TCL Technoly Electronics 01 WIFI Module User Manual MT WN713NM SPECIFICATIONS

TCL Technoly Electronics (Huizhou) Co., Ltd. WIFI Module MT WN713NM SPECIFICATIONS

MT-WN713NM_User manual

Download: TCL Technoly Electronics 01 WIFI Module User Manual MT WN713NM SPECIFICATIONS
Mirror Download [FCC.gov]TCL Technoly Electronics 01 WIFI Module User Manual MT WN713NM SPECIFICATIONS
Document ID1705806
Application ID6Wiquu8+t4+VYI2QBueP+Q==
Document DescriptionMT-WN713NM_User manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize37.59kB (469895 bits)
Date Submitted2012-05-24 00:00:00
Date Available2012-05-27 00:00:00
Creation Date2012-05-09 11:50:08
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2012-05-09 13:53:04
Document TitleMicrosoft Word - MT-WN713NM SPECIFICATIONS.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

Specifications of 802.11 b/g/n Wireless USB Module
SPECIFICATIONS
802.11 b/g/n Wireless USB Module
(USB Host Power Is 3.3V)
Ver. 2.0
Date: 10/4/2012
Page 1 of 12
Specifications of 802.11 b/g/n Wireless USB Module
Contents
Device Overall Description ....................................................... 3
Features ..................................................................................... 3
Specification Compliance .......................................................... 3
Block Diagram .......................................................................... 4
Channel Assignment .................................................................. 4
Security ...................................................................................... 5
Certification............................................................................... 5
Software & OS support .............................................................. 5
Operating Conditions ................................................................ 5
RF Characteristics .................................................................... 6
Mechanical Drawing ................................................................. 7
Antenna Connector .................................................................... 8
LED Indication .......................................................................... 8
Page 2 of 12
Specifications of 802.11 b/g/n Wireless USB Module
Device Overall Description
The WN713NM is designed to provide wireless LAN function on a small form factor with
USB interface. The wireless LAN function is based on Ralink RT5370 MAC/BBP/RF
controller and high gain power amplifier, fully comply with current draft IEEE 802.11n
and IEEE 802.11 b/g standards.
Features
Ralink RT5370 MAC/BBP/RF Controller
1T1R Modes
11b: 1,2,5.5,11Mbps
11g: 6,9,12,18,24,36,48,54Mbps
11n: Legacy and High Throughput Modes, Support 20/40MHz Bandwidth
MCS0~7(150Mbps PHY Rate Rate)
Reverse Direction Data Flow and Frame Aggregation
WEP 64/128, WPA, WPA2, TKIP, AES
QoS-WMM, WMM-PS
WPS, PIN, PBC
Multiple BSSID Support
Low Power with Advanced Power Management
Specification Compliance
802.11n Draft3.0
802.11b/g
802.11e
802.11i
802.11j
USB2.0
Page 3 of 12
Specifications of 802.11 b/g/n Wireless USB Module
Block Diagram
RT5370:Highly integrated MAC/BBP and 2.4GHz RF single chip
Channel Assignment
2.4GHz Channel Support
Channel
Frequency
FCC (US)
IC(CA)
ETSI (EU)
Japan (JP)
2412MHz
2417MHz
2422MHz
2427MHz
2432MHz
2437MHz
2442MHz
2447MHz
2452MHz
10
2457MHz
11
2462MHz
12
2467MHz
13
2472MHz
14
2484MHz
KEY:
US = United States, CA = Canada, EU = European Countries (except France and Spain) ,JP = Japan
Many countries and region are currently revising the channel assignment.
X = Supported
Page 4 of 12
Specifications of 802.11 b/g/n Wireless USB Module
Security
Complete Security Features - WEP 64/128, WPA, WPA2, 802.1x, and 802.11i
Cisco CCS Compliant
Certification
ٛ Cisco CCX
Software & OS support
Operating System
Driver
Windows 2000
Available
Windows XP 32/64
Available
Windows Vista 32/64
Available
Windows 7 32/64
Available
Linux
Available
MAC OS
Available
Operating Conditions
Voltage Range
5 +/0.3V
Operating Temperature Range
-10°C - 65°C
Storage Temperature Range
-10°C - 85°C
Relative Humidity during Operating
Max. 95% (Non-Condensing)
Relative Humidity during Storage
Max. 95% (Non-Condensing)
Page 5 of 12
Specifications of 802.11 b/g/n Wireless USB Module
RF Characteristics
RF Characteristics
PC Interface
Internal Antenna Impedance
Operating Temperature Range
Minimum
Maximum
Units
+65
℃
Storage Temperature Range
-20
+85
℃
Supply Voltage
RX Supply Current (11b 11MBps)
Power Consumption
RX Supply Current (11g 54Mbps)
Power Consumption
RX Supply Current (11n 150Mbps)
Power Consumption
TX Supply Current (11b 1MBps)
Power Consumption
TX Supply Current(11g 6Mbps)
Power Consumption
TX Supply Current (11n 15Mbps)
Power Consumption
Radio off Current
Power Consumption
RX Sensitivity(11b,11Mbps)
RX Sensitivity(11g,54Mbps)
RX Sensitivity (11n,150Mbps)
TX Output Power(11b,11M)
TX Output Power(11g,54Mbps)
TX Output Power(11n,MCS0)
TX Output Power(11n,MCS7)
TX Spectral Mask (CCK)
TX Spectral Mask (OFDM)
TX Spectral Mask (11n,20M)
TX Spectral Mask (11n,40M)
Preamble Length
4.7
5.3
mA
mWatts
mA
mWatts
mA
mWatts
mA
mWatts
mA
mWatts
mA
mWatts
mA
mWatts
dBm
dBm
dBm
dBm
dBm
dBm
dBm
Page 6 of 12
Typical
USB 2.0
50 ohms
5.0
140
462
150
495
190
627
265
875
255
842
245
809
40
132
-86
-71
-63
17
15
14
14
PASS
PASS
PASS
PASS
Long/Short
Specifications of 802.11 b/g/n Wireless USB Module
Mechanical Drawing
Page 7 of 12
Specifications of 802.11 b/g/n Wireless USB Module
Antenna Connector
Connector
Vendor
Part#
Antenna*1
Hirose
On Board PCB Antenna
Host Interface Pin Definition
FAA pin: WLAN RF Disable/Enable
Vcc
USB Data-
USB Data +
GND
WLAN LED LINK
Note:
Pin 6 is Low active for WLAN LED Link.
Pin 1 is Low voltage to disable RF function
LED Indication
LED status
WLAN card activity
LED on
Associated, and authenticated but not transmitting or receiving
LED Slow Blink
Scanning for AP
LED Intermittent Blink
Activity proportional to transmitting/receiving speed
LED off
Radio off
Page 8 of 12
Specifications of 802.11 b/g/n Wireless USB Module
COMPLIANCES
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
Page 9 of 12
Specifications of 802.11 b/g/n Wireless USB Module
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The end host device use this module should marked "Contain FCC ID:ZVA01"
in the label of the host device.
Page 10 of 12

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:05:09 13:53:04+08:00
Create Date                     : 2012:05:09 11:50:08+08:00
Metadata Date                   : 2012:05:09 13:53:04+08:00
Format                          : application/pdf
Title                           : Microsoft Word - MT-WN713NM SPECIFICATIONS.doc
Creator                         : Administrator
Document ID                     : uuid:998716bf-8bc8-4104-9342-07308a7d1801
Instance ID                     : uuid:174c3d99-8232-40f5-8edf-6aae4f1db185
Has XFA                         : No
Page Count                      : 10
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ZVA01

Navigation menu