Sony PM-0070 GSM/GPRS/EDGE/UMTS/HSPA/LTE mobile phone with Bluetooth, Bluetooth LE, WLAN 802.11abgn, GPS/A-GPS, RFID and FM Rx User Manual 08 user guide part 2

Download:
Mirror Download [FCC.gov]
Document ID	1802256
Application ID	cHkZyy718VFVEkFpXrn/tA==
Document Description	08 user guide part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	225.71kB (2821387 bits)
Date Submitted	2012-09-26 00:00:00
Date Available	2013-03-25 00:00:00
Creation Date	2017-10-30 01:00:56
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-30 01:00:56
Document Title	08 user guide part 2
Document Creator	Adobe Acrobat 8.3 Combine Files

Unmount USB
storage*
Mount USB
storage*
Clear USB
storage
Cancel connection of USB storage
to remove it safely.
Have USB storage recognized.
Formatting microSD card
From the Settings screen (P.112),
tap [Storage].
P.130
Tap [Erase SD card]u[Erase SD
card].
･
* Display changes depending on condition of USB
storage or microSD card recognition.
❖Information
･
Note that when available memory of internal storage
becomes 32KB or less, microSD card cannot be
mounted.
Enter your screen unlock method as
required.
Tap [Erase everything].
❖Information
･
Formatting microSD card deletes all the data in it.
Formatting the internal storage of the Formatting USB storage
terminal
Insert external memory such as a microSD
From the Settings screen (P.112),
tap [Storage].
Tap [Clear internal storage]u[Clear
internal storage].
･
Enter your screen unlock method as
required.
Tap [Erase everything].
❖Information
･
Formatting the terminal deletes all the data in it.
card into commercially available reader/
writer cable and connect the cable to the
terminal in advance.
From the Settings screen (P.112),
tap [Storage].
Tap [Clear USB storage]u[Erase].
･
Enter your screen unlock method as
required.
Tap [Erase everything].
❖Information
･
Formatting USB storage (external memory such as
microSD card) deletes all the data in it.
Settings 130
Increasing the available memory of
the terminal
If the terminal has a small memory, you can
perform the following operations to increase
available memory.
･ In the browser, you can clear all temporary
Internet files and browser history information.
For details, refer to "Clearing history" (P.111).
･ Uninstall programs that you no longer use. For
details, refer to "Deleting installed application"
(P.132).
Battery
Display battery usage data, remaining
battery level, available usage time against
the remaining battery level, etc.
Tap to update the information.
Apps
Manage and delete installed applications,
display memory usage condition, etc. or
change the settings.
Viewing permitted operation of the
applications in the terminal
You can check functions which are permitted
to access to each application in the progress
of performing, such as network
communication function or location
information function of the terminal.
From the Settings screen (P.112),
tap [Apps].
Tap an application to view.
Flick the screen up to view
permitted operations.
･
If all permitted operations do not
appear, tap [Show all].
Settings 131
Shutting down an application
Deleting all data of the application
If a pop-up window that indicates the
application does not reply appears, you can
force quit the application.
･
From the Settings screen (P.112),
tap [Apps].
Tap an application to force-quite.
Tap [Force stop].
Read the cautions displayed, tap
[OK].
❖Information
･
When you do not want to force stop the application,
tap [Cancel] and wait for a reply of the application.
❖Note
･
If you cancel the "status bar" of applications forcibly,
operations may not be performed correctly.
Before deleting all installed application data,
back up contents related to the application
that you want to save including data saved in
the application.
From the Settings screen (P.112),
tap [Apps].
Tap an application to delete the
data.
Tap [Clear data].
Read the cautions displayed, tap
[OK].
Deleting installed application
･
Before deleting installed application, back up
contents related to the application that you
want to save including data saved in the
application.
･ Some applications cannot be deleted.
From the Settings screen (P.112),
tap [Apps].
Tap an application to be deleted.
Tap [Uninstall].
Tap [OK].
When uninstallation is completed,
tap [OK].
Settings 132
❖Information
･
Some applications pre-installed in the terminal
cannot be uninstalled. For applications which cannot
be uninstalled, disabling is possible (P.133).
･ Applications can be deleted from the Application
screen. For details, refer to "Uninstalling an
application" (P.73).
Disabling application
You can disable some applications which
cannot be uninstalled or services. Disabled
applications are not displayed on the
Application screen and you cannot execute
them, but they are not uninstalled.
From the Settings screen (P.112),
tap [Apps].
Tap [All].
Tap an application to be disabled.
Tap [Disable].
Deleting cache of the application
From the Settings screen (P.112),
tap [Apps].
Tap an application to delete cache.
Tap [Clear cache].
Deleting settings for activating the
application
You can delete settings for activating the
application and restore to the default.
From the Settings screen (P.112),
tap [Apps].
Tap an application to delete its
settings.
Tap [Clear defaults].
Read the cautions displayed, tap
[OK].
･
To enable again, tap [Enable].
❖Information
･
When you disabled an application, some other
applications linked to the disabled application may
not be operated correctly. Enable the disabled
application again to operate them correctly.
Settings 133
Xperia™
Personal
Set preferred application in the terminal. You
can also set synchronization function for
Facebook in the terminal, make settings for
USB connection or Wi-Fi connection to a PC
or other devices.
About
PlayStation
Certified
Connectivity
Facebook
inside Xperia™
LiveWare™
manager
Display PlayStation Certified.
P.150
P.136
Search applications for accessories
such as headset etc. or set operation
when application starts.
Preferred apps P.60
settings
docomo service
You can set passwords for applications
provided by docomo or to use the services
supporting AUTO-GPS.
Application
manager
Wi-Fi
Set to check update for
applications regularly.
Set to use docomo service via
Wi-Fi.
docomo apps
Set a password for applications
password
provided by docomo. docomo
apps password is set "0000" by
default.
AUTO-GPS
Set to use the services
supporting AUTO-GPS.
docomo location
Set location information
information
function for imadoco search,
imadocokantan search and
Keitai-Osagashi Service.
docomo Wi-Fi かんた Set the terminal for using
ん接続 (docomo Wi- docomo Wi-Fi or home Wi-Fi.
Fi easy connection)
Send preinstalled
Set to send preinstalled
apps usage status application usage status.
Open source
View open source licenses.
licenses
Settings 134
Accounts & sync
You can manage (add or delete) online
service accounts or synchronize contacts,
messages, etc. saved in online services with
the terminal.
･
When you sign in, "Backup and restore" screen may
appear. Backup is not available using a Google
account.
･ Tap Google account displayed on the "Accounts &
sync" screen and synchronize each data from the
following items manually.
Sync Browser
Setting Google account
You can create a Google account on your
terminal and use Google services such as
Gmail, Google Talk, Google Calendar, Google
Play, etc.
You can set multiple Google accounts on the
terminal.
From the Settings screen (P.112),
tap [Accounts & sync]u[Add
account]u[Google].
Follow the registration wizard, set
a Google account.
･
If you have no Google account, create
an account.
･ If you have already the Google account,
sign in.
❖Information
･
You can use the terminal without creating your
Google account, however the services such as
Google Talk, Gmail, Google Play, etc. are not available.
･ To log in, you need a Google account and a
password.
Sync Calendar
Sync Contacts
Sync Gmail
Sync Google
Photos
Sync Picasa
extension
Synchronize browser settings saved
in Google account such as
bookmarks with web function of the
terminal.
Synchronize calendar information
such as schedule, etc., stored in
Google account with Calendar in the
terminal.
Synchronize contacts stored in
Gmail with the phonebook stored in
the terminal.
Synchronize email logs used in
Gmail account with Gmail on the
terminal.
Synchronize web album Google
Photos with album in the terminal*.
Synchronize web album of Picasa
used in Gmail account with Album in
the terminal.
* If a lot of photos are included to Picasa web album
used in Google account or web album uploaded
by Google+, it may consume a lot of battery power
or increase data communication volume during
the synchronization.
Settings 135
･
If you set a Google account and use Google+ in it,
"Sync Google+" appears. Tap it to synchronize and
display instant upload photos in the Album in the
terminal. To upload photos automatically, select
settings to enable the instant upload on the
confirmation screen when you log in Google+.
･ Make sure to check if the data connection is available
before sign in to the Google account. For checking
the data connection status, see "Status icon" (P.33).
Setting Facebook account
When you register or sign in Facebook, you
can display profile information published by
online "Friend" to Phonebook. And you can
display Facebook updates of "Friends" in
Timescape.
❖Information
･
If you do not have a Facebook account, you can also
create a new account at http://www.facebook.com.
･ If you download and install client applications for
Twitter, you can setup accounts and synchronize
contacts information in the same manner as
Facebook.
From the Settings screen (P.112),
tap [Accounts & sync]u[Add
account]u[Facebook].
･
If you already have a Facebook account
and set account from Phonebook or
Timescape of the terminal, you need
not add a new account.
Enter your sign in information.
･
If you have no Facebook account,
register an account.
･ If you have Facebook account, sign in.
Settings 136
❖Information
･
Set Facebook account to display in the status bar.
Drag the status bar downwards, tap [Facebook inside
Xperia™], mark the [Facebook integration] checkbox,
read the displayed note, and then tap [Accept]. Tap
(Facebook inside Xperia™) added to the
"Accounts & sync" screen, and tap the following
items to synchronize and display corresponding
data.
Synchronize events such as
Friends' birthdays, etc., stored in
Facebook with Calendar in the
terminal.
Sync Contacts
Synchronize profile of Friends
stored in Facebook with the
phonebook stored in the terminal.
Sync Facebook Synchronize photos registered to
photo extension Facebook with the Album in the
terminal.
Sync Friends'
Synchronize music that Friends
music
specified "Like" in Facebook with
WALKMAN in the terminal.
Setting other account
You can use Corporate (Exchange
ActiveSync), docomo account, Email,
Facebook inside Xperia™ other than Google
account (P.135) or Facebook account (P.136).
■
Corporate (Exchange ActiveSync)
account
･
Sync Calendar
■
If you have Corporate (Exchange
ActiveSync) account, from the Settings
menu screen (P.112), tap [Accounts &
sync]u[Add account]u[Corporate] and
set according to the onscreen instruction.
docomo account
･
docomo account helps you to use " ドコモ
バックアップ (docomo backup)" service
(P.67) provided by NTT DOCOMO.
docomo account is set by default.
Removing account
From the Settings screen (P.112),
tap [Accounts & sync] and select a
service account you want to
delete.
Tap , then tap [Remove
account]u[Remove account].
Settings 137
❖Information
･
The first set Google account is registered as backup
account. When a backup account is removed,
caution appears on the status bar.
･ docomo account cannot be deleted.
･
Setting Auto-sync
Synchronize information of online service
with the terminal. You can display and edit
information on the terminal or a PC.
You need to set your online service account
(Google account, Facebook account, etc.) in
the terminal to synchronize in advance.
From the Settings screen (P.112),
tap [Accounts & sync].
Tap
or drag it to the right.
Read the cautions displayed, tap
[OK].
Tap an online service whose
account is set.
Tap to mark an item for automatic
synchronization.
If the items to be synchronized are
marked and checkboxes are led by ,
synchronization starts. When is not
displayed, tap and tap [Sync now] to
start synchronization.
❖Note
･
Tap
or drag it to the right to permit to
synchronize with your Gmail, calendar, contacts, and
profile information published by "Friends", etc. in
Google account automatically. These
communications may cause you to pay packet
communications charges.
･ If
(auto-sync is disabled) is set, you can
synchronize manually. On the settings screen (P.112),
tap [Accounts & sync], tap the service where your
account is set to display the synchronizing items,
then tap items you want to synchronize.
Canceling synchronization
Tap
during a synchronization.
Tap [Cancel sync].
Settings 138
Location services
Set whether to permit the location
information service.
Google's location
service
GPS satellites
Location &
Google search
P.204
P.204
Set whether to permit Google to
use location information using
result etc. of Google search.
Security
Set options related to security.
Screen lock
Owner info
P.142
Set text to be displayed on
the unlock screen.
Set up SIM card lock
P.141
Make passwords visible Set whether to show the
input character before "・"
appears on the password
entry screen.
Device administrators
Set whether to enable
device administrator.
"Omakase Lock" is enabled
by default*1
Unknown sources
P.145
Trusted credentials
Allow applications to
access secure certificates
and other credentials.*2
Install from internal
Install encrypted
storage
certificates from internal
storage.
Clear credentials
Clear all certificates or
credential information
from the credential
storage *3.
*1 To use Omakase Lock, enable "Omakase Lock".
*2 Set the password to the credential storage in
advance.
*3 Save certificates and credential information in the
credential storage.
Settings 139
Protecting docomo mini UIM card
Some functions provided for convenient use
of the terminal require the security code to
use them. Besides the security code for
locking the terminal, the network security
code necessary for the network services etc.
are available. Make use of the terminal using
an appropriate security code according to
the purpose.
■
Notes on the security codes
･
Avoid using a number that is easy to
guess, such as "birth date", "part of your
phone number", "street address number
or room number", "1111", and "1234".
Make sure to make a note of the security
code you set lest you should forget it.
･ Be very careful not to let others know your
security code. If your security code is
known by anyone else, DOCOMO shall
have no liability for any loss due to any
unauthorized use of it.
･ If you forget your security codes, you must
bring your official identification (such as
drivers license), the terminal, and docomo
mini UIM card with you to the nearest
docomo Shop. For details, contact the
"General Inquiries" on the last page of this
manual.
･
The PUK code is written on the
subscription form (copy for customer)
handed at the subscription in the
docomo Shop. If you subscribed other
than docomo Shop, you must bring your
official identification (such as drivers
license), the docomo mini UIM card with
you to the nearest docomo Shop or
contact the "General Inquiries" on the last
page of this manual.
Network security code
The network security code is a 4-digit
number necessary for identification or using
the docomo Network Services at reception of
your request in docomo Shop or at docomo
Information Center. It can be set any number
at the subscription and also changed later by
yourself.
You can change your network security code
to the new one using the PC if you have the
"docomo ID"/"Password" for the "My
docomo"* General support site for PC.
Alternatively, from the Home screen, tap
[dmenu] and [ お客様サポートへ (To Customer
Support)]u[ 各種お申込・お手続き
(Subscription/Procedure)]. (In Japanese only.)
* For information on "My docomo" and " お客様
サポート (Customer Support)", see the
previous page of the last page of this manual.
Settings 140
PIN code
Personal Unblocking Key (PUK code)
You can set security code which named PIN
code to docomo mini UIM card. It is set
"0000" at the subscription. They can be
changed by yourself.
PIN code is a 4- to 8-digit number (code) that
must be entered for user confirmation to
prevent unauthorized use by a third party
every time you insert the docomo mini UIM
card into the terminal or when the terminal is
powered on. Entering the PIN code enables
making/receiving calls and terminal
operation.
･ If you use a newly purchased terminal with
docomo mini UIM card you have been using
inserted, use the PIN code set on the former
terminal. If you did not change the setting, the
code is "0000".
･ If you enter a wrong PIN code 3 times
consecutively, the PIN code is locked and
cannot be used anymore. In this case, unlock
with "PUK". (P.141)
The PUK code is an 8-digit number for
canceling the locked PIN code. The PUK code
cannot be changed by yourself.
･ If you failed to enter PUK code 10 times
consecutively, the docomo mini UIM card is
locked. Please contact a docomo Shop.
Enabling the docomo mini UIM card
PIN
By setting PIN (security code) and entering
PIN code when powered on, you can protect
the docomo mini UIM card from improper
use.
From the Settings screen (P.112),
tap [Security]u[Set up SIM card
lock]u[Lock SIM card].
Enter the PIN code of the docomo
mini UIM card and tap [OK].
･
[Lock SIM card] is marked.
Entering the PIN code when powered
on
On the PIN code entry screen,
enter the PIN code of the docomo
mini UIM card.
Tap [OK].
Settings 141
Changing the PIN code
･
You can change the PIN code only when the
PIN of docomo mini UIM card is enabled.
From the Settings screen (P.112),
tap [Security]u[Set up SIM card
lock]u[Change SIM PIN].
Enter the current PIN code of the
docomo mini UIM card and tap
[OK].
Enter the new PIN code of the
docomo mini UIM card and tap
[OK].
Enter the new PIN code of the
docomo mini UIM card again and
tap [OK].
Unblocking the locked docomo mini
UIM card
On the PUK code entry screen,
enter the PUK code of the docomo
mini UIM card.
Tap [New SIM PIN] field to enter
new PIN code of docomo mini UIM
card.
Tap [OK].
Screen lock
You can secure your data by requiring a
screen unlock pattern every time the
terminal is turned on or every time it is
activated from sleep mode.
There are 5 types of screen lock settings:
"Slide", "Face Unlock", "Pattern", "PIN" and
"Password". (P.143)
Settings 142
Setting screen unlock method
From the Settings screen (P.112),
tap [Security]u[Screen lock].
Tap [Slide]/[Face Unlock]/
[Pattern]/[PIN]/[Password].
Changing screen unlock method
･
Enter the set unlock pattern/PIN/
password.
･ If you should fail 5 times when you
enter the unlock pattern, wait 30
seconds and then try again.
･
When you select [Face Unlock] follow
the onscreen instructions to set face
authentication. For Screen lock when
the Face Unlock cannot be unlocked,
select pattern or PIN to enter.
･ When you select [Pattern], follow the
onscreen instructions to enter unlock
pattern.
Set security question and answer in case
you forget the pattern.
･ When you select [PIN], follow the
onscreen instructions to enter 4 or
more numbers. This "PIN" code is
different from a PIN code to be set to
docomo mini UIM card (P.141).
･ When you select [Password], follow the
onscreen instructions to enter 4 or
more characters including alphabets.
From the Settings screen (P.112),
tap [Security]u[Screen lock].
Tap [Slide]/[Face Unlock]/
[Pattern]/[PIN]/[Password].
･
Select items you want to change into.
For setting procedure, see Step 2 (P.143)
of "Setting screen unlock method".
Locking the screen
Once screen unlock method (P.143) is set, the
screen is locked when the sleep mode is set
or p is pressed.
Unlocking the screen lock
Press p to turn the backlight
on.
Enter unlock screen method.
･
Enter the set Slide/Face unlock/unlock
pattern/PIN/password.
Settings 143
If you forget how to unlock
■
If you set "Pattern"
"Incorrect pattern" appears when you enter
incorrect unlock pattern 5 times
consecutively.
･ Tap [Next], and answer the security
question that you set for the unlock
pattern setting, then tap [Unlock] to
unlock the screen lock.
･ If you set Google account, on the
"Incorrect pattern" screen, tap [Next] to
display "Answer question" and "Enter
Google account details".
- Mark [Answer question] and tap [Next],
and answer the question that you set for
the unlock pattern, then tap [Unlock] to
unlock the screen lock.
- Mark [Enter Google account details], tap
[Next], and enter Google account and
password, then tap [Sign in] to unlock
the screen lock.
･ When setting new unlock pattern after
unlocking screen lock, "Screen unlocked"
appears. Tap [Yes] to reset unlock pattern.
❖Information
･
Tap [Try again] to retry entering pattern in 30
seconds.
･ Alternatively, tap [Try again] and [Forgot pattern?] to
display answering question screen that you set the
unlock pattern.
･ You can set multiple Google accounts. To unlock the
screen with Google account and password, enter
one of those accounts.
■
If you set "PIN"/"Password"
Please contact a docomo Shop.
Canceling screen lock
You can cancel screen lock pattern after you
set.
From the Settings screen (P.112),
tap [Security]u[Screen lock].
･
Enter the set unlock pattern/PIN/
password.
Tap [None].
Settings 144
Permitting downloading unknown
source's application
Before you can download unknown source's
applications, set the terminal to enable
downloading.
Applications you download may be of
unknown origin. To protect your terminal
and personal data, only download
applications from trusted sources such as the
Google Play etc.
From the Settings screen (P.112),
tap [Security].
Tap [Unknown sources].
Read the cautions displayed, tap
[OK].
･
[Unknown sources] checkbox is
marked.
Language & input
You can select language and input method.
Language
Spelling correction
Personal dictionary
Default
Google voice typing
Shabette-Key-Nyuryoku
Xperia™ Chinese
keyboard
Xperia™ Japanese
keyboard
Xperia™ keyboard
Voice Search
Text-to-speech output
Pointer speed
P.145
Set spelling correction.
Register words.
Set input method.
P.53
P.146
P.146
Set pointer speed of
mouse etc.
Changing phone language
From the Settings screen (P.112),
tap [Language &
input]u[Language].
Select a language and tap [Done].
･
When you select Japanese, " 完了
(Done)" is displayed, but its display
varies by the language you selected.
Settings 145
❖Information
･
If you choose the wrong language and cannot read
the menu texts, go to http://www.sonymobile.co.jp/
so-01e/faq.html for help (in Japanese only).
Setting Voice Search
Language
SafeSearch
Block
offensive
words
Select language used for Google
voice search.
Set filter explicit.
Set whether to display recognized
offensive voice results.
Text-to-speech settings
Google Textto-speech
Engine*
Pico TTS*
Speech rate
Listen to an
example
Set language for text-to speech and
audio synthesis engine to read out
text.
Make settings for installed voice
synthesis engine.
Set speed at reading out text.
Playback sample of audio synthesis.
* Japanese is not supported.
Backup & reset
Restore the terminal to default.
Resetting the terminal
Resetting the terminal deletes all data,
including downloaded applications and
accounts, and resets the terminal back to the
initial (default) state. Make sure to back up
important data you have on the terminal
before you reset the terminal.
For the initial settings, see "Initial settings
(Setup guide)" (P.31).
From the Settings screen (P.112),
tap [Backup & reset]u[Factory
data reset]u[Reset phone].
･
Mark [Erase internal storage] checkbox
to delete all contents (music, photos,
videos, etc.) on the internal storage.
･ Enter your screen unlock method as
required.
Tap [Erase everything].
･
The terminal restarts automatically.
❖Information
･
If you reset the terminal, license information for the
DRM protected content may be erased making the
content unable to be played.
･ While restarting or resetting the terminal, just wait. If
you remove the battery pack while restarting or
resetting the terminal, it may cause malfunction.
Settings 146
System
Date & time
You can change the date and time in the
terminal.
To set date/time or time zone manually,
unmark [Automatic date & time] or
[Automatic time zone] to disable networkprovided time/time zone in advance.
Setting the date
From the Settings screen (P.112),
tap [Date & time]u[Set date].
Drag number to adjust date.
Tap [Set].
Setting the time
From the Settings screen (P.112),
tap [Date & time]u[Set time].
Adjust date and time
automatically by using
network-provided information.
Automatic time zone Adjust time zone
automatically by using
network-provided information.
Set date
P.147
Set time
P.147
Select time zone
P.147
Use 24-hour format P.148
Select date format P.148
Drag number to adjust hour and
minute.
From the Settings screen (P.112),
tap [Date & time]u[Select time
zone].
❖Information
Select time zone you want to set.
Automatic date &
time
･
Correction of the time differences may not be
performed correctly depending on the overseas
telecommunication carrier. In that case, set time
zone manually (P.147).
･
When you unmark [Use 24-hour
format], you can change [AM]/[PM].
Tap [Set].
Setting the time zone
Settings 147
Setting the time format
From the Settings screen (P.112),
tap [Date & time] and mark/
unmark [Use 24-hour format]
checkbox.
･
Mark the checkbox to shift to 24-hour
format, and unmark to shift to 12-hour
format.
Accessibility
You can set user support service which
sounds or vibrates according to users
operation and call end operation.
TalkBack
Large text
Power button ends call
Setting the date format
From the Settings screen (P.112),
tap [Date & time]u[Select date
format].
Select date format you want to set.
Auto-rotate screen
Speak passwords
Touch & hold delay
Install web scripts
Set user support service
(TalkBack).
Enlarge text size.
Set to end a call by
pressing p.
P.38
Output password by voice
sound.
Set response speed for
operation of touching and
holding the screen.
Set whether to install
script from Google.
Settings 148
Developer options
Put the terminal into debug mode when
connecting USB or set the screen backlight to
ON while charging.
Keeping the screen backlight ON
while charging
From the Settings screen (P.112),
tap [Developer options].
Mark [Stay awake] checkbox.
About phone
You can check your own phone number,
signal level, legal information, etc.
Software update
Status
Legal information
Model number
Android version
Baseband version
Kernel version
Build number
P.234
Check your own phone
number, signal level, battery
level, etc.
Check license agreement, terms
of use, etc.
Check version and number.
Settings 149
File management
Handling a file
Files in the terminal should be operated on
the file handling application. For example, to
delete files saved in a microSD card or
internal storage, use the deletion function of
each application.
With "Share" function of each application,
you can exchange files via Bluetooth or by
email file attachment sending to/receiving
from other compatible devices.
In addition, with the terminal connected to a
PC, you can move to the PC or delete files in
the internal storage or a mounted microSD
card. If you install PC Companion and use
Media Go, you can manage files between a
PC and the terminal mutually.
With "Sync Zone" of PC Companion, you can
synchronize contacts in the terminal and
calendar with Outlook, etc. of a PC.
Transferring and moving
data
You can transfer and move images, music
data and some other data. Sharing some data
may not be permitted due to copyright.
Using microUSB cable
By connecting the terminal and a PC with the
supplied microUSB cable, you can exchange
data between the terminal and the PC.
Connecting the terminal and a PC
using a microUSB cable
Connect the terminal to a PC using
a microUSB cable (P.29).
･
When you connect microUSB cable for
the first time, the driver software for the
terminal is installed to a PC. Wait for a
while until installation is completed. A
confirmation screen for installation of
PC Companion software appears when
the driver software installation is
completed.
･ The terminal is connected by "Media
transfer mode (MTP)" which is set by
default. Follow onscreen instructions
on a PC to access "Internal Storage/SD
Card" of the terminal.
File management 150
2
Tap [Skip].
･
❖Information
･
Window that appears when connecting to a PC may
vary depending on the operating system (OS) of a
PC.
･ From the Home screen, tap
and tap
[Settings]u[Xperia™]u [Connectivity] to check
connection mode and change the settings as
follows.
Install PC
Companion
USB connection
mode
TRUSTED
DEVICES
･
Display PC Companion installation
wizard when connected to a PC.
USB connection mode when
connecting to a PC can be
selected between "Media transfer
mode (MTP)" and "Mass storage
mode (MSC)".
Connect the terminal and a host
device in a pair via Wi-Fi network.
(P.153)
Connecting with "Mass storage mode (MSC)" also
accesses microSD card as a removal disk. microSD
card cannot be accessed from the terminal and
functions using microSD card may become
unavailable in Camera, Album, etc. while connecting
to a PC.
If you install PC Companion by tapping [Install] in
Step 2, you can use the following applications on a
PC for managing media files, creating backup files,
etc. when connecting the terminal and the PC. For
details, check on the PC Companion screen after
installation.
Support Zone
Update software of the terminal
connecting to a PC. (P.236)
Contacts Setup Copy the contacts data of the
mobile phone previously used to the
terminal.
Media Go
P.154
Sync Zone
Synchronize calendar and contacts
between the terminal and Outlook
etc.
Back up and
Back up the terminal data or move
restore
the data to another terminal.
File Manager Check file type, update time,
location, etc. on the terminal.
･
When the terminal is connected to a PC, charging
starts automatically. For details, see "Charging with a
PC" (P.29).
File management 151
Disconnecting the microUSB cable
safely
Dragging and dropping data on the
terminal and a PC
･
Do not disconnect the microUSB cable during
data transferring. Data may be damaged.
･ If you connect the terminal in the Media
transfer mode (MTP), make sure that data
transfer is not in progress and just disconnect
the microUSB cable.
■
■
Mass storage mode (MSC)
Drag the status bar downwards.
･
When "Internal storage & SD card" is
displayed, go to Step 3.
When "SD card connected" is displayed,
go to Step 2.
Tap [SD card connected].
Disconnect the microUSB cable.
･
"SD card disconnected" appears in the
status bar.
Media transfer mode (MTP)
Connect the terminal to a PC using
a microUSB cable.
･
■
Drag and drop selected data
between the terminal and a PC.
Mass storage mode (MSC)
Connect the terminal to a PC using
a microUSB cable.
･
"Int.storage/SD card connected"
appears in the status bar.
"SD card connected" appears in the
status bar.
Drag and drop selected data
between the terminal and a PC.
❖Information
･
You can transfer files using a microUSB cable on most
devices and the following operating systems (OSs)
that supports the USB mass-storage memory
interface.
- Microsoft Windows 7
- Microsoft Windows Vista
- Microsoft Windows XP
File management 152
Connecting the terminal to a PC
on a Wi-Fi network
If the terminal and a PC* are connected in a
pair on a Wi-Fi network, automatic
connection/disconnection of internal storage
of the terminal with a PC is enabled when the
terminal user comes in and out of the Wi-Fi
area. You can easily access to files in the
internal storage of the terminal from a
connected PC.
* Use Microsoft Windows 7 to make a pair
setting. Pair setting cannot be made under
Microsoft Windows XP, Microsoft Windows
Vista or other OS.
Connect a PC you want to set in a
pair to a Wi-Fi network.
Connect the terminal to a Wi-Fi
network (P.114).
Connect the terminal to a PC using
a microUSB cable.
･
When a confirmation screen for
installation of PC Companion software
appears on the terminal, tap [Skip].
Make sure that "Xperia AX
SO-01E " is displayed as a portable
device on the explorer of the PC.
Right click the portable device
icon, then click " ネットワーク構成
(network composition)".
Click " 次へ (Next)".
On the pop-up screen of the
terminal, tap [Pair].
10
On the network composition of the
portable device screen of the PC,
click " 完了 (Done)".
Disconnect the microUSB cable.
From the Home screen, tap
and
tap [Settings]u[Xperia™]u
[Connectivity]u"Host name" (PC
name) in the "TRUSTED DEVICES"
field.
11
Tap [Connect].
･
The terminal and the PC are connected
in "Media transfer mode (MTP)" on a WiFi network, and you can exchange data
files.
File management 153
❖Information
Using Bluetooth function
･
From the Home screen, tap
and tap
[Settings]u[Xperia™]u[Connectivity] to display
"Host name" (PC name) in the "TRUSTED DEVICES"
field. To cancel connection setting, tap the host
name and [Forget]. Until "Forget" is tapped, the
connection setting retains even if you connect/
disconnect repeatedly by coming in and out of a WiFi area.
･ If the privacy separator function for Wi-Fi network
(access point) is enabled, pair setting cannot be
made.
Using Media Go
The Media Go computer application helps
you transfer and manage media content in
the terminal and PC.
With Media Go, you can load music from a CD
to a PC and transfer to the terminal.
･ You can install Media Go from PC Companion.
Activate PC Companion installed in a PC and
install Media Go with "Sony PC Companion"
screen. For information on how to install PC
Companion, see "When PC Companion is not
installed on your PC" (P.236).
The Bluetooth function creates a wireless
connection to other Bluetooth devices, for
example, handsfree devices. A range within
10 meters, with no solid objects in between,
is recommended. You must turn on the
Bluetooth function to communicate with
Bluetooth devices. You may also have to
make pair setting for the terminal and
Bluetooth device.
❖Information
･
By default, Bluetooth function is off. If you turn
Bluetooth on and then turn off the terminal,
Bluetooth function turns off. When you turn on the
terminal again, Bluetooth function turns on
automatically.
･ When you do not use Bluetooth function, turn it off
to save the battery.
❖Information
･
You can also download Media Go from http://
mediago.sony.com/enu/features.
･ To learn more about how to use the Media Go
application, see the help section of the Media Go
application.
File management 154
■
Reception interference caused by
wireless LAN devices
The terminal's Bluetooth function and
wireless LAN devices use the same
frequency band (2.4GHz). If you use the
terminal near a wireless LAN device,
reception interference may occur or the
communications speed may lower. Also,
you may hear noise or have a connection
problem. In these cases, do the following:
･ Keep the Bluetooth device 10 meters or
more away from a wireless LAN device.
･ Within 10 meters, turn off either the
Bluetooth device or the wireless LAN
device.
* The terminal does not communicate
wirelessly with all types of Bluetooth
devices. Bluetooth DUN is not supported.
Making the terminal detectable
with the Bluetooth function on
From the Home screen, tap
then tap [Settings].
Tap
right.
･
in Bluetooth or drag it
appears on the status bar and
Bluetooth function turns on.
Tap [Bluetooth].
Tap [SO-01E].
･
The terminal becomes detectable by
other Bluetooth devices for 2 minutes.
Entering the terminal's name
You can name the terminal. The name
appears on Bluetooth devices when you use
the Bluetooth function.
Make sure that the Bluetooth
function is on.
From the Home screen, tap
Tap
[Settings]u[Bluetooth].
Tap
and tap [Rename phone].
Enter a name.
Tap [Rename].
File management 155
Making pair setting for the
terminal and Bluetooth device
By making pair setting for the terminal and
another Bluetooth device, you can use the
device such as Bluetooth handsfree headset
etc. connecting to the terminal to make and
receive calls.
Once you have made pair setting for the
terminal and a Bluetooth device, the setting
is saved. When making pair setting for the
terminal and a Bluetooth device, you may
need to enter a passkey (PIN). The terminal
automatically tries the generic passkey
"0000". If this passkey does not work, see the
documentation of your Bluetooth device. You
do not need to re-enter the passkey the next
time you connect to a paired Bluetooth
device already set.
You cannot pair the terminal with two
Bluetooth headsets. However, you can pair
the terminal with two or more Bluetooth
devices of different profiles. The terminal
supports the following Bluetooth profiles:
A2DP, AVRCP, HFP, HID, HSP, OPP, PAN, PBAP,
and SPP.
From the Home screen, tap
tap [Settings]u[Bluetooth].
Tap [Search for devices].
Tap a Bluetooth device name to
pair with the terminal.
Check a passkey on the "Bluetooth
pairing request" screen, then tap
[Pair].
･
and
A list of detected Bluetooth devices
appears.
･
You can use the Bluetooth device that
has been paired.
･ Some Bluetooth devices make
connections continuously after making
pair setting.
･ Authentication passcode may be
required on the "Bluetooth pairing
request" screen.
❖Information
･
Make sure that the Bluetooth function and Bluetooth
detection function of the target device are on.
･ When you make pair setting with the Bluetooth
device supporting Secure Simple Pairing (SSP)
function, a passkey appears on the screen. Check the
passkey and make the pair setting.
Make sure that the Bluetooth
function is on.
File management 156
Connecting the terminal with
Bluetooth device
Make sure that the Bluetooth
function is on.
From the Home screen, tap
tap [Settings]u[Bluetooth].
Tap [Search for devices].
and
･
A list of detected Bluetooth devices
appears.
･ Set Bluetooth device pairing as
required.
From the Home screen, tap
tap [Settings]u[Bluetooth].
Tap the connected Bluetooth
device name.
Tap [OK].
･
and
To reconnect, tap the device name.
Canceling the pair setting of a
Bluetooth device
Tap the name of Bluetooth device
you want to connect.
While connecting to a device,
appears in the status bar and the
connection status appears under the
device name.
From the Home screen, tap
tap [Settings]u[Bluetooth].
Tap
in a Bluetooth device name
to unpair and tap [Unpair].
･
❖Information
･
Deactivating the connection of
a Bluetooth device
･
and
Connection disconnects and the pair
setting is canceled.
Tap
on the connected Bluetooth device name to
check the status of that Bluetooth device or change
the settings.
File management 157
Sharing files with DLNA
devices via Connected
devices (Media server)
With Media server, you can share media files
with other client (DLNA: Digital Living
Network Alliance) devices using Wi-Fi
function.
Set Wi-Fi connection (P.112) with another
client device.
❖Information
･
On the Media server screen, tap
connection.
Playing media files in the DLNA
device with the terminal
Set Wi-Fi connection with a DLNA device to
allow access from the terminal in advance.
From the Home screen, tap ,
then tap [Connected devices].
･
Setting Connected devices
(Media server)
From the Home screen, tap ,
then tap [Connected devices].
･
When you activate for the first time,
"Welcome!" screen appears. Tap
or
x.
Tap
･
SO-01E
(server name)
Share content
PENDING
DEVICES
REGISTERED
DEVICES
If the device name appears in the server
list, go to Step 4.
Tap [Wireless & networks] and tap
in Wi-Fi or drag it right.
Tap x.
Tap the device name displayed in
the server list and tap the desired
category folder.
Tap a media file to play it.
, then tap [Media server].
Media server settings screen appears.
You can set the following items.
to set Wi-Fi
･
Go back to "Connected devices" screen.
Rename the terminal (server)
displayed on a client device.
Set to connect from a client device
to the terminal via Wi-Fi.
Manage client devices waiting
access permissions.
Manage client device registered to
the terminal.
File management 158
Playing a media file in the
terminal with a DLNA device
Set Wi-Fi connection on a DLNA device in
advance.
From the Home screen, tap ,
then tap [Connected devices].
Tap , then tap [Media server]
and tap
in Share content or
drag it right.
Tap [OK] and tap
drag it right.
･
in Wi-Fi or
"Media server turned on" appears in the
status bar.
Tap y, tap
Tap a tile you want to play.
Tap , then tap [See all...]u[Play
on device].
･
･
, and tap [Album].
Album list screen appears.
A "Play on device" screen appears.
Tap a device displayed on the "Play
on device" screen.
･
The file is played by a DLNA device.
File management 159
Applications
dmenu
In dmenu, you can easily access sites
recommended by DOCOMO or convenient
applications.
Opening dmenu
From the Home screen, tap
[dmenu].
･
dmarket
You can obtain useful and interesting
contents which meet your needs at dmarket.
Opening dmarket
･
When you activate for the first time, "d
マーケットソフトウェア使用許諾契約書
Browser activates to display "dmenu".
(License Agreement)" appears. Mark
[Agree] checkbox and tap [Start use].
❖Information
･
To use dmenu, Internet connection by packet
communication (LTE/3G/GPRS) or Wi-Fi is required.
･ For connecting dmenu and downloading
applications introduced in dmenu, packet
communication charge is applied separately. Some
applications automatically perform packet
communications.
･ Applications introduced by dmenu may include
charged ones.
From the Home screen, tap
[dmarket].
❖Information
･
For details on dmarket, refer to NTT DOCOMO
website.
Applications 160
Play Store
With Google Play, you can directly access
useful applications or fun games which you
can download and install on the terminal.
And you can send feedback and comments
about an application, or report objectionable
application or incompatible application with
the terminal as an inappropriate content.
･ To use Google Play, you need to set Google
account (P.135).
･ Some applications and games are free of
charge, and the others are paid. In the
applications list of Market, distinction
between free and paid is clearly specified. For
details on purchasing, returning and
refunding of paid applications, see "Help"
(P.162).
Installing applications
･
Check the displayed contents carefully
and follow the onscreen instructions.
･ Be careful especially about applications
which have many functions or access
large amount of data. If you perform
download operation, you are
responsible for the consequences of
using this application on the terminal.
❖Information
･
･
･
･
From the Home screen, tap [Play
Store].
･
When you activate for the first time,
Terms of use window appears. Tap
[Accept].
Search application and tap
application you want to install.
･
Be sure to check the security of application, then
install it at your own risk. The terminal may be
infected with a virus and the data may be damaged.
NTT DOCOMO is not liable for malfunctions, if any,
caused by the application you installed. In such case,
the repair is charged even during the warranty
period.
NTT DOCOMO is not liable for any disadvantage
brought to you or any third party due to an
application you installed.
Some applications automatically perform packet
communications. Packet communication is kept
active unless you disconnect it or the time-out is
occurred. To disconnect packet communication
manually, from the Home screen, tap
and tap
[Settings]u[More...]u[Mobile networks] and unmark
[Data enabled].
Some applications may be updated automatically.
Applications 161
Deleting application
From the Home screen, tap [Play
Store].
Tap
and [My Apps].
Tap the applications you want to
delete, then tap [Uninstall]u [OK].
･
When you uninstall charged
applications, a screen for refund may
appear. For details, refer to "Help"
(P.162).
Help
When you need help or have any questions
about Google Play, display the Google Play
screen, then tap and tap [Help]. The
Browser opens the Google Play Help web
page.
Osaifu-Keitai
Osaifu-Keitai equipped with IC card is a
function which allows you to pay money or
to use coupon, stamp-rally, etc. only by
holding the terminal over an IC card reader in
stores etc.
You can access a site or website, obtain the
latest coupon, check credit or payment of
electronic money, etc. by holding the
terminal over the IC card reader. In addition,
you can lock your Osaifu-Keitai to provide
against loss or theft, and you can use OsaifuKeitai with safe.
For details on Osaifu-Keitai, refer to " ご利用ガ
イドブック (sp モード編 ) (Mobile Phone User's
Guide [sp-mode]) (in Japanese only)".
* A setting from the dedicated website or
application is required to use Osaifu-Keitai
compatible services.
Applications 162
Precautions on using Osaifu-Keitai
･
The data (including electronic money, points,
etc.) in the IC card may be lost or modified
because of the malfunction of the terminal
(When we take your Osaifu-Keitai for repair
etc., as we cannot take it with data remained,
you are required to erase the data by
yourself ). For support such as reissuance,
restoration, temporary preservation or
transfer of data, contact Osaifu-Keitai
compatible service providers. For important
data, be sure to use a service with backup
service.
･ If the data in the IC card is lost, modified or
damaged by any means related to OsaifuKeitai compatible service such as malfunction
or model change, DOCOMO assumes no
responsibility for the loss of data.
･ If the terminal is stolen or misplaced,
immediately contact Osaifu-Keitai
compatible service provider for an advice.
･ The terminal does not support iC transfer
service.
Using Osaifu-Keitai
From the Home screen, tap
then tap [Osaifu-Keitai].
Select a service you want to use
from a service list.
･
At the first time you activate OsaifuKeitai, an initial setting screen appears.
Follow the onscreen instructions.
Holding Osaifu-Keitai over IC
card reader
You can exchange data with an IC card reader
only by holding mark over the card reader.
･
When holding mark over an IC card reader,
make sure not to hit the terminal strongly.
･ Hold
mark horizontally over the center of
the IC card reader.
･ Slowly move the terminal to hold
mark
over the IC card reader.
･ If
mark is not recognized even when
holding over the IC card reader, try slightly
picking the terminal up off the reader, or
moving the terminal back, forth and around.
･ If there are metal objects between
mark
and an IC card reader, scanning may be failed.
Applications 163
And note that a sticker put on nearby the
mark may affect communication
performance.
❖Information
･
･
❖Information
･
You can scan and write data to or from an IC card
reader without activating Osaifu-Keitai compatible
application.
･ The function is available even if the terminal is off,
but it is not available when the battery pack is not
attached. Even if the battery pack is attached, the
function may not be available when you leave the
terminal off for a long time or the battery level is low,
etc.
Locking Osaifu-Keitai function
Use "Osaifu-Keitai Lock Setting" to restrict the
use of Osaifu-Keitai function and related
services.
･ Osaifu-Keitai lock is different from screen lock
for the terminal, SIM card lock.
From the Home screen, tap
then tap [Osaifu-Keitai].
Tap [Lock Settings] at the bottom
right of the "Osaifu-Keitai" screen.
Follow the onscreen instructions
to enter unlock pattern.
･
･
･
is displayed in the status bar when you set
"Osaifu-Keitai Lock Setting".
Note that you cannot cancel "Osaifu-Keitai Lock
Setting", if the battery runs out while using "OsaifuKeitai Lock Setting". Be careful about remaining
battery level. If the battery runs out, charge the
terminal before canceling "Osaifu-Keitai Lock
Setting".
You need to enter unlock pattern to use Osaifu-Keitai
menu while using "Osaifu-Keitai Lock Setting".
IC card unlock pattern will not be deleted even if you
reset the terminal.
Note that you cannot cancel "Osaifu-Keitai Lock
Setting" if you forget both the lock pattern and
answer for security question.
iD 設定アプリ (iD setting
application)
"iD" is a convenient electronic money by
credit clearance scheme. You can enjoy
shopping simply and conveniently only by
holding Osaifu-Keitai with credit information
set or the iD-compatible card over the IC card
reader in stores. Because up to 2 types of
credit information can be registered in
Osaifu-Keitai, you can use them according to
the benefits, etc. It also supports cashing,
depending on the card issuer.
･ To use iD with Osaifu-Keitai, subscribing to a
card issuer that supports iD, settings for iD
setting application are required.
Applications 164
･
The charges required for iD service (including
the annual charge) vary by card issuer.
･ For using the application, a packet
communication charge is applied.
･ A packet communication fee for oversea use
differs from the one in Japan.
･ For details on iD, refer to iD website (http://idcredit.com/ (In Japanese only)).
ToruCa
ToruCa is an electronic card that can be
obtained to mobile terminals. It can be
obtained from the IC card reader or site as
store information, coupon ticket, etc.
Obtained ToruCa is saved to the "ToruCa"
application. Use the "ToruCa" application to
display, search or update.
For details on ToruCa, refer to " ご利用ガイド
ブック (sp モード編 ) (Mobile Phone User's
Guide [sp-mode]) (in Japanese only)".
･
･
･
･
･
･
･
･
Some ToruCa which can be displayed in a map from
ToruCa (details) may not be displayed in a map from
the ToruCa list depending on the IP settings.
While using Osaifu-Keitai Lock Setting, you cannot
obtain ToruCa with an IC card reader.
If you mark 重複チェック (Duplication check),
obtaining the same ToruCa redundantly is not
available. To obtain the same ToruCa redundantly,
unmark 重複チェック (Duplication check).
When you send ToruCa attaching to email, it is sent
in the condition before obtaining ToruCa (details).
Depending on email application, ToruCa received via
the emails may not be saved.
Depending on browser, ToruCa cannot be obtained.
When ToruCa is moved/copied to the microSD card,
it is moved/copied in the condition before obtaining
ToruCa (details).
You may not be able to obtain ToruCa with an IC card
reader, if you do not make initial setting for OsaifuKeitai.
❖Information
･
For obtaining, displaying or updating ToruCa, a
packet communication charge may be applied.
･ Some ToruCa provided to i-mode terminal may not
be obtained/displayed/updated.
･ Depending on the settings of IP (Information
Provider), the following functions may not be
available.
- Obtaining/Updating from the IC card reader,
sharing ToruCa, moving to microSD card, copying/
displaying map
Applications 165
3
FM radio
You can listen to the FM radio with the
terminal. Tuning can be made automatically
or manually, and you can register your
favorite channels to Favorites. To use FM
radio, use a handsfree device such as Stereo
Headset with Microphone (Sample), etc. or a
headphone. They work as antenna.
･
Alternatively, tap
to search for channels.
･ The search ends when radio waves are
received.
Tap
, then tap [+ Add XX.X
to favorites].
Tap entry box, enter a name and
tap [Save].
･
Searching and registering
channels
Connect Stereo Headset with
Microphone (Sample) to the
terminal.
･
･
The frequency bands of searched
channels are registered to Favorites.
To stop the FM radio, tap
❖Information
･
For connection of Stereo Headset with
Microphone (Sample), see "Using
Stereo Headset with Microphone"
(P.188).
From the Home screen, tap
then tap [FM radio].
Tap , then tap [Search for
channels].
FM radio screen appears and selecting
channel starts automatically. You can
select channel by flicking the screen left
and right. To select channel
automatically furthermore, go to Step 3.
You can return to the Home screen to perform
another operation while listening to FM radio in the
background. To return to the FM radio screen, from
the Home screen, tap
then tap [FM radio], or drag
the status bar downward and tap [FM radio] on the
Notification panel.
･ When the docomo mini UIM card is not inserted, the
frequency band range is 87.5MHz - 108.0MHz. You
cannot listen to the FM radio programs in Japan.
Applications 166
■
FM radio screen
de
Monaural/stereo effect
Play in speaker/Play in handsfree
Channel point displayed in a good radio wave
condition
d On/Off of FM radio
e Posting "Like" in Facebook
･ "Like" appears if you log in to Facebook.
f View optional menu
g Broadcasting station now listening
h Channel assigned to favorite
i Search channels automatically
j Move left to select next favorite
k Favorites saving/editing/tuning
l Move right to select next favorite
Switching the speaker and
handsfree device
On the FM radio screen, tap .
Tap [Play in speaker]/[Play in
headphones].
･
The sound output is switched to the
speaker/handsfree device.
Camera
You can shoot still picture and video by
tapping the shutter icon or screen or using
the camera key (k). You can hold the
camera horizontally or vertically to shoot still
pictures (when shooting with 3D Sweep
Panorama/Sweep Multi Angle/Sweep
Panorama, hold the camera horizontally). For
recording videos, screen display supports
landscape only. Still pictures and videos are
saved automatically in the internal storage or
a microSD card.
Applications 167
Before using the camera
･
All pictures or videos that you capture on the
terminal are stored into the internal storage or
a microSD card. When saving to a microSD
card, insert a microSD card before using the
camera. You cannot take a photo while the
terminal is reading/writing data, for example
transferring a file from Media Go.
･ If you use microSD card with an i-mode
compatible terminal, photos and videos shot
by the terminal cannot be shown.
･ Avoid copyright infringements when you
handle photos, videos, or sound recorded
using the terminal, e.g. copy/edit. In addition,
avoid rights infringements of portraits by
using these photos without consent, altering
them or by other means. Note that capturing
or recording a stage performance,
entertainment or exhibition may be
prohibited even if for personal use.
■
About the Copyright and Portrait rights
Objects, such as movies, still images, and sounds,
recorded using the terminal are prohibited by the
copyright law from use without consent of the
copyright holders, unless intended for personal use
or any other purpose permitted by law. Also, using
or transformation of other person's portrait or
name without his or her permission may violate the
portrait right. When you present recorded images
or sounds in a public place such as on an Internet
home page, make sure to be aware of the copyright
and portrait right. Note that some performances,
shows, and exhibitions may not allow
photography, movie shooting, or sound recording
even for personal use. Transmission of images
related to copyright or beyond the scope provided
in the copyright law is not available.
Please be considerate of the privacy of
individuals around you when taking and
sending photos using camera-equipped
mobile phones.
If you cause the public any trouble using the
terminal, you may be punished under law or
regulations (for example, nuisance
prevention ordinance).
Applications 168
Note on 3D Sweep Panorama/Sweep
Multi Angle/Sweep Panorama
･
In the following cases, 3D Sweep Panorama/
Sweep Multi Angle/Sweep Panorama do not
work properly.
- Shooting a moving object
- Shooting the main object that is too close to
the camera
- Shooting an object with repetition of the
same pattern such as a sky, beach, grass, etc.
- Shooting a big object
- Shooting an object with constantly
changing pattern such as a wave, waterfall,
etc.
･ If shooting angle does not increase enough
for 3D Sweep Panorama/Sweep Multi Angle/
Sweep Panorama within a certain period of
time, the part which was not taken is recorded
in gray.
To avoid this, move the camera faster when
shooting.
･ Because two or more images are joined
together, joints may not recorded smoothly.
･ Images may be blurred or may not be taken in
a dark scene.
･ Under the flickering light source such as a
fluorescent light, you may not be able to
shoot properly since brightness or color
balance of joined image may be unstable.
･
If brightness, color balance and focus point of
whole image to be taken with 3D Sweep
Panorama/Sweep Multi Angle/Sweep
Panorama are radically different from those of
the focused image, image may not be shot
properly.
･ In the following cases, shooting for 3D Sweep
Panorama/Sweep Multi Angle/Sweep
Panorama may be stopped.
- Moved the camera too fast/too slow
- Blurred too much
- Moved the camera in the opposite direction
of the shooting
Notes on viewing pictures shot with
3D Sweep Panorama/Sweep Multi
Angle
･
Do not view 3D images shot by the terminal
with a 3D compatible monitor for a long time.
Doing so may cause unpleasant symptom
such as eyestrain, fatigue, feeling ill, etc.
･ For viewing 3D images, you are
recommended to take a proper break.
Necessary break length or frequency varies by
individual. Judge for yourself.
･ When you experience unpleasant symptom,
stop viewing 3D images until you get healed
up and seek the advice of a doctor if
necessary. Also refer to the manuals come
with the device for connecting to the terminal
or software.
Applications 169
･
Vision of child (especially younger than 7
years) is during development. Before a child
views 3D images, seek the advise of a doctor
such as pediatrics or ophthalmologist. Adults
should supervise a child for the above
precautions.
Shooting screen and key
operations
■
Still picture shooting screen
d e
Display area of status icons showing selected
settings
e Switch icon for photo/video
f Navigation bar
g Shutter (still picture)
Start/Stop recording (video)
h Recent shooting history
･ Touch the icon on the shooting screen and flick it
to the left of the screen (up when in portrait view)
to display the last 5 shots.
･ Tap to open viewing/playback screen for still
pictures and videos.
･ Tap the icon displayed by touching and holding
to perform the following operations.
: View playback screen of photos and videos
: Share
: Delete
❖Information
･
On the shooting screen, pinch out/in or press
m to zoom in/out.
･ To end the camera, tap Navigation bar, then tap
x.
g h
■
Video shooting screen
g h
Capturing mode icon
Display area of icons showing selected settings
Icons showing set items
Applications 170
frame turns green and sound beeps.
The photo is taken as soon as you
release the finger. If the focus frame
turns red, auto-focus does not operate
correctly.
Shooting still pictures
Shooting a still picture
Tap the shutter icon ( ) or screen, or use
camera key (k) to shoot a still picture.
Shot still pictures are automatically saved in
the internal storage/microSD card.
■ Using the camera key (k)
On the shooting screen, press k.
･ Even if "Capturing method" (P.181) is set
From the Home screen, press and
hold k for over a second.
･
to "On-screen button" or "Touch
capture", you can press k to shoot.
･ To take a photo using auto-focus
function, press k half way and
when the focus frame turns green,
press k the rest of the way down
until it stops. If the focus frame turns
red, auto-focus does not operate
correctly. Press k halfway again.
The still picture shooting screen (P.170)
appears.
■ Tapping the shutter icon (
Tap the shutter icon ( ) on the shooting
screen.
･ To take a photo using auto-focus
function, touch and hold the shutter
icon ( ) and release your finger when
the focus frame turns green and sound
beeps. The photo is taken as soon as
you release the finger. If the focus frame
turns red, auto-focus does not operate
correctly.
■ Tapping the screen
On the shooting screen, tap
u[Capturing method]u[Touch
capture]uTap the screen.
･ To take a photo using auto-focus
function, touch and hold the screen
and release your finger when the focus
❖Information
･
When you connect Stereo Headset with Microphone
(Sample), commercially available earphone set or
other Bluetooth device, shutter sound may be softer.
Shooting using Quick launch
On the SIM/screen unlock screen,
press and hold k for over a
second.
･
The camera is activated to shoot a
photo immediately. Shot pictures are
automatically saved in the internal
storage/microSD card.
Applications 171
❖Information
･
"Quick launch" (P.181) is set to "Launch and capture"
by default. The operation of Quick launch can be
selected from "Launch and capture", "Launch only",
and "Off". When "Quick launch" is set to "Off",
pressing and holding k for over a second on the
SIM/screen unlock screen does not activate the
camera.
Using zoom
On the shooting screen, press
m.
❖Information
･
On the shooting screen, pinch in/out the screen to
zoom out/in.
･ Zoom is not available while using Front camera/3D
Sweep Panorama/Sweep Multi Angle/Sweep
Panorama.
Face detection
You can use face detection to bring an offcenter face into focus. The camera
automatically detects up to 5 faces at a time.
A yellow frame indicates a face to focus on,
and white frames indicate the rest. An
appropriate face is determined by distance
from the camera and off-center balance, and
is focused automatically. You can also tap one
of the frames to select which face should be
in focus.
Setting face detection
･
Adjusting Exposure value
On the shooting screen, tap the
shooting mode icon (P.170), then
tap [Normal].
On the shooting screen, tap
then [Exposure value].
Tap or drag the bar to adjust the
exposure value.
From the Home screen, press and
hold k for over a second.
The still picture shooting screen (P.170)
appears.
On the shooting screen, tap the
shooting mode icon (P.170), then
tap [Normal].
On the shooting screen, tap ,
then tap "Focus mode" (P.179).
Tap
(Face detection).
❖Information
･
"Scenes" (P.177) is set to "Landscape"/"Night scene"/
"Document", Face detection cannot be used.
Applications 172
Taking a photo using face detection
With Face detection set, point the
camera at the subject.
･
From the Home screen, press and
hold k for over a second.
･
Each detected face is framed (up to 5
faces).
Tap the frame you want to focus on
or let the camera select which face
to focus on without tapping.
･
Setting smile detection
On the shooting screen, tap ,
then tap "Smile detection" (P.179).
･
A yellow frame shows the face in focus.
Shoot a picture.
･
For information on how to shoot
pictures, see "Shooting a still picture"
(P.171).
･ Shot pictures are automatically saved in
the internal storage/microSD card.
You can select smile level for the smile
detection feature from "Big smile"/
"Average smile"/"Small smile"/"Off". Set
"Off" to cancel smile detection.
Taking a photo using smile detection
With Smile detection set, point the
camera at the subject.
･
Each detected face is framed (up to 5
faces).
･ The camera selects which face to focus
on. A yellow frame shows the face in
focus.
Smile detection
Smile detection allows you to capture a face
just as it smiles. The camera detects up to 5
faces and selects 1 face for smile detection
and auto focus. A yellow frame shows which
face is selected. When the selected face
smiles, the frame turns to green and the
camera automatically takes a photo.
The still picture shooting screen (P.170)
appears.
The camera automatically takes
the photo when the subject in
focus smiles.
･
Shot pictures are automatically saved in
the internal storage/microSD card.
･ If no smile is detected, operate the
steps in "Shooting a still picture" (P.171)
to shoot a picture.
Applications 173
Changing capturing mode
From the Home screen, press and
hold k for over a second.
･
The still picture shooting screen (P.170)
appears.
On the shooting screen, tap the
capturing mode icon (P.170), then
select capturing mode.
Capturing mode
Item
Icon
Description
Capturing Select the shooting method.
mode
Scene The camera determines
recognition most suitable scene effect.
A corresponding scene
icon appears when the
scene is recognized.
Normal A standard shooting
mode.
Front
P.174
camera
P.175
3D
Sweep
Panorama
Sweep
Multi Angle
Sweep
Panorama
Using Front camera to shoot
pictures
From the Home screen, press and
hold k for over a second.
･
The still picture shooting screen (P.170)
appears.
On the shooting screen, tap the
shooting mode icon (P.170), then
tap [Front camera].
Shoot a picture.
･
For information on how to shoot
pictures, see "Shooting a still picture"
(P.171).
❖Information
･
For using Front camera, "Resolution", "Self-timer",
"Smile detection", "Geotagging", "Capturing method",
"Data storage" can be set. Other "Still camera setting"
(P.177) are not supported by Front camera.
- "Resolution" can be selected from "1MP 16:9", "1MP
4:3" for Front camera.
- The settings other than "Resolution" take over the
camera settings set at the time when switching.
Applications 174
Using Sweep Panorama
Use Sweep Panorama to shoot panoramic
image with wide angle.
Aligning the white frame on the screen with
the black frame, move the camera slowly
toward the set shooting direction to shoot.
Using 3D Sweep Panorama allows you to
shoot 3D pictures.
･ Photos shot with 3D Sweep Panorama cannot
be displayed in 3D on the terminal. View them
with a 3D compatible monitor using a
microSD card etc.
･ Photos shot with Sweep Multi Angle can be
viewed three-dimensionally by tilting the
terminal left and right.
Setting 3D Sweep Panorama/Sweep
Multi Angle/Sweep Panorama
From the Home screen, press and
hold k for over a second.
･
The still picture shooting screen (P.170)
appears.
On the shooting screen, tap the
shooting mode icon (P.170), then
tap [3D Sweep Panorama]/[Sweep
Multi Angle]/[Sweep Panorama].
･
Tap
to select "On" or "Off" for "Photo
light" (P.181).
･ For 3D Sweep Panorama, tap
to
select "Panorama image size" (P.178).
･ For Sweep Panorama, tap
to select
"Shooting direction" (P.181).
Applications 175
Using 3D Sweep Panorama/Sweep
Multi Angle/Sweep Panorama to
shoot pictures
With 3D Sweep Panorama/Sweep
Multi Angle/Sweep Panorama set,
point the camera at the subject.
Shoot a still picture.
･
For information on how to shoot
pictures, see "Shooting a still picture"
(P.171).
･ A white frame and big black frame
appear on the screen.
Changing the recording
settings
･
The still picture shooting screen (P.170)
appears.
On the shooting screen, tap
then tap item to set.
･
Several setting icons are displayed on
the shooting screen in advance. The
displayed setting icons change
depending on the setting conditions.
･ While using 3D Sweep Panorama/
Sweep Multi Angle/Sweep Panorama,
tap the setting item icon displayed on
the shooting screen to change the
setting.
･ For setting items and icons, see "Still
camera setting" (P.177).
Aligning the white frame with the
black frame, slowly move the
camera from left to right.
･
If you change shooting direction for
Sweep Panorama, slowly move the
camera in the set direction.
･ Shot pictures are saved automatically in
the internal storage/microSD card.
From the Home screen, press and
hold k for over a second.
Tap an option in the selected
setting.
･
If you change setting options, icons
displayed on the shooting screen
change to the set items.
Applications 176
❖Information
Still camera setting
･
On the recording screen, tap
to display setting
items. If you touch and hold an item and then drag it
to the area where setting item icons are displayed,
you can replace displayed icons on the recording
screen.
･ To delete a setting item icon displayed on the
recording screen, touch and hold a setting item icon
and drag to
displayed in the center of the
screen.
･ Capturing mode icons and setting icons (P.170)
cannot be replaced or deleted.
･ Setting item icons cannot be changed or deleted
while using Front camera/3D Sweep Panorama/
Sweep Multi Angle/Sweep Panorama.
Item
Scenes
Icon
Description
Use Scenes to quickly set up the camera
for various scene conditions. Use when
"Capturing mode" is set to "Normal".
OFF
Adjust color shade or
brightness automatically.
Portrait Settings are optimized to
give brighter and warmer
skin tones.
Shoot landscape
Landscape depicting trees with vivid
color and focusing on
distant objects.
Night
Shoot a crisp and clear
scene
night scene. Due to long
exposure time, be careful
not to shake camera.
Night
Suitable for shooting
portrait
persons against the
nightscape background.
Due to long exposure
time, be careful not to
shake camera.
Beach Reconstruct beach and
and snow
snowy scene brightly and
vividly.
Sports To shoot fast-moving
object, shorten exposure
time to minimize motion
blurring.
Applications 177
Item
Scenes
Icon
Party
Description
Shoot an indoor picture
creating good
atmosphere of indoor
lighting. Due to long
exposure time, be careful
not to shake camera.
Use for shooting text or
Document graphics. It allows to
capture a clear, bright, and
easy to read text.
Resolution Select image sizes and aspect ratios
before shooting. An image with a higher
resolution requires more memory.
13MP
13 megapixel image size
4:3
with 4:3 aspect ratio.
Suitable for viewing on
normal size screen or
printing in high
resolution.
10MP
10 megapixel image size
16:9
with 16:9 aspect ratio. A
high resolution widescreen format. Suitable for
viewing on wide-screen.
2MP
2 megapixel image size
4:3
with 4:3 aspect ratio.
Suitable for viewing on
normal size screen.
2MP
2 megapixel image size
16:9
with 16:9 aspect ratio.
Suitable for viewing on
wide-screen.
Item
Resolution
Icon
1MP
Description
1 megapixel image size
16:9
with 16:9 aspect ratio. Use
when "Capturing mode" is
set to "Front camera".
1MP
1 megapixel image size
4:3
with 4:3 aspect ratio. Use
when "Capturing mode" is
set to "Front camera".
Panorama Set image size for 3D Sweep Panorama
image size Use when "Capturing mode" is set to "3D
Sweep Panorama".
16:9
16:9 aspect ratio. Suitable
for viewing on widescreen.
Standard size for
Panorama image. Suitable
Standard
for Panorama shooting.
Flash
Set whether to turn on the flash when
shooting in the place where lighting
conditions are poor or there is a
backlight. Use when "Capturing mode" is
set to "Normal"/"Scene recognition".
Auto
Turn on the flash
automatically according
to the brightness.
Fill flash Always turn on the flash
regardless of the
brightness.
Red-eye Reduce red-eye effect
reduction
caused by the flash.
Applications 178
Item
Flash
Self-timer
Smile
detection
Icon
Off
Description
The flash does not turn
on.
･ Sometimes still picture
quality can be better
without the flash. When
you do not turn on the
flash, use the self-timer
to avoid blurring still
picture.
Use it to take self-portraits, or group
photos where everyone can be in the
photo. You can also use the self-timer to
avoid camera shake.
On
Tap or press k to
(10 sec.)
shoot 10 seconds later.
On
Tap or press k to
shoot 2 seconds later.
(2 sec.)
Off
Tap or press k to
shoot immediately.
Shoot faces at the moment they smile.
The camera detects up to 5 faces and
selects 1 face for smile detection and
auto focus. When the selected face
smiles, the camera automatically shoots.
･ You can select smile level for the smile
detection feature.
Big
Shoot when a big smile is
smile
detected.
Average Shoot when a smile is
smile
detected.
Small Shoot when even a tiny
smile
smile is detected.
Off
Cancel smile detection.
Item
Focus
mode
Exposure
value
ISO
Icon
Description
Set focus controls. Use when "Capturing
mode" is set to "Normal".
Single The camera automatically
autofocus
focuses on the subject.
Multi
The camera automatically
autofocus
focuses on several points
on the shooting screen.
The white focus frames
turn to green if focused
on.
Face
P.172
detection
Touch Tap an object on the
focus
shooting screen. The
focus frame moves onto
the tapped place.
P.172
Set ISO sensitivity. Shoot clear picture
reducing blur even in a place where
lightning is poor. Use when "Capturing
mode" is set to "Normal".
Auto Set to the appropriate
sensitivity between "100"
and "800".
100
Set sensitivity to 100.
200
Set sensitivity to 200.
400
Set sensitivity to 400.
800
Set sensitivity to 800.
Applications 179
Item
White
balance
Icon
Description
The white balance setting adjusts the
color balance according to the light
source. Use when "Capturing mode" is
set to "Normal".
Auto
Adjust the color balance
automatically to the light
source.
Adjust the color balance
Incandescent for lighting like
incandescent bulb.
Adjust the color balance
Fluorescent for lighting like
fluorescent.
Daylight Adjust the color balance
for a sunny place.
Cloudy Adjust the color balance
for a cloudy sky or shaded
area.
Item
Metering
Image
stabilizer
Icon
Description
Measure the brightness on the shooting
screen to determine a well-balanced
exposure automatically. Use when
"Capturing mode" is set to "Normal".
Center Put emphasis at the
center of the shooting
screen and measure
photometry at whole
view finder to adjust the
exposure.
Average Adjust the exposure
based on the brightness
of the whole shooting
screen.
Spot
Measure photometry only
at the center of the
shooting screen to adjust
the exposure.
Compensate for photo blur caused by
small movements of the hand while
shooting. Use when "Capturing mode" is
set to "Normal".
On
Reduce blur.
Off
The stabilizer is not used.
Applications 180
Item
Icon
Description
Geotagging Tag photos location information for the
shooting spot.
Enable "Enabling Wireless networks to
find position" (P.204) or "Enabling GPS
function" (P.204) in the location
information service to add Geotag. For
details on location information, see
"Location services" (P.202).
･ Geotag (location information) enables
to specify the shooting spot of the
photo.
On
Location information is
added to the taken photo.
Off
Shooting location cannot
be viewed on a map.
Capturing Set the shooting method.
method
Set whether to tap the
On-screen shutter icon on the
shooting screen or press
button
k to shoot.
Touch
Set whether to tap the
capture
shooting screen or press
k to shoot.
Set to enable shooting by
Camera key pressing k.
only
Item
Shooting
direction
Icon
Description
Set shooting direction for Sweep
Panorama. Use when "Capturing mode"
is set to "Sweep Panorama".
Right
Shoot moving the camera
from left to right.
Left
Shoot moving the camera
from right to left.
Down Shoot moving the camera
downward.
Up
Shoot moving the camera
upward.
Photo light Use the photo light to shoot when
lighting conditions are poor or in
backlight. Use when "Capturing mode" is
set to "3D Sweep Panorama", "Sweep
Multi Angle", or "Sweep Panorama".
On
The photo light turns on.
Off
The photo light does not
turn on.
Quick
On the SIM/screen unlock screen, press
launch
and hold k for over a second to
activate the camera. Use when
"Capturing mode" is set to "Normal"/
"Scene recognition".
Launch Activate the camera to
and capture shoot a photo
immediately.
Launch Activate the camera.
only
Off
Cancel quick launcher.
Applications 181
Item
Data
storage
■ Tapping the screen
Icon
Description
Set the saving location for shot images.
Internal Save shot images in the
storage
internal storage.
SD card Save shot images in a
microSD card.
On the recording screen, tap
u"Capturing method"u"Touch
capture"uTap the screen to start
recordinguTap the screen to stop
recording.
■ Using camera key (k)
❖Note
･
On the recording screen, press k to
start recordinguPress k to stop
recording.
･ Even if "Capturing method" (P.186) is set
to "On-screen button" or "Touch
capture", you can press k to start/
stop recording.
Some settings cannot be used in combination with
one another.
Recording videos
Recording
Tap the start recording ( )/stop recording ( )
icon or recording screen, or use camera key
(k) to record video. For video recording
screen, only landscape screen is supported.
Recorded data is automatically saved in the
internal storage/microSD card.
From the Home screen, press and
hold k for over a second.
･
Tap
on switch icon for photo/video
(P.170) to display the video recording
screen.
■ Tapping the start recording (
)/stop
recording ( ) icon
On the recording screen, tap to start
recordinguTap to stop recording.
❖Information
･
Do not cover the microphone with fingers etc. when
recording videos.
･ When you connect Stereo Headset with Microphone
(Sample), commercially available earphone set or
other Bluetooth device, shutter sound may be softer.
Using Front video camera to record
On the recording screen, tap the
recording mode icon (P.170), then
tap [Front video].
Start/Stop recording.
･
For information on how to start/stop
recording, see "Recording" (P.182).
Applications 182
･
❖Information
･
For using Front video camera, "Video resolution",
"Self-timer", "Geotagging", "Microphone", "Capturing
method", "Data storage" can be set. Other "Video
camera setting" (P.184) are not supported by Front
video camera.
- The settings take over the video settings set at the
time when switching (if "Video resolution" is set to
"Full HD", the video size is changed to "HD 720p").
･
If you change setting options, icons
displayed on the shooting screen
change to the set items.
･
On the recording screen, tap
then [Exposure value].
Tap or drag the bar to adjust the
exposure value.
Changing the recording
settings
On the recording screen, tap
to display setting
items. If you touch and hold an item and then drag it
to the area where setting item icons are displayed,
you can replace displayed icons on the recording
screen.
･ To delete a setting item icon displayed on the
recording screen, touch and hold a setting item icon
and drag to
displayed in the center of the
screen.
･ Capturing mode icons and setting icons (P.170)
cannot be replaced or deleted.
From the Home screen, press and
hold k for over a second.
･
Tap an option in the selected
setting.
❖Information
Adjusting Exposure value
For setting items and icons, see "Video
camera setting" (P.184).
Tap
on switch icon for photo/video
(P.170) to display the video recording
screen.
On the shooting screen, tap
then tap item to set.
･
Several setting icons are displayed on
the shooting screen in advance. The
displayed setting icons change
depending on the setting conditions.
Applications 183
Video camera setting
Item
Scenes
Icon
Description
Use Scenes to quickly set up the camera
for various scene conditions.
Off
Adjust color shade or
brightness automatically.
Portrait Settings are optimized to
give brighter and warmer
skin tones.
Shoot landscape
Landscape depicting trees with vivid
color and focusing on
distant objects.
Night
Suitable for dark places.
Beach Reconstruct beach and
and snow
snowy scene brightly and
vividly.
Sports To record fast-moving
object, shorten exposure
time to minimize motion
blurring.
Party
Shoot an indoor picture
creating good
atmosphere of indoor
lighting.
Item
Video
resolution
Icon
Description
Full HD Full wide HD format with
16:9 aspect ratio.
1920×1080 pixels
Use when "Capturing
mode" is set to "Video
camera".
HD
HD format with 16:9
720p
aspect ratio.
1280×720 pixels
VGA
VGA format with 4:3
aspect ratio.
640×480 pixels
Photo light Use the photo light to record when
lighting conditions are poor or in
backlight.
On
The photo light turns on.
Off
The photo light does not
turn on. Sometimes the
video quality can be
better without a photo
light, even if lighting
conditions are poor.
Recording a good video
without using the photo
light requires a steady
hand.
Applications 184
Item
Self-timer
Focus
mode
Exposure
value
White
balance
Icon
Description
Use it to record group videos where
everyone can be in the video.
On (10 Tap or press k to start
recording 10 seconds
sec.)
later.
On (2
Tap or press k to start
sec.)
recording 2 seconds later.
Off
Tap or press k to start
recording immediately.
Single The camera automatically
focuses on the subject.
autofocus
Face
P.172
detection
P.183
The white balance setting adjusts the
color balance according to the light
source.
Auto
Adjust the color balance
automatically to the light
source.
Adjust the color balance
Incandescent for lighting like
incandescent bulb.
Adjust the color balance
Fluorescent for lighting like
fluorescent.
Daylight Adjust the color balance
for a sunny place.
Cloudy Adjust the color balance
for a cloudy sky or shaded
area.
Item
Metering
Image
stabilizer
Icon
Description
Measure the brightness on the shooting
screen to determine a well-balanced
exposure automatically.
Center Put emphasis at the
center of the shooting
screen and measure
photometry at whole
view finder to adjust the
exposure.
Average Adjust the exposure
based on the brightness
of the whole shooting
screen.
Spot
Measure photometry only
at the center of the
shooting screen to adjust
the exposure.
Compensate for movements of the
camera while recording a video.
On
Reduce blur.
Off
The stabilizer is not used.
Applications 185
Item
Icon
Description
Geotagging Tag videos location information for the
shooting spot.
Enable "Enabling Wireless networks to
find position" (P.204) or "Enabling GPS
function" (P.204) in the location
information service to add Geotag. For
details on location information, see
"Location services" (P.202).
･ Geotag (location information) enables
to specify the shooting spot of the
video.
On
Location information is
added to the shot video.
Off
Shooting location cannot
be viewed on a map.
Microphone Select whether to pick up the
surrounding sound when recording
videos.
On
Pick up the surrounding
sound when recording
videos.
Off
Do not pick up the
surrounding sound when
recording videos.
Item
Icon
Description
Capturing Set the shooting method.
method
Set to start/stop recording
On-screen videos by tapping the
record starting/stopping
button
icon or pressing k.
Touch
Set to start/stop recording
capture
videos by tapping the
recording screen or
pressing k.
Set to start/stop recording
Camera key by pressing k.
only
Data
Set the saving location for recorded
storage
videos.
Internal Save recorded videos in
storage
the internal storage.
SD card Save recorded videos in a
microSD card.
❖Note
･
Some settings cannot be used in combination with
one another.
Applications 186
Playing multimedia
content
Photos or videos that you took with the
terminal or multimedia contents (music,
photos, videos, etc.) saved in the internal
storage or microSD card are viewed/played in
"Media Player", "WALKMAN", "Albums", etc.
The terminal can play the following
multimedia contents:
Type
Sound
Still
image
Video
File format
WAV (PCM, G.711) (.wav), AAC (.3gp, .m4a,
.mp4), AAC+ (.3gp, .m4a, .mp4), eAAC+
(.3gp, .m4a, .mp4), MP3 (.mp3), AMR-NB
(.3gp), AMR-WB (.3gp), MIDI (SP-MIDI/GM/
GML (.mid), XMF (.xmf ), Mobile XMF 1.0
(.mxmf ), RTTTL/RTX (.rtttl, .rtx), OTA (.ota),
iMelody (.imy)), Ogg Vorbis (.ogg), FLAC
(.flac), PIFF (.isma)
JPEG (.jpeg, .jpg), GIF (.gif ), PNG (.png), BMP
(.bmp), WEBP (.webp)
H263 (.3gp, .mp4), H264 AVC (.3gp, .mp4),
MPEG-4 SP (.3gp), VP8 (.webm, .mkv), Xvid
(.avi), Quicktime (.mov), PIFF (.ismv)
Copyright protected content
Avoid copyright infringements when you
handle photos, videos, or sound recorded
using the terminal, e.g. copy/edit. In addition,
avoid rights infringements of portraits by
using these photos without consent, altering
them or by other means. Note that capturing
or recording a stage performance,
entertainment or exhibition may be
prohibited even if for personal use.
Please be considerate of the privacy of
individuals around you when taking and
sending photos using camera-equipped
mobile phones.
Applications 187
Using Stereo Headset with
Microphone
･
Connect the plug of Stereo
Headset with Microphone
(Sample) to headset connector of
the terminal.
If receiving a call when using Stereo Headset with
Microphone (Sample), music stops, and the ringtone
sounds.
- If receiving a call when using Media player, playing
music resumes by tapping the play key on the
Media player screen after the call ends.
- If receiving a call when using WALKMAN, playing
music resumes when the call ends.
･
Check the connecting direction to
connect correctly. Wrong connection
may cause damage.
Album
Images, photos and videos you took can be
viewed and played. Also, use Media Go to
transfer content to the terminal and to take
content from an external device. For details,
refer to "Using microUSB cable" (P.150).
Viewing photo/video
From the Home screen, tap
then tap [Album].
･
A list of pictures appears.
❖Information
･
❖Information
･
Depending on the number of saved images, it may
take some times to load images.
When you listen to Media Player/WALKMAN/FM
radio with Stereo Headset with Microphone (Sample)
connecting to the terminal, you can switch on/off by
pressing the switch of Stereo Headset with
Microphone (Sample). However, operation may differ
depending on the conditions of use.
Applications 188
■
■
Album screen
Still picture viewing screen
cd
def
Pictures tab
･ Pictures are displayed in a list separated by
months.
b Maps tab
･ Geotagging images appear on a map.
c Show album list
d View optional menu
e Online tab
･ Images in albums in synchronized online services.
Viewing photos
From the Home screen, tap
then tap [Album].
･
A list of pictures appears.
My location info（location information）
･ For geotagged images, tap to view map.
b Shooting date and time
c Back to the image list
d View share menu
e Delete image
f View optional menu
❖Information
･
･
･
Tap a photo.
･
･
The photo is played.
Tap the screen to display information
such as shooting date, option menu
icons, etc.
･
･
appears on an image shot with 3D Sweep
Panorama/Sweep Multi Angle. Tap it and select an
application to play, pause or transfer the image.
Photos shot with 3D Sweep Panorama cannot be
displayed in 3D on the terminal. View them with a 3D
compatible monitor using a microSD card etc.
Photos shot with Sweep Multi Angle can be viewed
three-dimensionally by tilting the terminal left and
right.
Pinch out/in on the photo viewing screen to zoom
in/out image.
The items vary depending on the selected file.
Applications 189
❖Information
Playing video
･
･
From the Home screen, tap
then tap [Album].
A list of pictures appears. icon is
displayed on the video files.
Tap a video and tap
･
Video is played.
Operating image files
Sharing image files
You can share image files by attaching to
Gmail or Email, uploading to Picasa or
Google+, or sending to Bluetooth devices.
Tap an image file to share in the
Album screen.
Tap the screen and
Select sharing method for image
file.
･
･
On the image file list screen, tap , tap [Select
items], then select image file to operate. You can
operate several files as a group.
･ Tap [Play on device] to display the connection device
selection screen (if you do not connect Wi-Fi network
in advance, tap [Settings] to display the setting
screen for Wireless & networks). Select a device
detected on the connection device selection screen,
and tap the device name to play on to share a file
between a DLNA device and the terminal.
･ For shared files, file size and the file type are not
particularly limited, but may be limited by the
application to transfer. DRM content cannot be
shared.
Deleting image files
･
Menu for sharing image file appears.
Tap [See all...] to display all share menus.
On the photo viewing screen/
video playing screen, tap the
screen and tap u[OK].
Image file is deleted.
❖Information
･
On the image file list screen, tap , tap [Select
items], then select image file to delete. You can
delete several files as a group.
･
After this step, follow the onscreen
instructions.
･ The items vary depending on the
selected file.
･ Some items cannot be operated in
some image files.
Applications 190
Using optional menu
View slideshow, edit image, set image to
phonebook entry or as wallpaper, check
shooting date and time, etc.
On the photo viewing screen/
video playing screen, tap the
screen and tap .
From the displayed menu, select
item you want to use.
･
The items vary depending on the
selected file.
･ Some items cannot be operated in
some image files.
YouTube
YouTube is a free online video streaming
service. You can play, search for and upload
videos.
･ A packet communication charge is applied
when downloading or uploading video
content using mobile networks.
Playing YouTube video
From the Home screen, tap
then tap [YouTube].
･
･
YouTube video list screen appears.
You can tap [BROWSE] to select video
from each category.
Tap a video to play it.
･
Tap the screen to display the play
control keys which you can switch Play/
Pause.
･ Double-tap the screen to switch
landscape/portrait.
･ In landscape, drag the marker on the
progress bar at the bottom of the play
screen left or right to change playing
point.
･ Tap x to stop playing and return to
the video list screen.
･ To quit YouTube, tap y.
Applications 191
❖Information
･
For movies with caption function which can display
subtitles, "CC" appears on the playback screen in the
landscape mode. Tap [CC] to set the caption
function.
Playing YouTube videos in high
quality
While playing a video, double-tap
the screen to switch to the
landscape screen.
Tap the screen to display the play
control keys, then tap [HD]/[HQ].
❖Information
･
A video plays in high quality when Wi-Fi is
connected.
･ On the YouTube screen, tap
, then tap
[Settings]u[General] then mark [High quality on
mobile] checkbox to always play video in high
quality even when mobile network is connected.
Searching for a video with
keywords
Tap .
Enter the search keyword.
Tap the displayed candidates list
or
Flick the result up and down and
tap a video you want to play.
Deleting search history
Tap
and tap
[Settings]u[Search].
[Clear search history]uTap [OK].
Applications 192
Connecting the terminal to
TV to watch photos and
videos
This terminal supports MHL connection.
Using TV Dock (optional) you can connect
the terminal to an HDMI compatible TV.
Connect to a TV to display photos and videos
on the TV screen.
･ When connecting the terminal to a TV using
TV Dock, keep charging the terminal with AC
adapter and microUSB cable.
･ Use specified AC adapter (AC adapter 03
(optional) or AC adapter SO02 (optional)).
･ Use an HDMI cable (optional) compatible
with HDMI plug (type A).
･ When using the TV Dock, some functions or
applications of the terminal may not operate
correctly.
Charging with TV Dock
Insert the microUSB cable with the
microUSB plug
engraved side
facing up into the microUSB
connecting jack on the back of the
TV Dock ( ).
Insert the USB plug of the
microUSB cable horizontally into
the USB connecting jack of the AC
Adapter ( ), and insert the AC
Adapter plug to a power outlet.
Align the microUSB connection
jack position of the terminal with
the charging jack of the TV Dock
then insert the terminal ( ).
･
If you do not insert the terminal in
parallel to the charging jack, it may
cause damage.
❖Note
･
Check the connecting direction to connect correctly.
Wrong connection may cause damage.
Applications 193
4
When charging is complete,
remove the terminal from the TV
Dock, and then remove the AC
adapter from the power outlet.
Insert an HDMI cable connector
(type A) into the HDMI connecting
jack on the back side of the TV
Dock ( ), and connect the other
side of the connector to a TV ( ).
Align the microUSB connection
jack position of the terminal with
the charging jack of the TV Dock
then insert the terminal ( ).
･
If you do not insert the terminal in
parallel to the charging jack, it may
cause damage.
･
appear in the status bar then
the terminal is connected to TV.
❖Note
･
The battery cannot be charged by connecting the TV
Dock with a PC.
Connecting to TV with TV Dock
Connect the TV Dock to the AC
adapter with the microUSB cable,
and insert the AC Adapter plug
into the power outlet.
･
Perform Step 1 and 2 of "Charging with
TV Dock" (P.193).
❖Information
･
While MHL is connected, drag the status bar
downward and tap [MHL connected] to make output
settings or check how to use remote controller.
Applications 194
Activating an application by TV
launcher
･
TV launcher screen is activated, then if
you switch the TV to the HDMI input
mode, the screen is displayed on the TV.
･ Also, drag the status bar downwards
and tap [TV launcher] to activate TV
launcher.
Select application using the TV
remote controller.
You can also operate by flicking left and
right or tap on the terminal's screen.
❖Information
･
･
･
･
･
Removing the terminal severs connection, however,
TV may remain to HDMI input mode. Follow the
instructions on the TV to switch to digital terrestrial
television mode, etc.
Connect the terminal to a TV.
･
･
･
Some devices are not compatible with TV remote
controller.
For compatible devices, refer to
http://www.sonymobile.co.jp/support/use_support/
product/so-01e/ (in Japanese only).
On the TV launcher screen, select an album art in
WALKMAN at the upper left to display WALKMAN
screen.
On the TV launcher screen, select [Add] or tap
u[Add] and select the desired shortcut to add to
the TV launcher screen.
On the TV launcher screen, select [Home] to display
the Home screen of the terminal.
Tap u[Rearrange] to rearrange shortcuts on the
TV launcher screen.
Tap u[Delete] to delete shortcuts on the TV
launcher screen.
Media Player
Play back videos and music stored on a
microSD card using Media player.
･ For information on how to copy music and
video data from a PC, see "Using microUSB
cable" (P.150).
･ For information on file formats of playable
data, see "Playing multimedia content" (P.187).
Activating Media player
From the Home screen, tap
then tap [Media player].
･
A song list in Media player appears.
Applications 195
■
Media player screen.
Playing music/video
From the Home screen, tap
then tap [Media player].
･
･
A song list appears.
Tap [Songs]/[Artists]/[Albums] to
change order of the song list.
･ Tap [Movie] to display video list.
Songs/Artists/Albums tab
･ Switch display setting for song list.
b View optional menu
c Movie tab
･ Show a video list.
d Store tab
･ Activate dmarket.
Tap a song or video.
･
The playback screen appears to start
playback.
❖Information
･
If you reset the terminal (P.146), contents protected
by Digital Rights Management (DRM) cannot be
played.
❖Information
･
Display order of "Songs", "Artists", "Albums" tabs. To
change the display order, tap
and tap
[Settings]u[Arrange icons], and then touch and hold
an icon you want to change order to drag to any of
[Songs]/[Artists]/[Albums] then tap [Apply].
Applications 196
■
■
Music playback screen
Video playback screen
Back to song list
Playback point
･ Appears when album art is tapped.
c View optional menu
d Album art
e Show track information
f Repeat OFF/Repeat ON/1 track repeat
g Shuffle OFF/Shuffle ON
h Go back to the beginning of the track or to the
previous track/Play or pause/Skip to the next track
i Volume control
･ Alternatively, press m during playback to
adjust volume.
Back to video list
Playback point
View optional menu
Show video information
Auto-rotate screen ON/OFF
･ Tap
to turn red and disable Auto-rotate
screen.
f Go back to the beginning of the video or to the
previous video/Play or pause/Skip to the next video
g Volume control
･ Alternatively, press m during playback to
adjust volume.
❖Information
･
While in landscape mode, tap the screen to display
option menu icons etc.
Applications 197
Editing songs in playlist
Play list
You can play back songs in the order you
decided using playlist.
From the Home screen, tap
then tap [Media player].
･
A song list appears.
Tap [Play list].
･
If playlists are not displayed, tap and
tap [Settings]u[Arrange icons], and
then touch and hold [Play list] to drag
to any of [Songs]/[Artists]/[Albums]
then tap [Apply].
Tap [Create new] and enter the
access point name and tap [OK].
Tap [Add songs to playlist] and
select songs you want to add.
･
You can also select songs from "Artists"
and "Albums".
･
on the selected song turns red and
the song is added to Play list by each
tap.
Tap [Play list] on the songs screen,
then select a playlist to edit and
tap [Edit].
･
Creating a playlist
■
■
Playlist editing screen appears.
Changing order of the songs
Drag up and down
in song to
change order.
Tap [Save]u[OK].
Deleting songs from playlist
Tap a song you want to delete.
Tap [Save]u[OK].
Deleting playlist
Tap [Play list] and tap [Edit].
Tap a playlist you want to delete.
Tap [Save]u[OK].
･
"Recently added songs", "Recently
played songs", and "Most played songs"
playlists cannot be deleted.
Tap [Apply]u[Save]u[OK].
Applications 198
Setting up Timescape
Timescape™
Timescape™ (hereinafter referred to as
Timescape) displays various information such
as Facebook, Foursquare, Twitter or mixi
updates, etc. in chronological order. You can
see a tile preview of events before choosing
to view the full content. With (infinite
button), you can view all communication
information related to the registered
contacts.（P.201）
❖Information
･
･
･
･
･
･
･
To make best use of Timescape, you can set up your
social networking service (SNS) account.
Note that, you cannot view emails of Gmail or other
Email application accounts in Timescape.
If you do not have a Facebook account, you can
create a new account at http://www.facebook.com.
If you do not have a Foursquare account, you can
create a new account at https://ja.foursquare.com.
If you do not have a Twitter account, you can create a
new account at http://www.twitter.com.
If you do not have a mixi account, you can create a
new account at http://mixi.jp (in Japanese only).
You can check the update of set Facebook,
Foursquare, Twitter or mixi by Timescape.
･
The first time you start Timescape, a setup
wizard will guide you the necessary steps to
set up account.
From the Home screen, tap
then tap [Timescape™].
Tap a tile.
If you want, enter your Facebook/
Foursquare/Twitter/mixi account
information.
Tap [Done].
❖Information
･
In the setup wizard, tap [Extension search] on the
account registration screen to connect to Google
Play and search new services for Timescape.
･ After completion of setup wizard, you can change
the settings. On the Timescape screen, tap
and
tap [Settings]u[Set up services].
･ If the automatic update of Facebook/Foursquare/
Twitter/mixi is set, you can check information update
sooner; however, the battery runs out quickly. To
save the battery, set to manual update.
Applications 199
Displaying tiles by service
Timescape screen
Apply filters to narrow tiles to display by
service.
Filter Icon
View optional menu
Latest comment
･ Display the latest comments posted to Facebook/
Foursquare/Twitter/mixi.
c Tile
･ Display various information such as Facebook,
Foursquare, Twitter or mixi friends updates in
chronological order.
d Filter
･ Tap a filter icon to narrow the information down
to a certain type.
･ Display order of filters may differ.
Previewing tiles in Timescape
Select a tile to view the content on the tile.
Flick a tile up and left to display a
tile to check.
Tap the filter icons on the
Timescape screen.
Displayed tile
All tiles
Updates from your Facebook contacts
Updates from your Foursquare contacts
Updates from your Twitter contacts
Updates from your mixi contacts
Refreshing the Timescape screen
When you refresh the Timescape screen, the
terminal connects to the Internet to update
information from your Facebook, Foursquare,
Twitter and mixi whose accounts are set in
Timescape.
On the Timescape screen, tap
and tap [Refresh].
Posting to Facebook, Foursquare,
Twitter, mixi from Timescape
On the Timescape screen, tap
and tap [Update status].
Mark the service you want to post
and tap [Continue].
Enter the text and tap [Post].
Applications 200
Tile icons
The following icons on a tile indicate a type of
event.
Icon
Event
A Facebook update. Tap the tile to display
the update.
A Foursquare update. Tap the tile to display
the update.
A Twitter update. Tap the tile to display the
update.
A mixi update. Tap the tile to display the
update.
Displaying detailed information for a
tile
Flick a tile up and left to display a
tile to check.
Tap a tile.
･
A detailed information screen appears
for the tile.
The infinite button in
Timescape
When you tap a tile, (infinite button) may
appear in the upper right corner. By tapping
, you can view the communication log by
registered information in the contacts or tile
filter event.
Viewing the registered information of
contacts in Timescape
On the Timescape screen, tap a
tile.
Tap
･
Communication logs and information
related to the selected tile by event
appear. Flick the filter at the bottom of
the screen to switch displayed
information.
Applications 201
Timescape settings
Displaying the Timescape setting
screen
On the Timescape screen, tap
and tap [Settings].
･
You can set the following operations.
Update mode
Set your Facebook/Foursquare/
Twitter/mixi account information to
be updated manually/automatically
when Timescape is activated.
Timescape™ Change a content type displayed in
content
Timescape.
Set up services Set Facebook/Foursquare/Twitter/
mixi account or search new service
of Timescape.
Location services
There are two ways to find your location,
using Mobile networks with Wi-Fi (Wireless
network) or GPS. Wireless network
technology determines your position fast but
accuracy may vary. If you use GPS technology
it may take a little longer, but it will find your
exact position. You can enable both Wireless
network and GPS to benefit from both
technologies when trying to find your
position.
GPS function
The terminal has a GPS receiver that uses
satellite signals to calculate your location.
Some GPS features use the Internet. Data
rates and charges may apply.
When you use functions that require the GPS
receiver to find your location, make sure you
have a clear view of the sky. If the GPS
receiver does not find your location after a
few minutes, you should move to another
location. To help the search, stand still and do
not cover the GPS antenna (P.22). The first
time you use the GPS it may take up to 10
minutes before your location is found.
Applications 202
･
Use the GPS system with great care. DOCOMO
is not liable for any damage caused by
abnormality of the system.
･ Note that DOCOMO shall have no liabilities for
any purely economic loss including those due
to missing a chance to check the
measurement (communication) results
because of external factors (including the
running out of the battery), such as a failure,
malfunction, or any other problems of the
terminal or the power failure.
･ You cannot use the terminal as a navigation
device for an aircraft, vehicle, and person.
Note that DOCOMO shall have no liabilities
whatsoever even if you suffer damage or loss
while performing a navigation using the
location information.
･ You cannot use the terminal as a highaccuracy measurement GPS. Note that
DOCOMO shall have no liabilities whatsoever
even if you suffer damage or loss due to a
deviation of the location information.
･ The GPS signals cannot be easily received
near a vehicle's sun visor with metal parts.
･ GPS is operated by the U.S. Department of
Defense. The department controls the
accuracy of the system, and manages the
system. Therefore, GPS radio wave condition
may be controlled (degradation of accuracy,
suspension of radio wave transmission, etc.) at
the discretion of the U.S. Department of
Defense.
･ Some wireless communications products
(mobile phone, data detectors and some
others) block satellite signals and also causes
instability of signal reception.
･ Some map displays based on location
information (latitude/longitude information)
may be not accurate due to some countries'
or regions' regulations.
■
Where radio waves are difficult to
receive
Note that radio waves may not be received
or it may be difficult to receive radio waves
in the following conditions, since GPS uses
radio waves from a satellite.
･ Inside or immediately under a building
･ Inside a bag or box
･ Inside or under a thick covering of trees
･ In a car, inside a train compartment
･ When there are obstructions (people or
objects) near the terminal
･ Inside a basement or tunnel, and below
the ground or water
･ In buildings-clustered or residential area
･ Near a high-voltage cable
･ Bad weather such as heavy rain or snow
Applications 203
❖Note
･
If some of the GPS functions are not available, or if
none of them are, check that your contract includes
the use of the Internet, and see "Wireless & networks"
(P.112).
･ NTT DOCOMO is not liable for navigation services or
for the accuracy of location services.
･
[Google's location service] checkbox is
marked.
･ Wireless network users' location
information is stored without specifying
who they are. Some location
information is stored even when the
application is not running.
Enabling GPS function
From the Home screen, tap
then tap [Settings].
Tap [Location services].
Tap [GPS satellites].
Read the note and tap [Agree].
･
[GPS satellites] checkbox is marked.
Enabling Wireless networks to find
position
･
Enable to search a current location using
mobile network and Wi-Fi.
From the Home screen, tap
then tap [Settings].
Tap [Location services].
Tap [Google's location service].
Read the note and tap [Agree].
Read the note on location
information and tap [Agree].
Using Google Maps
The Google Maps application lets you view
your current location, find other locations
and calculate routes. When you start the
Google Maps application, your approximate
location is shown using information from
nearby mobile towers. Your location is
updated with a more precise position when
the GPS receiver finds your location.
❖Information
･
･
･
･
･
Make sure to enable the location information service
setting before trying to get your position.
To use Google Maps, enable data connection (LTE/
3G/GPRS) or connect to Wi-Fi.
Google Maps does not cover the whole world.
Only using LTE/3G/Wi-Fi connection may not detect
some locations.
Google may provide updated service or function.
From the Home screen, tap
Applications 204
2
Tap [Maps].
･
･
If a message appears, tap [OK].
A map screen appears.
Finding the current location on the
map
On the map screen, tap
･
On the map screen, tap
Fill out the search box.
Tap
Tap a destination.
The blinking blue arrow shows the
current location.
･ If you tap , the terminal's
geomagnetic compass links the
direction displayed on the map.
Viewing Street View
･
Searching for a location you want to
look at
Street View does not cover some areas.
Touch and hold a spot on the map
that you are going to look at in
Street View.
Tap the displayed call-out.
Tap
(Street View)u[OK].
･
On the Street View display, tap and
tap [Compass mode]. The compass in
Street View shows the same direction
as the terminal's geomagnetic
compass.
･ Uncovered area for Street View appears
in light gray.
･
You can enter addresses, city names,
business types and institution names
(for example, London and art museum).
･ If a list of places searched or referred
previously appears on the screen, tap
an address, etc. on the list to check the
location on the map.
･
･
Search result appears on the map.
If "RESULTS LIST" appears, tap [RESULTS
LIST] to select the place to view.
･ When "Did you mean:" appears on the
map, you can tap [Did you mean:] to
select the place to view.
･
A detailed information screen appears.
❖Information
･
On the detailed information screen, you can check
the route or phone number for the searched
location. The items displayed vary depending on the
location.
･ On the map screen, tap
to select a category such
as "Restaurants", "Cafes" and show it on the map.
Applications 205
Zooming in or out on a map
Pinch out or in.
❖Information
･
Alternatively, double-tap the screen to zoom in.
Changing the layers
Receiving guides
Google Maps helps you receive detailed
guides for your destination.
You can select information to overlay on the
map.
On the map screen, tap .
Tap the information you want to
view.
･
Traffic information and routes are not
available in all locations.
Traffic
Satellite
Terrain
Transit Lines
Latitude
My Maps
Wikipedia
Show traffic condition.
Display satellite photo.
Display geological formation.
Show route information.
Join Latitude.
View My Maps that you create on
a PC. Only viewing : You cannot
create My Maps on the terminal.
Display .
Tap
to display a Wikipedia
article related to the location.
On the map screen, tap .
Enter a start point in the upper
entry field, and an end point in the
lower entry field.
･
Alternatively, tap at the right of the
text box to select a Start point and End
point from [My current location]/
[Contacts]/[Point on map]/[My Places].
Select a transportation from
(Driving)/
(Transit)/
(Walking).
Tap [GET DIRECTIONS].
■ Going by car/on foot
Direction is shown on a map.
■ Going by public transport
Trip list appears. Tap a trip to view details.
❖Information
･
The "Navigation" application is displayed if you tap
in car or walk option. With "Navigation"
application, you can use easy route search with My
Location as Start point.
Applications 206
Clearing the Maps
Joining Latitude
Clear displayed layers, route search results
and some others.
On the map screen, tap
[Clear Map].
･
･
and tap
If there is nothing to clear, "Clear Map" is
displayed in light gray.
Checking where a friend is by
Google Latitude
Google Latitude enables you to share
location information with your friends on the
map.
You need to set up a Google account (P.135)
and join Latitude and invite a friend who
gives his or her location information, or to
receive an invitation from him or her.
From the Home screen, tap
then tap [Latitude].
If My Location function is disabled, a
message appears. Tap [Settings], then
enable the function of "Enabling
Wireless networks to find position"
(P.204) or "Enabling GPS function"
(P.204).
Tap [MAP VIEW].
❖Information
･
To set Latitude or log out, tap a call-out displayed on
My Location in the map screen, then tap [Location
settings] to display a screen for the operation.
･ For details of Latitude, tap
on the map screen,
then tap [Help] to view the mobile help.
Applications 207
6
Calendar
The terminal has a built-in calendar for the
schedule. If you have a Google account, you
can synchronize the terminal's calendar and
web calendar. See "Accounts & sync" (P.135).
･ When you register Google account, tap the
Google account displayed in "Accounts &
sync" and a sync item "Sync Calendar". You
can create schedule etc.
Setting the calendar view
From the Home screen, tap
then tap [Calendar].
Tap [Month]/[Week]/[Day] to
select.
･
From the Home screen, tap
then tap [Calendar].
Tap
at the upper right.
Tap to add a new notification into
the schedule.
Enter a place and some others of
schedule.
Tap [Save].
❖Information
･
Tap
in "More" and flick the screen to set "Time
zone", "Guests (Email addresses)", "Show me as:", and
"Privacy".
Viewing schedule in Calendar
From the Home screen, tap
then tap [Calendar].
･
Flick the calendar left or right to display
the next or previous month/week/day
according to the view mode.
･ Tap
to display date and time set on
the terminal.
･ Pinch out/in on the weekly or daily
schedule screen to zoom in/out
calendar.
Creating a schedule in Calendar
Select the notification intervals of
the schedule.
Enter a schedule name, date, and
time.
If you have two or more calendar
accounts, select one.
If necessary, select the repetition
intervals of the calendar.
Tap a schedule you want to
display.
Applications 208
❖Information
･
While the Calendar is displayed, tap
and [My
calendars] to synchronize with the docomo account.
You can view the events created in "Schedule"
application in the Calendar.
･ If you log in to Facebook, tap [Sync Calendar] in the
"Facebook inside Xperia™" (P.137) to display events
in Facebook in the Calendar.
Searching events in Calendar
From the Home screen, tap
then tap [Calendar].
Tap
and [Search].
Enter a keyword in the search box
and tap
･
Releasing the reminder of a
schedule or setting the snooze
If a reminder icon ( ) appears in
the status bar, drag the bar
downward.
･
･
The notification panel opens.
The reminder icon appears at set
Notification time.
Tap a schedule.
Tap [Snooze all] or [Dismiss all].
･
If you have any schedules on hold, they
appear on the same screen.
･ If you tap [Snooze all], all the alarms
sound again 5 minutes later.
(Snooze is a function that sounds the
alarm some time later even though you
stop it.)
Search results appear. Tap an event to
view details.
Changing calendar settings
Set Calendar view, reminder notifications,
ringtone, vibration, reminder time.
From the Home screen, tap
then tap [Calendar].
Tap
and tap [Settings].
Select an item to change.
Applications 209
Setting alarm
Alarm & Clock
With "Alarm & Clock" application, you can set
an alarm and use world clock, stopwatch and
timer.
From the Home screen, tap
Tap [Alarm & Clock].
g h
From the Home screen, tap
then [Alarm & Clock].
･
The alarm list screen appears.
Tap [Add alarm].
･
An alarm setting screen appears. You
can set the following items.
･ Tap [Advanced alarm settings] to view
all setting items.
Time
Repeat
Alarm sound
Snooze
duration
Clock display
･ Tap to view date and time (P.147) setting screen.
Add alarm
Alarms set
Display clock in full screen
View alarm screen
View world clock
View stop watch
View timer
Delete set alarm
Set time.
Set a day of the week for the alarm.
Set alarm sound.
Set time interval to sound the
ringtone again after stopping the
ringtone.
Alarm text
Enter texts that appear while alarm
is sounding.
Style settings Mark the checkbox to display an
image while alarm is sounding.
Vibrate
Mark to vibrate at the alarm time.
Alarm volume Drag the slider left or right to adjust
the level.
Alarm in silent Mark to sound alarm even in silent
mode
mode.
Side keys
Select an effect when pressing
m / k while alarm is
behavior
sounding.
Auto silent time Set time interval until alarm
automatically stops.
Applications 210
3
Tap [Done].
･
Return to the alarms list screen.
❖Information
･
To switch on/off alarm, from the alarm list screen, tap
or touch and hold an alarm that is set, then tap
[Turn alarm on]/[Turn alarm off ].
･ When an alarm is turned on, the line under
lights
blue.
Stopping an alarm while the alarm is
sounding
❖Information
･
If you tap [Snooze], the alarm sounds again when the
time set in "Snooze duration" (P.210) has passed.
Deleting the alarm
On the alarm list screen, tap
and mark alarm to delete.
Tap [Delete]u[Yes].
･
The number of marked alarms appears
on the "Delete" button.
❖Information
･
Alternatively, on the alarm list screen, touch and hold
an alarm you want to delete, then tap [Delete
alarm]u[Yes] to delete the alarm.
While alarm is sounding, touch
and drag it to the right.
Using World clock
Display the date and time in cities around the
world.
From the Home screen, tap
then [Alarm & Clock].
Tap [World clock].
･
The list screen of the world clock
appears.
Tap [Add city].
Select a city.
❖Information
･
Tap
to display date and time set on the terminal
in full screen.
･ Add a city and tap
, then flick the list of added
cities left and right to check date and time
corresponding to the terminal's settings.
Applications 211
Changing World clock
You can switch, sort or delete Celsius/
Fahrenheit displayed on World clock.
On the world clock list screen, tap
■ Setting home city
Tap [Set home city] and select a city.
Using Stopwatch
From the Home screen, tap
then [Alarm & Clock].
Tap [Stopwatch].
Tap [Start].
Tap [Stop].
■ Switching Celsius/Fahrenheit
Tap [Celsius]/[Fahrenheit].
･ Switch Celsius/Fahrenheit.
■ Sorting
Tap [Rearrange]uDrag of the date in
the world clock up and downuTap
[Done].
■ Deleting
Tap [Delete]uMark world clock checkbox
you want to deleteuTap [Delete]u[Yes].
･ The number of marked cities appears
on the "Delete" button.
･ Alternatively, on the world clock list
screen, touch and hold a city you want
to delete, then tap [Delete city]u[Yes].
･
Measurement starts and appears in
the status bar.
･ Tap [Lap] to measure elapsed time.
･
･
Tap [Start] to resume measuring.
Tap [Reset] to delete measured time
and lap time.
❖Information
･
Tap
to display date and time set on the terminal
in full screen.
Applications 212
Using Timer
SD card backup
From the Home screen, tap
then [Alarm & Clock].
Tap [Timer].
Tap [Set time].
Flick number up and down to
adjust the time and then tap [Set].
Tap [Start].
Tap [Stop].
･
･
Time screen appears.
Timer starts, and
status bar.
appears in the
･
Stop sounding alarm after a set time
has elapsed.
･ Tap [Stop] within a set time duration to
pause timer. Tap [Start] to resume timer.
Move or back up data such as phonebook
entries, sp-mode mails, bookmarks, etc. using
external memory such as microSD card.
･ Do not remove the battery pack or microUSB
card during backup or restoring. Doing so
may damage the terminal data.
･ If the battery is low, backup or restore may not
be done. In that case, charge the terminal and
retry to back up or restore.
･ docomo apps password is required to back
up or restore. For details on docomo apps
password, see "docomo apps password"
(P.134).
❖Information
･
For details of SD card backup, tap
to view the help.
, then tap [Help]
❖Information
･
Tap
to display date and time set on the terminal
in full screen.
･ Tap
to set time from Timer history.
･ Tap
uSelect an alarm sounduTap [Done] to
change the alarm sound.
Applications 213
Backing up
Restoring
If microSD card is not installed, data such as
images and movies are saved to the internal
storage. You can back up only data such as
images and movies stored in the internal
storage. Data stored in microSD card cannot
be backed up.
From the Home screen, tap
then tap [SD card backup].
･
From the Home screen, tap
then tap [SD card backup].
Tap [Restore].
Tap [Select] on data type, mark
checkboxes for data to restore,
and tap [Select].
When you use for the first time, agree to
"License agreement".
Tap [Back up].
Mark checkboxes for data to back
up.
･
Tap [Select all] to mark all checkboxes.
･
Tap [Select latest data] to select the
latest data for each data type.
Tap [Add]/[Overwrite] to select
restore method and tap [Start
restore]u[OK].
Enter docomo apps password and
tap [OK].
･
Backed up data is restored.
Tap [Start backup]u[OK].
Enter docomo apps password and
tap [OK].
･
Data is backed up in a microSD card.
Applications 214
Copying phonebook entries
registered in Google account to
docomo account
You can copy contacts data registered in
Google account and in the terminal to
docomo account.
From the Home screen, tap
then tap [SD card backup].
･
With OfficeSuite, you can view files of Word,
Excel, etc. from the terminal or a microSD
card.
❖Information
･
Some files may not be viewed properly due to
corrupted layouts.
When you use for the first time, agree to
"License agreement".
Tap [Phonebook account copy],
tap [Select] on phonebook
contacts you want to copy.
Tap [Overwrite]/[Add].
･
OfficeSuite
Phonebook data is copied to docomo
account.
Starting OfficeSuite
From the Home screen, tap
Tap [OfficeSuite].
･
OfficeSuite starts.
❖Information
･
When you use for the first time, a screen appears for
registering a name etc. Select either [Register later] or
[Register now].
❖Information
･
If phonebook item names (e.g. Phone number, etc.)
of the other terminal are different from ones of your
terminal, the item names may be changed or
deleted. Also, some text may be deleted in copied
destination, because savable characters in a
phonebook entry vary by terminal.
･ When backing up phonebook entries to microSD
card, data without Name cannot be copied.
･ If microSD card is low on memory, backup may not
be done. In that case, delete unnecessary files to
make available space.
Applications 215
International roaming
Overview of International
roaming (WORLD WING)
With the international roaming (WORLD
WING), you can use the terminal without
changing phone number or mail address in
the service area of the overseas network
operator affiliated with DOCOMO. You do not
need to change the settings of call and SMS.
■
Supporting networks
The terminal is Class 4. The terminal works in
a 3G roaming area and GSM/GPRS service
area. Services are also available in countries
and areas supporting 3G 850MHz/GSM
850MHz. Check available areas. Use 3G
network or GSM/GPRS network overseas
because Xi is not available overseas.
■
Available Services
Main communication
services
Phone
Message (SMS)
Email*
Browser*
3G
3G850
GSM
(GPRS)
○
○
○
○
○
○
○
○
○
○
○
○
* To use data communication during roaming, mark
[Data roaming] checkbox in Mobile network settings.
(P.220)
❖Information
･
Some services are not available depending on the
overseas network operator or network.
Before using the terminal overseas,
refer to the followings.
･
"Mobile Phone User's Guide [International
Services]"
･ DOCOMO International Services website
❖Information
･
For Country codes, International call access codes,
Universal number international prefix, supported
countries/areas and network operators, refer to
"Mobile Phone User's Guide [International Services]"
or DOCOMO International Services Website.
International roaming 216
Before using
Before leaving Japan
To use the terminal overseas, check the
following in Japan.
■
■
■
Subscription
･
Check if you subscribe WORLD WING. For
details, contact "General Inquiries" on the
last page of this manual.
Charging
･
For AC adapter for charging overseas
travel, use AC adapter 03 (optional).
Usage charge
･
Overseas usage charges (call and packet
communication) differ from those in
Japan.
･ Some applications automatically perform
packet communications. Your packet
communication charges may be higher.
For operation details of each application,
please contact the application provider.
Advance preparation
Network service settings
If you subscribe to network services, you can
use network services such as Voice Mail
Service, Call Forwarding Service, Caller ID
Notification Service, etc., even overseas.
However, some network services cannot be
used.
･ To use network services overseas, you need to
set "Remote access" to activate. You can set
"Remote access" in the country you stay.
(P.224)
･ Even if the setting/canceling operation is
available, some network services cannot be
used depending on overseas network
operators.
International roaming 217
After arriving overseas
When you arrive overseas and turn on the
terminal, an available network is
automatically set.
Connectivity
When you have set search mode of "Available
networks" to "Automatic" in "Service
providers" settings, optimized network is
automatically selected.
When you connect to the network operator
conducted in flat-rate service, you can use
the service with flat-rate packet
communication charges overseas up to the
specified upper limit per day. To use this
service, subscription of packet flat-rate
service in Japan is required. For details, refer
to "Mobile Phone User's Guide [International
Services]" or DOCOMO International Services
Website.
Display
During international roaming,
appears on
the status bar.
･ You can confirm the name of the connected
network operator on the Notification panel.
❖Note
･
While
appears on the status bar, packet
communication is available. Note that packet
communication fee may become high.
Date & time settings
When "Automatic date & time" is marked in
"Date & time", the date, time and time
differences of the terminal clock are
corrected by receiving the information
related to time and time differences from the
network of overseas network operator you
connect to.
･ Correction of the time/time differences may
not be performed correctly depending on the
network of overseas network operator. In that
case, set time zone manually.
･ Timing of correction varies by the overseas
network operator.
･ Date & time (P.147)
About inquiries
･
For loss or theft of the terminal or UIM/
docomo mini UIM card, immediately contact
DOCOMO from the spot to take the necessary
steps for suspending the use. For inquiries, see
the last page of this manual. Note that you are
still liable for the call and communication
charge incurred after the loss or theft
occurred.
･ For using from land-line phone, entering
"International call access code" or "Universal
number international prefix" for the country is
needed.
International roaming 218
After returning to Japan
When you return to Japan, the terminal is
connected to DOCOMO network
automatically. If connection is failed, perform
the following operations.
･ Set "Network Mode" to "LTE (preferred)/
WCDMA/GSM". (P.220)
･ Set "Search mode" to "Automatic" in "Service
providers" settings. (P.219)
Making setting for
international use
When you start the international roaming or
move out of your operator's network, you
need to reconnect the terminal to another
available network.
Confirming and switching the
network search mode
By default, network search mode is set to
"Automatic". When you connect manually to
an overseas network operator conducted in
flat-rate service, confirm the search mode
with the following operations and switch to
"Manual".
From the Home screen, tap
then tap .
Tap [Call settings]u[Service
providers].
Tap [Search mode]u[Manual].
From "AVAILABLE NETWORKS",
tap a network to mark.
･
❖Information
･
Some applications automatically perform packet
communications. To disconnect packet
communication manually, from the Home screen,
tap
and Tap [Settings]u[More...]u[Mobile
networks]u[Data enabled] to unmark.
To display available networks, tap
[Search networks].
❖Information
･
If you set a network manually, the terminal is not
reconnected to another network automatically even
if you move out of the network area.
･ To return to "Automatic", tap [Automatic] in
Step 3.
International roaming 219
Changing network mode settings
You can change network mode settings
according to the network mode
(communication method) adopted by the
overseas network operator.
From the Home screen, tap
then tap [Settings].
Tap [More...]u[Mobile
networks]u[Network Mode].
Select a network mode you use.
･
You can select from [LTE/WCDMA],
[GSM only] and [LTE (preferred)/
WCDMA/GSM]. If you select [LTE
(preferred)/WCDMA/GSM] to switch
available network automatically.
Activating data roaming
From the Home screen, tap
then tap [Settings].
Tap [More...]u[Mobile networks].
Tap [Data roaming].
Read the cautions displayed, tap
[Yes].
･
[Data roaming] checkbox is marked.
Making/Receiving calls in
the country you stay
When you arrive overseas and turn on the
terminal, an available network is
automatically set.
･ Check that the battery and signal levels are
high enough.
･ Depending on the network operator, even if
the Caller ID notification is active, the caller ID
may not be notified or appear properly.
In this case, calls cannot be made from the call
log.
Making a call to outside
country you stay (including
Japan)
You can make a call from overseas using the
international roaming service.
･ You can easily make international calls from
the country you stay to Japan or to other
countries by entering prefix "+" and then the
country code and phone number.
From the Home screen, tap
then tap [Dial].
International roaming 220
2
Dial + (touch and hold
[0])uCountry codeuArea code
(City code)uEnter a phone
number.
･
If the area code begins with "0", omit "0".
However, "0" may be required to dial to
some country or area such as Italy.
･ To call an overseas "WORLD WING" user,
enter "81" (Japan) for the country code.
Tap
❖Information
･
During international roaming, if you make an
international call to Japan using DOCOMO's
phonebook application, the "International dialing
assist" screen appears. You can make a call without
entering country code from that screen.
Making a call within the
country you stay
You can make a call by entering the phone
number of the other party's land-line phone
or mobile phone in the same way you do in
Japan.
From the Home screen, tap
then tap [Dial].
Enter the other party's phone
number.
･
To make a call to land-line phone, enter
the area code (city code) + other party's
phone number.
Tap
Making a call to WORLD WING
user overseas
When the other party uses international
roaming service, make a call as an
international call to Japan even when you
stay in the same country as the other party.
Receiving a call in the country
you stay
You can receive a call using the international
roaming service.
International roaming 221
1
While receiving a call, touch
(left) and drag it to
(right).
When the conversation is finished,
tap [End call].
❖Information
･
When you received a call during the international
roaming, regardless of which country the call is from,
it is forwarded internationally from Japan. A caller is
charged for a call fee to Japan, and the receiver is
charged for a reception fee.
■
Having the other party call you
･
Calling from Japan to the country you stay
To have the other party make a call from a
land-line phone or mobile phone in Japan
to the terminal in the country you stay,
the other party only needs to dial the
phone number as in Japan.
･ Calling from the country except Japan to
the country you stay
You have to receive a call through Japan
no matter where you are; therefore, the
other party needs to enter the
international call access code and "81"
(Country code of Japan).
International access code - 81 - 90 (or 80)
- XXXX - XXXX
International roaming
settings
Make settings for using international
roaming or international calls.
Settings for making/receiving
calls overseas
Set restricting incoming calls overseas or
using roaming guidance.
･ For some overseas network operators,
settings may not be made.
Restricting incoming calls for
roaming
From the Home screen, tap
then tap .
Tap [Call settings]u[Roaming
settings].
Tap [Restricting incoming calls].
･
Select items you want to use.
Activate
Tap any of [Restricting all incomings]/
restricting [Restricting incoming of video call/64K
data], enter the network security code,
and tap [OK].
Deactivate Enter the network security code and tap
restricting [OK].
International roaming 222
Check
settings
Check the current service settings.
Deactivate
Tap [OK] to deactivate roaming
roaming guidance guidance.
Check settings
Check the current service
settings.
Setting incoming notification on
roaming
From the Home screen, tap
then tap .
Setting international dial assistance
Tap [Call settings]u[Roaming
settings].
From the Home screen, tap
then tap .
Tap [Incoming notification on
roaming].
Tap [Call settings]u[Roaming
settings].
Tap [International dial assist].
･
Select items you want to use.
Activate incoming
call notification
Deactiv. incoming
call notification
Check settings
Tap [OK] to activate roaming
incoming call notification.
Tap [OK] to deactivate roaming
incoming call notification.
Check the current service
settings.
Setting roaming guidance
From the Home screen, tap
then tap .
Tap [Call settings]u[Roaming
settings].
Tap [Roaming guidance].
･
Select items you want to use.
Activate roaming
guidance
Tap [OK] to activate roaming
guidance.
･
Select items you want to use.
Auto conversion
Country code
International
prefix
Mark the checkbox to add
international prefix or country
code automatically.
Tap [OK] to select a country code
which will be used for auto
conversion.
Tap [OK] to select an
international prefix which will be
used for auto conversion.
Settings Network service (overseas)
Set network service such as voice mail from
overseas.
･ If you make the settings overseas, you are
charged a call fee to Japan from the country
you stay.
･ For some overseas network operators,
settings may not be made.
International roaming 223
1
From the Home screen, tap
then tap .
Tap [Call settings]u[Roaming
settings].
Tap [Network service].
･
Select items you want to use. You need
to set "Remote access" to activate.
Voicemail Activate
(charged) Voicemail
(roaming)
Deactivate
Voicemail
(roaming)
Play
voicemail
message
(roaming)
Voicemail
settings
(roaming)
Voicemail
ring time
(roaming)
Incoming call notific.
(charged)
Caller ID request
(charged)
Roaming guidance
(charged)
Remote operation
(charged)
Call
Activate call Tap [OK].*
forwarding forwarding
(charged) Deactivate Tap [OK].*
call
forwarding
Check
Tap [OK].*
settings
* Follow the voice prompts to operate.
Tap [OK].*
Tap [OK].*
Tap [OK]. After this step,
follow the voice prompts
to play the message.
Tap [OK].*
Tap [OK].*
Tap [OK].*
Tap [OK].*
Tap [OK].*
Tap [OK].*
International roaming 224
Appendix/Index
Optional and related
devices
A variety of commercially available optional
devices allows you to expand the terminal's
capabilities by supporting a wide range of
purpose, including personal and business
uses.
Some accessories are only available in some
areas.
For details, please contact a sales outlet such
as docomo Shop.
For details on optional devices, see the user's
manual of each device.
･ Back Cover SO19
･ Battery Pack SO07
･ TV Dock SO13
･ Carry Case 02
･ Pocket charger 01/02
･ AC Adapter cable SO02
･ AC Adapter 03
･ DC Adapter 03
･ AC Adapter Converter Plug Type C 01
･ MicroUSB Cable 01
･ Wireless Earphone Set 03
Troubleshooting
Troubleshooting
･
First, check if the software update is necessary
for the terminal. If necessary, perform the
software update (P.234).
･ When checking the following items not to
improve the state, contact the phone number
given in "Repairs" the last page of this manual
(in Japanese only) or DOCOMO-specified
repair office.
■
Power supply
Cannot power on the terminal.
･ Is the battery pack installed correctly?
･ Check if the battery pack is not run out.
■
P.25
P.27
Charging
Cannot charge the terminal.
(The notification LED does not turn on, or the icon
that means charging does not appear.)
･ Is the battery pack installed correctly?
P.25
･ Check if the adapter's power plug or
P.28
cigarette lighter plug is correctly
inserted to an outlet or cigarette lighter
socket.
･ Check if the adapter cable and the
P.28
terminal are set correctly.
Appendix/Index 225
･
If you execute calls, communications or
−
other function operations for a long time
while charging, the terminal may
become hot and the battery status icon
may not indicate charging (charging
stops) or charging may not be
completed. In this case, wait until the
temperature of the terminal drops and
charge again.
The notification LED blinks in red and cannot
operate the terminal.
･ When the battery level is low, charge the
P.27
battery.
■
Terminal operation
Become hot while operating/charging.
･ While calling, depending on the radio
−
wave condition or call duration time, the
terminal may become hot. This
condition is not abnormal.
･ While operating or charging, or if you
−
record video etc. for a long time while
charging the battery, the terminal,
battery pack and adapter may become
hot. There is no problem about safety
and continue to use it.
The operation time provided by the battery pack is
short.
･ Is your terminal left for a long time under
−
the state of out of service area?
Out of service area, more power is
consumed to search available radio
waves.
･
P.27
The operating time of the battery pack
varies depending on the operating
environment and the degradation level
of the battery pack.
･ Battery pack is a consumable accessory.
−
The usage duration of the battery per
one charge decreases gradually each
time the battery is recharged.
If the operation time is too short with
fully charged state, purchase a new
battery pack of the specified type.
Turning the power off or restarting automatically
happens.
･ If the terminals of battery pack are dirty,
−
the contact may become poor and the
power may shut OFF. Clean the terminals
of the battery pack with a dry cotton
swab etc. if they are dirty.
No operations are performed even by pressing the
keys on the terminal.
･ Check if you activate the screen lock.
P.142
The screen reacts slowly when a button is pressed.
･ When large amount of data is saved in
−
the terminal or transferring large-size
data between the terminal and microSD
card, the reactions on the screen may be
delayed.
The docomo mini UIM card is not recognized.
･ Check if the docomo mini UIM card is
P.23
attached in the right direction.
Appendix/Index 226
The clock is not on time.
･ The clock time may become wrong
while turning on the power for a long
time. Check if "Automatic date & time" is
set to on and turn the power off and on
in a place with strong radio wave
conditions.
The terminal operation is unstable.
･ Instability may be caused by
applications that you installed after
purchasing the terminal. If the symptom
is improved when you boot the terminal
in safe mode (near default state),
uninstalling the installed application
may improve the symptom.
To boot the terminal in safe mode, press
and hold p for over a second with
the terminal OFF until Sony logo appears,
and then touch and hold m at the
bottom until the terminal vibrates once.
When safe mode is booted, "Safe mode"
is displayed at the lower left of the
screen.
To exit the safe mode, turn power OFF
and then ON.
* Back up the necessary data before
using safe mode.
* Some widgets that you created may
be removed.
* Safe mode is not a normal booting
state. To use ordinarily, exit the safe
mode.
P.147
Applications cannot be operated properly
(applications cannot be activated, or errors occur
frequently).
･ Are there any applications being
P.133
disabled? Enable disabled applications,
then retry.
■
−
Phone call
Cannot make a call even if you press the dial button.
･ Check if you activate the SIM card lock.
P.141
･ Check if you activate Airplane mode.
P.118
The ringtone does not sound.
･ Is the call alert volume of volume setting
P.125
set to silent?
･ Check if the silent mode is active.
P.126
･ Is the ring time for Voice Mail service or
P.84
Call Forwarding Service "0 Sec."?
Calls are not connected.
(Even when moving " 圏外 (out of service area)" does
not disappear, or although radio waves are enough,
making/receiving calls is unavailable.)
･ Turn the power OFF and ON, or remove
P.23
and attach docomo mini UIM card.
P.25
P.30
･ Due to the nature of radio waves,
−
making/receiving calls may be
unavailable even when "not out of
service area" or "
appears on the
display for the radio wave condition".
Move to the other place and call again.
Appendix/Index 227
･
Due to the crossing of radio waves, at
the crowded public places, calls/mails
are crossed and the connection status
may not be good. Move to other place or
call again at other time.
■
Display
The display is dim.
･ Check if the backlight time-out is set.
･ Check if the brightness of screen is
changed.
･ Check if you activate eco モード (eco
mode).
･ Check if you cover the Proximity sensor
with sticker etc.
･ When the temperature of the terminal
becomes high while using, the display
may become darker. It is not abnormal.
■
−
P.127
P.127
P.71
P.22
−
Sound
During a voice call, the distant party's voice is hard
to listen to or too loud.
･ Check if the listening volume of the
P.81
sound volume setting is changed.
■
Display data
■
Camera
Still images and video taken with the camera are
blurred.
･ Check if clouds or dirt attach to the lens
−
of camera.
･ To shoot a portrait image, use the face
P.172
detection function.
･ Shoot using shake reducing function.
P.180
P.185
■
Osaifu-Keitai
Osaifu-Keitai function is unavailable.
･ When removing the battery pack,
Osaifu-Keitai functions are unavailable
regardless of the Osaifu-Keitai lock
settings.
･ Is Osaifu-Keitai lock activated?
･ Do you place
mark of the terminal
over an IC card reader?
■
−
P.164
P.163
International roaming
Cannot use the terminal overseas.
■ When antenna mark is displayed
･ Do you subscribe WORLD WING?
Check if you subscribe WORLD WING.
−
Images or ringtones set in each feature do not work
and the terminal operates in the default data.
･ Is the inserted docomo mini UIM card
−
the same one that is set when the
images or ringtones are obtained?
Appendix/Index 228
■ Out of service area indicator appears
･ Check if you are out of the international
P.218
P.220
P.30
roaming service area or in an area with
poor signal strength. Check if the service
area and network operator are available,
referring to "Mobile Phone User's Guide
[International Services]" or DOCOMO
International Services website.
･ Change the network settings or overseas
network operator settings.
Set "Search mode" to "Automatic" in
"Service providers" settings.
Set "Network Mode" to "LTE (preferred)/
WCDMA/GSM".
･ Turning off the terminal and then
turning on again may work for the
restoration.
Cannot perform data communication overseas.
･ Mark the data roaming checkbox.
P.220
The terminal suddenly became unavailable while
using overseas.
･ Check if usage amount exceeds the limit
−
of maximum charges for use.
For use of "International roaming
(WORLD WING)", the limit of maximum
charges for use is set in advance. If
exceeding the limit of maximum charges
for use, pay the charges.
Cannot receive calls overseas.
･ Is "Restricting incoming calls" set to
P.222
"Activate restricting"?
No caller ID is notified/A notified caller ID is
different from that of the caller/Functions for using
contents saved in phonebook or those using Caller
ID notification do not operate.
･ Even if a caller notifies its caller ID, it is
−
not displayed on the terminal unless the
network or network operator notifies it.
And a different caller ID may be notified
depending on the network or network
operator you use.
■
Data management
Data transfer is not performed.
･ Check if USB hub is used. If you use USB
−
hub, operations may not be performed
correctly.
Data saved in microSD card is not displayed.
･ Remove the microSD card and insert it
P.24
again.
When trying to display an image, "×" appears
instead of it.
Or "×" appears for the demo play or the preview
function.
･ "×" may appear instead of destroyed
−
image data.
Appendix/Index 229
■
Bluetooth function
The terminal cannot be connected to a Bluetooth
communication device/A Bluetooth
communication device cannot be found from the
terminal.
･ Make Bluetooth communication device
P.156
(commercial item) registering stand-by
state and then register the device on the
terminal. If you delete already registered
device and register the device again as a
new device, delete the registrations on
both Bluetooth communication device
(commercial item) and the terminal and
then perform registration of the devices.
Calls cannot be made from the terminal connecting
to external device such as car navigation or
handsfree device.
･ If calls are made several times when the
−
other party does not answer or is out of
service, the call to this number may be
disabled. In this case, turn terminal off
and on.
Error messages
No service
･
The terminal is out of service area, or the
received signal is too weak. Move to a location
where radio signal can be reached.
･ The docomo mini UIM card is not working
properly.
Insert the docomo mini UIM card in another
terminal. If this works, it is probably the
terminal that is causing the problem. In this
case, contact "Repairs" on the last page of this
manual (in Japanese only).
Removing and inserting docomo mini UIM
card may improve the problem.
SIM card is locked
Enter your PIN code (P.141) correctly.
SIM card is PUK-locked
Enter your PUK (Personal Unblocking Key)
(P.141) correctly.
The phone storage is full
There is no memory space. Delete
unnecessary applications (P.132) to obtain
memory space.
Appendix/Index 230
Smartphone Anshin
Remote Support
By sharing screens of your terminal with NTT
DOCOMO, you can receive technical support
to make settings (in Japanese only).
･ This service is not available when your
docomo mini UIM card is not inserted, during
international roaming, or in Airplane mode.
･ Smartphone Anshin Remote Support is a
service requiring subscription.
･ Some operations and settings are not
supported.
･ For details on Smartphone Anshin Remote
Support, refer to NTT DOCOMO website.
Call スマートフォン遠隔サポートセン
ター (Remote support center for
smartphone) (
0120-783-360,
Business hours: 9:00 a.m. to 8:00
p.m., open all year round).
Tap [ 遠隔サポート (Remote
support)].
･
When you use for the first time, agree to
" ソフトウェア使用許諾書 (License
Agreement)".
Enter connection number notified
by DOCOMO.
Remote support starts when you
are connected.
Warranty and After Sales
Services
Warranty
･
Make sure that the warranty is received with
the terminal upon purchase. Check to be sure
that " 販売店名・お買い上げ日 (the name of the
retailer, date of purchase)", and other items
have been filled out on the warranty before
storing it in a safe place. If any necessary
information is not provided, immediately
contact the retailer and request to complete
the warranty. The terminal comes with a year's
free warranty starting from the date of
purchase.
･ Specifications of this product and its
accessories are subject to change for
improvement without prior notice.
･ Data saved in the Contacts etc. may be
changed/lost due to the trouble/repairs or
handling of the terminal. DOCOMO
recommends making a copy of the
Phonebook data etc., in case.
* You can save Phonebook data in a microSD
card inserted to the terminal.
* Data such as phonebook entries can be
backed up to Data center using Data Security
Service (subscription is required).
Appendix/Index 231
･
When requesting a repair, make sure to
bring the warranty card with the terminal.
Repair requests that are not accompanied
by the warranty or that involve
malfunction and damage due to incorrect
handling by the owner (damage of liquid
crystal, connector, etc.) will only be
repaired at the owner's expense, even if
the warranty period is still effective.
･ Malfunction due to use of devices and
consumable parts other than those
specified by DOCOMO will only be
repaired at the owner's expense, even if
the warranty period is still effective.
After Sales Services
If you have problems with the
terminal
Before asking repair, see "Troubleshooting"
(P.225) in this manual to check the problem. If
the problem still persists, contact "Repairs"
on the last page of this manual (in Japanese
only).
If repair is required resultingly
Bring the terminal to the DOCOMO-specified
repair office. However, it must be taken
during business hours of the repair office.
Make sure to bring a warranty card with the
product when you visit the shop. Note that
repair may take some days depending on the
problem.
■
Within the warranty period
･
We repair the terminal free of charge
based on the terms documented in the
warranty.
■
Note that repair may be refused in the
following cases:
･
When the terminal has corrosion due to
wet by liquid, condensation, perspiration,
etc. or the internal circuit board is
damaged or deformed (we may not be
able to repair when the microUSB
connector, headset connecting jack,
liquid crystal, etc. is damaged or the frame
itself is cracked) based on the result of our
examination.
- Even if repair is possible, it will be done
at the owner's expense, as this type of
corrosion or damage is not covered by
the warranty.
Appendix/Index 232
■
If the warranty period expires
We will repair the terminal at the owner's
expense.
■
Parts stock period
The functional parts necessary to repair the
terminal will be basically available for a
minimum of six years after the manufacture
is discontinued.
However, depending on the defective
portion, repair may not be possible because
of a shortage of repair parts. Note that repair
may still be possible depending on the
defective portion even if the stock period
has expired. Contact "Repairs" on the last
page of this manual (in Japanese only).
Precautions
● Never modify the terminal or accessories.
･ Doing so may result in fire, injuries or
･
malfunctions.
The modified terminal may be repaired
only if the owner agrees on that all the
modified parts are restored to the original
conditions.
However, repairs may be refused
depending on the modifications.
The following cases may be considered as
modifications.
- Put a seal etc. on the liquid crystal or
keypad.
- Glued decorations on the terminal using
adhesion bond, etc.
- Change the parts such as exterior to
other than DOCOMO standard parts.
･ Malfunction and damage due to
modifications will be repaired at the
owner's expense, even if the warranty
period is still effective.
● The model plate must not be removed
from the terminal.
The model plate certifies that the terminal
satisfies technical standards. It should be
noted that if the plate is removed or is
replaced with a different plate, and the
original model plate cannot be verified, it
may disqualify the unit from repairs due to
not being able to determine the technical
standards of that particular phone.
● Note that the settings and other
information may be reset (cleared) as a
result of malfunction, repair or other
handling. In this case, make the settings
again.
● After the repair, Wi-Fi MAC address or
Bluetooth address may be changed
regardless of the repaired parts.
Appendix/Index 233
● A material that generates a magnetic field
is used in the following parts of the
terminal.
Do not hold an object that is easily
affected by magnetism, such as a cash
card, close to the terminal. You may not
be able to use the card any more.
Where it is used: Speaker, earpiece
● If inside of the terminal gets wet or moist,
turn the power off, remove the battery
pack immediately, and bring the terminal
to a repair office as soon as possible.
However, repair may not be possible
depending on the condition of the
terminal.
Precautions on memory dial
(Phonebook function) and
downloaded data
Note that data you created or data you
retrieved or downloaded from sources other
than your terminal may be changed or lost
when you change the model or have repairs
done to the terminal. DOCOMO shall have no
liability for any change or loss of any kind.
Under some circumstances, DOCOMO may
replace your terminal with its equivalent
instead of repairing it.
Updating software
You can update the terminal to the most
recent software for optimal performance and
to get the latest enhancements.
❖Note
･
When the terminal is connected to the Internet using
the mobile network connection, data
communication fee is applied.
･ Make sure you back up and save all data contained in
the terminal before you start updating the terminal.
･ For the first time activating the terminal after
software update, the operation may be slower from
several minutes to several ten minutes due to data
update. The required time varies by the data in the
terminal. Do not turn the power off until usual
operation speed comebacks.
❖Information
･
For details, refer to http://www.sonymobile.co.jp/
support/ (in Japanese only).
Appendix/Index 234
Setting notification of Software
update
Downloading software updates
wirelessly
You can set to be notified of updating
software.
Downloading software to update
From the Home screen, tap
then tap [Update Center].
Tap
and [Settings].
Mark [Notifications] checkbox.
･
To change the notification tone, tap
[Notification tone], then tap notification
tone you want to change, and then tap
[Done].
Software can be downloaded wirelessly
directly from your terminal via the Internet by
using mobile network connection or by using
a Wi-Fi network connection.
From the Home screen, tap
then tap [Update Center].
Tap [System] tab and then
❖Information
･
If you mark [Notification vibration] checkbox in Step
3, Software update is notified by vibration.
･
The terminal searches for software
updates.
❖Information
･
You can also search the software update in the
following operation.
From the Home screen, tap
and , then tap
[Settings]u[About phone]u[Software
update]u[System] and then tap .
･ "New apps"/"Updates" tabs in the Update Center
screen are not available because the services are not
provided in Japan.
❖Note
･
For software update via mobile network, a high
packet communication charge will be applied
because of a large amount data communication. For
this reason, subscription of packet flat-rate service is
highly recommended.
･ While you are using roaming service overseas, you
cannot search for or download update software
through the mobile network.
Appendix/Index 235
Updating the latest software
automatically
You can update the latest software update
automatically on regular basis. If software
update is searched, appears on the status
bar.
From the Home screen, tap
then tap [Update Center].
Tap
and [Settings].
Tap [Allow automatic updates],
read the notes and tap [OK].
❖Note
･
Note that if you tap
from the Home screen, then
tap [Update Center] and
then tap
[Settings]u[Preffered data traffic] and then select [Via
mobile network/Wi-Fi] in the Preffered data traffic
screen, a Wi-Fi connection automatically switches to
mobile network communications when the Wi-Fi
connection is unstable and packet communication
fee may apply.
･ Note that packet communication fee may apply for
searching automatically.
Connecting to a PC and
updating
You can update software by using PC
Companion that can be installed into a PC
from the terminal.
❖Information
･
To install PC Companion on a PC, an Internet
connection is required.
When PC Companion is not installed
on your PC
Connect the terminal to a PC using
a microUSB cable.
When "PC Companion software"
screen appears on the terminal,
tap [Install].
･
Installer of PC Companion starts on the
PC.
Follow the onscreen instructions
on the PC to install.
･
After installation, PC Companion starts
on the PC. If further software update is
searched, it is automatically notified.
Follow the onscreen instructions on the
PC.
Appendix/Index 236
When PC Companion is installed on
your PC
Check if PC Companion is activated
on the PC. If not, activate PC
Companion from the Start menu.
Connect the terminal to a PC using
a microUSB cable.
Follow the onscreen instructions
on the PC.
･
If available software update is found, it
is automatically notified.
Main specification
■
The terminal
Product name
Size
SO-01E
Approx. 131mm (H)×
approx. 69mm (W)×
approx. 10.5mm (T)
(Thickest part : Approx.
11.6mm)
Weight
Approx. 127g (with
battery)
Storage
ROM 16GB
RAM 1GB
External storage
Compatible with
microSD card of up to
2GB, and microSDHC
card of up to 32GB (as of
July, 2012).
Continuous FOMA/3G Approx. 380 hours
stand-by
(stationary)
time
GSM
Approx. 300 hours
(stationary)
LTE
Approx. 270 hours
(stationary)
Continuous FOMA/3G Approx. 400 min.
call time
GSM
Approx. 400 min.
Charging
AC Adapter Approx. 170 min.
time
03
DC Adapter Approx. 180 min.
03
Appendix/Index 237
Display
Image
pickup
device
Type
Size
Number of
dots
Type
Size
Camera pixels
Digital zoom
Still image capture size
TFT16,777,216 colors
Approx. 4.6 inches
Width 720 dots×
Height 1280 dots
Camera : CMOS
Front camera : CMOS
Camera: 1/3.0 inches
Front camera :
1/6.0 inches
Camera :
Effective pixels : Approx.
13,000,000 pixels
(Recorded pixels :
Approx. 12,800,000
pixels)
Front camera :
Effective pixels : Approx.
1,300,000 pixels
(Recorded pixels :
Approx. 1,200,000 pixels)
Camera : Max. 16x (41
levels)
Front camera : ―
Camera : 4128×3096
(13MP 4:3)
4128×2322 (10MP 16:9)
1632×1224 (2MP 4:3)
1920×1080 (2MP 16:9)
Front camera :
1280×720 (1MP 16:9)
1280×960 (1MP 4:3)
Video recording size
Video camera :
1920×1080 (Full HD)
1280×720 (HD 720p)
640×480 (VGA)
Front video camera :
1280×720 (HD 720p)
640×480 (VGA)
Frame rate
Max. 30 fps
Wireless LAN
Compliant with
IEEE802.11a*1/b/g/n
(Corresponding
frequency band to
IEEE802.11n : 2.4GHz/
5GHz)
Bluetooth Supported Compliant with
Bluetooth Bluetooth standard Ver.
version
3.1*2
Radio power Bluetooth standard
Power Class 1
Within approx. 10 m
Available
communication
distance*3
Supported A2DP, AVRCP, HFP, HID,
Bluetooth HSP, OPP, PAN, PBAP, SPP
profile*4
*1 Not available when docomo mini UIM card is not
inserted.
*2 It is confirmed that the terminal and all Bluetooth
devices are compliant with Bluetooth standards
designated by Bluetooth SIG, and they are
authenticated. However, procedures may differ or
data transfer may not be possible depending on the
device's characteristics or specifications.
Appendix/Index 238
*3 May vary by the signal status and/or whether there
is an interference between communications
devices.
*4 Bluetooth standards for Bluetooth device
connection procedure according to the product's
applications.
･ Continuous call time is an estimate of the
operation time for calling when radio signal
reception is normal.
･ Continuous stand-by time is an estimate of
the stand-by time when radio signal
reception is normal.
In certain circumstances, the stand-by time
may drop to as low as half the time shown
due to the battery charge, function settings,
temperature, or radio signal reception in the
area (no reception or weak).
･ A use of the Internet reduces the actual call
(communication)/stand-by time.
Composing messages or activating the
camera or applications also reduces call
(communication)/stand-by time even if you
do not call or use the Internet.
･ Stationary continuous stand-by time is the
estimated average operation time when radio
signal reception is normal.
･ Moving continuous stand-by time is the
estimated average operation time when the
terminal remains in the combined conditions
of "stationary" or "moving" in a service area
when radio signal reception is normal and the
condition of "out of area".
･
Charging time is an estimate of the time
required to charge a completely empty
battery pack.
■
Battery Pack
Product
name
Battery type
Voltage
Current
■
Battery Pack SO07
Lithium Ion Battery
DC3.7V
1700mAh
File format
The terminal supports the display or
playback of the following file format:
Type
Sound
Still image*
Video
File format
WAV (PCM, G.711) (.wav), AAC (.3gp,
.m4a, .mp4), AAC+ (.3gp, .m4a, .mp4),
eAAC+ (.3gp, .m4a, .mp4), MP3 (.mp3),
AMR-NB (.3gp), AMR-WB (.3gp), MIDI
(SP-MIDI/GM/GML (.mid), XMF (.xmf ),
Mobile XMF 1.0 (.mxmf ), RTTTL/RTX
(.rtttl, .rtx), OTA (.ota), iMelody (.imy)),
Ogg Vorbis (.ogg), FLAC (.flac), PIFF
(.isma)
JPEG (.jpeg, .jpg), GIF (.gif ), PNG (.png),
BMP (.bmp), WEBP (.webp)
H263 (.3gp, .mp4), H264 AVC (.3gp,
.mp4), MPEG-4 SP (.3gp), VP8 (.webm,
.mkv), Xvid (.avi), Quicktime (.mov),
PIFF (.ismv)
* Still images are saved in JPEG format when shot with
Camera in the terminal.
Appendix/Index 239
■
Numbers of still images (Estimation)
Savable number of
shot images to the
internal storage
Savable number of
shot images to a
microSD card (1GB)
Up to approx. 16000 images
Up to approx. 1600 images
* Number of images shot with a resolution of 2MP.
■
Time length of shooting video
(Estimation)
Savable time of
recording to the
internal storage
Savable time of
recording to a
microSD card
(1GB)
Per video : Up to approx. 268 min.
In total : Up to approx. 714 min.
Per video : Up to approx. 67 min.
In total : Up to approx. 67 min.
* Time of recording with a resolution of 640×480
(VGA).
Appendix/Index 240
End User Licence
Agreement
End User Licence Agreement
Software delivered with this device and its
media is owned by Sony Mobile
Communications AB, and/or its affiliated
companies and its suppliers and licensors.
Sony Mobile grants you a non-exclusive
limited licence to use the Software solely in
conjunction with the Device on which it is
installed or delivered. Ownership of the
Software is not sold, transferred or otherwise
conveyed.
Do not use any means to discover the source
code or any component of the Software,
reproduce and distribute the Software, or
modify the Software. You are entitled to
transfer rights and obligations to the
Software to a third party, solely together with
the Device with which you received the
Software, provided the third party agrees in
writing to be bound by the terms of this
Licence.
This licence exists throughout the useful life
of this Device. It can be terminated by
transferring your rights to the Device to a
third party in writing.
Failure to comply with any of these terms and
conditions will terminate the licence
immediately.
Sony Mobile and its third party suppliers and
licensors retain all rights, title and interest in
and to the Software. To the extent that the
Software contains material or code of a third
party, such third parties shall be beneficiaries
of these terms.
This licence is governed by the laws of
Sweden. When applicable, the foregoing
applies to statutory consumer rights.
In the event Software accompanying or
provided in conjunction with your device is
provided with additional terms and
conditions, such provisions shall also govern
your possession and usage of the Software.
Appendix/Index 241
About Open Source
Software
About Open Source Software
This product includes certain open source or
other software originating from third parties
that is subject to the GNU General Public
License (GPL), GNU Library/Lesser General
Public License (LGPL) and different and/or
additional copyright licenses, disclaimers and
notices. The exact terms of GPL, LGPL and
some other licenses, disclaimers and notices
are reproduced in the about box in this
product and are also available at http://
opensource.sonymobile.com.
Export Controls and
Regulations
This product and its accessories may be
covered and controlled by Japan's export
control regulations ("Foreign Exchange and
Foreign Trade Law" and related laws and
regulations). If you wish to export this
product and/or its accessories, you must
complete the necessary procedures at your
own responsibility and cost. For details about
the procedure, contact the Ministry of
Economy, Trade and Industry.
Sony Mobile offers to provide source code of
software licensed under the GPL or LGPL or
some other open source licenses allowing
source code distribution to you on a CD-ROM
for a charge covering the cost of performing
such distribution, such as the cost of media,
shipping and handling, upon written request
to Sony Mobile Communications AB, Open
Source Software Management, Nya
Vattentornet, SE-221 88 Lund, Sweden. This
offer is valid for a period of three (3) years
from the date of the distribution of this
product by Sony Mobile.
Appendix/Index 242
Intellectual Property Right
About the Copyright and Portrait
rights
Copyrighted contents you recorded or
obtained from sites or Internet home pages
using this product by downloading or other
means, such as documents, images, music
data, software, are prohibited from
reproduction, transformation and
transmission over public lines without
consent of the copyright holders, unless
intended for personal use or any other
purpose permitted by law.
Note that some performances, shows, and
exhibitions may not allow photography,
movie shooting, or sound recording even for
personal use.
You should also refrain from taking a picture
of other people and disclosing it by such
means as posting it on a site on the Internet
without their consent because of possible
infringement of their right of portrait.
Trademarks
The company names and product names
appearing in this manual are trademarks or
registered trademarks of their respective
holders.
･ "FOMA", "i-mode", "i-αppli", "Deco-mail", "spmode", "WORLD WING", "WORLD CALL",
"ToruCa", "mopera", "mopera U", "iD", and logo
of "ToruCa" are trademarks or registered
trademarks of NTT DOCOMO, INC.
･ "Bluetooth" is a registered trademark of
Bluetooth SIG. INC., and Sony Mobile
Communications is licensed to use them.
･ "Wi-Fi" is a registered trademark of Wi-Fi
Alliance.
･ Wi-Fi Protected Setup and Wi-Fi Protected
Setup logos are registered trademarks of Wi-Fi
Alliance.
Appendix/Index 243
･
The Wi-Fi Protected Setup Mark is a mark of
the Wi-Fi Alliance.
･
"Catch Phone (Call waiting service)" is a
registered trademark of Nippon Telegraph
and Telephone Corporation.
･ "Xperia", "Timescape", "TrackID" and "Live
Ware" are trademarks or registered
trademarks of Sony Mobile Communications
AB.
･ Technology of Gracenote Mobile MusicID is
used for "TrackID". "Gracenote" and
"Gracenote Mobile MusicID"are trademarks or
registered trademarks of Gracenote, Inc.
･ "Media Go" is a trademark or registered
trademark of Sony Media Software and
Services.
･ "PlayStation" and " " are trademarks or
registered trademarks or Sony Computer
Entertainment
Inc.
･
"BRAVIA", "Sony", "Sweep Multi Angle", "Sweep
Panorama", "WALKMAN", "xLOUD", "FeliCa" and
"Reader" are trademarks or registered
trademarks of Sony Corporation.
･
"POBox" and "POBox"
logo are registered
trademarks of Sony
Computer Science Laboratories, Inc.
"POBox" is a co-developed technology of
Sony Computer Science Laboratories, Inc. and
Sony Mobile Communications Japan, Inc.
･ microSD logo is a trademark of SD-3C,
LLC.
･
is a registered trademark of FeliCa
Networks, Inc.
･ FeliCa is a contactless IC card technology
developed by Sony Corporation.
･ "Twitter" is a trademark or registered
trademark of Twitter, Inc.
･ "Google" and "Google" logo, "Android" and
"Android" logo, "Google Play" and "Google
Play" logo, "Google+", "Gmail", "mobile Google
Maps", "Google Talk", "Google Latitude",
"Google Calendar", "YouTube" and "YouTube"
logo and "Picasa" are trademarks or registered
trademarks of Google, Inc.
･ "Facebook" is a trademark or registered
trademark of Facebook, Inc.
･ mixi and mixi logo are registered trademarks
of mixi, Inc.
･ DLNA is a trademark or registered
trademark of the Digital Living
Network Alliance.
Appendix/Index 244
･
MHL, Mobile High-Definition
Link and the MHL Logo are
trademarks or registered trademarks of the
MHL, LLC.
･ "Microsoft", "Windows", "Outlook", "Windows
Vista", "Windows Server", "Windows Media"
and "ActiveSync" are trademarks or registered
trademarks of Microsoft Corporation in the
United States and other countries.
･ This product contains technology subject to
certain intellectual property rights of
Microsoft. Use or distribution of this
technology outside of this product is
prohibited without the appropriate license(s)
from Microsoft.
･
Content owners use Microsoft PlayReady™
content access technology to protect their
intellectual property, including copyrighted
content. This device uses PlayReady
technology to access PlayReady-protected
content and/or WMDRM-protected content.
If the device fails to properly enforce
restrictions on content usage, content owners
may require Microsoft to revoke the device's
ability to consume PlayReady-protected
content. Revocation should not affect
unprotected content or content protected by
other content access technologies. Content
owners may require you to upgrade
PlayReady to access their content. If you
decline an upgrade, you will not be able to
access content that requires the upgrade.
Appendix/Index 245
･
This product is licensed under the MPEG-4
visual and AVC patent portfolio license for the
personal and non-commercial use of a
consumer for (i) encoding video in
compliance with the MPEG-4 visual standard
("MPEG-4 video") or the AVC standard ("AVC
video") and/or (ii) decoding MPEG-4 or AVC
video that was encoded by a consumer
engaged in a personal and non-commercial
activity and/or was obtained from a video
provider licensed by MPEG LA to provide
MPEG-4 and/or AVC video. No license is
granted or shall be implied for any other use.
Additional information including that relating
to promotional, internal and commercial uses
and licensing may be obtained MPEG LA,
L.L.C. ("See http://www.mpegla.com "). MPEG
Layer-3 audio decoding technology licensed
from Fraunhofer IIS and Thomson.
･ Other product and company names
mentioned herein may be the trademarks of
their respective owners.
In context, TM and ® mark are omitted.
･ Any rights not expressly granted herein are
reserved. All other trademarks are property of
their respective owners.
SIM unlock
This terminal supports SIM unlock. If you
release SIM lock, you can use SIM by a carrier
other than NTT DOCOMO.
･ The SIM unlock service is provided at a
docomo Shop.
･ A SIM unlock charge is separately required.
･ If you use a SIM other than by DOCOMO, LTE
system is not available. Available services and
functions will be limited. DOCOMO is not
liable to any failures or malfunctions.
･ For details of SIM unlock, refer to NTT
DOCOMO website.
Appendix/Index 246
Index
About phone ････････････････････････ 149
Access point
Block access point change ････････････ 123
Initializing ･････････････････････････ 124
Setting････････････････････････････ 122
Accessibility ･････････････････････････ 148
Account setting
Facebook･･････････････････････････ 136
Google ･･･････････････････････････ 135
Removing ･････････････････････････ 137
Accounts & sync ･･････････････････････ 135
Auto-sync ･････････････････････････ 138
Adjusting sound volume ･･･････････････ 125
Airplane mode ･･･････････････････････ 118
Alarm & Clock ････････････････････････ 210
Setting alarm ･･････････････････････ 210
Album ･･････････････････････････････ 188
Anshin Scan ･･････････････････････････ 71
Application screen ･････････････････････ 66
Group ･･････････････････････････ 74, 75
Learning ･･･････････････････････････ 66
Recommends ････････････････････ 66, 76
Switching ･･････････････････････････ 76
Applications ･･････････････････････････ 66
Adding to Home screen ･･･････････････ 73
Icon ･･･････････････････････････････ 67
Managing ･････････････････････････ 131
Searching ･･････････････････････････ 75
Sorting ････････････････････････････ 73
Uninstalling･････････････････ 65, 73, 132
Applications button ･････････････････ 60, 66
Apps ･･･････････････････････････････ 131
Audible touch tones ･･･････････････････ 126
AUTO-GPS ･･･････････････････････････ 134
Auto-rotate screen ･････････････････････ 38
Backlight
Turning off ･････････････････････ 30, 127
Turning on ･････････････････････ 31, 149
Backup & reset ･･･････････････････････ 146
Battery ･･････････････････････････････ 131
Battery level ･･････････････････････ 28, 149
Battery pack ･･････････････････････････ 25
Beam ････････････････････････････････ 71
Bluetooth ･･･････････････････････････ 154
Pair setting ････････････････････････ 156
Phone name ･･･････････････････････ 155
Bluetooth keyboard ････････････････････ 59
Book Store MyShelf ････････････････････ 71
Bookmark ･･･････････････････････････ 111
Bookmarking a web page ････････････ 111
Editing ････････････････････････････ 111
Opening ･･････････････････････････ 111
Brightness ･･･････････････････････････ 127
Calculator ････････････････････････････ 69
Calendar ････････････････････････････ 208
Creating schedule･･･････････････････ 208
Viewing schedule ･･･････････････････ 208
Appendix/Index 247
Call･･････････････････････････････････ 77
Declining ････････････････････････ 79, 80
Ending a call ････････････････････････ 78
Hold･･･････････････････････････････ 81
Making ･････････････････････････ 77, 80
Mute ･･････････････････････････････ 81
Receiving ･･･････････････････････ 79, 80
Speaker ････････････････････････････ 81
Call forwarding service ･･････････････････ 84
Call history ･･･････････････････････････ 82
Adding to Phonebook ････････････････ 83
Deleting ･･･････････････････････････ 83
Making a call ････････････････････････ 83
Call notification････････････････････････ 84
Call settings･･･････････････････････ 84, 125
Call Waiting ･･･････････････････････････ 84
Caller ID display request service ･･････････ 84
Caller ID notification ････････････････････ 84
Camera ･････････････････････････････ 167
Face detection ･････････････････････ 172
Front camera･･･････････････････････ 174
Front video camera ･････････････････ 182
Quick launch ･･･････････････････････ 171
Recording videos ･･･････････････････ 182
Settings (still camera) ････････････････ 177
Settings (video camera) ･･････････････ 184
Shooting still pictures ･･･････････････ 171
Smile detection ････････････････････ 173
Sweep Multi Angle ･･････････････････ 175
Sweep Panorama ･･･････････････････ 175
3D Sweep Panorama ････････････････ 175
Character entry ････････････････････････ 40
Character mode ･･･････････ 43, 46, 49, 51
Input method ･････････････ 43, 46, 49, 51
Settings ････････････････････････････ 53
Charging ･････････････････････････････ 27
Using a PC ･･････････････････････････ 29
Using AC adapter ････････････････････ 28
Using DC adapter ････････････････････ 29
Chat ････････････････････････････････ 106
Checkbox ････････････････････････････ 39
Connected devices (Media server) ･･･････ 158
Contact Picker 2.3 ･･････････････････････ 58
Contacts ･････････････････････････････ 67
Data synchronization
Auto-sync ･････････････････････････ 138
Data usage ･･････････････････････････ 117
Date & time ･･････････････････････････ 147
Developer options ････････････････････ 149
Device ･･････････････････････････････ 125
Dial ･････････････････････････････････ 67
Disaster kit ･･･････････････････････････ 68
Display･･････････････････････････････ 127
dmarket･････････････････････････････ 160
dmenu ･･････････････････････････････ 160
docomo backup ･･･････････････････････ 67
docomo mini UIM card ･･･････････････ 18, 23
PIN ･･･････････････････････････････ 141
docomo service ･･････････････････････ 134
Download ････････････････････････････ 70
Ear speaker volume ････････････････････ 81
Early Warning "Area Mail"･･･････････････ 106
eBook Reader by Sony ･･････････････････ 68
eco mode ････････････････････････････ 71
Email ････････････････････････････････ 98
Appendix/Index 248
Deleting ･･････････････････････････ 102
Forwarding ････････････････････････ 101
Initial settings ･･･････････････････････ 98
Receiving ･････････････････････････ 100
Replying ･･････････････････････････ 101
Saving attachment file ･･･････････････ 101
Sending ････････････････････････････ 99
Email account
Adding ･･･････････････････････････ 103
Changing ･････････････････････････ 102
Deleting ･･････････････････････････ 104
Emergency call ････････････････････････ 77
English guidance ･･････････････････････ 84
Evernote ･････････････････････････････ 71
Facebook････････････････････････････ 136
FM radio ････････････････････････････ 166
Foursquare ･･････････････････････････ 199
Gmail ･･･････････････････････････････ 105
Google ･････････････････････････････ 135
Google Maps･････････････････････････ 204
Current location ････････････････････ 205
Directions ･････････････････････････ 206
Google Latitude ････････････････････ 207
Layers ････････････････････････････ 206
Street View ････････････････････････ 205
Google Talk ･･････････････････････････ 106
Google+ ･････････････････････････････ 71
GPS function ･････････････････････････ 202
Enabling GPS function ･･･････････････ 204
Enabling Wireless networks ･･･････････ 204
Handwriting input ･････････････････････ 51
HDMI ･･･････････････････････････････ 193
HighlightCam ･････････････････････････ 71
Home application ･･･････････････････ 60, 76
Home screen ･･････････････････････････ 60
Adding ････････････････････････････ 64
Deleting ･･･････････････････････････ 64
Folder ･････････････････････････････ 63
Group ･････････････････････････････ 64
Kisekae ････････････････････････････ 63
Learning ･･･････････････････････････ 60
List ････････････････････････････････ 61
Shortcut ････････････････････････ 61, 65
Sorting ････････････････････････････ 65
Wallpaper ･･････････････････････････ 63
Widget ･････････････････････････ 62, 65
IC Tag/Barcode Reader ･･････････････････ 69
i-Channel ･････････････････････････････ 67
i-concier ･････････････････････････････ 67
Index character ････････････････････････ 38
Initial settings ･････････････････････････ 31
Internal storage ･･････････････････････ 129
Format ････････････････････････････ 130
International call ･･･････････････････････ 78
International roaming ･･････････････････ 71
International roaming service ･･･････････ 216
International roaming setting ･･･････････ 222
Japanese syllabary keyboard ･････････････ 49
Appendix/Index 249
K
Keys ･････････････････････････････････ 36
Kisekae ･･････････････････････････････ 63
Koe-no-Takuhaibin ･････････････････････ 84
Landscape view ･･･････････････････････ 38
Language & input ･････････････････････ 145
Let's start PSM･････････････････････････ 69
Light sensor ･･････････････････････････ 22
Link ････････････････････････････････ 110
LiveWare manager ･････････････････････ 70
Location information ･･････････････････ 202
Location services ･････････････････････ 139
Location-based Wi-Fi ･･････････････････ 122
Machi-chara ･･････････････････････････ 67
Map Application ･･･････････････････････ 71
Media Go････････････････････････････ 154
Media Player ･････････････････････････ 195
Play list ･･･････････････････････････ 198
Media player
Playback ･･････････････････････････ 196
Memo ･･･････････････････････････････ 69
Message (SMS) ････････････････････････ 95
Deleting message ････････････････････ 98
Deleting thread ･････････････････････ 98
New registration of contact ････････････ 97
Receiving ･･････････････････････････ 96
Sending ････････････････････････････ 95
Setting･････････････････････････････ 97
Messenger ･･･････････････････････････ 71
MHL ････････････････････････････････ 193
microSD card ･････････････････････ 24, 129
Format ････････････････････････････ 130
microUSB cable･･･････････････････････ 150
Missed call････････････････････････････ 83
mixi ････････････････････････････････ 199
Mobile BRAVIA Engine ･････････････････ 127
mopera U ･･･････････････････････････ 124
mopera U Mail ･･･････････････････････ 104
Movies ･･･････････････････････････････ 68
Moving data ･････････････････････････ 150
Music Unlimited ･･･････････････････････ 68
My profile ････････････････････････････ 90
Name card creator ･････････････････････ 71
Network connection settings････････････ 112
Network mode ･･･････････････････････ 220
Network service ･･･････････････････････ 84
Notification icon ･･･････････････････････ 33
Notification LED ･･･････････････････････ 36
Notification panel ･･････････････････････ 35
Notification ringtone ･･････････････････ 126
Nuisance call blocking service ････････････ 84
OfficeSuite ･･････････････････････････ 215
Omakase Lock ････････････････････････ 139
Online dictionary ･･････････････････････ 57
Osaifu-Keitai ･････････････････････････ 162
Osaifu-Keitai Lock Settings ･･･････････ 164
Own number ･･････････････････ 6, 90, 149
PC Companion ･･････････････････ 151, 236
Appendix/Index 250
Personal ････････････････････････････ 134
Personal Unblocking Key (PUK code) ･････ 141
Phone language ･･････････････････････ 145
Phonebook ･･･････････････････････････ 85
Accounts to display ･･････････････････ 87
Adding a new entry ･･････････････････ 86
Combining ･････････････････････････ 90
Communication ･････････････････････ 85
Contacts display order ････････････････ 87
Deleting ･･･････････････････････････ 90
Editing ･････････････････････････････ 89
Exporting ･･････････････････････････ 92
Favorites ･･･････････････････････････ 89
Groups ････････････････････････････ 88
Importing ･･････････････････････････ 93
Making a call ････････････････････････ 87
My profile ･･････････････････････････ 90
Ringtone ･･･････････････････････････ 90
Searching ･･････････････････････････ 87
Sending ････････････････････････････ 91
Setting photo ･･･････････････････････ 89
Phonebook list screen ･･････････････････ 85
Phonepad keyboard ････････････････････ 43
PIN code ････････････････････････････ 141
Play Movies ･･･････････････････････････ 70
Play Store ･･･････････････････････････ 161
Deleting ･･････････････････････････ 162
Installing ･･････････････････････････ 161
Playing video ････････････････････････ 190
POBox Touch User Guide ････････････････ 59
Preferred apps settings ･････････････ 60, 134
Proximity sensor ･･･････････････････････ 22
PUK code
Personal Unblocking Key (PUK code) ･･･ 141
QWERTY keyboard ･････････････････････ 46
Radio button ･･････････････････････････ 39
Recent calls screen ･････････････････････ 82
Recording videos ･････････････････････ 182
Remote operation settings ･･････････････ 84
Remote support ･･･････････････････････ 70
Reset ･･･････････････････････････････ 146
Ringtone setting ･･････････････････････ 126
Ringtone volume ･･････････････････ 79, 125
Schedule ･････････････････････････････ 69
Screen lock ･･･････････････････････ 30, 142
Changing ･････････････････････････ 143
Setting････････････････････････････ 143
Unlocking ･････････････････････････ 143
Screen lock setting ････････････････････ 128
Screenshot ･･･････････････････････････ 38
SD card backup ･･･････････････････････ 213
Searching ････････････････････････････ 39
Voice search ････････････････････････ 39
Second call settings ････････････････････ 84
Security ･････････････････････････････ 139
Security code
Network security code ･･･････････････ 140
PIN code ･･････････････････････････ 141
Setting menu ････････････････････････ 112
Setup guide ･･････････････････････････ 31
Shabette-Key-Nyuryoku ･････････････････ 40
Shooting still pictures ･････････････････ 171
Silent mode･･････････････････････････ 126
Appendix/Index 251
SIM card lock ･････････････････････････ 141
Software keyboard ･････････････････････ 41
Software update ･･････････････････････ 234
Sound ･･････････････････････････････ 125
Specific Absorption Rate of Mobile Phone
TrackID ･･････････････････････････････ 68
Transferring data ･････････････････････ 150
Troubleshooting ･･････････････････････ 225
Turning power on/off ･･･････････････････ 30
Twitter ･･････････････････････････････ 199
Specification ･････････････････････････ 237
sp-mode ････････････････････････････ 124
sp-mode mail ･････････････････････････ 95
Status bar ････････････････････････････ 33
Status icon ･･･････････････････････････ 33
Stereo Headset with Microphone
････････････････････････････････････
････････････････････････････ 80,
240
166, 188
Stopwatch ･･･････････････････････････ 212
Storage ･････････････････････････････ 129
System ･･････････････････････････････ 147
Tethering ････････････････････････････ 120
USB tethering ･･････････････････････ 120
Wi-Fi tethering ･････････････････････ 121
Theme ･･････････････････････････････ 127
Timer ･･･････････････････････････････ 213
Timescape ･･･････････････････････････ 199
Filter ･････････････････････････････ 200
Setting･･･････････････････････ 199, 202
Tile ･･･････････････････････････････ 200
ToruCa ･･････････････････････････････ 165
Touch screen ･･････････････････････････ 37
Drag･･･････････････････････････････ 37
Flick ･･･････････････････････････････ 37
Pinch ･･････････････････････････････ 37
Scroll ･･････････････････････････････ 37
Tap ････････････････････････････････ 37
Touch ･････････････････････････････ 37
Update Center ･･･････････････････････ 234
USB connection ･･･････････････････ 29, 150
USB keyboard ･････････････････････････ 59
USB storage･･････････････････････････ 129
Format ････････････････････････････ 130
User dictionary ････････････････････････ 56
English user dictionary ････････････････ 56
Japanese user dictionary ･･････････････ 56
User dictionary settings ･････････････････ 56
Backing up and restoring ･･････････････ 57
Vibration ････････････････････ 97, 126, 210
Video Unlimited ･･･････････････････････ 68
Viewing photos ･･････････････････････ 189
Voice mail service ･･････････････････････ 84
VPN ････････････････････････････････ 119
WALKMAN ････････････････････････････ 68
Wallpaper ････････････････････････････ 63
Web browser ･････････････････････････ 108
Adding a tab ･･･････････････････････ 108
Adjusting settings ･･････････････････ 109
Closing ･･･････････････････････････ 108
Copying text ･･･････････････････････ 109
Displaying ･････････････････････････ 108
Appendix/Index 252
Exiting ････････････････････････････ 108
Going back to the previous page ･･････ 108
Moving ･･･････････････････････････ 108
Opening ･･････････････････････････ 108
Searching text･･････････････････････ 109
Setting home page ･･････････････････ 110
Switching tabs ･････････････････････ 108
Zooming in/out ････････････････････ 109
Web history ･･････････････････････････ 111
Wi-Fi ･･･････････････････････････････ 112
Sleep policy ･･･････････････････････ 116
Wi-Fi Direct ･･････････････････････････ 122
Wireless & networks ･･･････････････････ 112
Word suggestion ･･････････････････････ 55
Words by learning ･････････････････････ 56
WORLD CALL ･････････････････････････ 78
World clock ･･････････････････････････ 211
WORLD WING ････････････････････････ 216
xLOUD ･･････････････････････････････ 125
Xperia ･･････････････････････････････ 134
Xperia Chinese keyboard ････････････････ 40
Xperia Japanese keyboard ･･･････････････ 40
Setting･････････････････････････････ 53
Xperia keyboard ･･･････････････････････ 40
Xperia Start Up ････････････････････････ 70
YouTube ････････････････････････････ 191
Appendix/Index 253
Make various applications or charge your billing plan, check your charges and points, and more online.
sp-mode: dmenu ⇒ " お客様サポートへ (To Customer support)" ⇒ " 各種お申込・お手続き (Various applications/procedures)"
PC: My docomo (http://www.mydocomo.com/) ⇒ 各種お申込・お手続き (Various applications/procedures)
(In Japanese only)
* When using with sp-mode, "Network security code" is required.
* When using with sp-mode, you may be charged.
* "docomo ID and password" are required for use.
* Please contact "General Inquiries" described on the last page of this manual if you forget or do not have "docomo ID and password".
* May not be available in some cases depending on the conditions of your subscription.
* There are cases where the site may not be available due to system maintenance, etc.
Don't forget your mobile phone ... or your manners!
Remember to be courteous to others when you use your terminal.
Turn the power off when you are:
Keep your voice and ring tone down
■
■
In places where use is prohibited
Be sure to switch the power off in an aircraft or a
hospital.
* Turn off your terminal even in hospital lobbies
and waiting rooms as well as hospital wards if
electronic medical devices may be in use near
you.
■ In crowded places such as peak-hour trains if
implanted electronic medical devices may be in
use near you
Radio waves emitted by the terminal may
adversely affect implanted pacemakers and ICDs
when used in close proximity.
■ Driving
Using a handheld mobile phone while driving will
result in a penalty.
However, absolutely necessary cases such as
rescue of a sick person or maintaining public's
safety are exempted.
■ In places such as theaters, cinemas, and art
galleries
Using the terminal in a public place, where you
need to be quiet, annoys people around you.
Keep your voice down in quiet places like
restaurants and hotel lobbies.
■ If you are in an outdoor public place, make sure
you do not disturb others.
Respect privacy
Please be considerate of the privacy of
individuals around you when taking and
sending photos using camera-equipped
mobile phones.
Have good manners
The terminal is equipped with useful functions
not to answer an incoming call or to mute the
sound.
【Vibrate】(P.126)
Vibrates when there is an incoming call.
【Silent mode】(P.126)
Silent mode mutes the sounds of the terminal such
as the keypad sounds and the ring tone.
* Shutter sound cannot be muted.
You can also use optional services such as the
Voice Mail Service (P.84) and Call Forwarding
Service (P.84).
General Inquiries

0120-005-250 (toll free)
Repairs
■From DOCOMO mobile phones (In Japanese only)
(No prefix) 113 (toll free)
*Service available in: English, Portuguese, Chinese, Spanish, Korean.
*Unavailable from part of IP phones.
(Business hours: 9:00 a.m. to 8:00 p.m.)
*Unavailable from land-line phones, etc.
*Unavailable from land-line phones, etc.
*Unavailable from part of IP phones.
(Business hours: 24 hours (open all year round))
■From DOCOMO mobile phones (In Japanese only)
(No prefix) 151 (toll free)
■From land-line phones (In Japanese only)
■From land-line phones (In Japanese only)
0120-800-000 (toll free)
0120-800-000 (toll free)
*Unavailable from part of IP phones.
(Business hours: 9:00 a.m. to 8:00 p.m. (open all year round))
●Please confirm the phone number before you dial.
●For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo
Shop etc. near you on the NTT DOCOMO website.
NTT DOCOMO website http://www.nttdocomo.co.jp/english/
Loss or theft of terminal or payment of cumulative cost overseas
Failures encountered overseas


(available 24 hours a day)
(available 24 hours a day)
From DOCOMO mobile phones
From DOCOMO mobile phones
International call access code
for the country you stay
-81-3-6832-6600* (toll free)
International call access code
for the country you stay
-81-3-6718-1414* (toll free)
*You are charged a call fee to Japan when calling from a land-line phone, etc.
*If you use SO-01E, you should dial the number +81-3-6832-6600
(to enter '＋', touch and hold '0').
*You are charged a call fee to Japan when calling from a land-line phone, etc.
*If you use SO-01E, you should dial the number +81-3-6718-1414
(to enter '＋', touch and hold '0').
From land-line phones
From land-line phones


Universal number international
prefix
Universal number international
prefix
-8000120-0151*
*You might be charged a domestic call fee according to the call rate for
the country you stay.
*For international call access codes for major countries and universal number
international prefix, refer to DOCOMO International Services website.
●If you lose your terminal or have it stolen, immediately take
the steps necessary for suspending the use of the terminal.
●If the terminal you purchased is damaged, bring your terminal
to a repair counter specified by DOCOMO after returning to Japan.
-8005931-8600*
*You might be charged a domestic call fee according to the call rate for
the country you stay.
*For international call access codes for major countries and universal number
international prefix, refer to DOCOMO International Services website.
Samples
■Sony Mobiles Communications Japan, Inc
Inquiries: Customer support center (In Japanese only)
0120-111-156 Available also from
mobile phones, IP phones.
٧When using your mobile phone in a public place, don’t forget to From part of IP phones, 0466-31-2516
show common courtesy and consideration for others around you. ●Please confirm the phone number before you dial.
(Business hours: Weekdays 10:00 to 18:00,
We collect old phones, etc. regardless of brands and
Saturday/Sunday/National holidays 10:00 to 17:00)
manufacturers. Bring them to your nearest docomo Shop.
Website http://www.sonymobile.co.jp/
*Items to be collected: mobile phones, PHS, battery packs,
chargers, desktop holders (regardless of brands and manufacturers)
Don’t forget your mobile phone・・・or your manners!
Sales: NTT DOCOMO, INC.
Manufacturer: Sony Mobile
Communications Japan, Inc
Li-ion 00
’
12.07 (1st Edition) 1265-0305.1
Radio Wave Exposure and
Specific Absorption Rate
(SAR) Information
United States
THIS PHONE MODEL HAS BEEN
CERTIFIED IN COMPLIANCE WITH THE
GOVERNMENT'S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
The SO-01E mobile phones have been
designed to comply with applicable
safety requirements for exposure to
radio waves. Your wireless phone is a
radio transmitter and receiver. It is
designed to not exceed the limits* of
exposure to radio frequency (RF) energy
set by governmental authorities. These
limits establish permitted levels of RF
energy for the general population. The
guidelines are based on standards that
were developed by international
scientific organizations through periodic
and thorough evaluation of scientific
studies. The standards include a safety
margin designed to assure the safety of
all individuals, regardless of age and
health.
The radio wave exposure guidelines
employ a unit of measurement known as
the Specific Absorption Rate (SAR). Tests
for SAR are conducted using
standardized methods with the phone
transmitting at its highest certified
power level in all used frequency bands.
While there may be differences between
the SAR levels of various phone models,
they are all designed to meet the
relevant guidelines for exposure to radio
waves. For more information on SAR,
please refer to the safe and efficient use
chapter in the User Guide.
The highest SAR value as reported to the
authorities for this phone model when
tested for use by the ear is 0.94 W/kg*,
and when worn on the body is 0.81 W/
kg* for speech and 1.35 W/kg* for data
calls. For body-worn operation, the
phone has been tested when positioned
a minimum of 15 mm from the body
without any metal parts in the vicinity of
the phone or when properly used with
an appropriate Sony Mobile
Communications AB accessory and worn
on the body.
For devices which include "WiFi hotspot"
functionality, SAR measurements for the
device operating in WiFi hotspot mode
were taken using a separation distance
of 10 mm.
付録／索引
Use of third-party accessories may result
in different SAR levels than those
reported.
Telecommunications & Internet
Association (CTIA) website at http://
www.ctia.org/.
** Before a phone model is available for
sale to the public in the US, it must be
tested and certified by the Federal
Communications Commission (FCC) that
it does not exceed the limit established
by the government-adopted
requirement for safe exposure*. The
tests are performed in positions and
locations (i.e., by the ear and worn on
the body) as required by the FCC for
each model. The FCC has granted an
Equipment Authorization for this phone
model with all reported SAR levels
evaluated as in compliance with the FCC
RF exposure guidelines. While there may
be differences between the SAR levels of
various phones, all mobile phones
granted an FCC equipment
authorization meet the government
requirement for safe exposure. SAR
information on this phone model is on
file at the FCC and can be found under
the Display Grant section of http://
www.fcc.gov/oet/ea/fccid/ after
searching on FCC ID PY7PM-0070.
Additional information on SAR can be
found on the Cellular
In the United States and Canada, the SAR limit
for mobile phones used by the public is 1.6
watts/kilogram (W/kg) averaged over one
gram of tissue. The standard incorporates a
margin of safety to give additional protection
for the public and to account for any
variations in measurements.
** This paragraph is only applicable to
authorities and customers in the United
States.
Europe
This mobile phone model SO-01E has
been designed to comply with
applicable safety requirements for
exposure to radio waves. These
requirements are based on scientific
guidelines that include safety margins
designed to assure the safety of all
persons, regardless of age and health.
The radio wave exposure guidelines
employ a unit of measurement known as
the Specific Absorption Rate, or SAR.
Tests for SAR are conducted using
standardized methods with the phone
transmitting at its highest certified
power level in all used frequency bands.
While there may be differences between
the SAR levels of various phone models,
付録／索引
they are all designed to meet the
relevant guidelines for exposure to radio
waves.
For more information on SAR, please
refer to the safety chapter in the User's
Guide.
SAR data information for residents in
countries that have adopted the SAR
limit recommended by the International
Commission of Non-lonizing Radiation
Protection (ICNIRP), which is 2 W/kg
averaged over ten (10) gram of tissue
(for example European Union, Japan,
Brazil and New Zealand):
The highest SAR value for this model
phone tested by Sony Mobile
Communications AB for use at the ear is
0.94 W/kg (10g).
付録／索引
FCC Statement for the USA
This device complies with Part
15 of the FCC rules. Operation is
subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
Any change or modification not
expressly approved by Sony Mobile
Communications AB may void the user's
authority to operate the equipment.
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
･ Reorient or relocate the receiving
antenna.
･ Increase the separation between the
equipment and receiver.
･ Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
･ Consult the dealer or an experienced
radio/TV technician for help.
付録／索引
Declaration of Conformity
for SO-01E
We, Sony Mobile Communications AB
of Nya Vattentornet SE-221 88 Lund,
Sweden declare under our sole
responsibility that our product
Sony type PM-0070-BV and in
combination with our accessories, to
which this declaration relates is in
conformity with the appropriate
standards EN 301 511:V9.0.2, EN 301
489-7:V1.3.1, EN 301 908-1:V5.2.1, EN
301 908-2:V5.2.1, EN 301 908-13:V5.2.1,
EN 301 893:V1.6.1, EN 301 489-24:V1.5.1,
EN 300 440-2:V1.4.1, EN 301 4893:V1.4.1, EN 300 328:V1.7.1, EN 301 48917:V2.1.1, EN 302 291-2:V1.1.1, EN
62209-1:2006 and EN 609501:2006+A11:2009+A1:2010+A12:2011,
following the provisions of Radio
Equipment and Telecommunication
Terminal Equipment Directive 1999/5/
EC
Pär Thuresson,
Quality Officer, Head of Quality &
Validation
われわれは R ＆ TTE 指令の要求事項を満たし
ています（1999/5/EC）
We fulfill the requirements of the R＆TTE
Directive (1999/5/EC)
Lund, September 2012
付録／索引
Legal-Leaflets---Generic_EN(12M)_1222-9266.9.pdf 1 of 2
checked by a certified service partner before charging or
using it.
Sony Consumer Web site
At www.sonymobile.com/support there is a support
section where help and tips are only a few clicks away.
Here you will find the latest computer software updates
and tips on how to use your product more efficiently.
Important information
Recommendations for care and safe use of our
products
• Handle with care and keep in a clean and dust-free
place.
• Warning! May explode if disposed of in fire.
• Do not expose to liquid or moisture or excess humidity.
• For optimum performance, the product should not
be operated in temperatures below -10°C(+14°F)
or above +45°C(+113°F). Do not expose the
battery to temperatures above +60°C(+140°F).
• Do not expose to flames or lit tobacco products.
• Do not drop, throw or try to bend the product.
• Do not paint or attempt to disassemble or modify
the product. Only Sony authorised personnel
should perform service.
• Consult with authorised medical staff and the instructions
of the medical device manufacturer before using the
product near pacemakers or other medical devices or
equipment.
• Discontinue use of electronic devices, or disable the radio
transmitting functionality of the device, where required or
requested to do so.
• Do not use where a potentially explosive atmosphere
exists.
• Do not place the product, or install wireless equipment, in
the area above an air bag in a car.
• Caution: Cracked or broken displays may create sharp
edges or splinters that could be harmful upon contact.
• Do not use the Bluetooth Headset in positions where it is
uncomfortable or will be subject to pressure.
Service and support
You have access to a portfolio of exclusive service
advantages such as:
• Global and local Web sites providing support.
• A global network of Contact Centers.
• An extensive network of Sony service partners.
• A warranty period. Learn more about the warranty
conditions in theLimited warrantysection.
At www.sonymobile.com/support, you can find the latest
support tools and information. For operator-specific
services and features, please contact your network
operator.
You can also contact our Contact Centers. If your
country/region is not represented in the list below, please
contact your local dealer. (Calls are charged according to
national rates, including local taxes, unless the phone
number is a toll-free number.)
If your product needs service, please contact the dealer
from whom it was purchased, or one of our service
partners. For warranty claims, save proof of purchase.
Guidelines for Safe and Efficient Use
Please follow these guidelines. Failure to do so might
entail a potential health risk or product malfunction. If
in doubt as to its proper function, have the product
Children
Warning! Keep out of the reach of children. Do not
allow children to play with mobile phones or accessories.
They could hurt themselves or others. Products may
contain small parts that could become detached and
create a choking hazard.
Power supply (Charger)
Connect the charger to power sources as marked on the
product. Do not use outdoors or in damp areas. Do not
alter or subject the cord to damage or stress. Unplug the
unit before cleaning it. Never alter the plug. If it does not fit
into the outlet, have a proper outlet installed by an
electrician. When a power supply is connected there is a
small drain of power. To avoid this small energy waste,
disconnect the power supply when the product is fully
charged. Use of charging devices that are not Sony
branded may pose increased safety risks.
Battery
New or idle batteries can have short-term reduced
capacity. Fully charge the battery before initial use. Use for
the intended purpose only. Charge the battery in
temperatures between +5°C(+41°F) and +45°C(+113°F).
Do not put the battery into your mouth. Do not let the
battery contacts touch another metal object. Turn off the
product before removing the battery. Performance
depends on temperatures, signal strength, usage patterns,
features selected and voice or data transmissions. Only
Sony service partners should remove or replace built-in
batteries. Use of batteries that are not Sony branded may
pose increased safety risks. Replace the battery only with
another Sony battery that has been qualified with the
product per the standard IEEE-1725. Use of an unqualified
battery may present a risk of fire, explosion, leakage or
other hazard.
Caution: Do not use GPS functionality in a manner which
causes distraction from driving.
Personal medical devices
Mobile phones may affect implanted medical equipment.
Reduce risk of interference by keeping a minimum distance
of 15 cm(6 inches) between the phone and the device. Use
the phone at your right ear. Do not carry the phone in your
breast pocket. Turn off the phone if you suspect
interference. For use in proximity to personal medical
devices, please consult a physician and the device
manufacturer.
Emergency calls
Calls cannot be guaranteed under all conditions. Never rely
solely upon mobile phones for essential communication.
Calls may not be possible in all areas, on all networks, or
when certain network services and/or phone features are
used.
Driving
Some vehicle manufacturers forbid the use of phones in
their vehicles unless a handsfree kit with an external
antenna supports the installation. Check with the vehicle
manufacturer's representative to be sure that the mobile
phone or Bluetooth handsfree will not affect the electronic
systems in the vehicle. Full attention should be given to
driving at all times and local laws and regulations restricting
the use of wireless devices while driving must be observed.
GPS/Location based functions
Some products provide GPS/Location based functions.
Location determining functionality is provided “As is” and
“With all faults”. Sony does not make any representation or
warranty as to the accuracy of such location information.
Use of location-based information by the device may not
be uninterrupted or error free and may additionally be
dependent on network service availability. Please note that
functionality may be reduced or prevented in certain
environments such as building interiors or areas adjacent
to buildings.
not attempt to remove internal batteries. Internal batteries
shall be removed only by a waste treatment facility or
trained service professional.
Memory card
If the product comes complete with a removable memory
card, it is generally compatible with the handset purchased
but may not be compatible with other devices or the
capabilities of their memory cards. Check other devices for
compatibility before purchase or use. If the product is
equipped with a memory card reader, check memory card
compatibility before purchase or use.
Memory cards are generally formatted prior to shipping.
To reformat the memory card, use a compatible device. Do
not use the standard operating system format when
formatting the memory card on a PC. For details, refer to
the operating instructions of the device or contact
customer support.
Accessories
Use only Sony branded original accessories and certified
service partners. Sony does not test third-party
accessories. Accessories may influence RF exposure,
radio performance, loudness, electric safety and other
areas. Third-party accessories and parts may pose a risk
to your health or safety or decrease performance.
Accessible Solutions/Special Needs
In the US, compatible Sony Xperia phones may offer
compatibility with TTY terminals (with use of necessary
accessory). For more information call the Sony Special
Needs Center on 877 878 1996 (TTY) or 877 207 2056
(voice), or go to www.sonyericsson-snc.com.
SIM card
If your phone is equipped with a standard-sized SIM card
slot, inserting an incompatible SIM card (for example, a
micro SIM card, a micro SIM card with a non-Sony
adapter, or a standard SIM card cut into a micro SIM card
size) in the SIM card slot may damage your SIM card or
your phone permanently. Sony does not warrant and will
not be responsible for any damage caused by use of
incompatible or modified SIM cards.
Disposal of old electrical and electronic
equipment and batteries
The crossed-out bin symbol on batteries and electronic
equipment means that electronic equipment and batteries
should not be disposed of with household waste but
should be left at an appropriate collection point for
recycling. By recycling our products you will help to
prevent potential negative consequences for the
environment and human health. Check local regulations
and the location of collection points for used electronic
equipment and batteries by contacting your local city
office, your household waste disposal service, the shop
where you purchased the product, by calling a Sony
Contact Center or at www.sonymobile .com/recycling. Do
For Devices Supporting 3D Viewing capabilities
In viewing 3D images shot with this phone on a 3Dcompatible monitor, you may experience discomfort in the
form of eye strain, fatigue, or nausea. To prevent these
symptoms, we recommend that you take regular breaks.
the Software, or modify the Software. You are entitled to
transfer rights and obligations to the Software to a third
party, solely together with the Device with which you
received the Software, provided the third party agrees in
writing to be bound by the terms of this Licence.
This licence exists throughout the useful life of this
Device. It can be terminated by transferring your rights to
the Device to a third party in writing.
Failure to comply with any of these terms and conditions
will terminate the licence immediately.
Sony and its third party suppliers and licensors retain all
rights, title and interest in and to the Software. To the
extent that the Software contains material or code of a
third party, such third parties shall be beneficiaries of these
terms.
This licence is governed by the laws of Sweden. When
applicable, the foregoing applies to statutory consumer
rights.
In the event Software accompanying or provided in
conjunction with your device is provided with additional
terms and conditions, such provisions shall also govern
your possession and usage of the Software.
Export regulations
Export regulations: Goods delivered under this Agreement
may be the subject to import and export regulations of the
European Union, the United States and other countries.
Purchaser will comply with these applicable laws and
regulations and will obtain and maintain any export and
import license required for the delivery of goods to
Purchaser under this Agreement. Without limiting the
foregoing, and as an example, Purchaser will not
knowingly export or re-export goods to destinations
12
March 19, 2012 13:36:13
identified pursuant to Articles in Chapter II of European
Council Regulation (EC) 428/2009 and specifically, and
without limitation, Purchaser will also comply with U.S.
government Export Administration Regulations (“EAR”, 15
C.F.R. §§ 730-774, http://www.bis.doc.gov/) administered
by Department of Commerce, Bureau of Industry and
Security and economic sanctions regulations (30 C.F.R. §§
500 et. seq., http://www.treas.gov/offices/enforcement/
ofac/) administered by the U.S. Department of Treasury,
Office of Foreign Assets Control.
Limited Warranty
Sony Mobile Communications AB, SE-221 88 Lund,
Sweden, (Sony) or its local affiliated company, provides
this Limited Warranty for your mobile phone, original
accessory delivered with your mobile phone, and/or your
mobile computing product (hereinafter referred to as
“Product”).
Should your Product need warranty service, please
return it to the dealer from whom it was purchased, or
contact your local Sony Contact Center (national rates may
apply) or visit www.sonymobile.com to get further
information.
Our warranty
Subject to the conditions of this Limited Warranty, Sony
warrants this Product to be free from defects in design,
material and workmanship at the time of its original
purchase by a consumer. This Limited Warranty will last for
a period of one (1) year as from the original date of
purchase of the Product.
13
Sony Mobile Communications AB
SE-221 88 Lund, Sweden
1222-9266.9
level can be well below this value. There is no proof of
difference in safety based on difference in SAR value.
Products with radio transmitters sold in the US must be
certified by the Federal Communications Commission
(FCC). When required, tests are performed when the
phone is placed at the ear and when worn on the body.
For body-worn operation, the phone has been tested
when positioned a minimum of 15 mm from the body
without any metal parts in the vicinity of the phone or when
properly used with an appropriate Sony accessory and
worn on the body. When operating with “Hotspot”
functionality engaged, a separation distance of 10mm was
used.
For more information about SAR and radio frequency
exposure, go to: www.sonymobile.com/health.
Flight mode
Bluetooth and WLAN functionality, if available in the device,
can be enabled in Flight mode but may be prohibited
onboard aircraft or in other areas where radio
transmissions are prohibited. In such environments, please
seek proper authorisation before enabling Bluetooth or
WLAN functionality even in Flight mode.
Radio Frequency (RF) exposure and Specific
Absorption Rate (SAR)
When the phone or Bluetooth handsfree is turned on, it
emits low levels of radio frequency energy. International
safety guidelines have been developed through periodic
and thorough evaluation of scientific studies. These
guidelines establish permitted levels of radio wave
exposure. The guidelines include a safety margin designed
to assure the safety of all persons and to account for any
variations in measurements.
Specific Absorption Rate (SAR) is used to measure radio
frequency energy absorbed by the body when using a
mobile phone. The SAR value is determined at the highest
certified power level in laboratory conditions, but because
the phone is designed to use the minimum power
necessary to access the chosen network, the actual SAR
from opening or responding to messages from unknown
sources, using trustworthy services to access the Internet,
and only downloading content to the mobile phone from
known, reliable sources.
Antenna
Use of antenna devices not marketed by Sony could
damage the phone, reduce performance, and produce
SAR levels above the established limits. Do not cover the
antenna with your hand as this affects call quality, power
levels and can shorten talk and standby times.
www.sonymobile.com
Malware
Malware (short for malicious software) is software that can
harm the mobile phone or other computers. Malware or
harmful applications can include viruses, worms, spyware,
and other unwanted programs. While the device does
employ security measures to resist such efforts, Sony does
not warrant or represent that the device will be impervious
to the introduction of malware. You can however reduce
the risk of malware attacks by using care when
downloading content or accepting applications, refraining
However, you need to determine for yourself the length
and frequency of breaks you require, as they vary
according to the individual. If you experience any type of
discomfort, stop viewing the 3D images until you feel
better, and consult a physician as necessary. Also refer to
the operating instructions supplied with the device or
software you have connected or are using with this phone.
Note that a child’s eyesight is still at the development
stage (particularly children below the age of 6). Consult a
pediatrician or ophthalmologist before letting your child
view 3D images, and make sure he/she observes the
above precautions when viewing such images.
Warning!
If the device requires an adapter for insertion into the
handset or another device, do not insert the card directly
without the required adapter.
Precautions on memory card use
• Do not expose the memory card to moisture.
• Do not touch terminal connections with your hand or any
metal object.
• Do not strike, bend, or drop the memory card.
• Do not attempt to disassemble or modify the memory
card.
• Do not use or store the memory card in humid or
corrosive locations or in excessive heat such as a closed
car in summer, in direct sunlight or near a heater, etc.
• Do not press or bend the end of the memory card
adapter with excessive force.
• Do not let dirt, dust, or foreign objects get into the insert
port of any memory card adapter.
• Check you have inserted the memory card correctly.
10
What we will do
If, during the warranty period, this Product fails to operate
under normal use and service, due to defects in design,
materials or workmanship, Sony authorised distributors or
service partners, in the country/region* where you
purchased the Product, will, at their option, either repair or
replace the Product in accordance with the terms and
conditions stipulated herein.
Sony and its service partners reserve the right to charge
a handling fee if a returned Product is found not to be
under warranty according to the conditions below.
Please note that some of your personal settings,
downloads and other information may be lost when your
Sony Product is repaired or replaced. At present, Sony
may be prevented by applicable law, other regulation or
technical restrictions from making a backup copy of certain
downloads. Sony does not take any responsibility for any
lost information of any kind and will not reimburse you for
any such loss. You should always make backup copies of
all the information stored on your Sony Product such as
downloads, calendar and contacts before handing in your
Sony Product for repair or replacement.
Conditions
1. This Limited Warranty is valid only if the original proof of
purchase for this Product issued by a Sony authorised
dealer specifying the date of purchase and serial
number**, is presented with the Product to be repaired or
replaced. Sony reserves the right to refuse warranty
service if this information has been removed or changed
after the original purchase of the Product from the dealer.
2. If Sony repairs or replaces the Product, the repair for the
defect concerned, or the replaced Product shall be
warranted for the remaining time of the original warranty
14
• Insert the memory card as far as it will go into any
memory card adapter needed. The memory card may not
operate properly unless fully inserted.
• We recommend that you make a backup copy of
important data. We are not responsible for any loss or
damage to content you store on the memory card.
• Recorded data may be damaged or lost when you
remove the memory card or memory card adapter, turn
off the power while formatting, reading or writing data, or
use the memory card in locations subject to static
electricity or high electrical field emissions.
Protection of personal information
Erase personal data before disposing of the product. To
delete data, perform a master reset. Deleting data from the
phone memory does not ensure that it cannot be
recovered. Sony does not warrant against recovery of
information and does not assume responsibility for
disclosure of any information even after a master reset.
Loudness warning!
Avoid volume levels that may be harmful to your hearing.
End User Licence Agreement
Software delivered with this device and its media is owned
by Sony Mobile Communications AB, and/or its affiliated
companies and its suppliers and licensors.
Sony grants you a non-exclusive limited licence to use
the Software solely in conjunction with the Device on which
it is installed or delivered. Ownership of the Software is not
sold, transferred or otherwise conveyed.
Do not use any means to discover the source code or
any component of the Software, reproduce and distribute
11
period or for ninety (90) days from the date of repair,
whichever is longer. Repair or replacement may involve
the use of functionally equivalent reconditioned units.
Replaced parts or components will become the property
of Sony.
3. This warranty does not cover any failure of the Product
due to normal wear and tear, or due to misuse, including
but not limited to use in other than the normal and
customary manner, in accordance with the Sony
instructions for use and maintenance of the Product. Nor
does this warranty cover any failure of the Product due to
accident, software or hardware modification or
adjustment, acts of God or damage resulting from liquid.
A rechargeable battery can be charged and discharged
more than a hundred times. However, it will eventually
wear out – this is not a defect and corresponds to normal
wear and tear. When the talk-time or standby time is
noticeably shorter, it is time to replace the battery. Sony
recommends that you use only batteries and chargers
approved by Sony.
Minor variations in display brightness and colour may
occur between phones. There may be tiny bright or dark
dots on the display. It occurs when individual dots have
malfunctioned and can not be adjusted. Two defective
pixels are deemed acceptable.
Minor variations in camera image appearance may
occur between phones. This is nothing uncommon and is
not regarded as a defective camera module.
4. Since the cellular system on which the Product is to
operate is provided by a carrier independent from Sony,
Sony will not be responsible for the operation, availability,
coverage, services or range of that system.
15
Legal-Leaflets---Generic_EN(12M)_1222-9266.9.pdf 2 of 2
5. This warranty does not cover Product failures caused by
installations, modifications, or repair or opening of the
Product performed by a non-Sony authorised person.
6. The warranty does not cover Product failures which have
been caused by use of accessories or other peripheral
devices which are not Sony branded original accessories
intended for use with the Product.
7. Tampering with any of the seals on the Product will void
the warranty.
8. THERE ARE NO EXPRESS WARRANTIES, WHETHER
WRITTEN OR ORAL, OTHER THAN THIS PRINTED
LIMITED WARRANTY. ALL IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY. IN NO
EVENT SHALL SONY OR ITS LICENSORS BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF
ANY NATURE WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOST PROFITS OR COMMERCIAL LOSS
TO THE FULL EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW.
Some countries/states do not allow the exclusion or
limitation of incidental or consequential damages, or
limitation of the duration of implied warranties, so the
preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s
statutory rights under applicable legislation in force, nor the
consumer’s rights against the dealer arising from their
sales / purchase contract.
*Geographical scope of the warranty
If you have purchased your Product in a country member
of the European Economic Area (EEA) or in Switzerland or
the Republic of Turkey, and such Product was intended for
sale in the EEA or in Switzerland or in Turkey, you can have
your Product serviced in any EEA country or in Switzerland
or in Turkey, under the warranty conditions prevailing in the
country in which you require servicing, provided that an
identical Product is sold in such country by an authorised
Sony distributor. To find out if your Product is sold in the
country you are in, please call the local Sony Contact
Center. Please observe that certain services may not be
available outside the country of original purchase, for
example, due to the fact that your Product may have an
interior or exterior which is different from equivalent models
sold in other countries. Please note in addition that it may
sometimes not be possible to repair SIM-locked Products.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. If you
purchased your product in Australia, you are entitled to a
replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure. For warranty
service in Australia, please contact 1300 650 050 or Sony
Service Centre, 320 Princes Hwy, ROCKDALE NSW 2216.
** In some countries/regions additional information (such
as a valid warranty card) may be requested.
Central and
Southern
Africa
1-800-084-9518 (Toll questions.CO@support.sonymobile.com
Free)
+27 11 506 0123
questions.CF@support.sonymobile.com
844 550 055
800-646-425
(número gratuito)
Colombia
01800-0966-080
(número gratuito)
Costa Rica
0 800 011 0400
(número gratuito)
Danmark
3331 2828
Deutschland 0180 534 2020
(ortsübliche
Gebühren)
Dominica
1-800-085-9518 (Toll
Free)
Ecuador
1-800-0102-50
(número gratuito)
Eesti
06 032 032
Egypt/‫مصر‬
16727
Česká republika
Chile
Ελλάδα
801 11 810 810
+30 210 899 19 19 (από κινητό
τηλέφωνο)
El Salvador
800-6323 (número
gratuito)
902 180 576 (tarifa
local)
España
questions.CZ@support.sonymobile.com
questions.CO@support.sonymobile.com
questions.CO@support.sonymobile.com
questions.CO@support.sonymobile.com
questions.DK@support.sonymobile.com
questions.DE@support.sonymobile.com
questions.CO@support.sonymobile.com
questions.CO@support.sonymobile.com
questions.EE@support.sonymobile.com
questions.EG@support.sonymobile.com
questions.GR@support.sonymobile.com
questions.CO@support.sonymobile.com
questions.ES@support.sonymobile.com
20
Venezuela
Việt Nam
България
Россия
Україна
‫الردن‬
0-800-1-00-2250
(número gratuito)
1900 1525 (miễn phí)
0800 1 8778
8-800-1008022
+38 044 590 1515
+971 4 3919 880
questions.CO@support.sonymobile.com
‫المارات العربية‬
‫المتحدة‬
+971 4 3919 880
(UAE)
questions.AE@support.sonymobile.com
questions.VN@support.sonymobile .com
questions.BG@support.sonymobile.com
questions.RU@support.sonymobile.com
questions.UA@support.sonymobile.com
questions.JO@support.sonymobile.com
‫الكويت‬
+971 4 3919 880
questions.KW@support.sonymobile.com
‫المملكة العربية‬
‫السعودية‬
800-8200-727
questions.SA@support.sonymobile.com
中国
+86 400 810 0000
+886 2 25625511
02 2483 030
questions.CN@sonymobile.com
questions.TW@support.sonymobile.com
questions.TH@support.sonymobile.com
台灣
ไทย
24
March 19, 2012 13:36:13
Anguilla
1-800-080-9518 (Toll questions.CO@support.sonymobile.com
Free)
1-800-081-9518 (Toll questions.CO@support.sonymobile.com
Free)
Argentina
0800-333-7427
questions.CO@support.sonymobile.com
(número gratuito)
Australia
1300 650-050 (Toll
questions.AU@support.sonymobile.com
Free)
The Bahamas 1-800-205-6062 (Toll questions.CO@support.sonymobile.com
Free)
Barbados
1-800-082-9518 (Toll questions.CO@support.sonymobile.com
Free)
Belgique/
02-0745 1611
questions.BE@support.sonymobile.com
België
Belize
AN 815, PIN 5597
questions.CO@support.sonymobile.com
(Toll Free)
Bermuda
1-800-083-9518 (Toll questions.CO@support.sonymobile.com
Free)
Bolivia
800-100-542
questions.CO@support.sonymobile.com
(número gratuito)
Brasil
4001-0444 (Capitais questions.BR@support.sonymobile.com
e regiões
metropolitanas)
0800 884 0444
(Demais regiões)
Canada
1 866 766 9374 (Toll questions.CA@support.sonymobile.com
Antigua and
Barbuda
Trademarks and acknowledgements
The Liquid Identity logo and Xperia are trademarks or
registered trademarks of Sony Mobile Communications
AB.
Sony is a trademark or a registered trademark of Sony
Corporation.
16
Cayman
Islands
Ericsson is a trademark or registered trademark of
Telefonaktiebolaget LM Ericsson.
Bluetooth is a trademark or a registered trademark of
Bluetooth SIG Inc. and any use of such mark by Sony is
under license.
Other product and company names mentioned herein
may be the trademarks of their respective owners.
Any rights not expressly granted herein are reserved.
Free / sans frais)
18
17
France
questions.FR@support.sonymobile.com
09 69 32 21 21
09 69 32 21 22
(Xperia™ uniquement)
Guatemala
1-800-300-0057
questions.CO@support.sonymobile.com
(número gratuito)
Haïti/Ayiti
questions.CO@support.sonymobile.com
AN 193, PIN 5598
(numéro gratuit /
nimewo gratis)
Honduras
questions.CO@support.sonymobile.com
AN 8000122, PIN
5599 (número
gratuito)
Hong Kong/香 +852 8203 8863
questions.HK@support.sonymobile.com
港
Hrvatska
062 000 000
questions.HR@support.sonymobile.com
questions.IN@support.sonymobile.com
India/भारत
1800 11 1800 (Toll
Free)
+91 (011) 39011111
Indonesia
021 2701388
questions.ID@support.sonymobile.com
Ireland
1850 545 888 (Local questions.IE@support.sonymobile.com
rate)
Italia
06 48895206 (tariffa questions.IT@support.sonymobile.com
locale)
Jamaica
1-800-442-3471 (Toll questions.CO@support.sonymobile.com
Free)
0800 90 909
questions.CY@support.sonymobile.com
Κύπρος/
Kıbrıs
Latvija
67 21 43 01
questions.LV@support.sonymobile.com
Lietuva
8 700 55030
questions.LT@support.sonymobile.com
Magyarország 01 880 47 47
questions.HU@support.sonymobile.com
21
Malaysia
1800-88-9900 (Toll
Free / bebas tol)
Maroc/‫ المغرب‬+212 2 2958 344
México
0 1800 000 4722
(número gratuito)
Nederland
0900 8998318
Nederlandse 001-866-509-8660
Antillen
(gratis nummer)
New Zealand 0800-100-150 (Toll
Free)
Nicaragua
AN 1800-0166, PIN
5600 (número
gratuito)
Norge
815 00 840
(lokaltakst)
Österreich
0810 200 245
Pakistan/
021 - 111 22 55 73
‫پاکستان‬
Panamá
00800-787-0009
(número gratuito)
Paraguay
009 800 54 20032
(número gratuito)
Perú
0800-532-38
(número gratuito)
Philippines/ +63 2 7891860
Pilipinas
Polska
+48 22 22 77 444
Portugal
808 204 466
(chamada local)
questions.MY@support.sonymobile.com
questions.MA@support.sonymobile.com
questions.MX@support.sonymobile.com
questions.NL@support.sonymobile.com
questions.CO@support.sonymobile.com
questions.NZ@support.sonymobile.com
questions.CO@support.sonymobile.com
questions.NO@support.sonymobile.com
questions.AT@support.sonymobile.com
questions.PK@support.sonymobile.com
questions.CO@support.sonymobile.com
questions.CO@support.sonymobile.com
questions.CO@support.sonymobile.com
questions.PH@support.sonymobile.com
questions.PL@support.sonymobile.com
questions.PT@support.sonymobile.com
22
19
República
Dominicana
1-800-751-3370
questions.CO@support.sonymobile.com
(número gratuito)
România
+40 21 401 0401
questions.RO@support.sonymobile.com
Saint Kitts
1-800-087-9518 (Toll questions.CO@support.sonymobile.com
and Nevis
Free)
Saint Vincent 1-800-088-9518 (Toll questions.CO@support.sonymobile.com
and the
Free)
Grenadines
Schweiz/
0848 824 040
questions.CH@support.sonymobile .com
Suisse/
Svizzera
Singapore
+65 6744 0733
questions.SG@support.sonymobile.com
Slovenia
01 600 5000
questions.SI@support.sonymobile.com
Slovensko
02 5443 6443
questions.SK@support.sonymobile.com
South Africa 0861 632222
questions.ZA@support.sonymobile.com
South Κorea/ (+82) 1588 4170
questions.KO@support.sonymobile.com
대한민국
Suomi
09 299 2000
questions.FI@support.sonymobile.com
Sverige
013 24 45 00 (lokal questions.SE@support.sonymobile.com
taxa)
Trinidad and 1-800-080-9521 (Toll questions.CO@support.sonymobile.com
Tobago
Free)
Türkiye
+90 212 473 77 77 questions.TR@support.sonymobile.com
United
08705 237 237 (Local questions.GB@support.sonymobile.com
Kingdom
rate)
United States 1 866 766 9374
questions.US@support.sonymobile.com
Uruguay
000-401-787-013
questions.CO@support.sonymobile.com
(número gratuito)
23

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Modify Date                     : 2012:09:26 22:55:14+02:00
Create Date                     : 2012:09:26 21:46:20+02:00
Metadata Date                   : 2012:09:26 22:55:14+02:00
Creator Tool                    : Adobe Acrobat 8.3 Combine Files
Format                          : application/pdf
Document ID                     : uuid:b75438da-a6d8-44db-94d2-54bb3f085d1c
Instance ID                     : uuid:a2a56fca-e8a4-4cd9-a9e5-b509f0336b71
Producer                        : Adobe Acrobat 8.3
Has XFA                         : No
Page Count                      : 133
Creator                         : Adobe Acrobat 8.3 Combine Files

EXIF Metadata provided by EXIF.tools