Sony A3880112 GSM 850/900/1800/1900 GPRS / EDGE / UMTS FDD156 / HSUPA/HSDPA mobile phone with Bluetooth, WLAN 802.11bgn, GPS/A-GPS, FM Rx, ANT+ and RFID User Manual

Sony Mobile Communications Inc GSM 850/900/1800/1900 GPRS / EDGE / UMTS FDD156 / HSUPA/HSDPA mobile phone with Bluetooth, WLAN 802.11bgn, GPS/A-GPS, FM Rx, ANT+ and RFID

UserManual.wiki >

Sony >

A3880112 User Manual >

08 user manual part 1 HTML Version

08 user manual part 1

’XX.X

INSTRUCTION MANUAL

SO-02C Web_TA

SO-02C_E_TA.book 1 ページ２０１１年５月２４日　火曜日　午後２時３３分

SO-02C Web_TA

DOCOMO

W-CDMA, GSM/GPRS and Wireless LAN Systems

Thank you for your purchase of "SO-02C".

For proper use of the SO-02C, read this manual and each manual attached to other optional devices carefully

before and while you use the SO-02C. For more information on manuals, contact "General Inquiries" on the

last page of this manual.

SO-02C is the efficient partner of yours. Please handle the SO-02C with care and use it regularly for a long

time.

Before using the FOMA terminal

●Because a FOMA terminal operates using radio frequencies, it cannot be used inside a tunnel,

underground, in a building or other locations where radio waves do not reach the FOMA terminal, in

locations with weak radio wave condition, or outside of the FOMA's service area. The FOMA services may

not be available on high upper floors of high-rise apartments or buildings, even if you can see no

obstructions around you. On occasion, your calls may become disconnected even in areas with strong

radio wave condition, even if you are not moving, or even if there are 4-antenna marks in the FOMA

terminal's display.

●Please use discretion and mind your manners when using the FOMA terminal in public areas or crowded/

quiet places to keep from bothering others.

●Note that because the FOMA terminal operates on radio frequencies, your calls are at risk of being

intercepted by the third party. However, the W-CDMA, GSM/GPRS system automatically scrambles all calls

through a private call feature. Therefore, even if third party successfully intercepts your call, they will only

hear noise.

●The FOMA terminal operates on radio frequencies by converting voice into digital signals. If the caller

moves into an area of adverse radio wave condition, the digital signal may not restored accurately, and the

voice received in the call may differ slightly from the actual voice.

●This FOMA terminal has FOMA Plus-Area and FOMA HIGH-SPEED Area support.

●The FOMA terminal can be used only via the FOMA network provided by DOCOMO and DOCOMO's

roaming area.

●Always keep the information you save in the FOMA terminal in a separate note. Even if the data may be lost

as a result of malfunction, repair, change, or other handling of the FOMA terminal, under no condition will

DOCOMO be held liable for any lost data saved in the FOMA terminal.

●As with PCs, some user-installed applications may disrupt the stability of the FOMA terminal performance,

or unexpectedly transmit information via the Internet causing improper use of your location information as

well as personal information recorded on the terminal. Therefore, verify the supplier and operating

conditions of the applications to be used before using them.

SO-02C_E_TA.book 1 ページ２０１１年５月２４日　火曜日　午後２時３３分

SO-02C Web_TA

In addition to this manual, the operations of

SO-02C are described in "Quick Start Guide"

(in Japanese only) and "SO-02C eトリセツ

（取扱説明書） (SO-02C e Instruction manual)"

application of the FOMA terminal.

The initial operations and settings after

purchasing the FOMA terminal, screen view

contents and operations of main function are

explained. (In Japanese only)

Similarly to this manual, operations and

settings of each function are explained.

To use "SO-02C eトリセツ（取扱説明書）

(SO-02C e Instruction manual)" application,

from the Home screen, tap X [Instruction

Manual]. For the first time using, download

and install it according to the onscreen

instructions. You can use the application as

an electronic book. You can also shift to

actual operations by tapping the description

in the contents or view reference contents.

❖Cautions

･For downloading or updating the application, a

high packet communication charge will be applied

because of a large amount data communication.

For this reason, subscription of packet flat-rate

service is highly recommended.

* If you use Wi-Fi function to download, packet

communication charges are not applied.

Operations and settings of each function are

explained.

It can be downloaded from NTT DOCOMO

website.

http://www.nttdocomo.co.jp/support/trouble/

manual/download/index.html

* The URL and contents are subject to

change without prior notice.

❖Cautions

･Reproduction or reprint of all or part of this manual

without prior permission is prohibited.

･Important information for SO-02C is posted in the

following website. Be sure to check before using.

http://www.sonyericsson.co.jp/support/

use_support/product/so-02c/

About manuals of SO-02C

"Quick Start Guide"

(Supplied accessories)

"Instruction Manual"

(Application of the FOMA

terminal)

"Instruction Manual" (PDF file)

SO-02C_E_TA.book 1 ページ２０１１年５月２４日　火曜日　午後２時３３分

SO-02C Web_TA

In this manual, each key operations are

described with p, x, y, t,

m, k. And selection operations of

the icons or function items on the touch panel

are described as follows.

❖Information

･In this manual, the instructions are described with

the default Home screen. If you set the other

application to the home screen, the operations

may differ from the descriptions.

･Display examples and illustrations used in this

manual are just images for explanations and may

be different from actual ones.

･In this manual, the easier procedure is described

for the functions and settings which have multiple

operating procedures.

･Please note that "SO-02C" is called the "FOMA

terminal" in this "Instruction Manual".

Operation descriptions

Description Operation

From the Home

screen, press

t and tap

[Settings].

From the Home screen, press

t (Menu) key and tap

"Settings" on the screen.

Tap [Settings] X

[Date & time] X

[Set date].

Tap "Settings" displayed on the

screen, and then tap "Date &

time" on the next screen and

"Set date" on the following

screen in order.

Tap or to

adjust the date.

Tap or displayed on the

screen and adjust the date.

Touch and hold

the title bar of the

folder.

Keep touching the title bar of

the folder longer (1-2 seconds).

SO-02C_E_TA.book 2 ページ２０１１年５月２４日　火曜日　午後２時３３分

SO-02C Web_TA

･SO-02C (with warranty and Back Cover

SO14)

･Quick Start Guide (In Japanese only)

･Notes on usage

Safety/Handling precautions

･Battery Pack SO05

･AC Adapter Cable SO02 (with warranty)

･microSDHC card (16GB)* (Sample)

* Inserted in the FOMA terminal when purchased.

･Stereo Headset with Microphone (Sample)

Accessories and main

options

Supplied accessories

クイック

スタート

ガイド

SO-02C_E_TA.book 3 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

About manuals of SO-02C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Accessories and main options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Handling precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Contents

Before Using the Handset

→P. 2 3

･Part names and functions ......................................................23

･UIM.........................................................................................24

･microSD card .........................................................................25

･Charging ................................................................................26

･Turning power on and off .......................................................30

･Initial settings (Setup guide) ..................................................31

･Status bar ...............................................................................32

･Notification panel ...................................................................34

･Notification LED......................................................................34

･Basic operations ....................................................................35

･Home screen..........................................................................38

･Searching information in the FOMA terminal and web pages

...............................................................................................42

･Applications screen ...............................................................43

･Character entry ......................................................................46

･Settings of entering characters ..............................................53

･Settings of Japanese keyboard .............................................53

Calling/Network Services

→P. 5 7

･Making/Receiving calls ..........................................................57

･Call log ...................................................................................60

･Contacts ................................................................................. 61

･Network Services ...................................................................71

SO-02C_E_TA.book 4 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

Settings

→P. 7 9

･Viewing the setting menu .......................................................79

･Wireless & networks ...............................................................79

･Call settings............................................................................86

･Sound ..................................................................................... 87

･Display ................................................................................... 89

･Location & security.................................................................90

･Applications ...........................................................................95

･Accounts & sync ....................................................................97

･Privacy..................................................................................100

･Storage.................................................................................101

･Language & keyboard .........................................................102

･Voice input & output .............................................................102

･Accessibility .........................................................................103

･Date & time...........................................................................103

･About phone.........................................................................104

Mail/Internet

→P.105

･Email.....................................................................................105

･sp-mode mail .......................................................................110

･Using Gmail..........................................................................111

･Google Talk (Chat) ...............................................................111

･Message (SMS)....................................................................112

･Using Browser......................................................................114

Multimedia

→P.120

･Using the camera.................................................................120

･Playing multimedia content ..................................................133

･Viewing photos/videos with Gallery .....................................134

･Playing video with YouTube..................................................138

･Connecting the FOMA terminal to TV to watch photos and

videos...................................................................................139

･Music player.........................................................................140

･TrackID .................................................................................143

File management

→P.144

･Handling a file ......................................................................144

･Transferring and moving data ..............................................144

･Using Bluetooth function ......................................................149

･Sharing files with DLNA devices via Media server ..............153

SO-02C_E_TA.book 5 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

Applications

→P.154

･Using Android Market ..........................................................154

･Using DOCOMO Market ......................................................154

･TimescapeTM ........................................................................155

･About location services........................................................159

･FM radio ...............................................................................165

･Calendar...............................................................................166

･Clock/Alarm..........................................................................168

･Evernote ...............................................................................170

･OfficeSuite............................................................................170

･Other applications................................................................170

Overseas use

→P.173

･Overview of International roaming (WORLD WING) ............173

･Available Services................................................................173

･Before using .........................................................................174

･Making/Receiving calls in the country you stay ...................178

Appendix/Index

→P.180

･Optional and related devices...............................................180

･Troubleshooting....................................................................180

･Warranty and After Sales Services.......................................185

･Updating software................................................................188

･Main specifications ..............................................................190

･Specific Absorption Rate of Mobile Phone, etc. ..................193

･End User Licence Agreement..............................................206

･About Open Source Software...............................................207

･Export Controls and Regulations .........................................208

･Intellectual Property Right ....................................................208

･Index .................................................................................... 211

SO-02C_E_TA.book 6 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

Notes on usage

･The FOMA terminal does not support

i-mode sites (programs) or i-αppli.

･The FOMA terminal automatically performs

communication for synchronizing data,

checking the latest software version,

maintain connection with the server, etc. If

you transmit a large amount of data such

as downloading applications or watching

movie, a packet communication charge

becomes high. Subscription of packet flat-

rate service is highly recommended.

･This FOMA terminal cannot be used as a

modem.

･Public mode (Driving mode) is not

supported.

･Setting the phone to silent mode does not

mute sounds (playback of video or music,

alarm, etc.) other than the ring tone,

operation sound, and notification sounds.

･The names of the operators are displayed

when the screen is locked.

･Your phone number (own number) can be

checked as follows:

From the Home screen, press t and

tap [Settings] X [About phone] X [Status].

･The software version of your FOMA

terminal can be checked as follows:

From the Home screen, press t and

tap [Settings] X [About phone].

･You can perform software update by

downloading an update file with a PC via

Internet and connecting the PC to the

FOMA terminal. For details, see

"Connecting to a PC and updating" (P.189).

･By some software updates, the operating

system (OS) may be version-upgraded for

improving the FOMA terminal quality. For

this reason, you always need to use the

latest OS version. And some applications

that used in the previous OS version may

not be available or some unintended bugs

may occur.

･When using the FOMA terminal inserting

some UIM other than UIM (FOMA card)

(white), voice calls and packet

communication may not be available in

some overseas networks. For using

overseas, please visit a docomo Shop near

you. DOCOMO exchanges UIM (FOMA

card) (green) for UIM (FOMA card) (white)

free of charge.

･Set the screen lock to ensure the security

of your FOMA terminal for its loss. For

details, see "Screen lock" (P.93).

Continued on next page

SO-02C_E_TA.book 7 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

･If your FOMA terminal is lost, change your

each account password to invalidate

authentication using a PC to prevent other

persons from using Google services such

as Google Talk, Gmail, Android Market,

etc., Facebook, Twitter and mixi.

･The FOMA terminal supports only

sp-mode, mopera U and Business mopera

Internet. Other providers are not

supported.

SO-02C_E_TA.book 8 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

■For safe and proper use of the FOMA terminal,

please read the "Safety Precautions" prior to

use. Keep the Manual in a safe place for future

reference.

■ALWAYS observe the safety precautions since

they intend to prevent personal injury or

property damage.

■The following symbols indicate the different

levels of injury or damage that may result if the

guidelines are not observed and the FOMA

terminal is used improperly.

■The following symbols indicate specific

directions.

■"Safety Precautions" are described in the

following categories:

1. Handling the FOMA terminal, Battery Pack, AC

Adapter cable, and UIM (general)................. 10

2. Handling the FOMA terminal ........................ 11

3. Handling the Battery Pack ............................ 13

4. Handling the AC Adapter cable..................... 14

5. Handling the UIM.......................................... 15

6. Handling the FOMA terminal near electronic

medical equipment........................................ 16

7. Material list ................................................... 17

Safety Precautions (Always

follow these directions)

Failure to observe

these guidelines may

immediately result in

death or serious injury.

Failure to observe

these guidelines may

result in death or

serious injury.

Failure to observe

these guidelines may

result in injury and

property damage.

DANGER

WARNING

CAUTION

Indicates prohibited actions.

Indicates not to disassemble.

Indicates not to handle with wet hands.

Indicates not to use where it could get

wet.

Indicates compulsory actions in

accordance with instructions.

Indicates to remove the power plug from

the outlet.

Don’t

No disassembly

No wet hands

No liquids

Unplug

SO-02C_E_TA.book 9 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

1. Handling the FOMA terminal,

Battery Pack, AC Adapter cable,

and UIM (general)

DANGER

Do not use, store, or leave the FOMA

terminal, battery pack, AC adapter cable, or

UIM in a place subject to high temperature

such as close to fire, under direct sunlight, or

in a car on an extremely hot day.

Doing so may cause fire, burns or injury.

Do not place the FOMA terminal, battery

pack, AC adapter cable, or UIM inside

cooking appliance such as a microwave oven

or high-pressure containers.

Doing so may cause fire, burns, injury or

electric shock.

Do not disassemble or modify the FOMA

terminal, battery pack, AC adapter cable, or

UIM.

Doing so may cause fire, burns, injury or

electric shock.

Do not let the FOMA terminal, battery pack,

AC adapter cable, or UIM get wet with water,

drinking water, urine of pet animals, etc.

Doing so may cause fire, burns, injury or

electric shock.

Use the battery pack and AC adapter cable

for the FOMA terminal specified by

DOCOMO.

Failure to do so may cause fire, burns, injury

or electric shock.

WARNING

Do not subject the FOMA terminal, battery

pack, AC adapter cable, or UIM to excessive

force or throw it.

Doing so may cause fire, burns, injury or

electric shock.

Do not allow the microUSB connection jack,

headset connection jack or HDMI connection

jack to come in contact with conducting

foreign substances (a piece of metal, pencil

lead, etc.). Never allow these objects to get

into the connection jack.

Doing so may cause fire, burns, injury or

electric shock.

Do not cover or wrap the FOMA terminal,

battery pack, AC adapter cable, or UIM with

a cloth or bedding in use or while charging.

Doing so may cause fire or burns.

Power off the FOMA terminal before you step

into a place where flammable gas can leak,

such as gas stations. Do not charge the

battery.

Gas may catch fire.

If you notice anything unusual about the

FOMA terminal, battery pack, AC adapter

cable, or UIM such as an unusual odor,

overheating, discoloration or deformation

during operation, charging or storage,

immediately perform the following measures.

・Remove the power plug from the power

outlet.

・Power off the FOMA terminal.

・Remove the battery pack from the FOMA

terminal.

Failure to do so may cause fire, burns, injury

or electric shock.

Don’t

No disassembly

No liquids

Don’t

SO-02C_E_TA.book 10 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

CAUTION

Do not place on an unstable or inclined

platform.

Doing so may cause the device to fall and

cause injury.

Do not keep in a place that is very humid,

dusty, or subject to high temperature.

Doing so may cause fire, burns or electric

shock.

If children use the FOMA terminal, parents or

guardians should give them the proper

instructions for use. Make sure that they use

the FOMA terminal as instructed.

Failure to do so may cause injury.

Keep the FOMA terminal, battery pack, AC

adapter cable, or UIM out of the reach of

babies and infants.

Failure to do so may cause accidental

swallowing or injury.

Be careful especially when you use the

FOMA terminal while it has been

continuously connected to the AC adapter

cable for a long period of time.

If you play a game etc. while charging for a

long time, the temperature of the FOMA

terminal, battery pack and AC adapter cable

may rise.

If you are directly in contact with hot parts

for a long period of time, it may cause your

skin to become red, itch, or develop a rash

depending on your physical condition and

also it may cause low-temperature burn.

2. Handling the FOMA terminal

WARNING

Do not light up the flash/photo light in front of

person's eyes since strong light is emitted

from the FOMA terminal.

Also, do not look straight the light-emitting

part when the flash/photo light lights up.

Failure to do so may cause reduce visual

acuity. Especially to shoot infants or young

children, step away from them more than

1m.

Do not allow a foreign substance such as

water and other liquids, metal parts, or

flammables to get in the UIM or microSD

card insertion slot on the FOMA terminal.

Doing so may cause fire, burns, injury or

electric shock.

Do not turn on the light toward a driver of a

car etc.

Doing so may disturb driving and cause an

accident.

Don’t

SO-02C_E_TA.book 11 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

WARNING

Power off the FOMA terminal in a place

where the use is prohibited such as in

airplane or hospital.

Failure to do so may affect electronic

equipment and electronic medical

equipment. If you set the automatic power-

on function, cancel it before powering off the

FOMA terminal.

Follow the instructions of each medical

facility for the use of mobile phones on their

premises.

Prohibited acts such as mobile phone usage

on board an airplane may be punished by

law.

If the microUSB cable is connected into the

microUSB connection jack for charging etc.,

the FOMA terminal is automatically powered

on. Be careful not to connect the microUSB

cable in a place where the use is prohibited

such as in airplane or hospital.

Always keep the FOMA terminal away from

your ear when you talk setting the hands-free

function.

Also, when you play game or play back

music connecting the Earphone/Microphone,

etc. to the FOMA terminal, adjust the volume

adequately.

If the volume is too loud, it may cause

difficulty in hearing. Moreover, if you barely

hear the surrounding sounds, it may cause

an accident.

If you have a weak heart, set the vibrator or

ringtone volume carefully.

Failure to do so may affect your heart.

WARNING

If you are wearing any electronic medical

equipment, check with the relevant medical

electronic equipment manufacturer or vendor

whether the operation may be affected by

radio waves.

The radio waves from the FOMA terminal

may affect electronic medical equipment.

Power off the FOMA terminal near electronic

devices or equipment operating on high

precision control or weak signals.

Failure to do so may interfere with the

operation of electronic devices or

equipment.

* The followings are some electronic devices

or equipment that you should be careful of:

Hearing aids, implantable cardiac

pacemaker, implantable cardioverter

defibrillator, other electronic medical

equipment, fire detector, automatic door,

and other automatically controlled devices

or equipment.

If you use an implantable cardiac

pacemaker, implantable cardioverter

defibrillator, or other electronic medical

equipment, check with the relevant

medical electronic equipment

manufacturer or vendor whether the

operation can be affected by radio waves.

Be careful about broken glasses or exposed

internal from the FOMA terminal if the

display or the camera lens is broken.

Shatterproof film-applied hardened glass is

used on the display surface and the acrylic

resin is applied on camera lens so as not to

be shattered when broken. But they may

cause injury if you touch a cut surface or

exposed portion mistakenly.

SO-02C_E_TA.book 12 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

CAUTION

Do not swing the FOMA terminal around by

holding the strap.

The FOMA terminal may hit you or others

and cause accident such as injury.

Do not use damaged FOMA terminal.

Doing so may cause fire, burns, injury or

electric shock.

If the display is mistakenly damaged and

when the liquid crystal runs out, do not get it

on your skin such as face, hands, etc.

Doing so may cause blindness or injury on

your skin.

If the liquid crystal gets in your eye or

mouth, rinse with clean running water, and

get medical treatment immediately.

Also, if it gets on your skin or clothes, use

something such as alcohol to wipe off and

wash it with soap in clear water.

To use the FOMA terminal in car, check with

automobile manufacturer or dealer to

determine how the device is affected by radio

waves before using.

In rare cases, using the phone in some

vehicle models can cause the vehicle's

electronic equipment to malfunction. In that

case, stop using the FOMA terminal

immediately.

The use of the FOMA terminal may cause

itching, rashes, eczema, or other symptoms

depending on the user's physical condition.

Immediately stop using and get medical

treatment in such a case.

For material of each part, see "7. Material

list" (P.17).

CAUTION

When watching the display, take a certain

distance from the display in a fully bright

place.

Failure to do so may reduce visual acuity.

3. Handling the Battery Pack

■Check the type of the battery by the label on

the battery pack.

DANGER

Do not touch the battery pack terminal with a

metal object such as a wire. Also, do not

carry or keep the battery pack together with

metal objects such as a necklace.

Doing so may cause battery pack to ignite,

explode, overheat or leak.

Check the orientation of battery pack to

install it to the FOMA terminal, and do not

forcibly attach the battery pack to FOMA

terminal if you are having trouble installing it.

Doing so may cause battery pack to ignite,

explode, overheat or leak.

Do not throw the battery pack into fire.

Doing so may cause battery pack to ignite,

explode, overheat or leak.

Do not stick a nail into the battery pack, hit it

with a hammer, or step on it.

Doing so may cause battery pack to ignite,

explode, overheat or leak.

Don’t

Display Type of Battery

Li-ion 00 Lithium Ion Battery

Don’t

SO-02C_E_TA.book 13 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

DANGER

If the battery fluid gets into your eyes, do not

rub, rinse with clean running water, and get

medical treatment immediately.

Failure to do so may cause blindness.

WARNING

If the battery pack seems to have

abnormalities such as deformation or

scratches due to falling, never use it.

Doing so may cause battery pack to ignite,

explode, overheat or leak.

If the battery pack leaks or hears an unusual

odor, immediately stop using and move it

away from fire.

The leaking liquid may ignite fire, catch fire,

or explode.

Be careful about your pet not to bite the

battery pack.

Failure to do so may cause battery pack to

ignite, explode, overheat or leak.

CAUTION

Do not discard the battery pack together with

other garbage.

The battery pack may become the source of

fire or environmental destruction. Take the

used battery pack to our service counter

(docomo Shop, etc.) after insulating it by

affixing an adhesive tape on the terminal of it

or follow the instructions of the local

authorities in charge of collecting used

battery packs.

CAUTION

Do not use or charge the wet battery pack.

Doing so may cause battery pack to ignite,

explode, overheat or leak.

If fluid etc. leaks out from battery pack, do

not make the fluid contact with your skin of

face or hands.

Doing so may cause blindness or injury on

your skin.

If the fluid etc. put into your eyes or mouth,

or contacts skin or clothes, immediately

flush the contacted area with clean running

water.

If the fluid put into the eyes or mouth,

immediately see a doctor after flushing.

4. Handling the AC Adapter cable

WARNING

Do not use the microUSB cable if it is

damaged.

Doing so may cause fire, burns or electric

shock.

Do not use the AC adapter cable in a very

humid or steamy place such as bathroom.

Doing so may cause fire, burns or electric

shock.

Do not touch the AC adapter cable if you

hear thunder.

Doing so may cause electric shock.

Don’t

SO-02C_E_TA.book 14 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

WARNING

Do not short-circuit the microUSB plug while

it is connected to the power outlet. Do not

touch the microUSB plug with your hands,

fingers, or any part of your body.

Doing so may cause fire, burns or electric

shock.

Do not place any heavy objects on the

microUSB cable.

Doing so may cause fire, burns or electric

shock.

When you insert and remove AC adapter

from power outlet, do not contact a metal

strap or other metal objects with the jack.

Doing so may cause fire, burns or electric

shock.

Do not touch the cord of the AC adapter

cable or the power outlet with wet hands.

Doing so may cause fire, burns or electric

shock.

Use the adapter only on the specified power

supply and voltage.

Use the AC adapter cable available overseas

when you charge the battery overseas.

Failure to do so may cause fire, burns or

electric shock.

AC adapter cable: AC 100 V to 240 V (Make

sure to connect the adapter to a household

AC power outlet.)

Clean dust from the power plug.

Failure to do so may cause fire, burns or

electric shock.

WARNING

When you connect the AC adapter to the

power outlet, insert it firmly.

Failure to do so may cause fire, burns or

electric shock.

Hold the power plug, not the microUSB

cable, when you remove the AC adapter from

the power outlet.

Failure to do so may cause fire, burns or

electric shock.

Remove the power plug from the power

outlet when not used for a long period of

time.

Failure to do so may cause fire, burns or

electric shock.

If liquid such as water gets into the adapter,

immediately remove it from the power outlet.

Failure to do so may cause fire, burns or

electric shock.

Before cleaning, remove the power plug from

the power outlet.

Failure to do so may cause fire, burns or

electric shock.

5. Handling the UIM

CAUTION

Please be careful not to touch a cut surface

when you remove the UIM.

Failure to do so may cause injury.

Don’t

No wet hands

Unplug

SO-02C_E_TA.book 15 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

6. Handling the FOMA terminal

near electronic medical

equipment

■The following instructions observe the

guidelines of the Electromagnetic

Compatibility Conference, Japan to protect

electronic medical equipment from radio

waves from mobile phones.

WARNING

Please observe the following guidelines in

medical facilities.

・Do not take the FOMA terminal into the

operating rooms, ICU (Intensive Care

Unit), or CCU (Coronary Care Unit).

・Power off the FOMA terminal inside

hospital wards.

・Power off the FOMA terminal in the lobby

and other places if there are any electronic

medical equipment operating in the

vicinity.

・Follow the instructions of each medical

facility when they specify areas forbidding

to use and carrying a mobile phone.

・If you set the automatic power-on function,

cancel it before powering off the FOMA

terminal.

Power off the FOMA terminal in crowded

places such as rush-hour trains. There may

be a person with an implantable cardiac

pacemaker or implantable cardioverter

defibrillator near you.

The radio waves from the FOMA terminal

may affect the operation of implantable

cardiac pacemaker or implantable

cardioverter defibrillator.

WARNING

If you use an implantable cardiac pacemaker

or implantable cardioverter defibrillator, keep

the FOMA terminal more than 22 cm away

from the implant at all times.

The radio waves from the FOMA terminal

may affect the operation of implantable

cardiac pacemaker or implantable

cardioverter defibrillator.

If you need to use electronic medical

equipment other than implantable cardiac

pacemaker or implantable cardioverter

defibrillator outside medical facilities such as

treating at home, check with the relevant

medical electronic equipment manufacturer

whether the operation may be affected by

radio waves.

The radio waves from the FOMA terminal

may affect the performance of electronic

medical equipment.

SO-02C_E_TA.book 16 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

7. Material list

■ Common precautions

･Do not expose to water.

The FOMA terminal, battery pack, AC Adapter

cable, and UIM are not waterproof. Do not use

them in a humid place such as bathroom or in

the rain. If you carry the FOMA terminal on your

body, perspiration may corrode the internal

parts of the FOMA terminal and cause

malfunction. Note that if a trouble is diagnosed

as exposure to water or other liquid, repairs of

the FOMA terminal may not be covered by the

Warranty or it may not be possible to repair

such phones. In that case, even if the FOMA

terminal can be repaired, it is repaired at the

owner's expense.

･Clean the FOMA terminal with a dry soft

cloth (such as used for cleaning

eyeglasses).

- Do not rub it roughly with a dry cloth. The

display may be damaged.

- Drops of water or dirt left on the display may

cause stains.

- Do not use alcohol, thinner, benzene,

cleaning detergent, etc. to clean the FOMA

terminal. These chemicals may erase the

printing on the FOMA terminal or cause

discoloration.

Part Material Surface

treatment

Exterior case

(Front)

PC resin

(with glass)

UV coating

Proximity sensor PC resin None

Light sensor PC resin None

Notification LED PC resin None

Exterior case

(Back, HDMI

connector

cover)

PC resin

(with glass)

Non-conductive

vacuum

metallization

(tin)+UV coating

Hardware key

(Back key, Home

key, Menu key,

Camera key,

Volume key,

Power key)

PC resin Non-conductive

vacuum

metallization

(tin)+UV coating

Transparent

plate (Display)

Hardened

glass

Shatterproof film

(PET)

Transparent

plate

(Camera lens)

PMMA Hard coating

Flash/Photo light PC resin None

Back cover PC resin Non-conductive

vacuum

metallization

(tin)+UV coating

Handling precautions

Continued on next page

SO-02C_E_TA.book 17 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

･Clean the terminals occasionally with a

dry cotton swab.

If the jack is soiled, connection gets worse and

it may cause power to be turned off or

insufficient battery charge, so clean the jack

with a dry cotton swab etc. When cleaning, be

careful not to damage the terminals.

･Do not leave the FOMA terminal near the

air conditioning vent.

Extreme temperature changes may produce

condensation and corrode the internal parts of

the FOMA terminal, causing it to malfunction.

･Make sure to use the FOMA terminal or

battery pack without excessive force.

If you put the FOMA terminal in a bag full of

items or sit down with the FOMA terminal in the

pocket of your cloth, it may damage the

display, and internal circuit board, and the

battery pack and cause the FOMA terminal to

malfunction.

Also, while the external device is connected to

the microUSB connection jack, headset

connection jack or HDMI connection jack, it

may damage the connector and cause

malfunction.

･Do not rub or scratch the display with

metal.

The display may get scratched and it may

cause malfunction or damage.

･Make sure to see the user's manuals

supplied with the battery pack and AC

adapter cable.

■ FOMA terminal precautions

･Do not press touch panel surface

forcibly, or not operate with a sharp-

pointed objects such as nail, ballpoint

pen, pin, etc.

Doing so may cause damage of touch panel.

･Do not use the FOMA terminal in

extremely hot or cold places.

Use the FOMA terminal within a temperature

range of 5°C to 35°C and a humidity range of

45% to 85%.

･Using the FOMA terminal near ordinary

phone, television or radio may cause

interference in these electric

appliances. Make sure to move far away

from them when using the FOMA

terminal.

･Note down the information saved in the

FOMA terminal in a separate note and

keep it safely.

Under no condition will DOCOMO be held

liable for any damaged or lost data saved in the

FOMA terminal.

･Do not drop or give a strong impact to

the FOMA terminal.

Doing so may cause malfunction or damage.

･Do not plug the connector of the external

device into the microUSB connection

jack, headset connection jack or HDMI

connection jack at the slant or pull it

while connecting.

Doing so may cause malfunction or damage.

Continued on next page

SO-02C_E_TA.book 18 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

･The FOMA terminal could become warm

while in use and charging. This

condition is not abnormal. You can

continue charging the battery.

･Do not leave the camera under direct

sunlight.

If you do so, some of the elements may melt or

become faded.

･Use the FOMA terminal with the HDMI

connection jack cover closed.

Failure to do so may get dust or water inside

and cause malfunction.

･Do not use the FOMA terminal without

the back cover.

Doing so may cause the battery pack fall,

malfunction, and damage.

･Do not remove the microSD card or

power off the FOMA terminal while using

the microSD card.

Doing so may cause data loss or malfunction.

･Do not let magnetic cards, etc. come

close to the FOMA terminal.

The magnetic data in cash cards, credit cards,

telephone cards, floppy disks, etc. may be

erased.

･Do not bring strong magnetic objects

close to the FOMA terminal.

Strong magnetic objects may cause

misoperation.

■ Battery pack precautions

･The battery pack is a consumable

accessory.

Even if the operating time of the FOMA terminal

varies depending on the operating conditions

and other factors, when the length of time you

can use the FOMA terminal with a fully charged

battery becomes unusually short, it is time to

replace the battery pack. Purchase the battery

pack specified in this manual.

･Charge the battery pack in an

environment with the proper ambient

temperature (5°C to 35°C).

･The operating time of the battery pack

varies depending on the operating

environment and the secular

degradation level of the battery pack.

･Depending on the use condition, the

battery pack may be inflated as it comes

to the end of its life. This is not a

malfunction.

･Do not store the battery pack in the

following cases:

- The battery is fully charged (immediately

after the charging is complete)

- The battery has run out (the phone cannot

power on)

The performance and life of the battery pack

may deteriorate.

It is recommended that you store the battery

pack with the remaining battery level of about

40 percent as a guide.

SO-02C_E_TA.book 19 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

■ AC adapter cable precautions

･Charge the battery pack in an

environment with the proper ambient

temperature (5°C to 35°C).

･Do not charge in the following places.

- Places that are very humid, dusty or exposed

to strong vibrations.

- Near ordinary phone or TV/radio.

･The AC adapter cable could become

warm while charging. This condition is

not abnormal. You can continue using

the FOMA terminal.

･When you use the power outlet with a

mechanism to prevent the plug from

being removed, follow the instructions

on the outlet's user's manual.

･Do not give a strong impact to the

adapter. Also, do not bend or deform the

microUSB plug.

Doing so may cause malfunction.

■ UIM precautions

･Do not use unnecessary force to insert/

remove the UIM.

･Do not insert and use the UIM with

another IC card reader/writer. Please

note that you are wholly liable for any

damage or malfunction as a result of

such action.

･Always keep the IC portion clean when

you use the card.

･Clean the FOMA terminal with a dry soft

cloth (such as used for cleaning

eyeglasses).

･Note down the information saved in the

UIM in a separate note and keep it

safely.

Under no condition will DOCOMO be held

liable for any damaged or lost data saved in the

FOMA terminal.

･Take an expended UIM to sales outlet

such as docomo Shop for proper

disposal in order to protect the

environment.

･Do not carelessly damage, contact, or

short-circuit an IC.

Doing so may cause data loss or malfunction.

･Do not drop a UIM or subject it to

impact.

Doing so may cause malfunction.

･Do not bend a UIM or place a heavy

object on it.

Doing so may cause malfunction.

･Do not insert the UIM on which any label

or seal is stuck into the FOMA terminal.

Doing so may cause malfunction.

SO-02C_E_TA.book 20 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

■ Bluetooth function precautions

･To secure the Bluetooth communication

security, the FOMA terminal supports

the security function compliant with

Bluetooth standards, but the security

may not be sufficient depending on the

setting.

Concern about the communication

using the Bluetooth function.

･Please be aware that DOCOMO is not

responsible for data leak when making

data communications using Bluetooth.

･You can use a headset, handsfree, and

audio profiles on the FOMA terminal.

The audio/video remote control may be

available for audio profile.

･Frequency band

The frequency band used by the FOMA

terminal's Bluetooth/wireless LAN function is

indicated on the battery storage section. The

following are the descriptions:

2.4: This radio equipment uses the 2400 MHz

band.

FH/DS/OF: Modulation scheme is the FH-SS,

DS-SS, or OFDM system.

1: The estimated interference distance is 10 m

or less.

4: The estimated interference distance is 40 m

or less.

: The full band between 2400 MHz

and 2483.5 MHz is used and the

band of the mobile identification

device can be avoided.

Available channels vary depending on the

country.

For use in an aircraft, contact the airline

beforehand.

･Bluetooth cautions

The operating frequency band of this

equipment is used by industrial, scientific,

consumer and medical equipment including

microwave ovens, premises radio stations for

identifying mobile units used in the

manufacturing lines of plants (radio stations

requiring a license), specified low power radio

stations (radio stations requiring no license)

and amateur radio stations (hereinafter referred

to as "another station").

1. Before using this equipment, confirm that

"another station" is not being operated

nearby.

2. In the event of this equipment causing

harmful radio wave interference with

"another station", promptly change the

operating frequency or stop radio wave

emission by turning off the power, etc.

3. If you have further questions, contact

"General Inquiries" on the last page of this

manual.

2.4FH1/DS4/OF4

SO-02C_E_TA.book 21 ページ２０１１年５月２４日　火曜日　午後２時３３分

Contents/Precautions

SO-02C Web_TA

■ Wireless LAN (WLAN) precautions

･Wireless LAN

Do not use wireless LAN near magnetic

devices such as electrical appliances or AV/OA

devices, or in radio waves.

- Magnetism or radio waves may increase

noises or disable communications

(especially when using a microwave oven).

- When used near TV, radio, etc., reception

interference may occur, or channels on the

TV screen may be disturbed.

- If there are multiple wireless LAN access

points nearby and the same channel is used,

search may not work correctly.

･2.4 GHz device cautions

The operating frequency band of the WLAN

device is used by industrial, scientific,

consumer and medical equipment including

home electric appliances such as microwave

ovens, premises radio stations for identifying

mobile units used in the manufacturing lines of

plants (radio stations requiring a license),

specified low power radio stations (radio

stations requiring no license) and amateur

radio stations (radio stations requiring a

license).

1. Before using the device, confirm that

premises radio stations for identifying

mobile units, specified low power radio

stations and amateur radio stations are not

being operated nearby.

2. If the device causes harmful radio

interference to premises radio stations for

identifying mobile units, immediately change

the frequency band or stop use, and contact

"General Inquiries" on the last page of this

manual for crosstalk avoidance, etc. (e.g.

partition setup).

3. If the device causes radio interference to

specified low power radio stations or

amateur radio stations, contact "General

Inquiries" on the last page of this manual.

■ Cautions

･Do not use altered FOMA terminal.

Using an altered device is a violation of

the Radio Law.

A "Technical Conformity Mark " affixed on

the manufacturer's specification sticker

certifies that the FOMA terminal meets

technical regulations for specified radio

equipment that are based on the Radio Law.

If you remove the screws and alter the inside of

the FOMA terminal, the technical regulations

conformity certification becomes invalid.

Do not use the FOMA terminal with the

certification invalid, as it is a violation of the

Radio Law.

･Be careful when using the FOMA

terminal while driving.

Using a handheld mobile phone while driving

will result in a penalty.

However, absolutely necessary cases such as

rescue of a sick person or maintaining public's

safety are exempted.

SO-02C_E_TA.book 22 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

aLight sensor: Used for auto controlling of the

screen brightness.

bProximity sensor: Turns on or off the touch screen

to prevent misoperation during a call.

cEar speaker

dTouch screen

eBack key

fHome key

gMenu key

hPower key/Screen lock key

iHDMI connector (type D)

jFlash/Photo light

kCamera lens

lGPS antenna section*

mHeadset connector

nSecond microphone: Reduces noise to make

easy to listen.

oMicrophone

pSpeaker

qStrap hole

rFOMA antenna section*

sNotification LED

tConnector for microUSB cable

uVolume key/Zoom key

vCamera key

* The antenna is built into the main body. Covering

around the antenna with your hand may affect the

quality.

❖Note

･Do not put stickers etc. on each sensors.

Part names and functions

Before Using the Handset

efg

jkl

h i

SO-02C_E_TA.book 23 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

The UIM is an IC card recorded user

information such as your phone number etc.

When the UIM is not inserted to the FOMA

terminal, you cannot use some functions

(phone function, etc.) of the FOMA terminal.

･In this FOMA terminal, the UIM (blue) is not

available. If you have the UIM (blue), bring it

to the nearest docomo Shop to replace.

･When inserting/removing the UIM, make

sure to power off the FOMA terminal. Do not

connect the AC Adapter cable.

■ Security codes of the UIM

The UIM has a Security code, namely

PIN. It is set "0000" at the subscription.

They can be changed by yourself. (P.93)

1Put your thumb nail into the

groove, hold it up in the direction

of the arrow ( ) to remove the

back cover.

2Remove the battery pack, and

insert the UIM into the holder with

the gold-colored contacts facing

down.

･Check the insert direction (corner cut)

of the UIM.

UIM Inserting UIM

Groove

Holder

UIM

Corner cut

SO-02C_E_TA.book 24 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

1Remove the back cover, the battery

pack, and slide the UIM out holding

it with your finger.

You can use microSD card for any other

compatible devices.

･When a microSD card is not inserted,

camera functions, playing or downloading

music or videos are not available.

･The FOMA terminal supports microSD card

of up to 2GB, and microSDHC card of up to

32GB (As of March, 2011).

1Put your thumb nail into the

groove, hold it up in the direction

of the arrow ( ) to remove the

back cover.

2Insert a microSD card into the

holder with the gold-colored

contacts facing down.

Removing UIM

microSD card

UIM

Inserting microSD card

Groove

Holder

microSD card

SO-02C_E_TA.book 25 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

1Remove the back cover, the battery

pack, and slide the microSD card

out with holding it with your finger.

The battery pack is not full charged when you

purchased the FOMA terminal.

Charging time is an estimate of the time

required to charge a completely empty

battery pack. Charging under low

temperature requires longer time.

The following time varies by the battery

condition or operating environment. For the

details, see (P.191).

Use the battery pack for SO-02C, SO05.

･The battery pack is a consumable

accessory. The usage duration of the

battery per one charge decreases gradually

each time the battery is recharged.

･When the usage duration per one charge

becomes about half of a new battery pack,

the life if the battery pack is assumed to be

almost over. It is recommended that you

replace the battery pack ahead of time.

Depending on the usage condition, the

battery pack may be inflated as it comes to

be end of its life. This is not a malfunction.

Removing microSD card

Charging

Charging time

AC Adapter Cable SO02

(included accessory)

Approx. 170 min.

Operation time on full charge

(estimate)

Continuous

stand-by time

FOMA/3G Stationary (Auto):

Approx. 400 hours

Moving (Auto):

Approx. 290 hours

Moving (3G static):

Approx. 360 hours

GSM Approx. 270 hours

(stationary)

Continuous call

time

FOMA/3G Approx. 340 min.

GSM Approx. 390 min.

Battery pack life

Continued on next page

SO-02C_E_TA.book 26 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

･Return all spent battery packs to

NTT DOCOMO or a dealer, or a

recycling shop to protect the

environment.

･The included AC adapter's power plug is

compatible with AC100V to 240V. For using

the FOMA terminal overseas, a plug adapter

that fits the electrical outlets in the country

you stay is needed. Do not use an electrical

transformer for overseas use to charge the

FOMA terminal.

･Use the included AC Adapter cable for

charging.

･When charging starts, the notification LED

turns on in red/orange/green. Green means

the remaining battery level reaches more

than 90%. To check the battery level, press

t from the Home screen, then tap

[Settings] X [About phone] X [Status] and

check "Battery level". When charging is

completed, "100%" is displayed in the

battery level.

･When you start charging the battery with the

FOMA terminal powered off, the power turns

on. However, you cannot operate the FOMA

terminal. Do not charge the battery in a

place where the use is prohibited such as in

airplane or hospital.

Do not charge the battery pack for

a long time (several days)

･If you remain charging the FOMA terminal

for a long time, the power supply starts from

the battery pack after completion of

charging. The usage time duration may be

short. In that case, please charge it again

correctly. For recharging, remove the FOMA

terminal from the AC Adapter cable and

reconnect it again.

1Put your thumb nail into the

groove, hold it up in the direction

of the arrow ( ) to remove the

back cover.

Charging

Li-ion 00

Attaching the battery pack

Groove

Continued on next page

SO-02C_E_TA.book 27 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

2Insert it in the direction of an arrow

( ) with "Sony Ericsson" label

facing up, joining the each tab of

the FOMA terminal and the battery

pack.

3Check the direction of the battery

pack and attach to the terminal

body ( ), press each tab to close

it firmly ( ).

1Remove the back cover, put your

thumb nail into the groove of the

FOMA terminal, hold the battery

pack up in the direction of the

arrow ( ) to remove.

❖Information

･When attaching/removing the battery pack, make

sure to power off the FOMA terminal.

1Insert the supplied microUSB

cable horizontally with the

microUSB plug engraved side

facing up into the connector for

USB cable of the FOMA terminal.

Tab

Battery pack

Removing the battery pack

Charging with the AC Adapter

Groove

Continued on next page

SO-02C_E_TA.book 28 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

2Insert the microUSB cable

horizontally with the USB plug

engraved side facing up into the

connector for USB of the AC

Adapter, and insert the AC Adapter

plug to the power outlet.

3When the charging is completed,

remove the microUSB plug of the

microUSB cable from the FOMA

terminal.

4Remove the AC Adapter from the

power outlet.

❖Note

･If the microUSB cable is connected into the

connector for external devices for charging etc,

the FOMA terminal is automatically powered on.

Be careful not to connect the microUSB cable in a

place where the use is prohibited such as in

airplane or hospital.

1Insert the microUSB cable

horizontally with the microUSB

plug engraved side facing up into

the connector for USB cable of the

FOMA terminal.

2Insert the USB plug of the

microUSB cable into the USB port

of a PC.

･When "PC Companion software"

screen appears on the FOMA

terminal, tap [Skip].

･When a screen for new hardware

detection etc. appears on the PC,

select [Cancel].

3When the charging is completed,

remove the microUSB plug of the

microUSB cable from the FOMA

terminal.

4Remove the USB plug of the

microUSB cable from the USB port

of the PC.

❖Note

･If the microUSB cable is connected into the USB

connection jack for charging etc, the FOMA

terminal is automatically powered on although the

operations are not available. Be careful not to

connect the microUSB cable in a place where the

use is prohibited such as in airplane or hospital.

･Check the connecting direction to connect

correctly. Wrong connection may cause damage.

Charging with a PC

Continued on next page

SO-02C_E_TA.book 29 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

1Press p for over a second.

･The key lock screen appears.

2Deactivate the key lock.

･For deactivating the key lock, see

"Unlocking the keys" (P.31).

❖Information

･The first time you turn ON, "Setup guide" (P.31)

appears.

･If you activate the screen lock or SIM card lock, a

PIN code entry screen appears when turning

power on. Enter the PIN code and tap [OK]. To

correct the wrong PIN entry, tap / .

1Press p for over a second.

･Phone options menu appears.

2Tap [Power off].

3Tap [OK].

When the key lock is set, the screen light

turns off. You can avoid the touch screen or

button from false operations.

･The FOMA terminal keys are locked with

turning the screen light off after the

specified time duration.

1Press p.

Turning power on and off

Turning power on

microUSB plug

Notification LED

AC adapter

USB plug

microUSB cable

Turning power off

Setting Key lock

Continued on next page

SO-02C_E_TA.book 30 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

❖Information

･For details on settings for turning the backlight off

and the duration of time before the key lock

activation, see "Adjusting the idle time before the

screen turns off" (P.90).

･There is no function to deactivate the key lock.

･If you set the screen lock, entering the pattern, PIN

or password is needed before the screen unlock.

For details on the screen lock settings, see "Screen

lock" (P.93).

A key unlocking screen appears when

turning the power on or the backlight on by

pressing p/y.

1Touch and drag to until

it laps over.

❖Information

･ appears on the right until you touch . You

can switch the ringtone ON/OFF without unlocking

the keys and screen by touching and

dragging to the left.

When you turn on the FOMA terminal for the

first time, Setup guide appears to import

contacts saved in the UIM and the microSD

card and make settings of language, date

and time, etc.

❖Information

･Even if you skip Setup guide, you can set or

change the items later as required. To change the

settings later, from the Home screen, press ,

then tap [Settings] or [Setup guide] to set up from

the menu.

1Press p for over a second.

･A screen for selecting language

appears.

2Tap [English (United States)] X

[次へ (Next)].

･"Welcome Learn how to use the phone

with this easy guide" appears. You

can check the operations of main

functions and initial settings.

3Tap [Next].

･Tap [Change] to change Date & time

(P.103).

4Tap [Next].

･Tap [View] to check how to use the

keyboard.

Unlocking the keys

Key lock

Initial settings (Setup guide)

Continued on next page

SO-02C_E_TA.book 31 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

5Tap [Next].

･Tap [View] to check how to use the

application Timescape.

6Tap [Next].

･Tap [Import] X [Yes] to import

contacts in SIM.

･Tap [Set up] to make settings of

Wireless network (P.82), Google

account (P.97), Email (P.105) and

Timescape (P.155).

7Tap [Next] X [Finish].

The Home screen appears.

❖Information

･To set the online service settings, enabling data

connection (3G/GPRS) is required. For checking

the data connection status, see "Status icons"

(P.32).

A status bar appears at the top of the screen.

In the status bar, the FOMA terminal status

and notification are displayed. Notification

icons appear on the left side, and the FOMA

terminal status icons appear on the right side

of the status bar.

❖Note

･If you cancel the status bar forcibly (P.96),

operations may not be performed correctly.

The status icons displayed on the screen are

as follows.

Status bar

Status icons

Signal strength Connecting to

Bluetooth device

During International

roaming

GPS function is

activated

No signal During Data

synchronization

FOMA HIGH-

SPEED available

Airplane mode is

activated

Sending and

downloading via

FOMA HIGH-

SPEED

Silent mode

(vibration) ON

GPRS available Sound OFF

(Ringtone volume 0)

Sending and

downloading GPRS

data

Speakerphone on

3G available Microphone is set

to mute

Sending and

downloading 3G

data

An alarm is set

Connecting to Wi-Fi Battery status

Continued on next page

SO-02C_E_TA.book 32 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

The notification icons displayed on the

screen are as follows.

Wi-Fi open network

available

The battery is

charging

The Bluetooth

function is ON.

UIM is locked or not

inserted.

Notification icons

New email

message

Missed call

New Gmail

message

New voice mail

New SMS message Upcoming calendar

event

Problem with SMS

message delivery

Playing a track

New instant

message

FM radio in use

New Facebook

message

USB is connected

Uploading data to

Facebook

HDMI connected

Uploading data to

Facebook

completed

Data

communication

invalid

Receiving/

Downloading data

Connecting to a

VPN

Sending/Uploading

data

Not connected to a

VPN

Data connected via

Bluetooth

Media server

activated

Installation is

completed (when

installing

applications from

Android Market,

etc).

Media server

connection

notification

Software update

notification or

updating software

Client device is

connected to Media

server

Update notification

(when update of the

installed market

application is

notified)

Red: Error

messages

Yellow: Warning

messages

Calling Problem with

sign-in/sync

Calling with

Bluetooth device

Setup guide

unchecked

Call on hold More (undisplayed)

notifications

SO-02C_E_TA.book 33 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

Notification icons are displayed in the

Notification panel. You can open notifications,

such as messages, remainders, or event

notifications directly from the Notification

panel.

1Drag the status bar downwards.

･Press x to close the Notification

panel.

1From the Notification panel, tap

[Clear].

❖Information

･Some notifications cannot be cleared.

Notification LED provides information on the

FOMA terminal status, incoming/receiving,

etc.

Notification panel

Opening/Closing the

Notification panel

Clearing the Notification panel

Notification LED

LED status

Status Indication

Red The battery is charging when

the remaining battery level is

less than 10 %.

Flashing red The battery level is not enough

for activating the FOMA

terminal for turning ON.

Green The battery is charging when

the remaining battery level is

more than 90 %.

Flashing green Missed calls, incoming

messages (SMS) or emails

exist.

Orange The battery is charging when

the remaining battery level is

10 % - 90 %.

SO-02C_E_TA.book 34 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

* In this manual, each key operation is described with

x, y, t.

Precautions on using touch screen

･Touch screen is designed for being touched

lightly with fingers. Do not push it forcibly

with a finger or press it with sharp objects

(nail, ballpoint pen, pin, etc.).

･Touching the touch screen may not work in

the following cases. Note that it may cause

malfunction.

- Operation with gloved hands

- Operation with tip of fingernail

- Operation with foreign object on the

screen

- Operation with protective sheet or seal on

the screen

Basic operations

Basic hardware key operation

xBack ･Go back to the previous

screen. Or close a dialog box,

an options menu, or the

Notifications panel.

･Close the software keyboard.

yHome ･Go to the Home screen.

･Press and hold down for over

a second to open the recently

used applications window.

tMenu ･Open a list of options available

in the current screen or

application.

･Press and hold down for over

a second when entering

characters switches display/

not display the software

keyboard.

･From the Home screen, press

and hold down for over a

second to display the

keyboard. Tap any key to start

Google Search.

Using the touch screen

SO-02C_E_TA.book 35 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

Operations on the touch screen

■ Tap

Touch an item such as icon or menu with

your finger lightly and release it.

･Double-tap means tapping twice

quickly.

■ Touch

Touch and hold an icon or menu item

long.

■ Flick

Stroke the screen with your finger lightly

and flick up/down/left/right.

Flick operation is used to switch or scroll

the screen.

■ Drag

Touch the screen, drag to the desired

position and release the finger.

■ Pinch

Touch the screen with two fingers and

widen (pinch-out) or narrow (pinch-in) the

fingers' distance.

On some screens, pinch-out to zoom in

and pinch-in to zoom out.

❖Information

･You can zoom in or out also by double-tapping or

by tapping the zoom control icons ( /

). The zoom control icons may appear when

you drag in any direction on the screen.

SO-02C_E_TA.book 36 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

Some lists have Japanese syllabary and

alphabetic index on the right side of the

screen.

･Drag your finger along the index to scroll

through the list.

･Tap the index character to move on the list.

You can switch ON/OFF of the option settings

by marking or unmarking the checkboxes or

radio buttons.

･To switch ON/OFF of the option setting, tap

the checkbox or radio button.

■ Checkboxes

■ Radio buttons

Selecting items quickly from a

list

Marking or unmarking options

Marked

Unmarked

Marked

Unmarked

SO-02C_E_TA.book 37 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

The Home screen is the starting point of the FOMA terminal. You can personalize the Home

screen by adding or moving, for example, application shortcuts and widgets, or changing the

wallpaper. The Home screen can be extended with two screens for the left and right.

aWidget: Status switch

bWallpaper

cShortcuts (applications)

dWidget: Google search (P.42)

eHome screen position

fWidget: TimescapeTM

gWidget: Music player

hWidget: Photos and videos

iWidget: TrackIDTM

jMedia folder (Gallery, Music and FM radio)

kApplication button

lWidget: Media shortcuts

Home screen

eb f g h

c k c l

da c i

j c

SO-02C_E_TA.book 38 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

1Flick the Home screen to left or

right.

･The Home screen switches.

❖Information

･You can check the current position of the Home

screen with at the top of the screen.

1From the Home screen, press

2Tap [Add].

･"Add to home screen" menu appears

to change the Home screen.

■ Add to home screen

❖Information

･"Add to home screen" appears also by touching

and holding anywhere on the Home screen without

icons.

Adding a shortcut on the Home

screen

1In "Add to home screen" menu, tap

[Shortcuts].

2Select a shortcut you want to add.

･The shortcut appears on the Home

screen.

❖Information

･You can add shortcuts of applications on the Home

screen also by the following operation.

- From the Home screen, tap , touch and hold

down an icon until the Home screen appears

and release the finger where you want to place

the shortcut.

Adding widgets

1In "Add to home screen" menu, tap

[Widgets].

･A list of widgets appears.

Switching the Home screen

Changing the Home screen

Shortcuts Add shortcuts of applications or

setting screens. (P.39)

Widgets Add widgets. (P.39)

Folder Add folders to collect shortcuts,

etc. (P.40)

Wallpapers Change the wallpaper. (P.41)

Analogue

clock

Display the analog clock.

Calendar Display the calendar.

Data traffic Switch ON/OFF of data

communication.

Digital clock Display the digital clock.

Facebook View comments of members.

Google Search Display the Quick search box.

Home screen

tips

Display tips of the Home screen

operation.

Continued on next page

SO-02C_E_TA.book 39 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

2Select an item.

❖Information

･If you install an application with widget from

Android Market, the installed widget is added to

the widget list.

Displaying widget on the Home

screen by a list

1From the Home screen, pinch-in.

･A list of the widgets on the Home

screen appears.

❖Information

･To return to the Home screen, pinch-out or tap [Exit

overview].

Adding a folder to the Home

screen

1In "Add to home screen" menu, tap

[Folder].

2Select the folder icon you want to

add.

･To change the folder name, tap

[Create new folder] entry box.

3Tap [Done].

･The folder appears on the Home

screen.

Latitude View locations of members.

Market Display recommended

applications of Android Market.

Media

shortcuts

Display Music player and Gallery

(photos, videos).

Music player Display Music player.

News &

Weather

Display news and weather.

Photos and

videos

Display shot photos and videos.

Picture frame Crop the shot photo to display on

the Home screen.

Power Control Display the setting buttons for

turning on Wi-Fi

function

, Bluetooth

function

, the GPS function,

synchronization and brightness

(switch).

Rate Places Display information of nearby

stores or post word of mouth.

Status switch Display the setting buttons for

turning on Airplane mode,

Bluetooth function, the GPS

function, Wi-Fi, and for switching

speakerphone ON, vibrate, and

Mobile network settings.

TimescapeTM

widget

Display the latest Timescape tile.

TrackIDTM Display TrackIDTM.

YouTube Display the list of frequently played

movies and recommended.

SO-02C_E_TA.book 40 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

Adding items to a folder

1From the Home screen, touch and

hold a shortcut icon until the

FOMA terminal vibrates.

2Drag the shortcut icon over to the

folder.

3Release your finger from the icon.

･The shortcut is added in a folder.

Renaming a folder

1Tap the folder to open it.

2Touch and hold the title bar of the

folder.

･A dialog box for changing folder

settings appears.

3Tap entry box of [Folder name] and

enter a folder name, and tap

[Done].

･To change the folder icon, tap a folder

from [Select folder icon].

Changing wallpaper

1In "Add to home screen" menu, tap

[Wallpapers].

2Tap[Gallery]/[Live wallpapers]/

[Sony Ericsson wallpapers].

･When you tap [Gallery], select an

image to set to the wallpaper, pinch

the cropping frame or drag it to area

you want to use as wallpaper, and tap

[Save].

･When you tap [Live wallpapers],

select a content, tap [Set wallpaper].

You can also download and add Live

wallpaper content from a web page.

･When you tap [Sony Ericsson

wallpapers], select an image to set to

the wallpaper, tap [Select wallpaper].

❖Information

･From the Home screen, you can also press t

and tap [Wallpaper].

1From the Home screen, touch and

hold an icon until the FOMA

terminal vibrates.

2Keep touching the icon and drag it.

･To move to another Home screen,

keep touching the icon and drag to

left or right.

3Release your finger from the icon.

Moving an icon on the Home

screen

SO-02C_E_TA.book 41 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

1From the Home screen, touch and

hold an icon until appears at

the bottom of the screen.

2Drag the icon to .

･The icon lights up in red.

3Release your finger from the icon.

Enter a word in the search box to browse the

information in the FOMA terminal or on the

Internet.

1Tap the search box (P.38) on the

top of the browser screen.

･The software keyboard appears.

2Enter a search word.

･Search suggestions appear as you

enter a character.

･For character entry, see "Character

entry" (P.46).

3Tap a search item or .

･To enter a search word again, press

❖Information

･Tap to set the search range from "All", "Web"

and "Apps".

･Tap to enter a search word by voice to browse

the Internet.

You can set search engines to use for Quick

search box or set search objectives in the

FOMA terminal.

1From the Home screen, tap ,

then tap [Google Search].

2Press t, then tap [Search

settings].

･A search settings screen appears.

You can set the following items.

Deleting an icon from the Home

screen

Searching information in

the FOMA terminal and

web pages

Search settings

Google search You can set whether to display

search options when a search

word is entered, or whether to

reflect the previous search result

in the search options. You can

also open the web search log

settings page by Browser.

･You need to create your

Google account.

Continued on next page

SO-02C_E_TA.book 42 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

You can access the applications installed in

the FOMA terminal using the Applications

screen.

1From the Home screen, tap .

･On the Applications screen, flick left

or right to switch the Applications

screen.

❖Information

･To close the Applications screen, tap or press

x or y .

The applications displayed on the

Applications screen by default are as follows.

Searchable

items

You can change the search

range by marking/unmarking

data categories (web,

application, contacts selection

list, music search) in the FOMA

terminal to search.

Clear shortcuts You can set not to display

recently selected search results.

Applications screen

Displaying applications screen

Application button

Applications

Icon Application Description

docomo market Quick access to the

DOCOMO

recommended web

pages or convenient

applications.

BeeTV Watch programs for

mobile phone after

E★エブリスタ

(E★eburista)

View electronic

books.

BOOK ストア

2Dfacto (Book

store 2Dfacto)

View electronic books

PlayNow Browse a variety of

benefic information.

Contacts Keep contacts of your

friends and

colleagues.

Phone Make and receive

calls, and switch

between calls.

Messaging Send and receive

message (SMS).

Browser Browse Web and

WAP sites (except for

WML) and download

files.

Continued on next page

SO-02C_E_TA.book 43 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

TimescapeTM Keep track of all daily

communication and

media events.

Settings Make the FOMA

terminal settings.

Setup guide Display Setup guide.

Music Play music.

Gallery View photos and

videos.

Clock Set an alarm, clock,

etc.

Email Send and receive

emails (multiple

accounts are also

available).

Market Download and buy

new applications.

Calendar Keep track of your

schedule.

Maps View current location,

find another locations

and calculate routes.

Gmail Email application

Talk Chat on Google Talk.

Navigation Display Google Map.

Places The application using

information registered

on Google Map

Icon Application Description

Latitude A communication tool

to share and use your

location information

with members

Calculator Perform basic

calculations such as

addition, subtraction,

multiplication, and

division.

YouTube Share and view

videos from all over

the world.

Evernote The application for

managing private

online files

spモードメール

(sp-mode mail)

Email application

定型文

(Fixed phrase)

Manage phrases to

quote when entering

characters.

Instruction

Manual

Display the FOMA

terminal instruction

manual.

News & Weather Display news and

weather.

Downloads Display a list of

downloaded items.

PhoneBookCopy Copy contacts data to

the other FOMA

terminal.

Icon Application Description

Continued on next page

SO-02C_E_TA.book 44 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

❖Information

･Some application names may not be displayed

fully.

You can sort the applications displayed on

the Applications screen from the "Sorting"

menu.

1On the Applications screen, tap

･"Sorting" menu appears.

Phonebook

backup

Back up contacts

data

OfficeSuite Browse and read text

documents.

TrackIDTM Music information

confirmation service

Google Search Search information in

the FOMA terminal

and web pages.

Voice Search Search by voice.

Media server Set up and manage

Media server.

Startup Guide Supports basic

operation and initial

settings of docomo

smartphone.

FM radio Listen to FM radio.

ToruCa Download store

information or coupon

from a portal website.

Camera Take photos and

record video clips.

Campaign Navi View campaign

information for Xperia.

mora touch mora touch, the music

download site

Facebook Sign in to Facebook.

Alarms Set alarm clock.

Icon Application Description

life.episodeTM View the latest

information such as

news or music.

Sorting applications

Custom sorting Select an application icon to

sort. (P.46)

Alphabetical Sort in alphabetical order.

Most used Sort in frequency order.

Recently installed Sort in install date order.

Icon Application Description

SO-02C_E_TA.book 45 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

Selecting an application to move

1On the Applications screen, tap

, then drag an application icon

you want to move.

･If does not appear on the

Applications screen, select "Custom

sorting" from the "Sorting" menu (P.45).

2Release your finger from the

application icon.

･The application icon moves.

3Tap .

❖Information

･To move icons to another Applications screen,

drag the icon to the side edge of the screen.

･To add the Applications screen, drag the icon to

the rightmost screen.

You can view and access recently used

applications from this window.

1Press y for over a second.

･A recently used applications appear

on a list.

To enter characters, use the software

keyboard which appears when you tap the

character input box in a message, contacts,

etc.

❖Information

･Press x to return to the previous screen from

the character entry screen.

In this FOMA terminal, you can select Input

method (keyboard type) from "Chinese

keyboard", "Japanese keyboard" and "Default

input".

1On a character entry screen, touch

and hold the text box.

2Tap [Input method] X [Chinese

keyboard]/[Default input]/

[Japanese keyboard].

Opening the recently used

applications window

Character entry

Selecting input method

Chinese

keyboard

Select to enter Chinese.

Default input Select a language for text entry.

Select to enter language other

than Japanese.

Japanese

keyboard

Select to enter Japanese.

Continued on next page

SO-02C_E_TA.book 46 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

❖Information

･You can change Input method (keyboard type)

during character entry.

For Japanese keyboard, there are two types

of software keyboards: QWERTY and numeric

key.

❖Information

･The key display of software keyboard varies

depending on the entry screen, character mode or

settings.

■ QWERTY software keyboard

Japanese characters can be entered in

"Romaji input" mode.

■ Numeric software keyboard

Japanese characters can be entered in

"Kana input" mode.

1On the character entry screen,

touch and hold the character mode

icon .

2Tap / .

･: The numeric software keyboard

appears.

･: The QWERTY software keyboard

appears.

❖Information

･The QWERTY software keyboard is set by default.

Also, "Popup on key press", "Auto capitalization",

"Word suggestion" and "Error correction" are set to

on.

Software keyboard

Portrait

Landscape

Switching the keyboard

Portrait

Landscape

SO-02C_E_TA.book 47 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

Use the QWERTY software keyboard to enter

Japanese characters in "Romaji input" mode.

The main functions of the touch-

keys

･To change character modes and other input

operations, tap the following icons on the

QWERTY software keyboard.

Entering characters on the

QWERTY software keyboard

Icon Function

/Each time you tap, the character mode

switches "Number" → "Hiragana/Kanji

→ "Alphabet" in order.

あ: Hiragana/Kanji

Aa: one-byte alphabet/Ａ: two-byte

alphabet

12: one-byte number/ １: two-byte

number

Touch and

hold

Display a character mode switch

window.

Keyboard switch: /

Character mode switch:

(two-byte), (one-byte)

Each time you tap this icon, a list of

pictograms (only for sp mode mail)

one-byte symbols, two-byte symbols

and smileys can be switched.

Touch and

hold

A list of plug-in applications appears

and you can activate the plug-in

application.

Enter punctuation marks such as ? and

Flick from side to side and enter a

space, ・, ∼, …, 「, 」, (, and ).

Move the cursor*1 to the left. Touch and

hold to move continuously. Or change

the range for conversion.

Move the cursor*1 to the right. Touch

and hold to move continuously. Or

change the range for conversion.

When there is an unfixed character

string with the cursor at the right end,

tap to enter the same character as the

one at the end.

*2Fix input characters and converted

characters. When characters are

already fixed, enter a line feed at the

cursor position.

Delete the character before the cursor.

Touch and hold to delete characters

continuously.

Appears in Japanese (Romaji) input

mode. Make settings of "Change

settings" and "Input Method".

Appears before conversion is fixed.

Tap to switch conversion methods to

"直変換".

In alphanumerics input mode, tap to

switch upper case and lower case.

In number input mode, tap to switch

symbols possible to enter with the

keyboard.

Icon Function

Continued on next page

SO-02C_E_TA.book 48 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

*1 When any characters are entered, just touch the

desired position on the entered character string to

move the cursor.

*2 On some screens such as the search box or mail

account registration screen, "Next", "Done", "Go", etc.

appear.

Changing display keys

･For Japanese input, you can set not to

display less-frequent-used keys (Q, X, C,

etc.) on the QWERTY software keyboard.

1When entering characters with

QWERTY software keyboard, tap

2Tap [Change settings] X [Select

display keys].

3Unmark the checkbox of the key

you want to hide.

4Tap [OK].

Changing symbols

･You can change symbols (12) displayed in

(Symbol assistant area) to the ones

you use frequently.

1When entering characters with

QWERTY software keyboard, tap

2Tap [Change settings] X [Change

symbols].

･A list of 12 symbols to be displayed

on QWERTY software keyboard

appears.

3Tap a symbol you want to change

and delete character previously

set, then enter a character to

display.

4Tap [OK].

SO-02C_E_TA.book 49 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

Selecting an assistant keyboard

When you enter in Hiragana/Kanji input mode

using the QWERTY software keyboard, you

can change the assistant keyboard to make

the frequent using keys to be displayed

widely for easy tapping.

1When entering characters with

QWERTY software keyboard, tap

2Tap [Change settings] X [Choose

key type].

3Tap any of [Static key resizing]/

[Key highlight while typing]/

[Dynamic key resizing with

highlight]/[Off].

■ Static key resizing

Widen frequent using key for easy

tapping.

■ Key highlight while typing

Widen frequent using key and highlight

the key that is predicted for the next entry.

■ Dynamic key resizing with highlight

Widen the key that is predicted for the

next entry much further and highlight it.

■ Off

Display equally the width of each key.

SO-02C_E_TA.book 50 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

Use the numeric software keyboard to enter

Japanese characters in "Kana input" mode.

The main functions of the touch-

keys

･To change character modes and other

entering operations, tap the following icons

on the numeric software keyboard.

*1 When any characters are entered, just touch the

desired position on the entered character string to

move the cursor.

*2 On some screens such as the search box or mail

account registration screen, "Next", "Done", "Go", etc.

appear.

Entering characters on the

numeric software keyboard

Icon Function

/Each time you tap, the character mode

switches "Number" → "Hiragana/Kanji

→ "Alphabet" in order.

あ: Hiragana/Kanji

Aa: one-byte alphabet/Ａ: two-byte

alphabet

12: one-byte number/ １: two-byte

number

Touch and

hold

Display a character mode switch

window.

Keyboard switch: /

Character mode switch:

(two-byte), (one-byte)

Each time you tap this icon, a list of

pictograms (only for sp-mode mail)

one-byte symbols, two-byte symbols

and smileys can be switched.

Touch and

hold

A list of plug-in applications appears

and you can activate the plug-in

application.

Appears before conversion is fixed to

switch conversion methods

("予測変換 ", "直変換").

Display the previous character

(opposite order).

Appears before conversion is fixed to

return to text before conversion.

Move the cursor*1 to the left. Touch and

hold to move continuously. Or change

the range for conversion.

Move the cursor*1 to the right. Touch

and hold to move continuously. Or

change the range for conversion.

When there is an unfixed character

string with the cursor at the right end,

tap to enter the same character as the

one at the end.

*2Fix entered or converted characters.

When characters are already fixed,

enter a line feed at the cursor position.

Delete the character before the cursor.

Touch and hold to delete characters

continuously.

Display the first candidate of direct

conversion. When any character is

entered, a space can be entered.

Icon Function

SO-02C_E_TA.book 51 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

Settings of key entry

■ Flick input

Flick up/down/left/right to enter

characters in each column of kana

syllabary.

･Ex: Entering characters in "な"

column

You can enter "な" only by touching. Flick

left for "に", up for "ぬ", right for "ね" and

down for " の".

･To switch upper/lower case or change to

voiced sound, tap .

･Flick input is available by default. You

can cancel by the following operation

beforehand.

aFrom the Home screen, press t

and tap [Settings].

bTap [Language & keyboard] →

[Japanese keyboard].

cUnmark the checkbox of "Flick

input".

■ Toggle entry

Tap the same key continuously to enter

the assigned character.

To enter characters assigned to the same

key continuously, operate the followings.

･Ex: To enter " あお"

aTap " あ" once.

bTap , and tap "あ" 5 times.

･Ex: To enter "ca"

aTap "ABC" 3 times.

bTap , and tap "ABC" once.

❖Information

･When a certain time is passed after the key

tapped, the tapped key's highlighter goes off and

you can enter a character assigned to the same

key consecutively without tapping .

･To switch upper/lower case or change to

voiced sound, tap .

･Operate the following to enter

characters in the toggle entry while Flick

input is set.

aFrom the Home screen, press t

and tap [Settings].

bTap [Language & keyboard] →

[Japanese keyboard].

cMark [Multitap text input] checkbox.

ぬ

ねに

の

な

Flick up Tou c h

Flick right

Flick left

Flick down

SO-02C_E_TA.book 52 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

While entering characters, touch and hold the

text box to display the "Edit text" menu and

edit entered text.

For each type of keyboard, you can make

settings related to character entry.

1From the Home screen, press

t, then tap [Settings] X

[Language & keyboard].

2Tap [Default input]/[Japanese

keyboard]/[Chinese keyboard].

･The settings screen for each

keyboard appears. Tap an item

displayed on the screen to set.

❖Information

･The items vary depending on the keyboard type.

･The setting screen for "Chinese keyboard" is

displayed in English. When Select language

(P.102) set to Chinese (中文), it appears in

Chinese.

You can make keyboard settings such as Key

sound, Vibrate, etc.

1From the Home screen, press t

and tap [Settings] X [Language &

keyboard] X [Japanese keyboard].

･The setting screen for Japanese

keyboard appears. Tap [12 key

keyboard settings] to set the items.

Editing text

Select word Drag the slider to select a part of

entered text.

Select all Select all entered text.

Input method P. 4 6

Add "xx" to

dictionary

Add the entered text to the

dictionary.

Cut Display when "Select word"/"Select

all" is selected. Cut the text selected

by "Select word"/"Select all".

Copy Display when "Select word"/"Select

all" is selected. Copy the text

selected by "Select word"/"Select

all".

Paste Display when "Cut"/"Copy" is

selected. Paste the cut/copied text

by "Cut"/"Copy".

Settings of entering

characters

Settings of Japanese

keyboard

12 key keyboard settings

Key sound Set whether to sound at the

time of key tapping.

Vibrate Set whether to vibrate at the

time of key tapping.

Continued on next page

SO-02C_E_TA.book 53 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

You can change keyboard skin.

1From the Home screen, press

t, then tap [Settings] X

[Language & keyboard].

2Tap [Japanese keyboard] X [Select

keyboard skin].

3Select a keyboard and tap [Set

skin].

❖Information

･You can also download and add keyboard skins

from a website.

The Word suggestion function shows

predicted conversion candidates when you

enter Japanese/English characters. Mark the

checkbox of Word suggestion checkbox to

set options "Error correction" and "Auto

space" These options help you entering

characters with ease.

Setting Word suggestion

1From the Home screen, press

t, then tap [Settings] X

[Language & keyboard].

2Tap [Japanese keyboard].

3Mark [Word suggestion] checkbox.

Setting Error correction

･Error correction corrects mistyped

characters and shows conversion

candidates before conversion in one-byte

alphabet input mode when entering

characters with QWERTY software

keyboard.

1From the Home screen, press

t, then tap [Settings] X

[Language & keyboard].

2Tap [Japanese keyboard].

Popup on key

press

Set to popup the key you have

tapped at the time of key

tapping.

Auto

capitalization

Set to capitalize automatically

the top letter you enter in

English input mode.

Keep keyboard

type

Set to stabilize the last status of

keyboard by screen orientation

and kana/alphabet/number

input mode.

Keyboard skin

Word suggestion

Continued on next page

SO-02C_E_TA.book 54 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

3Mark [Error correction] checkbox.

Setting Auto space

･When selecting English word suggestion,

Auto space enters a space next to the

entered character. However, space is not

entered automatically in the mail address or

URL input fields.

1From the Home screen, press

t, then tap [Settings] X

[Language & keyboard].

2Tap [Japanese keyboard].

3Mark [Auto space] checkbox.

To display the word as the preferred

candidate when entering characters, set the

user dictionary beforehand.

Registering words in user

dictionaries

There are two types of user dictionaries: "My

words Japanese" (Kana/Kanji) and "My words

English" (one-byte alphabet).

1From the Home screen, press

t, then tap [Settings] X

[Language & keyboard].

2Tap [Japanese keyboard].

3Tap [My words Japanese]/[My

words English].

4Press t, then tap [Add].

5Tap the character input box for

"Reading" and fill it out, then tap

[次へ (Next)].

6Enter a word in the input box for

"Word" and tap [完了 (Done)].

7Tap [Save].

Setting Words by learning

1From the Home screen, press

t, then tap [Settings] X

[Language & keyboard].

2Tap [Japanese keyboard] X [Words

by learning].

3Mark [Save word while typing].

･To reset all learning, tap "Delete saved

words" X [OK].

User dictionary

SO-02C_E_TA.book 55 ページ２０１１年５月２４日　火曜日　午後２時３３分

Before Using the Handset

SO-02C Web_TA

You can quote phrases with the plug-in

application "定型文 ". To call up "定型文",

touch and hold down / when entering

characters. Phrases are saved in 5

categories of "インターネット (Internet)",

"あいさつ (Greeting)", "ビジネス (Business)",

"返事 (Reply)", "プライベート (Private)" in

advance. You can add, delete and edit

categories and phrases.

Adding a category of phrases

Add a new category and register a phrase.

1From the Home screen, tap ,

then tap [ 定型文 (Fixed phrase)].

A list of categories appears.

2Press t, then tap [カテゴリー追

加 (Add category)].

3Enter the category name and tap

[OK].

4Tap [ 新規追加 (Add phrase)] and

enter a phrase.

5Tap [OK].

❖Information

･When you tap each category, a list of registered

phrases appears. Tap a phrase to edit/delete.

･To restore the default phrases, in the category list,

press t, then tap [ 初期化 (Reset)].

You can install and add plug-in applications

to use when entering characters.

1From the Home screen, press

t, then tap [Settings] X

[Language & keyboard].

2Tap [Japanese keyboard] X

[Manage applications].

3On the Info screen, tap [OK].

The plug-in setting screen appears.

4Tap [Download new applications].

5Tap an application and follow the

onscreen instructions.

❖Information

･Marked plug-in applications in the plug-in setting

screen can be activated in the character entry

screen.

Using plug-in application "定型

文 (Fixed phrase)"

Adding a plug-in application

SO-02C_E_TA.book 56 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

1From the Home screen, tap

[Phone].

2Enter the number of the recipient

and tap [Call].

･If a wrong number is entered, tap

on the right of the phone number field

to delete the number.

Entering pause (,)

This function allows you to operate voice mail

at home, to reserve tickets or to check the

balance of a bank account, etc.

1From the Home screen, tap

[Phone].

2Enter the number of the recipient

and touch and hold the asterisk (*)

key until a comma (,) appears.

When the FOMA terminal is within range of

the service area, you can make an

emergency call of 110 (Police), 119 (Fire and

ambulance) or 118 (Japan Coast Guard).

1From the Home screen, tap

[Phone].

2Enter the emergency number and

tap [Call].

･If a wrong number is entered, tap

on the right of the phone number field

to delete the number.

❖Note

･In Japan, when UIM is not inserted to the FOMA

terminal, the emergency numbers of 110/119/118

are not available.

･

This FOMA terminal supports "Emergency call

location information". If you use the FOMA terminal

to place a call to emergency numbers such as 110,

118, or 119, the information of a location where you

are calling from (location information) is

automatically notified to the Emergency call

acceptance organization such as the Police

Station.

The Emergency call acceptance organization may

not be able to figure out your exact location

depending on the location where you place a call

or radio wave condition.

If you make a call without the caller ID, such as by

entering a phone number with "184" for each call,

the location information and phone number are not

notified. However, the Emergency call acceptance

organization may decide to obtain the location

information and phone number regardless of your

settings when they consider it is necessary for

lifesaving, etc. Note that the areas/time for which

the "Emergency call location information" is ready

to be used vary depending on the preparatory state

of each Emergency call acceptance organization.

Making/Receiving calls

Making a call

Making an emergency call

Calling/Network Ser vices

Continued on next page

SO-02C_E_TA.book 57 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

･When you call the Police (110), Fire/Ambulance

(119), or Maritime rescue (118) from the FOMA

terminal, clearly indicate that you are calling from a

mobile phone, then give your present location and

mobile phone number. Also, make a point to call in

a stationary position to prevent the call from being

dropped. Do not power off the FOMA terminal for

at least 10 minutes after the emergency call just in

case the Police or Fire/Ambulance may have to get

in contact with you.

･Note that you may not connect to the local Fire

Department or Police Station depending on where

you are calling from. In this case, try to call from a

public phone or an ordinary phone in the

neighborhood.

Making an emergency call while

UIM is locked

1Tap [Emergency call].

2Enter the emergency number and

tap [Call].

･If a wrong number is entered, tap

on the right of the phone number field

to delete the number.

❖Note

･In Japan, while entering PIN code on the screen

(P.93) or during PUK lock (P.93), the emergency

numbers of 110/119/118 are not available.

1Tap [End call].

For details on WORLD CALL, refer to

DOCOMO International Services website.

1From the Home screen, tap

[Phone].

2Touch and hold [0] key until "+"

sign appears.

･When making an international call, "+"

is replaced by an international access

code.

3Enter the country code X Area

code X A phone number of

recipient and tap [Call].

･If the area code begins with "0", omit

"0". However, "0" may be required to

dial to some countries or areas such

as Italy.

1While receiving a call, touch

(left) and drag it to (right).

❖Information

･If you are using regular headphones without a

microphone, you need to speak to the microphone

of the FOMA terminal.

Ending a call

Making an international call

(WORLD CALL)

Receiving a call

Continued on next page

SO-02C_E_TA.book 58 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

･The icon appears even during the screen lock or

key lock, and you can answer a call by the same

operation.

1While receiving a call, touch

(right) and drag it to (left).

❖Information

･The icon appears even during the screen lock or

key lock, and you can decline a call by the same

operation.

You can make or answer a call with Stereo

Headset with Microphone (Sample)

connecting to the FOMA terminal.

■ Making a call

1Make a call with Stereo Headset

with Microphone connected.

･An operation of making call is the

same as usual operation. (P.57)

2Press the switch to end the call.

■ Receiving a call

1While receiving a call, press the

switch of Stereo Headset with

Microphone.

･The call is connected.

･When receiving a call, you can

decline the call by pressing the switch

for over a second.

2To end a call, press the switch

again.

❖Information

･Even when you listen to music with Stereo Headset

with Microphone connecting to the FOMA terminal,

you can answer a call by pressing the switch.

Music pauses on calling, and restarts when ending

the call.

1Press m during a call.

Declining a call

Using Stereo Headset with

Microphone

Switch

Headset connection jack

Adjusting the ear speaker

volume

Continued on next page

SO-02C_E_TA.book 59 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

❖Information

･You can adjust the ear speaker volume only during

a call.

1Press m when a call is

received.

❖Information

･You can also press p to mute the ringtone for an

incoming call.

･To change ringtone volume other than when

receiving, press up or down of m on the

Home screen to adjust the ringtone volume.

By using the call option during a call, you can

make a call on hold or mute the microphone.

❖Note

･Do not bring the FOMA terminal close to your ear

with the speakerphone ON to avoid hearing

damage.

In the call log, missed ( ), received ( ),

and dialed ( ) calls are displayed with the

icons.

When you have missed calls, appears in

the status bar.

1Drag the status bar downwards.

2Tap [Missed call].

Muting the ringtone for an

incoming call

Call Options

Hold During a call, press t, tap [Hold].

To cancel hold, while a call is on hold,

tap [Retrive call].

･To set a call on hold, "Call waiting"

subscription is required. (P.74)

Contacts Display the contacts list during a call.

Speaker Set speakerphone ON/OFF.

･When the speakerphone is ON, a

speakerphone icon appears in

the status bar.

Mute Set muting ON/OFF of the microphone

during a call.

･When the microphone is muted, a

mute icon appears in the status

bar.

Dialpad Enter the phone number to add to

make a call.

･The ongoing call is automatically on

hold.

･To add a call, "Call waiting"

subscription is required. (P.74)

End call End a call.

Call log

Displaying missed calls

SO-02C_E_TA.book 60 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

1From the Home screen, tap

[Phone] X [Call log].

2Tap next to the desired number.

1From the Home screen, tap

[Phone] X [Call log].

2Tap and hold the number, then tap

[Add to Contacts].

･You can select [Add to Contacts] from

the menu displayed when you tap the

number.

3Tap desired contact, or tap [Create

new contact].

･Tap [Create new contact] to display a

screen for selection of the saving

locations appears. You can select

Phone contact or docomo account as

the saving location.

4Edit the contact details and tap

[Done].

1From the Home screen, tap

[Phone] X [Call log].

2Press t, and tap [Clear call

log].

❖Information

･You can delete only one contact by touching and

holding a contact to delete on the call log list, then

tapping [Delete from call log].

In Contacts, you can enter all your

information for your personal contacts, for

example, phone numbers, email addresses

and web service accounts. When you view a

contact, you get quick access to all

communication with that contact.

1From the Home screen, tap ,

then tap [Contacts].

･You can also open Contacts from the

Home screen, tap [Phone] X

[Contacts].

Calling a number from the call

log

Adding a number from the call

log to your contacts

Deleting the call log

Contacts

Opening Contacts

Continued on next page

SO-02C_E_TA.book 61 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

❖Information

･The first time you open Contacts, a setup wizard

starts. In the setup wizard, you can load contacts

from UIM or microSD card, or synchronize contacts

with the account that you specified in advance. To

use Contacts, tap [Open Phonebook].

On the Contacts screen, you can view details

of your contacts. You can add a contact

picture, and display updated information of

online services.

aSet conditions of contacts to display

bContact search field

cKey for adding a new contact

dYour own phone number

eA contact saved in Contacts

fJapanese syllabary or alphabetical index for

browsing contacts

gOnline status* of Google Talk (Chat) (P.111)

hUpdates from your Facebook contacts

iScreen tabs (Phone/Call log/Contacts/Favorites)

* Depending on the usage, it may be different from online

display of Google Talk.

Adding a contact

1From the Home screen, tap ,

then tap [Contacts].

2Press t, then tap [New

contact].

3Tap [docomo]/[Phone contact].

･When you set Google account etc., it

appears as a saving location.

4Enter a name.

5Enter or select the desired

additional information for the

contact.

･You can add items other than phone

number, email address and ringtone

by tapping [Add field].

6Tap [Done].

❖Information

･You can also add a contact by tapping c ()

on the Contacts screen (P.62).

･For using "Send calls directly to voicem.", a

subscription of Voice Mail service is required. For

details, see "Voice Mail Service" (P.72).

･When you save "ふりがな（姓／名） (Reading

(Last name/First name))", contacts list is displayed

according to Japanese syllabary order or

alphabets (only when Select language is set to 日

本語 (Japanese)).

Contacts screen

Managing contacts

SO-02C_E_TA.book 62 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

Using shortcuts of Contacts

When you tap the photo (image) part on

contacts list screen, shortcuts for phone

number, mail, etc. appear. Tap the shortcut to

make a call, or create and send a mail.

* You can also use the registered Google Talk account,

addresses, etc.

❖Information

･When you tap a part other than photo (image) on

the contacts list screen, "Info" filter screen (P.68) of

the contact appears instead of shortcuts.

･Email shortcut appears when email address is

saved in the selected contact and you have set

your email account.

Searching for a contact

1From the Home screen, tap ,

then tap [Contacts].

2Enter searching name or reading in

the search field.

･All contacts beginning with those

letters appear.

❖Information

･You can switch the view contacts between

"Contacts w. ph. number" and "Online contacts" by

tapping a ( ) on the Contacts screen (P.62).

Also, you can set to show/hide contacts by

account or group.

Editing a contact

1From the Home screen, tap ,

then tap [Contacts].

2Tap the name part of contact you

want to edit.

･"Info" filter screen (P.68) of the contact

appears.

･When you tap the image (photo) part

of the contact, contact shortcuts

appear. Tap to display "Info" filter

screen (P.68).

3Tap [Edit].

･By tapping (Add field) on the

editing screen, you can add

information to enter.

4Edit the desired information and

tap [Done].

Linking contacts

You can bind multiple contacts together into

one.

1From the Home screen, tap ,

then tap [Contacts].

Make a call to saved phone number.

"Info" filter screen (P.68) of the contact

appears.

Create and send message (SMS).

Select an email application to create and send

an email.

Continued on next page

SO-02C_E_TA.book 63 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

2Touch and hold the desired

contact, then tap [Join contacts].

･The link candidates appear.

3Tap the contact to link.

4Tap [OK].

❖Information

･To cancel link of contacts, on Contact edit screen,

press t, then tap [Separate].

Auto linking function

Contacts of the same name registered in

different saving locations separately are

automatically linked and collected as one.

■ Conditions automatically linked

If different saving locations (Phone contact/

docomo account/Google account) are

registered, they are automatically linked.

Examples:

* When you set two or more Google accounts etc., they

are recognized as different saving locations and the

contacts are automatically linked.

Alternatively, contacts whose saving

locations (account types) are different and

registered in any of the following conditions,

the contacts are automatically linked.

Examples:

Contacts are registered turning over the last

name and first name.

Saving location: Phone

contact

Last name: Docomo

First name: Ichiro

Saving location: docomo

account

Last name: Docomo

First name: Ichiro

Saving location: Google

account

(□□□@gmail.com)*

Last name: Docomo

First name: Ichiro

Saving location: Google

account

(△△△@gmail.com)*

Last name: Docomo

First name: Ichiro

Contacts are registered turning over the last name

and first name.

Last name: Docomo

First name: Ichiro

Last name: Ichiro

First name: Docomo

The last name and first name are registered in the

same field, or only the last names or first names are

registered in contacts.

Last name: Docomo

First name: Ichiro

Last name: Docomo

Ichiro

First name:

Different last names/first names are registered

under the same reading (only when Select

language is set to 日本語 (Japanese)).

Last name:

ドコモ (Docomo)

First name: 一郎 (Ichiro)

Last name (reading):

どこも

First name (reading):

いちろう

Last name:

土戸茂 (Docomo)

First name:

伊知朗 (Ichiro)

Last name (reading):

どこも

First name (reading):

いちろう

Continued on next page

SO-02C_E_TA.book 64 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

❖Information

･If last names/first names are registered in the

following conditions, the contacts are also

automatically linked.

- Two-byte hiragana/two-byte katakana/one-byte

katakana

- Upper case/Lower case of alphabets

- The same characters with or without accent

marks or phonetic symbols

■ Conditions not automatically linked

Contacts with the same last name/first name

but registered in the same saving location are

not automatically linked.

Examples:

Deleting contacts

1From the Home screen, tap ,

then tap [Contacts].

2Press t, then tap [Delete

contacts].

3Mark the contacts you want to

delete.

･If you want to delete all contacts, tap

[Mark all].

4Tap [Delete] X [OK].

❖Information

･You can also delete the contacts by touching and

holding a contact on the Contacts screen, then

tapping [Delete contact].

The last names/first names are the same as the

reading of last names/first names (only when Select

language is set to 日本語 (Japanese)).

Last name:

ドコモ (Docomo)

First name: 一郎 (Ichiro)

Last name (reading):

どこも

First name (reading):

いちろう

Last name: どこも

First name: いちろう

Last names/first names are not registered but the

identical phone numbers or mail addresses are

registered (similar last names/first names may be

linked)

Last name:

ドコモ (Docomo)

First name: 一郎 (Ichiro)

Phone number:

090△△△△△△△△

Last name:

First name:

Phone number:

090△△△△△△△△

Saving location: Phone

contact

Last name: Docomo

First name: Ichiro

Saving location: Phone

contact

Last name: Docomo

First name: Ichiro

SO-02C_E_TA.book 65 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

Calling a contact

1From the Home screen, tap ,

then tap [Contacts].

2Tap a name of contact to call to.

3Tap a desired phone number.

Checking Myself and editing

contact information

1From the Home screen, tap ,

then tap [Contacts].

2Tap [XXX-XXXX-XXXX]

(My number) at the top of the

contact list.

3Tap [Edit].

･The "Myself" edit screen appears.

4Enter the new information or make

the changes you want.

･By tapping (Add field) on the

editing screen, you can add

information to enter.

5When you are done, tap [Done].

❖Information

･In "Myself", you can add multiple phone numbers,

emails, etc. The history of dialed/received calls

from the registered phone numbers is displayed in

"Call log" of "Info" filter screen (P.68).

Sending your contact via

Bluetooth/Email/Gmail

You can send the saved contacts or "Myself"

information by using Bluetooth function

(P.149), email attachment, etc.

1From the Home screen, tap ,

then tap [Contacts].

2Tap [XXX-XXXX-XXXX]

(My number) or the contact.

3Press t, then tap [Send

contact].

4On the send confirmation screen,

tap [OK].

■Using Bluetooth function

Tap [Bluetooth] X [Turn on] X Select a

destination device from the list.

･Bluetooth function is ON and

searches destination devices.

･When Bluetooth function is already

ON, Bluetooth terminal scan screen

appears.

Continued on next page

SO-02C_E_TA.book 66 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

■Attaching contacts to Email/Gmail

Tap [Email]/[Gmail].

･Create an email on each compose

screen, and send it.

･"Email" appears when you have set an

email account. If you select "Gmail"

when you have not set an account,

setup wizard appears. You can create

and send email after settings are

done.

❖Information

･You can send multiple registered contacts all at

once.

- From the Home screen, tap X [Contacts],

press t and tap [Send contacts]. Mark the

checkboxes for the contacts you want to send

and tap [Send]. If you want to mark all contacts,

tap [Mark all]. On the send confirmation screen,

tap [OK].

Marking a contact as a favorite

You can mark a contact as a favorite. The

favorite list provides quick access to the

contacts you have marked.

1From the Home screen, tap ,

then tap [Contacts].

2Touch and hold the contact you

want to mark.

3Tap [Add to Favorites].

❖Information

･You can also add the contacts to favorites by

tapping [Favorites] on "Info" filter screen (P.68).

･On the Contacts screen, tap [Favorites] to display

contacts registered to Favorites.

Setting a photo to a contact

1From the Home screen, tap ,

then tap [Contacts].

2Tap the contact.

3Tap [Edit].

4Tap .

5Tap [Gallery]/[Take new photo].

･Select [Gallery] to select a saved

photo and add it.

･Select [Take new photo] to shoot a

photo and save it.

6Tap [Done].

❖Information

･You can also set photo to a contact by the

following operation.

- From the Home screen, X Tap [Gallery] and

select an image to set. Tap [Menu] at the lower

right of the screen X [More] X [Set as]

X [Contact picture] and select a contact you

want to register to, and then tap [Save].

SO-02C_E_TA.book 67 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

When you are viewing a contact details

screen, you can flick the filter at the bottom of

the screen right or left to show the following

information.

Setting to display Facebook

updates on contacts

You can view the Facebook update

information if the contacts are linked to online

services such as Facebook.

1From the Home screen, tap ,

then tap [Contacts].

2Press t, tap [Settings] X

[Accounts & sync] X [Add

account].

3Tap [Facebook].

･For the first time to login to Facebook,

a message confirming if you agree or

not agree with the End user license

agreement appears.

4Enter account information and tap

[Login].

･After log in, the confirmation screen

for synchronizing contacts with

members appears. Tap Select any of

[Sync all]/[Sync with existing

contacts]/[Don't sync].

5Tap [Next] X [Finish].

❖Information

･To display Facebook filter in "Info" filter screen

(P.68), login to Facebook from Timescape to

refresh in Timescape.

You can export/import contacts from/to

microSD card or UIM. This is useful, for

example, when you want to transfer the

contact information to another phone.

❖Information

･You can also use a synchronization service for

synchronizing your contacts. For details, see "Data

synchronization" (P.99).

The contact information filter

Filter Information

Info Contact phone numbers, mail

addresses, addresses, Facebook

information, etc.

Facebook Facebook status updates for the

contact

･Appears if you have set Facebook

account in Timescape.

Messaging Message (SMS) conversations with

the contact

Calls Call history for the contact

Exporting/Importing contacts

Continued on next page

SO-02C_E_TA.book 68 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

･When contacts are imported to other mobile

phone, phone number type "Mobile:/M", "Work:/W"

or "Home:/H" may appear at the next to the name of

the contacts backed up from the FOMA terminal to

UIM. If there is no corresponding item, "/O" may

appear.

Exporting all contacts on microSD

card

1From the Home screen, tap ,

then tap [Contacts].

2Press t, then tap [Back up

contacts]. X [Memory card]

(microSD card).

3Tap [OK].

Importing contacts from microSD

card

1From the Home screen, tap ,

then tap [Contacts].

2Press t, then tap [Import

contacts]. X [Memory card]

(microSD card).

3Tap [docomo]/[Phone contact].

･When you set Google account etc., it

appears as an import destination.

4Select the vCard file to import.

･If there is only one file, vCard file

selection screen does not appear. The

file is imported immediately.

･If a file has multiple contacts, they are

imported all at once.

･If there are two or more vCard files,

tap any of [Import vCard file]/[Import

vCard files]/[Import all vCard files] to

select.

5Tap [OK].

❖Information

･Some part of data may not be imported or

exported depending on the contacts.

Exporting names and numbers on

UIM

1From the Home screen, tap ,

then tap [Contacts].

2Press t, then tap [Back up

contacts]. X [SIM card].

3Mark the contacts you want to

copy.

･If you want to mark all contacts, tap

[Mark all].

4Tap [Back up].

Continued on next page

SO-02C_E_TA.book 69 ページ２０１１年５月２４日　火曜日　午後２時３３分

Calling/Network Services

SO-02C Web_TA

5Tap [Add contacts]/[Replace all

contacts].

･If you select [Replace all contacts], all

existing UIM information is replaced.

❖Information

･When you copy a contact to the UIM, only the

contact name and the first number is saved. This is

due to limited memory on a UIM.

･Contacts without phone number cannot be saved

to the UIM.

Importing contacts from UIM

1From the Home screen, tap ,

then tap [Contacts].

2Press t, then tap [Import

contacts]. X [SIM card].

3Tap [docomo]/[Phone contact].

･When you set Google account etc., it

appears as an import destination.

4To import one contact, tap the

contact you want to import.

･To import all contacts, press t,

then tap [Import all].

･If there is a contact whose name is

matched with the imported contact,

the contact is imported as a

separated one.

❖Information

･Only a name and the first phone number can be

imported to a contact.

You can copy the Contacts data to or from

another FOMA terminal by using microSD

card. You can also copy the Contacts data

registered in Google account to docomo

account.

1From the Home screen, tap ,

then tap [PhoneBookCopy].

･For the first time of use, agree to "使用

許諾契約書 (License Agreement)".

Exporting contacts saved in

docomo account to microSD card

1On the "エクスポート (Export)" tab

screen, tap [ 開始 (Start)].

Importing contacts on microSD

card to docomo account

1On the "インポート (Import)" tab

screen, tap a file you want to

import.

2Tap [ 上書き (Overwrite)]/

[追加 (Add)].

Using PhoneBookCopy

SO-02C_E_TA.book 70 ページ２０１１年５月２４日　火曜日　午後２時３３分

Sony A3880112 GSM 850/900/1800/1900 GPRS / EDGE / UMTS FDD156 / HSUPA/HSDPA mobile phone with Bluetooth, WLAN 802.11bgn, GPS/A-GPS, FM Rx, ANT+ and RFID User Manual

Sony Mobile Communications Inc GSM 850/900/1800/1900 GPRS / EDGE / UMTS FDD156 / HSUPA/HSDPA mobile phone with Bluetooth, WLAN 802.11bgn, GPS/A-GPS, FM Rx, ANT+ and RFID

Contents

08 user manual part 1

Navigation menu

Namespaces

Views

Navigation