Southwire 16040T True RMS MultiMeter User Manual
Southwire Co. True RMS MultiMeter
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3012979 |
| Application ID | DoCaCUrXEH1ii13uu2JSNQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 92kB (1150002 bits) |
| Date Submitted | 2016-06-01 00:00:00 |
| Date Available | 2016-06-01 00:00:00 |
| Creation Date | 2016-06-01 15:06:29 |
| Producing Software | GPL Ghostscript 9.0 |
| Document Lastmod | 2016-06-01 15:06:29 |
| Document Title | User manual.pdf |
| Document Creator | PDFCreator Version 1.2.0 |
| Document Author: | ferry-al |
3/16 Rev. 0 16040T manual The BluetoothÂŽ word mark and logos are registered trademarks of Bluetooth SIG, Inc. and any use of such marks by Southwire Company, LLC is under license. Contents Made in China Product distributed by Southwire Company, LLC One Southwire Drive, Carrollton, GA 30119 Š2016 Southwire Company, LLC. All rights reserved. LĂnea de Ayuda TĂŠcnica Gratuita Toll Free Technical Help 1-855-SW-T00LS southwiretools.com Back 10A MAX MIN TESTING EQUIPMENT E361819 ⢠actual manual size 4.25âW X 5.6875âH Instrucciones completas de operaciĂłn estĂĄn disponibles en espaĂąol en la pĂĄgina de exhibiciĂłn del producto en SouthwireTools.com. UL61010-1 MODE 16040T 16040T True RMS Multimeter with MApp⢠Mobile App Operating Instructions Front Introduction ŕ Ž9LHK\UKLYZ[HUKHUKMVSSV^:HML[`9\SLZHUK6WLYH[PUN0UZ[Y\J[PVUZPU this manual before using this meter. ŕ Ž;OLTL[LYÂťZZHML[`MLH[\YLZTH`UV[WYV[LJ[[OL\ZLYPMUV[\ZLKPU HJJVYKHUJL^P[O[OLTHU\MHJ[\YLYÂťZPUZ[Y\J[PVUZ ŕ Ž,UZ\YL[OH[[OL[LZ[SLHKZHYLM\SS`ZLH[LKPU[OLPUW\[QHJRZHUKRLLW fingers away from the metal probe tips when taking measurements. ŕ Ž)LMVYLJOHUNPUNM\UJ[PVUZ\ZPUN[OLZLSLJ[VYZ^P[JOHS^H`ZKPZJVUULJ[ the test leads from the circuit under test. ŕ ŽOL[OLY:V\[O^PYLYLWHPYZ or replaces the product will be a determination that Southwire makes at its sole discretion. SOUTHWIRE MAKES NO WARRANTY THAT THE PRODUCT WILL BE MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE. SOUTHWIRE MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED, OTHER THAN THE WARRANTY SPECIFICALLY SET FORTH HEREIN. SOUTHWIRE WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES FOR ANY BREACH OF THIS WARRANTY. This warranty is void if this product is used for rental purposes. No product YLZLSSLYPZH\[OVYPaLK[VL_[LUKHU`V[OLY^HYYHU[`VU:V\[O^PYLÂťZILOHSM relating to this product, and no such reseller warranty will be binding on :V\[O^PYL0M`V\OH]LH^HYYHU[`JSHPTVYPM[OLWYVK\J[ULLKZ[VIL serviced during or after the warranty period set forth above, please contact [OL*\Z[VTLY:LY]PJL+LWHY[TLU[H[ :>;663: The sender is responsible for all shipping, freight, insurance, and packaging costs associated with sending a product to Southwire. Southwire will not be responsible for lost or damaged products returned pursuant to this warranty. All products returned to Southwire under this warranty should be mailed to: LIMITED WARRANTY AND LIMITATION OF LIABILITY ON SOUTHWIRE METERS & TESTERS Register your product purchase at www.southwiretools.com. At Southwire, we are dedicated to providing you with the best customer experience. By following a few quick steps to register, you can experience quicker service, more efficient support, and receive information on our future products. Simply WYV]PKL`V\YTVKLSU\TILYZLYPHSU\TILYHUKQ\Z[HML^WPLJLZVM information about yourself â it is that quick and easy. Input Protection: Capacitance Function Input Protection: Resistance Function 1Ί 10Ί 100Ί 1kΊ 10kΊ 4.000kΊ 40.00kΊ 400.0kΊ 4.000MΊ 40.00MΊ 0.001ÂľF 0.01ÂľF 0.1ÂľF 1ÂľF 4.000ÂľF 40.00ÂľF 400.0ÂľF 4000ÂľF 17 0.1nF 250V RMS or 250V DC 10pF 400.0nF Resolution 40.00nF Range 250V RMS or 250V DC 0.1Ί Resolution 400.0Ί Range Specifications cont. Âą(5.0% +5 digits) Âą(4.0% +5 digits) Âą(3.0% +5 digits) Âą(5.0% +35 digits) Accuracy Âą (% of reading + digits) Âą(3.5% +5 digits) Âą(1.5% +5 digits) Âą(1.0% + 4 digits) Accuracy Âą (% of reading + digits) Storage Temperature Storage Humidity Operating Altitude Dimensions/ Weight Safety Operating Temperature Operating Humidity Insulation Diode Test Continuity Test Low Battery Indication Display Over Range Indication Polarity Measurement Rate Auto Power Off Input Impedance AC Response AC Bandwidth Batteries Fuses 600V AC RMS/600V DC 600 V AC RMS/600V DC 250V AC RMS/250V DC 500mA 600V fast acting fuse 10A 600V fast acting fuse (30 seconds max. every 15 minutes) Maximum Input Class 2, Double insulation Test current 0.3mA typical, open circuit voltage < 3.3V Audible signal if the resistance is approx. 50Ί or less â â is displayed 4000 count LCD display âOLâ is displayed Minus symbol â-â is displayed for negative polarity 2 readings per second, nominal After approx. 15 minutes of inactivity 10MΊ (VDC & VAC) True RMS 50/60Hz Two âAAAâ 1.5V batteries ÂľA. mA ranges: 500mA/600V (5 x 20mm) fast blow fuse 10A range: 10A/600V (5 x 20mm) fast blow 41°F to 104°F (5°C to 40°C) Max 80% up to 87°F (31°C) decreasing linearly to 50% at 104°F(40°C) -4°F to 140°F (-20°C to 60°C) <80%) 2000 meters 4.8â x 2.6â x 1.4â/0.32lb (121 x 67 x 35mm/140g) Complies with UL 61010-1 v.3 for measurement Category lll 600V, Polution Degree 2 General Specifications Voltage AC or DC Frequency, Duty Cycle Resistance, Continuity, Diode Test, Capacitance ÂľA, mA Current AC or DC 10A Current AC or DC Function Input Limits Indicates the terminal(s) so marked must not be connected to a circuit where the voltage with respect to earth ground exceeds the maximum safety rating of the meter - Equipment in fixed installations such as 3-phase motors, switchgear and distribution panels - Lighting circuits in commercial buildings - Feeder lines in industrial plants - Any device or branch circuit that is close to a CAT III source Three phase circuits and single phase lighting circuits in commercial buildings CAT III Insulated Tip Removed CAT II 1000V CAT IV 600V CAT III 1000V WARNING: Operation is limited to CAT II applications when the insulated tips are removed from one or both test probes. Refer to Input Limits section in this manual for maximum voltage ratings. Test Leads Insulated Tip On The measurement category (CAT) rating and voltage rating is determined by a combination of the meter, test probes and any accessories connected to the meter and test probes. The combination rating is the LOWEST of any individual component. - Household appliances, power tools - Outlets more than 30ft (10m) from a CAT III source - Outlets more than 60ft (20m) from a CAT IV source Typical Applications Single phase receptacles and connected loads Brief Description CAT II Category Rating Safety Category Ratings 600V MAX Equipment is protected by double or reinforced insulation Indicates hazardous voltages may be present Potential danger. Indicates the user must refer to the manual for important safety information International Safety Symbols 0.1mA 400.0mA 10mA 1Âľ 10ÂľA 10.00A 0.1ÂľA 4000ÂľA 40.00mA Resolution 400.0ÂľA Range Input Protection: DC Current Function 10ÂľA 0.1mA 40.00mA 400.0mA 16 ÂľA/mA ranges: 500mA/600V Fuse 10A range: 10A/600V Fuse 10mA 1ÂľA 4000Âľ 10.00A 0.1ÂľA Resolution 400.0ÂľA Range All AC current ranges are specified from 5% to 100% of range. Input Protection: ÂľA/mA ranges: 500mA/600V Fuse 10A range: 10A/600V Fuse AC Current 50/60Hz Function Specifications cont. Âą(2.5% +5 digits) Âą(1.5% +3 digits) Âą(1.0% +3 digits) Accuracy Âą (% of reading + digits) Âą(3.0% +7 digits) Âą(2.5% +5 digits) Âą(2.0% +5 digits) Accuracy Âą (% of reading + digits) 1mV 10mV 0.1V 1V 40.00V 400.0V 600V Resolution 4.000V Range Input Protection: % Duty Cycle Pulse width: >100us, <100ms; Frequency width: 5Hz â 150kHz Sensitivity: >1V RMS Function Input Protection: Frequency Sensitivity: 100V < 50Hz 50V 50 to 400Hz 5V > 400Hz to 4000Hz Function Input Protection: DC Voltage Function 10mV 0.1V 1V 40.00V 400.0V 600V 0.001Hz 0.01Hz 0.1Hz 1Hz Resolution 0.1% Resolution 15 600V RMS or 600V DC 20.0% to 80.0% Range 600V RMS or 600V DC 9.999Hz 99.99Hz 999.9Hz 9.999kHz Range 600V RMS or 600V DC 0.1mV 1mV Resolution 400.0mV 4.000V Range All AC voltage ranges are specified from 5% to 100% of range. Input Protection: 600V RMS or 600V DC AC Voltage 50/60Hz Function Âą(1.2% +5 digits) Accuracy Âą (% of reading + digits) Âą(1.0% +5 digits) Accuracy Âą (% of reading + digits) Âą(1.2% +3 digits) Âą(1.0% +3 digits) Accuracy Âą (% of reading + digits) Âą(1.0% +8 digits) Âą(1.2% +5 digits) Âą(1.0% +5 digits) Accuracy Âą (% of reading + digits) Accuracy is given at 65°F to 83°F (18°C to 28°C), less than 70% relative humidity Specifications cont. FCC ID: 2AENI-16040T / IC: 20144-16040T This Multimeter is designed to provide years of dependable service, if the following care instructions are performed: 1. KEEP THE METER DRY. If it gets wet, wipe it off. 2. USE AND STORE THE METER IN NORMAL TEMPERATURES. Temperature extremes can shorten the life of the electronic parts and distort or melt plastic parts. 3. HANDLE THE METER GENTLY AND CAREFULLY. Dropping it can damage the electronic parts or the case. 4. KEEP THE METER CLEAN. Wipe the case occasionally with a damp cloth. DO NOT use chemicals, cleaning solvents, or detergents. 5. USE ONLY FRESH BATTERIES OF THE RECOMMENDED SIZE AND TYPE. Remove old or weak batteries so they do not leak and damage the unit. 6. IF THE METER IS TO BE STORED FOR A LONG PERIOD OF TIME, the batteries should be removed to prevent damage to the unit. Maintenance LeprĂŠsent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio Exempts de licence. L'exploitation est autorisĂŠe aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioĂŠlectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement." DĂŠclaration dâexposition aux radiations : Ce produit est conforme aux limites dâexposition pour les appareils portables RF pour le Canada ĂŠtablies pour un environnement non contrĂ´lĂŠ. Le produit est sĂťr pour un fonctionnement comme dĂŠcrit dans ce manuel. La rĂŠduction aux expositions RF peut ĂŞtre augmentĂŠe si lâappareil peut ĂŞtre conservĂŠ aussi loin que possible du corps de lâutilisateur. DĂŠclaration de conformitĂŠ dâIndustrie Canada This device complies with RSS247 of Industry Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Complies with Radiation Exposure Statement: This product complies with the Canadian portable RF exposure limit set forth for an uncontrolled environment and is safe for its intended operation as described in this manual. IDA Standards Further RF exposure reduction can be achieved if the product is kept as far as possible from the userâs body. DA107392 IC Statement Warning: Changes or modifications to this unit not expressly approved by the Southwire Co. could void the userâs authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ⢠Reorient or relocate the receiving antenna. ⢠Increase the separation between the equipment and receiver. ⢠Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ⢠Consult the dealer or an experienced radio/TV technician for help. The device must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement ÂŽ 9. -SHZOSPNO[)S\L[VV[O button 7. 5. 4. 3. 7. COM input jack /63+)HJRSPNO[I\[[VU 2. 1. =ÂŁ/a mA input jack 5. 10A input jack 3. MODE button 4. Rotary function switch MODE 10A MAX MIN 16040T 6. 9. 8. WARNING F10A/600V F500mA/600V TO AVOID ELECTRIC SHOCK, REMOVE TEST LEADS BEFORE OPENING CASE OR FUSE COVER 14 WARNING: To avoid electric shock, do not operate meter until battery and fuse covers are securely fastened to the meter. 1. Loosen the one Phillips screw on the fuse cover. 2. Remove the fuse cover. 3. Gently remove fuse and install new fuse into the holder. 4. Always use a UL recognized fuse of the proper size and value: 500mA/600V (5 x 20mm) fast blow for the ÂľA/mA ranges and 10A/600V (5 x 20mm) fast blow for the 10A range. 5. Install the fuse cover and tighten the screw. WARNINGS: To avoid electric shock, remove the test leads from the meter before removing the battery or fuse covers.. WARNING 2. MAX/MIN button TO AVOID ELECTRIC SHOCK, REMOVE TEST LEADS BEFORE OPENING CASE OR BATTERY DOOR. 1. LCD display Fuse Replacement Operation cont. WARNING Meter Description TO AVOID ELECTRIC SHOCK, REMOVE TEST LEADS BEFORE OPENING CASE OR BATTERY DOOR. 13 WARNING: To avoid electric shock, do not operate meter until battery and fuse covers are securely fastened to the meter. 1. Loosen the one Phillips screw on the battery cover. 2. Remove the battery cover. 3. Replace batteries with two AAA batteries. 4. Observe proper polarity as shown inside battery compartment. 5. Install the battery cover and tighten the screw. WARNING WARNINGS: To avoid electric shock, remove the test leads from the meter before removing the battery or fuse covers. Battery Replacement Operation cont. TO AVOID ELECTRIC SHOCK, REMOVE TEST LEADS BEFORE OPENING CASE OR BATTERY DOOR. MAX/MIN AUTO Âľ OL AC DC Hz ÂŁ Volts Amperes Alternating current Direct current Minus sign Hertz (frequency) Percent (duty cycle) Ohms Continuity Diode test Farads (capacitance) nano (10-9) micro (10-6) milli (10-3) kilo (103) mega (106) Overload Auto Power Off Low battery Autoranging Display hold Maximum/Minimum BluetoothÂŽ Technology Symbols Used on LCD Display ÂŽ button. HOLD/Backlight button To freeze the reading on the LCD display, momentarily press the HOLD button. The â H â indicator will be displayed while the reading is being held. Momentarily press the HOLD button again to return to normal operation. The backlight illuminates the LCD display when the ambient light is too low to view the displayed readings. To turn the backlight on, press the HOLD button until the backlight turns on. To turn the backlight off, press the HOLD button until the backlight turns off. To turn the flashlight on and off, momentarily press the Visit nextgenmeters.southwiretools.com for mobile app download information. ÂŽ ÂŽ ÂŽ FLASHLIGHT / Bluetooth Button Bluetooth wireless technology allows readings to be displayed and stored on mobile devices. To activate, press and hold the button until the " " symbol appears on the LCD display. The Bluetooth function should be disabled when not connected to a mobile device in order to conserve battery power. To turn the button until the " " symbol no Bluetooth function off, press and hold the longer appears on the display. NOTE: MAX/MIN does not work on Frequency, Duty Cycle, Resistance, Continuity, Diode Test and Capacitance. MODE Button Used to select AC voltage, Frequency or % Duty Cycle, AC or DC current, and Ohms, Diode Test, Continuity or Capacitance. MAX/MIN Button 1. Momentarily press the MAX/MIN button to activate the MAX/MIN mode. âMAXâ will appear on the LCD display and the meter will display and hold the highest reading. The meter will update the reading when a higher âmaxâ occurs. 2. Momentarily press the MAX/MIN button again to view the lowest reading. âMINâ will appear on the LCD display and the meter will display and hold the lowest reading. The meter will update the reading when a lower âminâ occurs. 3. Press and hold the MAX/MIN button to end MAX/MIN and return to normal operation. Operation 10A MAX MIN 12 1. Set the rotary function switch to the position 2. Press the MODE button until the ânFâ symbol appears on the display. 3. Insert the black test lead into the COM input jack and the red test lead into the Ί input jack. 4. Touch the test lead probes to the capacitor under test. 5. Read the capacitance value on the LCD display. It may take up to a minute to get a stable reading on large capacitors. MODE WARNING: Safely discharge capacitors before taking capacitance measurements. Capacitance Measurements 10A 1. Set the rotary function switch to MODE the position. 2. Press the MODE button until the â â symbol appears on the LCD display. 3. Insert the black test lead into the COM input jack and the red test lead into the Ί input jack. 4. Touch the test lead probes to the device or wire under test. 5. A beeper will sound if the resistance is approximately 50Ί or less and the resistance value will be shown on the LCD display. MAX MIN WARNING: Never test continuity on a live circuit. Continuity Operation cont. MODE MODE 10A 16040T WIRE MAX MIN 10A 16040T MAX MIN 10A MAX MIN 10A MAX MIN 11 Forward test MODE 10A Red Probe Ί 16040T MAX MIN Reverse test 1. Set the rotary function switch to the position. MODE 2. Press the MODE button until the â â symbol appears on the LCD display. 3. Insert the black test lead into the COM input jack and the red test lead into the Ί input jack. 4. Touch the test lead probes to the diode under test. 5. Forward voltage will indicate 0.4 to 0.7 on the LCD display. Reverse voltage will indicate âOLâ. Shorted Red Black Black devices will indicate near 0 and Probe Probe Probe an open device will indicate âOLâ in both polarities. WARNING: Never test diodes in a live circuit. Diode Test MODE 1. Set the rotary function switch to the position. 2. Press the MODE button until the âΊâ symbol appears on the display. 3. Insert the black test lead into the COM input jack and the red test lead into the Ί input jack. 4. Touch the test lead probes to the component under test. If the component is installed in a circuit, it is best to disconnect one side before testing to eliminate interference with other devices. 5. Read the resistance in on the LCD display. WARNING: Never test resistance on a live circuit Resistance Measurements Operation cont. MODE 10A MAX MIN 1. Set the rotary function switch MODE to the V position. 2. Insert the black test lead into the COM input jack and the red test lead into the V input jack. 3. Touch the test lead probes to the circuit under test. Touch the red test lead to the positive side of the circuit and the black test lead to the negative side of the circuit. 4. Read the voltage on the LCD display. 10A MAX MIN WARNING: Observe all safety precautions when working on live voltages. DC Voltage Measurements 1. Set the rotary function switch to the position. 2. Insert the black test lead into the COM input jack and the red test lead into the V input jack. 3. Touch the test lead probes to the circuit under test. 4. Read the voltage on the LCD display. WARNING: Observe all safety precautions when working on live voltages. AC Voltage Measurements Operation cont. MODE MODE 10A 10A MAX MIN 16040T 16040T MAX MIN MAX MIN 10A 1. Set the rotary function switch to the position. 2. Press the MODE button once to select frequency. The âHzâ symbol will appear on the display. To select Duty Cycle, press the MODE button a second time. The â%â symbol will appear on the display. 3. Insert the black test lead into the COM input jack and the red test lead into the V input jack. 4. Touch the test lead probes to the circuit under test. 5. Read the frequency or % duty cycle on the LCD display. 6. Pressing the MODE button a third time will return the meter to the voltage function. MODE MODE 10A MAX MIN Hz 16040T 10 1. Insert the black test lead into the COM input jack. 2. For current measurements up to 10A AC/DC, set the rotary function switch to the 10A position and insert the red test lead into the 10A input jack. 3. For current measurements up to 400mA AC/DC, set the rotary function switch to the mA position and insert the red test lead into the mA input jack. 4. For current measurements up to 4000ÂľA AC/DC, set the rotary function switch to the ÂľA position and insert the red test lead into the mA input jack. 5. Press the MODE button to select AC or DC current. The âACâ or âDCâ symbol will appear on the LCD display. 6. Remove power from the circuit under test, then open up the circuit at the point where you wish to measure current. 7. Touch the test lead probes in series with the circuit being measured. For DC current, touch the red probe to the positive side of the circuit and touch the black probe to the negative side of the circuit. 8. Apply power to the circuit. 9. Read the current on the LCD display. 10A MAX MIN 10A MAX MIN 10A MAX MIN MEASUREMENTS UP TO 4000ÂľA AC/DC MODE MEASUREMENTS UP TO 400mA AC/DC MODE MEASUREMENTS UP TO 10A AC/DC MODE working on live circuits. Do not measure current on circuits that exceed 600V. Measurements in the 10A range should be limited to 30 seconds every 15minutes. WARNING: Observe all safety precautions when AC/DC Current Measurements Frequency and % Duty Cycle Measurements WARNING: Observe all safety precautions when working on live live voltages. Operation cont. Operation MODE MODE 10A 10A 10A MAX MIN MAX MIN MODE 16040T MAX MIN
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 10 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : 9c26cd5c-2a5d-11e6-0000-e2197cc7391d Producer : GPL Ghostscript 9.0 Keywords : () Modify Date : 2016:06:01 15:06:29+01:00 Create Date : 2016:06:01 15:06:29+01:00 Creator Tool : PDFCreator Version 1.2.0 Document ID : 9c26cd5c-2a5d-11e6-0000-e2197cc7391d Format : application/pdf Title : User manual.pdf Creator : ferry-al Description : () Author : ferry-al Subject :EXIF Metadata provided by EXIF.tools