Symbol Technologies MC18N0 MC18 Personal Shopper - Barcode Scanner User Manual MN000835A03a

Symbol Technologies Inc MC18 Personal Shopper - Barcode Scanner MN000835A03a

User manual (statements)

We reserves the right to make changes to any product to improve reliability, function, or design. We do not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to  any  combination,  system,  apparatus,  machine,   material, method, or process in which our products might be used. An implied license exists only for equipment, circuits, and subsystems contained in our products.WarrantyFor the complete hardware product warranty statement, go to: http://www.zebra.com/warranty.Service InformationIf you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Global Customer Support at: http://www.zebra.com/support. For detailed documentation and the latest version of this guide go to: http://www.zebra.com/supportMC18QUICK REFERENCE GUIDEZebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. The Symbol logo is a registered trademark of Symbol Technologies, Inc., a Zebra Technologies company.© 2015 ZIH Corp and/or its affiliates. All rights reserved.MN000835A03 Revision A - April 2015IntroductionThis Quick Reference Guide describes the mainfeatures of the MC18, scanning bar codes, installingand removing a battery and manual release of a lockedMC18 from a cradle.This guide also provides regulatory information.UnpackingCarefully remove all items from the shipping box andsave the shipping box for later storage and shipping.Verify that you received all the items listed below:•MC18•Lithium-ion battery•This Quick Reference Guide.FeaturesScanning Bar CodesTo scan:1. Launch a scanning application.2. Press the scan key and aim the MC18 at a bar code.3. Adjust the position of the MC18 so that the red aiming dot appears at the center of the bar code.Upon successful decode, the LED blinks green and the unit may also beep.Installing the BatteryTo install the battery:1. Using Torx T8 drive, remove two screws that secure the battery cover.2. Lift the battery cover from the handle.3. Guide and press the battery cable connector into the female connector inside the battery compartment. The connector is designed to only fit one way.LEDRed: bar code scan in progress (Scan key is pressed).Single green blink:Successful decode.DisplayScan keySpeakerBattery CoverPower ConnectorScan WindowRed Aiming DotWrongRight4. Place the battery inside the battery compartment.5. Place the battery cover onto the handle.Secure the battery cover with the two Torx screws using a T8 Torx drive. Torque the screws to 3.6 Kgf-cm (3.1 in-lb).Removing the BatteryTo remove the battery:1. Use T8 Torx drive to remove the two screws that secure the battery cover.2. Lift the battery cover from the handle.3. Inside the battery compartment, press down the plastic tab of the Battery cable connector and slide it out of the female connector.4. Remove the battery from the battery compartment.Charging the BatteryTo charge the battery, Insert the MC18 into the cradle.With a fully depleted battery, the MC18 fully charges inapproximately four hours. Refer to the MC18 Product Reference Guide for specific charging profile information.Battery CoverBatteryBattery Cable ConnectorBattery CompartmentBattery Cable ConnectorPress down plastic tab to releaseSingle Slot CradleThree Slot CradleManual Release of MC18 from Charging CradlesSome cradle models contain a locking mechanism that locks the MC18 into the cradle. The MC18 releases from the cradle via a software command to the cradle.If the MC18 does not unlock from the cradle, unlock it manually as described below..Three Slot Cradle - Release Key1. Insert the release key straight into the socket.2. While pressing the release key all the way to the endof the socket, remove the MC18 from the socket.Single Slot Cradle - Release Key1. Insert the release key into the slot located at the bottom side of the cradle.2. While pressing the release key all the way into the slot, remove the MC18 from the cradle.Regulatory InformationThis guide applies to the following Model Number: MC18N0.All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: www.zebra.com/supportAny changes or modifications to Symbol equipment, not expressly approved by Symbol, could void the user's authority to operate the equipment.Bluetooth® Wireless TechnologyThis is an approved Bluetooth® product. For more information or to view End Product Listing, please visit https://www.bluetooth.org/tpg/listings.cfmWireless Device Country ApprovalsRegulatory markings, subject to certification, are applied to the device signifying the radio(s) is approved for use in the following countries: United States, Canada, Australia and Europe1. Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at: http://www.zebra.com/doc1Note: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.Operation of the device without regulatory approval is illegal.Ad-Hoc Operation (2.4 GHz band)Ad-Hoc operation is limited to Channels 1-11 (2412-2462 MHz). CAUTION Do not use any device to unlock the cradle other than the tools described below. Failure to comply could result in damage to the cradle and void the warranty.CAUTION Only use Symbol approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet devices or batteries. All components must be dry before connecting to an external power source.Declared maximum operating temperature: 104°F (40°C).Release KeyRelease KeyFrequency of Operation - IC Industry Canada Statement:Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-Channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.Avertissement: Le dispositive fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bands 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.Health and Safety RecommendationsErgonomic Recommendations Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury.•Reduce or eliminate repetitive motion•Maintain a natural position•Reduce or eliminate excessive force•Keep objects that are used frequently within easy reach•Perform tasks at correct heights•Reduce or eliminate vibration•Reduce or eliminate direct pressure•Provide adjustable workstations•Provide adequate clearance•Provide a suitable working environment•Improve work procedures Warnings for Use of Wireless DevicesPlease observe all warning notices with regard to the usage of wireless devices.PacemakersPacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research.Persons with Pacemakers:•Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.•Should not carry the device in a breast pocket.•Should use the ear furthest from the pacemaker to minimise the potential for interference.•If you have any reason to suspect that interference is taking place, turn OFF your device.Other Medical DevicesPlease consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device.RF Exposure Guidelines Safety InformationReducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied.InternationalThe device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on “International” human exposure to electromagnetic fields refer to the Symbol Declaration of Conformity (DoC) at: http://www.zebra.com/docFor further information on the safety of RF energy from wireless devices - see https://www.zebra.com/us/en/about-zebra/company-information/corporate-responsibility.htmlLocated under Wireless Communications and Health.EuropeHandheld Devices - This device was tested for hand-held and body-worn conditions. To satisfy EU RF exposure requirements, the transmitting device must operate with a minimum separation distance of 1 cm or more from a person’s bodyUS and CanadaCo-located StatementTo comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except those already approved in this filling.Handheld DevicesThis device was tested for hand-held and body-worn conditions. To satisfy US and Canadian RF exposure requirements, the transmitting device must operate with a minimum separation distance of 1 cm or more from a person’s body.Pour satisfaire aux exigences Américaines et Canadiennes d'exposition aux radiofréquences, un dispositif de transmission doit fonctionner avec une distance de séparation minimale de 1 cm ou plus de corps d'une personne.LED DevicesLED Compliance Statement:Classified as "EXEMPT RISK GROUP" according to IEC 62471:2006 and EN 62471:2008. Power SupplyFor charge cradle, use ONLY an approved UL LISTED ITE (IEC/EN 60950-1, LPS/SELV) power supply with electrical ratings: Output 12Vdc, min 9A, with a maximum ambient temperature of at least 50°C.Use of alternative power supply will invalidate any approvals given to this unit and may be dangerous.BatteriesBattery InformationCAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions.Use only Symbol approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:Symbol BT000018A01 (3.7 Vdc, 2725 mAh typical)Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Symbol batteries is one year, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Symbol batteries, please visit: http://www.zebra.com/batterybasics.Battery Safety Guidelines•The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment.•Follow battery usage, storage, and charging guidelines found in the user's guide.•Improper battery use may result in a fire, explosion, or other hazard.•To charge the mobile device battery, the battery and charger temperatures must be between +32°F and +104°F (0°C and +40°C) •Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Symbol Global Customer support.•Do not disassemble or open, crush, bend or deform, puncture, or shred.•Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.•Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.•Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard.•Do not leave or store the equipment in or near areas that might get very hot, such as in a parked Review Copy
vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.•Battery usage by children should be supervised.•Please follow local regulations to promptly dispose of used re-chargeable batteries.•Do not dispose of batteries in fire.•Seek medical advice immediately if a battery has been swallowed.•In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice.•If you suspect damage to your equipment or battery, contact Symbol Global Customer support to arrange for inspection.Use with Hearing AidsWhen some wireless devices are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and wireless devices also vary in the amount of interference they generate. In the event of interference you may want to consult your hearing aid supplier to discuss solutions.This device is not HAC compliant.Radio Frequency Interference Requirements- FCCNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna•Increase the separation between the equipment and receiver•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected•Consult the dealer or an experienced radio/TV technician for helpRadio Transmitters (Part 15)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Radio Frequency Interference Requirements - CanadaRadio TransmittersCAN ICES-3 (B)/NMB-3(B)The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:•Restricted Band 5.60 - 5.65 GHz This device complies with Industry Canada licence - exempt RSS standard(s). Operation is subject to the following two conditions: (1) the device must not produce interference, and (2) the device must accept any interference to the radio, even if the interference is likely to compromise operation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical specifications were met.Marking and European Economic Area (EEA)The use of 2.4GHz RLAN's, for use through the EEA, have the following restrictions:•Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz. Bluetooth® Wireless Technology for use through the EEA has the following restrictions:•Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz.Statement of ComplianceSymbol hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity may be obtained from http://www.zebra.com/docOther CountriesAustraliaUse of 5 GHz RLAN's in Australia is restricted in the following band 5.60 - 5.65GHz.Brazil (UNWANTED EMISSIONS - ALL PRODUCTS) Regulatory declarations for MC18N0 - BRAZILFor more information consult the website www.anatel.gov.br.Declarações Regulamentares para MC18N0 - BrazilNota: “A marca de certificação se aplica ao Transceptor, modelo MC18N0. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.”Para maiores informações sobre ANATEL consulte o site:www.anatel.gov.br.Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resolução n°242/2000 e atende aos requisitos técnicos aplicados, incluindo os limites de exposição da Taxa de Absorção Específica referente a campos elétricos, magnéticos e eletromagnéticos de radiofrequência, de acordo com as Resoluções n° 303/2002 e 533/2009.Este dispositivo está em conformidade com as diretrizes de exposição à radiofrequência quando posicionado pelo menos 1 centímetros de distância do corpo. Para maiores informações, consulte o site da Anatel.ChileEste equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnéticas.Hong Kong In accordance with HKTA1039, the band 5.15GHz - 5.35GHz is for indoor operation only.MexicoRestrict Frequency Range to: 2.450 - 2.4835 GHz.La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.Thailandเครื่ องโทรคมนาคมและอุปกรณ นี้ มี ความสอดคลองตามขอกําหนดของ กทช .Open Source Software InformationFor instructions on how to obtain a copy of any source code being made Open Source by Symbol related to software used in this Symbol Product you may send your request in writing to:Symbol Technologies, Inc. Open Source Software Management 1301 E. Algonquin Road Schaumburg, IL 60196, U.S.A.In your request, please include the Symbol Product Name and Version, along with the Open Source Software specifics, such as the Open Source Software Name and Version.Note, the source code for the Open Source Software may be resident on the Symbol Product Installation Media, or on supplemental Symbol Product Media. Please reference and review the entire Symbol Open Source Software Legal Notices and End User License Agreement for the details on location and methods of obtaining the source code. Note, dependent on the license terms of the Open Source Software, source code may not be provided. Please reference and review the entire Symbol Open Source Software Legal Notices and End User License Agreement for identifying which Open Source Software Packages will have source code provided. To view additional information regarding licenses, acknowledgements and required copyright notices for open source packages used in this Symbol product, touch Settings > About phone > Legal information > Open source licenses.English: For EU Customers: All products at the end of their life must be returned to Symbol for Waste Electrical and Electronic Equipment (WEEE)recycling. For information on how to return product, please go to: http://www.zebra.com/weee.Français: Clients de l'Union Européenne: Tous les produits en fin de cycle de vie doivent être retournés à Symbol pour recyclage. Pour de plus amples informations sur le retour de produits, consultez: http://www.zebra.com/weee.Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Symbol al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite: http://www.zebra.com/weee.Български: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на Symbol за рециклиране. За информация относно връщането на продукти, моля отидете на адрес: http://www.zebra.com/weee.Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Symbol zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter http://www.zebra.com/weee.Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Symbol al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente sito Web: http://www.zebra.com/weee.Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Symbol para reciclagem. Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee.Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Symbol te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het terugzenden van producten.Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy Symbol w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej http://www.zebra.com/weee.Čeština: Pro zákazníky zEU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti Symbol krecyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce: http://www.zebra.com/weee.Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Symbol'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: http://www.zebra.com/weee.Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Symbol vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a http://www.zebra.com/weee weboldalra.Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Symbol za reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Symbol för återvinning. Information om hur du returnerar produkten finns på http://www.zebra.com/weee.Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Symbol-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee.Dansk: Til kunder i EU: Alle produkter skal returneres til Symbol til recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter på: http://www.zebra.com/weee.Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Symbol για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο.Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Symbol għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur: http://www.zebra.com/weee.Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Symbol za reciklažo. Za informacije o vračilu izdelka obiščite: http://www.zebra.com/weee.Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti vrátené spoločnosti Symbol na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na: http://www.zebra.com/weee.Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją „Symbol“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Symbol otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Symbol, lūdzu, skatiet: http://www.zebra.com/weee.Turkish WEEE Statement of ComplianceEEE Yönetmeliğine Uygundur.Software SupportSymbol wants to ensure that customers have the latest release of entitled software at the time of product purchase.To confirm that your Symbol device shipped with the latest release of entitled software, visit: www.zebra.com/support. Check for the latest software from Software Downloads > Product Line/Product > Go.If your device does not have the latest entitled software release as of your product purchase date, please e-mail a request to:entitlementservices@zebra.com.You must include the following essential device information with your request:•Model number•Serial number•Proof of purchase•Title of the software download you are requesting.If it is determined that your device is entitled to the latest software release, you will receive an email containing a link directing you to a Symbol web site to download the appropriate software.Symbol Technologies, Inc. End User License AgreementBY INSTALLING AND/OR USING THIS PRODUCT, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, SYMBOL IS NOT WILLING TO LICENSE THE PRODUCT TO YOU, AND YOU MUST NOT USE OR INSTALL THIS PRODUCT.Grant of License. Symbol grants you ("Licensee" or "you") a personal, nonexclusive, nontransferable, nonassignable, no cost license to use the software and documentation ("Product(s)") subject to the terms and conditions of this Agreement. You shall use the Products only for your internal business purposes, exclusively to support Symbol devices. Any use of the Products outside of the conditions set forth herein is strictly prohibited and will be deemed a breach of this Agreement resulting in immediate termination of your License. In the event of a breach of this Agreement, Symbol will be entitled to all available remedies at law or in equity (including immediate injunctive relief and repossession of all Products unless Licensee is a Federal agency of the United States Government).You shall not distribute, sublicense, rent, loan, lease, export, re-export, resell, ship or divert or cause to be exported, re-exported, resold, shipped or diverted, directly or indirectly, the Products under this Agreement. You shall not, and shall not permit others to: (i) modify, translate, decompile, bootleg, reverse engineer, disassemble, or extract the inner workings of the Products, (ii) copy the look-and-feel or functionality of the Products; (iii) remove any proprietary notices, marks, labels, or logos from the Products; (iv) rent or transfer all or some of the Products to any other party without Symbol' prior written consent; or (v) utilize any computer software or hardware which is designed to defeat any copy protection device, should the Products be equipped with such a protection device. Title to all copies of Products will not pass to Licensee at any time and remains vested exclusively in Symbol. All intellectual property developed, originated, or prepared by Symbol in connection with the Products remain vested exclusively in Symbol, and this Agreement does not grant to Licensee any intellectual property rights. Portions of the Products are protected by United States patent and copyright laws, international treaty provisions, and other applicable laws. Therefore, you must treat the Products like any other copyrighted material (e.g., a book or musical recording) except that you may make one copy of the Product solely for back-up purposes. Unauthorized duplication of the Products constitutes copyright infringement, and in the United States is punishable in federal court by fine and imprisonment. Disclaimer.   SYMBOL MAKES, AND YOU RECEIVE, NO WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR IN ANY COMMUNICATION WITH YOU. SYMBOL TECHNOLOGIES SPECIFICALLY DISCLAIMS ANY WARRANTY INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILTY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. THE PRODUCTS ARE PROVIDED "AS IS." SYMBOL TECHNOLOGIES DOES NOT WARRANT THAT THE PRODUCTS WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE PRODUCTS WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS IN THE PRODUCTS WILL BE CORRECTED. SYMBOL TECHNOLOGIES MAKES NO WARRANTY WITH RESPECT TO THE CORRECTNESS, ACCURACY, OR RELIABILITY OF THE PRODUCTS. Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you. Limitation of Liability. THE TOTAL LIABILITY OF SYMBOL TECHNOLOGIES UNDER THIS AGREEMENT FOR DAMAGES SHALL NOT EXCEED THE FAIR MARKET VALUE OF THE PRODUCTS LICENSED UNDER THIS AGREEMENT. IN NO EVENT WILL SYMBOL TECHNOLOGIES BE LIABLE IN ANY WAY FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST BUSINESS PROFITS, OR LIABILITY OR INJURY TO THIRD PERSONS, WHETHER FORESEEABLE OR NOT, REGARDLESS OF WHETHER SYMBOL TECHNOLOGIES HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. Some jurisdictions do not permit limitations of liability for incidental or consequential damages, so the above exclusions may not apply to you. This Limitation of Liability provision survives the termination of this Agreement and applies notwithstanding any contrary provision in this Agreement. Licensee must bring any action under this Agreement within one (1) year after the cause of action arises. Maintenance. Unless provided for in a separate agreement, Symbol shall not be responsible for maintenance or field service of the Products.  High Risk Activities. The Products are not fault-tolerant and are not designed, manufactured or intended for use or resale as on-line control software in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the Products could lead directly to death, personal injury, or severe physical or environmental damage ("High Risk Activities"). Symbol and its suppliers specifically disclaim any express or implied warranty of fitness for High Risk Activities, and if you elect to use the Products in any High Risk Activities, you agree to indemnify, defend, and hold Symbol harmless from and against any and all costs, damages, and losses related to that use. U.S. Government. If you are acquiring the Products on behalf of any unit or agency of the U.S. Government, the following shall apply. Use, duplication, or disclosure of the Products is subject to the restrictions set forth in subparagraphs (c) (1) and (2) of the Commercial Computer Software - Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if applicable, unless being provided to the Department of Defense. If being provided to the Department of Defense, use, duplication, or disclosure of the Products is subject to the restricted rights set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 (OCT 1988), if applicable. Products may or may not include a Restricted Rights notice, or other notice referring specifically to the terms and conditions of this Agreement. The terms and conditions of this Agreement shall each continue to apply, but only to the extent that such terms and conditions are not inconsistent with the rights provided to you under the aforementioned provisions of the FAR and DFARS, as applicable to the particular procuring agency and procurement transaction. Governing Law. This Agreement shall be governed by the laws of the United States of America to the extent that they apply and otherwise by the laws of the State of New York without regard to its conflict of laws provisions. Compliance with Laws. Licensee will comply with all applicable laws and regulations, including export laws and regulations of the United States. Licensee will not, without the prior authorization of Symbol and the appropriate governmental authority of the United States, in any form export or re-export, sell or resell, ship or reship, or divert, through direct or indirect means, any item or technical data or direct or indirect products sold or otherwise furnished to any person within any territory for which the United States Government or any of its agencies at the time of the action, requires an export license or other governmental approval. Violation of this provision will be a material breach of this Agreement, permitting immediate termination by Symbol.Third Party Software. The Products may contain one or more items of Third-Party Software. The terms of this Agreement govern your use of any Third-Party Software UNLESS A SEPARATE THIRD-PARTY SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF THE THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED BY THE SEPARATE THIRD-PARTY LICENSE.Open Source Software. The Products may contain one or more items of Open Source Software. Open Source Software is software covered by a publicly available license governed solely under Copyright law, whereas the complete terms and obligations of such license attach to a licensee solely through the act of copying, using and/or distribution of the licensed software, such obligations often include one or more of attribution obligations, distribution obligations, copyleft obligations, and intellectual property encumbrances. The use of any Open Source Software is subject to the terms and conditions of this Agreement as well as the terms and conditions of the corresponding license of each Open Source Software package. If there is a conflict between the terms and conditions of this Agreement and the terms and conditions of the Open Source Software license, the applicable Open Source Software license will take precedence. Copies of the licenses for the included Open Source Software, if any, as well as their attributions, acknowledgments, and software information details, are provided in the electronic copy of this Agreement, which is available in the Legal Notices or README file associated with the Product. Symbol is required to reproduce the software licenses, acknowledgments and copyright notices as provided by the authors and owners, thus, all such information is provided in its native language form, without modification or translation. Depending on the license terms of the specific Open Source Software, source code may not be provided. Please reference and review the entire Open Source Software information to identify which Open Source Software packages have source code provided or available. For instructions on how to obtain a copy of any source code made publicly available by Symbol related to Open Source Software distributed by Symbol, you may send your request (including the Symbol Product name and version, along with the Open Source Software specifics) in writing to: Symbol, Inc., Open Source Software Management, One Motorola Plaza Holtsville, NY 11742-1300 USA.CMM Disclosure本表格依据 SJ/T 11364 的规定编制。O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。(企业可在此处,根据实际情况对上表中打“×” 的技术原因进行进一步说明。)This table was created to comply with China RoHS requirements.部件名称(Parts) 有害物质 铅(Pb)汞(Hg)镉(Cd)六价铬(Cr(VI))多溴联苯(PBB)多溴二苯醚(PBDE)金属部件 (Metal Parts)XOO O O O电路模块 (Circuit Modules)XOO O O O电缆及电缆组件(Cables and Cable Assemblies)OOO O O O塑料和聚合物部件 (Plastic and Polymeric Parts)OOO O O O光学和光学组件 (Optics and Optical Components)OOO O O O电池 (Batteries)OOO O O OReview Copy

Navigation menu