Systems and Technology STAVL1007 INTELLITRAC User Manual A1 LITE User Guide 001
Systems & Technology Corp. INTELLITRAC A1 LITE User Guide 001
Users Manual
IntelliTrac A1-lite Series User Guide Version: Date: Status: V0.1 26 May 2010 Preliminary Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. General notes With respect to any damages arising in operation with the described product or this document, S&T shall be liable according to the General Conditions on which the delivery of the described product and this document are based. This product is not intended for use in life support appliances, devices or systems where a malfunction of the product can reasonably be expected to result in personal injury. S&T customers using or selling this product for use in such applications do so at their own risk and agree to fully indemnify S&T for any damages resulting from illegal use or resale. Information in this document is subject to change without notice at any time. Copyright notice Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. © Systems & Technology Corp. All rights reserved Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. IntelliTrac A1-lite Series User Guide Table Of Contents 1. Introduction.............................................................................................................................1 1.1 1.2 1.3 1.4 2. Basic Operations .....................................................................................................................4 2.1 2.2 2.3 2.4 2.5 2.6 3. 4. Scope ........................................................................................................................................ 1 About IntelliTrac A1-lite ................................................................................................................ 2 Hardware Architecture ................................................................................................................. 3 Related Documents ..................................................................................................................... 4 Hardware Installation ................................................................................................................... 4 Connectors Pins Assignment ....................................................................................................... 6 Device Configurations .................................................................................................................. 7 Communication Settings ............................................................................................................ 11 GPS Tracking Configurations..................................................................................................... 13 Firmware Upgrade ..................................................................................................................... 15 Technical Specification for IntelliTrac A1-lite...................................................................16 About Systems & Technology Corporation........................................................................17 Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. IntelliTrac A1-lite Series User Guide 1.Introduction Thank you for your purchasing IntelliTrac A1-lite GPS Vehicle Tracking device. The benefits are: Improve Safety Ensure Security Good efficiency on Fleet management and Dispatch solution Asset and resource management Economic operation and improving productivity Keep the Journey record for future analysis or accident report Where is the Car? When it will arrive? What is its speed now? 1.1 Scope The purpose of this document is to describe how to getting started with the IntelliTrac A Series devices. The document contains basic device configuration. For advanced users, please refer to the IntelliTrac A Series Protocol Document for detailed information. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -1- IntelliTrac A1-lite Series User Guide 1.2 About IntelliTrac A1-lite The IntelliTrac A1-lite GPS Unit wirelessly transmits location, peripheral, and vehicle control data to a control center. Location data, including speed, direction, mileage, and altitude, is provided by an onboard GPS receiver. Wireless transmission is achieved using an onboard GSM/GPRS module. A microcontroller is used to poll location and command data at regular intervals, derive actions based on location, peripheral, and control data, and execute those actions. One of the best feature of A series AVL is that they can transit data on ASCII mode or Binary mode. Peripheral data indicates the status of the various peripherals that are connected to and/or controlled by the unit. Peripherals include, but not limited to, door locks/un-locks , starter interrupt, ignition, battery, engine and panic button. Firmware on the device applies intelligent filtering to overcome coverage limitations for both GPS and GSM/GPRS networks. Motion sensor is used to control the status of the unit, either sleep, idle, or full power, there by controlling the amount of current the unit consumes. Backup battery and tamper sensing GPS Antennas are primarily used to indicate loss of Main Power and loss of GPS antenna connectivity. Device supports Over-the-air firmware upgrade to deliver added functionality without physically touching the device once installed. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -2- IntelliTrac A1-lite Series User Guide 1.3 Hardware Architecture The IntelliTrac A1-lite hardware includes Micro-controller, GPS receiver, GSM/GPRS modem, G-Force sensor, I/Os interfac. User can use PC HyperTerminal connect to the Diagnostic / setting port to configure the AVL. The G-Sensor is used for car accident. Car tow-away warning and power management. GPIO can be used to connect to any customer monitoring points (door switch, anti-thief) or Actuators. RS232 Expansion port . RTOS OPTION: We will have A1, A3 professional version with Real Time operation system in JAN.2010. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -3- IntelliTrac A1-lite Series User Guide 1.4 Related Documents [1] IntelliTrac A Series Protocol Document Basic Operations 1.5 Hardware Installation (1) SIM Card Installation Press yellow button to eject the SIM card holder. Put the SIM card on the SIM card holder. Insert the SIM card holder to the device correctly. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -4- IntelliTrac A1-lite Series User Guide (2) GPS Antenna Installation Connect the GPS antenna to the right-down corner SMA connector. Recommended mating torque for the SMA connector is 7-10 inch pounds (80-110 N.cm). (3) Power,RS-232 and I/O Cable Installation Connect 4-wires power cable to the device, The D-SUB can be connected to the COM port of PC. Connect 8-wires cable to the device. And plug on a DC power supply (8~30V) and I/O. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -5- IntelliTrac A1-lite Series User Guide 1.6 Connectors Pins Assignment PWR / IO Connector Pin# Signal Name DC IN GND Ignition Output1 Input1 Output2 Description Red Black Brown Orange Yellow Green IO - Description Blue Purple Gray White IO - Electrical Characteristic VI = DC8 to 30V, Inormal = 70mA @12V VIHmin = 30V, VILmax = 6.8V(High Active) Imax = 300mA VIHmax = 30V, VILmax = 0.7V Imax = 300mA SERIAL Connector Pin# Signal Name Vout TX1 RX1 GND Electrical Characteristic Vo = 5.0V, Imax = 250mA Connectors pin definition Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -6- IntelliTrac A1-lite Series User Guide Device Configurations For the first installation, some basic parameters should be set before installation. The device parameters can be set through RS-232 port by using HyperTerminal program. Please see below for the HyperTerminal settings: (1) Open HyperTerminal (2) Choose correct COM port (3) Baud Rate57600bps, Data Bits8, ParityNone, Stop Bits1, Flow ControlNone Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -7- IntelliTrac A1-lite Series User Guide (4) Choose [File][Properties] and click [ASCII Setup…] (5) Checked below ASCII Sending options Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -8- IntelliTrac A1-lite Series User Guide (4) Connect D-Sub connector to your PC and power on the device. The device startup message will be shown on the HyperTerminal. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -9- IntelliTrac A1-lite Series User Guide (5) Type ATI command and press [Enter] key, the hardware and firmware version will be shown on the HyperTerminal. If the HyperTerminal is shown like below, that means connection between the device and PC is working properly. It is ready to send all configuration commands from now on. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 10 - IntelliTrac A1-lite Series User Guide Communication Settings There are two communication modes for the IntelliTrac A series device to communicate to the control center. One is SMS, and the other is GPRS (TCP/UDP). The device should be set communication parameters before install the device to vehicle. (1) SMS Configuration Setting SMS control center phone number or short code by using AT$SMSDST command. For example, the SMS control center phone number is +886123456789, issue the AT$SMSDST command in HyperTerminal like below: AT$SMSDST=+886123456789 OK Then you can try to use cellular phone or SMS gateway to send a SMS message to the A1 device. Send a SMS message "AT$MODID?" Device will response: $MODID=101000001 OK (Type AT&W command to save all command parameters into the non-volatile memory of the device.) AT&W OK This proves the mobile phone SMS connects successfully. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 11 - IntelliTrac A1-lite Series User Guide (2) GPRS Configuration Setting GPRS server using the following commands: AT$APN=internet,username,password (APN=internet, Username=username, Password=password) OK AT$HOSTS=1,60.148.19.10 (Server IP address = 60.148.19.10) OK AT$RETRY=5,10 (Message retry settings) OK AT$IPTYPE=1 (Using TCP/IP mode) OK AT$PORT=6000 (Host application port) OK AT$GPRSEN=1 (GPRS enable) OK AT$HB=60 (Heartbeat setting) OK (Type AT&W command to save all command parameters into the non-volatile memory of the device.) AT&W OK Please refer to IntelliTrac A Series Protocol Document for detailed command descriptions. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 12 - IntelliTrac A1-lite Series User Guide GPS Tracking Configurations After the device communication settings are done. The remote GPS tracking function can be performed. The GPS tracking function can be set by using AT$PDSR command. For example, AT$PDSR=1,30,0,2,0,0,1,1 (Tracking through GPRS by time interval 30 seconds) OK For the simply testing GPRS, open the TCP Server A-Series software which is provided by S&T. It is a simple server software that can wait for device connection and data. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 13 - IntelliTrac A1-lite Series User Guide For advanced testing, open the IntelliTrac Tracer software and set communication port properly. The device will start to connect to the Tracer software and report GPS tracking locations. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 14 - IntelliTrac A1-lite Series User Guide Firmware Upgrade The IntelliTrac A Series device firmware is updated through the serial interface. The firmware update of the device can be performed with the IntelliTrac A series firmware loader tool provided by S&T. It runs on Windows based PCs. Please see the following step-by-step upgrade procedure. (1) Connect the RS232 cable between device an PC. (2) Turn on the device. (3) Run AseriesLoader.exe, the following window is displayed. (4) Click […] button to open firmware file which provide by S&T (5) Click Write button and start firmware programming. (6) When the writing progress 100% is reached, the device LEDs will start to fast blinking. (7) Wait until device LEDs stop fast blinking. (8) Firmware update complete. Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 15 - IntelliTrac A1-lite Series User Guide 2. Technical Specification for IntelliTrac A1-Lite CHARACTERISTICS Dimensions ( L x W x H) Weight Radio Performance Frequency (MHz) Transmit Power GSM Functionality / GPRS GPRS Mode GPRS Coding Scheme GSM Antenna SIM Interface GPS Functionality Receiver Sensitivity ( Tracking ) Antenna Type Connector GPS Protocol Onboard Components MCU Data Memory Motion Sensor Led Indicator 135 x 70 x 35mm(With Connector) 170gm Quad-Band 850/900/1800/1900MHz 1W/1800MHz,1900Mhz 2W/850MHz, 900MHz MultiSlot Class 10/B , Mobile Station Class B CS1,CS2,CS3 and CS4 Internal GSM Antenna Support SIM card 1.8V, 2.9V 12 Channels or above -159dBm External GPS Active Antenna , 3.3V SMA Female NMEA 0183 Ver3.0 32-bit Microcontroller 2MB flash 3-Axes Acceleration Sensor 3 , Green (Power status ) , Red ( GPS, GSM status ) Interface I/O I/O Connector 1Connectors. 4pin Serial Data I/O RS-232 (Default 57600bps) Inputs 2 Outputs 2 Electrical Power Source DC 8V to 30V Power Consumption 70mA @ 12V (Full power mode) 15mA @ 12V (Low power mode) 6mA @ 12V (Very low power mode) Environment Operating Temperature -20oC to +70oC Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 16 - IntelliTrac A1-lite Series User Guide 3. About Systems & Technology Corporation IntelliTrac A-Series AVL device is produced by Systems & Technology Corporation. The company is a key developer and supplier of advanced systems in the Automatic Vehicle Location (AVL), Digital Map and Car Navigation Systems. If you need information on other maps solutions or products, please contact us at the phone and fax numbers listed below, or visit our web sites. Contact Information for System & Technology Corp. S&T Web Site Technical Support Hotline Technical Support E-mail Main Phone Main Fax http://www.systech.com.tw +886-2-2698-1599 AVL@ms.systech.com.tw +886-2-2698-1599 +886-2-2698-1211 Systems & Technology Corp. © 2010 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 17 -
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-702 Producer : GPL Ghostscript 8.54 Keywords : Modify Date : 2010:06:03 10:06:33-04:00 Create Date : 2010:05:26 13:32:28+08:00 Creator Tool : PDFCreator Version 0.9.3 Metadata Date : 2010:06:03 10:06:33-04:00 Document ID : 9da88ae7-6ae3-11df-0000-95f823743b94 Instance ID : uuid:c4259da3-1341-4dc5-8d1f-1d954ee9aa42 Format : application/pdf Title : A1-LITE - User Guide -001 Creator : ben Description : Page Count : 21 Subject : Author : benEXIF Metadata provided by EXIF.tools