TCL Communication BC04 Door & Window Sensor User Manual LIFESENSE QG US CJB1H9002AAA v0 1 170110

Download:
Mirror Download [FCC.gov]
Document ID	3264091
Application ID	R+TAhM49PP19WHBoDn+2mg==
Document Description	LIFESENSE QG US CJB1H9002AAA v0.1-170110
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	55.55kB (694341 bits)
Date Submitted	2017-01-18 00:00:00
Date Available	2017-01-21 00:00:00
Creation Date	2017-01-10 15:33:36
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-01-10 15:33:37
Document Title	LIFESENSE QG US CJB1H9002AAA v0.1-170110
Document Creator	Adobe InDesign CS6 (Windows)

Quick Start Guide
CJB1H9002AAA
What's In The Box?
ick
Qu
LIFESENSE x 1
uid
rt g
sta
Quick Start Guide x 1
Double-sided tape x 1
Specification
Product name
LIFESENSE
Model name
DS01
Operating frequency
2.4 GHz
Transmitted power
8±2dbm
Battery model
CR2032
Battery life
>2 years
Installation distance
<20mm
Getting to Know Your LIFESENSE
The LIFESENSE sensor is an open/closed sensor for indoor use. With
this device, you can monitor the open/closed status of any door or
window in your home, garage or cabinet, for example.
Note: This device requires a LIFECONNECT in order to work.
Magnet
LED indicator
Reset hole
LED indicators
Flashing blue
Searching for LIFECONNECT
Constant blue
Connected to network
Flashing red
Low battery
Adding Your LIFESENSE
1. Make sure that the LIFECONNECT is connected with your router.
2. Open your LIFE App, log in to your account and select “+” in the
App. Follow the on-screen instructions in the App to add and
configure your LIFESENSE.
3. Open the LIFESENSE and remove the battery isolation tag found
in the device.
Note: If the connection fails after removing the tag, use a needle to press the
LIFESENSE reset hole until the blue LED turns on. The LIFESENSE LED will
flash blue while attempting to connect. Then select “+” in the LIFE App.
Installing Your LIFESENSE
Magnet
Sensor
1. Remove the protective film of the double-sided tape.
2. Mount the sensor on your door/window frame and the magnet on
the door/window itself. (Ensure that the gap between the magnet
and the sensor is less than 20mm.)
Notes:
• Apply the double sided tape to a clean and dry surface.
• Your LIFESENSE should be as close as possible to your LIFECONNECT
while the connection is being made. Within 5 metres is optimal.
Disconnecting from current network
If you want to remove the LIFESENSE from your current network,
use one of the following two methods:
• Long press the reset hole until the LED light flashes blue.
• Remove from the App as follows:
1. Launch the LIFE App.
2. Select LIFESENSE and open the homepage.
3. Select “Remove LIFESENSE” from the popup menu.
Replacing Battery
To replace the battery, open your LIFESENSE and insert a new
CR2032 battery.
②
①
③
FAQ
1.
Q: How long will my LIFESENSE work for?
2.
A: Your LIFESENSE uses a coin cell battery, with a lifespan of
up to 2 years. (based on 10 open/closed occurrences per day;
battery life will vary according to the level of usage).
Q: Can my LIFESENSE be used outside?
3.
4.
A: The LIFESENSE is for indoor use only.
Q: Can I control the opening and closing of automatic windows and doors using my LIFESENSE?
A: Your LIFESENSE does not support control over the opening
and closing of automatic windows and doors.
Q: Why can't my LIFESENSE be stuck firmly to the window or
door?
A: Wipe clean the place you want to stick the device with a
wet towel, allow to dry and then reapply the double-sided tape.
Safety and Use
Electronic Devices
Turn off your device near high-precision electronic devices. The
wireless device may affect the performance of these devices.
Such devices include hearing aids, pacemakers, fire alarm systems,
automatic gates, and other automatic devices. If you are using an
electronic medical device, consult the device manufacturer to
confirm whether radio waves affect its operation.
Hospitals
Pay attention to the following points in hospitals or health care
facilities:
• Do not take your wireless device into the operating room, intensive care unit, or coronary care unit.
• Do not use your wireless device at places for medical treatment
where wireless device use is prohibited.
Storage Environment
• Do not place magnetic storage media such as magnetic cards and
floppy disks near the wireless device. Radiation from the wireless
device may erase the information stored on them.
• Do not put your wireless device and other accessories in contain10
ers with strong magnetic fields, such as an induction cooker or a
microwave oven. Otherwise, circuit failure, fire, or explosion may
occur.
• Do not leave your wireless device in a very hot or cold place.
Otherwise, malfunction of the product, fire, or explosion may occur.
• Do not subject your wireless device to serious collision or shock.
Otherwise, wireless device malfunction, overheating, fire, or explosion may occur.
Child Safety
• Put your wireless device in places beyond the reach of children.
Do not allow children to use the wireless device without guidance.
• Do not allow children to put the device in their mouths.
• Do not allow children to touch small fittings. Otherwise, suffocation or choking could occur if they are swallowed.
Operating Environment
• The wireless device is not water-resistant. Keep it dry. Protect
the wireless device from water or vapour. Do not touch the wireless device with a wet hand. Otherwise, short-circuit, malfunction of the product or electric shock may occur.
11
• Do not use the wireless device in dusty, damp and dirty places
or within magnetic fields. Otherwise, malfunction of the circuitry
may occur.
• The wireless device may interfere with nearby TV sets, radios and
PCs.
• In accordance with international standards for radio frequency
and radiation, use wireless device accessories approved by the
manufacturer only.
Traffic Safety
When driving, do not use the wireless device.
• When switched on, this device emits electromagnetic waves that
can interfere with the vehicle’s electronic systems such as ABS
anti-lock brakes or airbags. To ensure that there is no problem,
do not place this device on top of the dashboard or within an
airbag deployment area.
• Check with your car dealer or the car manufacturer to make sure
that the dashboard is adequately shielded from this device RF
energy.
Conditions of Use
• Indoor use only.
• Do not allow your devicve to be exposed to adverse weather or
12
•
•
•
•
•
•
•
•
•
•
environmental conditions (moisture, humidity, rain, infiltration of
liquids, dust, sea air, etc.).
When this device is switched on, it should be kept at least 20 cm
from the body.
When this device is switched on, it should be kept at least 15 cm
from any medical device such as a pacemaker, a hearing aid or
insulin pump, etc.
When replacing the cover, please note that this device may contain substances that could create an allergic reaction.
Do not paint it.
The manufacturer’s recommended operating temperature range
is 0°C to +45°C.
Always handle this device with care and keep it in a clean and
dust-free place.
Clean this device with a dry cloth only.
Do not attempt to disassemble or repair this device or its accessories.
Do not drop, throw or bend this device.
Do not let children use this device and/or play with the this device and accessories without supervision.
13
Certification
This symbol on the device means that these products must
be taken to collection points at the end of their life:
- Municipal waste disposal centres with specific bins for
these items of equipment.
- Collection bins at points of sale.
They will then be recycled, preventing substances being disposed
of in the environment and allowing their components to be reused.
In European Union countries:
These collection points are accessible free of charge.
All products with this sign must be brought to these collection points.
In non European Union jurisdictions:
Items of equipment with this symbol are not to be thrown into
ordinary bins if your jurisdiction or your region has suitable recycling
and collection facilities; instead they are to be taken to collection
points for them to be recycled.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCRDING TO
THE INSTRUCTIONS.
14
Radio Waves
THIS DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to
radio-frequency (RF) energy. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on standards that were
developed by independent scientific organizations through periodic
and thorough evaluation of scientific studies. These guidelines
include a substantial safety margin designed to ensure the safety of
all persons, regardless of age and health.
The World Health Organization (WHO) considers that present
scientific information does not indicate the need for any special
precautions for use of wireless devices. If individuals are concerned,
they might choose to limit their own or their children’s RF exposure
by limiting the length of use to keep device away from the head
and body. Additional WHO information about electromagnetic fields
and public health are available on the following website: http://www.
who.int/peh-emf.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
15
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna;
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected;
- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
For the receiver devices associated with the operation of a licensed
radio service (e.g. FM broadcast), they bear the following statement:
This device complies with Part 15 of the FCC Rules and Innovation,
Science and Economic Development Canada licence-exempt RSS
standard(s).
16
Operation is subject to the following two conditions:
- This device may not cause harmful interference;
- This device must accept any interference received, including
interference that may cause undesired operation.
Your device is equipped with a built-in antenna. For optimal
operation, you should avoid touching it or degrading it.
Please note by using the device some of your personal data may
be shared with the main device. It is under your own responsibility
to protect your own personal data, not to share with it with any
unauthorized devices or third party devices connected to yours.
For products with Wi-Fi features, only connect to trusted Wi-Fi
networks. These precautions will help prevent unauthorized access
to your device. Choose your apps and updates carefully, and install
from trusted sources only. Note that any data shared with TCL
Communication Ltd. is stored in accordance with applicable data
protection legislation. For these purposes TCL Communication
Ltd. implements and maintains appropriate technical and
organizational measures to protect all personal data, for example
against unauthorized or unlawful processing and accidental loss
or destruction of or damage to such personal data whereby the
measures shall provide a level of security that is appropriate having
regard to
17
- The technical possibilities available;
- The costs for implementing the measures;
- The risks involved with the processing of the personal data, and;
- The sensitivity of the personal data processed.
You can access, review and edit your personal information at any
time by logging into your user account, visiting your user profile or by
contacting us directly. Should you require us to edit or delete your
personal data, we may ask you to provide us with evidence of your
identity before we can act on your request.
Innovation, Science and Economic Development Canada (ISEDC)
Notice
This device complies with Innovation, Science and Economic
Development Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
- This device may not cause interference, and;
- This device must accept any interference, including interference
that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Innovation, Science and Economic Development Canada (ISEDC)
Radiation Exposure Statement
18
Lisense
FCC: 2ACCJBC04
Warranty
The device is warranted against any deviation from technical
specifications for a period of twelve (12) (1) months from the date
specified on your original invoice.
Batteries and accessories sold with your device are also warranted
against any defect which may occur during the first six (6) months
from the date of purchase as shown on your original invoice.
Under the terms of this warranty, you must immediately inform your
vendor in case of a conformity defect on this device and present a
proof of purchase.
The vendor or repair centre will decide whether to replace or repair
this device, as appropriate.
Repaired or replaced versions of this device are warranted for ONE
(1) month unless there are statutory provisions to the contrary.
This warranty shall not apply to damage or defects to this device
due to:
1) Not following the instructions for use or installation.
(1)
The warranty period may vary depending on your country.
19
2) Not being compliant with technical and safety standards applicable
in the geographical area where this device is used.
3) Improper maintenance of sources of energy, and of the overall
electric installation.
4) Accidents or consequences of theft of the vehicle in which this
device is transported, acts of vandalism, lightning, fire, humidity,
infiltration of liquids, inclement weather.
5) Connecting to or integrating into this device any equipment not
supplied or not recommended by the manufacturer.
6) Any servicing, modification or repair performed by individuals
not authorised by the manufacturer, the vendor or the approved
maintenance centre.
7) Use of this device for a purpose other than that for which it was
designed.
8) Malfunctions caused by external causes (e.g., radio interference
from other equipment, power voltage fluctuations).
9) Faulty connections resulting from unsatisfactory radio
transmission or caused by the absence of radio relay coverage.
Warranty is also excluded for this device on which markings or serial
numbers have been removed or altered.
20
The LIFECONNECT serial number (SN) should be reported together
with this device for repairs. The serial number (SN) can be found on
the label on the back of the device.
This device is also warranted against hidden defects (defects inherent
in the design, manufacture, etc.).
There are no other express warranties other than this printed limited
warranty, expressed or implied, of any nature whatsoever.
In no event shall the manufacturer be liable for incidental or
consequential damages of any nature whatsoever, including but
not limited to trading loss, commercial loss, to the full extent those
damages can be disclaimed by law. Some countries/states do not
allow the exclusion or limitation of incidental or consequential
damages, or limitation of the duration of implied warranties, so the
preceding limitations or exclusions may not apply to you.
All rights reserved © 2017 TCL Communication LTD.
Address: Room 1910-12A, Tower 3, China HK City, 33 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2017:01:10 15:33:36+08:00
Metadata Date                   : 2017:01:10 15:33:37+08:00
Modify Date                     : 2017:01:10 15:33:37+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:efe5aee4-c7c2-4ad8-9b99-501a977b199b
Original Document ID            : xmp.did:07F0DCB31C0CE611901DC7E972B5B2F8
Document ID                     : xmp.id:F28C760F07D7E6118327870098BB5132
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:F18C760F07D7E6118327870098BB5132
Derived From Document ID        : xmp.did:3379DDB500D7E611BA37F75400E2B09B
Derived From Original Document ID: xmp.did:07F0DCB31C0CE611901DC7E972B5B2F8
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2017:01:10 15:33:36+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 21
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools