Starfield Electronic ZIPE21PSLB EM3586 ZigBee Module with PA User Manual

Starfield Electronic Limited EM3586 ZigBee Module with PA

User manual

Download: Starfield Electronic ZIPE21PSLB EM3586 ZigBee Module with PA User Manual
Mirror Download [FCC.gov]Starfield Electronic ZIPE21PSLB EM3586 ZigBee Module with PA User Manual
Document ID2562575
Application ID/f2EWfIbCRUm4yy/Jvkfnw==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize27.21kB (340126 bits)
Date Submitted2015-03-22 00:00:00
Date Available2015-03-22 00:00:00
Creation Date2015-03-21 15:53:38
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2015-03-21 15:53:38
Document TitleZiP_E2 1-PSLB_Product_Specifications_v0 6.1_20150304_V2
Document CreatorpdfFactory Pro www.fineprint.cn
Document Author: huangzhuoqiang

Product Specifications
ZigBee Module - ZiP E2.1-PSLB
Revision 0.6.1
Feb 2015
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Document History
Document History
Date
Author(S)
Revision
Comments
May-2014
Honky Yau
v0.1
First release
14-July-2014
Honky Yau
v0.2
Confirmed SPI IOs pin assignment
Update Contact Information
23-July-2014
Honky Yau
v0.3
Update 3.1 RF specification
- Naming: Maximum input signal level ->
Receiver input signal level
- Max value : +5 dBm
30-Sep-2014
Honky Yau
v0.4
Update Mechanical Dimension
- Module Height: from 3.0 to 2.9mm
- Module Height tolerance: from TBD to
2.9 +/- 0.15mm
10-Feb-2015
Vincent Tse
v0.5
Updated Notice section
04-Mar-2015
Vincent Tse
v0.6
Updated Notice & Ordering Guide
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Contents
Contents
Contents ...................................................................................................................................................................... 3
1. Key Features .......................................................................................................................................................... 5
1.1. System Description.................................................................................................................................. 5
1.2. Feature ...................................................................................................................................................... 5
1.3. Block Diagram .......................................................................................................................................... 6
1.4. Module Pin Assignment .......................................................................................................................... 6
2. DC Electrical Specifications ............................................................................................................................... 10
2.1. Absolute Maximum Ratings ................................................................................................................. 10
2.2. Power consumption ............................................................................................................................... 10
2.3. nRESET Pin Characteristics ................................................................................................................ 10
3. Radio Performance.............................................................................................................................................. 11
3.1. RF Specifications ................................................................................................................................... 11
4. Environmental Specifications ............................................................................................................................. 12
4.1. Environmental Specifications ............................................................................................................... 12
5. Mechanical ............................................................................................................................................................ 13
5.1. Physical Dimensions ............................................................................................................................. 13
5.2. Recommended PCB pattern ................................................................................................................ 15
5.3. Label Drawing ........................................................................................................................................ 16
6. Ordering Guide ..................................................................................................................................................... 17
7. Notice..................................................................................................................................................................... 18
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
Contents
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Key Features
1. Key Features
1.1. System Description
ZiP E2.1 is a ZigBee module targeting for Home Automation and Smart Energy marketplaces. The module embedded
with a high performance Cortex M3 ZigBee transceiver EM3586 from Silicon Labs (SiLabs) which is fully compliant with
IEEE 802.15.4-2003 specifications. It provides a low cost, low power consumption and reliable wireless communication
solution in the 2.4GHz ISM frequency band. Customer can implement applications easily with various interfaces
provided by ZiP E2.1.
1.2. Feature
Dimensions: 27.20mm x 14.75mm x 2.90mm
SiLabs Ember EM3586 high-performance, integrated ZigBee/802.15.4 chipset
Transmit power: up to +19 dBm
Receiver sensitivity: -103dBm
Supply voltage: 2.4V to 3.6V
Security: 128-bit AES
On-board chip antenna
Serial Interface: USB/SPI/UART/I2C
ADC: 14bits ADC port
FCC & RoHS compliant
MSL JEDEC level 3
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Key Features
1.3. Block Diagram
1.4. Module Pin Assignment
Pin#
Pin Name
I/O
Description
GND
Ground
Reserved
No connection
PC4/JTMS
I/O
Programmable I/O control, or
JTAG mode select
PB0/IRQA
I/O
Programmable I/O control, or
an interrupt input
PA3/SC2_nCS
Programmable I/O control, or
External SPI serial flash, SPI nCS
PB6/ADC1/IRQB
I/O
Programmable I/O control, or
ADC input, or
an interrupt input
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
Product Specifications
ZiP E2.1-PSLB ZigBee Module
PC1/ADC3
Key Features
I/O
Programmable I/O control, or
an ADC input
SWCLK/JTCK
JTAG/Serial Wire debugging port clock
PC0/JRST/IRQD
I/O
Programmable I/O control, or
an interrupt input, or
the JTAG reset input
10
GND
Ground
11
PB5/ADC0
I/O
Programmable I/O control, or
an ADC input
12
GND
Ground
13
GND
Ground
14
GND
Ground
15
GND
Ground
16
Reserved
No Connection
17
GND
Ground
18
RFO
RF output for external antenna (option)
19
nRESET
Module reset signal (Internal pull-up)
20
GND
Ground
21
GND
Ground
22
PA3
I/O
Programmable I/O control
23
GND
Ground
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Key Features
Pin#
Pin Name
I/O
Description
24
PC6/OSC32B
I/O
Programmable I/O control, or
32.768kHZ crystal
25
PC7/OSC32A
I/O
Programmable I/O control, or
32.768kHz crystal
26
SC1SCLK/PB3
I/O
SPI port 1 clock, or
programmable I/O control
27
PA0/USBDM/SC2MOSI
Programmable I/O control, or
USB D- signal, or
External SPI serial flash SPI master data out
28
PA1/USBDP/SC2MISO
Programmable I/O control, or
USB D+ signal, or
External SPI serial flash SPI master data in
29
VBATT
PWR
Module power supply
30
PA2/SC2SCLK
Programmable I/O control, or
External SPI serial flash SPI master clock
31
PA4/ADC4
I/O
Programmable I/O control, or
ADC input
32
GND
Ground
33
PA5/ADC5/nBOOTMODE
I/O
Programmable I/O control, or
ADC input, or
Boot control, must be left open or pulled high during the
reset to enable the normal firmware boot process.
34
35
36
SC1MISO(s)/SC1MOSI(m)/
I/O
SPI port 1 MISO (slave)/ MOSI (master) signal, or
TXD/
UART TXD signal, or
SC1SDA/
I2C port 1 DATA signal, or
PB1
Programmable I/O control
SC1MOSI(s)/SC1MISO(m)/
I/O
SPI port 1 MOSI (slave)/ MISO (master) signal, or
RXD/
UART RXD signal, or
SC1SCL/
I2C port 1 CLK signal, or
PB2
Programmable I/O control
PC2/JTDO/SWO
I/O
Programmable I/O control, or
Serial Wire port OUTPUT signal, or
JTAG data out
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Key Features
Pin#
Pin Name
I/O
Description
37
SC1nSSEL/PB4
I/O
SPI port 1 slave select, or
Programmable I/O control
38
PC3/JTDI
I/O
Programmable I/O control, or
JTAG data in
39
GND
Ground
40
GND
Ground
41
GND
Ground
42
GND
Ground
43
GND
Ground
44
GND
Ground
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
Product Specifications
ZiP E2.1-PSLB ZigBee Module
DC Electrical Specifications
2. DC Electrical Specifications
2.1. Absolute Maximum Ratings
Parameters
Test Conditions
Supply voltage
Min
Max
Unit
-0.3
+3.6
(VDDmax)
Voltage on any GPIO
-0.3
VDDmax
Under no circumstances the absolute maximum ratings must be violated. Stress exceeding one or more of the limiting
values may cause permanent damage to the device.
2.2. Power consumption
VCC = 3.0V, Temperature = 25 C, FRF= 2440MHz (unless otherwise noted)
Parameters
Sleep mode
Condition
Min
Internal RC oscillator on
Typ
Max
Unit
1.2
uA
12
mA
35
mA
175
mA
Processor, radio, peripherals off
Standby mode
Processor on
Radio and peripherals off
Receive mode
Radio receive chain on
Transmit mode
+19dBm typical
Serial controller current
For each controller at maximum
data rate
0.2
mA
General purpose timer current
For each timer at maximum clock
rate
0.25
mA
General purpose ADC current
At maximum sample rate, DMA
enabled
1.1
mA
2.3. nRESET Pin Characteristics
Parameters
Reset pulse width to guarantee a reset
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
Min
Typ
Max
Unit
200
300
ns
10
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Radio Performance
3. Radio Performance
3.1. RF Specifications
VCC = 3.0V, Temperature = 25 C, Normal Mode measured at 50ohm terminal load
Parameters
Test Conditions
Frequency range
Min
Typ
2405
Max
2475
Unit
MHz
Transmitter power at maximum
+19
dBm
Receiver sensitivity
-103
dBm
Receiver input signal level
Carrier frequency error
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
-40
+5
dBm
+40
ppm
11
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Environmental Specifications
4. Environmental Specifications
4.1. Environmental Specifications
Parameters
Min
Max
Unit
Operating supply voltage
+2.4
+3.6
Operating Temperature
-40
+85
C
Storage Temperature
-40
+85
C
MSL Moisture Sensitivity Level
RoHS Restriction of Hazardous Substances
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
Compliant
12
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Mechanical
5. Mechanical
5.1. Physical Dimensions
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
13
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Mechanical
(Bottom view)
(Top view)
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
14
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Mechanical
5.2. Recommended PCB pattern
(top view)
(top view)
Notes:
To achieve best RF performance, it is recommended to follow the layout requirement as listed
1. The area in Zone1 (antenna area), all layers of customer circuit board should keep free from any metal objects
2. The area in Zone2, top layer of customer circuit board should have ground with no signal traces
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
15
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Mechanical
5.3. Label Drawing
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
16
Product Specifications
ZiP E2.1-PSLB ZigBee Module
Ordering Guide
6. Ordering Guide
Ordering Part Number
P00-BI570PB-SFM0
Description
ZiP E2.1-PSLB 2.4GHz ZigBee
module
(PA version)
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
Package Type
Tape & Reel
17
Product Specifications
ZiP E2.1-NSLB ZigBee Module
Notice
7. Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS-210 standards. Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
France
Le prsent appareil est conforme aux CNR-210 d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en
compromettre le fonctionnement.
The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device, for example, USB dongle like transmitters is forbidden.
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other
antenna
or transmitter.
Thisnot
modular
be installed and
with ain
minimum
distance of 20
cm between
the radiator
and user body.
transmitter
must
bemust
co-located
or operated
operating
conjunction
with
any other
antenna
or transmitter.
If the FCC identification number is not visible when the module is installed inside another device, then the outside of
the device into which the module is installed must also display a label referring to the enclosed module. This exterior
label can use wording such as the following: Contains Transmitter Module FCC ID: 2AD69ZIPE21PSLB Or Contains FCC
ID: 2AD69ZIPE21PSLB
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
18
Product Specifications
ZiP E2.1-NSLB ZigBee Module
Notice
When the module is installed inside another device, the user manual of this device must contain below warning
statements:
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the
user documentation that comes with the product.
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
19
Contact Information
Intercel (China) Limited
Shenzhen Office
Unit 6, 17/F, Vanta Industrial Centre,
21-33 Tai Lin Pai Road,
Kwai Chung, New Territories,
Hong Kong SAR, China
Room 1303, 13/F, West Block,
Tianan High-Tech Plaza Phase II,
Tianan Cyber Park, Futian District,
Shenzhen 518040, China
+852-2362 9018
+852Į2648 8806
+86-755-8835 3778
+86-755-8835 2489
The information in this document is believed to be accurate in all respects at the time of publication but is subject to
TM
change without notice. Intercel assumes no responsibility for errors and omissions, and disclaims responsibility for
TM
any consequences resulting from the use of information included herein. Additionally, Intercel assumes no
TM
responsibility for the functioning of undescribed features or parameters. Intercel reserves the right to make changes
TM
without further notice. Intercel makes no warranty, representation or guarantee regarding the suitability of its
TM
products for any particular purpose, nor does Intercel assume any liability arising out of the application or use of any
product or circuit, and specifically disclaims any and all liability, including without limitation consequential or
TM
incidental damages. Intercel products are not designed, intended, or authorized for use in applications intended to
TM
support or sustain life, or for any other application in which the failure of the Intercel product could create a
TM
situation where personal injury or death may occur. Should Buyer purchase or use Intercel products for any such
TM
unintended or unauthorized application, Buyer shall indemnify and hold Intercel harmless against all claims and
damages.
Intercel confidential
This document is the sole and exclusive property of Intercel.
Not to be distributed or divulged without prior written agreement.
20

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : huangzhuoqiang
Create Date                     : 2015:03:21 15:53:38+08:00
Modify Date                     : 2015:03:21 15:53:38+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : pdfFactory Pro www.fineprint.cn
Metadata Date                   : 2015:03:17 13:52:29+08:00
Format                          : application/pdf
Creator                         : huangzhuoqiang
Title                           : ZiP_E2 1-PSLB_Product_Specifications_v0 6.1_20150304_V2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:bfe49185-7cdb-4cf2-9815-83ae09a114c5
Instance ID                     : uuid:1197944c-2996-49ce-80f8-e8f1763f2207
Page Count                      : 20
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AD69ZIPE21PSLB

Navigation menu