Symbol Technologies MC18N0 MC18 Personal Shopper - Barcode Scanner User Manual MN000835A03a
Symbol Technologies Inc MC18 Personal Shopper - Barcode Scanner MN000835A03a
Contents
User manual (statements)
We reserves the right to make changes to any product to
improve reliability, function, or design. We do not assume any
product liability arising out of, or in connection with, the
application or use of any product, circuit, or application
described herein. No license is granted, either expressly or
by implication, estoppel, or otherwise under any patent right
or patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which
our products might be used. An implied license exists only for
equipment, circuits, and subsystems contained in our
products.
Warranty
For the complete hardware product warranty statement, go
to: http://www.zebra.com/warranty.
Service Information
If you have a problem using the equipment, contact your
facility’s Technical or Systems Support. If there is a problem
with the equipment, they will contact the Global Customer
Support at: http://www.zebra.com/support.
For detailed documentation and the latest version of this
guide go to: http://www.zebra.com/support
MC18
QUICK
REFERENCE
GUIDE
Zebra and the stylized Zebra head are trademarks of ZIH Corp.,
registered in many jurisdictions worldwide. All other trademarks are
the property of their respective owners. The Symbol logo is a
registered trademark of Symbol Technologies, Inc., a Zebra
Technologies company.
© 2015 ZIH Corp and/or its affiliates. All rights reserved.
MN000835A03 Revision A - April 2015
Introduction
This Quick Reference Guide describes the main
features of the MC18, scanning bar codes, installing
and removing a battery and manual release of a locked
MC18 from a cradle.
This guide also provides regulatory information.
Unpacking
Carefully remove all items from the shipping box and
save the shipping box for later storage and shipping.
Verify that you received all the items listed below:
•
MC18
•
Lithium-ion battery
•
This Quick Reference Guide.
Features
Scanning Bar Codes
To scan:
1. Launch a scanning application.
2. Press the scan key and aim the MC18 at a bar
code.
3. Adjust the position of the MC18 so that the red
aiming dot appears at the center of the bar code.
Upon successful decode, the LED blinks green and the
unit may also beep.
Installing the Battery
To install the battery:
1. Using Torx T8 drive, remove two screws that secure
the battery cover.
2. Lift the battery cover from the handle.
3. Guide and press the battery cable connector into
the female connector inside the battery
compartment. The connector is designed to only fit
one way.
LED
Red: bar code scan in
progress (Scan key is
pressed).
Single green blink:
Successful decode.
Display
Scan key
Speaker
Battery Cover
Power Connector
Scan Window
Red Aiming Dot
Wrong
Right
4. Place the battery inside the battery compartment.
5. Place the battery cover onto the handle.
Secure the battery cover with the two Torx screws
using a T8 Torx drive. Torque the screws to 3.6 Kgf-cm
(3.1 in-lb).
Removing the Battery
To remove the battery:
1. Use T8 Torx drive to remove the two screws that
secure the battery cover.
2. Lift the battery cover from the handle.
3. Inside the battery compartment, press down the
plastic tab of the Battery cable connector and slide
it out of the female connector.
4. Remove the battery from the battery compartment.
Charging the Battery
To charge the battery, Insert the MC18 into the cradle.
With a fully depleted battery, the MC18 fully charges in
approximately four hours. Refer to the MC18 Product
Reference Guide for specific charging profile
information.
Battery Cover
Battery
Battery Cable
Connector
Battery
Compartment
Battery Cable Connector
Press down plastic tab to release
Single Slot Cradle
Three Slot Cradle
Manual Release of MC18 from
Charging Cradles
Some cradle models contain a locking mechanism that
locks the MC18 into the cradle. The MC18 releases
from the cradle via a software command to the cradle.
If the MC18 does not unlock from the cradle, unlock it
manually as described below.
.
Three Slot Cradle - Release Key
1. Insert the release key straight into the socket.
2. While pressing the release key all the way to the end
of the socket, remove the MC18 from the socket.
Single Slot Cradle - Release Key
1. Insert the release key into the slot located at the
bottom side of the cradle.
2. While pressing the release key all the way into the
slot, remove the MC18 from the cradle.
Regulatory Information
This guide applies to the following Model Number:
MC18N0.
All Symbol devices are designed to be compliant with
rules and regulations in locations they are sold and will
be labeled as required.
Local language translations are available at the
following website: www.zebra.com/support
Any changes or modifications to Symbol equipment, not
expressly approved by Symbol, could void the user's
authority to operate the equipment.
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more
information or to view End Product Listing, please visit
https://www.bluetooth.org/tpg/listings.cfm
Wireless Device Country Approvals
Regulatory markings, subject to certification, are
applied to the device signifying the radio(s) is approved
for use in the following countries: United States,
Canada, Australia and Europe1.
Please refer to the Declaration of Conformity (DoC) for
details of other country markings. This is available at:
http://www.zebra.com/doc
1Note: For 2.4GHz or 5GHz Products: Europe includes,
Austria, Belgium, Bulgaria, Croatia, Czech Republic,
Cyprus, Denmark, Estonia, Finland, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania,
Slovak Republic, Slovenia, Spain, Sweden, Switzerland
and the United Kingdom.
Operation of the device without regulatory
approval is illegal.
Ad-Hoc Operation (2.4 GHz band)
Ad-Hoc operation is limited to Channels 1-11 (2412-
2462 MHz).
CAUTION Do not use any device to unlock the cradle
other than the tools described below. Failure to
comply could result in damage to the cradle and void
the warranty.
CAUTION Only use Symbol approved and UL Listed
accessories, battery packs and battery chargers. Do
NOT attempt to charge damp/wet devices or
batteries. All components must be dry before
connecting to an external power source.
Declared maximum operating temperature: 104°F
(40°C).
Release Key
Release Key
Frequency of Operation - IC
Industry Canada Statement:
Caution: The device for the band 5150-5250 MHz is
only for indoor usage to reduce potential for harmful
interference to co-Channel mobile satellite systems.
High power radars are allocated as primary users
(meaning they have priority) of 5250-5350 MHz and
5650-5850 MHz and these radars could cause
interference and/or damage to LE-LAN devices.
Avertissement: Le dispositive fonctionnant dans la bande
5150-5250 MHz est réservé uniquement pour une
utilisation à l'intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles
utilisant les mêmes canaux.
Les utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu'ils ont la
priorité) pour les bands 5250-5350 MHz et 5650-5850
MHz et que ces radars pourraient causer du brouillage
et/ou des dommages aux dispositifs LAN-EL.
Health and Safety Recommendations
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential
risk of ergonomic injury follow the recommendations
below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your
company's safety programs to prevent employee injury.
•
Reduce or eliminate repetitive motion
•
Maintain a natural position
•
Reduce or eliminate excessive force
•
Keep objects that are used frequently within easy
reach
•
Perform tasks at correct heights
•
Reduce or eliminate vibration
•
Reduce or eliminate direct pressure
•
Provide adjustable workstations
•
Provide adequate clearance
•
Provide a suitable working environment
•
Improve work procedures
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the
usage of wireless devices.
Pacemakers
Pacemaker manufacturers recommended that a
minimum of 15cm (6 inches) be maintained between a
handheld wireless device and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with independent
research and recommendations by Wireless
Technology Research.
Persons with Pacemakers:
•
Should ALWAYS keep the device more than 15cm
(6 inches) from their pacemaker when turned ON.
•
Should not carry the device in a breast pocket.
•
Should use the ear furthest from the pacemaker to
minimise the potential for interference.
•
If you have any reason to suspect that interference
is taking place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of
the medical device, to determine if the operation of
your wireless product may interfere with the medical
device.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the
instructions supplied.
International
The device complies with internationally recognized
standards covering human exposure to
electromagnetic fields from radio devices. For
information on “International” human exposure to
electromagnetic fields refer to the Symbol Declaration
of Conformity (DoC) at:
http://www.zebra.com/doc
For further information on the safety of RF energy from
wireless devices - see https://www.zebra.com/us/en/
about-zebra/company-information/corporate-
responsibility.html
Located under Wireless Communications and Health.
Europe
Handheld Devices - This device was tested for hand-
held and body-worn conditions.
To satisfy EU RF exposure requirements, the
transmitting device must operate with a minimum
separation distance of 1 cm or more from a person’s
body
US and Canada
Co-located Statement
To comply with FCC RF exposure compliance
requirement, the antenna used for this transmitter must
not be co-located or operating in conjunction with any
other transmitter/antenna except those already
approved in this filling.
Handheld Devices
This device was tested for hand-held and body-worn
conditions.
To satisfy US and Canadian RF exposure
requirements, the transmitting device must operate
with a minimum separation distance of 1 cm or more
from a person’s body.
Pour satisfaire aux exigences Américaines et
Canadiennes d'exposition aux radiofréquences, un
dispositif de transmission doit fonctionner avec une
distance de séparation minimale de 1 cm ou plus de
corps d'une personne.
LED Devices
LED Compliance Statement:
Classified as "EXEMPT RISK GROUP" according to
IEC 62471:2006 and EN 62471:2008.
Power Supply
For charge cradle, use ONLY an approved UL LISTED
ITE (IEC/EN 60950-1, LPS/SELV) power supply with
electrical ratings: Output 12Vdc, min 9A, with a
maximum ambient temperature of at least 50°C.
Use of alternative power supply will invalidate any
approvals given to this unit and may be dangerous.
Batteries
Battery Information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of
batteries according to instructions.
Use only Symbol approved batteries. Accessories
which have battery charging capability are approved
for use with the following battery models:
Symbol BT000018A01 (3.7 Vdc, 2725 mAh typical)
Symbol rechargeable battery packs are designed and
constructed to the highest standards within the
industry. However, there are limitations to how long a
battery can operate or be stored before needing
replacement. Many factors affect the actual life cycle of
a battery pack, such as heat, cold, harsh
environmental conditions and severe drops.
When batteries are stored over six (6) months, some
irreversible deterioration in overall battery quality may
occur. Store batteries at half of full charge in a dry, cool
place, removed from the equipment to prevent loss of
capacity, rusting of metallic parts and electrolyte
leakage. When storing batteries for one year or longer,
the charge level should be verified at least once a year
and charged to half of full charge.
Replace the battery when a significant loss of run time
is detected.
Standard warranty period for all Symbol batteries is
one year, regardless if the battery was purchased
separately or included as part of the mobile computer
or bar code scanner. For more information on Symbol
batteries, please visit: http://www.zebra.com/
batterybasics.
Battery Safety Guidelines
•
The area in which the units are charged should be
clear of debris and combustible materials or
chemicals. Particular care should be taken where
the device is charged in a non commercial
environment.
•
Follow battery usage, storage, and charging
guidelines found in the user's guide.
•
Improper battery use may result in a fire, explosion,
or other hazard.
•
To charge the mobile device battery, the battery and
charger temperatures must be between +32°F and
+104°F (0°C and +40°C)
•
Do not use incompatible batteries and chargers.
Use of an incompatible battery or charger may
present a risk of fire, explosion, leakage, or other
hazard. If you have any questions about the
compatibility of a battery or a charger, contact
Symbol Global Customer support.
•
Do not disassemble or open, crush, bend or
deform, puncture, or shred.
•
Severe impact from dropping any battery-operated
device on a hard surface could cause the battery to
overheat.
•
Do not short circuit a battery or allow metallic or
conductive objects to contact the battery terminals.
•
Do not modify or remanufacture, attempt to insert
foreign objects into the battery, immerse or expose
to water or other liquids, or expose to fire,
explosion, or other hazard.
•
Do not leave or store the equipment in or near
areas that might get very hot, such as in a parked
Review Copy
vehicle or near a radiator or other heat source. Do
not place battery into a microwave oven or dryer.
•
Battery usage by children should be supervised.
•
Please follow local regulations to promptly dispose
of used re-chargeable batteries.
•
Do not dispose of batteries in fire.
•
Seek medical advice immediately if a battery has
been swallowed.
•
In the event of a battery leak, do not allow the liquid
to come in contact with the skin or eyes. If contact
has been made, wash the affected area with large
amounts of water and seek medical advice.
•
If you suspect damage to your equipment or
battery, contact Symbol Global Customer support to
arrange for inspection.
Use with Hearing Aids
When some wireless devices are used near some
hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining
noise. Some hearing devices are more immune than
others to this interference noise, and wireless devices
also vary in the amount of interference they generate.
In the event of interference you may want to consult
your hearing aid supplier to discuss solutions.
This device is not HAC compliant.
Radio Frequency Interference
Requirements- FCC
Note: This equipment has been
tested and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment
and receiver
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected
•
Consult the dealer or an experienced radio/TV
technician for help
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Radio Frequency Interference
Requirements - Canada
Radio Transmitters
CAN ICES-3 (B)/NMB-3(B)
The use of 5 GHz RLAN's, for use in Canada, have
the following restrictions:
•
Restricted Band 5.60 - 5.65 GHz
This device complies with Industry Canada licence -
exempt RSS standard(s). Operation is subject to the
following two conditions: (1) the device must not
produce interference, and (2) the device must accept
any interference to the radio, even if the interference is
likely to compromise operation.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux
conditions suivantes: (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le
fonctionnement.
Label Marking: The Term "IC:" before the radio
certification only signifies that Industry Canada
technical specifications were met.
Marking and European Economic Area
(EEA)
The use of 2.4GHz RLAN's, for use through the EEA,
have the following restrictions:
•
Maximum radiated transmit power of 100 mW EIRP
in the frequency range 2.400 -2.4835 GHz.
Bluetooth® Wireless Technology for use through the
EEA has the following restrictions:
•
Maximum radiated transmit power of 100mW EIRP
in the frequency range 2.400 -2.4835 GHz.
Statement of Compliance
Symbol hereby declares that this device is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC and 2011/
65/EU. A Declaration of Conformity may be obtained
from http://www.zebra.com/doc
Other Countries
Australia
Use of 5 GHz RLAN's in Australia is restricted in the
following band 5.60 - 5.65GHz.
Brazil
(UNWANTED EMISSIONS - ALL
PRODUCTS)
Regulatory declarations for
MC18N0 - BRAZIL
For more information consult the website
www.anatel.gov.br.
Declarações Regulamentares para MC18N0 - Brazil
Nota: “A marca de certificação se aplica ao Transceptor,
modelo MC18N0. Este equipamento opera em caráter
secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo
tipo, e não pode causar interferência a sistemas operando
em caráter primário.”
Para maiores informações sobre ANATEL consulte o site:
www.anatel.gov.br.
Este equipamento opera em caráter secundário, isto é,
não tem direito a proteção contra interferência prejudicial,
mesmo de estações do mesmo tipo, e não pode causar
interferência a sistemas operando em caráter primário.
Este produto está homologado pela Anatel, de acordo com
os procedimentos regulamentados pela Resolução n°242/
2000 e atende aos requisitos técnicos aplicados, incluindo
os limites de exposição da Taxa de Absorção Específica
referente a campos elétricos, magnéticos e
eletromagnéticos de radiofrequência, de acordo com as
Resoluções n° 303/2002 e 533/2009.
Este dispositivo está em conformidade com as diretrizes
de exposição à radiofrequência quando posicionado pelo
menos 1 centímetros de distância do corpo. Para maiores
informações, consulte o site da Anatel.
Chile
Este equipo cumple con la Resolución No 403 de 2008, de
la Subsecretaria de telecomunicaciones, relativa a
radiaciones electromagnéticas.
Hong Kong
In accordance with HKTA1039, the band 5.15GHz - 5.35GHz is
for indoor operation only.
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
La operación de este equipo está sujeta a las siguientes
dos condiciones: (1) es posible que este equipo o
dispositivo no cause interferencia perjudicial y (2) este
equipo o dispositivo debe aceptar cualquier interferencia,
incluyendo la que pueda causar su operación no deseada.
Thailand
เครื่ องโทรคมนาคมและอุปกรณ นี้
มี ความสอดคลองตามขอกําหนดของ กทช .
Open Source Software Information
For instructions on how to obtain a copy of any source
code being made Open Source by Symbol related to
software used in this Symbol Product you may send
your request in writing to:
Symbol Technologies, Inc. Open Source Software
Management 1301 E. Algonquin Road Schaumburg, IL
60196, U.S.A.
In your request, please include the Symbol Product
Name and Version, along with the Open Source
Software specifics, such as the Open Source Software
Name and Version.
Note, the source code for the Open Source Software
may be resident on the Symbol Product Installation
Media, or on supplemental Symbol Product Media.
Please reference and review the entire Symbol Open
Source Software Legal Notices and End User License
Agreement for the details on location and methods of
obtaining the source code. Note, dependent on the
license terms of the Open Source Software, source
code may not be provided. Please reference and
review the entire Symbol Open Source Software Legal
Notices and End User License Agreement for
identifying which Open Source Software Packages will
have source code provided. To view additional
information regarding licenses, acknowledgements
and required copyright notices for open source
packages used in this Symbol product, touch Settings
> About phone > Legal information > Open source
licenses.
English: For EU Customers: All products at the end
of their life must be returned to Symbol for
Waste Electrical and Electronic
Equipment (WEEE)
recycling. For information on how to return product,
please go to: http://www.zebra.com/weee.
Français: Clients de l'Union Européenne: Tous les
produits en fin de cycle de vie doivent être
retournés à Symbol pour recyclage. Pour de plus
amples informations sur le retour de produits,
consultez: http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos
los productos deberán entregarse a Symbol al final
de su ciclo de vida para que sean reciclados. Si
desea más información sobre cómo devolver un
producto, visite: http://www.zebra.com/weee.
Български: За клиенти от ЕС: След края на
полезния им живот всички продукти трябва да
се връщат на Symbol за рециклиране. За
информация относно връщането на продукти,
моля отидете на адрес: http://www.zebra.com/
weee.
Deutsch: Für Kunden innerhalb der EU: Alle
Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Symbol zurückgesandt werden.
Informationen zur Rücksendung von Produkten
finden Sie unter http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono
giunti al termine del rispettivo ciclo di vita devono
essere restituiti a Symbol al fine di consentirne il
riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web: http://
www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos
no fim de vida devem ser devolvidos à Symbol para
reciclagem. Para obter informações sobre como
devolver o produto, visite: http://www.zebra.com/
weee.
Nederlands: Voor klanten in de EU: alle producten
dienen aan het einde van hun levensduur naar
Symbol te worden teruggezonden voor recycling.
Raadpleeg http://www.zebra.com/weee voor meer
informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty
wycofane z eksploatacji nale¿y zwróciæ do firmy
Symbol w celu ich utylizacji. Informacje na temat
zwrotu produktów znajduj¹ siê na stronie
internetowej http://www.zebra.com/weee.
Čeština: Pro zákazníky zEU: Všechny produkty je
nutné po skonèení jejich životnosti vrátit
spoleènosti Symbol krecyklaci. Informace o
zpùsobu vrácení produktu najdete na webové
stránce: http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea
lõppedes tagastada taaskasutamise eesmärgil
Symbol'ile. Lisainformatsiooni saamiseks toote
tagastamise kohta külastage palun aadressi: http://
www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden
tönkrement terméket a Symbol vállalathoz kell
eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a http://
www.zebra.com/weee weboldalra.
Slovenski: Za kupce v EU: vsi izdelki se morajo po
poteku življenjske dobe vrniti podjetju Symbol za
reciklažo. Za informacije o vraèilu izdelka obišèite:
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som
uppnått sin livslängd måste returneras till Symbol
för återvinning. Information om hur du returnerar
produkten finns på http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki
tuotteet on palautettava kierrätettäväksi Symbol-
yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja
tuotteen palauttamisesta on osoitteessa http://
www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal
returneres til Symbol til recirkulering, når de er
udtjent. Læs oplysningerne om returnering af
produkter på: http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα,
στο τέλος της διάρκειας ζωής τους, πρέπει να
επιστρέφονται στην Symbol για ανακύκλωση. Για
περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη
διεύθυνση http://www.zebra.com/weee στο
Διαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu
waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu
rritornati għand Symbol għar-riċiklaġġ. Għal aktar
tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po
poteku življenjske dobe vrniti podjetju Symbol za
reciklažo. Za informacije o vračilu izdelka obiščite:
http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky
výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Symbol na recykláciu. Bližšie
informácie o vrátení výrobkov nájdete na: http://
www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus
jų eksploatacijos laikui, turi būti grąžinti utilizuoti į
kompaniją „Symbol“. Daugiau informacijos, kaip
grąžinti gaminį, rasite: http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to
kalpošanas mūža beigām ir jānogādā atpakaļ
Symbol otrreizējai pārstrādei. Lai iegūtu informāciju
par produktu nogādāšanu Symbol, lūdzu, skatiet:
http://www.zebra.com/weee.
Turkish WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur.
Software Support
Symbol wants to ensure that customers have the latest
release of entitled software at the time of product
purchase.
To confirm that your Symbol device shipped with the
latest release of entitled software, visit:
www.zebra.com/support. Check for the latest software
from Software Downloads > Product Line/Product >
Go.
If your device does not have the latest entitled software
release as of your product purchase date, please e-
mail a request to:
entitlementservices@zebra.com.
You must include the following essential device
information with your request:
•
Model number
•
Serial number
•
Proof of purchase
•
Title of the software download you are requesting.
If it is determined that your device is entitled to the
latest software release, you will receive an email
containing a link directing you to a Symbol web site to
download the appropriate software.
Symbol Technologies, Inc. End User
License Agreement
BY INSTALLING AND/OR USING THIS PRODUCT,
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS
AGREEMENT, UNDERSTAND IT AND AGREE TO BE
BOUND ITS TERMS. IF YOU DO NOT AGREE TO
THE TERMS OF THIS AGREEMENT, SYMBOL IS
NOT WILLING TO LICENSE THE PRODUCT TO
YOU, AND YOU MUST NOT USE OR INSTALL THIS
PRODUCT.
Grant of License. Symbol grants you ("Licensee" or
"you") a personal, nonexclusive, nontransferable,
nonassignable, no cost license to use the software and
documentation ("Product(s)") subject to the terms and
conditions of this Agreement. You shall use the
Products only for your internal business purposes,
exclusively to support Symbol devices. Any use of the
Products outside of the conditions set forth herein is
strictly prohibited and will be deemed a breach of this
Agreement resulting in immediate termination of your
License. In the event of a breach of this Agreement,
Symbol will be entitled to all available remedies at law
or in equity (including immediate injunctive relief and
repossession of all Products unless Licensee is a
Federal agency of the United States Government).
You shall not distribute, sublicense, rent, loan, lease,
export, re-export, resell, ship or divert or cause to be
exported, re-exported, resold, shipped or diverted,
directly or indirectly, the Products under this
Agreement. You shall not, and shall not permit others
to: (i) modify, translate, decompile, bootleg, reverse
engineer, disassemble, or extract the inner workings of
the Products, (ii) copy the look-and-feel or functionality
of the Products; (iii) remove any proprietary notices,
marks, labels, or logos from the Products; (iv) rent or
transfer all or some of the Products to any other party
without Symbol' prior written consent; or (v) utilize any
computer software or hardware which is designed to
defeat any copy protection device, should the Products
be equipped with such a protection device. Title to all
copies of Products will not pass to Licensee at any time
and remains vested exclusively in Symbol. All
intellectual property developed, originated, or prepared
by Symbol in connection with the Products remain
vested exclusively in Symbol, and this Agreement does
not grant to Licensee any intellectual property rights.
Portions of the Products are protected by United States
patent and copyright laws, international treaty
provisions, and other applicable laws. Therefore, you
must treat the Products like any other copyrighted
material (e.g., a book or musical recording) except that
you may make one copy of the Product solely for back-
up purposes. Unauthorized duplication of the Products
constitutes copyright infringement, and in the United
States is punishable in federal court by fine and
imprisonment. Disclaimer. SYMBOL MAKES, AND
YOU RECEIVE, NO WARRANTIES OF ANY KIND,
WHETHER EXPRESS, IMPLIED, STATUTORY, OR IN
ANY COMMUNICATION WITH YOU. SYMBOL
TECHNOLOGIES SPECIFICALLY DISCLAIMS ANY
WARRANTY INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILTY,
NONINFRINGEMENT, OR FITNESS FOR A
PARTICULAR PURPOSE. THE PRODUCTS ARE
PROVIDED "AS IS." SYMBOL TECHNOLOGIES
DOES NOT WARRANT THAT THE PRODUCTS WILL
MEET YOUR REQUIREMENTS, OR THAT THE
OPERATION OF THE PRODUCTS WILL BE
UNINTERRUPTED OR ERROR FREE, OR THAT
DEFECTS IN THE PRODUCTS WILL BE
CORRECTED. SYMBOL TECHNOLOGIES MAKES
NO WARRANTY WITH RESPECT TO THE
CORRECTNESS, ACCURACY, OR RELIABILITY OF
THE PRODUCTS. Some jurisdictions do not allow the
exclusion of implied warranties, so the above exclusion
may not apply to you. Limitation of Liability. THE
TOTAL LIABILITY OF SYMBOL TECHNOLOGIES
UNDER THIS AGREEMENT FOR DAMAGES SHALL
NOT EXCEED THE FAIR MARKET VALUE OF THE
PRODUCTS LICENSED UNDER THIS AGREEMENT.
IN NO EVENT WILL SYMBOL TECHNOLOGIES BE
LIABLE IN ANY WAY FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL OR
PUNITIVE DAMAGES OF ANY NATURE, INCLUDING
WITHOUT LIMITATION, LOST BUSINESS PROFITS,
OR LIABILITY OR INJURY TO THIRD PERSONS,
WHETHER FORESEEABLE OR NOT, REGARDLESS
OF WHETHER SYMBOL TECHNOLOGIES HAS
BEEN ADVISED OF THE POSSIBLITY OF SUCH
DAMAGES. Some jurisdictions do not permit limitations
of liability for incidental or consequential damages, so
the above exclusions may not apply to you. This
Limitation of Liability provision survives the termination
of this Agreement and applies notwithstanding any
contrary provision in this Agreement. Licensee must
bring any action under this Agreement within one (1)
year after the cause of action arises. Maintenance.
Unless provided for in a separate agreement, Symbol
shall not be responsible for maintenance or field
service of the Products. High Risk Activities. The
Products are not fault-tolerant and are not designed,
manufactured or intended for use or resale as on-line
control software in hazardous environments requiring
fail-safe performance, such as in the operation of
nuclear facilities, aircraft navigation or communication
systems, air traffic control, direct life support machines,
or weapons systems, in which the failure of the
Products could lead directly to death, personal injury, or
severe physical or environmental damage ("High Risk
Activities"). Symbol and its suppliers specifically
disclaim any express or implied warranty of fitness for
High Risk Activities, and if you elect to use the
Products in any High Risk Activities, you agree to
indemnify, defend, and hold Symbol harmless from and
against any and all costs, damages, and losses related
to that use. U.S. Government. If you are acquiring the
Products on behalf of any unit or agency of the U.S.
Government, the following shall apply. Use, duplication,
or disclosure of the Products is subject to the
restrictions set forth in subparagraphs (c) (1) and (2) of
the Commercial Computer Software - Restricted Rights
clause at FAR 52.227-19 (JUNE 1987), if applicable,
unless being provided to the Department of Defense. If
being provided to the Department of Defense, use,
duplication, or disclosure of the Products is subject to
the restricted rights set forth in subparagraph (c) (1) (ii)
of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013 (OCT 1988), if
applicable. Products may or may not include a
Restricted Rights notice, or other notice referring
specifically to the terms and conditions of this
Agreement. The terms and conditions of this
Agreement shall each continue to apply, but only to the
extent that such terms and conditions are not
inconsistent with the rights provided to you under the
aforementioned provisions of the FAR and DFARS, as
applicable to the particular procuring agency and
procurement transaction. Governing Law. This
Agreement shall be governed by the laws of the United
States of America to the extent that they apply and
otherwise by the laws of the State of New York without
regard to its conflict of laws provisions. Compliance
with Laws. Licensee will comply with all applicable laws
and regulations, including export laws and regulations
of the United States. Licensee will not, without the prior
authorization of Symbol and the appropriate
governmental authority of the United States, in any
form export or re-export, sell or resell, ship or reship, or
divert, through direct or indirect means, any item or
technical data or direct or indirect products sold or
otherwise furnished to any person within any territory
for which the United States Government or any of its
agencies at the time of the action, requires an export
license or other governmental approval. Violation of
this provision will be a material breach of this
Agreement, permitting immediate termination by
Symbol.
Third Party Software. The Products may contain one or
more items of Third-Party Software. The terms of this
Agreement govern your use of any Third-Party
Software UNLESS A SEPARATE THIRD-PARTY
SOFTWARE LICENSE IS INCLUDED, IN WHICH
CASE YOUR USE OF THE THIRD-PARTY
SOFTWARE WILL THEN BE GOVERNED BY THE
SEPARATE THIRD-PARTY LICENSE.
Open Source Software. The Products may contain one
or more items of Open Source Software. Open Source
Software is software covered by a publicly available
license governed solely under Copyright law, whereas
the complete terms and obligations of such license
attach to a licensee solely through the act of copying,
using and/or distribution of the licensed software, such
obligations often include one or more of attribution
obligations, distribution obligations, copyleft
obligations, and intellectual property encumbrances.
The use of any Open Source Software is subject to the
terms and conditions of this Agreement as well as the
terms and conditions of the corresponding license of
each Open Source Software package. If there is a
conflict between the terms and conditions of this
Agreement and the terms and conditions of the Open
Source Software license, the applicable Open Source
Software license will take precedence. Copies of the
licenses for the included Open Source Software, if any,
as well as their attributions, acknowledgments, and
software information details, are provided in the
electronic copy of this Agreement, which is available in
the Legal Notices or README file associated with the
Product. Symbol is required to reproduce the software
licenses, acknowledgments and copyright notices as
provided by the authors and owners, thus, all such
information is provided in its native language form,
without modification or translation.
Depending on the license terms of the specific Open
Source Software, source code may not be provided.
Please reference and review the entire Open Source
Software information to identify which Open Source
Software packages have source code provided or
available. For instructions on how to obtain a copy of
any source code made publicly available by Symbol
related to Open Source Software distributed by
Symbol, you may send your request (including the
Symbol Product name and version, along with the
Open Source Software specifics) in writing to: Symbol,
Inc., Open Source Software Management, One
Motorola Plaza Holtsville, NY 11742-1300 USA.
CMM Disclosure
本表格依据 SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含
量均在 GB/T 26572 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料
中的含量超出 GB/T 26572 规定的限量要求。(
企业可在此处，根据实际情况对上表中打
“×” 的技术原因进行进一步说明。）
This table was created to comply with China
RoHS requirements.
部件名称
(Parts)
有害物质
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
金属部件
(Metal Parts)
XOO O O O
电路模块
(Circuit Modules)
XOO O O O
电缆及电缆组件
(Cables and Cable
Assemblies)
OOO O O O
塑料和聚合物部
件
(Plastic and
Polymeric Parts)
OOO O O O
光学和光学组件
(Optics and Optical
Components)
OOO O O O
电池
(Batteries)
OOO O O O
Review Copy