TAKAYA TR3XM-SX01 RFID READER/Writer User Manual TR3XM SX01 EN 100
TAKAYA Corporation RFID READER/Writer TR3XM SX01 EN 100
TAKAYA >
Contents
- 1. manual
- 2. User manual
manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1656629 |
| Application ID | u0WdNXfQNNUUVdn4OWn1og== |
| Document Description | manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 45.59kB (569880 bits) |
| Date Submitted | 2012-03-15 00:00:00 |
| Date Available | 2012-03-19 00:00:00 |
| Creation Date | 2012-03-15 09:53:21 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2012-03-15 09:53:21 |
| Document Title | Microsoft Word - TR3XM-SX01-EN-100.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | HKimura |
User’s Manual TR3XM-SD01 TR3XM-SU01 TR3XM-SN01 Manual No.TDR-MNL-SX01-EN-100 Introduction Thank you for purchasing a TR3XM-SD01／SU01／SN01 RFID READER/WRITER. Be sure to read this manual before using the product. After reading it, store the manual in a convenient place for future reference. Manual No.TDR-MNL-SX01-EN-100 TAKAYA RFID TR3 Series Regulations and Standards FCC This product is conform to the FCC standards. FCC Rules (Federal Communications Commission) This product complies with Part 15 Subpart B and C of the FCC Rules. FCC ID : MK4TR3XM-SX01 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Japan Radio Law Equipment using high frequencies: Inductive Reading/Writing Communications Equipment Conforming standards: Inductive Reading/Writing Communications Equipment; Standard: ARIB STD-T82 RoHS is support Restriction of Hazardous Substances Waste Dispose of the Products as industrial waste. Manual No.TDR-MNL-SX01-EN-100 TAKAYA RFID TR3 Series Safety Precautions The following symbols are used in this manual to indicate precautions that must be observed to ensure safe use of this product. The precautions provided here contain important safety information. Be sure to observe these precautions. The following signal words are used in this manual. Failure to comply with a WARNING may result in serious injury or death. Failure to comply with a CAUTION may result in injury to the operator, or damage to the items involved. Be sure to observe the following precautions to ensure safe use of the Products. Decomposition of this product and cable, repair, remodeling, please strictly prohibited. There is the possibility of fire or electric shock injuries. This product is using the RFID reader writer radio equipment. Therefore, depending on where the applications you use may affect medical equipment. To minimize the impact of medical equipment for use, please observe the following countermeasure. The Japan Automatic Identification Systems Association (JAISA) guidelines are as follows: RFID antennas from implanted cardiac pacemakers or other medical devices please 22cm apart. We recommend that you paste "RFID sticker" at equipment. ← RFID Sticker Be sure to observe the following precautions to ensure safe use of the Products. Installation and storage environment 1. Do not use the Products in sunlight. 2. Do not use the Products in environment of spray of water, oil or chemicals. 3. Do not use the Products in environments with flammable, explosive, or corrosive gasses. 4. Do not use the Products in environment of hot humid. 5. Do not use the Products in environment of vibration or shock. 6. Do not use the Products in environment of condensation. 7. Do not use the Products in environment of around the metal is covered. 8. Do not use the Products in environment of high temperature. 9. Do not use the Products in environment that has a device that generates magnetic field and shock voltage. 10. Do not use the Products in unstable place. 11. If there is failure, discontinue use immediately, please contact us or the distributor. Installation 1. Turn off the power before installation or removing. 2. The following effects may not work correctly. ･ Near 13.56MHz radio device ･ Near speakers , Inverter, motor and Plasma Display 3. The communication range may vary due to environment and conditions. Manual No.TDR-MNL-SX01-EN-100 TAKAYA RFID TR3 Series Contents Product Overview ........................................................................................................ 1 1.1 Names of Parts and Functions ....................................................................................... 3 2.1 2.2 2.3 Features .............................................................................................................................................. 1 TR3XM-SD01 ..................................................................................................................................... 3 TR3XM-SU01 ..................................................................................................................................... 4 TR3XM-SN01 ..................................................................................................................................... 5 Setting and connection .................................................................................................. 6 3.1 Setting ................................................................................................................................................. 6 3.1.1 DeskTop ........................................................................................................................................... 6 3.1.2 Wall Installation ................................................................................................................................ 6 3.2 Connection .......................................................................................................................................... 7 3.2.1 Attaching the Cable ........................................................................................................................... 7 Specifications ............................................................................................................... 8 4.1 4.2 4.3 Accessories ................................................................................................................. 17 5.1 5.2 5.3 5.4 TR3XM-SD01 ..................................................................................................................................... 8 TR3XM-SU01 .................................................................................................................................... 11 TR3XM-SN01 ................................................................................................................................... 14 AC Adapter(TR3-PWR-5V-1) ............................................................................................................ 17 RS232C Cross-cable(CB-232C-2) ...................................................................................................... 18 USB Cable(GH-USB20/1.8M) ............................................................................................................ 19 RFID Sticker (SEL41400L) ............................................................................................................... 20 Maintenance .............................................................................................................. 21 Revision History ............................................................................................................... 22 Manual No.TDR-MNL-SX01-EN-100 TAKAYA RFID TR3 Series 1 Product Overview 1.1 Features 1 Product Overview 1.1 Features This product uses the 13.56MHz frequency. This product is the electromagnetic induction type non-contact IC can read and write RFID tag data. This Product is the desktop reader choice to support various contactless applications such as electronic ID, payment & public transportation schemes and to interact with NFC-enabled devices. Host Device Interface RS-232C、LAN(TCP/IP)、USB Interface Module LED/ BUZZ ER UART(CMOS Level) CPU Load Settings Memory Save Settings Communications Antenna TR3-A202 RF-ASIC Tags TR3-C302(READER/WRITER Module) TR3XM-SD01/TR3XM-SU01/TR3XM-SN01 Block Diagram Model Name Host Device Interface TR3XM-SD01 RS232C TR3XM-SU01 USB TR3XM-SN01 TCP/IP Host Device Interface Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series 1 Product Overview 1.1 Features ■ Conform to international standards ISO/IEC15693 and ISO/IEC18000-3(Mode1, 3) ISO/IEC14443 TypeA ISO/IEC14443 TypeB ISO/IEC18052(Passive Mode), FeliCa ■ Software TR3-series common communication protocol Software Development Kit ■ Useful Continuous inventory mode UID of the tag automatically sends Host Device. RDLoop mode UID or User Data of the tag automatically sends Host Device. For more information please refer to the TR3-PROTOCOL manual. ■ Environmentally EU RoHS(2002/95/EC) Support Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series 2 Names of Parts and Functions 2.1 TR3XM-SD01 2 Names of Parts and Functions 2.1 TR3XM-SD01 ③ ④ ⑨ ⑧ ② ⑤ ⑦ ⑥ ① No ① ② Name RFID sticker FCC ID sticker Description Specify that the RFID radio waves are radiated. Production numbers, will be 8-digit serial number. Model Name Serial number：＊＊＊＊＊＊＊＊(F) ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ Connector DC Jack Rubber leg Buzzer LED Cable hook Screw holes Connect the RS-232C cable. DC +5V input. 4pcs Sounds according to settings. Displays the status of this product. Hook the AC adapter cable that comes with. M4 holes Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series 2 Names of Parts and Functions 2.2 TR3XM-SU01 2.2 TR3XM-SU01 ③ ⑦ ② ④ ⑥ ⑤ ① No ① ② Name RFID sticker FCC ID sticker Description Specify that the RFID radio waves are radiated. Production numbers, will be 8-digit serial number. Model Name Serial number：＊＊＊＊＊＊＊＊(F) ③ ④ ⑤ ⑥ ⑦ Connector Rubber leg Buzzer LED Screw holes Connect the USB cable. 4pcs Sounds according to settings. Displays the status of this product. M4 holes Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series 2 Names of Parts and Functions 2.3 TR3XM-SN01 2.3 TR3XM-SN01 ⑩ ③ ⑪ ④ ⑧ ② ⑨ ⑤ ⑦ ⑥ ① No ① ② Name RFID sticker FCC ID sticker Description Specify that the RFID radio waves are radiated. Production numbers, will be 8-digit serial number. Model Name Serial number：＊＊＊＊＊＊＊＊(F) ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Connector DC Jack Rubber leg Buzzer LED Cable hook Screw holes Reset switch State switch Connect the TCP/IP cable. DC +5V input. 4pcs Sounds according to settings. Displays the status of this product. Hook the AC adapter cable that comes with. M4 holes Selection of User setting or Default is made. Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series 3 Setting and connection 3.1 Setting 3 Setting and connection 3.1 Setting 3.1.1 DeskTop 3.1.2 Wall Installation M4 Screw Wall Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series 3 Setting and connection 3.2 Connection 3.2 Connection This product connects with Host Device with the cable. 3.2.1 Attaching the Cable Model Name TR3XM-SD01 TR3XM-SU01 TR3XM-SN01 Manual No.TDR-MNL-C202-A0-1-EN-100 Cable RS232C Cable USB Cable LAN Cable TAKAYA RFID TR3 Series 4 Specifications 4.1 TR3XM-SD01 4 Specifications 4.1 TR3XM-SD01 Specifications Item Applicable Japan Radio Law Standards FCC Parameter ARIB STD-T82 FCC Part 15 Subpart B,C FCC ID : MK4TR3XM-SX01 EU RoHS(2002/95/EC) Supports 13.56MHz ±50ppm(Ta=25℃) or less 13.56MHz ±40kHz(Ta=25℃) RoHS Carrier frequency Antenna Resonant frequency Transmit power or 10～200mW ± 20%(Ta=25℃, VCC=5.0V) power range Standards ISO/IEC 15693、ISO/IEC18000-3(Mode1、Mode3) ISO/IEC 14443A、ISO/IEC 14443B、ISO/IEC 18092（FeliCa） Tags Tag-it HF-I, my-d, I･CODE SLI, MB89R118 Mifare Ultralight, FeliCa Data rate ・ISO/IEC 15693,ISO/IEC18000-3(Mode1) Speed Data rate 1/4 26.48kbps Product⇒Tag 1/256 1.65kbps 26.69kbps Tag⇒Product ・ISO/IEC18000-3(Mode3) Parameter Product⇒Tag 26.7kbps～100kbps 53kbps Tag⇒Product ・ISO/IEC 14443A, ISO/IEC 14443B 106 kbps ・ISO/IEC 18092(Passive Mode) 212kbps Modulation ・ISO/IEC 15693,ISO/IEC18000-3(Mode1) Parameter ASK 10% / ASK 100% Product⇒Tag ASK Tag⇒Product ・ISO/IEC18000-3(Mode3) Parameter ASK 10% Product⇒Tag ASK Tag⇒Product ・ISO/IEC 14443A Parameter ASK 100% Product⇒Tag ASK Tag⇒Product ・ISO/IEC 14443B ・ISO/IEC 18092(Passive Mode) Parameter ASK 10% Product⇒Tag ASK Tag⇒Product ※1：Tag-it HF-I is a registered trademark of Texas Instruments Incorporated. my-d is a registered trademark of Infineon Technologies AG. I･CODE SLI and MIFARE UltraLight are a registered trademark of NXP Semiconductors. FeliCa is a registered trademark of Sony Corporation. MB89R118 is a registered trademark of FUJITSU Japan. Radio Frequency Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series 4 Specifications Item Communication distance Specifications 4.1 TR3XM-SD01 Parameter Standards Communication distance ISO/IEC 15693 10cm ISO/ISC 18000-3 (Mode1) ISO/ISC 18000-3 8cm (Mode3) ISO/ISC 14443A 5.5cm ISO/ISC 14444B 1cm ISO/ISC 18092 3cm (Passive Mode) (Communication distance depends on the environment.) Anti-collision Control Host Interface Standards ISO/IEC 15693 ISO/ISC 18000-3 (Mode1) ISO/ISC 18000-3 (Mode3) ISO/ISC 14443A ISO/ISC 14444B ISO/ISC 18092 (Passive Mode) RS-232C Item Speed Data bits Parity Stop bit Flow control Connector LED BUZZER RS-232C YES No No No Parameter 9600bps 19200bps(※2) 38400bps None None 3 LED (red/green/blue) 1 BUZZER Connector D-SUB 9Pin Pin assignment Pin No. DC JACK Anti-collision YES Symbol NC Rx Tx NC GND NC NC NC NC Function Not Connected Received data signal Transmitted data signal Not Connected GND Not Connected Not Connected Not Connected Not Connected EIAJ TYPEⅡ(CENTER PLUS) ※2：initialization Manual No.TDR-MNL-C202-A0-1-EN-100 TAKAYA RFID TR3 Series 4 Specifications Item Mechanical Dimensions data (W x D x H) Weight Installation Electrical data Power Ambient Conditions Temperature Operating range Humidity Operating range Temperature Storage range Humidity Storage range AC Adaptor Accessories Parameter 140 x 110 x 38.5mm (Protrusions except) approx. 270g M4 Screw Screw is not included. Supply Voltage Current consumption Carrier off Power down mode Consumption 0 to 40 degree ：5V±10% ：approx. 170mA ：approx. 53mA ：approx. 44mA ：max 1.4W 30 to 80%RH 0 to 55 degree 30 to 80%RH TR3-PWR-5V-1 RS232C Cross-cable CB-232C-2 RFID Sticker SEL41400L CD-ROM CDROM-TR3MNL Manual No.TDR-MNL-C202-A0-1-EN-100 Specifications 4.1 TR3XM-SD01 10 1 sheet TAKAYA RFID TR3 Series 4 Specifications 4.2 TR3XM-SU01 4.2 TR3XM-SU01 Specifications Item Applicable Japan Radio Law Standards FCC Parameter ARIB STD-T82 FCC Part 15 Subpart B,C FCC ID : MK4TR3XM-SX01 EU RoHS(2002/95/EC) Supports 13.56MHz ±50ppm(Ta=25℃) or less 13.56MHz ±40kHz(Ta=25℃) RoHS Carrier frequency Antenna Resonant frequency Transmit power or 10～200mW ± 20%(Ta=25℃, VCC=5.0V) power range Standards ISO/IEC 15693、ISO/IEC18000-3(Mode1、Mode3) ISO/IEC 14443A、ISO/IEC 14443B、ISO/IEC 18092（FeliCa） Tags Tag-it HF-I, my-d, I･CODE SLI, MB89R118 Mifare Ultralight, FeliCa Data rate ・ISO/IEC 15693,ISO/IEC18000-3(Mode1) Speed Data rate 1/4 26.48kbps Product⇒Tag 1/256 1.65kbps 26.69kbps Tag⇒Product ・ISO/IEC18000-3(Mode3) Parameter Product⇒Tag 26.7kbps～100kbps 53kbps Tag⇒Product ・ISO/IEC 14443A, ISO/IEC 14443B 106 kbps ・ISO/IEC 18092(Passive Mode) 212kbps Modulation ・ISO/IEC 15693,ISO/IEC18000-3(Mode1) Parameter ASK 10% / ASK 100% Product⇒Tag ASK Tag⇒Product ・ISO/IEC18000-3(Mode3) Parameter ASK 10% Product⇒Tag ASK Tag⇒Product ・ISO/IEC 14443A Parameter ASK 100% Product⇒Tag ASK Tag⇒Product ・ISO/IEC 14443B ・ISO/IEC 18092(Passive Mode) Parameter ASK 10% Product⇒Tag ASK Tag⇒Product ※1：Tag-it HF-I is a registered trademark of Texas Instruments Incorporated. my-d is a registered trademark of Infineon Technologies AG. I･CODE SLI and MIFARE UltraLight are a registered trademark of NXP Semiconductors. FeliCa is a registered trademark of Sony Corporation. MB89R118 is a registered trademark of FUJITSU Japan. Radio Frequency Manual No.TDR-MNL-C202-A0-1-EN-100 11 TAKAYA RFID TR3 Series 4 Specifications Item Communication distance Specifications 4.2 TR3XM-SU01 Parameter Standards Communication distance ISO/IEC 15693 10cm ISO/ISC 18000-3 (Mode1) ISO/ISC 18000-3 8cm (Mode3) ISO/ISC 14443A 5.5cm ISO/ISC 14444B 1cm ISO/ISC 18092 3cm (Passive Mode) (Communication distance depends on the environment.) Anti-collision Control Connector Platform Standards Anti-collision ISO/IEC 15693 YES ISO/ISC 18000-3 (Mode1) ISO/ISC 18000-3 YES (Mode3) ISO/ISC 14443A No ISO/ISC 14444B No ISO/ISC 18092 No (Passive Mode) Windows2000, Windows XP, Windows Vista, Windows 7 Host Interface USB2.0/1.1(Virtual COM Port) Item Parameter Speed 9600bps 19200bps(※2) 38400bps Data bits Parity None Stop bit Flow control None LED BUZZER USB 3 LED (red/green/ blue) 1 BUZZER Connector USB B(Receptacle) Pin assignment Pin No. Symbol Vbus DD+ GND Function POWER data signal data signal GND ※2：initialization Manual No.TDR-MNL-C202-A0-1-EN-100 12 TAKAYA RFID TR3 Series 4 Specifications Item Mechanical Dimensions data (W x D x H) Weight Installation Electrical data Power Ambient Conditions Temperature Operating range Humidity Operating range Temperature Storage range Humidity Storage range USB cable Accessories Parameter 140 x 110 x 38.5mm (Protrusions except) approx. 270g M4 Screw Screw is not included. Supply Voltage Current consumption Carrier off Power down mode Consumption 0 to 55 degree ：5V±10% ：approx. 180mA ：approx. 61mA ：approx. 70mA ：max 1.4W 30 to 80%RH 0 to 55 degree 30 to 80%RH GH-USB20/1.8M RFID Sticker SEL41400L CD-ROM CDROM-TR3MNL Manual No.TDR-MNL-C202-A0-1-EN-100 Specifications 4.2 TR3XM-SU01 13 1 sheet TAKAYA RFID TR3 Series 4 Specifications 4.3 TR3XM-SN01 4.3 TR3XM-SN01 Specifications Item Applicable Japan Radio Law Standards FCC Parameter ARIB STD-T82 FCC Part 15 Subpart B,C FCC ID : MK4TR3XM-SX01 EU RoHS(2002/95/EC) Supports 13.56MHz ±50ppm(Ta=25℃) or less 13.56MHz ±40kHz(Ta=25℃) RoHS Carrier frequency Antenna Resonant frequency Transmit power or 10～200mW ± 20%(Ta=25℃, VCC=5.0V) power range Standards ISO/IEC 15693、ISO/IEC18000-3(Mode1、Mode3) ISO/IEC 14443A、ISO/IEC 14443B、ISO/IEC 18092（FeliCa） Tags Tag-it HF-I, my-d, I･CODE SLI, MB89R118 Mifare Ultralight, FeliCa Data rate ・ISO/IEC 15693,ISO/IEC18000-3(Mode1) Speed Data rate 1/4 26.48kbps Product⇒Tag 1/256 1.65kbps 26.69kbps Tag⇒Product ・ISO/IEC18000-3(Mode3) Parameter Product⇒Tag 26.7kbps～100kbps 53kbps Tag⇒Product ・ISO/IEC 14443A, ISO/IEC 14443B 106 kbps ・ISO/IEC 18092(Passive Mode) 212kbps Modulation ・ISO/IEC 15693,ISO/IEC18000-3(Mode1) Parameter ASK 10% / ASK 100% Product⇒Tag ASK Tag⇒Product ・ISO/IEC18000-3(Mode3) Parameter ASK 10% Product⇒Tag ASK Tag⇒Product ・ISO/IEC 14443A Parameter ASK 100% Product⇒Tag ASK Tag⇒Product ・ISO/IEC 14443B ・ISO/IEC 18092(Passive Mode) Parameter ASK 10% Product⇒Tag ASK Tag⇒Product ※1：Tag-it HF-I is a registered trademark of Texas Instruments Incorporated. my-d is a registered trademark of Infineon Technologies AG. I･CODE SLI and MIFARE UltraLight are a registered trademark of NXP Semiconductors. FeliCa is a registered trademark of Sony Corporation. MB89R118 is a registered trademark of FUJITSU Japan. Radio Frequency Manual No.TDR-MNL-C202-A0-1-EN-100 14 TAKAYA RFID TR3 Series 4 Specifications Item Communication distance Specifications 4.3 TR3XM-SN01 Parameter Standards Communication distance ISO/IEC 15693 10cm ISO/ISC 18000-3 (Mode1) ISO/ISC 18000-3 8cm (Mode3) ISO/ISC 14443A 5.5cm ISO/ISC 14444B 1cm ISO/ISC 18092 3cm (Passive Mode) (Communication distance depends on the environment.) Anti-collision Control Host Interface Standards ISO/IEC 15693 ISO/ISC 18000-3 (Mode1) ISO/ISC 18000-3 (Mode3) ISO/ISC 14443A ISO/ISC 14444B ISO/ISC 18092 (Passive Mode) Ethernet Item Compliance Data transfer length MAC Address Anti-collision YES YES No No No Parameter IEEE802.3 10BASE-T/100BASE-TX MAX 256 Byte/１Packet 00-03-D1-XX-XX-XX Product ID Vender ID(TAKAYA CORP.) Connection Supported protocols Routing Connector One Connection At the same time ARP、ICMP、TCP/IP、TELNET(Only Configure) One Static Route LED BUZZER TCP/IP (Ethernet) 3 LED (red/green/ blue) 1 BUZZER Connector RJ-45 DC JACK EIAJ TYPEⅡ(CENTER PLUS) ※2：initialization Manual No.TDR-MNL-C202-A0-1-EN-100 15 TAKAYA RFID TR3 Series 4 Specifications Item Mechanical Dimensions data (W x D x H) Weight Installation Parameter 140 x 110 x 38.5mm (Protrusions except) approx. 270g M4 Screw Screw is not included. Supply Voltage Current consumption Carrier off Power down mode Consumption 0 to 40 degree Electrical data Power Ambient Conditions Temperature Operating range Humidity Operating range Temperature Storage range Humidity Storage range AC Adaptor TR3-PWR-5V-1 RFID Sticker SEL41400L CD-ROM CDROM-TR3MNL Accessories Manual No.TDR-MNL-C202-A0-1-EN-100 Specifications 4.3 TR3XM-SN01 ：5V±10% ：approx. 380mA ：approx. 240mA ：approx. 230mA ：max 2.5W 30 to 80%RH 0 to 55 degree 30 to 80%RH 16 1 sheet TAKAYA RFID TR3 Series 5.1 5 Accessories AC Adapter(TR3-PWR-5V-1) 5 Accessories 5.1 AC Adapter(TR3-PWR-5V-1) ■ Specifications Specifications Item Applicable EMI Standards COMPLY SAFETY STANDARDS RoHS AC INPUT VOLTAGE FREQUENCY DC OUTPUT DC OUTPUT VOLTAGE RANGE LOAD CURRENT OUTPUT PLUG TYPE Mechanical Wight data Dimensions Cable length Ambient Temperature Conditions Operating range Humidity Operating range Temperature Storage range Humidity Storage range Parameter VCCI CLASS B, FCC class B, CISPR 22 class B UL60950-1, PSE EU RoHS(2002/95/EC) Support AC100V to AC240V 50 to 60Hz DC5.0V±5% 2.0A CENTER PLUS EIAJ TYPE II approx. 110g 60(W) x 44(D) x 26.5(H)mm (Cords are not included) approx. 1800mm 0 to 40 degree 5 to 95%RH -20 to 65 degree 5 to 95%RH ■ Dimension Unit：mm )is Recommended Dimension Manual No.TDR-MNL-C202-A0-1-EN-100 17 TAKAYA RFID TR3 Series 5.2 5 Accessories RS232C Cross-cable(CB-232C-2) 5.2 RS232C Cross-cable(CB-232C-2) ■ Specifications Specifications RoHS Connector screw Cable length Connection Parameter EU RoHS(2002/95/EC) Support D-sub 9Pin Inch screw approx. 1.8m Cross-cable ■ Dimension (1800) Unit：mm )is Recommended Dimension Manual No.TDR-MNL-C202-A0-1-EN-100 18 TAKAYA RFID TR3 Series 5.3 5 Accessories USB Cable(GH-USB20/1.8M) 5.3 USB Cable(GH-USB20/1.8M) ■ Specifications Specifications RoHS Connector Cable length Parameter EU RoHS(2002/95/EC) Support USB(A)-USB(B) approx. 1.8m ■ Dimension (1800) Unit：mm )is Recommended Dimension Manual No.TDR-MNL-C202-A0-1-EN-100 19 TAKAYA RFID TR3 Series 5.4 5 Accessories RFID Sticker (SEL41400L) 5.4 RFID Sticker (SEL41400L) φ18mm 本ステッカは、医療機器装着 者に対し、RFID の電波が出 ていることを明示するため のものです。 アンテナが装置等に組み込 まれる場合、RFID 機器の本 体外部からよく見える位置 （アンテナ付近）に貼り付け ることを推奨しています。 Manual No.TDR-MNL-C202-A0-1-EN-100 20 TAKAYA RFID TR3 Series 6 Maintenance This product is mainly used in electronic components and semiconductors. Therefore, the long-term stable operation, the environment and conditions are expected to defect, as shown below. • Device degradation due to overvoltage and overcurrent. • Device degradation due to high temperature and long-term stress. • Poor contact of the connector and cause deterioration of insulation by moisture or dust. • Connector corrosion by corrosive gases. In order to use this product at its best, please conduct routine or periodic inspections. Item Maintenance Criteria Temperature Temperature Operating range 0 to 55 degree Humidity Humidity Operating range 30 to 80%RH Ambient Enclosure conditions Check the dusty None rating Corrosive Check the corrosion None Input Check the voltage Power Input Voltage : DC5V±10% Voltage Check the Voltage fluctuation fluctuation Check the Screw Product Checking and verifying Attachment Check the Connector Cable Check the Cable break None Performance Check the Performance Work Manual No.TDR-MNL-C202-A0-1-EN-100 21 TAKAYA RFID TR3 Series Revision History Revision code 1.00 Date 2012/03/08 Revised contents Original production Manual No.TDR-MNL-C202-A0-1-EN-100 22 TAKAYA RFID TR3 Series [URL] [Mail] http://www.takaya.co.jp/ rfid@takaya.co.jp 23
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Format : application/pdf Title : Microsoft Word - TR3XM-SX01-EN-100.doc Creator : HKimura Create Date : 2012:03:15 09:53:21+09:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2012:03:15 09:53:21+09:00 Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:78f7c67a-36f3-4404-9db5-84ae4d68c554 Instance ID : uuid:8b7971f5-25d6-4322-9ee2-74b1a4d414ad Page Count : 28 Author : HKimuraEXIF Metadata provided by EXIF.tools