Sunmi Technology L2 Handheld Wireless Terminal User Manual L2 1011

Shanghai Sunmi Technology Co.,Ltd. Handheld Wireless Terminal L2 1011

UserManual.wiki >

Sunmi Technology >

L2 user manual 1011

Product DescriptionMain screen keySIM card slotNote: The machine must be in the power-oﬀ status during inserting or removing the SIM card. If plugging or removing is done in the power-on status, it may cause a machine stoppage.·Use a card pin to open the card cover;·Insert/remove the SIM card according to the illustrated directions;PSAM card slotUsed for inserting an encrypted PSAM CPU card.TF card slotUsed for inserting TF card.2-D Code Scanner (optional) PrecautionsWarnings· Plug the AC plug into an AC power outlet as speciﬁed on the Adapter;· Don't use in any space with explosive gas;· This product is veriﬁed as Level A, and may cause radio interference during normal use.· For avoiding unwanted radio interference, practical actions may be required.· Replace the battery: ① Replacing with an unmatched battery may result in dangerous explosion! ② Return the battery replaced to the serviceman. Don't dispose it in ﬁre!Important Safety Instructions· Try not to install or use the device during lightning, or else there would be lightning stroke danger;· When you ﬁnd unusual smell, overheat or smoke, please cut oﬀ the power immediately;Suggestions· Do not use it in extremely cold or hot conditions (e.g., near ﬁre or a lighted cigarette);· Do not drop, throw or bend it;· Try to use it in a clean and dustless environment and avoid tiny articles falling into the terminal;· Do not use it near medical equipment without permission.DeclarationThe company shall not be responsible for the following actions· Any damage caused by not using and maintaining it under the conditions described in the guide;· Any damage or problem caused by optional parts or consumptive materials (not the original products provided by t he company or approved products), the company will assume no responsibility for this. It is not allowed to modify or change the product without the consent of the company.· The operating system of this product supports oﬃcial system update. If users install ROM system from the third party or modify the system ﬁles by means of cracking, it may lead to system instability, as well as security risk and security threat.DisclaimerOwing to the update of the product, some details of this document may not be in conformity with those of the product. Please refer to the material object. The company reserves the right to interpret this document. The company reserves the right to modify this instruction book without prior notice.SIMTFPSAMVolumePower keyTouch screenCard coverEarphone socketMicrophoneSIM card, PSAM card and TF card installation instructionsFlash lightCameraFunction keySpeaker+-Function keyCapable of being conﬁgured as a code scanning key or other functions by software.Volume up/down buttonVolume adjustment.Power keyShort press: light the screen and lock the screen.Long press: under the power-oﬀ status, long press 2 to 3 seconds to power on; Under the operating status, long press 2 to 3seconds to choose power-oﬀ or restart. Under the crashed status, long press 11 seconds to automatically restart.Main screen keyWhen the screen is locked, short press to lighten the screen;After unlocked, click at any interface to return to the main screen.CameraSupportive of photographing and 1D/2D fast scanning.Flash lightFacilitating Illumination of the surrounding environment when taking photos.Card coverSIM card, PSAM card and TF card installation place.NFC readerFor reading Quick Pass bank cardsEarphone socketCapable of external access to a sound box, and access to a personal credit card POS (application program support is required)Two dimensional code scanner (optional)One dimensional bar code Infrared scanner, used for reading.Note: don't look straight at the Infrared scanning head to avoid eye injuries.Extremely easy settingsOnly a few steps to activate an intelligent business device① Set 2G/3G/4G: when power oﬀ, insert the 2G(GSM) /3G(WCDMA)/4G(TD-LTE) card and then power on. (Refer to the Technical Speciﬁcations for the support of cards)② Long press the Power Key for 2~3s to activate the backlight of screen, and then operate following the prompts after entering the startup/booting screen for the ﬁrst time. 2 modes for accessing the Internet are available.③ Set WiFi ·Click "Set" button, activate "WLAN" to enter the WLAN searching screen, and wait it to list all useable WLAN hot spots； ·Click the WLAN to be connected, and enter the access password in case of an encrypted network.Download/use AppsAfter connected to the Internet, open the App Market, ﬁnd, download and install the Apps.FAQBooting failure (e.g. low battery)· Plug the USB cable and charge for 3min;· Check if the screen displays the normal charging status.System crash· Long press the Power Key for 11s to reboot.Read the installed Help App for more informationNFC reader

User GuideT8900、T8901Product technical specif icationsWIFICameraFLASHCPUCPU basic frequencyKeysDisplayOperating systemBluetoothRAMInterfacesTouch screenWireless dataItemBatterySAM card deckOutline dimensionsThree-prevention functionAdapterBuild-in WIFI 802.11 a/b/g/n/ac（2.4G/5G）500W AF16GB Nand FlashQuad-core MSM89171.4GHZ four coresPower key, function key, volume key, main screen key5 inch IPS, resolution 1280*720Android 7.1 Support of bluetooth 3.0/4.0BLE and iBeacon2GB LPDDR3Conﬁguration interfaces Type-c, SIM, PSAM, TF card slot, support of OTGCapacitive multi-touch screen, supportive of theglove modeTechnical Speciﬁcations3.8V/5000mAhSupport SAM card, meet ISO7816 standardsOUTPUT：DC5V/2A INPUT：AC100~240V/0.3A 50/60HzL152.8 mm * W76 mm * H18.9 mmNFC mifare/Felica/ISO 14443/ Type A/B/ISO15693；P2P mode and simulation through UICC and the host cardScanner(optional)Code 128,EAN-13,EAN-8,Code 39,UPC-A,UPC-E,ISSN,ISBN,Codabar,Code 93,F-6, ITF-14,Interleaved,Industrial,Standard 2 of 5,Matrix 22G：B2/B3/B5/B83G：(B1/B2/B4/B5);EVDO(BC0/BC1)4G：B2/B4/B7/B17/B28IP67 dust proof and waterproof functions List of packaged itemsTerminal device × 1User's Guide × 1Charger & Adapter × 1USB Cable × 1Sim Card Removal Pin × 1Name of partsCircuit board（Pb） (Hg) (Cd) (Cr(VII) (PBB) (PBDE)Toxic and harmful substances and elementsShell:It indicates that the content of toxic and harmful substances in all homogeneous materials of this part is below the limit speciﬁed in SJ/T11363-2006.:It indicates that the content of toxic and harmful substances is higher than the limit speciﬁed in SJ/T11363-2006 in at least one homogeneous material of this part; however, the the reason why the toxic substance of that part exceeds the limit is that there is no applicable material to replace it currently. For products that have reached or passed the service years for environmental protection, they should be recycled according to Measures for Control and Management of Electronic Information Products and should not be thrown away at will.Name and content of toxic and harmful substances contained in this product are shown in the following tableTechnical features and characteristicthe product includes the following features and characteristics：ManufactureRoom 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, ChinaThis product can be used across EU member states.The full text of the EU declaration DOC is available at the following internet address：www.sunmi.comGSM850GSM1900WCDMA bandIIWCDMA bandIVWCDMA bandVLTE band2LTE band4LTE band7LTE band17CDMA BC0CDMA BC1BTOperation Frequency824MHz-849MHz1850MHz-1910MHz1850MHz-1910MHz1710MHz-1755MHz824MHz-849MHz1850MHz-1910MHz1710MHz-1755MHz2500MHz-2570MHz704MHz-716MHz824MHz-849MHz1850MHz-1910MHz2402MHz-2480MHz2402MHz-2480MHz5250MHz-5350MHzTransmitted33dBm31dBm24dBm24dBm24dBm24dBm24.5dBm24.5dBm24dBm25dBm24.5dBm-1dBm6dBmBLE2412MHz-2462MHz5150MHz-5250MHz17dBm12dBmwiﬁ5725MHz-5850MHzThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference. (2) This device must accept any interference received, includinginterference that may cause undesired operation.FCC ID: 2AH25L2NOTE: Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:---Reorient or relocate the receiving antenna.---Increase the separation between the equipment and receiver.---Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.---Consult the dealer or an experienced radio/TV technician for help.Body-worn OperationThis device was tested for typical body-worn operations. To comply With RF exposure requirements, a minimum separation distance of 1.0cm must be maintained between the user’s body and the handset, including the antenna.Third-party belt-clips, holsters, and similar including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should beavoided.Speciﬁc Absorption Rate (SAR) information:This wireless phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientiﬁc organizations through periodic and thorough evaluation of scientiﬁc studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.FCC RF Exposure Information and Statement. The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue.Device types: T8900&T8901 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certiﬁcation when properly worn on the body is 1.856W/kg（10gSAR， test distance：10mm，limit 4W/kg）and 1.276W/kg (1gSAR， test distance：10mm，limit 1.6W/kg). This device was tested for body-worn operations with the back of the handset kept 10mm and 5mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm and 5mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Navigation menu