Sunricher Technology RF2818 RF sender User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2963542
Application ID	BKqDFXQUMxMSxIQvqDQPpw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	101.03kB (1262847 bits)
Date Submitted	2016-04-19 00:00:00
Date Available	2016-04-19 00:00:00
Creation Date	2016-03-18 10:59:53
Producing Software	Corel PDF Engine Version 14.0.0.653
Document Lastmod	2016-03-30 11:48:34
Document Title	User Manual
Document Creator	CorelDRAW
Document Author:	Administrator

RF wireless LED remote controller
Brief introduction of buttons
Model:SR-2818 with SR-1009Fxx
Bottom
Indicator
Color wheel
ON/OFF button
Play & Pause button
USB port
Save color button
Return previous status button
Eight zones/areas
Touch button RGB+W controller
Chargeable by USB
Receivers work with WIFI-RF converter to be controlled by smart phone
ON
R/G/B/W button
Brightness button
Speed down & speed up button
Zone button
OFF
Indicator will be on while remote is charging.
Indicator will be off while it’s full power.
Wiring diagram
1)Receiver Connection Diagram for Single Unit
Power Supply
12-36VDC
110V-230VAC
Product introduction
LED CONTROLLER
white
for each zone. You can choose any color through color wheel. There is a USB port to charge internal battery.
Parameter
SR-1009FA
Learning Key
White color directly. The remote controller can save up to 8 colors or 8 modes into corresponding buttons (1-8 buttons)
SR-2818 RGBW remote controller is full touch remote controller which has 8 different zones. It can get Red/ Green/ Blue/
2)Receiver Connection Diagram for Multiple Units
Remote
SR-2818
3.7VDC
Operation
Frequency
916.67MHz
DIMENSIONS
ø/h (mm)
Remarks
59x115x12
Lithium battery,
USB charging capability
Power Supply
12-36VDC
110V-230VAC
Operation Voltage
Part No.
Constant voltage
SR-1009EA
12-36VDC
4x8A
4x(96-288)W
Constant voltage
SR-1009FA3
12-36VDC
4x350mA
4x(4.2-12.6)W
Constant current
SR-1009FA7
12-36VDC
4x700mA
4x(8.4-25.2)W
Constant current
SR-1009FA
Learning Key
Remarks
4x(60-180)W
LED CONTROLLER
Output Power
4x5A
Output Current
12-36VDC
white
Input Voltage
Part No.
SR-1009FA
Receiver
SR-1009FA
white
58.8
LED CONTROLLER
Product Size
white
Learning Key
12.0
115.4
SR-1009FA
LED CONTROLLER
Learning Key
Note:
One receiver can work with 1-8pcs SR-2818
One SR-2818 control multiple receivers
The power supply chosen must be 20% higher than the
actual load
b. How to save mode into different position per zone?
Operation
Learning (matching)
a. Do wiring according to connection diagram
b. Wake up the remote control by touching ON/OFF button.
c. Press learning button on receiver.
d. Touch any zone button on remote control.
e. Then touch color wheel.
f. Connected LED light will blink to confirm zone designation.
g. Press at learning button on receiver over 5 seconds until LED light flash, then delete the learned ID.
Note 1: To choose a master from slaves by jumper for each zone.
Short circuit for master.
Open circuit for slave.
Each zone only can set one master controller. After a period of time, the master will do synchronization
operation to keep the same color or mode of all slaves in one zone.
Note 2: Each remote control 8 zones (areas) receivers, each area can be learned as many receivers as
we can.
Each receiver maximally can be controlled by 8 different remote controllers.
ZONE
Press button
for select an ideal mode
Press any zone
button you want
ZONE
Choose 1
4 position( any button ) to save mode
c. Recall
Choose zone number form
mode saved into.
, then press
Press
button(the blue
indicator will be on) for saving
button, and press the position button which color or
Note:if the remote control is not used for a long time, need to charge it every two months.
Safety & Warnings
RGBW Button
Touch
button is to switch on/off of each corresponding color.
Hold your finger on
button to dim brightness of each corresponding color. There are total 8 levels
of brightness.
Note: If you press R, then press G, then it is mix color of R and G. If you want to get G color directly, please
press R to switch off of R first. Then press G.
Running&Pause Button
a.Press pause&run button
,mode will run. Press it once , it runs one mode. Press button again, it stops,
then press one more time, it will enter next mode. There are total 10 build-in modes.
b.Pause&run button can work with button
, it can save modes into different zone.
c.Touch button 1 2 3 4 one by one, such as press button 1,2,3,4,5,6, then
Return button
Touch
button to return previous color or running mode.
ZONE
Touch color wheel
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6) Please ensure that the cable is secured tightly in the connector
for select an ideal color
5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
or
Press any zone
button you want
7) For update information please consult your supplier.
8)The warranty of battery is 1 year.
Any defects caused by wrong operation.
Save Button
a. How to save color into different position per zone?
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
1) We provide lifelong technical assistance with this product:
to speed up when mode is running.
Brightness down or up button
Long touch button
to dim down brightness of RGB channels, Long touch
button to dim up RGB
channels.
“W” channel is separated from RGB channels, so we can only long touch button to dimming“W” channel.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
Warranty Agreement
Speed up and Speed down Button
Touch button
to speed down when mode is running, touch button
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
Press
button.1,2,3,4,5,6 will run synchronized mode, after long press, LED lighting will flash twice, they will
switch to chasing running mode, long press again to switch back.
1) The product shall be installed and serviced by a qualified person.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Select R/G/B/W color by press
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
POSITION
Choose 1
4 position( any button ) to save color
Long press
button(the blue
indicator will be on) for saving
For example, press zone button 1, then touch color wheel for orange color, then press S button (the blue
indicator will be on),then choose position button 3. That’s to say, we save orange color from zone 1 into position 3.
So each zone can save 8 colors. 8 zones can save 64 colors.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2016:03:30 11:48:34+08:00
Create Date                     : 2016:03:18 10:59:53+08:00
Metadata Date                   : 2016:03:30 11:48:34+08:00
Creator Tool                    : CorelDRAW
Format                          : application/pdf
Title                           : 2818说明书
Creator                         : Administrator
Document ID                     : uuid:28083b29-11d8-44a7-b284-288e91858204
Instance ID                     : uuid:f715810c-42fd-4d91-b9fd-c431d1f11b62
Producer                        : Corel PDF Engine Version 14.0.0.653
Page Count                      : 3
Author                          : Administrator

EXIF Metadata provided by EXIF.tools