Sony PCM D100 User Manual Using Sound Forge Audio Studio LE QSG 4475417121
User Manual: Sony PCM-D100 Using Sound Forge Audio Studio LE
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Step What you can do with Sound Forge Audio Studio LE Application Software Using Sound Forge Audio Studio LE 1 Install Sound Forge Audio Studio LE on your computer Sound Forge Audio Studio LE allows you to play and edit audio files recorded with your linear PCM recorder, imported from an audio CD, downloaded from a website, or copied from your computer. You can also burn an audio CD and enjoy a variety of features available in Sound Forge Audio Studio LE. Note Sound Forge Audio Studio LE does not support nor handle a DSD (.dsf/.dff/.wsd) file. You can divide a file, combine files, and delete files using the linear PCM recorder. For detailed procedures, refer to the operating instructions. System requirements for Sound Forge Audio Studio LE 1 Insert the supplied Application Disc (“Sound Forge Audio Studio LE”) into the CDOperating systems The setup window starts up automatically. Windows® 8.1 32 bit or 64 bit If the startup window does not appear automatically, open Windows Explorer, right-click the CD-ROM drive, double-click [Sound_Forge_Audio_Studio_LE_10.0.313.exe], and then follow the instructions on the screen. Note One of the above operating systems should be by default pre-installed. Any operating system other than those indicated above, upgraded operating systems or multi-boot environment are not supported. Hardware environment CPU: processor of 1 GHz or faster Easy audio edition ROM drive of your running computer. Windows® 7 32 bit or 64 bit Windows® 10 32 bit or 64 bit Sound Forge Audio Studio LE Installing Sound Forge Audio Studio LE 4 When the window to select the destination folder for installation appears, click [Install]. If you want to change the destination folder, click [Change] and select the desired folder. To start Sound Forge Audio Studio quickly from the desktop, check “Create a shortcut on the desktop.” The installation starts. 2 When the ”Welcome to the Sound Forge Audio Studio Installation Wizard” window appears, click [Next]. If you want to change the language for menus and messages, select the desired language. Free hard disk space: At least 350 MB (For software installation) Memory: At least 1 GB Sound board: Sound boards compatible with any of the supported operating systems Transfer files (To create a music CD, you need a CD-R/RW drive.) Microsoft .NET Framework 2.0* Internet connection Create a disc successfully installed.” window appears, click [Finish]. Disk drive: CD-ROM drive compatible with any of the supported operating systems Microsoft DirectX® 9.0c or higher Audio files 5 When the “Sound Forge Audio Studio has been Port: USB port * On Windows 8.1 or one of its later versions, Microsoft .NET Framework 3.5 must be enabled before you install Sound Forge Audio Studio LE. To enable it, click [Control Panel] - [Programs and Features] - [Turn Windows features on or off], select the check box for [.NET Framework 3.5 (includes .NET 2.0 and 3.0)], and then restart your computer. 3 Read the statements in the END USER LICENSE AGREEMENT, check “I have read the End User License Agreement and the Privacy Policy and agree to their terms.,” and then click [Next]. PCM-D100 4-475-417-12(1) © 2017 Sony Corporation Printed in China Sound Forge is a trademark or registered trademark of MAGIX Software GmbH in the United States and other countries. To the reverse side Step Step 2 Start Sound Forge Audio Studio LE Step 3 Copy and save files onto your computer 4 Create an audio CD You can exchange files between your linear PCM recorder and your computer without using Sound Forge Audio Studio LE. 1 Click [Start], and then click [All Programs] – [Sound Forge Audio Studio]. Sound Forge Audio Studio LE starts. When you start the software for the first time, the product registration window is displayed. 4 When the online registration window is displayed, enter your information for registration, and check “By providing this registration information, I acknowledge that I have read and agree with terms of the MAGIX Software GmbH Privacy Policy.,” then click [Finish]. The online registration starts. When it is completed, a confirmation message appears. Click [OK]. 1 Connect your linear PCM recorder to a running computer using the USB cable (supplied). You can create an audio CD from tracks registered in Sound Forge Audio Studio LE. 4 Disconnect the PCM recorder from your computer. Make sure that the ACCESS indicator on the linear PCM recorder is not lit and perform the following operation on your computer. Linear PCM recorder On Windows: On the taskbar at the bottom right of the desktop, click the following icon: Computer Connect to a USB port on a running computer For details on the operations of Sound Forge Audio Studio LE, refer to the Help Guide of Sound Forge Audio Studio LE. Select the [Open] button on the toolbar or [Explorer] from the [View] menu, and open the desired files in the workspace of Sound Forge Audio Studio. Then click “Eject PCMRECORDER.” On Mac: USB cable (supplied) Click the “PCMRECORDER” removal icon that appears on the sidebar of the Finder. 2 Click [Next]. CD. The icon and menu displayed may be different depending on the operating system. The icon may not always be displayed on the taskbar depending on your computer settings. Sound Forge Audio Studio LE starts. The tutorial window will start. You can select the desired operation and click to start the tutorial of the operation. 1 Open the files you want to burn to an audio 2 Make sure that your linear PCM recorder is recognized correctly by your computer. For details on the procedures to remove your linear PCM recorder from your computer, refer to the manual supplied with your computer. Importing audio files from a CD 1 Insert an audio CD into the CD-R/RW drive of your computer. 2 From the [File] menu, select [Extract Audio from CD]. 3 Copy files you want to transfer to your computer. Drag and drop the files you want to copy from “PCMRECORDER” or “MEMORY CARD” to the local disk on your computer. Click and hold, 3 When the product registration window is drag, displayed, check “Register online”, and then click [Next]. and then drop. 3 When the “Extract Audio from CD” window appears, select [Read by track] from the “Action” drop-down list. Select the tracks you want to import in the “Tracks to extract” list box, and click [OK]. To import all of the tracks on a CD, select [Read entire disc]. The selected audio tracks are extracted to Sound Forge Audio Studio LE. To use the extracted tracks, select [Save] from the [File] menu. PCMRECORDER or MEMORY CARD Your computer 3 From the [Tool] menu, click [Burn Track-at-Once Audio CD]. 4 When the “Burn Track-at-Once Audio CD” In Windows: Open [Computer] or [PC], and check that [PCMRECORDER] is recognized properly. In Mac: Check that the [PCMRECORDER] drive is displayed in the Finder. 2 Insert a new CD-R/CD-RW disc into the CD-R/RW drive of your computer. window is displayed, check “Close disc when done burning,” and click [Start]. Burning of the audio CD starts. When it is completed, a confirmation message is displayed. Click [OK]. Tip Closing the disc allows you to play files on an audio CD player. Note When you burn multiple files to an audio CD, check the “Close disc when done burning” only for the last file you burn. For the rest of files, make sure not to check the check box.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract, Print high-res Create Date : 2017:04:14 13:28:48-04:00 Modify Date : 2017:04:14 13:28:48-04:00 XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Metadata Date : 2017:04:14 13:28:48-04:00 Document ID : uuid:4456829e-6db4-474a-aeb8-c2f9e6c2ffef Instance ID : uuid:73577ae8-b601-4e18-ab0f-d72682ac506e Format : application/pdf Page Count : 2EXIF Metadata provided by EXIF.tools