Sunmi Technology L2 Handheld Wireless Terminal User Manual L2 1011
Shanghai Sunmi Technology Co.,Ltd. Handheld Wireless Terminal L2 1011
L2 user manual 1011
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4033599 |
| Application ID | o1ETi5+G/EToj6hhqbC0gQ== |
| Document Description | L2 user manual 1011 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 77.86kB (973213 bits) |
| Date Submitted | 2018-10-12 00:00:00 |
| Date Available | 2018-10-12 00:00:00 |
| Creation Date | 2018-10-11 09:39:00 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2018-10-11 09:39:00 |
| Document Title | L2 英文ä¸æ€§ç”¨æˆ·æŒ‡å—(美版)_20181011-å®¡æ ¸ä¸ |
| Document Creator | Adobe Illustrator CC 2017 (Macintosh) |
Product Description Camera Flash light TF Function key Card cover Volume SIM PSAM SIM card, PSAM card and TF card installation instructions Power key Touch screen NFC reader Main screen key Volume up/down button Volume adjustment. Power key Short press: light the screen and lock the screen. Long press: under the power-off status, long press 2 to 3 seconds to power on; Under the operating status, long press 2 to 3seconds to choose power-off or restart. Under the crashed status, long press 11 seconds to automatically restart. Main screen key When the screen is locked, short press to lighten the screen; After unlocked, click at any interface to return to the main screen. Precautions Only a few steps to activate an intelligent business device ① Set 2G/3G/4G: when power off, insert the 2G(GSM) /3G(WCDMA)/4G(TD-LTE) card and then power on. (Refer to the Technical Specifications for the support of cards) ② Long press the Power Key for 2~3s to activate the backlight of screen, and then operate following the prompts after entering the startup/booting screen for the first time. 2 modes for accessing the Internet are available. ③ Set WiFi ·Click "Set" button, activate "WLAN" to enter the WLAN searching screen, and wait it to list all useable WLAN hot spots； ·Click the WLAN to be connected, and enter the access password in case of an encrypted network. Warnings Download/use Apps After connected to the Internet, open the App Market, find, download and install the Apps. Speaker Function key Capable of being configured as a code scanning key or other functions by software. Extremely easy settings 2-D Code Scanner (optional) Earphone socket Microphone Camera Supportive of photographing and 1D/2D fast scanning. Flash light Facilitating Illumination of the surrounding environment when taking photos. Card cover SIM card, PSAM card and TF card installation place. NFC reader For reading Quick Pass bank cards Earphone socket Capable of external access to a sound box, and access to a personal credit card POS (application program support is required) Two dimensional code scanner (optional) One dimensional bar code Infrared scanner, used for reading. Note: don't look straight at the Infrared scanning head to avoid eye injuries. SIM card slot Note: The machine must be in the power-off status during inserting or removing the SIM card. If plugging or removing is done in the power-on status, it may cause a machine stoppage. ·Use a card pin to open the card cover; ·Insert/remove the SIM card according to the illustrated directions; FAQ Booting failure (e.g. low battery) · Plug the USB cable and charge for 3min; · Check if the screen displays the normal charging status. System crash · Long press the Power Key for 11s to reboot. Read the installed Help App for more information PSAM card slot Used for inserting an encrypted PSAM CPU card. TF card slot Used for inserting TF card. · Plug the AC plug into an AC power outlet as specified on the Adapter; · Don't use in any space with explosive gas; · This product is verified as Level A, and may cause radio interference during normal use. · For avoiding unwanted radio interference, practical actions may be required. · Replace the battery: ① Replacing with an unmatched battery may result in dangerous explosion! ② Return the battery replaced to the serviceman. Don't dispose it in fire! Important Safety Instructions · Try not to install or use the device during lightning, or else there would be lightning stroke danger; · When you find unusual smell, overheat or smoke, please cut off the power immediately; Suggestions · Do not use it in extremely cold or hot conditions (e.g., near fire or a lighted cigarette); · Do not drop, throw or bend it; · Try to use it in a clean and dustless environment and avoid tiny articles falling into the terminal; · Do not use it near medical equipment without permission. Declaration The company shall not be responsible for the following actions · Any damage caused by not using and maintaining it under the conditions described in the guide; · Any damage or problem caused by optional parts or consumptive materials (not the original products provided by t he company or approved products), the company will assume no responsibility for this. It is not allowed to modify or change the product without the consent of the company. · The operating system of this product supports official system update. If users install ROM system from the third party or modify the system files by means of cracking, it may lead to system instability, as well as security risk and security threat. Disclaimer Owing to the update of the product, some details of this document may not be in conformity with those of the product. Please refer to the material object. The company reserves the right to interpret this document. The company reserves the right to modify this instruction book without prior notice. Product technical specifications Item Technical Specifications Operating system Android 7.1 CPU Quad-core MSM8917 CPU basic frequency 1.4GHZ four cores RAM 2GB LPDDR3 FLASH 16GB Nand Flash Display 5 inch IPS, resolution 1280*720 Touch screen Capacitive multi-touch screen, supportive of the glove mode Camera 500W AF NFC mifare/Felica/ISO 14443/ Type A/B/ISO15693； P2P mode and simulation through UICC and the host card Wireless data 2G：B2/B3/B5/B8 3G：(B1/B2/B4/B5);EVDO(BC0/BC1) 4G：B2/B4/B7/B17/B28 WIFI Build-in WIFI 802.11 a/b/g/n/ac（2.4G/5G） Bluetooth Support of bluetooth 3.0/4.0BLE and iBeacon Keys Power key, function key, volume key, main screen key Interfaces Configuration interfaces Type-c, SIM, PSAM, TF card slot, support of OTG SAM card deck Support SAM card, meet ISO7816 standards Outline dimensions L152.8 mm * W76 mm * H18.9 mm Battery 3.8V/5000mAh Adapter OUTPUT：DC5V/2A INPUT：AC100~240V/0.3A 50/60Hz Scanner (optional) Threeprevention function Code 128,EAN-13,EAN-8,Code 39,UPC-A, UPC-E,ISSN,ISBN,Codabar,Code 93,F-6, ITF-14, Interleaved,Industrial,Standard 2 of 5,Matrix 2 IP67 dust proof and waterproof functions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AH25L2 NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. Body-worn Operation This device was tested for typical body-worn operations. To comply With RF exposure requirements, a minimum separation distance of 1.0cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Specific Absorption Rate (SAR) information: This wireless phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement. The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue. Device types: T8900&T8901 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 1.856W/kg（10gSAR， test distance：10mm，limit 4W/kg） and 1.276W/kg (1gSAR， test distance：10mm，limit 1.6W/kg). This device was tested for body-worn operations with the back of the handset kept 10mm and 5mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm and 5mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Technical features and characteristic the product includes the following features and characteristics： Operation Frequency Transmitted GSM850 824MHz-849MHz 33dBm GSM1900 1850MHz-1910MHz 31dBm WCDMA bandII 1850MHz-1910MHz 24dBm WCDMA bandIV 1710MHz-1755MHz 24dBm WCDMA bandV 824MHz-849MHz 24dBm LTE band2 1850MHz-1910MHz 24dBm LTE band4 1710MHz-1755MHz 24.5dBm LTE band7 2500MHz-2570MHz 24.5dBm LTE band17 704MHz-716MHz 24dBm CDMA BC0 824MHz-849MHz 25dBm CDMA BC1 1850MHz-1910MHz 24.5dBm BT 2402MHz-2480MHz 6dBm BLE 2402MHz-2480MHz -1dBm 2412MHz-2462MHz 17dBm wifi 5150MHz-5250MHz 5250MHz-5350MHz 5725MHz-5850MHz 12dBm Name and content of toxic and harmful substances contained in this product are shown in the following table Name of parts Toxic and harmful substances and elements （Pb） (Hg) (Cd) (Cr(VII) (PBB) (PBDE) Circuit board Shell :It indicates that the content of toxic and harmful substances in all homogeneous materials of this part is below the limit specified in SJ/T11363-2006. :It indicates that the content of toxic and harmful substances is higher than the limit specified in SJ/T11363-2006 in at least one homogeneous material of this part; however, the the reason why the toxic substance of that part exceeds the limit is that there is no applicable material to replace it currently. For products that have reached or passed the service years for environmental protection, they should be recycled according to Measures for Control and Management of Electronic Information Products and should not be thrown away at will. This product can be used across EU member states. The full text of the EU declaration DOC is available at the following internet address：www.sunmi.com Manufacture Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China List of packaged items Terminal device × 1 User's Guide × 1 Charger & Adapter × 1 USB Cable × 1 Sim Card Removal Pin × 1 T8900、T8901 User Guide
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Creator Tool : Adobe Illustrator CC 2017 (Macintosh) Create Date : 2018:10:11 09:39+08:00 Modify Date : 2018:10:11 09:39+08:00 Metadata Date : 2018:10:11 09:39+08:00 Thumbnail Width : 248 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 24855 bytes, use -b option to extract) N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 374.999986 Max Page Size H : 155.000008 Max Page Size Unit : Millimeters Font Name : AdobeSongStd-Light, PingFang-SC-Medium, PingFang-SC-Regular, ArialMT Font Family : Adobe 宋体 Std, 苹方, 苹方, Arial Font Face : L, 中等, 常规, Regular Font Type : Open Type, TrueType, TrueType, Open Type Font Version : Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, 10.11d9e1, 10.11d9e1, Version 7.00 Font Composite : False, False, False, False Font File Name : AdobeSongStd-Light.otf, PingFang Medium.ttf, PingFang Regular.ttf, arial.ttf Plate Names : Cyan, Magenta, Black, PANTONE 165 C Swatch Group Name : 默认色板组 Swatch Group Type : 0 Swatch Colorant Swatch Name : AutoCAD Color, PANTONE 165 C, PANTONE Black 6 C, AutoCAD Color 8, AutoCAD Color 5, AutoCAD Color 2, AutoCAD Color 3, AutoCAD Color 4 Swatch Colorant Type : PROCESS, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant Mode : CMYK, Lab, Lab, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Cyan : 92.941201, 54.924798, 92.971700, 2.841200, 54.924798, 61.327499 Swatch Colorant Magenta : 87.923998, 0.000000, 87.972802, 32.376599, 0.000000, 0.000000 Swatch Colorant Yellow : 89.019603, 17.715700, 89.019603, 89.864999, 17.715700, 100.000000 Swatch Colorant Black : 79.998499, 0.000000, 79.998499, 0.000000, 0.000000, 0.000000 Swatch Colorant L : 64.705902, 7.843140 Swatch Colorant A : 59, -2 Swatch Colorant B : 68, -7 Format : application/pdf Title : L2 英文中性用户指南(美版)_20181011-审核中 Rendition Class : proof:pdf Document ID : xmp.did:120da4ac-dd1a-4955-94c1-2639494eeba6 Instance ID : uuid:92fa6267-e903-0149-9ec5-f17538b458a7 Original Document ID : uuid:dfebd2e3-de19-48fc-9fc3-26c53bbd00c2 Derived From Instance ID : xmp.iid:54bb16ab-60a0-4573-aba4-fc2e0ff48281 Derived From Document ID : xmp.did:54bb16ab-60a0-4573-aba4-fc2e0ff48281 Derived From Original Document ID: uuid:dfebd2e3-de19-48fc-9fc3-26c53bbd00c2 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:ef391e11-f7f2-4a40-964f-6dec6791ec20, xmp.iid:120da4ac-dd1a-4955-94c1-2639494eeba6 History When : 2017:09:20 16:56:11+08:00, 2018:10:11 09:38:58+08:00 History Software Agent : Adobe Illustrator CC 2017 (Macintosh), Adobe Illustrator CC 2017 (Macintosh) History Changed : /, / Producer : Adobe PDF library 15.00 Page Count : 2 Creator : Adobe Illustrator(R) 17.0 AI Creator Version : 21.0.0 For : տ˱, Bounding Box : -502 1862 566 2962 AI Build Number : 223 AI Color Usage : Color AI Ruler Units : Millimeters AI Color Model : CMYK AI Target Resolution : 800 AI Num Layers : 3 Container Version : 11 Creator Version : 21EXIF Metadata provided by EXIF.tools