Sony A5880013 Mobile phone with Bluetooth, WLAN 802.11bgn, GPS/A-GPS, FM receiver and RFID User Manual 08
Sony Mobile Communications Inc Mobile phone with Bluetooth, WLAN 802.11bgn, GPS/A-GPS, FM receiver and RFID 08
Sony >
Contents
- 1. 08 user guide
- 2. 08 user manual
08 user manual
Illustrations and Screenshots in This Manual Notes on Cell Phone Use IS11S Basic Manual Contents Getting Ready Lerning the Basic Making and Answering Calls Global Function Character Input read this manual to master the cellular phone Phone Book Mail Camera Web Browser TV (1Seg) Applications Troubleshooting Index Introduction Thank you for purchasing the IS11S. Before using your IS11S, be sure to read the IS11S Basic Manual (this PDF manual) to ensure correct usage. After you have finished reading this manual, store this PDF manual and the printed manuals in safe places so you can retrieve them whenever you need them. Manuals for the IS11S There are three manuals for the IS11S: the Basic Manual, printed Instruction Manual (Japanese) and full Instruction Manual (Japanese). ● For learning the basics: Read the IS11S Basic Manual (this manual) or printed IS11S Instruction Manual (Japanese). ● For learning details of each function: The full Instruction Manual (Japanese) gives detailed instructions on using each function and can be downloaded from the au homepage: http://www.au.kddi.com/torisetsu/index.html To ensure proper usage of the IS11S, be sure to read the Safety Precautions "安全上のご注意" in the Instruction Manual. The keyword searchable au Online Manual is also available on the au homepage: http://www.au.kddi.com/manual/index.html Scan this QR code to access the au Online Manual. ▶ Illustrations and Screenshots in This Manual Illustrations and Screenshots in This Manual ■ Note on Illustrations The illustrations in this manual may look different from the actual cell phone in shape, color and typeface. ■ Note on Screenshots The screenshots in this manual are simplified and may look different from the actual cell phone screens. Notes on Cell Phone Use Notes on Cell Phone Use Cell Phone Etiquette The cell phone always emits weak radio waves when power is on. Use the cell phone in an enjoyable and safe manner without forgetting to be considerate of others around you. ● Use of cell phones is not allowed in some places. • Do not use the cell phone while you are driving. Doing so is both dangerous and prohibited by law. • Using a cell phone in an aircraft is prohibited by law. Set Airplane Mode to ON and turn the cell phone power off. ● Radio waves from cell phones may interfere with medical electrical equipment. • Some people close to you in crowded places such as packed trains may be using a cardiac pacemaker. Turn the cell phone off in such places. • Abide by the rules of hospitals and other medical institutions where it is forbidden to use or carry cell phones. ● Be considerate of where you use the cell phone and how loudly you talk. • Do not make calls in theaters, museums, libraries, and other similar places. Turn power off or turn on manner mode not to disturb others around you by ring tones. • Do not use the cell phone on a street where you might interrupt the flow of pedestrians. • Move to areas where you will not inconvenience others on trains or in hotel lobbies. • Refrain from talking in a loud voice. • Obtain the permission of other people before you take their photos with the cell phone's camera. • Do not record information with the cell phone's camera in bookstores and other locations where taking photos is not permitted. Do Not Use the Cell Phone While Driving! Turn off your cell phone or put it in Drive Mode while driving. Do not use the cell phone while driving a car/motorcycle or riding a bicycle. It may result in a traffic accident. Using a cell phone while driving is prohibited by law. Using a cell phone while riding a bicycle may also be punishable by law. Prohibited! • Looking at a cell phone display • Talking on a cell phone while holding it Drive Mode In Drive Mode, a Japanese message meaning "I am driving right now. Please leave your name and message after the beep." is played when a call is received, and asks the caller to leave a message on the answer memo. , use When the standby screen is displayed, press to select Drive, and then press (Set). Making and Answering Calls Contents Introduction Illustrations and Screenshots in This Manual 1 Cell Phone Etiquette..................................................... 2 Do Not Use the Cell Phone While Driving! ................... 2 Contents Getting Ready Checking the Contents of the Box ................................ 5 Names of Parts............................................................. 6 Charging the Battery Pack............................................ 7 Turning On Power ......................................................... 8 Switching the Display Language to English.................. 8 Initial Setup................................................................... 8 Checking Your Phone Number...................................... 8 Inserting/Removing microSD Memory Card................. 9 Security Code and Passwords ..................................... 9 Learning the Basics 10 Operating the Touch Panel ......................................... 10 Viewing the Home Screen .......................................... 11 Using the Application Screen ..................................... 12 Opening the Applications screen................................ 12 Global Function Contents Notes on Cell Phone Use 13 Making a Call.............................................................. 13 Making an International Call ....................................... 13 Answering a Call ........................................................ 14 Returning a Call (Outgoing History/Incoming History) .......................... 14 One-ring Calls ............................................................ 14 Adjusting the Earpiece Volume during a Call ............. 15 Turning On Manner Mode........................................... 15 Changing the Incoming Ring Tone ............................. 15 Adjusting the Incoming Ring Tone Volume ................. 16 17 Setting the Area.......................................................... 17 Obtaining the Latest PRL (Preferred Roaming List) ... 17 Calling Japan from Overseas ..................................... 18 Character Input 19 Character Entry Modes .............................................. 19 Entering Alphanumeric Characters ............................ 19 Entering E-mail Addresses ......................................... 20 Entering Pictograms/Decoration Pictures/Symbols/ Face marks ................................................................. 21 Phone Book 22 Saving a Phone Book Entry ....................................... 22 Dialing from the Phone Book...................................... 22 Editing Phone Book Entries........................................ 22 Saving a Phone Number from the Incoming or Outgoing History ........................................................ 23 Mail 24 Contents Using C-mail ............................................................... 24 Creating and Sending C-mail Messages .................... 24 Reading Received C-mail Messages ......................... 24 Using PC-mail ............................................................ 25 Using Gmail ................................................................ 25 Camera 26 Photo Taking Tips ....................................................... 26 About Photo Modes .................................................... 26 Taking a Photo............................................................ 27 Viewing Photos (Gallary) ............................................ 27 Web Browser 28 Viewing Sites with Web Browser ................................ 28 Using Bookmarks/History ........................................... 28 TV (1Seg) 29 Initial Setup of the TV ................................................. 30 Watching TV (1Seg) ................................................... 30 Basic Operations ........................................................ 31 Exiting the TV ............................................................. 31 Applications 32 Using Android Market ................................................. 32 Managing Applications ............................................... 32 Troubleshooting 33 Index 35 Radio Wave Exposure and Specific Absorption Rate (SAR) Information 38 Radio Frequency (RF) exposure and Specific Absorption Rate (SAR) ................................. 39 Guidelines for Safe and Efficient Use ......................... 40 FCC Statement for the USA ....................................... 43 Industry Canada Statement ....................................... 44 Declaration of Conformity for CDMA SOI11 ............... 45 End User Licence Agreement 46 About Open Source Software 47 Getting Ready Checking the Contents of the Box The box contains the cell phone and accessories. • Cell phone • Battery pack Getting Ready • Instruction Manual (Japanese) • Warranty (Japanese) • Safety Precautions (Japanese) • An AC adapter and microSD™ memory card are not included. Purchase a specified AC adapter (sold separately) and a commercially available microSD™ memory card. Names of Parts ■ From the Front Getting Ready ■ From the Back ■ From the Sides Charging the Battery Pack The battery pack is not fully charged at the time of purchase. Be sure to charge the battery pack before using the cell phone for the first time. • An AC adapter is not included. Purchase a specified AC adapter (sold separately). • Open the cover of the microSD memory card slot/ external connecting terminal. Check the shape of the connector of the AC adapter, and plug it straight into the external connecting terminal. ➡ Unfold the power plug of the AC adapter and plug it into a 100 V AC power outlet. Getting Ready microUSB plug ➡ Connect a specified AC adapter to the cell phone with the battery pack attached. ➡ Confirm that the charge indicator lights. Notification LED • Charging: The charge indicator lights. • Charging finished: The charge indicator goes out. • Be sure to close the cover of the microSD memory card slot/external connecting terminal when charging is finished. • Do not pull or twist the cover of the microSD memory card slot/external connecting terminal forcibly. • Be sure to use the common AC adapter 02 (sold separately) when charging overseas. AC Adapter USB plug microUSB cable Turning On Power Initial Setup Hold down F for at least one second. • You cannot receive or make calls if indicator) is displayed. (out of range ■ Turning Off Power Getting Ready When the standby screen is displayed, hold down F for at least one second. Switching the Display Language to English When the standby screen is displayed, press L. ➡ Press c (OK). After a short while, your e-mail address is displayed. ➡ Press c (OK). The initial settings are complete. • You can also configure initial settings by pressing or . You can switch the display language for function names and other items to English. Checking Your Phone Number When the standby screen is displayed, press c. When the standby screen is displayed, press c and then 0. ➡ Use a to select 機能/設定 (Func/Settings) and then press c (選択 [Select]). ➡ Use j to select 画面表示 (Screen Display) and then press c (選択 [Select]). ➡ Use j to select Set Language and then press c (選択 [Select]). ➡ Use j to select English and then press c (Set). Before use, you need to configure initial settings. Your email address is assigned automatically in the initial setup. Inserting/Removing microSD Memory Card You can use microSD card for any other compatible devices. • When a microSD card is not inserted,camera functions, playing or downloading music or videos are not available. ■ Lock No. Usage Example Changing various settings of the cell phone Initial Setting 1234 Getting Ready Security Code and Passwords You can use a security code and other passwords described below. Take care not to forget your security code and passwords, because they are required for performing various operations and using subscription services. ■ Security Code Usage Example ①Using the Answering Service (Voice Mail) and Call Transfer remotely from a fixed-line phone ②Making inquiries, applications, and changes while using au Customer Service Center voice guidance, au web pages. ③Changing the settings of Mail Filter or Other under E-mail Setup Initial Setting The four-digit number you wrote on your subscription form Learning the Basics Operating the Touch Panel Drag Touch and hold down to trace on the screen and then release your finger. You can operate IS11S by directly touching the screen. ■ Basic Operations Learning the Basics 10 Tap Gently touch an item or button and then immediately release your finger. Long Touch Keep touching an item or button. Slide While your finger is gently touching an item, drag it to the desired position. Flick Operate the screen by quickly moving (flicking) your finger up, down, right, or left. Note that the following operations may cause malfunction or scratch the screen. • Operation with sharp objects such as a ballpoint pen and a pencil • Operation with wet fingers • Operation when the display is wet with drops of water • Operation while your hand or an object is touching the area surrounding the display • Operation in which the display is pressed hard • Operation while a sticker or sheet (commercially available protective sheet, privacy screen sticker, etc.) is stuck on the display • Operation with a finger when you are wearing gloves or operation with a fingernail • Operation while foreign matter is on the display * If the display is wet, wipe drops with a soft cloth before use. Operating when the display is dirt or wet with sweat or water may result malfunction. In such a case, press to return to the standby screen and clean the display before use. When flicking, make sure to operate inside of the screen. When the screen turns off, touch panel operation becomes disabled. Viewing the Home Screen Display indicators inform you of mail arrival, current settings, etc. ■ Display ① ③ ⑤ ② ④ Indicator ⑨⑩ ② Battery level ⑫ Ticker field Wi-Fi WIN connection status ⑬ Search window Overseas (CDMA)/(GSM) mode set ⑭ Info pane ⑮ Notification icon ⑯ Shortcut menu During a call ⑰ Auto Lock or Remote Ctrl Lock activated au Media Tuner activated ⑱ Manner mode set ⑨ Missed calls ⑲ Answer memo or manner mode set ⑩ New or unread e-mail/ C-mail ⑬ ④ ⑤ ⑱⑲ Packet communication available A microSD™ memory card (sold separately) inserted Learning the Basics Current date and time ③ ⑰ Description ⑪ ⑫ ⑮ ⑯ Indicator Signal strength ⑪ ⑭ Description ① • The date and time are set automatically. However, auto time adjustment is invalid when Area Setting is set to overseas mode. Set the date and time manually under M541 Auto Time Adj. 11 Using the Application Screen You can access the applications installed in IS11S using the Applications screen. Opening the Applications screen ➡ From the Home screen, tap the applications bar. Learning the Basics 12 Making and Answering Calls Making a Call When the standby screen is displayed, use 0 to 9 to enter a phone number. • When calling to a fixed-line phone, you also need to enter the area code. ➡ Press N. • After you enter a phone number, you can add 184 or 186 to the phone number as follows: ➡ Press (Call). to select Add Special No. and then press ➡ Use (OK). ➡ Use to select 184 or 186 and then press (Add). 184: When you do not want to inform the other party of your phone number. 186: When you want to inform the other party of your phone number. ■ 001 International Call Service Available without any additional application. Example: To call 212-123-△△△△ in the USA Enter the access code, a country code, area code and phone number, and then press N. 001010 ↑ KDDI international access code ↑ Country code (USA) 212 ↑ Area code 123-XXXX ↑ Phone number • International call charges are billed together with monthly local call charges. • For more information on 001 International Call Service, dial either of the following numbers: From au cell phones (toll-free): 157 (area code not required) From fixed-line phones (toll-free): 0077-7-111 (Open 9:00 to 20:00 everyday) Making and Answering Calls • To end the call, press F. Making an International Call 13 Answering a Call To answer a call, press N. Making and Answering Calls 14 Returning a Call (Outgoing History/ Incoming History) • To end the call, press F. Example: Returning a call to a phone number in the incoming history ■ Display When a Call is Received When the standby screen is displayed, press l. The phone number of the caller appears. If the caller's phone number and name are in the phone book, the name is also displayed. When the phone number of the caller is not displayed, one of the following indicators may appear. • Press r while the standby screen is displayed to display the Outgoing History screen. Indicator Meaning ID Unsent The caller did not send a Caller ID. Payphone The call is from a pay phone. Not support The call is from a phone that does not support Caller ID. ■ Missed Call Notification If you did not answer a call, and Missed Call are displayed to let you know that you missed a call. To check the caller's phone number, use d to select Missed Call and then press c (Select). You can then return the call (see the procedure on the right). ➡ Use j to select the phone number you want to call and then press c (Detail). • Press r to display the Outgoing History screen. ➡ Press N. • The cell phone can store up to 50 phone numbers in each of the incoming and outgoing history. One-ring Calls ■ What is a One-ring Call? A one-ring call is a call from an unknown caller that only rings once, causing it to be stored in the incoming history. One-ring calls are often used to get you to return the call, which will connect you to a dating service or some other service that charges you at high rates. ■ One-ring Indicator indicator (red) on the Incoming History screen indicates you have received a one-ring call (a call rang for three seconds or shorter). Be careful when you return a call to an unknown caller. Adjusting the Earpiece Volume during a Call • Even in manner mode, the cell phone still emits a sound when autofocusing, a shutter sound when you take a photo. Changing the Incoming Ring Tone When the standby screen is displayed, press c. • u: Increases the volume. • d: Decreases the volume. ➡ Use j to select Sound/Vib/Lamp and then press c (Select). ➡ Press c (OK). ➡ Use j to select Incoming Setup and then press c (Select). Turning On Manner Mode When the standby screen is displayed, hold down ( for at least one second. This turns on manner mode, and displays , and on the standby screen. This also turns on Answer memo, on the standby screen. which is indicated by ■ Turning Off Manner Mode When the standby screen is displayed, hold down ( for at least one second. , and to disappear Turning off manner mode causes from the standby screen. Answer memo is also turned off, disappearing from the standby which is indicated by screen. ➡ Use j to select Incoming Call and then press c (Select). ➡ Use j to select c (Select). (Ringtone) and then press ➡ Use j to select Original and then press c (Select). ➡ Use j to select a ring tone and then press c (Set). Making and Answering Calls During a call, use j. ➡ Use a to select Func/Settings and then press c (Select). The incoming ring tone is set. • If you press & (Play), the tone plays. ➡ Press % (OK). 15 Adjusting the Incoming Ring Tone Volume When the standby screen is displayed, press c. ➡ Use a to select Func/Settings and then press c (Select). ➡ Use j to select Sound/Vib/Lamp and then press c (Select). Making and Answering Calls ➡ Use j to select Incoming Setup and then press c (Select). ➡ Use j to select Incoming Call and then press c (Select). ➡ Use j to select (Ringtone Volume) and then press c (Select). ➡ Use j to adjust the volume and then press c (Set). • Each press of j changes the volume one step. STEP ↑ The ring tone volume gradually increases. STEP ↓ The ring tone volume gradually decreases. Level5 ↑ Level3 ↓ Level1 OFF 16 The ring tone sounds at the set volume. The ring tone does not sound. ➡ Press % (OK). Global Function The IS11S supports Global Passport CDMA/GSM services. You can use your IS11S overseas without any additional application. Setting the Area Example: Setting to Overseas (Auto) mode When the standby screen is displayed, press c. ➡ Use a to select Global Function and then press c (Select). ➡ Check the precautions and then press c (OK). ➡ Use j to select Area Setting and then press c (Select). ➡ Use j to select Overseas (Auto) and then press c (Select). ➡ Use j to select YES and then press c (OK). • Some functions are not available when Area Setting is not set to Japan. Manually update and set the PRL (preferred roaming list) before traveling abroad. When the standby screen is displayed, press c. ➡ Use a to select Global Function and then press c (Select). Precautions are displayed. ➡ Check the precautions and then press c (OK). ➡ Use j to select PRL Setting and then press c (Select). ➡ Use j to select PRL Manual Update and then press c (Select). The cell phone connects to the server. ➡ Use j to select PRLダウンロード (Download PRL) and then press c (ダウンロード [Download]). Global Function Precautions are displayed. Obtaining the Latest PRL (Preferred Roaming List) ➡ Use j to select 最新ファイルはこちら (The Latest PRL) and then press c (Select). ➡ Press c (OK). The latest PRL is downloaded. • The PRL (preferred roaming list) is the area information of overseas carriers offering international roaming service in partnership with KDDI (au). 17 Calling Japan from Overseas When the standby screen is displayed, use 0 to 9 to enter a phone number. ➡ Press c (Call). ➡ Use j to select Voice Call and then press c (OK). ➡ Use j to select Call to Japan and then press c (OK). ➡ Press c (Call). Global Function 18 • When you make an international call from Japan to a Global Passport CDMA/GSM-compatible cell phone, you can do it in the same way as making domestic calls within Japan. Character Input Number of Times to Press the Key Key When a character entry screen is displayed, you can select a character entry mode if you press & (ChrTyp). ■ Menu Items 漢 : Kanji conversion mode カ : Double-byte katakana mode カナ : Single-byte katakana mode A : Double-byte alphanumeric mode aA : Single-byte alphanumeric mode 1 : Double-byte number mode 12 : Single-byte number mode M N W X • Each time you press (ChrTyp), the character entry mode changes in following order: Alphanumeric → Number → Kanji conversion → Katakana → Alphanumeric... • The character entry mode that you can select is different depending on the current character entry screen. Entering Alphanumeric Characters 0 Space 0 10 11 12 ’ ! Inputs symbols Inputs symbols (switches an unconfirmed * character between uppercase and lowercase). Adds a line break (displays an unconfirmed # character in the opposite order). Character Input Character Entry Modes When you change your e-mail address, you cannot use the characters in ■ for the account name (part of the address to the left of @). You can use the keys 1 to 0 to enter characters. More than one character is assigned to each key. The following table shows the key assignment for entering characters. 19 ■ Entering Two or More Characters Assigned to the Same Key After you enter the first character, press r and then enter the next character. ■ Deleting Characters To delete one character at a time, move the cursor to the character you want to delete and then press C. To delete all characters to the right of the cursor, hold down C for at least one second. If there are no characters to the right of the cursor, holding down C for at least one second will delete all the characters. Character Input ■ Starting a New Line Press #. • Certain functions such as C-mail do not support entering new lines. Entering E-mail Addresses ■ E-mail Address Compatible Characters • Before you enter an e-mail address, switch to the Singlebyte alphanumeric mode. • When changing your e-mail address, you can enter up to 64 single-byte alphanumeric and symbol characters for the account name (part to the left of @). Note the following: - Uppercase characters cannot be used. - Period (.) or zero (0) cannot be used as the first character. ■ How to Enter E-mail Addresses Example: Entering "taro.23@kddi.co.jp" Enter "taro.23". t: a: r: o: .: 2: 3: Press 8 once. Press 2 once. Press 7 three times. Press 6 three times. Press 1 once. Press 2 once and then #. Press 3 once and then #. ➡ Enter "@". @: Press 1 twice. ➡ Enter "kddi" and then press c (OK). 20 k: d: d: i: Press 5 twice. Press 3 once and then r. Press 3 once. Press 4 three times. ➡ Press % (SubMenu). ➡ Use j to select Phrase and then press c (OK). ➡ Use j to select Internet and then press c (Select). ➡ Use j to select .co.jp and then press c (Select). ".co.jp" is entered. Entering Pictograms/Decoration Pictures/Symbols/Face marks Example: Entering pictograms ➡ Use a to select the pictogram you want to enter and then press c (OK). • You can enter pictograms consecutively if you press % (Repeat) instead of c (OK). Character Input When a character entry screen is displayed, press R. in the character entry screen, • Each time you press the character entry mode changes in following order: Pictograms → Decoration-Emojis → Decoration pictures → Symbols → Face marks... • You can switch categories of pictograms, decoration/ on each emojis or face marks by pressing selection screen. 21 Phone Book Saving a Phone Book Entry When the standby screen is displayed, hold down & for at least one second. ➡ Use j to select c (Select). [Name] and then press Dialing from the Phone Book ➡ Enter a name and then press c (OK). The [Reading] for the name is entered automatically. ➡ Use j to select press c (Select). [Phone No.1] and then ➡ Enter a phone number and then press c (OK). Phone Book • If the phone number is for a fixed-line phone, enter the phone number starting with the area code. ➡ Use j to select a phone number type and then press c (Select). • Follow the next step to enter an e-mail address. If you do not want to enter an e-mail address, press % (Reg). ➡ Use j to select press c (Select). [E-mail Address1] and then ➡ Enter an e-mail address and then press c (OK). ➡ Use j to select an e-mail address type and then press c (Select). 22 ➡ Press % (Reg). • The phone book can store up to 1,000 entries. • The cell phone automatically saves an entry to the lowest available memory number from 000 to 999. • You can save five phone numbers and five e-mail addresses for each phone book entry. • You can also assign a group No., and enter birthday, address, and other information. When the standby screen is displayed, press &. ➡ Use a to select the entry containing the phone number you want to dial and then press c (Detail). ➡ Use j to select the phone number and then press c (Select). ➡ Use j to select Voice Call and then press c (OK). Editing Phone Book Entries When the standby screen is displayed, press &. ➡ Select an entry and press c (Detail). ➡ Press & (Edit). ➡ Edit the contents and then press % (Reg). ➡ Use j to select Overwrite and then press c (OK). Saving a Phone Number from the Incoming or Outgoing History Example: Saving a phone number from the incoming history to the phone book When the standby screen is displayed, press l and use j to select the phone number you want to save. ➡ Press % (SubMenu). ➡ Use j to select Reg to Adrs Book and then press c (OK). ➡ Use j to select Register New and then press c (Select). • For details on saving a phone book entry, see page 27. Phone Book ➡ Use j to select a phone number type and then press c (Select). 23 ➡ Use j to select Quote Adrs Book and then press c (OK). Mail Using C-mail C-mail is a service that uses phone numbers as addresses to exchange messages between au cell phones that support C-mail. A C-mail message can contain up to 50 double-byte (or 100 single-byte) characters. ➡ Use a to select a phone book entry and then press c (Detail). ➡ Use j to select a phone number and then press c (Select). ➡ Press & (Send). • The C-mail send charge applies when sending C-mail. Reading Received C-mail Messages ■ C-mail Safety Block C-mail safety block is a function that allows you to reject C-mails that include URLs (http://△△△, https://△△△) or phone numbers in the C-mail message text. C-mail safety block is valid by default. Cancel the setting if you want to receive C-mails that include URLs and phone numbers in the message text. Mail Creating and Sending C-mail Messages When the standby screen is displayed, hold down L for at least one second. ➡ Use j to select Create New and then press c (Select). ➡ Enter text and then press c (OK). ➡ Use j to select c (Edit). 24 [Address] and then press When you receive a C-mail message, C-mail appears on the standby screen. ➡ Use d to select C-mail and then press c (Select). ➡ Press c (Select). • • : Indicates a read message. : Indicates an unread message. ➡ Use j to select the new message and then press c (View). ■ Reading a C-mail Message from the C-mail Menu When the standby screen is displayed, hold down L for at least one second to display the C-mail menu, use j to select Inbox and then press c (Select). For subsequent operations, see "Reading Received C-mail Messages" above. Using PC-mail ➡ Tap the email. You can create an Email account provided by au one mail or general service provider, and use Email. Using Gmail ■ Registering another PC-mail account If you enter your account settings in the Email setup wizard, you can view your emails up to 11 accounts by Timescape. ■ Sending PC-mail Messages If you have a Google account, you can send/receive emails by using Gmail on your IS11S. • Gmail messages are not displayed in Timescape. ➡ From the Home screen, tap the applications bar, then tap [Gmail]. ➡ On the inbox, press menu and tap [Refresh]. ➡ From the Home screen, tap the applications bar, then tap [Email]. ➡ Press menu, then tap [Compose]. ➡ Enter the email address of the recipient. ➡ Enter a subject. ➡ To attach a file, press menu, then tap [Add attachment] and select a file. Mail ➡ Enter a message text. ➡ Tap [Send]. ■ Receiving PC-mail Messages ➡ From the Home screen, tap the applications bar, then tap [Email]. ➡ To update the inbox with new messages, press menu, then tap [Refresh]. 25 Camera Your cell phone has a CMOS camera with 16.2 effective megapixels for shooting photos and movies. You can use the self-timer and autofocus. Shot images can be used for the standby screen, and attached to e-mail messages. Photo Taking Tips When taking photos, frame the subject within the display and hold the cell phone steady to avoid shaking. About Photo Modes The following modes are available for taking photos. W.paper (F.Wide) is set for W.paper mode and 16M is set for DSC mode at the time of purchase. Mode Photo Size W.paper W.paper (Normal) mode W.paper (F.Wide) Storage Location The Photo Folder in the Data Folder of the cell phone 0.3M 2M (Wide) DSC mode 3M 8M 12M (Wide) The DSC Folder in the Data Folder of a microSD™ memory card (sold separately)* 16M * When a microSD™ memory card (sold separately) is not inserted, the files are saved to the Data Folder of the cell phone. Camera 26 Taking a Photo When the standby screen is displayed, hold down ) for at least one second. The monitor screen appears. ➡ Point the AF frame at the subject and then tap or press). The shutter clicks, photos are saved in the Data Folder of the cell phone or a microSD memory card. Photo Viewer • Photo Viewer allows you to playback recorded pictures a short time later or to view an image list. • Tap or press to start Photo Viewer. Viewing Photos (Gallary) When the standby screen is displayed, press c. ➡ Use j to select Photo Folder and then press c (Select). ➡ Use j to select a folder and then press c (Select). Camera ➡ Use a to select Data Folder and then press c (Select). ➡ Use a to select the photo you want to view and then press c (Select). 27 Web Browser Viewing Sites with Web Browser The web browser offers advanced features that let you view web pages like on a PC. You can open up to 8 browser windows. You can easily switch from one website to another by opening several windows. Using Bookmarks/History You can check history and store as many bookmarks on the IS11S as you want. Web Browser 28 TV (1Seg) "1Seg", a mobile terrestrial digital television service in Japan, is available on the IS11S. • The continuous viewing times of TV (1Seg) are as follows. The figures vary according to the usage of data broadcasts. ■ Using the TV Antenna When watching TV (1Seg), do not cover the TV antenna part with your hands to ensure good reception. Using earphones DBEX ON: Approx. 4 hrs. DBEX OFF: Approx. 4 hrs. Using the speaker DBEX ON: Approx. 4 hrs. DBEX OFF: Approx. 4 hrs. Continuous viewing time • For information about the "1Seg" service, refer to the following homepage. The Association for Promotion of Digital Broadcasting. From a PC http://www.dpa.or.jp/ From a cell phone http://www.dpa.or.jp/1seg/k/ TV (1Seg) • If you are watching TV indoors, you may be able to improve the reception by moving closer to a window. 29 Initial Setup of the TV Watching TV (1Seg) To watch TV (1Seg) using the au Media Tuner, you need to configure initial settings. When the standby screen is displayed, hold down g for at least one second. When the standby screen is displayed, hold down g for at least one second. Disclaimer notes are displayed. ➡ Use j to check the disclaimer notes, use j to select OK, and then press c (選択 [Select]). The initial setting screen for using the au Media Tuner is displayed. • Follow the on-screen instructions to configure each setting. Then, the screen for setting TV (1Seg) channels appears. TV (1Seg) 30 ➡ Use j to select オート設定(放送波) (Auto (Broadcasting wave)) and then press c (選択 [Select]). Automatic channel scanning begins. When receivable channels are found, the channel setup is completed. • Select マニュアル設定 (Manual) to set the channel manually. ■ To Change Channels Use s to change channels. You can select TV (1Seg). TV (1Seg) Change channels one by one. 1ch 2ch … 12ch • Before using this feature, you must configure au Media Tuner initial settings (see the procedure on the left). • Channels cannot be changed with when the data operation screen is displayed. Basic Operations Launch TV (1Seg) to start receiving data broadcasts. The data operation screen appears when a data broadcast is received. Press & (Vol/Ch) on the data operation screen to switch to the TV operation screen. On the TV operation screen, pressing N switches the display. Data operation screen TV operation screen & (Vol/Ch) & (戻る[Return]) to adjust the Exiting the TV TV (1Seg) • On the TV operation screen, use volume. Press F, use j to select はい (YES) and then press c (OK). 31 Applications Using Android Market By using Android Market, you can access to useful applications or fun games directly which you can download and install on IS11S. And you can send feedback and comments about an application, or report objectionable application or incompatible application with IS11S as an inappropriate content. • To use Android Market, you need to set Google account. Managing Applications You can display installed applications on the screen or adjust settings. Many applications contain wizards for supporting the installation. Applications 32 Troubleshooting Symptom Possible Cause Remedy Page Charge the battery pack. ● Did you hold down F for at least one second? Hold down F for at least one second. 12 ● Is power turned on? Hold down F for at least one second. 12 ● Is Move to a location where (out of range indicator) is no longer displayed, and try again. Also check the Area Setting. 12,22 ● Is your hand or a metal object covering the area around the built-in antenna? Make sure your hand or any other metal object is not covering the area around the built-in antenna. ● Did you enter the phone number starting with the area code? When making a call to a phone other than a cell phone, you need to enter the area code even if you are inside the same area. 17 ● Is Move to a location where (out of range indicator) is no longer displayed. Also check the Area Setting. 12,22 ● Is power turned on? Hold down F for at least one second. 12 No response when a key is pressed. ● Is power turned on? Hold down F for at least one second. 12 Touch panel operation is disabled. ● Is the display turned off? When the display is turned off, touch panel operation is deactivated. Press any key to activate touch panel operation. 10 Charge the battery pack. Cannot turn on power. Cannot make calls. Cannot receive calls. (out of range indicator) displayed? (out of range indicator) displayed? A warning tone sounds ● Is there enough power left in the battery and power turns off. pack? Troubleshooting ● Is the battery pack charged? 33 Symptom Troubleshooting 34 Remedy Page ● Is Answer memo turned on? Hold down C for at least one second to turn off Answer memo. 20 ● Is the earpiece volume too low? Press u during a call to increase the earpiece volume. 19 When making a call, a beeping sound is heard from the earpiece and a connection cannot be established. ● Is (out of range indicator) displayed? Or are you in a location where the signal is too weak? (out of range Move to a location where indicator) is no longer displayed. Also check the Area Setting. ● Is the wireless line busy or is the phone you are calling on another line? End the call and try again later. 17 The incoming indicator flashes but the ring tone does not play. ● Is manner mode turned on? Hold down ( for at least one second to turn off manner mode. 19 ● Is Increase the volume of the incoming call ring tone. 20 Calls are answered automatically. Cannot hear the other party. Cannot charge the battery pack. When the camera is activated, no subject is displayed. Possible Cause (ring tone off indicator) displayed? ● Is the battery pack installed properly? Install the battery pack properly. ● Are the plug and connector of the AC adapter inserted properly? Insert the plug and connector firmly. ● Is a finger or other object covering the lens (camera)? Check the position of the lens (camera) and remove the obstacle. • For more detailed information, visit the following au troubleshooting sites: - From a PC: http://www.kddi.com/customer/service/au/trouble/kosho/index.html 12,22 Index Charging the battery pack …………………………………… 7 Contents………………………………………………………… 3 Numeric 1Seg ………………………………………………………… 29 Display …………………………………………………… 6,11 Accessories …………………………………………………… 5 E-mail Initial settings ………………………………………………… 8 E-mail address ………………………………………………… 8 Available characters ……………………………………… 19 Entering …………………………………………………… 20 Earpiece volume …………………………………………… 15 Entering pictograms/decoration pictures/ symbols/face marks ………………………………………… 21 Battery level ………………………………………………… 11 Battery pack ………………………………………………… 5,7 Battery pack cover …………………………………………… 6 Global Function……………………………………………… Calling Japan from Overseas …………………………… Obtaining the Latest PRL (Preferred Roaming List) … Setting the Area …………………………………………… 17 18 17 17 Incoming history …………………………………………… 14 Indicators …………………………………………………… 11 Initial settings …………………………………………… 8,30 TV (1Seg) ………………………………………………… 30 International Call …………………………………………… 13 Index C-mail ………………………………………………………… 24 C-mail safety block ……………………………………… 24 Creating and sending …………………………………… 24 Reading …………………………………………………… 24 Received mail …………………………………………… 24 Camera ……………………………………………………… 26 Photo taking tips ………………………………………… 26 Taking a photo …………………………………………… 27 Cell phone etiquette …………………………………………… 2 Character input ……………………………………………… 19 Character entry modes…………………………………… 19 Deleting characters ……………………………………… 20 Entering characters from the same key ………………… 20 Starting a new line ………………………………………… 20 35 L Language ……………………………………………………… 8 Lock No. ………………………………………………………… 9 Mail …………………………………………………………… C-mail ……………………………………………………… Main menu …………………………………………………… Manner mode ……………………………………………… 24 24 12 15 Names of parts ………………………………………………… 6 Ringtones Changing the type………………………………………… 15 Changing the volume …………………………………… 16 One-ring calls ……………………………………………… 14 Outgoing history …………………………………………… 14 Security code ………………………………………………… 9 Signal strength ……………………………………………… 11 Passwords ……………………………………………………… 9 Phone (call) ………………………………………………… 13 184/186 …………………………………………………… 13 Answering ………………………………………………… 14 International Call ………………………………………… 13 Making……………………………………………………… 13 Returning ………………………………………………… 14 Phone book ………………………………………………… 22 Dialing ……………………………………………………… 22 Editing ……………………………………………………… 22 Touch Panel ………………………………………………… 10 Basic operations ………………………………………… 10 Troubleshooting …………………………………………… 33 Turning on/off power ………………………………………… 8 TV (1Seg) …………………………………………………… 29 Antenna …………………………………………………… 29 Basic operations ………………………………………… 31 Changing channels ……………………………………… 30 Exiting ……………………………………………………… 31 Initial settings ……………………………………………… 30 Index 36 Saving ……………………………………………………… 22 Saving a phone number from the incoming or outgoing history …………………………………………… 23 Phone number ………………………………………………… 8 Photos ……………………………………………………… 26 Photo modes ……………………………………………… 26 Taking ……………………………………………………… 27 Viewing …………………………………………………… 27 V Viewing Photos ……………………………………………………… 27 Index 37 Radio Wave Exposure and Specific Absorption Rate (SAR) Information ★Mobile Phone GSM 850/900/1800/1900 ■ United States & Canada THIS PHONE MODEL HAS BEEN CERTIFIED IN COMPLIANCE WITH THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. The CDMA SOI11 mobile phones have been designed to comply with applicable safety requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed to not exceed the limits* of exposure to radio frequency (RF) energy set by governmental authorities. These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by international scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a safety margin designed to assure the safety of all individuals, regardless of age and health. The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate (SAR). Tests for SAR are conducted using standardized methods with the phone transmitting at its highest certified power level in all used frequency bands. While there may be differences between the SAR levels of various phone models, they are all designed to meet the 38 relevant guidelines for exposure to radio waves. For more information on SAR, please refer to the safe and efficient use chapter in the User Guide. The highest SAR value as reported to the authorities for this phone model when tested for use by the ear is 0.74 W/kg*, and when worn on the body is 0.81 W/kg* for speech and 0.92 W/kg* for data calls. Body worn measurements are made while the phone is in use and worn on the body with a Sony Ericsson accessory supplied with or designated for use with this phone. It is therefore recommended that only Ericsson and Sony Ericsson original accessories be used in conjunction with Sony Ericsson phones. **Before a phone model is available for sale to the public in the US, it must be tested and certified by the Federal Communications Commission (FCC) that it does not exceed the limit established by the government-adopted requirement for safe exposure*. The tests are performed in positions and locations (i.e., by the ear and worn on the body) as required by the FCC for each model. The FCC has granted an Equipment Authorization for this phone model with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. While there may be differences between the SAR levels of various phones, all mobile phones granted an FCC equipment authorization meet the government requirement for safe exposure. SAR information on this phone model is on file at the FCC and can be found under the Display Grant section of http://www. fcc.gov/oet/ea after searching on FCC ID PY7A5880013. Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) website at http://www.ctia.org. For more information on SAR, please refer to the safety chapter in the User’s Guide. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a margin of safety to give additional protection for the public and to account for any variations in measurements. SAR data information for residents in countries that have adopted the SAR limit recommended by the International Commission of Non-lonizing Radiation Protection (ICNIRP), which is 2 W/kg averaged over ten (10) gram of tissue (for example European Union, Japan, Brazil and New Zealand): ** This paragraph is only applicable to authorities and customers in the United States. ■ Europe This mobile phone model SOI11 has been designed to comply with applicable safety requirements for exposure to radio waves. These requirements are based on scientific guidelines that include safety margins designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate, or SAR. Tests for SAR are conducted using standardized methods with the phone transmitting at its highest certified power level in all used frequency bands. While there may be differences between the SAR levels of various phone models, they are all designed to meet the relevant guidelines for exposure to radio waves. The highest SAR value for this model phone tested by Sony Ericsson for use at the ear is 0.92 W/kg (10g). Radio Frequency (RF) exposure and Specific Absorption Rate (SAR) When your phone or Bluetooth handsfree is turned on, it emits low levels of radio frequency energy. International safety guidelines have been developed through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave exposure. The guidelines include a safety margin designed to assure the safety of all persons and to account for any variations in measurements. Specific Absorption Rate (SAR) is used to measure radio frequency energy absorbed by the body when using a mobile phone. The SAR value is determined at the highest certified power level in laboratory conditions, but because the phone is designed to use the minimum power necessary to access the chosen network, the actual SAR level can be well below this value. There is no proof of 39 difference in safety based on difference in SAR value. Products with radio transmitters sold in the US must be certified by the Federal Communications Commission (FCC). When required, tests are performed when the phone is placed at the ear and when worn on the body. For body-worn operation, the phone has been tested when positioned a minimum of 15 mm from the body without any metal parts in the vicinity of the phone or when properly used with an appropriate Sony Ericsson accessory and worn on the body. Use of the phone other than as tested may impact SAR and result in non-compliance with such RF exposure limits. For devices which include “WiFi hotspot” functionality, body-worn SAR measurements for operation of the device operating in WiFi hotspot mode were taken using a separation distance of 10mm. Use of third-party accessories may result in different SAR levels than those reported. For more information about SAR and radio frequency exposure go to: www.sonyericsson.com/health. Guidelines for Safe and Efficient Use Please follow these guidelines. Failure to do so might entail a potential health risk or product malfunction. If in doubt as to its proper function, have the product checked by a certified service partner before charging or using it. 40 Recommendations for care and safe use of our products • Handle with care and keep in a clean and dust-free place. • Warning! May explode if disposed of in fire. • Do not expose to liquid or moisture or excess humidity. • For optimum performance, the product should not be operated in temperatures below +5°C (+41°F) or above +35°C (+95°F). Do not expose the battery to temperatures above +35°C (+95°F). • Do not expose to flames or lit tobacco products. • Do not drop, throw or try to bend the product. • Do not paint or attempt to disassemble or modify the product. • Consult with authorized medical staff and the instructions of the medical device manufacturer before using the product near pacemakers or other medical devices or equipment. • Discontinue use of electronic devices or disable the radio transmitting functionality of the device where required or requested to do so. • Do not use where a potentially explosive atmosphere exists. • Do not place your product or install wireless equipment in the area above an air bag in a car. • Caution: Cracked or broken displays may create sharp edges or splinters that could be harmful upon contact. • Do not use the Bluetooth Headset in positions where it is uncomfortable or will be subject to pressure. Children unqualified battery may present a risk of fire, explosion, leakage or other hazard. Warning! Keep out of the reach of children. Do not allow children to play with mobile phones or accessories. They could hurt themselves or others. Products may contain small parts that could become detached and create a choking hazard. Personal medical devices Mobile phones may affect implanted medical equipment. Reduce risk of interference by keeping a minimum distance of 22cm (8.7 inches) between the phone and the device. Use the phone at your right ear. Do not carry the phone in your breast pocket. Turn off the phone if you suspect interference. For all medical devices, consult a physician and the manufacturer. Power supply (Charger) Connect the charger to power sources as marked on the product. Do not use outdoors or in damp areas. Do not alter or subject the cord to damage or stress. Unplug the unit before cleaning it. Never alter the plug. If it does not fit into the outlet, have a proper outlet installed by an electrician. When a power supply is connected there is a small drain of power. To avoid this small energy waste, disconnect the power supply when the product is fully charged. Use of charging devices that are not Sony Ericsson branded may pose increased safety risks. Battery New or idle batteries can have short-term reduced capacity. Fully charge the battery before initial use. Use for the intended purpose only. Charge the battery in temperatures between +5°C (+41°F) and +35°C (+95°F). Do not put the battery into your mouth. Do not let the battery contacts touch another metal object. Turn off the product before removing the battery. Performance depends on temperatures, signal strength, usage patterns, features selected and voice or data transmissions. Use of an Driving Some vehicle manufactures forbid the use of phones in their vehicles unless a handsfree kit with an external antenna supports the installation. Check with the vehicle manufacturer's representative to be sure that the mobile phone or Bluetooth handsfree will not affect the electronic systems in the vehicle. Full attention should be given to driving at all times and local laws and regulations restricting the use of wireless devices while driving must be observed. GPS/Location based functions Some products provide GPS/Location based functions. Location determining functionality is provided "As is" and "With all faults". KDDI/Sony Ericsson does not make any representation or warranty as to the accuracy of such location information. Use of location-based information by the device may not be uninterrupted or error free and may additionally be dependent on network service availability. Please note 41 that functionality may be reduced or prevented in certain environments such as building interiors or areas adjacent to buildings. Caution: Do not use GPS functionality in a manner which causes distraction from driving. Emergency calls Calls cannot be guaranteed under all conditions. Never rely solely upon mobile phones for essential communication. Calls may not be possible in all areas, on all networks, or when certain network services and/or phone features are used. from opening or responding to messages from unknown sources, using trustworthy services to access the Internet, and only downloading content to the mobile phone from known, reliable sources. Accessories Use only Sony Ericsson branded original accessories and certified service partners. Sony Ericsson does not test thirdparty accessories. Accessories may influence RF exposure, radio performance, loudness, electric safety and other areas. Third-party accessories and parts may pose a risk to your health or safety or decrease performance. Disposal of old electrical and electronic equipment Flight mode Bluetooth and WLAN functionality, if available in the device, can be enabled in Flight mode but may be prohibited onboard aircraft or in other areas where radio transmissions are prohibited. In such environments, please seek proper authorisation before enabling Bluetooth or WLAN functionality even in Flight mode. Malware Malware (short for malicious software) is software that can harm the mobile phone or other computers. Malware or harmful applications can include viruses, worms, spyware, and other unwanted programs. While the device does employ security measures to resist such efforts, KDDI/Sony Ericsson does not warrant or represent that the device will be impervious to introduction of malware. You can however reduce the risk of malware attacks by using care when downloading content or accepting applications, refraining 42 Electronic equipment and batteries should not be included as household waste but should be left at an appropriate collection point for recycling. This helps prevent potential negative consequences for the environment and human health. Check local regulations by contacting your local city office, your household waste disposal service, the shop where you purchased the product or calling a Sony Ericsson call centre. Do not attempt to remove internal batteries. Internal batteries shall be removed only by a waste treatment facility or trained service professional. Disposing of the battery Check local regulations or call a Sony Ericsson call centre for information. Never use municipal waste. Memory Card If the product comes complete with a removable memory card, it is generally compatible with the handset purchased but may not be compatible with other devices or the capabilities of their memory cards. Check other devices for compatibility before purchase or use. If the product is equipped with a memory card reader, check memory card compatibility before purchase or use. Memory cards are generally formatted prior to shipping. To reformat the memory card, use a compatible device. Do not use the standard operating system format when formatting the memory card on a PC. For details, refer to the operating instructions of the device or contact customer support. Warning! If the device requires an adapter for insertion into the handset or another device, do not insert the card directly without the required adapter. Precautions on memory card use • Do not expose the memory card to moisture. • Do not touch terminal connections with your hand or any metal object. • Do not strike, bend, or drop the memory card. • Do not attempt to disassemble or modify the memory card. • Do not use or store the memory card in humid or corrosive locations or in excessive heat such as a closed car in summer, in direct sunlight or near a heater, etc. • Do not press or bend the end of the memory card adapter with excessive force. • Do not let dirt, dust, or foreign objects get into the insert port of any memory card adapter. • Check you have inserted the memory card correctly. • Insert the memory card as far as it will go into any memory card adapter needed. The memory card may not operate properly unless fully inserted. • We recommend that you make a backup copy of important data. We are not responsible for any loss or damage to content you store on the memory card. • Recorded data may be damaged or lost when you remove the memory card or memory card adapter, turn off the power while formatting, reading or writing data, or use the memory card in locations subject to static electricity or high electrical field emissions. Protection of personal information Erase personal data before disposing of the product. To delete data, perform a master reset. Deleting data from the phone memory does not ensure that it cannot be recovered. KDDI/Sony Ericsson does not warrant against recovery of information and does not assume responsibility for disclosure of any information even after a master reset. Loudness warning! Avoid volume levels that may be harmful to your hearing. FCC Statement for the USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and 43 (2)This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by Sony Ericsson may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 44 Industry Canada Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1)this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device. Declaration of Conformity for CDMA SOI11 We, Sony Ericsson Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony Ericsson type AAH-5880013-BV and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 301 511:V9.0.2, EN 301 489-7:V1.3.1, EN 300 440-2:V1.4.1, EN 301 489-3:V1.4.1, EN 300 328: V1.7.1, EN 301 489-17:V2.1.1, EN 302 291-2:V1.1.1 and EN 60950-1:2006 +A11:2009, following the provisions of Radio Equipment and Telecommunication Terminal Equipment Directive 1999/5/EC Lund, March 2011 0682 Signature Dan Redin Corporate Vice President and Head of Development われわれはR&TTE指令の要求事項を満たしています(1999/5/EC) We fulfill the requirements of the R&TTE Directive (1999/5/ EC) 45 End User Licence Agreement Software delivered with this device and its media is owned by Sony Ericsson Mobile Communications AB, and/or its affiliated companies and its suppliers and licensors. Sony Ericsson grants you a non-exclusive limited licence to use the Software solely in conjunction with the Device on which it is installed or delivered. Ownership of the Software is not sold, transferred or otherwise conveyed. Do not use any means to discover the source code or any component of the Software, reproduce and distribute the Software, or modify the Software. You are entitled to transfer rights and obligations to the Software to a third party, solely together with the Device with which you received the Software, provided the third party agrees in writing to be bound by the terms of this Licence. This licence exists throughout the useful life of this Device. It can be terminated by transferring your rights to the Device to a third party in writing. Failure to comply with any of these terms and conditions will terminate the licence immediately. Sony Ericsson and its third party suppliers and licensors retain all rights, title and interest in and to the Software. To the extent that the Software contains material or code of a third party, such third parties shall be beneficiaries of these terms. This licence is governed by the laws of Sweden. When applicable, the foregoing applies to statutory consumer 46 rights. In the event Software accompanying or provided in conjunction with your device is provided with additional terms and conditions, such provisions shall also govern your possession and usage of the Software. About Open Source Software This product includes certain open source or other software originating from third parties that is subject to the GNU General Public License (GPL), GNU Library/Lesser General Public License (LGPL) and different and/or additional copyright licenses, disclaimers and notices. The exact terms of GPL, LGPL and some other licenses, disclaimers and notices are reproduced in the about box in this product and are also available at http://opensource.sonyericsson. com. Sony Ericsson offers to provide source code of software licensed under the GPL or LGPL or some other open source licenses allowing source code distribution to you on a CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling, upon written request to Sony Ericsson Mobile Communications AB, Open Source Software Management, Nya Vattentornet, SE-221 88 Lund, Sweden. This offer is valid for a period of three (3) years from the date of the distribution of this product by Sony Ericsson. 47 For inquiries, call: au Customer Service Center For general information and charges (toll free) From fixed-line phones: From au cell phones: area code not required PRESSING ZERO WILL CONNECT YOU TO AN OPERATOR AFTER CALLING 157 ON YOUR au CELL PHONE For loss, theft or damage and operation information (toll free) From fixed-line phones: From au cell phones: area code not required In case above numbers are not available, From EZweb: Access Method EZ▶Top Menu/Search▶auお客さまサポート (au Customer Support) ▶お問い合わせ (Inquiries) ・ Menus are subject to change without prior notice. Cell phone and PHS operators collect and recycle unused telephones, batteries and battery chargers at stores bearing the logo regardless of brand and manufacturer to protect the environment and reuse valuable resources. なるほど! au みんなでつくる、auQ&Aサイト Access Method EZ▶Top Menu/Search▶auお客さまサポート (au Customer Support) s Forum) ▶みんなでQ&A「なるほど! au 」(au User’ Read this code for an easy access to なるほど! au (au User’ s Forum).▶ ・The packet communication charge applies. Read this code for an easy access to au Online Manual. (Packet communication charges do not apply.) 1244-4494.1 January 2011,1st Edition Sales: KDDI CORPORATION • OKINAWA CELLULAR TELEPHONE COMPANY Manufactured by: Sony Ericsson Mobile Communications Japan, Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : 3.1-702 Trapped : False Producer : Acrobat Distiller 7.0.5 (Windows) GTS PDFX Conformance : PDF/X-1a:2001 GTS PDFX Version : PDF/X-1:2001 Create Date : 2011:03:29 16:09:25+09:00 Creator Tool : Adobe InDesign CS2_J (4.0.5) Modify Date : 2011:03:30 13:21:38+09:00 Metadata Date : 2011:03:30 13:21:38+09:00 Format : application/pdf Creator : . Title : Document ID : uuid:f7464ef1-514f-4aa6-a01c-ce9e068bf069 Instance ID : uuid:d524d26f-b25b-416c-8c43-3d2b1adaef7c Has XFA : No Page Count : 50EXIF Metadata provided by EXIF.tools