TAIYO YUDEN EYBMABA Complete Class2 Bluetooth Module User Manual

Taiyo Yuden Co., Ltd. Complete Class2 Bluetooth Module

user manual

Download: TAIYO YUDEN EYBMABA Complete Class2 Bluetooth Module User Manual
Mirror Download [FCC.gov]TAIYO YUDEN EYBMABA Complete Class2 Bluetooth Module User Manual
Document ID879525
Application IDs58Digb+CvGRoZ5tktl/Vw==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize56.68kB (708499 bits)
Date Submitted2007-12-14 00:00:00
Date Available2007-12-14 00:00:00
Creation Date2007-11-16 15:23:28
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2007-12-05 16:03:50
Document Titleuntitled

16-Nov.-2007
EYBMABA
Ver.0.1
TAIYO YUDEN Confidential
& Tentative
Bluetooth® Module
EYBMABA (RF+Baseband (Class 2) UART)
User’s Manual
Please note that this users manual should not be provided to end-users.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks
by TAIYO YUDEN CO., LTD. is under license.
TAIYO YUDEN
1/2
Document constituent list
Control name
Absolute maximum ratings
Electrical characteristics
Electrical characteristics
Electrical characteristics
Electrical characteristics
Outline / Appearance
Outline / Appearance
Pin Layout
Control No.
HD-AG-A071044
HD-AE-A071044
HD-AE-B071044
HD-AE-C071044
HD-AE-D071044
HD-AD-A071044
HD-AD-B071044
HD-BA-A071044
Document Page
1/1
1/4- 4/4
1/1
1/11 - 11/11
1/9- 9/9
1/1
1/3- 3/3
1/2- 2/2
Rev. record
Nov.16. 2007> Ver.0.1
TAIYO YUDEN
2/2
Control No.
Control name
ＨＤ－ＡＭ－
Ａ０７１０４４
（1／1）
APPROVED
CHECKED
DRAWN
Absolute maximum ratings
絶対最大定格書
１．Maximum rating
Item
Supply voltage
Input voltage
Symbol
MIN
VDD
Vin
TYP
MAX
Unit
-0.3
3.6
-0.3
VDD+0.3
Condition
Ta=25℃，GND reference
２．Recommendation operating range
Item
Operating
supply voltage
Supply voltage
ripple and spike
noise
Operating
temperature range
Storage
temperature range
Symbol
MIN
TYP
MAX
Unit
VDD
3.0
3.30
3.6
(30)
mV/p-p
VDD_rn
DESIGNED
2007.
11.16
Condition
Note3)
Topr
25
70
℃
Humidity =40%RH Note1）
Tstg
-30
25
85
℃
Humidity =40%RH Note2）
Note1) Operating temperature range is set to satisfy products electrical characteristics in the short term.
In terms of product life cycle when it is used in condition of varying from TYP standard in the long term,
please refer to the reliability condition.
動作温度範囲は短期的に製品の電気的特性を満足する温度範囲です。
TYP 規格から大きく外れた条件で、長期ご使用の場合の製品寿命につきましては信頼性条件を
ご参照願います。
Note2) Storage temperature range is the condition for transportation and storage in temporary.
Please keep it under condition of “reference data” (HQ-BA-***) for long-term storage.
保存温度範囲は、輸送時や短期間の保管時の条件です。
長期保管時は、取扱注意要領の条件に従って保管して下さい。
Note3) The Max. is a reference value. The value may change depending on the evaluation.
Max.値は参考値となります。今後の検証によって変更になる可能性があります。
TAIYO YUDEN Co., Ltd.
Control No.
Control name
APPROVED
CHECKED
DRAWN
Electrical characteristics (Digital)
ＨＤ－ＡＥ－
Ａ０７１０４４
（1／4）
DESIGNED
2007.
11.16
電気的特性書 (Digital)
Electrical characteristics
DC Specifications
The Specification applies for Topr=25 degrees C, VDD=3.3V
No.
Parameter
Condition
Normal supply voltage
/RESET,
VREG_CTL,
UART_RX,
UART_CTS
/RESET,
VREG_CTL,
UART_RX,
UART_CTS
UART_TX,
UART_RTS
UART_TX,
UART_RTS
Symbol
Min
Typ
Max
Unit
Remark
VDD
3.0
3.3
3.6
VIL
0.8
VIH
2.0
VDD
VOL
0.4
Iout =-2mA
VOH
VDD-0.4
Iout=-2mA
(180)
mA
Note 4
Input low voltage
Input High voltage
Output low voltage
Output High voltage
Peak current
Continuous Rx
Iccp
(60)
Average current 1
Sniff mode
(Slave only)
Icca1
TBD
mA
Notes 1,3
Average current 2
Standby mode
Icca2
(13)
mA
Notes 3, 4
Average current 3
Icca3
TBD
mA
Note 3
Icca4
TBD
mA
Note 3
Icca5
TBD
mA
Note 3
Icca6
TBD
mA
Notes 2,3
Icca7
Icca8
(8)
(0.4)
mA
mA
Note 4
Note 4
10 Average current 4
11 Average current 5
12 Average current 6
13 Average current 7
14 Average current 8
Send DM1packet
(Master)
Receive DM1packet
(Slave)
Hold mode
(Slave only)
Park mode
(Slave only)
/Reset
VREG_CTL OFF
Notes:
1. Sniff mode parameter.
Max interval
Min interval
Attempt
Timeout
0050h
0010h
0005h
0005h
2. Park mode parameter.
Max interval 0100h
Min interval 0010h
3. The consumption current might fluctuate with the condition of radio communication, host performance and test circuit.
4. The Typ. is a reference value. The value may change depending on the evaluation.
3. 消費電流は、通信状況、HOST パフォーマンス、検査回路によって変動する可能性があります。
4. Typ.値は参考値となります。今後の検証によって変更になる可能性があります。
TAIYO YUDEN Co., Ltd.
Control No.
Control name
ＨＤ－ＡＥ－
Ａ０７１０４４
（2／4）
APPROVED
CHECKED
DRAWN
Electrical characteristics (Digital)
DESIGNED
2007.
11.16
電気的特性書 (Digital)
AC Specifications
The Specification applies for Topr=25 degrees C, VDD=3.3V
No.
Parameter
Condition
Symbol
Min
Typ
Max
Unit
(2)
ms
VDD Rise Time from 0V to 3.0V
t1
VDD=3.0V to VREG_CTL High
t2
ms
VREG_CTL= 3.0V to /RESET High
t3
ms
/RESET High to Module Ready
t4
/RESET High to /RESET Low
t5
/RESET Pulse Width
t6
VREG_CTL Pulse Width
t7
VREG_CTL High to Module Ready
t8
/RESET Low to VDD Off
t9
ms
10 VREG_CTL Low to VDD Off
t10
ms
(2600)
ms
TBD
1. 値は、firmware version によって変更する可能性があります。
2. Typ.値は参考値となります。今後の検証によって変更になる可能性があります。
TAIYO YUDEN Co., Ltd.
Notes 1, 2
us
ms
(2600)
1. It may change due to the firmware version.
2. The Typ. is a reference value. The value may change depending on the evaluation.
Note 2
ms
Notes:
Remark
ms
Notes 1, 2
Control No.
Control name
ＨＤ－ＡＥ－
Ａ０７１０４４
（3／4）
APPROVED
CHECKED
Electrical characteristics (Digital)
DRAWN
DESIGNED
2007.
11.16
電気的特性書 (Digital)
t1
90%
VDD
10%
t2
VIH
VIH
VREG_CTL
t7
t3
VIL
t5
VIH
VIH
VIL
VIL
/RESET
t4
UART_I/F
VIL
t6
Active
t8
t4
Active
Timing Diagram for Power Up Sequence
TAIYO YUDEN Co., Ltd.
Active
Control No.
Control name
ＨＤ－ＡＥ－
Ａ０７１０４４
（4／4）
APPROVED
CHECKED
DRAWN
Electrical characteristics (Digital)
電気的特性書 (Digital)
UART Interface
AC Specifications
The Specification applies for Topr.= 25 degrees C, VDD=3.3V
No.
Symbol
Min
RTS Low to RX Data On
Parameter
Condition
t1
RTS High to RX Data Off
t2
CTS Low to TX Data On
t3
CTS High to TX Data Off
t4
CTS High Pulse Width
t5
Typ
UART_RX
t5
UART_CTS
t4
t3
UART_TX
Stop bit
10 bits
Timing Diagram for UART signals

Item
Parameter
Baud Rate
Date Bits
Stop Bits
Parity
Flow Control
115.2kbps (Typ.)
8bits
1bit
None
CTS/RTS
Note:
TAIYO YUDEN Co., Ltd.
byte
us
Unit
Remark
ms
t2
Start bit
Max
UART_RTS
t1
DESIGNED
2007.
11.16
byte
bit
Firmware
controlled.
Control No.
Control name
ＨＤ－ＡＥ－
Ｂ０７１０４４
（1／1）
APPROVED
CHECKED
DRAWN
Electrical characteristics (RF)
電気的特性書 (RF)
Electrical characteristics
The Specification applies for Topr = 0to +70℃, VDD=3.00 to 3.60V
RF Specifications
No
Parameter
Frequency
Initial Frequency
Tolerance
Output Power
Modulation
Characteristics
Sensitivity
Symbol
Spec
Min
Typ
2402
IFT
Max
DESIGNED
2007.
11.16
Unit
Remark
2480
MHz
0～78ch(1MHz step)
-48
48
kHz
DH5
-3.5
2.5
dBm
Ta=25±2℃
@Max Power
-6
dBm
@Max Power
MC1
140
160
175
kHz
Payload: 11110000 average
MC4
115
160
kHz
Payload: 10101010 average
POW
-83
-75
dBm
BER<0.1%、Ta=25±2℃
-80
-70
dBm
BER<0.1%
SEN
Note:
RF output is suspended within TBD after /RESET Active.
通信中に /RESET Active となった場合、RF 出力は TBD 以下で停止します。
TAIYO YUDEN Co., Ltd.
Control No.
ＨＤ－ＡＥ－
Ｃ０７１０４４
（1／11）
Control name
Electrical characteristics (Software A)
電気的特性書
APPROVED
CHECKED
DRAWN
DESIGNED
2007.
11.16
(Software A)
Supported HCI Commands / HCI Events
The Bluetooth® functions of this module are as written in the attached PICS. Depending on firmware
version Upgrade, the Bluetooth® functions are subject to change without notice.
本ﾓｼﾞｭｰﾙの Bluetooth 機能が PICS に記載されています。Bluetooth 機能はﾌｧｰﾑｳｪｱﾊﾞｰｼﾞｮﾝに応じて
予告なしで変更されます。
HCI COMMAND LIST
Command Description
Group
Command
(Hex)
(Hex)
Parameters
OpCode
Returns
Status
Notes
Yes
Status
Yes
Status
Yes
Status
Yes
LINK CONTROL
Inquiry
HCI _Inquiry
0x0401
HCI _ Inquiry_ Cancel
0x0402
HCI_ Periodic_ Inquiry _Mode
0x0403
HCI _Exit _Periodic _Inquiry
_Mode
0x0404
LAP
Inquiry Length
Num Responses
Max Period Length
Min Period Length
LAP
Inquiry Length
Num Responses
Connection Management
HCI _Create_ Connection
0x0405
HCI _Disconnect
0x0406
HCI _Create _Connection _Cancel
0x0408
HCI _Accept _Connection _Request
0x0409
HCI _Reject _Connection _Request
0x040A
HCI _Change _Connection
_Packet_Type
0x040F
HCI _Setup _Synchronous
_Connection
0x0428
28
HCI _Accept _Synchronous
_Connection _Request
0x0429
29
HCI _Reject _Synchronous
_Connection _Request
0x042A
2A
BD ADDR
Packet Type
Page Scan Repetition Mode
Reserved
Clock Offset
Allow Role Switch
Connection Handle
Reason
Packet Type
BD ADDR
BD ADDR
Role
BD ADDR
Reason
Connection Handle
Packet Type
Connection Handle
Transmit Bandwidth
Receive Bandwidth
Max Latency
Voice Setting
Retransmission Effort
Packet Type
BD ADDR
Transmit Bandwidth
Receive Bandwidth
Max Latency
Content Format
Retransmission Effort
Packet Type
BD ADDR
Reason
TAIYO YUDEN Co.,Ltd.
Yes
Yes
Status
BD ADDR
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Control No.
ＨＤ－ＡＥ－
Ｃ０７１０４４
（2／11）
Control name
Electrical characteristics (Software A)
電気的特性書
APPROVED
CHECKED
DRAWN
2007.
11.16
(Software A)
Authentication / Pairing
HCI _Link _Key _Request _Reply
0x040B
BD ADDR
Link Key
HCI _Link _Key _Request
_Negative _Reply
0x040C
BD ADDR
HCI _PIN _Code _Request _Reply
0x040D
BD ADDR
PIN Code Length
PIN Code
0x040E
BD ADDR
0x0411
11
Connection Handle
Yes
0x0415
15
Connection Handle
Yes
0x0413
13
0x0417
17
HCI _PIN _Code _Request
_Negative _Reply
HCI _Authentication _Requested
HCI _Change _Connection _Link
_Key
Status
BD ADDR
Status
BD ADDR
Status
BD ADDR
Status
BD ADDR
Yes
Yes
Yes
Yes
Encryption
HCI _Set _Connection
_Encryption
HCI _Master _Link _Key
Connection Handle
Encryption Enable
Key Flag
Yes
Yes
Remote Information
HCI _Remote _Name_ Request
HCI _Remote _Name _Request
_Cancel
HCI _Read _Remote _Supported
_Features
HCI _Read _Remote _Extended
_Features
HCI _Read _Remote _Version
_Information
HCI _Read _Clock _Offset
HCI _Read _LMP _Handle
0x0419
19
BD ADDR
Page Scan Repetition Mode
Reserved
Clock Offset
0x041A
1A
BD ADDR
0x041B
1B
Connection Handle
Yes
0x041C
1C
Connection Handle
Page Number
Yes
0x041D
1D
Connection Handle
Yes
0x041F
1F
Connection Handle
0x0420
20
Connection Handle
TAIYO YUDEN Co.,Ltd.
DESIGNED
Yes
Status
BD ADDR
Yes
Yes
Status
Connection Handle
LMP Handle
Reserved
Yes
Control No.
ＨＤ－ＡＥ－
Ｃ０７１０４４
（3／11）
Control name
Electrical characteristics (Software A)
電気的特性書
APPROVED
CHECKED
DRAWN
DESIGNED
2007.
11.16
(Software A)
LINK POLICY
Connection Handle
Hold Mode Max Interval
Hold Mode Min Internal
Connection Handle
Sniff Max Interval
Sniff Min Interval
Sniff Attempt
Sniff Timeout
Connection Handle
Connection Handle
Beacon Max Interval
Beacon Min Interval
Connection Handle
Connection Handle
Flags
Service Type
Token Rate
Peak Bandwidth
Latency
Delay Variation
HCI _Hold _Mode
0x0801
HCI _Sniff _Mode
0x0803
HCI _Exit _Sniff _Mode
0x0804
HCI _Park _State
0x0805
HCI _Exit _Park _State
0x0806
HCI _QoS _Setup
0x0807
HCI _Role _Discovery
0x0809
Connection Handle
HCI _Switch _Role
0x080B
BD ADDR
Role
HCI _Read _Link _Policy
_Settings
0x080C
Connection Handle
HCI _Write _Link _Policy
_Settings
0x080D
Connection Handle
Link Policy settings
HCI _Read _Default _Link _Policy
_Settings
0x080E
HCI _Write _Default _Link
_Policy_Settings
0x080F
HCI _Flow _Specification
0x0810
10
Default Link Policy
Settings
Connection Handle
Flags
Flow direction
Service Type
Token Rate
Token Bucket Size
Peak Bandwidth
Access Latency
TAIYO YUDEN Co.,Ltd.
Yes
Yes
Yes
Yes
Yes
Yes
Status
Connection Handle
Current Role
Yes
Yes
States
Connection Handle
Link Policy Settings
States
Connection Handle
Status
Default Link Policy
Settings
Yes
Status
Yes
Yes
Yes
Yes
Control No.
ＨＤ－ＡＥ－
Ｃ０７１０４４
（4／11）
Control name
Electrical characteristics (Software A)
電気的特性書
APPROVED
CHECKED
DRAWN
DESIGNED
2007.
11.16
(Software A)
HOST CONTROLLER & BASEBAND
HCI _Set _Event _Mask
HCI _Reset
0x0C01
0x0C03
Event Mask
HCI _Set _Event _Filter
0x0C05
Filter Type
Filter Condition Type
Condition
HCI _Flush
0x0C08
Connection Handle
HCI _Read _PIN _Type
0x0C09
HCI _Write _PIN _Type
HCI _Create _New _Unit _Key
0x0C0A
0x0C0B
PIN Type
BD ADDR
HCI _Read _Stored _Link _Key
0x0C0D
HCI _Write _Stored _Link _Key
0x0C11
11
HCI _Delete _Stored _Link _Key
0x0C12
12
HCI _Write _Local _Name
0x0C13
13
HCI _Read _Local _Name
0x0C14
14
0x0C15
15
0x0C16
16
HCI _Read _Page _Timeout
0x0C17
17
HCI _Write _Page _Timeout
0x0C18
18
HCI _Read _Scan _Enable
0x0C19
19
HCI _Write _Scan _Enable
0x0C1A
1A
HCI _Read _Page _Scan
_Activity
0x0C1B
1B
HCI _Write _Page _Scan
_Activity
0x0C1C
1C
HCI _Read _Inquiry _Scan
_Activity
0x0C1D
1D
0x0C1E
1E
0x0C1F
1F
0x0C20
20
HCI _Read _Encryption _Mode
0x0C21
21
HCI _Write _Encryption _Mode
0x0C22
22
HCI _Read _Class _of _Device
0x0C23
23
HCI _Write _Class _of _Device
0x0C24
24
HCI _Read _Voice _Setting
0x0C25
25
HCI _Write _Voice _Setting
0x0C26
26
HCI _Read _Connection _Accept
_Timeout
HCI _Write _Connection _Accept
_Timeout
HCI _Write _Inquiry _Scan
_Activity
HCI _Read _Authentication
_Enable
HCI _Write _Authentication
_Enable
Read All Flag
Num Keys To Write
BD ADDR [I]
Link Key [I]
BD ADDR
Delete All Flag
Local Name
Conn Accept Timeout
Page Timeout
Scan Enable
Page Scan Interval
Page Scan Window
Inquiry Scan Interval
Inquiry Scan Window
Authentication Enable
Encryption Mode
Class of Device
Voice setting
TAIYO YUDEN Co.,Ltd.
States
States
Yes
Yes
States
Yes
States
Connection Handle
States
PIN Type
States
States
States
Max Num Keys
Num Keys Read
States
Num Keys Written
States
Num Keys Deleted
States
States
Local Name
States
Conn Accept Timeout
States
States
Page Timeout
States
States
Scan Enable
States
States
Page Scan Interval
Page Scan Window
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
States
Yes
States
Inquiry Scan Interval
Inquiry Scan Window
Yes
States
Yes
States
Authentication Enable
Yes
States
Yes
States
Encryption Mode
States
States
Class of Device
States
States
Voice Setting
States
Yes
Yes
Yes
Yes
Yes
Yes
Control No.
ＨＤ－ＡＥ－
Ｃ０７１０４４
（5／11）
Control name
Electrical characteristics (Software A)
電気的特性書
0x0C27
27
Connection Handle
HCI _Write _Automatic _Flush_
Timeout
0x0C28
28
Connection Handle
Flash Timeout
HCI _Read _Num _Broadcast_
Retransmission
0x0C29
29
0x0C2A
2A
0x0C2B
2B
0x0C2C
2C
HCI _Read _Transmit _Power
_Level
0x0C2D
2D
HCI _Read _Synchronous _Flow
_Control _Enable
0x0C2E
2E
0x0C2F
2F
Synchronous Flow
Control Enable
0x0C31
31
Flow Control Enable
HCI _Write _ Synchronous _Flow
_Control _Enable
HCI _Set _Controller _To _Host
_Flow _Control
HCI _Host _Buffer _Size
0x0C33
33
HCI _Host _Number _Of
_Completed _Packets
0x0C35
35
HCI _Read _Link _Supervision
_Timeout
Num Broadcast
Retransmission
DESIGNED
2007.
11.16
States
Connection Handle
Flush Timeout
States
Connection Handle
States
Num
Broadcast
Retransmissions
Yes
Yes
Yes
Yes
States
Hold Mode Activity
Yes
Hold Mode Activity
States
Yes
Connection Handle
States
Connection Handle
Transmit Power Level
States
Synchronous Flow
Control Enable
Type
Host ACL Data Packet
Length
Host Synchronous Data
Packet
Length
Host Total Num ACL Data
Packets
Host
Total
Num
Synchronous Data
Packets
Number of Handles
Connection Handle [I]
Host Num of Completed
Packets [I]
36
Connection Handle
0x0C37
37
Connection Handle
Link Supervision Timeout
0x0C38
38
HCI _Read _Current _IAC _LAP
0x0C39
39
HCI _Write _Current _IAC _LAP
0x0C3A
3A
0x0C3B
3B
0x0C3C
3C
0x0C3F
3F
HCI _Read _Page _Scan _Period
_Mode
HCI _Write _Page _Scan _Period
_Mode
Set _AFH _Host _Channel
_Classification
DRAWN
States
0x0C36
HCI _Write _Link _Supervision
_Timeout
HCI _Read _Number _Of
_Support_IAC
CHECKED
(Software A)
HCI _Read _Automatic _Flush
_Timeout
HCI _Write _Num _Broadcast_
Retransmission
HCI _Read _Hold _Mode
_Activity
HCI _Write _Hold _Mode
_Activity
APPROVED
Num Current IAC
IAC LAP [I]
Yes
Yes
States
No
States
No
States
Yes
Yes
States
Connection Handle
Link Supervision
Timeout
States
Connection Handle
States
Num Support IAC
States
Num Current IAC
IAC LAP [I]
Yes
Yes
Yes
Yes
States
Yes
States
Page Scan Period Mode
Yes
Page Scan Period Mode
States
No
AFH Host Channel
Classification
Status
Yes
TAIYO YUDEN Co.,Ltd.
Control No.
ＨＤ－ＡＥ－
Ｃ０７１０４４
（6／11）
Control name
Electrical characteristics (Software A)
電気的特性書
HCI _Read _Inquiry _Scan _Type
0x0C42
42
HCI _Write _Inquiry _Scan _Type
0x0C43
43
HCI _Read _Inquiry _Mode
0x0C44
44
HCI _Write _Inquiry _Mode
0x0C45
45
HCI _Read _Page _Scan _Type
0x0C46
46
HCI _Write _Page _Scan _Type
0x0C47
47
HCI Read _AFH _Channel
_Assessment _Mode
0x0C48
48
HCI Write _AFH _Channel
_Assessment _Mode
0x0C49
49
APPROVED
CHECKED
DRAWN
2007.
11.16
(Software A)
Scan Type
Inquiry Mode
Page Scan Type
AFH Channel
Assessment Mode
Status
Scan Type
Status
Status
Inquiry Mode
Status
Status
Page Scan Type
Status
Status
AFH Channel
Assessment Mode
Status
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
INFORMATIONAL PARAMETERS
HCI _Read _Local _Version _
Information
0x1001
0x1002
0x1003
HCI _Read _Local _Extended
_Features
0x1004
HCI _Read _Buffer _Size
0x1005
HCI _Read _BD _ADDR
0x1009
HCI _Read _Local _Supported
_Commands
HCI _Read _Local _Supported
_Features
Page number
TAIYO YUDEN Co.,Ltd.
DESIGNED
Status
HCI Version
HCI Revision
LMP Version
Manufacturer Name
LMP Subversion
Status
Supported Commands
Status
LMP Features
Status
Page number
Maximum Page Number
Extended LMP Features
Status
HC ACL Data Packet
Length
HC Synchronous Data
Packet Length
HC Total Num ACL
Data Packets
HC Total Num
Synchronous
Data
Packets
Status
BD ADDR
Yes
Yes
Yes
Yes
Yes
Yes
Control No.
ＨＤ－ＡＥ－
Ｃ０７１０４４
（7／11）
Control name
Electrical characteristics (Software A)
電気的特性書
APPROVED
CHECKED
DRAWN
DESIGNED
2007.
11.16
(Software A)
STAUS PARAMETERS
HCI _Read _Failed _Contact
_Counter
0x1401
Connection Handle
HCI _Reset _Failed _Contact
_Counter
0x1402
Connection Handle
HCI _Read _Link _Quality
0x1403
Connection Handle
HCI _Read _RSSI
0x1405
Connection Handle
HCI _Read _AFH _Channel _Map
0x1406
Connection Handle
HCI _Read _Clock
0x1407
Connection Handle
Which Clock
Status
Connection Handle
Failed Contact Counter
Status
Connection Handle
Status
Connection Handle
Link Quality
Status
Connection Handle
RSSI
Status
Connection Handle
AFH Mode
AFH Channel Map
Status
Connection Handle
Clock
Accuracy
Yes
Yes
No
Yes
Yes
Yes
TESTING
HCI _Read _Loopback _Mode
0x1801
HCI _Write _Loopback _Mode
0x1802
HCI _Enable _Device _Under
_Test_Mode
0x1803
Loopback Mode
States
Loopback Mode
Yes
States
Yes
States
Yes
Notes:
a) Note that for testing purposes, this command may be issued with an Inquiry Length of 0 to program an infinite inquiry length.
b) Does not cancel an inquiry that resulted from a periodic inquiry command.
c) The packet type field has been expanded for EDR support. It is totally compatible to 2.0+EDR and earlier specifications.
d) Can support up to 3 links of SCO or eSCO or a combination of SCO + eSCO.
e) Firmware will try to ensure the throughput is guaranteed by deducing a correlated Tpoll value from the Token Rate parameter together
with the packet type that is enabled at the time this command is issued. Once a desirable token rate is deduced, the firmware will send
LMP_QUALITY_OF_SERVICE_REQ_PDU to the remote device. If the remote device accepts the Tpoll, the firmware will send a
QoS_SETUP_COMPLETE event to the host.
When the firmware receives a LMP_QUALITY_OF_SERVICE_REQ_PDU, it will send accept as long as the Tpoll is larger than 2
slots in single connection scenario, or Tpoll is larger than 4 slots in a multiple connection scenario.
f) Currently only support symmetric flow specification. Asymmetric flow specification support will be available in B0 and after products.
g) BD_ADDR filter condition is not supported.
h) Does not support local unit key since unit key is less secure, but will accept if peer sends unit key.
i) No Link Key database.
j) Note that for testing purposes, a Page Timeout of 0 can be issued to denote an infinite Page Timeout value.
k) The requested transmit power returned as a signed char in the range of 0 to –28 in 4 dBm steps.
l) Called HCI_READ_SCO_FLOW_CONTROL_ENABLE in and earlier specs.
m) Called HCI_WRITE_SCO_FLOW_CONTROL_ENABLE in and earlier specs.
n) ACL only.
o) Only master role will take effect.
p) Current golden range is –52 to – 72 dBm. Note that this command will return the RSSI associated with the last received packet.
TAIYO YUDEN Co.,Ltd.
Control No.
ＨＤ－ＡＥ－
Ｃ０７１０４４
（8／11）
Control name
Electrical characteristics (Software A)
電気的特性書
APPROVED
CHECKED
DRAWN
DESIGNED
2007.
11.16
(Software A)
a) ﾃｽﾄ目的で、無限の Inquiry Length ﾌﾟﾛｸﾞﾗﾑのため Inquiry Length=0 で発行することができる。
b) Periodic Inquiry ｺﾏﾝﾄﾞはｷｬﾝｾﾙしません。
c) EDR ｻﾎﾟｰﾄのためﾊﾟｹｯﾄﾀｲﾌﾟﾌｨｰﾙﾄﾞを広げています。それは 2.0+EDR と以前の仕様と完全互換性があります。
d) SCO か eSCO は最大 3 個のﾘﾝｸ、または SCO+eSCO の組み合わせをｻﾎﾟｰﾄすることができます。
e) このｺﾏﾝﾄﾞを発行するときに有効にするﾊﾟｹｯﾄﾀｲﾌﾟと共に、Token Rate ﾊﾟﾗﾒｰﾀから関連する Tpoll 値を推論することにより、
ﾌｧｰﾑｳｪｱはｽﾙｰﾌﾟｯﾄが保証されるのを確実にしようとする。
望ましい Token Rate がいったん推論されると、ﾌｧｰﾑｳｪｱは LMP_QUALITY_OF_SERVICE_REQ_PDU をﾘﾓｰﾄﾃﾞﾊﾞｲｽに送る。
もしﾘﾓｰﾄﾃﾞﾊﾞｲｽが Tpoll を受け入れると、ﾌｧｰﾑｳｪｱは Qos_SETUP_COMPLETE ｲﾍﾞﾝﾄを HOST へ送る。
ﾌｧｰﾑｳｪｱは LMP_QUALITY_OF_SERVICE_RQE_PDU を受けるとき、ｼﾝｸﾞﾙ接続での 2 ｽﾛｯﾄより Tpoll が大きければ、または
複数接続での 4 ｽﾛｯﾄより Tpoll が大きいなら ACCEPT を送る。
f) 現在 Symmetric Flow のみｻﾎﾟｰﾄしています。Asymmetric Flow は B0 と以降の製品で利用可能になる。
g) BD_ADDR ﾌｨﾙﾀｺﾝﾃﾞｨｼｮﾝはｻﾎﾟｰﾄされません。
h) Unit key が安全でないので Local unit key をｻﾎﾟｰﾄしていないが、相手が Unit key を送ると受け入れる。
i) ﾘﾝｸｷｰﾃﾞｰﾀﾍﾞｰｽはありません。
j) ﾃｽﾄ用に無限の Page Timeout 値を指定するために Page Timeout=0 を発行することができます。
k) 送信ﾊﾟﾜｰ要求の戻り値は signed char 型の 0～-28 範囲で 4dBm ｽﾃｯﾌﾟです。
l) 以前の仕様では HCI_READ_SCO_FLOW_CONTROL_ENABLE でした。
m) 以前の仕様では HCI_WRITE_SCO_FLOW_CONTROL_ENABLE でした。
n) ACL だけです。
o) ﾏｽﾀｰだけ効果あります。
p) 現在の Golden Range は-52 から-72dBm です。このｺﾏﾝﾄﾞは最後の受信ﾊﾟｹｯﾄの関連した RSSI を返すでしょう。
TAIYO YUDEN Co.,Ltd.
Control No.
ＨＤ－ＡＥ－
Ｃ０７１０４４
（9／11）
Control name
Electrical characteristics (Software A)
電気的特性書
APPROVED
CHECKED
DRAWN
2007.
11.16
(Software A)
HCI EVENT LIST
Event Description
OpCode
Parameters
Inquiry _Complete
0x01
Inquiry _Result
0x02
Inquiry _Result _with _RSSI
0x22
Status
Num Responses
BD ADDR [I]
Page Scan Repetition Mode [I]
Reserved[I]
Reserved[I]
Class of Device [I]
Clock Offset [I]
Num responses
BD ADDR [I]
Page Scan Repetition Mode [I]
Reserved [I]
Class of Device [I]
Clock Offset [I]
RSSI [I]
Status
Notes
Inquiry
Yes
Yes
Yes
Connection Management
Connection _Complete
0x03
Connection _Request
0x04
Disconnection _Complete
0x05
Synchronous _Connection _Complete
0x2C
Synchronous _Connection _Changed
0x2D
Status
Connection Handle
BD ADDR
Link Type
Encryption Mode
BD ADDR
Class of Device
Link Type
Status
Connection Handle
Reason
Status
Connection Handle
BD ADDR
Link Type
Transmission Interval
Retransmission Window
Rx Packet Length
Tx Packet Length
Air Mode
Status
Connection Handle
Transmission Interval
Retransmission Window
Rx Packet Length
Tx Packet Length
Yes
Yes
Yes
Yes
Yes
Authentication / Pairing
Authentication _Complete
0x06
Return _Link _Keys
0x15
PIN _Code _Request
Link _Key _Request
0x16
0x17
Link _Key _Notification
0x18
Status
Connection Handle
Num Keys
BD ADDR [I]
Link Key [I]
BD ADDR
BD ADDR
BD ADDR
Link Key
Key Type
TAIYO YUDEN Co.,Ltd.
DESIGNED
Yes
No
Yes
Yes
Yes
Control No.
ＨＤ－ＡＥ－
Ｃ０７１０４４
（10／11）
Control name
Electrical characteristics (Software A)
電気的特性書
APPROVED
CHECKED
Encryption
0x08
Change _Connection _Link _Key _Complete
0x09
Master _Link _Key _Complete
0x0A
Status
Connection Handle
Encryption Enable
Status
Connection Handle
Status
Connection Handle
Key Flag
Yes
Yes
Yes
Remote Information
Remote _Name _Request _Complete
0x07
Read _Remote _Supported _Features _Complete
0x0B
Read _Remote _Version _Information _Complete
0x0C
Read _Remote _Extended _Features _Complete
0x23
Status
BD ADDR
Remote Name
Status
Connection Handle
LMP Features
Status
Connection Handle
LMP Version
Manufacture Name
LMP Subversion
Status
Connection Handle
Page Number
Maximum page number
Extended LMP Features
Yes
Yes
Yes
Yes
Link Policy
QoS _Setup _Complete
0x0D
Role _Change
0x12
Mode _Change
0x14
Flow _Specification _Complete
0x21
Status
Connection Handle
Flags
Service Type
Token Rate
Peak Bandwidth
Latency
Delay Variation
Status
BD ADDR
New Role
Status
Connection Handle
Current Mode
Interval
Status
Connection Handle
Flags
Flow direction
Service Type
Token Rate
Token Bucket Size
Peak Bandwidth
Access Latency
TAIYO YUDEN Co.,Ltd.
DESIGNED
2007.
11.16
(Software A)
Encryption _Change
DRAWN
Yes
Yes
Yes
Yes
Control No.
ＨＤ－ＡＥ－
Ｃ０７１０４４
（11／11）
Control name
Electrical characteristics (Software A)
電気的特性書
APPROVED
CHECKED
DRAWN
DESIGNED
2007.
11.16
(Software A)
General
Command _Complete
0x0E
Command _Status
0x0F
Hardware _Error
0x10
Number _Of _Completed _Packets
0x13
Data _Buffer _Overflow
0x1A
Max _Slots _Change
0x1B
Read _Clock _Offset _Complete
0x1C
Num HCI Command Packets
Command Opcode
Return Parameters
Status
Num HCI Command Packets
Command Opcode
Hardware Code
Number of Handles
Connection Handle [I]
HC Num Of Completed
Packets[I]
Link Type
Connection Handle
LMP Max Slots
Status
Connection Handle
Clock Offset
Yes
Yes
Yes
Yes
No
Yes
Yes
Host Controller & Baseband
Flush _Occurred
0x11
Connection Handle
Yes
Loopback _Command
0x19
HCI Command Packet
Yes
Connection _Packet _Type _Changed
0x1D
Status
Connection Handle
Packet Type
Yes
QoS _Violation
0x1E
Connection Handle
No
0x20
BD ADDR
Page Scan Repetition Mode
No
Page _Scan_ Repetition Mode Change
Notes:
a) No Link Key database.
b) ACL only. The generation of this event is based on buffer thresholds within the BCM2045. This event will however, be
returned periodically during periods of inactivity when credits are outstanding.
a)リンクキーのデータベースはありません。
b) ACL だけです。このイベントの発生は BCM2045 の中でバッファ閾値に基づいています。しかし
ながらこのイベンとは、クレジットが未解決である無活動の期間の間、定期的に返される。
TAIYO YUDEN Co.,Ltd.
Control No.
Control name
Electrical characteristics (Software B)
ＨＤ－ＡＥ－
Ｄ０７１０４４
（1／9）
電気的特性書
APPROVED
CHECKED
DRAWN
DESIGNED
2007.
11.16
(Software B)
PICS for Firmware Version XX.XX.XX
The Bluetooth® functions of this module are as below. Depending on firmware version upgrade,
the Bluetooth® functions are subject to change without notice.
RF
RF Capabilities (based on PICS proforma for Radio):
Table A.1: RF Capabilities
Item
Capability
Power Class (1,2 or 3)
Power Control
1-slot packets supported
3-slot packets supported
5-slot packets supported
79 Channels
Support for GFSK modulation
Support for π/4-DQPSK modulation
Support for BDPSK modulation
Status
Support
C.1
C.2
C.3
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
C.1 : Mandatory to support if Power Class 1 is supported, optional to support if Power Class 2 or 3 is supported.
C.2 : Mandatory if SUMMARY, 2-1/4 is claimed;
Optional if SUMMARY, 2-1/3 is claimed;
Excluded otherwise.
C.3 : Mandatory if SUMMARY, 2-1/4 is claimed;
Else Optional if (RF, 1/8 AND SUMMARY, 2-1/3) is claimed;
Baseband
Baseband Capabilities (based on PICS proforma for Baseband)
Table B.1: Physical Channel
Item
Capability
Support frequency band and 79 RF channels
Adaptive Frequency Hopping Kernel
Status
Support
Yes
Yes
Status
Support
Yes
Table B.1a: Modulation schemes
Item
Capability
Basic Data Rate, 1 Mbps payload data rate
Enhanced Data Rate, 2 Mbps payload data rate
C.1
Yes
Enhanced Data Rate, 3 Mbps payload data rate
C.2
Yes
C.1: Mandatory if (SUMMARY, 2-1/4) is claimed;
Optional if (SUMMARY, 2-1/3) is claimed;
Excluded otherwise.
C.2: Mandatory if (SUMMARY, 2-1/4) is claimed;
Optional if (BB, 1a/2 AND SUMMARY, 2-1/3) is claimed;
Excluded otherwise.
TAIYO YUDEN Co.,Ltd.
Control No.
Control name
Electrical characteristics (Software B)
ＨＤ－ＡＥ－
Ｄ０７１０４４
（2／9）
電気的特性書
APPROVED
CHECKED
DRAWN
2007.
11.16
(Software B)
Table B.2: Link Types
Item
Capability
Support of ACL link
Support of SCO link
Support of eSCO link
Support of Enhanced Data Rate ACL links
Support of Enhanced Data Rate eSCO links
Status
C.1
C.2
Support
Yes
Yes
Yes
Yes
Yes
Status
Support
Yes
C.1: Mandatory IF (SUMMARY, 2-2/1 OR SUMMARY, 2-2/2 ) is claimed;
ELSE Optional IF (SUMMARY, 2-1/3 OR SUMMARY, 2-1/4) is claimed;
Excluded otherwise.
C.2: Mandatory IF SUMMARY, 2-2/3 is claimed;
ELSE Optional IF (SUMMARY, 2-1/3 OR SUMMARY, 2-1/4) is claimed;
Excluded otherwise.
Prerequisite: 2/2 (Support of SCO link)
Item
Table B.3: SCO Link support
Capability
SCO links to same Slave
C.1
(3 SCO)
SCO links to different Slaves
(3 SCO)
SCO links from same Master
C.1
(3 SCO)
SCO links from different Masters
Yes
Yes
No
C.1: Mandatory to support at least 1 link.
Prerequisite: 2/3 (Support of eSCO link)
Item
Capability
eSCO links to same Slave
Status
Support
Yes
C.2
(6 SCO)
eSCO links to different Slaves
(5 SCO)
eSCO links from same Master
C.2
(6 SCO)
eSCO links from different Masters
Yes
Yes
No
C.2: Mandatory to support at least 1 link.
Table B.4: Common packet types
Item
Capability
Support of ID packet type
Support of NULL packet type
Support of POLL packet type
Support of FHS packet type
Support of DM1 packet type
Status
Support
Yes
Yes
Yes
Yes
Yes
Status
Support
Yes
Yes
Yes
Yes
Yes
Yes
Table B.5: ACL packet types
Item
Capability
Support of DH1 packet type
Support of DM3 packet type
Support of DH3 packet type
Support of DM5 packet type
Support of DH5 packet type
Support of AUX1 packet type
TAIYO YUDEN Co.,Ltd.
DESIGNED
Control No.
Control name
Electrical characteristics (Software B)
ＨＤ－ＡＥ－
Ｄ０７１０４４
（3／9）
電気的特性書
APPROVED
CHECKED
DRAWN
2007.
11.16
(Software B)
Table B.5a: Enhanced Data Rate ACL Packet Types
Prerequisite: 2/4 (Support of Enhanced Data Rate ACL links)
Item
Capability
Support 2-DH1 packet type
Support 2-DH3 packet type
Support 2-DH5 packet type
Support 3-DH1 packet type
Support 3-DH3 packet type
Support 3-DH5 packet type
Status
C.1
C.2
C.2
C.3
C.4
C.5
Support
Yes
Yes
Yes
Yes
Yes
Yes
Status
Support
Yes
Yes
Yes
Yes
Status
Support
Yes
Yes
Yes
C.1: Mandatory IF (SUMMARY, 2-2/1 OR SUMMARY, 2-2/2) is claimed;
ELSE Optional IF BB, 1a/2 is claimed;
Excluded otherwise.
C.2: Mandatory IF SUMMARY, 2-2/2 is claimed;
ELSE Optional IF BB, 1a/2 is claimed;
Excluded otherwise.
C.3: Mandatory IF (SUMMARY, 2-2/1 OR SUMMARY, 2-2/2) is claimed;
ELSE Optional IF BB, 1a/3 is claimed;
Excluded otherwise.
C.4: Mandatory IF SUMMARY, 2-2/2 is claimed;
ELSE Optional IF ( BB, 5a/2 AND BB, 5a/4) is claimed;
Excluded otherwise.
C.5: Mandatory IF SUMMARY, 2-2/2 is claimed;
ELSE Optional IF (BB, 5a/3 AND BB, 5a/4) is claimed;
Excluded otherwise.
Table B.6: SCO and eSCO packet types
Prerequisite for items 1-4: 2/2 (Support of SCO link)
Item
Capability
Support of HV1 packet type
Support of HV2 packet type
Support of HV3 packet type
Support of DV packet type
Prerequisite for items 5-7: 2/3 (Support of eSCO link)
Item
Capability
Support of EV3 packet type
Support of EV4 packet type
Support of EV5 packet type
Table B.6a: Enhanced Data Rate eSCO packet types
Prerequisite: 2/5 (Support Enhanced Data Rate eSCO links)
Item
Capability
Support 2 –EV3 packet type
Support 2 –EV5 packet type
Support 3 –EV3 packet type
Support 3 –EV5 packet type
C.1: Mandatory IF SUMMARY, 2-2/3 is claimed;
ELSE Optional IF BB, 1a/2 is claimed;
Excluded otherwise.
C.2: Optional IF BB, 1a/2 is claimed;
Excluded otherwise.
C.3: Mandatory IF SUMMARY, 2-2/3 is claimed;
ELSE Optional IF BB, 1a/3 is claimed;
Excluded otherwise.
C.4: Optional IF BB, 1a/3 is claimed;
Excluded otherwise.
TAIYO YUDEN Co.,Ltd.
DESIGNED
Status
C.1
C.2
C.3
C.4
Support
Yes
Yes
Yes
Yes
Control No.
Control name
Electrical characteristics (Software B)
ＨＤ－ＡＥ－
Ｄ０７１０４４
（4／9）
電気的特性書
APPROVED
CHECKED
DRAWN
2007.
11.16
(Software B)
Table B.7: Page procedures
Item
Capability
Status
Support
Yes
Yes
Yes
Status
Support
Yes
Status
C.1
C.1
C.1
Support
Yes
Yes
Yes
Item
Capability
Status
Supports Npage >= 1
Supports Npage >= 128
Supports Npage >= 256
Note: The master should use Npage >= 256 unless it knows what SR mode the slave uses.
Support
Yes
Yes
Yes
Support paging
Support page scan
Supports Interlaced Scan during page scan
Table B.8: Paging schemes
Item
Capability
Supports mandatory scan mode
Table B.9: Paging modes
Item
Capability
Supports paging mode R0
Supports paging mode R1
Supports paging mode R2
C.1: At least one of the paging scan modes must be supported.
Table B.9 (b): Paging train repetition
Table B.10: Inquiry procedures
Item
Item
Capability
Support inquiry
Inquiry scan with first FHS
Supports the dedicated inquiry access code
Supports Interlaced Scan during inquiry scan
Table B.11: Piconet capabilities
Capability
Broadcast messages
Point-to-multipoint connections
Status
Support
Yes
Yes
Yes
Yes
Status
Support
Yes
Yes (7)
Status
Support
Yes
Yes
Table B.12: Scatternet capabilities
Item
Item
Capability
Act as Master in one piconet and as Slave in another piconet
Act as Slave in more than one piconet
Table B.13: Synchronous Coding Schemes
Capability
Status
A-law
u-law
CVSD
Transparent Synchronous Data
TAIYO YUDEN Co.,Ltd.
DESIGNED
Support
Yes
Yes
Yes
Yes
Control No.
Control name
Electrical characteristics (Software B)
ＨＤ－ＡＥ－
Ｄ０７１０４４
（5／9）
電気的特性書
APPROVED
CHECKED
DRAWN
2007.
11.16
(Software B)
Link Manager
Link Manager Capabilities (based on PICS proforma for Link Manager)
Table C.1: Response Messages
Item
Capability
Accept message
Reject message
Status
Support
Yes
Yes
Status
C.1
C.2
C.3
Support
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Status
Support
Yes
Yes
Yes
Status
Support
Yes
Yes
Yes
C.1
Yes
C.1
C.2
Yes
Yes
Table C.2: Supported Features
Item
10
11
12
13
14
15
16
17
18
Capability
3-slot packets
5-slot packets
Encryption
Slot offset
Timing accuracy
Role switch (Master/Slave)
Hold mode
Sniff mode
Park mode
Power Control
Channel quality driven data rate
SCO link
RSSI
Broadcast encryption
eSCO link
Adaptive frequency hopping
Enhanced Data Rate ACL
Enhanced Data Rate eSCO
C.1: If Power Class 1 is supported (RF, 1/1=1) then Mandatory, else Optional.
C.2: Mandatory IF (SUMMARY 2-2/1 OR SUMMARY 2-2/2) is claimed;
ELSE Optional IF (SUMMARY 2-1/3 OR SUMMARY 2-1/4) is claimed;
Excluded otherwise.
C.3: Mandatory IF SUMMARY 2-2/3 is claimed;
ELSE Optional IF (SUMMARY 2-1/3 OR SUMMARY 2-1/4) is claimed;
Excluded otherwise.
Table C.3: Authentication
Item
Capability
Initiate authentication before connection completed
Initiate authentication after connection completed
Respond to authentication request
Item
Capability
Initiate pairing before connection completed
Initiate pairing after connection completed
Respond to pairing request
Use fixed PIN and request
responder to initiator switch
Use variable PIN
Accept initiator to responder switch
Table C.4: Pairing
C.1: Mandatory to support at least one of Pairing/ 4 and Pairing/5.
C.2: Mandatory to support if Pairing/5 and (Pairing/1 or Pairing/2) is supported.
TAIYO YUDEN Co.,Ltd.
DESIGNED
Control No.
Control name
Electrical characteristics (Software B)
ＨＤ－ＡＥ－
Ｄ０７１０４４
（6／9）
電気的特性書
APPROVED
CHECKED
DRAWN
2007.
11.16
(Software B)
Table C. 5: Link Keys
Item
Capability
Creation of link key - Unit Key
Creation of link key - Combination Key
Initiate change of link key
Accept change of link key
Accept pairing with Unit Key
C.1: Mandatory to support at least one of the key types.
Status
C.1
C.1
Support
No
Yes
Yes
Yes
Yes
Status
Support
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Status
Support
Yes
Yes
Status
C.1
Support
Yes
Table C.6: Encryption
Prerequisite: 2/3(Encryption supported)
Item
Capability
Initiate encryption
Accept encryption requests
Key size negotiation
Start encryption, as master
Accept start of encryption
Stop encryption, as master
Accept stop of encryption
Table C.7: Clock offset information
Item
Capability
Request clock offset information
Respond to clock offset requests
Table C.8: Slot offset information
Item
Capability
Send slot offset information
C.1: Mandatory to support if support if support if Role Switch/1 (Master/Slave switch) otherwise optional.
Table C.9: Timing accuracy information
Item
Item
Capability
Request timing accuracy information
Respond to timing accuracy information requests
Table C.10: LM version information
Capability
Request LM version information
Respond to LM version information requests
Status
Support
Yes
Yes
Status
Support
Yes
Yes
Status
C.1
C.2
C.2
Support
Yes
Yes
Yes
Yes
Table C.11: Feature support
Item
Capability
Request supported features
Respond to supported features requests
Request extended features mask
Respond to extended features Request
C.1: Mandatory to support if any of the optional features in Supported Features/1-3, Supported Features /5,
Supported Features /7-12, Supported Features /14-16, Adaptive Frequency Hopping/1 is requested by
the IUT otherwise optional.
C.2: Mandatory if a feature requiring another features page is supported, otherwise optional.
TAIYO YUDEN Co.,Ltd.
DESIGNED
Control No.
Control name
Electrical characteristics (Software B)
ＨＤ－ＡＥ－
Ｄ０７１０４４
（7／9）
電気的特性書
APPROVED
CHECKED
DRAWN
2007.
11.16
(Software B)
Table C.12: Name information
Item
Capability
Request name information
Respond to name requests
Status
Support
Yes
Yes
Status
Support
Yes
Yes
Status
Support
Yes
Table C.13: Role Switch
Prerequisite: 2/6(Role switch)
Item
Capability
Request Master Slave switch
Accept Master Slave switch requests
Table C.14: Detach
Item
Capability
Detach connection
Table C.14a: Setting up and Removing Enhanced Data Rate ACL Connection
Item
Capability
Enter Enhanced Data Rate
Exit Enhanced Data Rate
Status
C.1
C.1
Support
Yes
Yes
C.1: Mandatory if LMP, 2/17 supported , otherwise excluded.
Table C.14b: Setting up and Removing Enhanced Data Rate eSCO Connection
Item
Capability
Enter and exit eSCO using Enhanced Data Rate Packets
Status
C.1
Support
Yes
Status
C.1
Support
No
Yes
Yes
Yes
Status
Support
Request sniff mode
Respond to sniff mode requests (rengotiate or reject)
Yes
Yes
Request un-sniff
Accept un-sniff requests
C.1
Yes
Yes
C.1: Mandatory if LMP, 2/18supported , otherwise excluded.
Table C.15: Hold mode
Prerequisite: 2/7 (Hold mode)
Item
Capability
Force hold mode
Request hold mode
Respond to hold mode requests
Accept forced hold mode
C.1: Mandatory to support if LMP, 15/1 (Force hold mode) is supported, otherwise optional.
Table C.16: Sniff mode
Item
Capability
C.1: If LMP, 16/2 (Request sniff mode) is supported then mandatory to support, otherwise optional.
TAIYO YUDEN Co.,Ltd.
DESIGNED
Control No.
Control name
Electrical characteristics (Software B)
ＨＤ－ＡＥ－
Ｄ０７１０４４
（8／9）
電気的特性書
APPROVED
CHECKED
DRAWN
DESIGNED
2007.
11.16
(Software B)
Table C.17: Park mode
Item
10
11
12
13
Capability
Status
Support
Request park mode
Respond to park mode requests
Yes
Yes
Set up broadcast scan window
Accept changes to the broadcast scan window
Modify beacon parameters
Accept modification of beacon parameters
Request Unpark using PM_ADDR
Request Unpark using BD_ADDR
Slave requested Unpark
Accept Unpark using PM_ADDR
Accept Unpark using BD_ADDR
C.1
C.1
No
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Prerequisite: 2/13 (RSSI)
Item
Capability
Request to increase power
Request to decrease power
Status
Support
Yes
Yes
Prerequisite: 2/10(Power contorol)
Item
Capability
Respond when max power reached
Respond when min power reached
Status
Support
Yes
Yes
Status
Support
Yes
Yes
Status
Support
C.1
Yes
Yes
Yes
Status
C.1
C.2
C.3
C.4
Support
Yes
Yes
Yes
Yes
Yes
Yes
Yes
C.1: If LMP, 17/3 (Respond to park mode requests) is supported then at least one of LMP, 17/9
(Unpark using PM_ADDR) or LMP, 17/10 (Unpark using BD_ADDR) is mandatory to support, otherwise
optional.
Table C.18: Power Control
Table C.19: Link supervision timeout
Item
Capability
Set link supervision timeout value
Accept link supervision timeout setting
Item
Capability
Channel quality driven change between DM and DH packet
types
Force/Request change of Quality of Service
Request change of Quality of Service
Table C.20: Quality of Service
C.1: Mandatory to support if support of LMP, 2/11 is stated in the feature request, otherwise optional.
Table C.21: SCO Links
Prerequisite: 2/12 (SCO links)
Item
Capability
Initiate SCO links, as Master
Initiate SCO links, as Slave
Accept SCO links
Remove SCO links, as Master
Remove SCO links, as Slave
Negotiate SCO link parameters, as Master
Negotiate SCO link parameters, as Slave
C.1: Mandatory to support if LMP, 21/1 (Initiating SCO links, as Master) is supported, otherwise optional.
C.2: Mandatory to support if LMP, 21/2 (Initiating SCO links, as Slave) is supported, otherwise optional.
C.3: Mandatory to support if LMP, 21/1 (Initiating SCO links, as Master) or LMP, 21/3 (Accept SCO links) is
supported, otherwise optional.
C.4: Mandatory to support if LMP, 21/2 (Initiating SCO links, as Slave) or LMP, 21/3 (Accept SCO links) is supported,
otherwise optional.Comments:
TAIYO YUDEN Co.,Ltd.
Control No.
Control name
Electrical characteristics (Software B)
ＨＤ－ＡＥ－
Ｄ０７１０４４
（9／9）
電気的特性書
APPROVED
CHECKED
DRAWN
DESIGNED
2007.
11.16
(Software B)
Table C.22: Multi-Slot packages
Item
Capability
Accept maximum allowed number of slots to be used
Request maximum number of slots to be used
Accept request of maximum number of slots to be used
Status
C.1
C.1
C.1
Support
Yes
Yes
Yes
Status
Support
No
No
No
No
Status
Support
Yes
Yes
Yes
Status
Support
Yes
Yes
Yes
Yes
Status
C.1
C.2
C.3
Support
Yes
Yes
Yes
Yes
Yes
Yes
C.1: Mandatory to support if LMP, 2/1 and/or LMP, 2/2 is supported in the feature request, otherwise optional.
Table C.23: Paging scheme
Item
Capability
Request page mode to use
Accept suggested page mode
Request page scan mode to use
Accept suggested page scan mode
Table C.24: Connection Establishment
Item
Capability
Create connection for higher layers
Respond to requests to establish connections for higher layers
Indicate that link set-up is completed
Table C.25: Test Mode
Item
Capability
Activate test mode
Ability to reject activation of test mode if test mode is disabled
Control test mode
Ability to reject test mode control commands if test mode is
disabled.
Table C.26: Adaptive Frequency Hopping
Prerequisite: 2/20(AFH)
Item
Capability
Support of AFH switch as master
Support of AFH switch as slave
Support of Channel Classification reporting as master
Support of Channel Classification reporting as slave
Support channel classification from host
Support of Channel Classification
C.1: Optional if LMP, 26/6 is supported, otherwise excluded.
C.2: Mandatory if LMP, 26/6 is supported, otherwise excluded.
C.3: Mandatory if LMP, 26/1 or LMP, 26/4 is supported, otherwise optional.
TAIYO YUDEN Co.,Ltd.
Control No.
ＨＤ－ＡＤ－
Ａ０７１０４４
（1／1）
Control name
APPROVED
Outline･Appearance
CHECKED
DRAWN
DESIGNED
2007.
11.16
外形・外観図
Unit：mm，Tolerances unless otherwise specified：±0.2mm
単位：mm，指示無き公差：±0.2mm
TAIYO YUDEN Co., Ltd.
Control No.
Control name
APPROVED
CHECKED
DRAWN
DESIGNED
Outline･Appearance
ＨＤ－ＡＤ－
Ｂ０７１０４４
（1／3）
2007.
11.16
外形・外観図
１．Indication Label 1 description (back-side)
ラベル 1 表示内容 (基板側)
1) BD address number
BD アドレス番号
2) Product Lot number
製造 Lot 番号
3) Version ID
Version ID
： ０００３７Ａ◇◇◇◇◇◇ (Refer to ｢Instruction for lot number｣)
： ０００３７Ａ◇◇◇◇◇◇（ロット番号解説書参照）
： Four digits (Refer to ｢Instruction for lot number｣)
： ４桁 （ロット番号解説表参照）
： Ver. A
： Ver. A
13.8±0.3
1)
00037AXXXXXX
XXXX
2)
Ver. A
3)
24.0±0.3
Material ：ＰＥＴ（ＵＬ９６９） ／ Label color：White ／ Printing ：Black
材質
：ＰＥＴ（ＵＬ９６９）／ ラベル色 ：白 ／ 印字
：黒
TAIYO YUDEN Co., Ltd.
Control No.
ＨＤ－ＡＤ－
Ｂ０７１０４４
（2／3）
Control name
APPROVED
CHECKED
DRAWN
Outline･Appearance
DESIGNED
2007.
11.16
外形・外観図
２．Indication Label 2-1description (front-side ,Two-Layer Label ,Upper Layer )
ラベル 2 表示内容 (ケース側 2 層ラベル 1 枚目表面)
1) Product Number
： EYBMABA
認証型式
： EYBMABA
2) Industry Canada ID
： 4389B-EYBMABA
3) FCC ID
： RYYEYBMABA
4) JAPAN logo mark
： Specified logo mark
日本電波法ロゴマーク
： 規定ロゴマーク
5) ARIB, Actual indication
： Indicates that this device is “Second Generation Low Power Data Communication System”
ARIB 現品表示
： 「第二世代小電力データ通信システム」であることを表記
6) JAPAN qualification number ： 201WW07215247
日本電波法認証番号
： 201WW07215247
： Taiyo Yuden Co., Ltd.
7) Manufacture (English)
製造
： 太陽誘電株式会社
1)
2)
3)
2.4FH1
4)
5)
6)
7)
Material ：ＰＥＴ（ＵＬ９６９） ／ Label color：White ／ Printing ：Black
材質
：ＰＥＴ（ＵＬ９６９）／ ラベル色 ：白 ／ 印字
：黒
TAIYO YUDEN Co., Ltd.
Control No.
ＨＤ－ＡＤ－
Ｂ０７１０４４
（3／3）
Control name
APPROVED
CHECKED
DRAWN
Outline･Appearance
2007.
11.16
外形・外観図
３．Indication Label 2 description (front-side ,Two-Layer Label ,Lower Layer)
ラベル 2 表示内容 (ケース側 2 層ラベル 2 枚目表面)
1) R&TTE CE mark
： Specified CE mark
R&TTE CE 表示
： CE0560
1)
TAIYO YUDEN Co., Ltd.
DESIGNED
Control No.
Control name
APPROVED
Pin layout
ＨＤ－ＢＡ－
Ａ０７１０４４－A
（1／2）
ピンレイアウト図
（１）Terminal layout drawing
端子配置図
①
②
③
④
⑤
shielding case
シールドケース
⑥
⑦
⑧
TAIYO YUDEN Co., Ltd.
CHECKED
DRAWN
DESIGNED
2007.7.6
Control No.
Control name
APPROVED
CHECKED
DRAWN
Pin layout
ＨＤ－ＢＡ－
Ａ０７１０４４－A
（2／2）
DESIGNED
2007.7.6
ピンレイアウト図
CN1
Terminal
No.
Terminal name
VDD
UART_CTS
GND
Input/Output
Description
Terminal States on
RESET
Input
DC3.3V Power supply
Input
UART clear to send active low
With internal pull-up
-with internal pull-up resistor that ranges in value from
20k to 100k depending on process.
(flow control signal from host)
Output
Note 1
Ground
UART request to send active low
With internal pull-up
-with internal pull-up resistor that ranges in value from
20k to 100k depending on process.
(flow control signal to host)
Active low RESET signal
With internal pull-up
-with internal pull-up resistor that ranges in value from
25k to 100k depending on process.
TX data to host
With internal pull-up
-with internal pull-up resistor that ranges in value from
20k to 100k depending on process.
UART_RTS
/RESET
UART_TX
Output
VREG_CTL
Input
VREG1 enable/disable control signal. (Active low)
UART_RX
Input
RX data from host
With internal pull-up
-with internal pull-up resistor that ranges in value from
20k to 100k depending on process.
Input
Remark
Notes:
1. Pin1 is used for power supply of BT module. (MAX 1A).
To fill the standard of “Supply voltage ripple and spike noise”, the capacitor ,which has the capacity of TBDμF or more, should be pin
the terminal VDD outside as a bypass capacitor .
TAIYO YUDEN Co., Ltd.
FCC Regulatory Information
CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied
antenna. Unauthorized antenna, modification, or attachments could damage the transmitter
and may violate FCC regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may Cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Canada Regulatory Information
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
L'utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
R&TTE Directive Information
Hereby Taiyo Yuden Co., Ltd., declares that this Complete Class2 Bluetooth Module (Model
No.: EYBMABA) is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
The declaration of Conformity may be obtained at;
Taiyo Yuden Co., Ltd.
8-1 Sakae-Cho, Takasaki-Shi Gunma, JAPAN 370-8522
Telephone No.) 81-27-324-2313; Fax No.)81-27-324-2314.
CAUTION
Please note that this users manual should not be provided to end-users.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the requirement.
Notice
- At the installation of our Complete Class2 Bluetooth Module (Model No.: EYBMABA) into
the device, following information should be provided with end-user under the responsibility
of the manufacture who integrates it into their device.
The following sentence has to be displayed on the outside of the device in which the module is
installed:
"Contains Transmitter Module FCC ID: RYYEYBMABA/ IC ID: 4389B-EYBMABA", or
"Contains FCC ID: RYYEYBMABA/ IC ID: 4389B-EYBMABA "
FCC Regulatory information
CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied
antenna. Unauthorized antenna, modification, or attachments could damage the transmitter
and may violate FCC regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
Cause undesired operation.
Canada Regulatory information
Operation is subject to the following two conditions:
(3) this device may not cause interference, and
(4) this device must accept any interference, including interference that may cause undesired
operation of the device.
L'utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
(3) il ne doit pas produire de brouillage et
l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si
ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
R&TTE Directive information
Hereby [Name of manufacture(*)], declares that this [type of equipment(*)] is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC
(*) Note: Please write in your company name and type of equipment into [ ].
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 6.0 (Windows)
Modify Date                     : 2007:12:05 16:03:50+09:00
Create Date                     : 2007:11:16 15:23:28+09:00
Metadata Date                   : 2007:12:05 16:03:50+09:00
Document ID                     : uuid:a56faef6-4936-41dd-a529-2597afd5b781
Instance ID                     : uuid:a425b790-fa4b-4299-9db9-451fb2c18c76
Format                          : application/pdf
Title                           : untitled
Has XFA                         : No
Page Count                      : 36
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RYYEYBMABA

Navigation menu