Sysgration SY-SHE-M-001 BLE Mesh Module User Manual CSR1012 BLE Module PRD ForFCC V0 5 20150903
Sysgration Ltd. BLE Mesh Module CSR1012 BLE Module PRD ForFCC V0 5 20150903
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2743881 |
| Application ID | 35krm5bb84kqjkjSE9LHXg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 10.59kB (132433 bits) |
| Date Submitted | 2015-09-11 00:00:00 |
| Date Available | 2015-09-11 00:00:00 |
| Creation Date | 2015-09-03 12:24:50 |
| Producing Software | GPL Ghostscript 9.07 |
| Document Lastmod | 2015-09-10 10:46:07 |
| Document Title | CSR1012 BLE Module PRD_ForFCC V0.5_20150903 |
| Document Creator | PDFCreator Version 1.7.1 |
| Document Author: | jimmychu |
Product Features CSR 1012 Single Chip solution: Bluetooth Specification 4.1 compliant 128KB memory: 64KB RAM and 64KB ROM RF Features: Transmitter Power: ≧0 dBm Receiver sensitivity: -85 dBm Typ External EEPROM memory provides storage for the Bluetooth software parameter and application parameter Electrical: DC Supply: 1.8V ~3.6V Low current consumption: 16 mA @3V (Peak Current) Small size: 18mm × 12mm ×2.3mm (L x W x H) SYSGRATION / Avi-on Confidential & Proprietary 2015-09-03 2.6 Mechanical Requirements Item Feature 2.6.1 2.6.2 PCB Weight Detailed Description 12 mm * 18 mm * 0.8mm N/A Top View: SYSGRATION / Avi-on Confidential & Proprietary 2015-09-03 Bottom View: SYSGRATION /Avi-on Confidential & Proprietary 2015-09-03 2.7 Pin Assignment: SYSGRATION / Avi-on Confidential & Proprietary 2015-09-03 Pin Assignment Description: Pins Name J1 WAKE J2 J3 J4 XTAL_32K_IN XTAL_32K_OUT I2C_SCL J5 J6 VBATT I2C_SDA J7 SPI_PION J8 J9 J10 J11 J12 J13 J14 J15 J16 J17 J18 J19 J20 J21 J22 J23 J24 J25 J26 PIO[11] PIO[10] PIO[9] SPI_MISO SPI_MOSI SPI_CSB SPI_CLK PIO[4] VDD_PADS PIO[3] UART0_RX UART0_TX AIO[0] AIO[1] AIO[2] GND GND GND GND Function Description Input to wake CSR1012 from hibernate or dormant. Default is pull-down. Analog in 32.768KHz installed, Disconnect all to this Pin. Analog In 32.768KHz installed, Disconnect all to this Pin. I/O SPI serial flash installed, or I2C clock Input / output. Power Power input. I/O SPI serial flash installed, or I2C data Input / output. Selects SPI debug or Programmable I/O, Pull-High : SPI debug Pull-down: Programmable I/O line, default is. I/O Programmable I/O I/O Programmable I/O I/O Programmable I/O SPI data output or Programmable I/O SPI data input or Programmable I/O SPI select or Programmable I/O I/O SPI clock or Programmable I/O I/O Programmable I/O Power Positive supply for all digital I/O ports I/O Programmable I/O UART RX or Programmable I/O UART TX or Programmable I/O I/O Analogue Programmable I/O I/O Analogue Programmable I/O I/O Analogue Programmable I/O Ground Ground Ground Ground Ground Ground Ground Ground SYSGRATION /Avi-on Confidential & Proprietary 2015-09-03 Recommended of PCB Layout Pads SYSGRATION / Avi-on Confidential & Proprietary 2015-09-03 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). End Product Labeling This transmitter module is authorized only for use in devices where the antenna may be installed such that 0.5 cm may be maintained between the antenna and users. The final end product must be labeled in visible area with the following: “Contains FCC ID: HQXSY-SHE-M-001” ” End Product Manual Information The user manual for end users must include the following information in a prominent location “IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter.” This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or colocation with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 0.5 cm is maintained between the antenna and users. As long as a condition above is met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : jimmychu Create Date : 2015:09:03 12:24:50+08:00 Modify Date : 2015:09:10 10:46:07+08:00 Subject : XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : GPL Ghostscript 9.07 Keywords : Creator Tool : PDFCreator Version 1.7.1 Metadata Date : 2015:09:10 10:46:07+08:00 Document ID : uuid:3f073eff-544f-11e5-0000-4d7c52c40f01 Instance ID : uuid:982dfba3-75bb-4f1d-8d1d-bf401d30e860 Format : application/pdf Title : CSR1012 BLE Module PRD_ForFCC V0.5_20150903 Creator : jimmychu Description : Description (x-repair) : Page Count : 8EXIF Metadata provided by EXIF.tools