TCL Technoly Electronics PS000025 Realistic Stereo Bluetooth Speaker User Manual
TCL Technoly Electronics (Huizhou) Co., Ltd. Realistic Stereo Bluetooth Speaker
User Manual
We hope you enjoy your REALISTIC Stereo Bluetooth Speaker with True Wireless stereo sound capability. Sleek and water resistant, this speaker is also designed with a built-in mic and speakerphone so you can take calls as well as listen to music from your smartphone. Please read this user's guide before using your new speaker. Package Contents Activate / deactivate True Wireless Select L/R channels when two speakers are connected Indicator Lights steadily - True Wireless activated Controls Overview +/− Answer, end, reject and switch between calls Indicator Flashes quickly - receiving a call Lights steadily- during a call Adjust volume § Play / pause music AUX •• Speaker For line-in listening option, use an ⅛" (3.5mm) audio cable (not included). Note: Bluetooth functionality is automatically deactivated when playing music via AUX port. •• USB Charging Cable •• User’s Guide Specifications Battery........................... Rechargeable 7.4V 2200mAh lithium polymer Battery Charging Voltage.............................................................. DC 5V, 2A Battery Charging Time........................................................ approx. 4 hours Play Time....................................................................................... up to 6 hours Frequency Response....................................... (speaker) 120 Hz – 20 KHz Output Power........................................................................................10 W × 2 Impedance.............................................................................................. 4 Ohms Driver............................................................ 2 × 1.5 in. (38mm) neodymium Bluetooth Protocol.........................V4.2 with A2DP, AVRCP, HFP Profile Operation Range........................................................................... 33 ft. (10m) Microphone type...............................................................Echo cancellation Water resistance..........................................................................................IPX5 Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document. Enters Bluetooth pairing mode Clear Bluetooth pairing Indicator Flashes quickly - pairing Bluetooth, connecting True Wireless Flashes slowly - pairing time-out Lights steadily - Bluetooth connected Notes: To... Turn on/ off speaker Start Bluetooth pairing Disconnect Bluetooth pairing Button ...and hold 2 sec +/ − Volume up / down ...quickly, or press and hold Calls Answer / end call ×1 Reject an incoming call Switch to an incoming call and end the current call ...and hold 2 sec True Wireless Activate on first speaker Activate on 2nd speaker Deactivate True Wireless ×1 Swap left/ right channel Turn on/off speaker G Indicator Lights steadily - speaker is on Flashes quickly - incoming call Red - charging Press ...and hold 2 sec DC IN Connect the included USB charging cable here to charge. ...and hold 2 sec Charge Your Speaker 1. Lift the cover on the side to access the jacks. Then connect the supplied charging cable to the DC IN jack and a USB power source. G indicator lights red during charging and turns off when fully charged. stereo bluetooth ® speaker 2. Unplug after charging, and firmly replace the cover to protect the jacks from water, dust or dirt. 4000771 User’s Guide 4000771_UG_EN.061616.indd All Pages Using True Wireless Mode Notes: •• You can charge the speaker and use it at the same time. •• When the battery is low, the G indicator flashes red slowly, and the speaker will eventually automatically turn off. Lithium Battery Notes: •• Charge batteries on a fireproof surface away from flammable items or liquids. Follow the instructions for charging the speaker and do not charge longer than recommended. •• Recycle lithium batteries. Do not dispose of them in the trash. Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. •• If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention. Pairing a Bluetooth Device 1. Press and hold G 2 seconds to turn on the speaker. The G indicator lights. 2. Press and hold to enter pairing mode if your speaker doesn't enter automatically. The indicator flashes quickly as your speaker searches for Bluetooth devices. •• The speaker will disconnect from Bluetooth function and power down from your device if they are too far apart, or left idle. To reconnect, move the speaker closer to the device within 5 minutes. •• The last volume setting used on the speaker is memorized after switching off. True Wireless Activation •• Music playback is paused during call functions and resumes when the call ends. Before you start activation or when using True Wireless mode, make sure of the following: Clear Bluetooth Pairing •• Your first speaker is paired before you setup True Wireless mode. Your speaker automatically reconnects to the most recently paired device when switched on. If you want to change to other Bluetooth devices, or in case of problems with pairing, press and hold G and for 3 seconds. The indicator flashes quickly and the speaker starts searching for another Bluetooth device. •• If you are using multipoint connection, you need to turn off multipoint on one of your 2 Bluetooth devices. 1. Press the button on one speaker. The flashes quickly. Multipoint Connection 2. On another speaker, press the indicator flashes quickly. This speaker is multipoint-enabled. This allows you to easily access and play music or take a call through the speaker from either one of two connected Bluetooth devices. 3. When True Wireless is successfully activated, the indicators light steadily on both your speakers. 1. To use multipoint, make sure you pair each of your devices separately. See Pairing a Bluetooth Device. 3. Activate your device’s Bluetooth function (refer to your device’s user’s guide). When your device locates REALISTIC BTS1000, select this from the device list. When paired, the indicator lights steadily. 2. There is no need to switch off the speaker to pair your second device. Press and hold 2 seconds to start Bluetooth pairing your second device. Bluetooth status on your first device will automatically disconnect. 4. Use the controls on your device to play music. To adjust volume, you can use the speakers / buttons, or those on your device. 3. After your second device is successfully paired and connected, to enjoy multipoint, go to the Bluetooth menu on your first device to reactivate Bluetooth connection status. Both your devices are now connected. +− To play your music from your smartphone or other Bluetoothenabled device, for best sound performance you'll need an additional REALISTIC 4000771 speaker. Conveniently, there is no need to pair the second speaker. •• Both speakers are on and in stop mode. indicator button, the and 4. To swap left/right channel sound on your two speakers, press and hold button for 2 seconds on either speaker. 5. To exit True Wireless, press the speaker. button on either Notes: •• Smart Power Off: During True Wireless playback, press and hold G on either speaker for 2 seconds to switch off both speakers simultaneously. •• Smart True Wireless: Once activated, True Wireless is memorized by your speakers. True Wireless is the default playback mode when you next switch on the two speakers. •• Troubleshooting TW Activation: In case of difficulty activating, turn off each speaker. Then switch the first speaker on again, followed by the second speaker, and start playing a song. Wait a few seconds to hear if True Wireless has been activated. If not, repeat True Wireless Activation and complete steps 1-3 above within 3 minutes. Resetting the Speaker • Consult your dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Limited Warranty Go to www.radioshack.com/help for details. In case the speaker's buttons are not functioning properly during operation, press and hold and at the same time for 5 seconds to reset and switch off the speaker. Any previous TW activation will not be lost. RadioShack Customer Relations 300 RadioShack Circle, Fort Worth, TX 76102 FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by General Wireless Operations Inc. is under license. Complies with the European Union’s “Restriction of Hazardous Substances Directive,” which protects the environment by restricting specific hazardous materials and products. www.radioshack.com © 2016 General Wireless Operations Inc. All rights reserved. REALISTIC is a registered trademark used by General Wireless Operations Inc. dba RadioShack. 06A16 4000771 Printed in China 10 6/24/2016 10:29:25 AM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00 Create Date : 2016:06:24 10:29:18+08:00 Metadata Date : 2016:06:24 10:29:25+08:00 Modify Date : 2016:06:24 10:29:25+08:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:6875ec13-27f4-41af-ae24-610dd84a1456 Original Document ID : xmp.did:97D214042692E411B51FE724B8DB49D7 Document ID : xmp.id:121b2be6-6a79-fc44-b288-2519400d9da9 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:700dd22f-26dd-d04d-854a-cd1097830782 Derived From Document ID : xmp.did:628C40BA8FFFE511ADFD917DCA70DAB9 Derived From Original Document ID: xmp.did:97D214042692E411B51FE724B8DB49D7 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:06:24 10:29:18+08:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 1 Creator : Adobe InDesign CC 2015 (Windows)EXIF Metadata provided by EXIF.tools