TAIDOC TECHNOLOGY H4000BEM2 Bluetooth Module User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1154906
Application ID	u6wOTccFrLk6S7kLXX+J/Q==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.71kB (233923 bits)
Date Submitted	2009-08-18 00:00:00
Date Available	2009-08-18 00:00:00
Creation Date	2009-06-12 12:22:47
Producing Software	AFPL Ghostscript 8.54
Document Lastmod	2009-06-16 10:15:31
Document Title	(Microsoft Word - user manual_\302\305\252\336\274\322\262\325\250\317\245\316\244\342\245U_\275d\250\322_Taidoc_.doc)
Document Creator	PScript5.dll Version 5.2
Document Author:	Hill_Chen

Manual
Version 1.1
Product:
BC4 Module
Model No. : H4000
Date:
June 12, 2009
H4000 Bluetooth Module
KEY FEATURES
Support SPP, HID, HSP,A2DP,AVRCP, BIP Profile..
Bluetooth 2.0+EDR
Power Level Class 2 (<4dBm)
High sensitivity -85dBm
Printing Antenna
APPLICATIONS
PDA and smart phone.
Digital frame with Bluetooth file transfer supporting.
GPS receiver.
Botebook PC and UMPC.
Picture
TOP VIEW
PHYSICAL SIZE 32mm X 14.5mm X 1.92mm
CONTENTS
1. Key fecture..………………………………………………………………………2
2. Applictions………………………………………………………………………...2
3. Picture…………………………………………..…………………………………..2
4. Dimension…………………………………….…………………………………….4
5. PCB footpoint……………………………….………..………………………...5
6. Diagram……………………………………..………………………………………7
7. Bundled Software……………………….………….………………………….7
8. Electrical Characteristics…………………………………………………..8
9. Contact Information…..…………………………………………………..10
10. Document History………………………………………………………….11
Hardware Pad Functions
9.82
7.28
Dimension
GND
VDD_PA
RESET
PIO2
AIO0
32mm
SPI_MISO
SPI_CSB
SPI_CLK
SPI_MOSI
H4000
TOP
VIEW
UART_CTS
PIO3
PIO4
PIO5
PIO6
PIO7
UART_TX
USB_D-
UART_RTS
USB_D+
UART_RX
1.27
AIO1
36
GND
PIO0
PIO1
GND
PCM_CLK
1V8OUT
PCM_IN
VDD
PCM_SYNC
GND
PCM_OUT
PIO11
PIO8
PIO9
PIO10
1.86
14.5mm
PCB Footprint
1.0
No. Symbol
I/O
GND
VDD_PA
GND
AIO(0)
AIO(1)
RESET
SPI_MISO
I/O
I/O
SPI_CSB
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
SPI_CLK
SPI_MOSI
UART_CTS
UART_TX
UART_RTS
UART_RX
1V8OUT
VDD
GND
PIO(11)
PIO(10)
PIO(9)
PIO(8)
PCM_OUT
PCM_SYNC
PCM_IN
PCM_CLK
I/O
I/O
I/O
I/O
I/O
I/O
26 USB_DP
I/O
27 USB_DN
28 PIO(7)
I/O
I/O
29 PIO(6)/WLAN_Active/Ch_Data
I/O
30 PIO(5)/BT_Active
I/O
31 PIO(4)/BT_Priority/Ch_Clk
I/O
32 PIO(3)
33 PIO(2)
34 PIO(1)/TXEN
I/O
I/O
I/O
Description
Ground
No connection
Ground
Programmable I/O line
Programmable I/O line
Reset if low
Synchronous serial interface data output
Chip select for Synchronous Serial Interface
active low
Synchronous serial interface clock
Synchronous serial interface data input
UART clear to send active low
UART data output
UART request to send active low
UART data input
1.8V output voltage
3.3V input voltage
Ground
Programmable I/O line
Programmable I/O line
Programmable I/O line
Programmable I/O line
Synchronous data out
Synchronous data sync
Synchronous data input
Synchronous data clock
USB data plus with selectable internal 1.5k
pull-up resistor
USB data minus
Programmable I/O line
Programmable I/O line or
Optionally WLAN_Acitve/Ch_Data input for
co-existence signaling
Programmable I/O line or
Optionally BT_Acitve output for
co-existence signaling
Programmable I/O line or
Optionally BT_Priority/Ch_Clk output for
co-existence signaling
Programmable I/O line
Programmable I/O line
Programmable I/O line or Control output for
Ω
35 PIO(0)/RXEN
36 GND
external PA (if fitted)
Programmable I/O line or Control output for
I/O
external LNA (if fitted)
- Ground
Hardware Block Diagram
Frequency range :
2.400GHz ~ 2.480GHz
Flash
8M bit
Main chip
CSR
BC417
Balun
Crystal
16MHz
Bundled Software
Bluepacket FW 43.TDR11.403, support SPP-B profile .
Electrical Characteristics
Absolute Maximum Ratings
Rating
Min
Max
Storage temperature
-40 C
+90 oC
Supply Voltage
-0.4V
3.7V
Recommended Operating Conditions
Operating Condition
Min
Max
Operating temperature range
-0oC
+70 oC
Guaranteed RF performance range
-40 oC
+105 oC
Supply voltage
3.0V
3.6V
RF Transmitter
RF Receiver
Contact Information
Bluepacket Communications Co., Ltd.
5F.-2,No.12,Lane 270,Sec.3,Beishen Rd.,Shenkeng
Township,Taipei County 222, Taiwan (R.O.C )
TEL 886-2-26649168
FAX 886-2-26649166
Document History
Date
Revision
Reason of change
November 22,
2005
V1.0
Original publication
June 12, 2009
V1.1
Modify
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including
interference that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Note: The end product shall has the words
“Contains Transmitter Module FCC ID: _________________________
TM7H4000BEM2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2009:06:12 12:22:47Z
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:06:16 10:15:31+08:00
Metadata Date                   : 2009:06:16 10:15:31+08:00
Format                          : application/pdf
Creator                         : Hill_Chen
Title                           : (Microsoft Word - user manual_\302\305\252\336\274\322\262\325\250\317\245\316\244\342\245U_\275d\250\322_Taidoc_.doc)
Producer                        : AFPL Ghostscript 8.54
Document ID                     : uuid:ef638337-b5db-4b7e-ab84-c02240c88884
Instance ID                     : uuid:f45f9334-a690-43dc-b89b-c943442f2686
Has XFA                         : No
Page Count                      : 13
Author                          : Hill_Chen

EXIF Metadata provided by EXIF.tools