TCL Technoly Electronics PS000024 Auvio Rugged Stereo Bluetooth Speaker User Manual
TCL Technoly Electronics (Huizhou) Co., Ltd. Auvio Rugged Stereo Bluetooth Speaker
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3071236 |
| Application ID | Dgf6bwHnlooMbPwdqQgwbg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 130.79kB (1634910 bits) |
| Date Submitted | 2016-07-21 00:00:00 |
| Date Available | 2016-07-21 00:00:00 |
| Creation Date | 2016-07-05 11:53:08 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-07-05 11:53:15 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2015 (Windows) |
We hope you enjoy your AUVIO Rugged Stereo Bluetooth Speaker with True Wireless stereo sound capability. Tough and water-resistant, this speaker is ideal for outdoors. It's also designed with a built-in mic and speakerphone so you can take calls as well as listen to music from your smartphone. Please read this user's guide before using your new speaker. Package Contents •• Speaker Controls Overview +/− Turn on/off speaker Adjust volume LED Indicator Button Start Bluetooth pairing Disconnect Bluetooth pairing Volume up/ down • USB Charging Cable Press Turn on/ off speaker Red - Charging Flashes red slowly - low battery Blue - Outdoor EQ is selected. Off - Indoor EQ ...and hold 2 sec +/ − ...quickly, or press and hold ×1 Calls •• User’s Guide Mic Specifications Battery................. Rechargeable 7.4V, 2200mAh lithium polymer Battery Charging Voltage....................................................DC 5V, 2A Charging Time.............................................................. approx. 4 hours Play Time............................................................................. up to 6 hours Frequency Response..............................(speaker) 120 Hz – 20 KHz Output Power.................................................................................2 × 8W Impedance.................................................................................... 4 Ohms Driver.................................................. 2 × 1.5 in" (38mm) neodymium Bluetooth Protocol...............V4.2 with A2DP, AVRCP, HFP Profile Operation Range................................................................. 33 ft. (10m) Water resistance................................................................................IPX5 Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document. Answer/ end call Call functions on speakerphone Start/disconnect Bluetooth pairing Answer, end, reject and switch between calls LED Indicator Flashes quickly - pairing / incoming call, connecting Bluetooth / True Wireless Lights steadily - Bluetooth connected, engaged in call Bottom View Connect the included USB charging cable here to charge. Select outdoor/indoor EQ ...and hold 2 sec ×1 True Wireless (TW) Notes: •• You can charge the speaker and use it at the same time. •• When the battery is low, the I LED flashes red slowly, and the speaker will eventually automatically turn off. Lithium Battery Notes: •• Charge batteries on a fireproof surface away from flammable items or liquids. Follow the instructions for charging the speaker and do not charge longer than recommended. •• Recycle lithium batteries. Do not dispose of them in the trash. Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. •• If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention. Pairing to a Bluetooth Device 1. Press and hold I for 2 seconds to turn on the speaker. Activate on first speaker Activate on 2nd speaker ×1 Deactivate True Wireless ...and hold 2 sec Swap left/ right channel Charge Your Speaker 2. Unplug after charging, and firmly replace the cover to protect the jacks from water, dust or dirt. For line-in listening option. AUX I LED lights red during charging and turns off when fully charged. AUX 4000770 User’s Guide Activate / deactivate True Wireless Swap L/R channels when two speakers are connected LED Indicator Lights steadily - True Wireless activated Reject an incoming call Switch to an incoming call and end the current call EQ 1. Lift the cover on the bottom to access the jacks. Then connect the supplied charging cable to the DC IN jack and a USB power source. DC IN rugged stereo bluetooth ® speaker 4000770_UG_EN.indd All Pages Notes: To... The / LED flashes blue quickly as your speaker searches for Bluetooth devices. 2. When pairing to a device for the first time, press and hold / for 2 seconds to start Bluetooth pairing. 3. Activate your device’s Bluetooth function (refer to your device’s user’s guide). When your device locates AUVIO BTS800, select this from the device list. When paired, the / indicator lights blue steadily. 4. Use the controls on your device to play music. To adjust volume, you can use the speaker's / buttons, or your device's controls. +− •• The speaker will disconnect and power down from your device if they are too far apart, or left idle. To reconnect, move the speaker closer to the device within 5 minutes. •• The last volume setting used on the speaker is memorized after switching off. •• Music playback is paused during call functions and resumes when the call is ended. Clear Bluetooth Pairing Your speaker automatically reconnects to the most recently paired device when switched on. If you want to change to other Bluetooth devices, or in case of problems pairing, press and hold I and for 3 seconds. Multipoint Connection This speaker is multipoint-enabled. This allows you to easily access and play music or take a call through the speaker from either one of two connected Bluetooth devices. Using True Wireless Mode To play your music from your smartphone or other Bluetoothenabled device, for best sound performance you'll need an additional AUVIO BTS800 speaker. Conveniently, there is no need to pair the second speaker. True Wireless Activation Before you start activation or when using True Wireless mode, make sure of the following: •• Your first speaker is paired before you setup True Wireless mode. •• Both speakers are on and in stop mode. •• If you are using multipoint connection, you need to turn off multipoint on one of your 2 Bluetooth devices. 1. Press the button on one speaker. The flashes quickly. 2. On another speaker, press the LED flashes quickly. button, the LED 3. When True Wireless is successfully activated, the / LEDs light steadily on both your speakers. 2. There is no need to switch off the speaker to pair your 2 seconds to start second device. Press and hold / Bluetooth pairing your second device. Bluetooth status on your first device will automatically disconnect. 4. To swap left/right channel sound on your two speakers, press and hold button for 2 seconds on either speaker. 3. After your second device is successfully paired and connected, to enjoy multipoint, go to the Bluetooth menu on your first device to reactivate Bluetooth connection status. Both your devices are now connected. 5. To exit True Wireless, press the speaker. and button on either Notes: •• Smart Power Off: During True Wireless playback, press and hold I for 2 seconds on either speaker to switch off both speakers simultaneously. •• Troubleshooting TW Activation: In case of difficulty activating, turn off each speaker. Then switch the first speaker on again, followed by the second speaker, and start playing a song. Wait a few seconds to hear if True Wireless has been activated. If not, repeat True Wireless Activation and complete steps 1-3 above within 3 minutes. Connecting with AUX For device players without Bluetooth functionality, use an ⅛" (3.5mm) audio cable (not included) to connect to the speaker’s AUX jack. Note: Bluetooth functionality is automatically deactivated when playing music via AUX port. Resetting the Speaker 1. To use multipoint, make sure you pair each of your devices separately. See Pairing a Bluetooth Device. 5. During playback, press I to toggle between two EQ options for indoor/ outdoor listening. •• Smart True Wireless: Once activated, True Wireless is memorized by your speakers. True Wireless is the default playback mode when you next switch on the two speakers. In case the speaker's buttons are not functioning properly during operation, press and hold and at the same time for 5 seconds to reset and switch off the speaker. Any previous TW activation will not be lost. FCC Information Limited Warranty Go to www.radioshack.com/help for details. RadioShack Customer Relations 300 RadioShack Circle, Fort Worth, TX 76102 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult your dealer or an experienced radio/TV technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by General Wireless Operations Inc. is under license. Complies with the European Union’s “Restriction of Hazardous Substances Directive,” which protects the environment by restricting specific hazardous materials and products. www.radioshack.com © 2016 General Wireless Operations Inc. All rights reserved. AUVIO is a registered trademark used by General Wireless Operations Inc. dba RadioShack. 07A16 4000770 Printed in China 7/5/2016 11:53:15 AM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00 Create Date : 2016:07:05 11:53:08+08:00 Metadata Date : 2016:07:05 11:53:15+08:00 Modify Date : 2016:07:05 11:53:15+08:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:aa1a2f93-6a96-4dd9-aea2-8ca74582fe51 Original Document ID : xmp.did:97D214042692E411B51FE724B8DB49D7 Document ID : xmp.id:3a395513-7813-9148-82e9-4a4c7594bb58 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5f46068b-7ad9-a440-bd49-537b53fcd496 Derived From Document ID : xmp.did:FC72E7F84717E6119BEEDEECE9BC26DF Derived From Original Document ID: xmp.did:97D214042692E411B51FE724B8DB49D7 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:07:05 11:53:08+08:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 1 Creator : Adobe InDesign CC 2015 (Windows)EXIF Metadata provided by EXIF.tools