Sounding Audio AWM914 Car Audio with Bluetooth User Manual AWM 914 Manual
Sounding Audio Industrial Ltd. Car Audio with Bluetooth AWM 914 Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1892831 |
| Application ID | g8ypam8L64ynoBiqHZ6fdQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 165.78kB (2072228 bits) |
| Date Submitted | 2013-02-04 00:00:00 |
| Date Available | 2013-02-04 00:00:00 |
| Creation Date | 2012-12-11 16:03:38 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2013-01-31 20:40:20 |
| Document Title | AWM 914 Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | Kelly Li |
AWM914 Owner’s Manual AWM914 Table of Contents Installation ........................................................................................... 2 Wiring ................................................................................................... 3 Basic Operation .................................................................................. 4 Tuner Operation .................................................................................. 6 Bluetooth Operation ........................................................................... 7 Specifications...................................................................................... 9 ii AWM914 Thank You! Precautions Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen receiver for maximum enjoyment. • • Features Features of the Jensen AWM914 mobile audio system include: • Backlit Controls and Display • Electronic AM/FM Tuner • Bluetooth Ready with A2DP / AVRCP streaming Audio • Time/Alarm Clock • Front Aux Audio Input • 4 Speaker Output (2 zones) • • • Packing List AWM914 Use the Proper Power Supply. This product is designed to operate with a 12 volt DC, negative ground battery system (the standard system in a North American vehicle). Use Authorized Service Centers. Do not attempt to disassemble or adjust this precision product; contact a professional for assistance. Avoid Moisture. To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. Avoid Cleaning Products. The front of this unit should only be cleaned with a slightly damp cloth. Do not use cleansers. Use Recommended Accessories. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. AWM914 INSTALLATION • • • It’s a good idea to read all of the instructions before beginning the installation. We recommend having your JENSEN AWM914 installed by a reputable RV dealership. heaters Adjacent to other equipment that radiates heat Poorly-ventilated or dusty places Moist or humid locations Preparing the Opening Use the mounting hole diagram (below) to measure and cut a mounting hole, and mount the unit using the M3x20mm self-tapping screws. Tools and Supplies You will need these tools and supplies to install your AWM914: • Phillips screwdriver • Wire cutters and strippers • Tools to remove existing radio (screwdriver, socket wrench set or other tools) • Electrical tape • Crimping tool • Volt meter/test light • Crimp connections • 16 gauge wire for power connections • 16 – 18 gauge speaker wire Disconnecting the Battery To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation. NOTE: Before cutting the mounting hole, make sure the area behind the mounting location is clear of wires and fuel, vacuum and or brake lines. NOTE: If the AWM914 is to be installed in a vehicle equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit. Mounting the Radio Route power, speaker and antenna cables through the hole, and connect them to the unit as outlined in the wiring diagram. After ensuring correct connections, test operation. Select Mounting Location Select a mounting location, taking care to avoid the following: • Places exposed to heat-radiating appliances such as electric AWM914 WIRING The wiring diagram depicts all the wiring connections required for proper operation of the unit. PIN NO. 10 11 12 13 14 15 16 17 18 19 20 DETAIL A SHOWN FROM PIN VIEW WIRE COLOR FUNCTION (Label Contents) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A GRAY RIGHT(A) SPEAKER(+) GRAY/BLACK RIGHT(A) SPEAKER(-) N/A N/A WHITE/BLACK LEFT(A) SPEAKER(-) WHITE LEFT(A) SPEAKER(+) N/A N/A N/A N/A N/A N/A BLUE AMP/REMOTE(+12VDC 100MA) RED +12VDC SWITCHED BLACK GROUND VIOLET RIGHT(B) SPEAKER(+) VIOLET/BLACK RIGHT(B) SPEAKER(-) LIGHT GREEN/BLACK LEFT(B) SPEAKER(-) LIGHT GREEN LEFT(B) SPEAKER(+) AWM914 BASIC OPERATION ○ ○ ○ ○ ○ ○ ○ ○ ○ 10 ○ 11 ○ 12 ○ 13 ○ • BAL: Adjust the speaker output balance between “L7” (left) and “R7” (right). “BAL 0” indicates an equal balance between the left and right speakers. • FAD: Adjust the speaker fade between “R7” (rear) and “F7” (front). “FAD 0” indicates an equal balance between the rear and front speakers. Use the VOL +/- to make adjustments in each menu item Power Press the POWER button (4) to turn the unit on or to enter standby mode. Volume Control • • Press the VOL + to increase the volume output. Press and hold the VOL + to increase the volume output continuously. Press the VOL - to decrease the volume output. Press and hold the VOL - to decrease the volume output continuously. Liquid Crystal Display (LCD) Back Light • Dimmer: Adjust the brightness of the LCD from “LIGHT 9” (brightest) to “LIGHT 0” (off). Mode / Menu NOTE: When subjected to cold temperatures for an extended period of time, LCD panels will take longer to illuminate and the display visibility may slightly decrease. Optimal LCD operation will return to normal when the temperature increases to a normal range. Press the MODE/MENU button (7) to switch to radio mode or auxiliary input function. Long press the MODE/MENU button (7) to choose the following menu list: Audio Adjustment • BAS: Adjust the Bass level from “-7” to “+7”. • TRE: Adjust the treble from “-7” to “+7”. • BAL: Adjust the speaker output balance between “L7” (left) and AWM914 Sleep Mode • Sleep: The Sleep Timer will automatically turn off the AWM914 in the designated number of minutes. To set the Sleep Time, press VOL +/- repeatedly to change the sleep time from 0(off), 15, 30 or 60 minutes. Auxiliary Input Connector Connect the device to the AUX IN connector (6) on the front panel, and then press MODE/MENU to switch to auxiliary input mode. Setting the alarm • Alarm ON/OFF: Press VOL +/- to turn on and off the alarm. The “ALARM” icon will show on the display. • Alarm Hour: The number representing the hours will flash. Press VOL +/- to adjust the alarm hour. • Alarm MIN: The number representing the minutes will flash. Press VOL +/- to adjust the alarm minute. Clock Display Reset • RESET: Press 6/ENTER button (11) to reset to factory default settings. Display will show “OK” when Reset is accomplished. This function will time out after 5 seconds of inactivity and the unit will resume normal operation. Press the T/F button (12) to alternate the display between Playback mode and clock time while in Tuner, Bluetooth or auxiliary input mode. Clock Setup Press the MUTE/LOUD button (13) to silence the audio output in tuner, Bluetooth or auxiliary/input mode. Press again to restore the previous volume level. Press and hold the MUTE/LOUD button to toggle the Loudness function on/off. Display will show “LOUD” when on. Press and hold the T/F button (12) to access Clock Setup mode. The number representing the hours will flash. Press VOL +/- buttons to adjust the hour. Press T/F again briefly and the number representing the minutes will flash. Press the VOL +/- buttons to adjust the minutes. The new time will be saved 5 seconds after the last adjustment is made. Auxiliary Input Function Speaker Output Mute / Loudness The two speaker output buttons (5) (SPEAKER A and SPEAKER B) control speaker output from the radio. Press any of the two buttons to turn the corresponding speaker sets on or off. Press the MODE/MENU button (7) to directly access auxiliary input modes from any other mode when a portable audio device is connected to the unit. To connect a portable audio device, insert a standard 3.5 mm (audio line output or headphone output from your portable CD / MP3 / iPod or other media player) into the AUX IN connector (6) on the front of the unit. Display will show when on. AWM914 TUNER OPERATION Preset Scan Press A/PS to scan all preset stations in the current band. The unit will play each station for five seconds before moving on to the next station. To stop this function and play the current station, press the A/PS button again. Select a Band Press BAND (3) to change between three FM bands (FM1, FM2 and FM3) and two AM bands (AM1 and AM2). Tuning Manual Tuning Press the tune up (1) or tune down (2) buttons to tune the frequency one step higher or lower. Press and hold to seek tune to next strong station. Preset Stations Store Preset Stations Six numbered preset buttons store and recall stations for each AM and FM band. To store a station, select a band (if needed), then select a station. Hold a preset button for one second. The current station will be stored, and the corresponding preset number will appear in the display. Recall Preset Stations To recall a station, select a band (if needed). Press a preset button momentarily, and the unit will tune to the corresponding stored station. Automatic Store / Preset Scan (A / PS) Automatically Stores Press and hold the A/PS button (8) for more than one second, and the unit will automatically scan for and store six strong stations for all bands. To stop this function before the automatic storing is complete, press A/PS again. AWM914 BLUETOOTH OPERATION BT Audio (A2DP) The AWM914 includes built-in Bluetooth technology that allows you to connect this head unit to Bluetooth devices for streaming audio playback. The A2DP music is available for Bluetooth enabled phones when the phone is connected. To access Bluetooth mode and play songs stored on your phone, press the button (10). While in BT mode , the “BT AUDIO” is displayed on the LCD. About Bluetooth Technology Selecting Tracks During playback, press the tune up >>| (1) or tune down |<< (2) to play the previous or next track. Bluetooth is a short-range wireless radio connectivity technology developed as a cable replacement for various electronic devices. Bluetooth operates in 2.4 GHz frequency range and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2,000 companies worldwide. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks is under license. Other trademarks and trade names are those of their respective owners. Pausing Playback During playback, press the number button 1/ to pause the BT AUDIO player. Press number button 1/ again to resume playback. If you change to another mode, the mobile phone audio will pause. Press the button (10) to return to BT mode and resume mobile phone audio playback. NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the device is disconnected inadvertently, the unit will automatically search for the matching BT mobile phone when the power is restored. Pairing a Bluetooth Device Before you begin, consult the owner’s manual for the Bluetooth device you want to pair. 1. Make sure the device you want to pair is on and ready to receive a signal from the AWM914. To begin pairing, press and hold the button (10). The unit will automatically attempt to pair to available devices. When pairing with a smartphone, the AWM914 becomes “discoverable” by your smartphone and can be paired using the phone menu. 2. When the Bluetooth device has completed its search, the mobile phone will display the Bluetooth device name (AWM914). 3. Select AWM914. 4. Enter the pairing password (0000), if requested. 5. If successful, the unit will display “PAIR OK”. After connecting successfully, you are able to listen to music stored on your Bluetooth enabled device through the radio. Bluetooth Menu Options 1. Press the button (10) to enter menu adjustment mode. 2. With “Device” displayed, press the VOL +/- (9) buttons to select. 3. Press the VOL +/- buttons to view paired BT devices and press 6/ENTER button (11) to select. 4. Once a device is selected, press the VOL +/- buttons to choose one of the following options: connect/disconnect, lock/unlock or delete (delete displays only if the device is not connected). • LOCK/UNLOCK: The AWM914 can store up to 5 devices for BT connection. The devices are stored in FIFO (First In First Out) order. To prevent a device from being bumped from the list when more than 5 devices are used, you must lock the device. AWM914 To Lock/Unlock a device, press the 6/ENTER button. DISCONNECT: To disconnect a paired device, press the 6/ENTER button to temporarily remove the BT link. The link can be re-established through your phone menu by selecting the AWM914 for connection. • DELETE: To delete a device from the list, press the 6/ENTER button. 5. Press the 6/ENTER button to enter. • AWM914 SPECIFICATIONS NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. General Power Supply Requirements. . . . . . . . . . . . . . . . DC 12 Volts, Negative Ground Operating Voltage . . . . . . . .. . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .10-16VDC Overall Dimensions. . . . . .. .. . . .. . . . . . . .. . 10-7/16"(W) x 2-2/3”(H) x 3-2/3"(D) Mounting Dimensions . . .. . . . . . . . . . . . . . . . . .. . . 9-3/8"(W) x 1-7/8"(H) x 3"(D) Weight . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . 1.0 lbs.(0.42 Kg) However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: FM Tuner Tuning range. . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . 87.5-107.9Mhz Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <5uV Stereo separation @ 1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >30dB AM Tuner Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected. Consult the dealer or an experienced radio/TV technician for help. Tuning range. . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . .530-1710Khz Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <30uV Amplifier Output Power . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . 4 x 6 Watts per Channel Output Impedance . . . . . . . . . . . . . . . . . . . .Compatible with 4-8 Ohm Speakers, 4 Ohm Load Minimum Total system power . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . 24 Watts Maximum This Transmitter must be installed to provide a separation distance of at least 20 cm from all person Specifications subject to change without notice. FCC Warnings This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. www.asaelectronics.com www.jensenrvdirect.com © 2012 ASA Electronics Corporation v.121112
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Create Date : 2012:12:11 16:03:38+08:00 Creator Tool : Microsoft® Word 2010 Modify Date : 2013:01:31 20:40:20+08:00 Metadata Date : 2013:01:31 20:40:20+08:00 Format : application/pdf Description : AWM 914 Creator : Kelly Li Title : AWM 914 Manual Keywords : AWM914 Producer : Microsoft® Word 2010 Document ID : uuid:cd20a087-314e-45dc-a7a7-d74bbe831578 Instance ID : uuid:7487d02a-f8fd-4919-8f01-90baaee060ce Page Count : 12 Language : zh-HK Author : Kelly Li Subject : AWM 914EXIF Metadata provided by EXIF.tools