＥＳＮＯＯＫＳｏｆｔｗａｒｅ Uｐｄａｔｅ８／１６（Ｓａｔ）７：３０？ＲｅｓｅｒｖｅｆｏｒＳｏｆｔｗａｒｅ UｐｄａｔｅＲｅｓｅｒｖｅｄｆｏｒ８／１６（Ｓａｔ）７：３０ＯＫＳｏｆｔｗａｒｅｕｐｄａｔｅ：Ｒｅａｄｙｔｏｕｐｄａｔｅ？Ｓｏｆｔｗａｒｅ Uｐｄａｔｅ

382Appendix/External Devices/Troubleshooting●If you select “Others”You can select the desired date and period of time after communicating with the server if you select “Others” at step 1 in p.381. 1Select a desired dateIn the date selection display, you will see the update availability represented as shown below: ○: Available△: Almost fullNone : Full2Select an hourIn the time selection display, you will see the update availability represented as shown below: ○: Available△: Almost full×: FullSelect the period of time to display the candidates for the reservation time by communicating with the server again. 3Confirm the software update date and timeIf you check the selected date and time and select “YES”, you will communicate with the server again. The software update is reserved. ●Checking/Changing/Canceling the reservation date and time<Example: To cancel the reservation after checking it> 1i“SETTINGS”“Other settings”“Software Update”Enter your security code“Update”2“Cancel”■To accept the reservation date and time“OK”■To change the reservation date and time“Change”Once information specific to your FOMA terminal has been sent to the server, follow the procedure used when “Others” is selected.→p.382NzThe reservation time for the software update will be based on the server’s time. zWhen the reservation time for the software update is the same as the alarm notification time, priority is assigned to the software update. zWhen the reservation time comes while the other function is used, updating starts after finishing the function. zIf you perform “Initialize” after the reservation procedure is complete, the software update does not start at the scheduled time. Reschedule the time for update. ＳＭＴＷＴＦＳＳｅｌｅｃｔｐｒｅｆｅｒｒｅｄｄａｙ［２００８／８／１７（Ｓｕｎ）］ＡｖａｉｌａｂｌｅＳｏｆｔｗａｒｅ Uｐｄａｔｅ２３４５６７８１９１０１１１２１３１４１５１８２５１９２０２１２２２６２７１７２４３１１６２３２８２９３０１／３ｔｉｍｅ−ｓｌｏｔＳｅｌｅｃｔｙｏｕｒｐｒｅｆｅｒｒｅｄ２：００ − ２：５９ ○３：００ − ３：５９ ○１：００ − １：５９ △５：００ − ５：５９ △６：００ − ６：５９ ×７：００ − ７：５９ △４：００ − ４：５９ △Ｓｏｆｔｗａｒｅ Uｐｄａｔｅ０：００ − ０：５９ ○ＹＥＳＮＯＳｏｆｔｗａｒｅ Uｐｄａｔｅ８／１７（Ｓｕｎ）０：２３？ＲｅｓｅｒｖｅｆｏｒＣａｎｃｅｌＯＫＡｌｒｅａｄｙｒｅｓｅｒｖｅｄｆｏｒ８／２３（Ｓａｔ）７：３０Ｓｏｆｔｗａｒｅ UｐｄａｔｅＣｈａｎｇｅ

383Appendix/External Devices/Troubleshooting3When you see the message “Cancel this reservation?”, select “YES”At this point, information specific to your FOMA terminal is sent to the server. NTT DOCOMO will never disclose or forward your FOMA terminal information (model and manufacturer number) to a third party.After the message “The reservation is canceled” is displayed, select “OK”. The reservation is canceled. Protecting the FOMA Terminal from Harmful Data <Scanning function>First, update the pattern data for the latest data.When the FOMA terminal is downloading external files or programs from sites or i-mode mail, this function scans the data and deletes any data or cancels program activation where the data or the program could cause a fault. zPattern data is used for the check. Update the pattern data when it is upgraded because a problem has been detected.→p.384zThe Scanning function prevents the data that causes some fault from invading your FOMA terminal when viewing sites and websites or receiving mail. If the pattern data that fixes the error is not installed on your FOMA terminal or if the pattern data that fixes the fault does not exist, the Scanning function cannot prevent the error from occurring. zThe pattern data varies depending on the model of the FOMA terminal. As a matter of convenience, NTT DOCOMO may discontinue to distribute the pattern data for the model if three years have passed since it is first released. zSet the date (year, month and day) correctly on the FOMA terminal. zWhen the FOMA terminal is updating automatically or when you update the pattern data, information specific to your FOMA terminal (model, manufacturer number, etc.) is automatically sent to the server (scanning function server managed by NTT DOCOMO). NTT DOCOMO will not use that information for any purpose other than scanning function. zUpdate of pattern data will be interrupted if a voice call is received or the FOMA terminal moves out of the service area while updating the pattern data.Setting the scanning function <Set scan>When the Scanning function is set to “ON”, data and programs are automatically checked when they are executed. When the message scan is set to “ON”, the message body of SMS is automatically checked. 1i“SETTINGS”“Lock/Security”“Scanning function”The “Scanning function” screen appears. 2“Set scan”“Scan” or “Message scan”“ON”■If a message appears asking whether to change the settings “YES”* If you enable the Scanning function and it detects potentially harmful data, the event is displayed using one of 5 warning levels.→p.384NzThe Voice mail notification is not checked even when “Message scan” is set to “ON”. ＹＥＳＮＯＯＫＳｏｆｔｗａｒｅ UｐｄａｔｅＣａｎｃｅｌｔｈｉｓｒｅｓｅｒｖａｔｉｏｎ？ＴｈｅｒｅｓｅｒｖａｔｉｏｎｉｓｃａｎｃｅｌｅｄＳｏｆｔｗａｒｅ UｐｄａｔｅScanning function Ｓｅｔａｕｔｏ−ｕｐｄａｔｅＳｃａｎｎｉｎｇｆｕｎｃｔｉｏｎＳｅｔｓｃａｎＶｅｒｓｉｏｎＬｏｃｋ／ＳｅｃｕｒｉｔｙＵｐｄａｔｅ

384Appendix/External Devices/TroubleshootingUpdating pattern data <Pattern data update>1Scanning function screen (p.383)“Update”“YES”“YES”* If no pattern data update is required, the “Pattern definitions are up-to-date” message appears. Continue using your current pattern data. Updating pattern data automatically <Set auto-update>1Scanning function screen (p.383)“Set auto-update”“ON”“YES”“YES”The scanning results display■Displaying problems detected by scanningA list of up to 5 problems detected by the Scanning function is displayed, starting with the highest-level problem. If 6 or more problems were detected, the names of the 6th and subsequent problems are omitted. The rest of the problem elements (sixth and later), of which names are omitted, are displayed as follows: 1 to 9998: The remaining count is displayed as it is. 9999 or more: “Other:9999” is displayed regardless of the count. ■Results of scanningChecking the pattern data version <Version>1Scanning function screen (p.383)“Version”NzYou cannot update the pattern data when the update information is notified from the network, when other function is activated, or during i-mode communication, packet communication or international roaming. Warning level 0 Warning level 1 Warning level 2 Warning level 3 Warning level 4d (Set)…Continues the operation. d (Cancel)…Stops and cancels the operation. o (Continue)…Continues the operation.d (Set)…Stops and cancels the operation. o (Delete)…Deletes the data and cancels the operation. d (Back)…Stops and cancels the operation. d (Set)…Deletes the data and cancels the operation.NzA message other than the above may appear depending on the condition. ＹＥＳＮＯＹＥＳＮＯＵｐｄａｔｅｄｅｆｉｎｉｔｉｏｎｓ？ＵｐｄａｔｅｐａｔｔｅｒｎＵｐｄａｔｅｙｏｕｒｔｅｒｍｉｎａｌＩＤ？ＲｅａｄｙｔｏｓｅｎｄＦｏｌｌｏｗｉｎｇｐｒｏｂｌｅｍｓｗｅｒｅｄｅｔｅｃｔｅｄＰｒｏｂｌｅｍｅｌｅｍｅｎｔ１Ｐｒｏｂｌｅｍｅｌｅｍｅｎｔ２Ｐｒｏｂｌｅｍｅｌｅｍｅｎｔ３Ｐｒｏｂｌｅｍｅｌｅｍｅｎｔ４Ｐｒｏｂｌｅｍｅｌｅｍｅｎｔ５Ｏｔｈｅｒ：ｘｘｘｘＲｅｔｕｒｎＯｐｅｒａｔｉｏｎｍａｙｎｏｔｒｕｎｐｒｏｐｅｒｌｙＯｐｅｒａｔｉｏｎｍａｙｎｏｔｒｕｎｐｒｏｐｅｒｌｙＣａｎｃｅｌｏｐｅｒａｔｉｏｎ？ＯｐｅｒａｔｉｏｎｍａｙｎｏｔｒｕｎｐｒｏｐｅｒｌｙＣａｎｃｅｌｉｎｇｏｐｅｒａｔｉｏｎＯｐｅｒａｔｉｏｎｍａｙｎｏｔｒｕｎｐｒｏｐｅｒｌｙＤｅｌｅｔｅｄａｔａ？ＯｐｅｒａｔｉｏｎｍａｙｎｏｔｒｕｎｐｒｏｐｅｒｌｙＤｅｌｅｔｉｎｇｄａｔａ

385Continued on next pageAppendix/External Devices/TroubleshootingSpecifications■Phone*1: To switch networks, use “3G/GSM setting” (p.336).*2: Select size=SubQCIF (128 × 96) Quality (Quality setting)=Fine (in case of File size=10KB)*3: Varies depending on image size. *4: Record time for 1 item under the following conditions. <Phone> Select size=SubQCIF (128 × 96) Quality setting=Normal File size=2MB Movie type set=Normal<microSD card (64M bytes)>Select size=SubQCIF (128 × 96) Quality setting=Normal File size=Long time Movie type set=Normal*5: File type=AAC format*6: Background play supported*7: Up to 10M bytes of Chaku-Uta® can be separately saved to the Secret folder.*8: Shared with images, i-motion, PDF data and Screen memoModel name FOMA SO706iSize Height 105 mm × Width 49 mm × Thickness 13.4 mm (When folded)Weight Approx. 98 g (Battery pack attached)Continuous standby time FOMA/3G Stationary (“Auto”*1): Approx. 580 hrs.In transit (“3G”*1): Approx. 430 hrs.In transit (“Auto”*1): Approx. 360 hrs.GSM Stationary (“Auto”*1): Approx. 290 hrs.Continuous talk time FOMA/3G Voice communications: Approx. 220 min.Videophone: Approx. 100 min.GSM Voice communications: Approx. 190 min.Charging time AC Adapter: Approx. 120 min.DC Adapter: Approx. 120 min.Color LCD Type Display: TFT 262,144 colorsSize Display: Approx. 2.8 inchesPixels Display: 102,480 pixels (240 × 427 dots)Imaging deviceTy p e C M O SSize 1/4 inchesEffective pixels Approx. 2.0 mill. pixelsCamera Maximum recorded pixelsApprox. 1.9 mill. pixelsDigital zoom Up to approx. 4.6 ×Record Still image Approx. 1,000 photos*2Continuous mode 4 to 20*3Still image file type JPEGMovie record time Save to Phone: Approx. 276 sec.*4Save to microSD card (64M bytes): Approx. 90 min.*4Movie file type MP4Music playbackContinuous playback timei-motion Approx. 930 min.*5Chaku-Uta-Full®Approx. 1,300 min.*5*6Windows Media Audio (WMA) file Approx. 1,400 min.*6Music&Video Channel Approx. 1,500 min. (Audio)*6Approx. 350 min. (Movie)Memory Chaku-Uta®・Chaku-Uta-Full®Approx. 70M bytes*7*8

386Appendix/External Devices/Troubleshooting■Battery packNumber of Data that can be Stored/Registered/Protected on the FOMA Terminal*1: Up to 50 phonebooks can be stored on the FOMA card (UIM). *2: Actual storable, registerable or protectable counts may be decreased depending on the data size. *3: Up to 20 more received or sent SMS messages can be additionally stored on the FOMA card (UIM). →p.254*4: Up to 100 items can be additionally stored on the secret folder. *5: Pre-installed data are included. *6: Up to 10 items can be additionally stored or registered on the secret folder. Product name Battery Pack S003Battery type Lithium-ionNominal voltage 3.8V DCNominal size 770mAhItem Store/Register ProtectPhonebook 1,000 max.*1 −1Seg TV link 50 −Booking program 100 −Timer recording 100 −Schedule Schedule 500 −Holiday 100 −Anniversary 100 −To Do list 100 −Mail(SMS + i-mode)Received mail 1,000 max.*2*3*4 500 max.*2Sent mail 500 max.*2*3*4 250 max.*2Draft mail 50 max.*2 −Area Mail 100 max.*2 −Template 500 max.*2*5 −Message MessageR 100 max.*2 50 max.*2MessageF 100 max.*2 50 max.*2Bookmark i-mode 100*6 −Full Browser 100*6 −Screen memo 100 max.*2 50 max.*2i-αppli 200 max.*2(5 for mail-linked i-αppli)−ToruCa 100 max.*2 −Still image 1,000 max.*2*4 −Movie/i-motion 100 max.*2*6 −Still images recorded with 1seg 100 max.*2 −Chara-den 10*5 −Melody 200 max.*2 −Kisekae Tool 100 max.*2*5 −PDF data 400 max.*2*5 −Music&Video Channel 30 max.*2 −Music 100 max.*2 −

387Continued on next pageAppendix/External Devices/TroubleshootingSpecific Absorption Rate of Mobile Phones, etc.★Mobile Phone GSM/GPRS 900/1800/1900 & UMTS JP/EUSpecific Absorption Rate (SAR) of Mobile PhonesThis model phone FOMA SO706i meets the MIC’s*1 technical regulation for exposure to radio waves.The technical regulation established permitted levels of radio frequency energy, based on standardsthat were developed by independent scientific organizations through periodic and thorough evaluationof scientific studies. The regulation employs a unit of measurement known as the Specific AbsorptionRate, or SAR. The SAR limit is 2 watts/kilogram (W/kg)*2 averaged over ten grams of tissue. The limitincludes a substantial safety margin designed to assure the safety of all persons, regardless of ageand health. The value of the limit is equal to the international guidelines recommended by ICNIRP*3. All phone models should be confirmed to comply with the regulation, before they are available for saleto the public. The highest SAR value for this model phone FOMA SO706i is 0.739 W/kg. It was takenby the Telecom Engineering Center (TELEC), a Registered Certification Agency on the Radio Law.The test for SAR was conducted in accordance with the MIC testing procedure using standardoperating positions with the phone transmitting at its highest permitted power level in all testedfrequency bands. While there may be differences between the SAR levels of various phones and atvarious positions, they all meet the MIC’s technical regulation. Although the SAR is determined at thehighest certified power level, the actual SAR of the phone during operation can be well below themaximum value. For further information about SAR, please see the following websites: World Health Organization (WHO): http://www.who.int/peh-emf/ICNIRP: http://www.icnirp.de/MIC: http://www.tele.soumu.go.jp/e/ele/body/index.htmTELEC: http://www.telec.or.jp/ENG/Index_e.htmNTT DOCOMO: http://www.nttdocomo.co.jp/english/product/Sony Ericsson Mobile Communications Japan, Inc.: http://www.SonyEricsson.co.jp/product/SAR/ (Japanese)Association of Radio Industries and Businesses: http://www.arib-emf.org/index.html (Japanese)*1: Ministry of Internet Affairs and Communications*2: The technical regulation is provided in Article 14-2 of the Ministry Ordinance Regulating Radio Equipment.*3: International Commission on Non-lonizing Radiation ProtectionRadio Wave Exposure and Specific Absorption Rate (SAR) Information●United StatesTHIS PHONE MODEL HAS BEEN CERTIFIED IN COMPLIANCE WITH THE GOVERNMENT’SREQUIREMENTS FOR EXPOSURE TO RADIO WAVES.The SO706i mobile phones have been designed to comply with applicable safety requirements forexposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed to notexceed the limits* of exposure to radio frequency (RF) energy set by governmental authorities. Theselimits establish permitted levels of RF energy for the general population. The guidelines are based onstandards that were developed by international scientific organizations through periodic and thoroughevaluation of scientific studies. The standards include a safety margin designed to assure the safety ofall individuals, regardless of age and health.

388Appendix/External Devices/TroubleshootingThe radio wave exposure guidelines employ a unit of measurement known as the Specific AbsorptionRate (SAR). Tests for SAR are conducted using standardized methods with the phone transmitting atits highest certified power level in all used frequency bands. While there may be differences betweenthe SAR levels of various phone models, they are all designed to meet the relevant guidelines forexposure to radio waves. For more information on SAR, please refer to the safe and efficient usechapter in the User Guide.The highest SAR value as reported to the authorities for this phone model when tested for use by theear is 0.92 W/kg*, and when worn on the body is 0.55 W/kg* for speech and 0.56 W/kg* for data calls.Body worn measurements are made while the phone is in use and worn on the body with a SonyEricsson accessory supplied with or designated for use with this phone. It is therefore recommendedthat only Ericsson and Sony Ericsson original accessories be used in conjunction with Sony Ericssonphones.**Before a phone model is available for sale to the public in the US, it must be tested and certified bythe Federal Communications Commission (FCC) that it does not exceed the limit established by thegovernment-adopted requirement for safe exposure*. The tests are performed in positions andlocations (i.e., by the ear and worn on the body) as required by the FCC for each model. The FCC hasgranted an Equipment Authorization for this phone model with all reported SAR levels evaluated as incompliance with the FCC RF exposure guidelines. While there may be differences between the SARlevels of various phones, all mobile phones granted an FCC equipment authorization meet thegovernment requirement for safe exposure. SAR information on this phone model is on file at the FCCand can be found under the Display Grant section of http://www.fcc. gov/oet/ea after searching on FCCID PY7A3880003. Additional information on SAR can be found on the Cellular Telecommunications &Internet Association (CTIA) website at http://www.ctia.org/.* In the United States, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg)averaged over one gram of tissue. The standard incorporates a margin of safety to give additionalprotection for the public and to account for any variations in measurements.**This paragraph is only applicable to authorities and customers in the United States.●EuropeThis mobile phone model SO706i has been designed to comply with applicable safety requirements forexposure to radio waves. These requirements are based on scientific guidelines that include safetymargins designed to assure the safety of all persons, regardless of age and health.The radio wave exposure guidelines employ a unit of measurement known as the Specific AbsorptionRate, or SAR．Tests for SAR are conducted using standardized methods with the phone transmitting atits highest certified power level in all used frequency bands.While there may be differences between the SAR levels of various phone models, they are all designedto meet the relevant guidelines for exposure to radio waves.For more information on SAR, please refer to the safety chapter in the User’s Guide.SAR data information for residents in countries that have adopted the SAR limit recommended by theInternational Commission of Non-lonizing Radiation Protection (ICNIRP), which is 2 W/kg averagedover ten (10) gram of tissue (for example European Union, Japan, Brazil and New Zealand):The highest SAR value for this model phone tested by Sony Ericsson for use at the ear is 1.05 W/kg(10g).

389Continued on next pageAppendix/External Devices/TroubleshootingRadio Frequency (RF) Exposure and SARYour mobile phone is a low-power radio transmitter and receiver.When it is turned on, it emits low levels of radio frequency energy (also known as radio waves or radiofrequency fields).Governments around the world have adopted comprehensive international safety guidelines,developed by scientific organizations, e.g. ICNIRP (International Commission on Non-IonizingRadiation Protection) and IEEE (The Institute of Electrical and Electronics Engineers Inc.), throughperiodic and thorough evaluation of scientific studies. These guidelines establish permitted levels ofradio wave exposure for the general population. The levels include a safety margin designed to assurethe safety of all persons, regardless of age and health, and to account for any variations inmeasurements.Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energyabsorbed by the body when using a mobile phone. The SAR value is determined at the highestcertified power level in laboratory conditions, but the actual SAR level of the mobile phone whileoperating can be well below this value. This is because the mobile phone is designed to use theminimum power required to reach the network.Variations in SAR below the radio frequency exposure guidelines do not mean that there are variationsin safety. While there may be differences in SAR levels among mobile phones, all Sony Ericssonmobile phone models are designed to meet radio frequency exposure guidelines.Before a phone model is available for sale to the public, it must be tested and certified to the FCC thatit does not exceed the limit established by the government-adopted requirement for safe exposure. Thetests are performed in positions and locations (that is, at the ear and worn on the body) as required bythe FCC for each model. For body worn operation, this phone has been tested and meets FCC RFexposure guidelines when the handset is positioned a minimum of 15 mm from the body without anymetal parts in the vicinity of the phone or when used with the original Sony Ericsson body wornaccessory intended for this phone. Use of other accessories may not ensure compliance with FCC RFexposure guidelines.SAR information for this mobile phone model is included with the material that comes with this mobilephone. This information can also be found, together with more information on radio frequencyexposure and SAR, on: www.sonyericsson.comGuidelines for Safe and Efficient UsePlease read this information before using your mobile phone.These instructions are intended for your safety. Please follow these guidelines. If the product has beensubject to any of the conditions listed below or you have any doubt as to its proper function make sureyou have the product checked by a certified service partner before charging or using it. Failure to do somight entail a risk of product malfunction or even a potential hazard to your health.Recommendations for safe use of product (mobile phone, battery, charger and other accessories)□Always treat your product with care and keep it in a clean and dust-free place.□Warning! May explode if disposed of in fire.□Do not expose your product to liquid or moisture or humidity.□Do not expose your product to extremely high or low temperatures. Do not expose the battery totemperatures above +35°C (+95°F).□Do not expose your product to open flames or lit tobacco products.□Do not drop, throw or try to bend your product.

390Appendix/External Devices/Troubleshooting□Do not paint your product.□Do not attempt to disassemble or modify your product.□Do not close your product with an object inserted between keypad and display if you have aclamshell phone; this may damage your product.□Do not use your product near medical equipment without requesting permission from your treatingphysician or authorized medical staff.□Do not use your product when in, or around aircraft, or areas showing the sign “turn off two-wayradio”.□Do not use your product in an area where a potentially explosive atmosphere exists.□Do not place your product or install wireless equipment in the area above an air bag in your car.□Caution: Cracked or broken displays may create sharp edges or splinters that could be harmful uponcontact.CHILDRENKEEP OUT OF CHILDRENS REACH. DO NOT ALLOW CHILDREN TO PLAY WITH YOUR MOBILEPHONE OR ITS ACCESSORIES. THEY COULD HURT THEMSELVES OR OTHERS, OR COULDACCIDENTALLY DAMAGE THE MOBILE PHONE OR ACCESSORY. YOUR MOBILE PHONE OR ITSACCESSORY MAY CONTAIN SMALL PARTS THAT COULD BECOME DETACHED AND CREATE ACHOKING HAZARD.Power supply (Charger)Connect the AC power adapter only to designated power sources as marked on the product. Makesure the cord is positioned so that it will not be subjected to damage or stress. To reduce risk of electricshock, unplug the unit from any power source before attempting to clean it. The AC power adaptermust not be used outdoors or in damp areas. Never alter the cord or plug.BatteryWe recommend that you fully charge the battery before you use your mobile phone for the first time. Anew battery or one that has not been used for a long time could have reduced capacity the first fewtimes it is used. The battery should only be charged in temperatures between +5°C (+41°F) and +35°C(+95°F).Use only original batteries intended for use with your mobile phone. Using other batteries and chargerscould be dangerous.Talk and standby times depend on several different conditions such as signal strength, operatingtemperature, application usage patterns, features selected and voice or data transmissions when themobile phone is being used.Turn off your mobile phone before removing the battery. Do not put the battery into your mouth. Batteryelectrolytes may be toxic if swallowed. Do not let the metal contacts on the battery touch another metalobject. Doing this could short-circuit and damage the battery. Use the battery for the intended purposeonly.Personal medical devicesMobile phones may affect the operation of pacemakers and other implanted equipment. Please avoidplacing the mobile phone over the pacemaker, e.g. in your breast pocket. When using the mobilephone, use it at the ear on the opposite side of the body to the pacemaker. If a minimum distance of 22cm (8.7 inches) is kept between the mobile phone and the pacemaker, the risk of interference islimited. If you have any reason to suspect that interference is taking place, immediately turn off yourmobile phone. Contact your medical doctor for more information.For other medical devices, please consult your physician and the manufacturer of the device.

391Continued on next pageAppendix/External Devices/TroubleshootingDrivingPlease check if local laws and regulations restrict the use of mobile phones while driving or requiredrivers to use handsfree solutions.For the use of mobile phones in the vehicle, please follow instructions from vehicle manufacturers.Always pay full attention to driving and pull off the road and park before making or answering a call ifdriving conditions so require.Emergency callsMobile phones operate using radio signals, which cannot guarantee connection in all conditions. Youshould therefore never rely solely upon any mobile phone for essential communications (e.g. medicalemergencies).Emergency calls may not be possible in all areas, on all cellular networks, or when certain networkservices and/or mobile phone features are in use. Check with your local service provider.Efficient useHold your mobile phone as you would any other phone. Do not cover the hinge area when the phone isin use, as this affects call quality and may cause the phone to operate at a higher power level thanneeded, thus shortening talk and standby times.Disposal of old electrical and electronic equipmentThis symbol indicates that all electrical and electronic equipment included shall not be treated ashousehold waste. Instead it shall be left at the appropriate collection point for recycling of electrical andelectronic equipment. By ensuring this product is disposed of correctly, you will help prevent potentialnegative consequences for the environment and human health, which could otherwise be caused byinappropriate waste handling of this product. The recycling of materials will help to conserve naturalresources. For more detailed information about recycling this product, please contact your local cityoffice, your household waste disposal service or the shop where you purchased the product.Disposing of the batteryPlease check local regulations for disposal of batteries or call your local Sony Ericsson Call Center forinformation.The battery should never be placed in municipal waste. Use a battery disposal facility if available.Memory CardIf your product comes complete with a removable memory card, it is generally compatible with thehandset purchased but may not be compatible with other devices or the capabilities of their memorycards. Check other devices for compatibility before purchase or use. If your product is equipped with amemory card reader, check memory card compatibility before purchase or use.Memory cards are generally formatted prior to shipping. To reformat the memory card, use acompatible device. Do not use the standard operating system format when formatting the memory cardon a PC. For details, refer to the operating instructions of the device or contact customer support.WARNING:If your device requires an adapter for insertion into the handset or another device, do not insert thecard directly without the required adapter.

392Appendix/External Devices/TroubleshootingPrecautions on Memory Card Use□Do not expose the memory card to moisture.□Do not touch terminal connections with your hand or any metal object.□Do not strike, bend, or drop the memory card.□Do not attempt to disassemble or modify the memory card.□Do not use or store the memory card in humid or corrosive locations or in excessive heat such as aclosed car in summer, in direct sunlight or near a heater, etc.□Do not press or bend the end of the memory card adapter with excessive force.□Do not let dirt, dust, or foreign objects get into the insert port of any memory card adapter.□Check you have inserted the memory card correctly.□Insert the memory card as far as it will go into any memory card adapter needed. The memory cardmay not operate properly unless fully inserted.□We recommend that you make a backup copy of important data. We are not responsible for any lossor damage to content you store on the memory card.□Recorded data may be damaged or lost when you remove the memory card or memory cardadapter, turn off the power while formatting, reading or writing data, or use the memory card inlocations subject to static electricity or high electrical field emissions.Protection of personal informationTo safeguard your privacy and prevent information being accessible to a third party, you should eraseall personal data before selling or disposing of the product. To delete personal data, perform a masterreset, remove the memory card or format the media memory. DELETION OF MATERIAL FROM THEPHONE AND MEDIA MEMORIES DOES NOT ENSURE THAT SAID INFORMATION CANNOT BERECOVERED BY A SUBSEQUENT USER. DOCOMO/SONY ERICSSON DOES NOT WARRANTAGAINST A SUBSEQUENT USER OF THE DEVICE ACCESSING YOUR INFORMATION ANDDOES NOT ASSUME ANY RESPONSIBILITY FOR SUBSEQUENT DISCLOSURE OF SAIDINFORMATION EVEN IF A MASTER RESET AND A MEDIA MEMORY FORMAT HAS BEENPERFORMED. If you are concerned about such potential disclosure retain your device or secure itspermanent destruction.AccessoriesDOCOMO recommends use of DOCOMO’s original accessories for safe and efficient use of itsproducts. Use of third-party accessories may decrease performance or pose a risk to your health orsafety.LOUDNESS WARNING:Please adjust the audio volume cautiously when using third-party audio accessories to avoid volumelevels that may be harmful to your hearing. DOCOMO does not test use of third-party audioaccessories with this mobile phone. DOCOMO recommends using only DOCOMO’s original audioaccessories.

393Appendix/External Devices/TroubleshootingFCC Statement for the USAThis device complies with Part 15 of the FCC rules. Operation is subject to thefollowing two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference thatmay cause undesired operation.Any change or modification not expressly approved by Sony Ericsson may void the user’s authority tooperate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-- Consult the dealer or an experienced radio/TV technician for help.

394Appendix/External Devices/TroubleshootingDeclaration of Conformity for SO706iExport Administration RegulationsThis product and its accessories may be subject to the Japan Export Administration Regulations (the“Foreign Exchange and Foreign Trade Law” and its related regulations). When exporting this productand its accessories, take the required steps at your expense and under your responsibility. For moredetails, contact the Ministry of Economy, Trade and Industry (METI).

395Index/Quick ManualIndex ............................................................................................................................... 396Quick Manual .................................................................................................................. 408

396Index/Quick ManualAlphabetical/Numerical/Kana KAA mode (2in1) . . . . . . . . . . . . . . .320AC adapter. . . . . . . . . . . . . . . . . . .42Accessories/Options . . . . . . . . . .363A-Continuous mode . . . . . . . . . . .124Activating 1seg. . . . . . . . . . . . . . .210Add bookmark . . . . . . . . . . . . . . .142Add shortcut icon . . . . . . . . . . . . . .95Add to phonebook . . . . . . . . . . . .140Adding a new word (Own dictionary) . .309Adding “186”/“184”. . . . . . . . . . . . .56Additional service (network services). .324Address→Mail addressAdjusting the volume . . . . . . . . . . .61i-αppli vol. . . . . . . . . . . . . . . . . .189Ring tone . . . . . . . . . . . . . . . . . .61Volume . . . . . . . . . . . . . . . . . . . .61After returning to Japan . . . . . . . .335After-sales service . . . . . . . . . . . .375Alarm details (check). . . . . . . . . . 290Alarm notificationPriority . . . . . . . . . . . . . . . . . . . 289Reconnection. . . . . . . . . . . . . . . 58Signal quality . . . . . . . . . . . . . . . 85Alarm notification actions . . 290, 295Alarm setting . . . . . . . . . . . . . . . . 289Alarm tonepre-installed . . . . . . . . . . . . . . . . 82stop . . . . . . . . . . . . . . . . . . . . . 289Alarm (Timer) . . . . . . . . . . . . . . . 284Animation (create). . . . . . . . . . . . 230Animation (playback). . . . . . . . . . 231Answer hold. . . . . . . . . . . . . . . . . . 62Answer setting. . . . . . . . . . . . . . . . 60Any key answer . . . . . . . . . . . . . . . 60Area Mail (Early warning) . . . . . . 181Area Mail setting . . . . . . . . . . . . . 182Area Mail (Storage capacity). . . . 386AT Commands. . . . . . . . . . . . . . . 329Attach fileDownload selectively . . . . . . . . 166Save . . . . . . . . . . . . . . . . . . . . 166Send . . . . . . . . . . . . . . . . . . . . 160Auto answer setting . . . . . . . . . . 299Auto Decomail-picture (download). . 146Auto power ON/OFF . . . . . . . . . . . 45Auto receive (Mail/Message) . . . 162Auto redial as voice . . . . . . . . . . . 67Auto replay (i-motion) . . . . . . . . . 152Auto reset total cost . . . . . . . . . . 294Auto save set (Movie) . . . . . . . . . 127Auto save set (Still image) . . . . . 123Auto timer . . . . . . . . . . . . . . . . . . 128Auto-display setting . . . . . . . . . . 148Auto-sort settings (Mail) . . . . . . . 174Auto-start set (i-αppli) . . . . . . . . . 197Auto-start time (i-αppli) . . . . . . . . 197Auto-update (Software Update). . . 379AV Phone To function . . . . . . . . . 147Available services overseas . . . . 333IndexAnswer hold. . . . . . . . . . . . . . . . . . . . . . 62. . . . . . . . . . . . . . . . . . . . 60Answer settingAny key answer . . . . . . . . . . . . . . . . . . . 60Initialize → ResetIntellectual property right. . . . . . . . . . . . 20Holding (during incoming call, talking). . . .62Holiday (check) . . . . . . . . . . . . . . . . . . .287Home URL (i-mode) . . . . . . . . . . . . . . .148RestrictionDial lock/Omakase Lock . . . . . . . . . .101IC card lock setting . . . . . . . . . . . . . .206Keypad lock . . . . . . . . . . . . . . . . . . .110ResetAuto reset total cost . . . . . . . . . . . . . 294Keypad light setting . . . . . . . . . . . . . . . . 90Keypad lock. . . . . . . . . . . . . . . . . . . . . 110Keypad sound . . . . . . . . . . . . . . . . . . . . 85Index search <Example 1: To set the keypad lock to “ON”> <Example 2: When you cannot answer a received call immediately> <Example 3: When the keyword is described by another term>zThis index has the function as an alphabetical list of contents. Not only can you find the words in this manual, but you can also the words that summarizes content of description. Try to search for another keyword if the words that wants to know is not collected. z“Function menu” index comes after “Alphabetical/Numerical/Kana” index. When you search the item of function menu (p.37), use this index.

397Index/Quick ManualKBB mode (2in1). . . . . . . . . . . . . . . 320Background play. . . . . . . . . . . . . 280Backlight. . . . . . . . . . . . . . . . . . . . 90Bar code reader . . . . . . . . . . . . . 129Bar incoming when roam (Overseas) . . 338Basic channel (i-Channel) . . . . . 153Basic operation . . . . . . . . . . . . . . 34BatteryAttaching/removing the battery pack . . 41Battery pack life . . . . . . . . . . . . 41Charging the FOMA terminal . . 41Checking battery level. . . . . . . . 44Low-voltage alarm . . . . . . . . . . 44Power saver mode . . . . . . . . . . 90Usage time . . . . . . . . . . . . . . . . 42Blocking noise (Noise reduction) . . 58Booking programG-GUIDE EPG Remote Control. . 1941seg . . . . . . . . . . . . . . . . . . . . 214Bookmark. . . . . . . . . . . . . . . . . . 142Copy from microSD to Phone . . 249Copy from Phone to microSD . . 248PIM data display . . . . . . . . . . . 247Saving the attached file . . . . . 167Send attach file. . . . . . . . . . . . 160Storage capacity. . . . . . . . . . . 386BrightnessCamera . . . . . . . . . . . . . . . . . . 123My picture . . . . . . . . . . . . . . . . 232Videophone. . . . . . . . . . . . . . . . 50Brightness (Edit image) . . . . . . . 232KCCA certificate . . . . . . . . . . . . . . . 138Cable connection (USB). . . . . . . 260Cache. . . . . . . . . . . . . . . . . . . . . 139Calculator . . . . . . . . . . . . . . . . . . 295Calendar (standby screen). . . . . . 89Call acceptation (Restrictions) . . 112Call charge (setting the upper limit) . . 294Call Forwarding . . . . . . . . . . . . . 314Call forwarding (Restrictions) . . . 112Call Forwarding(Int.). . . . . . . . . . 338Call rejection (Restrictions) . . . . 112Call setting w/o ID . . . . . . . . . . . 114Call Waiting . . . . . . . . . . . . . . . . 313Caller ID NotificationBasic setting . . . . . . . . . . . . . . . 46Caller ID Request. . . . . . . . . . . . 316Caller ID req. (Int.) . . . . . . . . . . . 338CameraActivate . . . . . . . . . . . . . . . . . .118Guide to the shooting screen . . . 121How to use the camera . . . . . . 118Key operation . . . . . . . . . . . . . .121Notes on using . . . . . . . . . . . . .118Shooting settings . . . . . . . . . . .128When using the microSD card . . . 119Canceling operation. . . . . . . . . . . .35case conversion. . . . . . . . . . . . . .306CD-ROM for FOMA SO706i . . . .329Chaku-moji . . . . . . . . . . . . . . . . . .55Chaku-Uta-Full®Acquire. . . . . . . . . . . . . . . . . . .272Move among Phone/microSD. . .250Play . . . . . . . . . . . . . . . . . . . . .273Pre-installed data . . . . . . . . . . . .82Save . . . . . . . . . . . . . . . . . . . . .272Chance capture . . . . . . . . . . . . . .128Change i-mode Password . . . . . .141Change rcv. type (mail) . . . . . . . .157Change security code . . . . . . . . .101Change size (Edit image) . . . . . .232Change skin. . . . . . . . . . . . . . . . .279Changing menu icon . . . . . . . . . . .91Changing the certificate host. . . .151Changing the main menu . . . . . . .33Changing the Ring Tone . . . . . . . .84Changing window (Entering text divided screen) . . . . . . . . . . . . . .303Channel list (i-Channel). . . . . . . .153Channel setting (One-Seg) . . . . . 209Chapter list . . . . . . . . . . . . . . . . .270CharacterChanging the conversion range . .305Common phrases. . . . . . . . . . .307Convert. . . . . . . . . . . . . . . . . . .305Copy. . . . . . . . . . . . . . . . . . . . .308Cut . . . . . . . . . . . . . . . . . . . . . .308Delete. . . . . . . . . . . . . . . . . . . .307Kuten code . . . . . . . . . . . . . . . .309Line feed . . . . . . . . . . . . . . . . .306Paste . . . . . . . . . . . . . . . . . . . .309Pict/Sym continuous entry . . . .306Single-byte/Double-byte . . . . . .306Switching upper/lower case . . .306Type/thickness/size . . . . . . . . . .93Character assignment (5-touch/2-touch). . .350Character entry . . . . . . . . . . . . . .301Clear learned . . . . . . . . . . . . . .310Download dictionary setting . . . 3102-touch . . . . . . . . . . . . . . . . . . .3105-touch. . . . . . . . . . . . . . . . . . . 304Character entry (edit) screen . . . 302Character input mode (5-touch/2-touch). . . 303Character stamp (Edit image) . . . 232Chara-denDisplay. . . . . . . . . . . . . . . . . . . 237Download. . . . . . . . . . . . . . . . . 146For videophone . . . . . . . . . . . . . 66Guide to the Chara-den list . . . 237Operation. . . . . . . . . . . . . . . . . 238Shooting . . . . . . . . . . . . . . . . . 239Storage capacity . . . . . . . . . . . 386What is Chara-den?. . . . . . . . . 237Chara-den setting . . . . . . . . . . . . . 50Chara-den settings priority . . . . . . 71Charge (setting the upper limit). . 294Charge sound . . . . . . . . . . . . . . . . 85Charging the FOMA terminal . . . . 41Check i-mode settings . . . . . . . . 148Check new messagesMail/Message . . . . . . . . . . . . . 164Set . . . . . . . . . . . . . . . . . . . . . . 179Check new SMS . . . . . . . . . . . . . 184Confirm SettingsRestrictions . . . . . . . . . . . . . . . 113Ring tone/Image . . . . . . . . . . . . 78Checking an address list. . . . . . . 177Checking call times and charges. . 293Checking the i-αppli information . . 189Checking the i-motion details . . . 152CHG camera-mode. . . . . . . . . . . 122Choku-Den . . . . . . . . . . . . . . . . . . 78Clear learned (Character entry). . . 310Client certificate . . . . . . . . . . . . . 138Clock Alarm Tone set . . . . . . . . . . 85Clock display . . . . . . . . . . . . . . . . . 93Clock display setting (indicator display). . . 92Clock setting . . . . . . . . . . . . . . . . . 45Close-up mode . . . . . . . . . . . . . . 118CLR (t) key . . . . . . . . . . . . . . . 35Column search (Phonebook) . . . . 74Common phrases . . . . . . . . . . . . 359Communication mode . . . . . . . . . 251Component names and functions . . 24Composite image (4 images) . . . 230Continuous mode . . . . . . . . . . . . 124Continuous standby time . . . . . . . 42Continuous talk time . . . . . . . . . . . 42Convert readings to kanji . . . . . . 305Cookie settings . . . . . . . . . . . . . . 222CopyCharacter. . . . . . . . . . . . . . . . . 308

398Index/Quick ManualFrom microSD to Phone . . . . . .249From Phone to microSD . . . . . .248To the different folder in the microSD . . .250Copy to microSDImages, etc. . . . . . . . . . . . . . . .249Phonebook, etc. (PIM data) . . .248Copy to PhoneImages, etc. . . . . . . . . . . . . . . .250Phonebook, etc. (PIM data) . . .249Copy to the FOMA terminalImages, etc. . . . . . . . . . . . . . . .250Phonebook, etc. (PIM data) . . .249Copyright . . . . . . . . . . . . . . . . . . . .20Correct backlight (Edit image) . . .232Cost limit setting. . . . . . . . . . . . . .294Country code . . . . . . . . . . . . . . . .332Cut (Text) . . . . . . . . . . . . . . . . . . .308KDData BoxFolder structure . . . . . . . . . . . .224Folder (create/delete/edit) . . . .253Data broadcast. . . . . . . . . . . . . . .212Data Communication . . . . . . . . . .325Data exchange (OBEX™ connection). . .326Data security serv. . . . . . . . . . . . .115Image . . . . . . . . . . . . . . . . . . . .229Mail. . . . . . . . . . . . . . . . . . . . . .176Phonebook . . . . . . . . . . . . . . . . .79Datalink software→DOCOMO keitai datalinkDate setting . . . . . . . . . . . . . . . . . .45DC adapter. . . . . . . . . . . . . . . . . . .42Deco-mailCompose/send . . . . . . . . . . . . .158Compose/send (Template) . . . .159Decomail-picture (download) . . . .146Decorate PI . . . . . . . . . . . . . . . . .157DeleteBookmark . . . . . . . . . . . . . . . . .143Channel list. . . . . . . . . . . . . . . .210Character . . . . . . . . . . . . . . . . .307Chara-den. . . . . . . . . . . . . . . . .238Cookie (Full Browser). . . . . . . .222Delete all bookmarks . . . . . . . .142Delete all images (own data) . .253Delete all mails (read/received/sent) . .173Delete all melodies (own data) . .253Delete all movies (own data) . .253Document . . . . . . . . . . . . . . . . .262Document viewer . . . . . . .262, 266Download dictionary . . . . . . . . .310Folder (microSD) . . . . . . . . . . .253Folder (Phone) . . . . . . . . . . . . . 253i-αppli . . . . . . . . . . . . . . . . . . . . 188Image. . . . . . . . . . . . . . . . . . . . 229Kisekae Tool. . . . . . . . . . . . . . . 243Mail . . . . . . . . . . . . . . . . . 175, 176Melody . . . . . . . . . . . . . . . . . . . 242Message . . . . . . . . . . . . . . . . . 180Movie/i-motion . . . . . . . . . . . . . 234Music . . . . . . . . . . . . . . . . . . . . 274Music&Video Channel . . . . . . . 270Own dictionary . . . . . . . . . . . . . 309PDF data . . . . . . . . . . . . . . . . . 262Phonebook (detail screen). . . . . 76Phonebook (list screen) . . . . . . . 74Playlist (music). . . . . . . . . . . . . 275Received calls . . . . . . . . . . . . . . 54Record message/Voice memo/VP message . . . 66Redial/Dialed calls . . . . . . . . . . . 54Screen memo . . . . . . . . . . . . . 144shortcut icon . . . . . . . . . . . . . . . 96Storage area . . . . . . . . . . . . . . 215Template . . . . . . . . . . . . . . . . . 160Text memo . . . . . . . . . . . . . . . . 296To Do list . . . . . . . . . . . . . . . . . 288ToruCa . . . . . . . . . . . . . . . . . . . 205URL history . . . . . . . . . . . . . . . 142Video . . . . . . . . . . . . . . . . . . . . 236Voice . . . . . . . . . . . . . . . . . . . . 2931seg (Booking program/Timer recording) . . 215Delete receiver . . . . . . . . . . . . . . 157Description (Operation procedure). . 36Desktop holder . . . . . . . . . . . . . . . 43Dial lock. . . . . . . . . . . . . . . . . . . . 102Dialed calls . . . . . . . . . . . . . . . . . . 53Dictionary . . . . . . . . . . . . . . . . . . 296Dictionary setting (Download dictionary). . . 310Dictionary (download) . . . . . . . . . 146Digital broadcasting. . . . . . . . . . . 208DisplayBacklight . . . . . . . . . . . . . . . . . . 90Color pattern/background . . . . . 91Font . . . . . . . . . . . . . . . . . . . . . . 93How to view the display . . . . . . . 27Shield view. . . . . . . . . . . . . . . . . 90Display design . . . . . . . . . . . . . . . . 91Display during dialing/receiving calls. . . 88Display during dialing/receiving videophone calls . . . . . . . . . . . . . . 88Display during mail/message checking . . . 88Display operator name (Overseas). . 337Display setting . . . . . . . . . . . . . 67, 88Display when the FOMA terminal is turned on . . 88Display while receiving a call . . . . 59Displaying menu . . . . . . . . . . . . . . 91Displaying SSL pages. . . . . . . . . 138Disp. call/receive No. . . . . . . . . . . 90Disp. phonebook image . . . . . . . . 89Disp. Software info (i-αppli). . . . . 186DOCOMO CA certificate. . . . . . . 138DOCOMO keitai datalink . . . . . . 329Document viewer . . . . . . . . . . . . 263Display. . . . . . . . . . . . . . . . . . . 263Guide to the document list . . . 263Operation. . . . . . . . . . . . . . . . . 263Scroll . . . . . . . . . . . . . . . . . . . . 264Searching for text . . . . . . . . . . 264Double-byte . . . . . . . . . . . . . . . . 306DownloadChaku-Uta-Full® . . . . . . . . . . . 272Chara-den . . . . . . . . . . . . . . . . 146Charged contents . . . . . . . . . . 144Client certificate. . . . . . . . . . . . 150Decomail®-picture . . . . . . . . . . 146Dictionary . . . . . . . . . . . . . . . . 146i-αppli . . . . . . . . . . . . . . . . . . . 186Image . . . . . . . . . . . . . . . . . . . 144i-melody. . . . . . . . . . . . . . . . . . 145i-motion . . . . . . . . . . . . . . . . . . 152Kisekae Tool . . . . . . . . . . . . . . 146PDF data . . . . . . . . . . . . . . . . . 145Template . . . . . . . . . . . . . . . . . 146ToruCa. . . . . . . . . . . . . . . . . . . 146Download dictionary setting . . . . 310Downloading charged contents. . . 144Downloading remaining dataChaku-Uta-Full® . . . . . . . . . . . 272i-motion . . . . . . . . . . . . . . . . . . 233Kisekae Tool . . . . . . . . . . . . . . 242Downloading the program. . . . . . 269DPOF setting . . . . . . . . . . . . . . . 252Driving mode→Public modeDual mode (2in1) . . . . . . . . . . . . 320Dual Network . . . . . . . . . . . . . . . 316KEEarly warning “Area Mail” . . . . . . 181Earphone/microphone with switch. . 298Earpiece volume adjustment . . . . 61Earthquake early warning. . . . . . 181Easy search . . . . . . . . . . . . . . . . . . 4EditDraft mail. . . . . . . . . . . . . . . . . 161Image . . . . . . . . . . . . . . . . . . . 231Movie/i-motion. . . . . . . . . . . . . 235

399Index/Quick ManualPhonebook . . . . . . . . . . . . . . . . 76Edit file nameImage . . . . . . . . . . . . . . . . . . . 228Melody . . . . . . . . . . . . . . . . . . 241Movie/i-motion . . . . . . . . . . . . 234Edit image . . . . . . . . . . . . . . . . . 231Edit titleBar code reader . . . . . . . . . . . 130Bookmark . . . . . . . . . . . . . . . . 143Chara-den. . . . . . . . . . . . . . . . 238Document . . . . . . . . . . . . . . . . 262Download dictionary . . . . . . . . 310Image . . . . . . . . . . . . . . . . . . . 228Melody . . . . . . . . . . . . . . . . . . 241microSD . . . . . . . . . . . . . . . . . 248Movie/i-motion . . . . . . . . . . . . 233Music&Video Channel . . . . . . 271Original animation. . . . . . . . . . 231PDF data. . . . . . . . . . . . . . . . . 262Screen memo . . . . . . . . . . . . . 144Shortcut icon. . . . . . . . . . . . . . . 95Template . . . . . . . . . . . . . . . . . 160Video. . . . . . . . . . . . . . . . . . . . 236Edit (Mail) . . . . . . . . . . . . . . . . . . 176English display . . . . . . . . . . . . . . . 45English Guidance. . . . . . . . . . . . 316Entering a mail address from the address list. . . . . . . . . . . . . . . . . 156Entering a mail address from the phonebook . . . . . . . . . . . . . . . . . 156Entering common phrases . . . . . 307Entering numbers. . . . . . . . . . . . . 35Entering security code . . . . . . . . . 35Enter/add an address. . . . . . . . . 156Erase/play memo (voice/movie) . . 65Error message list . . . . . . . . . . . 368Export administration regulations . . 394KFFace marks list . . . . . . . . . . . . . . 358Favorite channel (i-Channel) . . . 153FeliCa. . . . . . . . . . . . . . . . . . . . . 202FeliCa mark (e)Acquire ToruCa . . . . . . . . . . . . 204IC card authentication. . . . . . . 111iC communication . . . . . . . . . . 259Osaifu-Keitai . . . . . . . . . . . . . . 203File attached mail. . . . . . . . . . . . 160File restriction. . . . . . . . . . . . . . . 228File size . . . . . . . . . . . . . . . . . . . 122Filter functionMail . . . . . . . . . . . . . . . . . . . . . 175Message. . . . . . . . . . . . . . . . . .180To Do list . . . . . . . . . . . . . . . . .288ToruCa . . . . . . . . . . . . . . . . . . .205FirstPass setting . . . . . . . . . . . . .150Flash movie . . . . . . . . . . . . . . . . .140Folder lock . . . . . . . . . . . . . . . . . .112Folder (create/delete/edit)Bookmark. . . . . . . . . . . . . . . . .142Data Box . . . . . . . . . . . . . . . . .253Mail. . . . . . . . . . . . . . . . . . . . . .173microSD . . . . . . . . . . . . . . . . . .253FOMA card (UIM)Add to phonebook . . . . . . . . . . .70Functional differences . . . . . . . . 40Insert/remove . . . . . . . . . . . . . . .39Managing SMS. . . . . . . . . . . . .254Managing the phonebook entry. . .254Manufacturer number. . . . . . . . 137Operational restriction function. . . 39Security code . . . . . . . . . . . . . .100Setting for replacing . . . . . . . . . .40Font . . . . . . . . . . . . . . . . . . . . . . . .93Font sizeCHG input size. . . . . . . . . . . . .303Font . . . . . . . . . . . . . . . . . . . . . .93Font size (i-mode) . . . . . . . . . .148Font size (Mail). . . . . . . . . . . . .178Phonebook (Big font/Standard font) . . .74Ticker size setting (i-Channel) . .154Format (microSD) . . . . . . . . . . . .251Forward (Mail) . . . . . . . . . . . . . . .165Forwarding image . . . . . . . . . . . .260Frame (Edit image) . . . . . . . . . . .232Framed photography . . . . . . . . . .126Full Browser. . . . . . . . . . . . . . . . .217How to view the screen . . . . . .218Operations on the screen. . . . .219Full Browser settings . . . . . . . . . .221Function display. . . . . . . . . . . . . . .32Function menu. . . . . . . . . . . . . . . .37KGGo to location . . . . . . . . . . . . . . .141GPRS network. . . . . . . . . . . . . . .332Group search (Phonebook) . . . . . . 74GSM network. . . . . . . . . . . . . . . .332Guide to screensDocument view. . . . . . . . . . . . .263Full Browser . . . . . . . . . . . . . . .218Music Player. . . . . . . . . . . . . . .277PDF data . . . . . . . . . . . . . . . . .262Rec. Chara-den . . . . . . . . . . . .239Shooting . . . . . . . . . . . . . . . . . 121ToruCa display. . . . . . . . . . . . . 204Videophone . . . . . . . . . . . . . . . . 491seg. . . . . . . . . . . . . . . . . . . . . 210Guide to the PDF list. . . . . . . . . . 262Guide to the shooting screen (camera). . 121KHHandling with care . . . . . . . . . . . . 18Hands-free switch (videophone) . . 67Hands-free (switch during a call). . . 52Header/Signature . . . . . . . . . . . . 179Headset sw to dial. . . . . . . . . . . . 298Headset usage setting . . . . . . . . . 85High-speed Ir send (IrSS) . . . . . . 258Holding (during incoming call, talking). . 62Holiday (check) . . . . . . . . . . . . . . 287Home URL (i-mode) . . . . . . . . . . 148Host selection (i-mode). . . . . . . . 149How to refer to this manual . . . . . . . 2How to use the function keys . . . . 32How to view the main menu . . . . . 29KIi-αppli . . . . . . . . . . . . . . . . . . . . . 185Adjusting the volume . . . . . . . . 189Auto-start set . . . . . . . . . . . . . . 197Auto-start time . . . . . . . . . . . . . 197Checking the security error history. . . 189Delete . . . . . . . . . . . . . . . . . . . 188Download. . . . . . . . . . . . . . . . . 186Installed software. . . . . . . . . . . 190Launch (from a site/mail). . . . . 197Storage capacity . . . . . . . . . . . 386Upgrade. . . . . . . . . . . . . . . . . . 199i-αppli infoLaunch/quit . . . . . . . . . . . . . . . 187Mail-linked i-αppli. . . . . . . . . . . 186What is an i-αppli?. . . . . . . . . . 186i-αppli stand-by screenEnd stand-by info. . . . . . . . . . . 199Release . . . . . . . . . . . . . . . . . . 199Set . . . . . . . . . . . . . . . . . . . . . . 198IC card authentic. . . . . . . . . . . . . 111IC card lock setting . . . . . . . . . . . 206iC communication . . . . . . . . . . . . 259FeliCa mark (e) . . . . . . . . . . 259Send/Receive all data . . . . . . . 260Send/receive one data. . . . . . . 259IC lock (power-off). . . . . . . . . . . . 206iC Transfer Service . . . . . . . . . . . 202iC trans. all (iC communication). . . 260

400Index/Quick Manuali-Channel setting . . . . . . . . . . . . .154Icon descriptionActivate 1seg screen . . . . . . . .210Display . . . . . . . . . . . . . . . . . . . .27Document viewer . . . . . . . . . . .263i-αppli . . . . . . . . . . . . . . . . . . . .189Image . . . . . . . . . . . . . . . . . . . .139Image/movie. . . . . . . . . . . . . . .226Kisekae Tool . . . . . . . . . . . . . . .243Mail detail screen . . . . . . . . . . .172Mail folder list screen . . . . . . . .171Mail list screen . . . . . . . . . . . . .171Melody . . . . . . . . . . . . . . . . . . .241MessageR/F screens . . . . . . . .180Music . . . . . . . . . . . . . . . . . . . .273Music&Video Channel screen. . .269My shortcut (paste). . . . . . . . . . .94My shortcut (providing information) . .94Overseas use . . . . . . . . . . . . . .333PDF data . . . . . . . . . . . . . . . . .262Received calls/missed calls . . . .53Redial/Dialed calls . . . . . . . . . . .53Ring tone/Image . . . . . . . . . . . . .77Shooting menu . . . . . . . . . . . . .122Shooting screen (camera) . . . .121Text entry (edit) screen. . . . . . .302Tool bar (Document view). . . . .263Tool bar (PDF data) . . . . . . . . .264TV link list . . . . . . . . . . . . . . . . .213Vibrator. . . . . . . . . . . . . . . . . . . .84Video player . . . . . . . . . . . . . . .236Videophone screen. . . . . . . . . . .49Icon operationIcons setting . . . . . . . . . . . . . . . .96My shortcut icon . . . . . . . . . . . . .95Icons setting. . . . . . . . . . . . . . . . . .96Illumination flash (shooting) . . . . .119Illumination priority. . . . . . . . . . . . .93Illumination set. . . . . . . . . . . . . . . .92Illumination (for missed call/new mail) . .64ImageCopy from microSD to Phone. .250Copy from Phone to microSD. .249Delete . . . . . . . . . . . . . . . . . . . .229Display (microSD). . . . . . . . . . .248Display (Phone) . . . . . . . . . . . .225Download . . . . . . . . . . . . . . . . .144Edit . . . . . . . . . . . . . . . . . . . . . .231Move. . . . . . . . . . . . . . . . . . . . .228Save (from site/message). . . . .144Saving the attached file . . . . . .167Send attach file. . . . . . . . . . . . .160Shooting. . . . . . . . . . . . . . . . . . 123Size . . . . . . . . . . . . . . . . . . . . . 119Storage capacity . . . . . . . . . . . 386Switching list display mode . . . 226Titles and file names . . . . . . . . 228Image display in the picture list . . . 35Image effect (Edit image) . . . . . . 231Image priority . . . . . . . . . . . . . . . . 83Image stamp (Edit image) . . . . . . 232i-melody (download) . . . . . . . . . . 145iMenu. . . . . . . . . . . . . . . . . . . . . . 136i-mode host . . . . . . . . . . . . . . . . . 149i-mode infoDisplaying SSL pages . . . . . . . 138Image display. . . . . . . . . . . . . . 139Jumping to previous/next pages . . 139Operations for viewing sites . . . 139Scroll function . . . . . . . . . . . . . 139Start/exit. . . . . . . . . . . . . . . . . . 136Viewing the iMenu screen . . . . 136What is i-mode?. . . . . . . . . . . . 136i-mode mail →maili-mode malfunction check . . . . . . 377i-mode menu . . . . . . . . . . . . . . . . 136i-mode password . . . . . . . . . . . . . 100i-mode settings . . . . . . . . . . . . . . 148i-mode settings (reset). . . . . . . . . 148i-motionAutomatic replay . . . . . . . . . . . 152Copy from microSD to Phone. . . 250Copy from Phone to microSD. . . 249Delete . . . . . . . . . . . . . . . . . . . 234Download. . . . . . . . . . . . . . . . . 152Edit. . . . . . . . . . . . . . . . . . . . . . 235Folder (create/delete/edit) . . . . 253Move . . . . . . . . . . . . . . . . . . . . 234Move among Phone/microSD . . 250Playback (microSD) . . . . . . . . . 248Playback (Phone). . . . . . . . . . . 233Save (from site) . . . . . . . . . . . . 152Saving the attached file . . . . . . 167Send attach file . . . . . . . . . . . . 160Storage capacity . . . . . . . . . . . 386Trimming (Edit i-motion) . . . . . . 235What is i-motion? . . . . . . . . . . . 151Inbox . . . . . . . . . . . . . . . . . . . . . . 170In-Call Function Selection . . . . . . 317In-car Hands-free . . . . . . . . . . . . . 59Incoming Call Mng . . . . . . . . . . . 317Indicator display (setting) . . . . . . . 92Info notice setting . . . . . . . . . . . . . 64Infrared data exchange. . . . . . . . 257High-speed Ir send (IrSS™) . . 258Infrared data port. . . . . . . . . . . 257Send/Receive all Ir data . . . . . 258Send/receive Ir data . . . . . . . . 258Infrared remote control . . . . . . . . 261Initial setting . . . . . . . . . . . . . . . . . 45Initialize. . . . . . . . . . . . . . . . . . . . 300Initialize→ResetIntellectual property right . . . . . . . 20International Access Code . . . . . 334International calls . . . . . . . . . . . . . 51International ID Code . . . . . . . . . 334International roaming . . . . . . . . . 332Internet connection. . . . . . . . . . . 141Interval/number for shooting (continuous mode) . . . . . . . . . . . 125Int’l dial assistance . . . . . . . . . . . . 52ISP connection . . . . . . . . . . . . . . 149KJJAN code . . . . . . . . . . . . . . . . . . 129KKKey operationHolding down. . . . . . . . . . . . . . . 26How to use the function keys . . 32Key names and functions . . . . . 24Short cut key function . . . . . . . . 30Key (Character assignment) . . . . 350Keypad light setting . . . . . . . . . . . 90Keypad lock . . . . . . . . . . . . . . . . 110Kisekae ToolDownload . . . . . . . . . . . . . . . . 146Manage . . . . . . . . . . . . . . . . . . 242Set. . . . . . . . . . . . . . . . . . . . . . . 97Storage capacity . . . . . . . . . . . 386Kuten code . . . . . . . . . . . . . . . . . 309Kuten code list→Refer to the provided CD-ROMKLLarge Menu. . . . . . . . . . . . . . . . . . 33Launching i-αppli from a mail . . . 198Launching i-αppli from a site . . . 198Launching i-αppli from Data broadcast. . 198Launching i-αppli from IC card . . 198Launching i-αppli from ToruCa . . 198Launching i-αppli with Infrared data exchange . . . . . . . . . . . . . . 198Launching i-αppli with the Bar code reader . . . . . . . . . . . . . . . . 198Lens selector switch . . . . . . . . . . 118

401Index/Quick ManualLight setting (backlight) . . . . . . . . 90Line feed. . . . . . . . . . . . . . . . . . . 306Location information. . . . . . . . . . 148Lock functionCall setting w/o ID. . . . . . . . . . 114Dial lock/Omakase Lock . . . . . 101IC card authentic. . . . . . . . . . . 111IC card lock setting . . . . . . . . . 206Keypad lock . . . . . . . . . . . . . . 110Mail box lock/Folder lock. . . . . 112Original lock . . . . . . . . . . . . . . 106Reject unknown . . . . . . . . . . . 114Restrictions . . . . . . . . . . . . . . . 112Ring time (sec.). . . . . . . . . . . . 114Secret (data only) mode . . . . . 103Secret folder . . . . . . . . . . . . . . 104Self mode . . . . . . . . . . . . . . . . 115Side key guard . . . . . . . . . . . . 112Lower case. . . . . . . . . . . . . . . . . 306KMMacro lens . . . . . . . . . . . . . . . . . 118Mail addressSearch (Phonebook). . . . . . . . . 74Store (receiver’s/sender’s address) . . 166Mail address storing. . . . . . . . . . 166Mail box lock. . . . . . . . . . . . . . . . 112Mail infoChanging the list screen display mode. . . 170Changing the mail character size. . 170Compose/send . . . . . . . . . . . . 156Displaying mail menu . . . . . . . 156Guide to the folder list screens . . 171Guide to the mail detail screens. . 172Guide to the mail list screens . . 171Mail display (Mail box) . . . . . . 170Read out mail . . . . . . . . . . . . . 168Viewing new i-mode mail . . . . 163What is i-mode Mail? . . . . . . . 156When you receive a message. . 162Mail message (send/receive)Auto receive mail . . . . . . . . . . 162Edit . . . . . . . . . . . . . . . . . . . . . 176Forward. . . . . . . . . . . . . . . . . . 165Receive option . . . . . . . . . . . . 164Reply. . . . . . . . . . . . . . . . . . . . 165Resend . . . . . . . . . . . . . . . . . . 176Send (from a site/mail) . . . . . . 147Sending draft i-mode mail. . . . 161View (new message). . . . . . . . 163Mail settingsAuto-sort settings . . . . . . . . . . 174Check settings . . . . . . . . . . . . .178Display during sending/receiving mails. . . 88Mail box lock/Folder lock . . . . .112Mail Setting . . . . . . . . . . . . . . .178Mail/Msg. ring time. . . . . . . . . . .85Reset mail settings. . . . . . . . . .178Set check new messages. . . . .179Mail To function . . . . . . . . . . . . . .147Mail (compose)Change rcv. type . . . . . . . . . . .157Delete receiver . . . . . . . . . . . . .157Entering an address from Mail member . . . 156Saving i-mode mail. . . . . . . . . .161Send attach file . . . . . . . . . . . .160Mail (manage)Copy from microSD to Phone. . .249Copy from Phone to microSD. . .248Delete. . . . . . . . . . . . . . . .175, 176Display (Inbox) . . . . . . . . . . . . .170Folder (create/delete/edit) . . . .173Move (among folders) . . .175, 176No. of messages . . . . . . . 173, 175PIM data display. . . . . . . . . . . .247Protect ON/OFF . . . . . . . .175, 176Saving the attached file . . . . . .166Search . . . . . . . . . . . . . . . . . . .175Storage capacity . . . . . . . . . . .386Storing addresses in mail members . .162View (unread mail) . . . . . . . . . .163Mail (Ring tone)Adjusting the volume . . . . . . . . .61Priority . . . . . . . . . . . . . . . . . . . .83Ring time . . . . . . . . . . . . . . . . . .85Select . . . . . . . . . . . . . . . . . . . . .82Mail-linked i-αppli. . . . . . . . . . . . .186Main menu change . . . . . . . . . . . .91Main menu (sort) . . . . . . . . . . . . .284Making phone calls . . . . . . . . . . . .48Chaku-moji . . . . . . . . . . . . . . . . .55Choku-Den. . . . . . . . . . . . . . . . .79Dialing . . . . . . . . . . . . . . . . . . . .48Earphone/microphone with switch. .299From site/mail. . . . . . . . . . . . . .147International calls . . . . . . . . . . . .51Overseas Use . . . . . . . . . . . . .335Phonebook. . . . . . . . . . . . . . . . .73Received calls . . . . . . . . . . . . . .53Redial/Dialed calls . . . . . . . . . . .53Two-touch dialing . . . . . . . . . . . .79Malfunction check (i-mode) . . . . .377Malfunction checklist . . . . . . . . . .364Manner mode . . . . . . . . . . . . . . . .86Manner mode set . . . . . . . . . . . . . 86Manner mode when earphones are connected . . . 87Marker stamp (Edit image) . . . . . 232Marking a checkbox . . . . . . . . . . . 38M-Continuous mode . . . . . . . . . . 124MelodyCopy from microSD to Phone . . 250Copy from Phone to microSD . . 249Delete . . . . . . . . . . . . . . . . . . . 242Download. . . . . . . . . . . . . . . . . 145Folder (create/delete/edit) . . . . 253Move . . . . . . . . . . . . . . . . . . . . 242Operations during playback. . . 241Playback (microSD). . . . . . . . . 248Playback (Phone) . . . . . . . . . . 240Playlist . . . . . . . . . . . . . . . . . . . 242Pre-installed data. . . . . . . . . . . . 82Save (from site) . . . . . . . . . . . . 145Saving the attached file . . . . . . 166Send attach file . . . . . . . . . . . . 160Storage capacity . . . . . . . . . . . 386Titles and file names . . . . . . . . 241Melody Call setting . . . . . . . . . . . . 84Melody linkage (vibrator). . . . . . . . 84Memory card→microSDMemory infoBooking list . . . . . . . . . . . . . . . 215Chara-den list . . . . . . . . . . . . . 238Document list. . . . . . . . . . . . . . 262Image list . . . . . . . . . . . . . . . . . 228Melody list . . . . . . . . . . . . . . . . 241Movie list . . . . . . . . . . . . . . . . . 234Movie mode. . . . . . . . . . . . . . . 127PDF list . . . . . . . . . . . . . . . . . . 262Still image/continuous mode . . 123Video list . . . . . . . . . . . . . . . . . 236Memory No. search (Phonebook) . . 74Menu display set . . . . . . . . . . . . . . 91Menu function list . . . . . . . . . . . . 340Menu numbers for function display. . . 32Menu operation description. . . . . . 36MessageAuto receive mail . . . . . . . . . . . 162Delete . . . . . . . . . . . . . . . . . . . 180No. of messages . . . . . . . . . . . 180Protect ON/OFF. . . . . . . . . . . . 180Set check new messages . . . . 179Storage capacity . . . . . . . . . . . 386View (read/new message) . . . . 180Message display (Mail settings) . . 178Message infoIcon description . . . . . . . . . . . . 180

402Index/Quick ManualWhen you receive a message. . .179Message list display . . . . . . . . . . .148Message (Ring tone)Adjusting the volume . . . . . . . . .61Ring time . . . . . . . . . . . . . . . . . .85Select . . . . . . . . . . . . . . . . . . . . .82microSDData that can be copied . . . . . .246Displaying images, etc.. . . . . . .248Displaying phonebook ,etc. (PIM data) . .247Folder structure . . . . . . . . . . . .244Folder (create/delete/edit) . . . .253Format . . . . . . . . . . . . . . . . . . .251Handling with care . . . . . . . . . .243Insert/remove . . . . . . . . . . . . . .244Storage capacity. . . . . . . . . . . .246microSD card→microSDmicroSD data (i-αppli) . . . . . . . . .200microSD manager . . . . . . . . . . . .247microSD mode . . . . . . . . . . . . . . .251microSD reader/writer . . . . . . . . .252microSD software. . . . . . . . . . . . .199Missed callCheck . . . . . . . . . . . . . . . . . . . . .64Checking the number of missed calls. . .53Illumination information. . . . . . . .64Record . . . . . . . . . . . . . . . . . . . .53Setting the notification tone . . . .64Missed calls display . . . . . . . . . . .114Mobile phone manufacturer number. . .137Movable contents. . . . . . . . . . . . .250Move (among folders)Bookmark . . . . . . . . . . . . . . . . .143Image . . . . . . . . . . . . . . . . . . . .228Mail. . . . . . . . . . . . . . . . . .175, 176Melody . . . . . . . . . . . . . . . . . . .242Movie/i-motion . . . . . . . . . . . . .234Music . . . . . . . . . . . . . . . . . . . .274ToruCa . . . . . . . . . . . . . . . . . . .205Move (among Phone/microSD)Chaku-Uta-Full®. . . . . . . . . . . .250Movie/i-motion . . . . . . . . . . . . .250MovieCopy from microSD to Phone. .250Copy from Phone to microSD. .249Delete . . . . . . . . . . . . . . . . . . . .234Edit . . . . . . . . . . . . . . . . . . . . . .235Move. . . . . . . . . . . . . . . . . . . . .234Move among Phone/microSD. .250Movie playing software (for PC). . .363Playback (microSD) . . . . . . . . .248Playback (Phone) . . . . . . . . . . .233Playlist . . . . . . . . . . . . . . . . . . . 234Send attach file . . . . . . . . . . . . 160Shooting. . . . . . . . . . . . . . . . . . 126Shooting time. . . . . . . . . . . . . . 120Storage capacity . . . . . . . . . . . 386Titles and file names . . . . . . . . 228Movie mode. . . . . . . . . . . . . . . . . 126MTP mode. . . . . . . . . . . . . . . . . . 252Multi access . . . . . . . . . . . . . . . . 282Multi access combination patterns . . 360Multi Number. . . . . . . . . . . . . . . . 319Multi window . . . . . . . . . . . . . . . . 140Multiple-choice . . . . . . . . . . . . . . . 38Multitask . . . . . . . . . . . . . . . . . . . 283Music Player . . . . . . . . . . . . . . . . 277Guide to Music Player screen . . 277Operations during playback . . . 278Play . . . . . . . . . . . . . . . . . . . . . 273Playlist . . . . . . . . . . . . . . . . . . . 275Music&Video Channel. . . . . . . . . 268Music&Video Channel (Storage capacity). . 386My document. . . . . . . . . . . . . . . . 261My Menu . . . . . . . . . . . . . . . . . . . 141My pictureDisplay . . . . . . . . . . . . . . . . . . . 225Folder (create/delete/edit) . . . . 253My ProfileChecking your own phone number. . . 46Display . . . . . . . . . . . . . . . . . . . 290Send attach file . . . . . . . . . . . . 160Store . . . . . . . . . . . . . . . . . . . . 291My select . . . . . . . . . . . . . . . . . . . . 92My select display. . . . . . . . . . . . . . 31KNName search (Phonebook) . . . . . . 74Network re-search (Overseas) . . 337Network security code. . . . . . . . . 100Network services. . . . . . . . . . . . . 311Additional service. . . . . . . . . . . 324Call Forwarding . . . . . . . . . . . . 314Call Forwarding(Int.) . . . . . . . . 338Call Waiting . . . . . . . . . . . . . . . 313Caller ID Request . . . . . . . . . . 316Caller ID req. (Int.) . . . . . . . . . . 338Dual Network . . . . . . . . . . . . . . 316English Guidance. . . . . . . . . . . 316Multi Number . . . . . . . . . . . . . . 319Nuisance Call Blk. . . . . . . . . . . 315OFFICEED. . . . . . . . . . . . . . . . 324Remote access(Int.). . . . . . . . . 338Remote Control . . . . . . . . . . . . 318Roam. Guidance (Int.). . . . . . . 338Service Numbers. . . . . . . . . . . 317Voice Mail . . . . . . . . . . . . . . . . 312Voice Mail(Int.). . . . . . . . . . . . . 3382in1 . . . . . . . . . . . . . . . . . . . . . 320New mailDisplay. . . . . . . . . . . . . . . . . . . 163Illumination information . . . . . . . 64Setting the notification tone. . . . 64Noise reduction. . . . . . . . . . . . . . . 58Notes on shooting. . . . . . . . . . . . 118Notice designate calls. . . . . . . . . 294Notification toneCharging . . . . . . . . . . . . . . . . . . 85Key . . . . . . . . . . . . . . . . . . . . . . 85Missed call/new mail . . . . . . . . . 64Notify Caller ID . . . . . . . . . . . . . . . 56Calling with “186”/“184” added. . . 56Setting for each dial. . . . . . . . . . 56Now update (Software update). . 380No. of messagesMail . . . . . . . . . . . . . . . . . 173, 175Message . . . . . . . . . . . . . . . . . 180Screen memo . . . . . . . . . . . . . 144Template . . . . . . . . . . . . . . . . . 160Ntfy switch-mode . . . . . . . . . . . . . 67Nuisance Call Blk . . . . . . . . . . . . 315Nuisance Call Blocking priority . . 116Number of data that can be protected . . 386Number/Address A (2in1) . . . . . . 320Number/Address B (2in1) . . . . . . 320NW search mode (Overseas) . . . 336KOOBEX™ connection . . . . . . 260, 326OFFICEED . . . . . . . . . . . . . . . . . 324Omakase Lock . . . . . . . . . . . . . . 102Online timer recording (Gガイド番組表リモコン) . . . . . 194Open tab setting (i-mode). . . . . . 148Operation description in this manual. . . 36Operation descriptions . . . . . . . . . 36Operation for incoming calls when the Public mode is set. . . . . . . . . . 63Operations during playbackMelody. . . . . . . . . . . . . . . . . . . 241Music Player . . . . . . . . . . . . . . 278Video player . . . . . . . . . . . . . . 237Optional equipment . . . . . . . . . . . 22Options/Accessories. . . . . . . . . . 363Original animation (playback) . . . 231Original animations (create) . . . . 230

405Index/Quick ManualSet connection timeout (i-mode). . 149Set hold tone . . . . . . . . . . . . . . . . 62Set i-αppli To . . . . . . . . . . . . . . . 197Set image disp. (i-mode) . . . . . . 148Set in-call arrival. . . . . . . . . . . . . 317Set main time . . . . . . . . . . . . . . . . 46Set mute seconds . . . . . . . . . . . 114Set sub clock . . . . . . . . . . . . . . . . 46Set time . . . . . . . . . . . . . . . . . . . . 45Setting backlight. . . . . . . . . . . . . . 90Setting the clock display (standby screen) . . 93Setting when folded . . . . . . . . . . . 61Shield view . . . . . . . . . . . . . . . . . . 90ShootingCompose message. . . . . . . . . 126Continuous mode . . . . . . . . . . 124Movie . . . . . . . . . . . . . . . . . . . 126Still image . . . . . . . . . . . . . . . . 123Shooting indicator (Flashing) . . . 119Shooting menu icons . . . . . . . . . 122Shooting settings . . . . . . . . . . . . 128Short cut key function. . . . . . . . . . 30Short message→SMSShot image (display). . . . . . . . . . 225Side key guard . . . . . . . . . . . . . . 112Signal strength (Reception level) . . 44Silent (Erase)Recorded memo/voice memo . . 65Ring volume . . . . . . . . . . . . . . . 61Voice announce . . . . . . . . . . . 293Simple Menu . . . . . . . . . . . . . . . . 33Simple Menu function list . . . . . . 349Single-byte . . . . . . . . . . . . . . . . . 306SMSCompose/send . . . . . . . . . . . . 182Copy from microSD to Phone . . 249Copy from Phone to microSD . . 248Preview (sent mail) . . . . . . . . . 183Receive. . . . . . . . . . . . . . . . . . 183SMS center selection . . . . . . . . . 184SMS input char. . . . . . . . . . . . . . 183SMS report req. . . . . . . . . . . . . . 183SMS settings . . . . . . . . . . . . . . . 178SMS valid. per. . . . . . . . . . . . . . . 183SoftwareDOCOMO keitai datalink . . . . 329Software key→Function keySoftware Update . . . . . . . . . . . . 377Sort→Sort function, Filter functionSort functionDocument . . . . . . . . . . . . . . . . 262Image . . . . . . . . . . . . . . . . . . . 228Mail. . . . . . . . . . . . . . . . . . . . . .175Melody . . . . . . . . . . . . . . . . . . .242Message. . . . . . . . . . . . . . . . . .180Movie/i-motion . . . . . . . . . . . . .234Music . . . . . . . . . . . . . . . . . . . .274PDF data . . . . . . . . . . . . . . . . .262Phonebook. . . . . . . . . . . . . . . . .74Template. . . . . . . . . . . . . . . . . .160To Do list . . . . . . . . . . . . . . . . .288ToruCa . . . . . . . . . . . . . . . . . . .205Sound effect . . . . . . . . . . . . . . . . .84Sound effect (i-mode) . . . . . . . . .148Specific absorption rate (SAR) . . 387Specifications . . . . . . . . . . . . . . .385Standard lens . . . . . . . . . . . . . . .118Standard type i-motion . . . . . . . .151Standby screenDisplay setting . . . . . . . . . . . . . .89Priority . . . . . . . . . . . . . . . . . . . .89Return to the standby screen. . .35Standby screen (i-αppli) . . . . . . .198Start attachment (auto) (Mail settings) . .178Start attachment (auto) (Message) . . . 148Still imageCopy from microSD to Phone. . .250Copy from Phone to microSD. . .249Display (microSD) . . . . . . . . . .248Display (Phone) . . . . . . . . . . . .225Edit. . . . . . . . . . . . . . . . . . . . . .231Shooting. . . . . . . . . . . . . . . . . .123Storage capacity . . . . . . . . . . .119Storage capacity for music data. . .386Storage capacity for screen memo . . . 386Storage capacity (respective data) . . . 386Store common phrases . . . . . . . .308Storing phone number/mail address on sites . . . . . . . . . . . . .140Storing receiver’s address (Mail address). . . . 166Storing WMA data . . . . . . . . . . . .276Storing/displaying personal data . .290Streaming type i-motion. . . . . . . .151Style-Up® panel. . . . . . . . . . . . . . . .9Sub-address setting. . . . . . . . . . . .58Super silent . . . . . . . . . . . . . . . . . .86Switch to BGM. . . . . . . . . . . . . . .280Switching pages . . . . . . . . . . . . . .34Switching screens (Text entry divided screen) . . . . . . . . . . . . . .303Switching the network . . . . . . . . .336Symbols list . . . . . . . . . . . . . . . . .352KTTab display setting. . . . . . . . 148, 221Te m p l a t eDownload. . . . . . . . . . . . . . . . . 146No. of messages . . . . . . . . . . . 160Storage capacity . . . . . . . . . . . 386Text memo. . . . . . . . . . . . . . . . . . 296Text reader . . . . . . . . . . . . . . . . . 131Theme change . . . . . . . . . . . . . . . 91Ticker . . . . . . . . . . . . . . . . . . . . . 153Ticker color setting . . . . . . . . . . . 154Ticker display setting. . . . . . . . . . 154Ticker speed setting . . . . . . . . . . 154Time signal (Indicator display) . . . 92Timer (Alarm) . . . . . . . . . . . . . . . 284Title list (Image) . . . . . . . . . . . . . 226Title list (Movie). . . . . . . . . . . . . . 233TLS . . . . . . . . . . . . . . . . . . . . . . . 218To Do list . . . . . . . . . . . . . . . . . . . 288Alarm notification actions . . . . 290Check . . . . . . . . . . . . . . . . . . . 289Clock Alarm Tone set. . . . . . . . . 85Copy from microSD to Phone . . 249Copy from Phone to microSD . . 248Storage capacity . . . . . . . . . . . 386Store . . . . . . . . . . . . . . . . . . . . 288To n eCharge sound . . . . . . . . . . . . . . 85Keypad sound . . . . . . . . . . . . . . 85Missed calls/New mail . . . . . . . . 64ToruCa . . . . . . . . . . . . . . . . . . . . 203Acquire . . . . . . . . . . . . . . . . . . 204Copy from microSD to Phone . . 250Copy from Phone to microSD . . 249Display. . . . . . . . . . . . . . . . . . . 204Display (microSD) . . . . . . . . . . 248Download. . . . . . . . . . . . . . . . . 146Guide to the screen . . . . . . . . . 204Saving the attached file . . . . . . 167Send attach file . . . . . . . . . . . . 160Set . . . . . . . . . . . . . . . . . . . . . . 206Storage capacity . . . . . . . . . . . 386ToruCa viewer . . . . . . . . . . . . . . . 204Trademark . . . . . . . . . . . . . . . . . . . 20Trimming (Edit image). . . . . . . . . 232Turning the FOMA terminal on/off . . 44TV link. . . . . . . . . . . . . . . . . . . . . 213TV remote control . . . . . . . . . . . . 261Two-touch dialing . . . . . . . . . . . . . 79

406Index/Quick ManualKUUIM→FOMA cardUIM operation . . . . . . . . . . . . . . .254Universal Number International ID Code. . .334Updating playback restrictions (Uta-hodai). .272Updating Software . . . . . . . . . . . .377Upgrade (i-αppli) . . . . . . . . . . . . .199Upper case. . . . . . . . . . . . . . . . . .306URL entry. . . . . . . . . . . . . . . . . . .141URL history . . . . . . . . . . . . .138, 141USB cable connection . . . . . . . . .260USB mode setting . . . . . . . . . . . .251Use phone information (i-mode). . .149Using SSL Certificates. . . . . . . . .149KVVersion (Pattern data) . . . . . . . . .384Vibrator . . . . . . . . . . . . . . . . . . . . .84Vibrator priority . . . . . . . . . . . . . . .84VideoDelete . . . . . . . . . . . . . . . . . . . .236Play. . . . . . . . . . . . . . . . . . . . . .235Video player. . . . . . . . . . . . . . . . .235VideophoneAnswer mode during i-mode. . . .67Auto redial as voice . . . . . . . . . .67Chara-den setting. . . . . . . . . . . .50External devices . . . . . . . . . . . . .68Hands-free switch. . . . . . . . . . . .67How to view the screen . . . . . . .49Making videophone calls . . . . . .48Play/erase recorded messages. . .65Receiving . . . . . . . . . . . . . . . . . .59Select image. . . . . . . . . . . . . . . .67Using Chara-den . . . . . . . . . . . .66Visual preference . . . . . . . . . . . .67When a call is not connected . . .50Videophone (Ring tone)Adjusting the volume . . . . . . . . .61Select . . . . . . . . . . . . . . . . . . . . .82Videophone/voice phone switch (Caller) . .50Videophone/voice phone switch (Receiver) . .60View styleHow to view the screen (One-Seg). . . . . . . . . . . . . . . . .210How to view the screen(Video player) . . . . . . . . . . . . . .236Operation (One-Seg) . . . . . . . .211Operation (Video player). . . . . .237Viewer settings. . . . . . . . . . . . . . .226Viewing sitesBookmark. . . . . . . . . . . . . . . . . 142From site/mail . . . . . . . . . . . . . 147Full Browser. . . . . . . . . . . . . . . 218i-Channel . . . . . . . . . . . . . . . . . 153i-mode . . . . . . . . . . . . . . . . . . . 136Multi window . . . . . . . . . . . . . . 140My Menu . . . . . . . . . . . . . . . . . 141Screen memo . . . . . . . . . . . . . 143URL history . . . . . . . . . . . 138, 141Voice announce. . . . . . . . . . . . . . 293Voice clock . . . . . . . . . . . . . . . . . . 64Voice Mail . . . . . . . . . . . . . . . . . . 312Voice mail (Restrictions) . . . . . . . 112Voice Mail(Int.). . . . . . . . . . . . . . . 338Voice memo. . . . . . . . . . . . . . . . . 292Voice memo(in-call). . . . . . . . . . . 292Voice mode . . . . . . . . . . . . . . . . . 128Voice monitor. . . . . . . . . . . . . . . . . 64Voice/videophone switch (Caller). . . 50Voice/videophone switch (Receiver). . 60V-phone while packet . . . . . . . . . . 67KWWake-up display setting . . . . . . . . 88Warranty and after-sales service. . 375WEB Mail . . . . . . . . . . . . . . . . . . 157Web To function. . . . . . . . . . . . . . 147Website . . . . . . . . . . . . . . . . . . . . 141What is Area Mail? . . . . . . . . . . . 181What is i-Channel? . . . . . . . . . . . 153When the shooting is interrupted. . 119White balance . . . . . . . . . . . . . . . 123Word prediction . . . . . . . . . . . . . . 303WORLD CALL. . . . . . . . . . . . . . . . 51WORLD WING . . . . . . . . . . . 40, 332KZZoom adjustment . . . . . . . . . . . . 128KNumerical1seg . . . . . . . . . . . . . . . . . . . . . . 207Alarm notification actions. . . . . 290Channel list . . . . . . . . . . . . . . . 209Channel setting . . . . . . . . . . . . 209Data broadcast . . . . . . . . . . . . 212G-GUIDE EPG Remote Control . . 212Guide to the 1seg screen. . . . . 210Play a recording. . . . . . . . . . . . 235Program guide i-αppli. . . . . . . . 212Record . . . . . . . . . . . . . . . . . . . 213Timer activation/recording . . . . 214TV link . . . . . . . . . . . . . . . . . . . 213User settings . . . . . . . . . . . . . . 215Watch . . . . . . . . . . . . . . . . . . . 2101seg viewing time (battery) . . . . 422in1. . . . . . . . . . . . . . . . . . . . . . . 3202-touch (Character assignment) . . 3512-touch (Character entry) . . . . . . 3103G network . . . . . . . . . . . . . . . . . 3323G/GSM setting . . . . . . . . . . . . . 3364 images composite (Edit image) . 2305-touch (Character assignment) . . 3505-touch (Character entry) . . . . . . 30464K data communication . . . . . . 326KKanaｉアプリバンキング. . . . . . . . . . 196iD設定アプリ . . . . . . . . . . . . . . . 195拡大メニュー (Kisekae Tool) . . . . 97圏外 (out-of-service area). . . . . . . 44Gガイド番組表リモコン. . . . . . . 194地図アプリ (Map i-αppli) . . . . . . 190DCMXクレジットアプリ . . . . . . 195デコ絵つくーる (deco-e maker) . . 190ドコモテレビ電話ソフト (DOCOMO Videophone Software) . . . . . . . . . 68はじめてのおつかい for SO . . . . 190FOMA通信環境確認アプリ. . . . . 196楽オク出品アプリ2 (Rakuten Auction application 2) . . . . . . . . . . . . . . . 196Function menuAlarmDetail . . . . . . . . . . . . . . . . . . . . 285List. . . . . . . . . . . . . . . . . . . . . . 285Bar code readerReading data detail . . . . . . . . . 130Reading data list . . . . . . . . . . . 130Scanning . . . . . . . . . . . . . . . . . 130BookmarkFolder list. . . . . . . . . . . . . . . . . 142List. . . . . . . . . . . . . . . . . . . . . . 143Calculator . . . . . . . . . . . . . . . . . . 295Channel list. . . . . . . . . . . . . . . . . 154Character entry (edit) . . . . . . . . . 306Chara-denList. . . . . . . . . . . . . . . . . . . . . . 238Player . . . . . . . . . . . . . . . . . . . 238Shooting . . . . . . . . . . . . . . . . . 240Choku-Den . . . . . . . . . . . . . . . . . . 79Common phrasesFolder list. . . . . . . . . . . . . . . . . 308

408Index/Quick ManualQuick ManualHow to use the Quick ManualThe Quick Manual describes basic operations and displays of the FOMA terminal. To use the Quick Manual embedded in this manual, cut the sheets along the cutting line and fold them as described below. Take the Quick Manual (For Overseas Use) when using international roaming (WORLD WING) abroad. ■How to cutCut the Quick Manual sheets along the cutting line.Use a ruler to cut along the cutting line as described below. Detach one page at a time so that you do not tear other pages. * Take care not to hurt yourself when cutting with scissors, etc. ■How to foldFold the Quick Manual along with the folding line as described below so that the front cover comes to the front. Cut hereCoverCoverCover

Cutting lineQuick Manual○For Inquiries <DOCOMO Information Center>For DOCOMO mobile phone: (No prefix) 151 (toll free) (only in Japanese)* You cannot call this number from an ordinary (landline) phone. From an ordinary (landline) phone: 0120-005-250 (toll free) (in English)* Can be called from mobile phones and PHSs. ●Check the phone number carefully before calling. ○For Technical InquiriesFor DOCOMO mobile phone: (No prefix) 113 (toll free) (only in Japanese)* You cannot call this number from an ordinary (landline) phone. From an ordinary (landline) phone: 0120-800-000 (only in Japanese)* Can be called from mobile phones and PHSs. ●Check the phone number carefully before calling. ●For details, check the “Service station list” provided with the FOMA terminal. Add to phonebooki➜“PHONEBOOK”➜u (FUNC)➜“Add to phonebook”●To add data from the received calls recordOn the Standby screen➜h➜Received calls record entry➜u (FUNC) ➜ “Add to phonebook”●To add data from the redialOn the Standby screen➜j➜Select the redial➜u (FUNC) ➜ “Add to phonebook”Select the destination➜Enter a name➜Check the reading of the name➜d (Set) Select items and enter them■Group (00 to 19, No Group)<Not stored>➜Select a group■Phone number (up to 4)<Not stored>➜Enter phone number➜Select an icon1 2 3 ■Mail address (up to 3)<Not stored>➜Enter mail address➜Select an icon■Address<Not stored>➜Enter zip code➜Enter address■Birthday<Not stored>➜Enter birthday■Memorandums<Not stored>➜Enter memorandums■Image<Not stored>➜Select the photo mode or image■Chara-den<Not stored>➜Select Chara-den■Memory number (000 to 999)➜Enter memory numbero (Finish)Only name, reading, group, phone number and mail address can be stored to the FOMA card (UIM). Edit/delete phonebook data■Edit the phonebook dataDisplay the phonebook detail screen➜u (FUNC)➜ “Edit Phonebook”➜Edit the items if necessary➜o (Finish)➜“YES” (For the FOMA card (UIM), press o (Finish) and select “Overwrite”➜“YES”)■Delete phonebook dataDisplay the phonebook list screen➜u (FUNC)➜ “Delete data”➜“Delete this”➜“YES” (Select “YES” again depending on the phonebook)4 Character entry■Character entry (edit) screenCharacter entry areaList areaInformation display area■Switch text entry modeu (FUNC)➜“Input method”➜“Input mode”■Enter dakuten, han-dakutenw (one time or more)■Enter “、” or “。”q (one time or more)■Change input modesp (Chrct) (one time or more, Selected mode highlights)●Single-byte→→→●Double-byte→→→24153

Cutting line■Enter pictograph and symbol continuouslyp (Pict/Sym)➜Select pictograph or symbol➜u (Close) or t after entering■Clear characterUse b to move the cursor onto the character to clear ➜t ■Enter space0 (one time or more)j (Only when the cursor is at the end of the text)■Insert a line feedqg (Only when the cursor is at the end of the text)■Switch the upper case/lower case of entered textrEnter “携帯” on Text memo■Character entry (edit) screeni➜“LIFEKIT”➜“Text memo”➜o (Edit)➜ o (Chrct) (one time or more)➜Switch to “Kanji/hiragana input mode”➜■Character conversiong➜b➜Select “携帯” from the candidatesけ➜2 4 times, い➜1 twice, た➜4 once, い➜1 twiceCamera■Shoot still imagei➜“LIFEKIT”➜“Camera”➜“Photo mode”➜d (Record)➜d (Save)■Continuous modei➜“LIFEKIT”➜“Camera”➜“Photo mode”➜u (FUNC)➜“CHG camera-mode”➜“Continuous mode”➜“Auto” or “Manual”➜d (Cont. /Record)➜u (FUNC)➜Select saving method■Movie modei➜“LIFEKIT”➜“Camera”➜“Movie mode”➜d (Record)➜d (Stop)➜d (Save)1seg■Registering the channel listi➜“1SEG”➜“Channel setting”➜“Select area”➜Select area➜Select prefecture■Switching channel listsi➜“1SEG”➜“Channel list”➜Select channel list■Viewing 1segi➜“1SEG”➜“Active 1Seg”■Recording 1segOn the 1Seg screen, press o (1 second or longer)➜oDisplay still image/movie/play melody■Displaying a still imagei➜“DATA BOX”➜“My picture”➜Select folder➜Select still image■Playing a moviei➜“DATA BOX”➜“i-motion”➜Select folder➜Select movie■Playing a melodyi➜“DATA BOX”➜“Melody”➜Select folder➜Select melodyUsing the Music Player■Playing the Musici➜“DATA BOX”➜“Music”➜Select folder➜Select musicMaking/receiving videophone call■Make a videophone callEnter the phone number➜o (V.phone)➜ y after talking■Receiving a videophone callWhen the ring tone sounds and the illumination flashes, press r➜y after talking■During a callo: Switches handsfree on/offd (Change): Switches between substitute image and camera image10 119786

Cutting lineMain item Sub item Branch itemSETTINGS Incoming call Manner mode setDisp. Phonebook imageAnswer settingMail/Msg. ring timeRing time(sec.) Info notice setting Record message Disp. call/receive No.Melody Call settingTalk Noise reductionQuality alarm Reconnect signal Set hold toneSetting when folded Dialing Pause dial Sub-address settingPrefix settingMain item Sub item Branch itemSETTINGS Dialing Headset sw to dialInt’l dial assistanceVideophone Visual preferenceSelect imageAuto redial as voiceDisplay settingNtfy switch-modeHands-free switchV-phone while packetDisplay Display settingBacklight Display designFontMy shortcutSelect languageMy selectionMenu display setMain item Sub item Branch itemSETTINGS Display Viewer settingsIcons descriptionIcons settingShield viewMail tickerIllumination settingCall time/Charge Call dataNotice designate callsReset total Auto reset total costClock Set main timeSet sub clockClock displayAlarm settingClock Alarm Tone setAuto power ONAuto power OFFLock/SecurityLock Dial lockOriginal lockIC card lock settingKeypad lockSelf modeMain item Sub item Branch itemSETTINGS Lock/SecuritySecret mode Secret data only modeReject unknownCall setting w/o ID Change security code IC card authentic.PIN settingScanning functioni-mode common set Set connection timeoutSet check new messagesHost selection SMS center selectionCertificateCertificate hosti-αppli settings Disp. Software infoEnd stand-by displayi-αppli vol.Main item Sub item Branch itemSETTINGS External connection USB mode settingHeadset usage settingSelect microphoneAuto answer settingInt’l roaming set NW search mode3G/GSM settingDisplay operator nameOther settings Keypad sound Charge soundBattery levelSide key guardCharacter input setHolding down ch-keyReset settings InitializeSoftware UpdateMain item Sub item Branch itemDATA BOX My picture MusicMusic&Video Channeli-motionMelody1SegMy documentChara-denKisekae ToolDocument viewerLIFEKIT Bar code readerReceive Ir data microSD managerCameraData security serv.Schedule Alarm To Do list 22 232119 2018

Cutting lineServices available for the FOMA terminal*1: Unlisted phone numbers cannot be given. *2: An emergency call to the local fire station or police station may not be connected in some areas. In that case, call again from a public phone or land line. Directory assistance(charged: service charge + call charge)*1(No area code) 104Telegram (pay: telegram charge)(No area code) 115Time (pay)(No area code) 117Weather forecast (pay)Area code of an area you want to know + 177Emergency call to the police*2(No area code) 110Emergency call for a fire engine or an ambulance*2(No area code) 119Emergency call for help with maritime accidents(No area code) 118Emergency Message Recording System (pay)(No area code) 171Collect call(charged: service charge + call charge)(No area code) 106Main icons: Signal strength: i-mode in progress: SSL-compatible page displayed: Unread mailIcon display area: Unread Message R: Mail kept at the i-mode Center: When Dial lock is set: When IC card lock is set: Communication mode set (USB cable connected): Ir data exchange in progress: microSD card inserted: During a voice call: Battery level: Vibrator is set: “Ring volume” is set to “Silent”: Manner mode is set: Public mode (Driving mode) is set: Music&Video Channel reservation is set/ : Alarm is set: 1seg timer recording in progress to , : Voice mail message to : Record message is set to : Record message (Record VP message) is set: Backlight is set to “OFF”: Keypad lock is set/ready: Side key guard is set to “ON”<Contact for lost, etc>Omakase Lock• Omakase Lock is a pay service. If you subscribe to the service at the same time with the subscription of suspending the service or while the service is suspended, no charge applies. Set/Release Omakase Lock0120-524-36024 hours available (only in Japanese)* Omakase Lock can be set/released from the My docomo site on a PC, etc. Other contacts<Contact: ＞<Contact: ＞<Contact: ＞* Check the phone number carefully before dialing. 34 353331 3230

Cutting lineQuick Manual (For Overseas Use)○For lost, stolen, charge accumulation, etc. overseas<DOCOMO Information Center> (24 hours) (Only in Japanese)●For DOCOMO mobile phone-81-3-5366-3114* (toll free)* When you make a call from an ordinary phone, etc., the call charge applies. * When calling from the SO706i, dial +81-3-5366-3114 (press and hold the “0” key for 1 second or longer to enter “+”).●For ordinary phone, etc. <Universal Number> -800-0120-0151* * Local call charge may apply in the country you are staying. * Refer to p.9 for the International call access code of main countries (Table 1) and p.10 for the International Prefix number for the universal number (Table 2). International call access code of the country (Table 1)International Prefix number for the universal number (Table 2)○For malfunctions overseas<Network Technical Support and Operation Center> (24 hours)●For DOCOMO mobile phone-81-3-6718-1414* (toll free)* When you make a call from an ordinary phone, etc., the call charge applies. * When calling from the SO706i, dial +81-3-6718-1414 (press and hold the “0” key for 1 second or longer to enter “+”).●For ordinary phone, etc. <Universal Number> -800-5931-8600* * Local call charge may apply in the country you are staying. * Refer to p.9 for the International call access code of main countries (Table 1) and p.10 for the International Prefix number for the universal number (Table 2). International call access code of the country (Table 1)International Prefix number for the universal number (Table 2)Before travelingi-mode settings■Setting in Japano➜“iMenu”➜“English”➜“Options”➜“International Settings”➜“i-mode services Settings”➜“Yes”➜Enter i-mode password➜“Select”■Setting abroado➜“iMenu”➜“English”➜“International Settings”➜“i-mode services Settings”➜“Yes”➜Enter i-mode password➜“Select”Remote Control■Setting in Japani➜“SERVICE”➜“Remote Control”➜“Activate”➜“YES”■Setting abroadi➜“SERVICE”➜“Service(Int.)”➜“Remote access (Int.)”➜“YES”➜Follow the audio guidanceSetting time adjustmenti➜“SETTINGS”➜“Clock”➜“Set main time”➜“Auto time adjust”➜Select “Auto” in “Auto time” and “Auto time difference”Setting sub clock displayi➜“SETTINGS”➜“Clock”➜“Set sub clock”➜“display method”➜“Auto”Available Services Overseas• Voice/videophone calls • i-mode mail• i-mode (including Full Browser) • Sending/Receiving SMS• i-Channel • MessageR• Packet communication via PC*Some services may not be available depending on the network or operator.Setting Network Switching Methodi➜“SETTINGS”➜“Int’l roaming set”➜“3G/GSM setting”➜“AUTO”, “3G” or “GSM/GPRS”Setting the Search Mode of the Operator■Switching the operator automatically or manuallyi➜“SETTINGS”➜“Int’l roaming set”➜“NW search mode”➜ “Auto” or “Manual”When set to “Manual”, select an operator. ■Re-searching the connectable operatori➜“SETTINGS”➜“Int’l roaming set”➜“NW search mode”➜“Network re-search”When set to “Manual”, select an operator. Setting an operator to be preferably connectedi➜“SETTINGS”➜“Int’l roaming set”➜“NW search mode”➜ “PLMN setting”➜Highlight the operator to change the priority➜ u (FUNC)➜“Change priority”➜Highlight the destination➜d (Select)➜o (Finish)➜“YES”Setting operator name displayi➜“SETTINGS”➜“Int’l roaming set”➜“Display operator name” ➜“Display ON” or “Display OFF”■Display on the screenThe name of the currently connected operator appears on the task icon display area.After returning to JapanWhen you returned to Japan and turn on the FOMA terminal, the network will be automatically searched and set to the FOMA network (DOCOMO). “Setting the Search Mode of the Operator”→p.4Making a CallMaking a call to outside your destination country (including Japan)■Making a call to a country registered in “Int’l dial assistance”Dial the other party’s phone number➜u (FUNC)➜“Int’l call” ➜Select a country➜r or o (V. phone)■Making a call by dialing from the country codeOn the standby screen, dial + (0 (1 second or longer)) ➜ Country code➜Area code (Long distance code)➜The other party’s phone number➜r or o (V. phone)ＸＸＸＸＸConnecting operator’s name45312

Cutting lineMaking a local call abroadDial the other party’s phone number➜r or o (V.phone)Receiving a callWhen you receive a voice/videophone call, press rNetwork servicesBefore using the network services overseas, you have to set “Remote Control”.Roam. Guidance• Make the setting in Japan. i➜“SERVICE”➜“Roam. Guidance”➜“Activate” or “Deactivate”➜“YES”Bar incoming when roam• Depending on the operator overseas, the setting may be unavailable. i➜“SERVICE”➜“Bar incoming when roam”➜“Activate” or “Deactivate”When set to “Activate”, select the setting from “Bar All incoming” or “Data calls Barring”➜“YES”➜Enter your network security codeVoice Mail (Int.)i➜“SERVICE”➜“Service(Int.)”➜“Voice Mail(Int.)”➜Select the service➜“YES”➜Follow the audio guidanceCall Forwarding (Int.)i➜“SERVICE”➜“Service(Int.)”➜“Call Forwarding (Int.)”➜Select the service➜“YES”➜Follow the audio guidanceRoam. Guidance (Int.)i➜“SERVICE”➜“Service(Int.)”➜“Roam. Guidance (Int.)”➜“YES”➜Follow the audio guidanceRemote access (Int.)i➜“SERVICE”➜“Service(Int.)”➜“Remote access (Int.)”➜“YES”➜Follow the audio guidanceCaller ID req. (Int.)i➜“SERVICE”➜“Service(Int.)”➜“Caller ID req. (Int.)”➜“YES”➜Follow the audio guidanceCountry codes of major countriesEnter the following country codes when using international call or setting “Int’l dial assistance”. (As of May, 2008)* For other country codes and details, see the DOCOMO “International Services Website”. AreaCodeAreaCodeAreaCodeAustralia 61 Holland 31 Peru 51Austria 43 Hong Kong 852 Philippines 63Belgium 32 Hungary 36 Russia 7Brazil 55 India 91 Singapore 65Canada 1 Indonesia 62 Spain 34China 86 Italy 39 Sweden 46Czech 420 Japan 81 Switzerland 41Egypt 20 Korea 82 Taiwan 886Fiji 679 Macau 853 Thailand 66Finland 358 Malaysia 60 Turkey 90France33 Maldives 960 United Kingdom 44French Polynesia689New Caledonia687 United States of America1Germany 49New Zealand64Greece 30 Norway 47 Vietnam 84International call access code of main countries (Table 1)(As of March, 2008)* For the latest information, see the DOCOMO “International Services Website”. Area Code Area Code Area CodeAustralia 0011 Hungary 00 Portugal 00Belgium 00 India 00 Russia 810Brazil 0021/0014Indonesia 001 Singapore 001Ireland 00 Spain 00Canada 011 Italy 00 Sweden 00China 00 Korea 001 Switzerland 00Czech 00 Luxemburg 00 Taiwan 002Denmark 00 Macau 00 Thailand 001Finland 00 Malaysia 00 Turkey 00France 00 Monaco 00United Arab Emirates00Germany 00New Zealand00 United Kingdom 00Greece 00Norway00 United States of America011Holland 00Philippines00Hong Kong 001 Poland 00 Vietnam 00International Prefix number for the universal number (Table 2)(As of March, 2008)* Note that the universal numbers may not be available from mobile phones, public phones or hotels. * For the latest information, see the DOCOMO “International Services Website”. Area Code Area Code Area CodeArgentina 00 Holland 00 Portugal 00Australia 0011 Hong Kong 001 Singapore 001Austria 00 Hungary 00 South Africa 09Belgium 00 Ireland 00 Spain 00Brazil 0021 Israel 014 Sweden 00Bulgar 00 Italy 00 Switzerland 00Canada 011 Korea 001 Taiwan 00China 00 Luxemburg 00 Thailand 001Colombia 009 Malaysia 00 United Kingdom 00Denmark 00 New Zealand 00 United States of America011Finland 990 Norway 00France 00 Peru 00Germany 00 Philippines 00InquiriesFor inquiries overseas such as lost, stolen, charge accumulation or malfunction, refer to “For lost, stolen, charge accumulation, etc. overseas” on the front cover of the Quick Manual (For Overseas Use) or “For malfunctions overseas” in p.1. • When dialing to the inquiries numbers, “International call access code (Table 1)” or “International Prefix number for the universal number (Table 2)” assigned to your destination country is required. For details, refer to the “Mobile Phone User’s Guide [World Services]”. * Note that the universal numbers may not be available from mobile phones, public phones or hotels. 10 119786

Using your FOMA Terminal PolitelyWhen using your FOMA terminal, do not forget to consider the feelings of people around you.Turn off your FOMA terminal when you are:■In a place where it is prohibited to use a mobile phone.It is prohibited to use a mobile phone in some places. Turn off your FOMA terminal in: ・An airplane ・A hospital* There is not only a person in a ward who uses medical electrical equipment.Turn off your FOMA terminal even in a lobby or waiting room.■DrivingThe penalty shall be imposed on use of a handset held in your hand while driving.* If you are obliged to receive a call, tell the other to call back later in handsfree mode and stop the car at a secure location for dialing.■In a crowded place such as rush-hour train, where somebody nearby may be using an implantable cardiac pacemaker or implantable cardioverter-defibrillatorRadio waves may affect the operation of implantable cardiac pacemakers or implantable cardioverter-defibrillators. ■In a public place such as theater, cinema, or museumUsing the FOMA terminal in a public place, where you need to be quiet, annoys people around you.Mind where you use your FOMA terminal and the loudness of your voice or the ring tone■If you use your FOMA terminal in a quiet place such as restaurant or hotel lobby, mind the loudness of your voice is, etc. ■Take care not to disturb other people when you use your FOMA terminal in a public place. Respect privacyPlease be considerate of the privacy of individuals around you when taking and sending photos using camera-equipped mobile phones. These functions enable you to be well-manneredYour FOMA terminal is equipped with useful functions not to answer an incoming call or to mute the sounds of the FOMA terminal.This manual is bound in consideration of recycling. When this manual becomes unnecessary, we appreciate your cooperation of taking this manual out to the collection or recycling. Access DOCOMO e-site for procedures to change your address or billing plan and for request of information materials.iMenu ⇒ 料金＆お申込・設定 (Charges & Applications/Setting) ⇒ 各種手続き (ドコモeサイト) (Application procedure (DOCOMO e-site)) My docomo (http://www.mydocomo.com/) ⇒ 各種手続き (ドコモeサイト ) (Applicationprocedure (DOCOMO e-site))* You will need your “network ID” to access e-site from i-mode.* No packet communication charges are incurred when accessing e-site from i-mode. Accessing from overseas will incur charges.* You will need your “docomo ID/password” to access e-site from PC.* If you do not have or you have forgotten your “network ID” or “docomo ID/password”, contact the DOCOMO information Center listed on the back cover of this manual.* DOCOMO e-site may not be available depending upon the content of your subscription.* You may not be able to access e-site services due to system maintenance, etc.[Manner mode/Original manner mode]→p.86Manner mode mutes the sounds of the FOMA terminal such as the keypad sounds and the ring tone. You can customize Manner mode by changing the settings of the Record message function, vibrator or ring tone (Original manner mode). However, neither Manner mode nor Original manner mode can mute the shutter sound of the camera. [Public mode (Driving mode/Power OFF)] →pp.62, 63The FOMA terminal announces to the caller that you cannot answer the call because you are driving, or you are in the place you have to refrain from calling or you have to turn off the mobile phone. [Vibrator]→p.84The FOMA terminal vibrates to notify you of an incoming call. [Record message]→p.64When you cannot answer a call, the caller can leave a message. You can also use optional services such as the Voice Mail service (p.312) and Call Forwarding service (p.314). From i-modePacket communication charges freeFrom PC

FOMA® SO706iNAME:PHONE NUMBER:MAIL ADDRESS:ISSUE DATE:‘08.7INSTRUCTION MANUAL’08.7Manufacturer: Sony Ericsson Mobile Communications Japan, Inc.Sales: NTT DOCOMO, Inc.●Please confirm the phone number before you dial.●For application procedure, repairs and after-sales service, call inquiries above or contact your local DOCOMO shop on DOCOMO website or i-mode site. DOCOMO website: http://www.nttdocomo.co.jp/english/ i-mode site: iMenu ⇒ お知らせ (Information) ⇒ ドコモショップ (DOCOMO shop) (Japanese)INSTRUCTION MANUALFOMA® SO706i(In English)General Inquiries＜DOCOMO Information Center＞*Can be called from mobile phones and PHSs.(In Japanese only)*Can only be called from DOCOMO mobile phones.0120-005-250 (toll free) (No prefix) 151 (toll free)Repairs(In Japanese only) (No prefix) 113 (toll free)*Can only be called from DOCOMO mobile phones.(In Japanese only) 0120-800-000 (toll free)*Can be called from mobile phones and PHSs.DOCOMO mobile phone-81-3-5366-3114*(toll free)*Calling from the fixed phone will be charged according to the call rate for Japan.＊If you use SO706i, you should dial the number +81-3-5366-3114 (to dial “+”, press the “0” key for over a second).Fixed phone＜Universal number＞-800-0120-0151 ** You may be charged according to the call rate for the country where you are staying.＊ See p.334 for International call access code of main countries (Table 1) and International Prefix number for the universal number (Table 2) in this manual.Lost or theft of FOMA terminal, or payment of cumulative cost overseasIf your FOMA terminal has been damaged overseas, bring it to a repair counter designated by DOCOMO after ●If your FOMA terminal is lost or stolen overseas, take procedure to suspend the subscription immediately.●returning to Japan.International call access number of the country you stay (Table 1)Universal number international prefix (Table 2)<DOCOMO Information Center> (available 24 hours a day)Failures encountered overseasDOCOMO mobile phone-81-3-6718-1414*(toll free)*Calling from the fixed phone will be charged according to the call rate for Japan.＊If you use SO706i, you should dial the number +81-3-6718-1414 (to dial “+”, press the “0” key for over a second).Fixed phone＜Universal number＞ -800-5931-8600 ** You may be charged according to the call rate for the country where you are staying.＊ See p.334 for International call access code of main countries (Table 1) and International Prefix number for the universal number (Table 2) in this manual.International call access number of the country you stay (Table 1)Universal number international prefix (Table 2)<Network Technical Support and Operation Center> (available 24 hours a day)’08.7 (1st Edition)MDT-000091-EAA0Easy Search/Contents/PrecautionsBefore Using the HandsetVoice/Videophone CallsPhonebookSound/Screen/Light SettingsSecurity SettingsCamerai-mode/i-motion/i-ChannelMaili-αppliOsaifu-Keitai/ToruCaFull Browser1segData Display/Edit/ManagementMusic&Video Channel/Music PlaybackConvenient FunctionsCharacter EntryNetwork ServicesPC ConnectionOverseas UseAppendix/External Devices/TroubleshootingIndex/Quick ManualUtilizing recycled papersThis manual is printed usingan ink based on soy bean oil.To prevent damage to the environment, bring used battery packs to an NTT DOCOMO service counter, an NTT DOCOMO agent or a recycle center.Don’t forget your cellular phone ... or your manners!○When using your mobile phone in public, don’t forget to show common courtesy and consideration for others around you.KDIC 2484 SO706i (英文1版) H1H4

Navigation menu