Systems and Technology STAVL1007 INTELLITRAC User Manual A1 LITE User Guide 001

Systems & Technology Corp. INTELLITRAC A1 LITE User Guide 001

Users Manual

   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T.     IInntteelllliiTTrraacc  AA11--lliittee  SSeerriieess    UUsseerr  GGuuiiddee       Version:  V0.1 Date:    26 May 2010 Status:   Preliminary
   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. General notes   With respect to any damages arising in operation with the described product or this document, S&T shall be liable according to the General Conditions on which the delivery of the described product and this document are based. This product is not intended for use in life support appliances, devices or systems where a malfunction of the product can reasonably be expected to result in personal injury. S&T customers using or selling this product for use in such applications do so at their own risk and agree to fully indemnify S&T for any damages resulting from illegal use or resale. Information in this document is subject to change without notice at any time.  Copyright notice  Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages.  © Systems & Technology Corp. All rights reserved
IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. TTaabbllee  OOff  CCoonntteennttss  1. Introduction.............................................................................................................................1 1.1 Scope  ........................................................................................................................................1 1.2 About IntelliTrac A1-lite ................................................................................................................2 1.3 Hardware Architecture .................................................................................................................3 1.4 Related Documents .....................................................................................................................4 2. Basic Operations.....................................................................................................................4 2.1 Hardware Installation ...................................................................................................................4 2.2 Connectors Pins Assignment.......................................................................................................6 2.3 Device Configurations..................................................................................................................7 2.4 Communication Settings ............................................................................................................ 11 2.5 GPS Tracking Configurations.....................................................................................................13 2.6 Firmware Upgrade .....................................................................................................................15 3. Technical Specification for IntelliTrac A1-lite...................................................................16 4. About Systems & Technology Corporation........................................................................17
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 1 -   11..IInnttrroodduuccttiioonn  Thank you for your purchasing IntelliTrac A1-lite GPS Vehicle Tracking device. The benefits are:   Improve Safety   Ensure Security   Good efficiency on Fleet management and Dispatch solution   Asset and resource management   Economic operation and improving productivity   Keep the Journey record for future analysis or accident report   Where is the Car? When it will arrive? What is its speed now?     1.1  Scope The purpose of this document is to describe how to getting started with the IntelliTrac A Series devices. The document contains basic device configuration. For advanced users, please refer to the IntelliTrac A Series Protocol Document for detailed information.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 2 -  1.2  About IntelliTrac A1-lite The IntelliTrac A1-lite GPS Unit wirelessly transmits location, peripheral, and vehicle control data to a control center.    Location data, including speed, direction, mileage, and altitude, is provided by an onboard GPS receiver. Wireless transmission is achieved using an onboard GSM/GPRS module. A microcontroller is used to poll location and command data at regular intervals, derive actions based on location, peripheral, and control data, and execute those actions.  One of the best feature of A series AVL is that they can transit data on ASCII mode or Binary mode.  Peripheral data indicates the status of the various peripherals that are connected to and/or controlled by the unit. Peripherals include, but not limited to, door locks/un-locks , starter interrupt, ignition, battery, engine and panic button.    Firmware on the device applies intelligent filtering to overcome coverage limitations for both GPS and GSM/GPRS networks.    Motion sensor is used to control the status of the unit, either sleep, idle, or full power, there by controlling the amount of current the unit consumes.  Backup battery and tamper sensing GPS Antennas are primarily used to indicate loss of Main Power and loss of GPS antenna connectivity.  Device supports Over-the-air firmware upgrade to deliver added functionality without physically touching the device once installed.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 3 - 1.3  Hardware Architecture The IntelliTrac A1-lite hardware includes Micro-controller, GPS receiver, GSM/GPRS modem, G-Force sensor, I/Os interfac.   .    User can use PC HyperTerminal connect to the Diagnostic / setting port to configure the AVL.   The G-Sensor is used for car accident. Car tow-away warning and power management.   GPIO can be used to connect to any customer monitoring points (door switch, anti-thief) or Actuators.   RS232 Expansion port .   RTOS OPTION: We will have A1, A3 professional version with Real Time operation system in JAN.2010.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 4 - 1.4  Related Documents [1] IntelliTrac A Series Protocol Document Basic Operations   1.5  Hardware Installation (1)  SIM Card Installation   Press yellow button to eject the SIM card holder.   Put the SIM card on the SIM card holder.   Insert the SIM card holder to the device correctly.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 5 - (2)  GPS Antenna Installation   Connect the GPS antenna to the right-down corner SMA connector.   Recommended mating torque for the SMA connector is 7-10 inch pounds (80-110 N.cm).     (3)  Power,RS-232 and I/O Cable Installation   Connect 4-wires power cable to the device, The D-SUB can be connected to the COM port of PC.   Connect 8-wires cable to the device. And plug on a DC power supply (8~30V) and I/O.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 6 - 1.6  Connectors Pins Assignment PWR / IO Connector Pin# Signal Name  Description  IO Electrical Characteristic 1  DC IN  Red  I  VI = DC8 to 30V, Inormal = 70mA @12V 2  GND  Black  -  3  Ignition  Brown  I  VIHmin = 30V, VILmax = 6.8V(High Active) 4  Output1  Orange  O  Imax = 300mA 5  Input1  Yellow  I  VIHmax = 30V, VILmax = 0.7V 6  Output2  Green  O  Imax = 300mA SERIAL Connector Pin# Signal Name  Description  IO Electrical Characteristic 1  Vout  Blue  O  Vo = 5.0V, Imax = 250mA 2  TX1  Purple  O   3  RX1  Gray  I   4  GND  White  -   Connectors pin definition
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 7 - Device Configurations For the first installation, some basic parameters should be set before installation. The device parameters can be set through RS-232 port by using HyperTerminal program. Please see below for the HyperTerminal settings: (1) Open HyperTerminal  (2) Choose correct COM port (3) Baud Rate57600bps, Data Bits8, ParityNone, Stop Bits1, Flow ControlNone
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 8 - (4) Choose [File][Properties] and click [ASCII Setup…]  (5) Checked below ASCII Sending options
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 9 - (4)  Connect D-Sub connector to your PC and power on the device. The device startup message will be shown on the HyperTerminal.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 10 - (5)  Type ATI command and press [Enter] key, the hardware and firmware version will be shown on the HyperTerminal. If the HyperTerminal is shown like below, that means connection between the device and PC is working properly. It is ready to send all configuration commands from now on.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 11 - Communication Settings There are two communication modes for the IntelliTrac A series device to communicate to the control center. One is SMS, and the other is GPRS (TCP/UDP). The device should be set communication parameters before install the device to vehicle.  (1)  SMS Configuration Setting SMS control center phone number or short code by using AT$SMSDST command. For example, the SMS control center phone number is +886123456789, issue the AT$SMSDST command in HyperTerminal like below:  AT$SMSDST=+886123456789 OK  Then you can try to use cellular phone or SMS gateway to send a SMS message to the A1 device.  Send a SMS message  "AT$MODID?"  Device will response: $MODID=101000001 OK (Type AT&W command to save all command parameters into the non-volatile memory of the device.) AT&W OK  This proves the mobile phone SMS connects successfully.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 12 - (2)  GPRS Configuration Setting GPRS server using the following commands:  AT$APN=internet,username,password     (APN=internet, Username=username, Password=password) OK AT$HOSTS=1,60.148.19.10   (Server IP address = 60.148.19.10) OK AT$RETRY=5,10   (Message retry settings) OK AT$IPTYPE=1    (Using TCP/IP mode) OK AT$PORT=6000   (Host application port) OK AT$GPRSEN=1    (GPRS enable) OK AT$HB=60      (Heartbeat setting) OK (Type AT&W command to save all command parameters into the non-volatile memory of the device.) AT&W OK  Please refer to IntelliTrac A Series Protocol Document for detailed command descriptions.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 13 - GPS Tracking Configurations After the device communication settings are done. The remote GPS tracking function can be performed. The GPS tracking function can be set by using AT$PDSR command. For example,  AT$PDSR=1,30,0,2,0,0,1,1  (Tracking through GPRS by time interval 30 seconds) OK  For the simply testing GPRS, open the TCP Server A-Series software which is provided by S&T. It is a simple server software that can wait for device connection and data.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 14 - For advanced testing, open the IntelliTrac Tracer software and set communication port properly. The device will start to connect to the Tracer software and report GPS tracking locations.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 15 - Firmware Upgrade The IntelliTrac A Series device firmware is updated through the serial interface. The firmware update of the device can be performed with the IntelliTrac A series firmware loader tool provided by S&T. It runs on Windows based PCs. Please see the following step-by-step upgrade procedure.  (1)  Connect the RS232 cable between device an PC. (2)  Turn on the device. (3)  Run AseriesLoader.exe, the following window is displayed.  (4)  Click […] button to open firmware file which provide by S&T (5)  Click Write button and start firmware programming. (6)  When the writing progress 100% is reached, the device LEDs will start to fast blinking. (7)  Wait until device LEDs stop fast blinking. (8)  Firmware update complete.
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 16 - 22..  TTeecchhnniiccaall  SSppeecciiffiiccaattiioonn  ffoorr  IInntteelllliiTTrraacc  AA11--LLiittee  CHARACTERISTICS   Dimensions ( L x W x H) 135 x 70 x 35mm(With Connector) Weight 170gm Radio Performance   Frequency (MHz) Quad-Band 850/900/1800/1900MHz Transmit Power 1W/1800MHz,1900Mhz 2W/850MHz, 900MHz GSM Functionality / GPRS     GPRS  Mode    MultiSlot Class 10/B , Mobile Station Class B GPRS  Coding  Scheme CS1,CS2,CS3 and CS4 GSM  Antenna  Internal GSM Antenna SIM  Interface Support SIM card 1.8V, 2.9V GPS Functionality   Receiver 12 Channels or above Sensitivity  (  Tracking  ) -159dBm Antenna  Type External GPS Active Antenna , 3.3V Connector SMA Female GPS Protocol NMEA 0183 Ver3.0 Onboard Components   MCU 32-bit Microcontroller Data Memory 2MB flash Motion Sensor 3-Axes Acceleration Sensor Led  Indicator 3 , Green (Power status ) , Red ( GPS, GSM status )   Interface I/O   I/O Connector   1Connectors. 4pin Serial Data I/O RS-232 (Default 57600bps) Inputs 2 Outputs 2 Electrical   Power  Source DC 8V to 30V Power  Consumption 70mA @ 12V (Full power mode) 15mA @ 12V (Low power mode) 6mA @ 12V (Very low power mode) Environment   Operating Temperature -20oC to +70oC
  IntelliTrac  A1-lite  Series  User  Guide   Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 17 - 33..  AAbboouutt  SSyysstteemmss  &&  TTeecchhnnoollooggyy  CCoorrppoorraattiioonn  IntelliTrac A-Series AVL device is produced by Systems & Technology Corporation. The company is a key developer and supplier of advanced systems in the Automatic Vehicle Location (AVL), Digital Map and Car Navigation Systems.  If you need information on other maps solutions or products, please contact us at the phone and fax numbers listed below, or visit our web sites.    Contact Information for System & Technology Corp. S&T Web Site        http://www.systech.com.tw Technical Support Hotline  +886-2-2698-1599 Technical Support E-mail  AVL@ms.systech.com.tw Main Phone        +886-2-2698-1599 Main Fax       +886-2-2698-1211

Navigation menu