Sony DDA-2006 Bluetooth Headset User Manual Peppe static earhook A7 HBH PV705 folded
Sony Mobile Communications Inc Bluetooth Headset Peppe static earhook A7 HBH PV705 folded
Sony >
08 user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 675523 |
| Application ID | VhugDAUDujd7TZNEDeT87Q== |
| Document Description | 08 user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 155.52kB (1943975 bits) |
| Date Submitted | 2006-06-30 00:00:00 |
| Date Available | 2006-06-30 00:00:00 |
| Creation Date | 2000-09-20 09:32:31 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2006-03-24 14:24:50 |
| Document Title | Peppe_static earhook_A7_HBH_PV705_folded.fm |
| Document Creator | FrameMaker 7.0 |
| Document Author: | 23050742 |
English Language Language Language Draft for Sony Ericsson Internal Use Only-PE1 BluetoothTM Headset HBH-PV705 Bluetooth™ Headset HBH-PV705 User Guide User Guide User Guide User Guide This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Sony Ericsson HBH-PV705 This manual is published by Sony Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this manual. All rights reserved. ©Sony Ericsson Mobile Communications AB, 2006 Publication number: LZT 108 8620/3 PE1 Some of the services in this manual are not supported by all networks. This also applies to the GSM International Emergency Number 112. Contact your network operator or service provider if you are in doubt whether you can use a particular service or not. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Ericsson is under license. This product is leadfree and halogenfree. Draft for Sony Ericsson Internal Use Only-PE1 FCC statement Introduction Introduction Introduction Introduction Bluetooth™ headset HBH-PV705 The Bluetooth™ headset HBH-PV705 can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This user guide focuses on usage with a Sony Ericsson mobile phone. The Bluetooth™ headset HBH-PV705 can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This user guide focuses on usage with a Sony Ericsson mobile phone. Bluetooth™ headset HBH-PV705 The Bluetooth™ headset HBH-PV705 can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This user guide focuses on usage with a Sony Ericsson mobile phone. Bluetooth™ headset HBH-PV705 The Bluetooth™ headset HBH-PV705 can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This user guide focuses on usage with a Sony Ericsson mobile phone. Draft for Sony Ericsson Internal Use Only-PE1 Bluetooth™ headset HBH-PV705 Front Front Front Front Indicator light Indicator light Indicator light Indicator light Call handling button Call handling button Call handling button Call handling button Increase volume Increase volume Increase volume Increase volume Decrease volume Decrease volume Decrease volume Decrease volume Draft for Sony Ericsson Internal Use Only-PE1 Charging connector Charging connector Charging connector Charging connector Back Back Back Back Speaker Speaker Speaker Speaker Microphone Microphone Microphone Microphone Draft for Sony Ericsson Internal Use Only-PE1 Ear hook Ear hook Ear hook Ear hook User guide symbols User guide symbols User guide symbols User guide symbols Green flash Green flash Green flash Green flash Red flash Red flash Red flash Red flash Steady green light Steady green light Steady green light Steady green light Steady red light Steady red light Steady red light Steady red light Ring signal Ring signal Ring signal Ring signal Beep tone Beep tone Beep tone Beep tone Press and release Press and release Press and release Press and release Press and hold Press and hold Press and hold Press and hold Press simultaneously Press simultaneously Press simultaneously Press simultaneously Press and hold simultaneously Press and hold simultaneously Press and hold simultaneously Press and hold simultaneously Draft for Sony Ericsson Internal Use Only-PE1 Getting started Getting started Getting started Getting started Compatible chargers Compatible chargers Compatible chargers Compatible chargers CDS-60 CST-61 First time use: Charge approximately 8 hours. First time use: Charge approximately 8 hours. First time use: Charge approximately 8 hours. First time use: Charge approximately 8 hours. Draft for Sony Ericsson Internal Use Only-PE1 CST-60 CLA-60 Charging Charging Charging Charging Battery needs charging Battery needs charging Battery needs charging Battery needs charging Fully charged Fully charged Fully charged Fully charged Draft for Sony Ericsson Internal Use Only-PE1 Charging Charging Charging Charging Draft for Sony Ericsson Internal Use Only-PE1 10 Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Make sure Bluetooth visibility is on in your phone. This makes your phone visible to other Bluetooth devices. 3. Prepare your headset according to page 15. 4. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000. Draft for Sony Ericsson Internal Use Only-PE1 Adding the headset to the phone (pairing) Adding the headset to the phone (pairing) Adding the headset to the phone (pairing) Adding the headset to the phone (pairing) 11 After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls). Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Make sure Bluetooth visibility is on in your phone. This makes your phone visible to other Bluetooth devices. 3. Prepare your headset according to page 15. 4. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000. Draft for Sony Ericsson Internal Use Only-PE1 The headset beeps and the indicator light flashes green when successfully added. 12 After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls). Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Make sure Bluetooth visibility is on in your phone. This makes your phone visible to other Bluetooth devices. 3. Prepare your headset according to page 15. 4. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000. Draft for Sony Ericsson Internal Use Only-PE1 The headset beeps and the indicator light flashes green when successfully added. 13 After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls). Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions in the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Make sure Bluetooth visibility is on in your phone. This makes your phone visible to other Bluetooth devices. 3. Prepare your headset according to page 15. 4. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000. Draft for Sony Ericsson Internal Use Only-PE1 The headset beeps and the indicator light flashes green when successfully added. 14 After you have added the headset to the phone, the headset automatically connects to the phone as soon as it is turned on and within range (for example when you receive or make calls). Draft for Sony Ericsson Internal Use Only-PE1 The headset beeps and the indicator light flashes green when successfully added. 15 • A: Press and hold the call handling button and make sure the indicator light flashes red and green. B: If the headset only flashes green, press and hold the volume buttons until the indicator light flashes red and green. • A: Press and hold the call handling button and make sure the indicator light flashes red and green. B: If the headset only flashes green, press and hold the volume buttons until the indicator light flashes red and green. • A: Press and hold the call handling button and make sure the indicator light flashes red and green. B: If the headset only flashes green, press and hold the volume buttons until the indicator light flashes red and green. • A: Press and hold the call handling button and make sure the indicator light flashes red and green. B: If the headset only flashes green, press and hold the volume buttons until the indicator light flashes red and green. Draft for Sony Ericsson Internal Use Only-PE1 Preparing the headset Preparing the headset Preparing the headset Preparing the headset Make sure the headset is turned off (see page 17). Make sure the headset is turned off (see page 17). Make sure the headset is turned off (see page 17). Make sure the headset is turned off (see page 17). A (5-8 s) Draft for Sony Ericsson Internal Use Only-PE1 16 (5 s) Turning the headset on (and off) Turning the headset on (and off) Turning the headset on (and off) Turning the headset on (and off) 17 Off Off Off Off (5 s) (5 s) Note: If the indicator light flashes red and green your headset is ready to be added to a phone (see page 10). Note: If the indicator light flashes red and green your headset is ready to be added to a phone (see page 10). Note: If the indicator light flashes red and green your headset is ready to be added to a phone (see page 10). Note: If the indicator light flashes red and green your headset is ready to be added to a phone (see page 10). Draft for Sony Ericsson Internal Use Only-PE1 On On On On Sony Ericsson Mobile Communications AB SE-221 88 Lund, Sweden LZT 108 8620/3 PD1 Printed in XXXX Draft for Sony Ericsson Internal Use Only-PE1 www.sonyericsson.com Left-ear use Left-ear use Left-ear use Left-ear use 19 Draft for Sony Ericsson Internal Use Only-PE1 Putting the headset on Putting the headset on Putting the headset on Putting the headset on Calling Calling Calling Calling Range Range Range Range Optimal performance Optimal performance Optimal performance Optimal performance Limited performance Limited performance Limited performance Limited performance Draft for Sony Ericsson Internal Use Only-PE1 20 Answering a call Answering a call Answering a call Answering a call 21 Draft for Sony Ericsson Internal Use Only-PE1 Making a call Making a call Making a call Making a call Rejecting a call Rejecting a call Rejecting a call Rejecting a call 22 Draft for Sony Ericsson Internal Use Only-PE1 Ending a call Ending a call Ending a call Ending a call Using voice commands Using voice commands Using voice commands Using voice commands 23 Voice commands, such as dial, redial, answer and reject, can be useful when using the headset. For more information on voice commands, and to know if your phone supports it, refer to the phone user guide. Voice commands, such as dial, redial, answer and reject, can be useful when using the headset. For more information on voice commands, and to know if your phone supports it, refer to the phone user guide. Voice commands, such as dial, redial, answer and reject, can be useful when using the headset. For more information on voice commands, and to know if your phone supports it, refer to the phone user guide. Draft for Sony Ericsson Internal Use Only-PE1 Voice commands, such as dial, redial, answer and reject, can be useful when using the headset. For more information on voice commands, and to know if your phone supports it, refer to the phone user guide. 24 Draft for Sony Ericsson Internal Use Only-PE1 Making a call using voice commands Making a call using voice commands Making a call using voice commands Making a call using voice commands Make sure that voice commands are enabled and recorded in your phone before you start using them. Make sure that voice commands are enabled and recorded in your phone before you start using them. Make sure that voice commands are enabled and recorded in your phone before you start using them. Make sure that voice commands are enabled and recorded in your phone before you start using them. Transferring a call Transferring a call Transferring a call Transferring a call To transfer a call from headset to phone, refer to the phone user guide. To transfer a call from headset to phone, refer to the phone user guide. To transfer a call from headset to phone, refer to the phone user guide. To transfer a call from headset to phone, refer to the phone user guide. Draft for Sony Ericsson Internal Use Only-PE1 25 26 Draft for Sony Ericsson Internal Use Only-PE1 Turning the microphone off (and on) during a call Turning the microphone off (and on) during a call Turning the microphone off (and on) during a call Turning the microphone off (and on) during a call Settings Settings Settings Settings 27 Draft for Sony Ericsson Internal Use Only-PE1 Adjusting ring volume (in standby mode) Adjusting ring volume (in standby mode) Adjusting ring volume (in standby mode) Adjusting ring volume (in standby mode) Warning! Loud volume could damage your hearing. Warning! Loud volume could damage your hearing. Warning! Loud volume could damage your hearing. Warning! Loud volume could damage your hearing. 28 Draft for Sony Ericsson Internal Use Only-PE1 Adjusting speaker volume (during a call) Adjusting speaker volume (during a call) Adjusting speaker volume (during a call) Adjusting speaker volume (during a call) Master reset Master reset Master reset Master reset Make sure the headset is turned on (see page 17). Make sure the headset is turned on (see page 17). Make sure the headset is turned on (see page 17). Make sure the headset is turned on (see page 17). 29 (5 s) Draft for Sony Ericsson Internal Use Only-PE1 (5-8 s) 30 Draft for Sony Ericsson Internal Use Only-PE1 Attaching the strap Attaching the strap Attaching the strap Attaching the strap Viewing regulatory information Viewing regulatory information Viewing regulatory information Viewing regulatory information 31 Draft for Sony Ericsson Internal Use Only-PE1 xxx xxx xx Troubleshooting Troubleshooting Troubleshooting Troubleshooting 32 No connection between headset and phone Make sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again. For more information on Bluetooth and pairing, go to The headset is automatically switched off • The battery is too low. Charge the headset (see page 8). • The headset switches off if you do not add it to the phone within 10 minutes. Prepare the headset again (see page 15). Unexpected behaviour Do a master reset (see page 29). After a master reset the headset is reset to factory settings and the paired Bluetooth devices are removed from your phone. Battery capacity A battery that has been infrequently used or a new one, could have reduced capacity. It may need to be charged/ discharged a number of times (see page 8). Draft for Sony Ericsson Internal Use Only-PE1 www.sonyericsson.com/learnabout No connection between headset and phone 33 Make sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again. For more information on Bluetooth and pairing, go to www.sonyericsson.com/learnabout • The battery is too low. Charge the headset (see page 8). • The headset switches off if you do not add it to the phone within 10 minutes. Prepare the headset again (see page 15). Unexpected behaviour Do a master reset (see page 29). After a master reset the headset is reset to factory settings and the paired Bluetooth devices are removed from your phone. Battery capacity A battery that has been infrequently used or a new one, could have reduced capacity. It may need to be charged/ discharged a number of times (see page 8). Draft for Sony Ericsson Internal Use Only-PE1 The headset is automatically switched off No connection between headset and phone 34 Make sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again. For more information on Bluetooth and pairing, go to www.sonyericsson.com/learnabout • The battery is too low. Charge the headset (see page 8). • The headset switches off if you do not add it to the phone within 10 minutes. Prepare the headset again (see page 15). Unexpected behaviour Do a master reset (see page 29). After a master reset the headset is reset to factory settings and the paired Bluetooth devices are removed from your phone. Battery capacity A battery that has been infrequently used or a new one, could have reduced capacity. It may need to be charged/ discharged a number of times (see page 8). Draft for Sony Ericsson Internal Use Only-PE1 The headset is automatically switched off No connection between headset and phone 35 Make sure the headset is charged and within range of the phone (see page 8 and 20). Check or redo the Bluetooth settings in the phone. Try to pair the headset again. For more information on Bluetooth and pairing, go to www.sonyericsson.com/learnabout • The battery is too low. Charge the headset (see page 8). • The headset switches off if you do not add it to the phone within 10 minutes. Prepare the headset again (see page 15). Unexpected behaviour Do a master reset (see page 29). After a master reset the headset is reset to factory settings and the paired Bluetooth devices are removed from your phone. Battery capacity A battery that has been infrequently used or a new one, could have reduced capacity. It may need to be charged/ discharged a number of times (see page 8). www.sonyericsson.com/support/ Draft for Sony Ericsson Internal Use Only-PE1 The headset is automatically switched off Declaration of conformity 36 We, Sony Ericsson Mobile Communications AB of Nya Vattentornet 221 88 Lund, Sweden declare under our sole responsibility that our product to which this declaration relates is in conformity with the appropriate standards EN 300 328, EN 301 489-17, EN 301 489-7 and EN 60950 following the provisions of Radio Equipment and Telecommunication Equipment directive 1999/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC. Lund, March 2006 Ulf Persson, Head of Product Business Unit Accessories We fulfill the R&TTE Directive. We fulfill the R&TTE Directive. We fulfill the R&TTE Directive. We fulfill the R&TTE Directive. Draft for Sony Ericsson Internal Use Only-PE1 Sony Ericsson type DDA-0002006
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Mode : UseOutlines XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2000:09:20 09:32:31Z Creator Tool : FrameMaker 7.0 Modify Date : 2006:03:24 14:24:50+01:00 Metadata Date : 2006:03:24 14:24:50+01:00 Format : application/pdf Creator : 23050742 Title : Peppe_static earhook_A7_HBH_PV705_folded.fm Document ID : uuid:d7b88a52-df7f-401f-8c17-cc2bdd486328 Instance ID : uuid:f254f4ee-0c48-4e72-82f1-74046e284ef1 Page Count : 36 Page Layout : SinglePage Author : 23050742EXIF Metadata provided by EXIF.tools