Sony DDA-2006 Bluetooth Headset User Manual Peppe static earhook A7 HBH PV705 folded

Sony Mobile Communications Inc Bluetooth Headset Peppe static earhook A7 HBH PV705 folded

UserManual.wiki >

DDA 2006 User Manual

08 user manual

Draft for Sony Ericsson Internal Use Only-PE1BluetoothTM HeadsetHBH-PV705EnglishLanguageLanguageLanguage

Draft for Sony Ericsson Internal Use Only-PE12Bluetooth™ Headset HBH-PV705User GuideUser GuideUser GuideUser GuideFCC statementThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Sony Ericsson HBH-PV705This manual is published by Sony Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this manual. All rights reserved.©Sony Ericsson Mobile Communications AB, 2006Publication number: LZT 108 8620/3 PE1Some of the services in this manual are not supported by all networks. This also applies to the GSM International Emergency Number 112. Contact your network operator or service provider if you are in doubt whether you can use a particular service or not.The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Ericsson is under license.This product is leadfree and halogenfree.

Draft for Sony Ericsson Internal Use Only-PE14FrontFrontFrontFrontCall handling buttonCall handling buttonCall handling buttonCall handling buttonIndicator lightIndicator lightIndicator lightIndicator lightCharging connectorCharging connectorCharging connectorCharging connectorDecrease volumeDecrease volumeDecrease volumeDecrease volumeIncrease volumeIncrease volumeIncrease volumeIncrease volume

Draft for Sony Ericsson Internal Use Only-PE15BackBackBackBackSpeakerSpeakerSpeakerSpeakerMicrophoneMicrophoneMicrophoneMicrophoneEar hookEar hookEar hookEar hook

Draft for Sony Ericsson Internal Use Only-PE16User guide symbolsUser guide symbolsUser guide symbolsUser guide symbolsGreen flashGreen flashGreen flashGreen flashRed flashRed flashRed flashRed flashSteady green lightSteady green lightSteady green lightSteady green lightSteady red lightSteady red lightSteady red lightSteady red lightRing signalRing signalRing signalRing signalBeep toneBeep toneBeep toneBeep tonePress and releasePress and releasePress and releasePress and releasePress and holdPress and holdPress and holdPress and holdPress simultaneouslyPress simultaneouslyPress simultaneouslyPress simultaneouslyPress and hold simultaneouslyPress and hold simultaneouslyPress and hold simultaneouslyPress and hold simultaneously

Draft for Sony Ericsson Internal Use Only-PE17Getting startedGetting startedGetting startedGetting startedCompatible chargersCompatible chargersCompatible chargersCompatible chargersFirst time use: Charge approximately 8 hours.First time use: Charge approximately 8 hours.First time use: Charge approximately 8 hours.First time use: Charge approximately 8 hours.CST-60CST-61CLA-60CDS-60

Draft for Sony Ericsson Internal Use Only-PE18ChargingChargingChargingChargingBattery needs chargingBattery needs chargingBattery needs chargingBattery needs chargingFully chargedFully chargedFully chargedFully chargedChargingChargingChargingCharging

Draft for Sony Ericsson Internal Use Only-PE19

Draft for Sony Ericsson Internal Use Only-PE110Adding the headset to the phone (pairing)Adding the headset to the phone (pairing)Adding the headset to the phone (pairing)Adding the headset to the phone (pairing)Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone.1. Turn on Bluetooth in your phone.2. Make sure Bluetooth visibility is on in your phone. This makes your phone visible to other Bluetooth devices.3. Prepare your headset according to page 15.4. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000.

Draft for Sony Ericsson Internal Use Only-PE111The headset beeps and the indicator light flashes green when successfully added.After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls).Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone.1. Turn on Bluetooth in your phone.2. Make sure Bluetooth visibility is on in your phone. This makes your phone visible to other Bluetooth devices.3. Prepare your headset according to page 15.4. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000.

Draft for Sony Ericsson Internal Use Only-PE112The headset beeps and the indicator light flashes green when successfully added.After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls).Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone.1. Turn on Bluetooth in your phone.2. Make sure Bluetooth visibility is on in your phone. This makes your phone visible to other Bluetooth devices.3. Prepare your headset according to page 15.4. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000.

Draft for Sony Ericsson Internal Use Only-PE113The headset beeps and the indicator light flashes green when successfully added.After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls).Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone.1. Turn on Bluetooth in your phone.2. Make sure Bluetooth visibility is on in your phone. This makes your phone visible to other Bluetooth devices.3. Prepare your headset according to page 15.4. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000.

Draft for Sony Ericsson Internal Use Only-PE114The headset beeps and the indicator light flashes green when successfully added.After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls).

Draft for Sony Ericsson Internal Use Only-PE115Preparing the headsetPreparing the headsetPreparing the headsetPreparing the headsetMake sure the headset is turned off (see page 17).Make sure the headset is turned off (see page 17).Make sure the headset is turned off (see page 17).Make sure the headset is turned off (see page 17).•A: Press and hold the call handling button and make sure the indicator light flashes red and green. B: If the headset only flashes green, press and hold the volume buttons until the indicator light flashes red and green.•A: Press and hold the call handling button and make sure the indicator light flashes red and green. B: If the headset only flashes green, press and hold the volume buttons until the indicator light flashes red and green.•A: Press and hold the call handling button and make sure the indicator light flashes red and green. B: If the headset only flashes green, press and hold the volume buttons until the indicator light flashes red and green.•A: Press and hold the call handling button and make sure the indicator light flashes red and green. B: If the headset only flashes green, press and hold the volume buttons until the indicator light flashes red and green.

Draft for Sony Ericsson Internal Use Only-PE116(5 s)A(5-8 s)B

Draft for Sony Ericsson Internal Use Only-PE117Turning the headset on (and off)Turning the headset on (and off)Turning the headset on (and off)Turning the headset on (and off)Note: If the indicator light flashes red and green your headset is ready to be added to a phone (see page 10).Note: If the indicator light flashes red and green your headset is ready to be added to a phone (see page 10).Note: If the indicator light flashes red and green your headset is ready to be added to a phone (see page 10).Note: If the indicator light flashes red and green your headset is ready to be added to a phone (see page 10).(5 s) (5 s)OnOnOnOnOffOffOffOff

Sony Ericsson Mobile Communications ABSE-221 88 Lund, Swedenwww.sonyericsson.comDraft for Sony Ericsson Internal Use Only-PE1LZT 108 8620/3 PD1Printed in XXXX

Draft for Sony Ericsson Internal Use Only-PE119Putting the headset onPutting the headset onPutting the headset onPutting the headset onLeft-ear useLeft-ear useLeft-ear useLeft-ear use

Draft for Sony Ericsson Internal Use Only-PE120CallingCallingCallingCallingRangeRangeRangeRangeOptimal performanceOptimal performanceOptimal performanceOptimal performanceLimited performanceLimited performanceLimited performanceLimited performance

Draft for Sony Ericsson Internal Use Only-PE121Making a callMaking a callMaking a callMaking a callAnswering a callAnswering a callAnswering a callAnswering a call

Draft for Sony Ericsson Internal Use Only-PE122Ending a callEnding a callEnding a callEnding a callRejecting a callRejecting a callRejecting a callRejecting a call

Draft for Sony Ericsson Internal Use Only-PE123Using voice commandsUsing voice commandsUsing voice commandsUsing voice commandsVoice commands, such as dial, redial, answer and reject, can be useful when using the headset. For more information on voice commands, and to know if your phone supports it, refer to the phone user guide.Voice commands, such as dial, redial, answer and reject, can be useful when using the headset. For more information on voice commands, and to know if your phone supports it, refer to the phone user guide.Voice commands, such as dial, redial, answer and reject, can be useful when using the headset. For more information on voice commands, and to know if your phone supports it, refer to the phone user guide.Voice commands, such as dial, redial, answer and reject, can be useful when using the headset. For more information on voice commands, and to know if your phone supports it, refer to the phone user guide.

Draft for Sony Ericsson Internal Use Only-PE124Making a call using voice commandsMaking a call using voice commandsMaking a call using voice commandsMaking a call using voice commandsMake sure that voice commands are enabled and recorded in your phone before you start using them.Make sure that voice commands are enabled and recorded in your phone before you start using them.Make sure that voice commands are enabled and recorded in your phone before you start using them.Make sure that voice commands are enabled and recorded in your phone before you start using them.

Draft for Sony Ericsson Internal Use Only-PE125Transferring a callTransferring a callTransferring a callTransferring a callTo transfer a call from headset to phone, refer to the phone user guide.To transfer a call from headset to phone, refer to the phone user guide.To transfer a call from headset to phone, refer to the phone user guide.To transfer a call from headset to phone, refer to the phone user guide.

Draft for Sony Ericsson Internal Use Only-PE126Turning the microphone off (and on) during a callTurning the microphone off (and on) during a callTurning the microphone off (and on) during a callTurning the microphone off (and on) during a call

Draft for Sony Ericsson Internal Use Only-PE127SettingsSettingsSettingsSettingsAdjusting ring volume (in standby mode)Adjusting ring volume (in standby mode)Adjusting ring volume (in standby mode)Adjusting ring volume (in standby mode)

Draft for Sony Ericsson Internal Use Only-PE128Adjusting speaker volume (during a call)Adjusting speaker volume (during a call)Adjusting speaker volume (during a call)Adjusting speaker volume (during a call)Warning! Loud volume could damage your hearing.Warning! Loud volume could damage your hearing.Warning! Loud volume could damage your hearing.Warning! Loud volume could damage your hearing.

Draft for Sony Ericsson Internal Use Only-PE129Master resetMaster resetMaster resetMaster resetMake sure the headset is turned on (see page 17).Make sure the headset is turned on (see page 17).Make sure the headset is turned on (see page 17).Make sure the headset is turned on (see page 17).(5 s)(5-8 s)

Draft for Sony Ericsson Internal Use Only-PE130Attaching the strapAttaching the strapAttaching the strapAttaching the strap

Draft for Sony Ericsson Internal Use Only-PE131Viewing regulatory informationViewing regulatory informationViewing regulatory informationViewing regulatory informationxxx xxx xx

Draft for Sony Ericsson Internal Use Only-PE132TroubleshootingTroubleshootingTroubleshootingTroubleshootingNo connection between headset and phoneMake sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again.For more information on Bluetooth and pairing, go to www.sonyericsson.com/learnaboutThe headset is automatically switched off•The battery is too low. Charge the headset (see page 8).•The headset switches off if you do not add it to the phone within 10 minutes. Prepare the headset again (see page 15).Unexpected behaviourDo a master reset (see page 29). After a master reset the headset is reset to factory settings and the paired Bluetooth devices are removed from your phone.Battery capacityA battery that has been infrequently used or a new one, could have reduced capacity. It may need to be charged/discharged a number of times (see page 8).

Draft for Sony Ericsson Internal Use Only-PE133No connection between headset and phoneMake sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again.For more information on Bluetooth and pairing, go to www.sonyericsson.com/learnaboutThe headset is automatically switched off•The battery is too low. Charge the headset (see page 8).•The headset switches off if you do not add it to the phone within 10 minutes. Prepare the headset again (see page 15).Unexpected behaviourDo a master reset (see page 29). After a master reset the headset is reset to factory settings and the paired Bluetooth devices are removed from your phone.Battery capacityA battery that has been infrequently used or a new one, could have reduced capacity. It may need to be charged/discharged a number of times (see page 8).

Draft for Sony Ericsson Internal Use Only-PE134No connection between headset and phoneMake sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again.For more information on Bluetooth and pairing, go to www.sonyericsson.com/learnaboutThe headset is automatically switched off•The battery is too low. Charge the headset (see page 8).•The headset switches off if you do not add it to the phone within 10 minutes. Prepare the headset again (see page 15).Unexpected behaviourDo a master reset (see page 29). After a master reset the headset is reset to factory settings and the paired Bluetooth devices are removed from your phone.Battery capacityA battery that has been infrequently used or a new one, could have reduced capacity. It may need to be charged/discharged a number of times (see page 8).

Draft for Sony Ericsson Internal Use Only-PE135No connection between headset and phoneMake sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again.For more information on Bluetooth and pairing, go to www.sonyericsson.com/learnaboutThe headset is automatically switched off•The battery is too low. Charge the headset (see page 8).•The headset switches off if you do not add it to the phone within 10 minutes. Prepare the headset again (see page 15).Unexpected behaviourDo a master reset (see page 29). After a master reset the headset is reset to factory settings and the paired Bluetooth devices are removed from your phone.Battery capacityA battery that has been infrequently used or a new one, could have reduced capacity. It may need to be charged/discharged a number of times (see page 8).www.sonyericsson.com/support/

Draft for Sony Ericsson Internal Use Only-PE136Declaration of conformityWe, Sony Ericsson Mobile Communications AB ofNya Vattentornet221 88 Lund, Swedendeclare under our sole responsibility that our product Sony Ericsson type DDA-0002006to which this declaration relates is in conformity with the appropriate standards EN 300 328, EN 301 489-17, EN 301 489-7 and EN 60950 following the provisions of Radio Equipment and Telecommunication Equipment directive 1999/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC.Lund, March 2006Ulf Persson, Head of Product Business Unit AccessoriesWe fulfill the R&TTE Directive.We fulfill the R&TTE Directive.We fulfill the R&TTE Directive.We fulfill the R&TTE Directive.