Sweepscrub Kaercher Km 120 150 R Bp Rider Sweeper Quick Start Guide OBJ_DOKU 109522 001 User Manual

2017-11-01

User Manual: Sweepscrub Kaercher-Km-120-150-R-Bp-Rider-Sweeper-Quick-Start-Guide kaercher-km-120-150-r-bp-rider-sweeper-quick-start-guide 2390 file product_file sweepscrub

Open the PDF directly: View PDF PDF.
Page Count: 5

DownloadSweepscrub Kaercher-Km-120-150-R-Bp-Rider-Sweeper-Quick-Start-Guide OBJ_DOKU-109522-001 User Manual
Open PDF In BrowserView PDF
QUICKSTART

KM 120/150 R Bp/Bp Pack
Warning
These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.

Start up

1

2

A

B

C

Bp model
A Open the device hood.
B Switch off the charger and remove the plug
from the socket.
Pull the battery cable from the charger cable
and connect it to the appliance.
C Close cover.

A

B

C

A

B

C

Bp Pack model
A Open the device hood.
B Unplug the charger from the mains.
Place the mains cable into the storage compartment.
C Close cover.

A Pull seat adjustment lever outwards.
B Move seat, release lever and
lock in place.
Check that the seat is properly locked in
position by attempting to move it backwards
and forwards.
C Adjust the seat back.
D Position the steering wheel.

D

5.964-011.0 07/11

QUICKSTART
Operation

1

A

B

C

Starting the machine
A Sit on the driver's seat.
B Do NOT press the accelerator pedal.
C Set programme switch to stage
1 (driving).
D Turn key switch to position "I".

D

2

A

3

A

B

C

Drive the machine
A Press slowly the accelerator pedal "forward".
B Press slowly the accelerator pedal "reverse".
C Release the accelerator pedal, the machine
brakes automatically and stops.

B

Sweeping with sweep roller
A Set programme switch to stage 2.
Roller brush is lowered.
Increase roller brush pressure
B Press power button. Indicator lamp
is illuminated.

4

A

5

A

Sweeping with side brushes
A Set programme switch to stage 3.
The side brushes and roller brush are
lowered.

Sweeping with raised
coarse waste flap
A Push the coarse waste flap pedal
towards the front and hold it there briefly.
To lower it, take foot off pedal.

5.964-011.0 07/11

QUICKSTART
Operation

6

A

7

A

8

A

Sweeping damp or wet floors
A Fan "Off".

B

C

Cleaning the dust filter
A Fan "Off".
B Depending on the amount of the collected
dust, the dust filter must be cleaned during
operation.
C Fan "On".

Operation with working lights
A Switch on the working light.

9

A

B

Emptying waste container
 Danger
Risk of injury! When emptying the waste
container, care should be taken to ensure that no
persons or animals are within its swivelling range.


Danger

Danger of crushing. Never reach into the rod
assembly for the drainage mechanism. Stay
away from the area under the raised container.
C

D

E



Danger

Danger of tipping! Place the appliance on an
even surface during the emptying
process.
A Keep the switch for the two-handed operations lift/tilt emptying mechanism pressed.
B Raise waste container.
C Tip waste container out.
D Tilt the waste container up to the end-position.
E Lower waste container.

5.964-011.0 07/11

QUICKSTART
Finish operation

1

See "Operation"

A

Turn off the appliance

B

A Set programme switch to stage
1 (driving). The side brushes and roller brush
are raised.
B Turn ignition key to "0" and remove it.

1

A

2

A

weekly

daily

Maintenance and care

Kärcher Customer Service

2

Emptying waste container

A Check the sweeping roller and the
side brush for wear and wrapped
belts.

B

A Check dust filter and clean filter
box, if required.
B Clean the machine with a damp
cloth which has been soaked in
mild detergent.
몇

Warning

Risk of damage! Do not wash down the
appliance with water and do not use
aggressive detergents.

5.964-011.0 07/11

QUICKSTART
Troubleshooting

1

A

B

C

D

Appliance cannot be started
A Sit on the driver seat, the
seat contact switch gets activated
B Turn key switch to position "I".
C Bp model
Remove battery plug and join it to the
charging cable.
Switching on the charger
D Bp Pack model
Remove the mains cable from the storage
bin.
Connect the charger to the mains and turn it
on.

2

A

3

A

B

C

Machine is not sweeping properly
A Check roller brush and side brushes for wear,
replace if necessary.
B Adjust sweeping track
C Check function of bulk waste flap

4

A

B

C

Dust gathers in the machine
A Empty waste container
See "Operation"
B Check, clean or
replace dust filter
C Close wet/dry flap
Roller brush does not turn.
A Remove tapes or cords from the
roller brush

Engine is running but machine is not moving
A Check setting of freewheel lever

5.964-011.0 07/11



Navigation menu