TENDA TECHNOLOGY DH301 Wireless N300 ADSL2+ High Power Modem Router User Manual
SHENZHEN TENDA TECHNOLOGY CO., LTD. Wireless N300 ADSL2+ High Power Modem Router
Contents
- 1. Users Manual Part I
- 2. User Manual Part II
Users Manual Part I
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2548711 |
| Application ID | UnPvAJdTxaDCydVEFV7iPg== |
| Document Description | Users Manual Part I |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 324.52kB (4056465 bits) |
| Date Submitted | 2015-03-05 00:00:00 |
| Date Available | 2015-03-05 00:00:00 |
| Creation Date | 2017-10-17 02:28:58 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-17 02:28:58 |
| Document Title | 版æƒç”³æ˜Ž |
| Document Creator | Microsoft® Word 2013 |
| Document Author: | tenda22 |
Wireless N300 ADSL2+ High Power Modem Router Wireless N300 ADSL2+ High Power Modem Router Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. No part of this publication can be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the prior written permission of Shenzhen Tenda Technology Co., Ltd. If you would like to know more about our product information, please visit our website at http://www.tendacn.com. Disclaimer Pictures, images and product specifications herein are for references only. To improve internal design, operational function, and/or reliability, Tenda reserves the right to make changes to the products without obligation to notify any person or organization of such revisions or changes. Tenda does not assume any liability that may occur due to the use or application of the product described herein. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information and recommendations in this document do not constitute the warranty of any kind, express or implied. Technical Support Website: http://www.tendacn.com Telephone: (86 755) 2765 7180 Email: support@tenda.com.cn ii Wireless N300 ADSL2+ High Power Modem Router Contents Chapter 1 Get to Know Your Router ..................................................................................................................................... 1 1.1 What it does ............................................................................................................................................................ 1 1.2 Product Features ...................................................................................................................................................... 1 1.3 Package Contents .................................................................................................................................................... 2 Chapter 2 Hardware Install ................................................................................................................................................... 3 2.1 LED Indicators, Buttons and Interfaces .................................................................................................................. 3 2.2 Install the Device .................................................................................................................................................... 5 Chapter 3 Quick Internet Setup ............................................................................................................................................. 6 3.1 Log in to Web Manager........................................................................................................................................... 6 3.2 Internet Setup .......................................................................................................................................................... 6 3.2.1 ADSL Mode ................................................................................................................................................. 6 3.2.2 Ethernet Mode .............................................................................................................................................. 8 3.2.3 Test Internet Connectivity ............................................................................................................................ 9 Chapter 4 Advanced Settings .............................................................................................................................................. 10 4.1 Device Info............................................................................................................................................................ 11 4.1.1 Summary .................................................................................................................................................... 11 4.1.2 WAN........................................................................................................................................................... 12 4.1.3 Statistics ..................................................................................................................................................... 12 4.1.4 Route .......................................................................................................................................................... 14 4.1.5 ARP ............................................................................................................................................................ 14 4.1.6 DHCP ......................................................................................................................................................... 15 4.2 Advanced Setup..................................................................................................................................................... 15 4.2.1 Layer2 Interface ......................................................................................................................................... 15 4.2.2 WAN Service.............................................................................................................................................. 18 4.2.3 LAN ........................................................................................................................................................... 85 4.2.4 NAT ............................................................................................................................................................ 89 4.2.5 Security ...................................................................................................................................................... 95 4.2.6 Parental Control ......................................................................................................................................... 98 4.2.7 Bandwidth Control ................................................................................................................................... 100 4.2.8 Routing ..................................................................................................................................................... 101 4.2.9 DNS.......................................................................................................................................................... 104 4.2.10 DSL ........................................................................................................................................................ 109 4.2.11 UPnP ...................................................................................................................................................... 110 4.2.12 Print Server ............................................................................................................................................ 111 4.2.13 Storage Service....................................................................................................................................... 117 4.2.14 Interface Grouping ................................................................................................................................. 120 4.2.15 IP Tunnel ................................................................................................................................................ 123 4.2.16 Certificate ............................................................................................................................................... 125 4.2.17 Multicast................................................................................................................................................. 129 4.2.18 IPTV ....................................................................................................................................................... 130 4.3 Wireless ............................................................................................................................................................... 131 4.3.1 Basic ......................................................................................................................................................... 131 4.3.2 Security .................................................................................................................................................... 132 4.3.3 MAC Filter ............................................................................................................................................... 134 iii Wireless N300 ADSL2+ High Power Modem Router 4.3.4 Wireless Bridge ........................................................................................................................................ 136 4.3.5 Station Info ............................................................................................................................................... 137 4.4 Diagnostics .......................................................................................................................................................... 138 4.4.1 Diagnostics ............................................................................................................................................... 138 4.4.2 Ping test .................................................................................................................................................... 138 4.5 Management ........................................................................................................................................................ 139 4.5.1 Settings ..................................................................................................................................................... 139 4.5.2 System Log .............................................................................................................................................. 141 4.5.3 SNMP Agent ............................................................................................................................................ 142 4.5.4 TR-069 Client........................................................................................................................................... 143 4.5.5 Internet Time ............................................................................................................................................ 144 4.5.6 Access Control ......................................................................................................................................... 145 4.5.7 Update Firmware...................................................................................................................................... 147 4.5.8 Reboot ...................................................................................................................................................... 147 Appendix 1 Configure Your PC ........................................................................................................................................ 149 Windows 8 ................................................................................................................................................................ 149 Windows 7 ................................................................................................................................................................ 151 Windows XP ............................................................................................................................................................. 153 MAC ......................................................................................................................................................................... 154 Appendix 2 Join Your Wireless Network .......................................................................................................................... 156 Windows 8 ................................................................................................................................................................ 156 Windows 7 ................................................................................................................................................................ 157 Windows XP ............................................................................................................................................................. 158 MAC ......................................................................................................................................................................... 160 iPhone/iPad ............................................................................................................................................................... 162 Appendix 3 FAQs.............................................................................................................................................................. 164 Appendix 4 VPI/VCI List ................................................................................................................................................. 166 Appendix 5 Regulatory Compliance Information ............................................................................................................. 174 iv Wireless N300 ADSL2+ High Power Modem Router Chapter 1 Get to Know Your Router 1.1 What it does The Wireless N300 ADSL2+ High Power Modem Router provides you with an easy and secure way to set up a wireless home network with fast access to the Internet over a high-speed digital subscriber line (DSL). Complete with a built-in ADSL modem, it is compatible with all major ADSL Internet service providers. It offers wireless speeds of up to 300Mbps needed for demanding applications, such as large file transfers, streaming HD video, and multiplayer gaming. The unit comes with a wide range of premium features and applications such as IPv6, SNMP, Multicast, IP tunnel, ready share USB, IPTV service and parental controls, etc. Plus, with the router, you can access the Internet via the ATM interface or Ethernet interface. 1.2 Product Features Wireless N speeds up to 300 Mbps for streaming HD videos and online gaming in addition to basic Internet applications All-in-one device combines a built-in ADSL2+ modem, wired router, wireless router and switch Sharable USB lets you access and share files on an attached USB hard drive Sharable Printer lets you print from your Windows computer to a connected USB printer Advanced QoS helps prioritize media streaming and gaming applications for best entertainment experience Parental Control keeps your kids Internet experience safe using flexible and customizable filter settings One-touch WPS ensures a quick and secure network connection WEP and WPA/WPA2 are supported for advanced encryptions Compatibility: Works with all major ADSL Internet service providers (ISPs); backward compatible with 802.11b/g WiFi devices Interchangeable LAN/WAN ports to schedule the Ethernet port to function either as a LAN or a WAN port Interchangeable LAN/IPTV to schedule the Ethernet port to function either as a LAN or an IPTV port Optional Ethernet and ADSL Uplinks: Access the Internet via ADSL2+ Broadband Internet Service or an interchangeable LAN/WAN RJ45 port Multiple Internet Connection Types: Bridging, PPPoE, IPoE, PPPoA, IPoA, dynamic IP and static IP IPTV Service lets your surf the Internet while watching online TV 6000V lightning－proof design fits into lightning-intensive environment Strong driving capability up to 6.5Km transmission distance Wireless N300 ADSL2+ High Power Modem Router High ADSL speed up to 24Mbps downstream 1Mbps upstream Built-in firewall prevents hacker attacks Channel auto-select for optimum performance FDM technology enables telephoning, faxing and surfing activities to proceed simultaneously without mutual interference Other Advanced Features: IPv6, DDNS, virtual server, DMZ, port triggering, IP filter, MAC filter and UPnP, etc. Tenda Setup Wizard for easy and fast installation and configuration Tenda Green: Use hardware Power On/Off and software WiFi On/Off buttons to turn on and off power and WiFi to save energy when not in use 1.3 Package Contents Your box should contain the following items: Wireless N300 ADSL2+ High Power Modem Router Telephone Line Ethernet Cable ADSL Splitter Install Guide Power Adapter Resource CD If any of the parts are incorrect, missing, or damaged, keep the carton, including the original packing materials and contact the dealer for immediate replacement. Wireless N300 ADSL2+ High Power Modem Router Chapter 2 Hardware Install If you have not set up your new router using the Install Guide that comes in the box, this chapter walks you through the hardware install. To set up your Internet connection, see Chapter 3 Quick Internet Setup. 2.1 LED Indicators, Buttons and Interfaces Front Panel LED PWR SYS WLAN DSL Status Solid Off Description Power is supplied to the device. Power is not supplied to the device. Blinking System is functioning correctly. Solid/Off System is functioning incorrectly. Blinking Transmitting data via wireless Off Wireless is disabled. Solid Wireless is enabled. Slow Blinking Physical connection failure. Fast Blinking Synchronizing... Solid ADSL connection is established. Wireless N300 ADSL2+ High Power Modem Router 4/iTV Off 3/2 Blinking 1/WAN Solid Connection is established. Solid Client connected successfully. WPS Blinking Off Solid USB Off Solid INTERNET Blinking Off No connection established Transmitting data WPS LED starts blinking if you press the WPS button on the device or interface. No wireless clients are connected. WPS LED turns off after blinking for 2 minutes. Connection is successfully established on the USB port. Connection is not established on the USB port. Current client is connecting to the Internet; no data is transmitted via the Internet. Current client is connecting to the Internet; data is transmitted via the Internet. Current Internet client is not connecting to the Internet. Back Panel Button & Interface DSL 1/WAN 2/3 Description For connecting the router to the Internet via a phone cable provided by your ISP. LAN port or WAN port. When you access the Internet via the DSL, this port works as a LAN port which can be used to connect to a PC, switch, or a router; when you access the Internet via an Ethernet cable from your ISP directly, this port works as a WAN port. Note: It works as a LAN port by default. LAN port, used to cable the device to the local network devices such as computers. LAN port or IPTV port. When IPTV feature is disabled, it works as a LAN port which can be 4/iTV used to connect to a PC, switch or a router; when IPTV feature is enabled, it works as an IPTV port, and it can only be connected to a set-top box. Note: IPTV feature is disabled by default. USB RST/WPS Used to connect a USB device, such as a 3G USB modem, USB print server or storage service. Press it for 1-3 seconds to enable WPS-PBC feature; Press it for about 10 seconds to restore all configurations to factory defaults. Wireless N300 ADSL2+ High Power Modem Router DC ON/OFF Used to connect to the power adapter, which is included in the package. Power switch to turn the router on or off. 2.2 Install the Device Connect the included power adapter to your router and turn on the router. Connect your computer to your router. Connect your router to the Internet. Choose ADSL Mode or ETH Mode according to your actual Internet service type. With a telephone Simply connect the DSL line to the DSL port of your router. Use the splitter as a medium: 1) Connect the DSL line from the Internet side to the LINE port of the splitter; ADSL Mode (Phone cable access) Without a telephone 2) Connect the telephone with a phone cable to the PHONE port of the splitter; 3) Connect the MODEM port of the splitter and DSL port of your router via another phone cable. Do not go to Step 3 (connect the Ethernet cable to the LAN/WAN port) until you finish the ETH Mode (Ethernet cable access) Primary Setup of Internet connection type on the Web Management Homepage, i.e., finish settings in Ethernet Mode in Chapter 3 Quick Internet Setup >3.2 Internet Setup. Wireless N300 ADSL2+ High Power Modem Router Chapter 3 Quick Internet Setup This chapter instructs you to quickly set up your Internet connection. 3.1 Log in to Web Manager 1. Set your PC to Obtain an IP address automatically. For more information, see Appendix 1 Configure Your PC. 2. Launch a web browser and enter 192.168.1.1 to display the login window. 3. Enter admin in both the Login Username and Password fields if you access the router for the first time and then click Login to enter the home page. Tip If you change the login username and password and forget them, press the RST/WPS button on the device for about 10 seconds to reset the router, and then enter the home page with the default username and password “admin”. 3.2 Internet Setup 3.2.1 ADSL Mode 1. Link Type: Select ADSL. 2. Select your country. 3. Select your ISP. 4. VPI/VCI fields will be populated automatically if you select a correct country and ISP. 5. Select your Connection Type, and fill the relevant Internet information. 6. Secure your wireless network. (Strongly Recommended) 7. Click OK to apply your configurations. Wireless N300 ADSL2+ High Power Modem Router Depending on the type of connection, you are prompted to enter your ISP settings, as shown in the following table: Connection Type PPPoE/PPPoA Dynamic IP IPoE Description Enter the ISP user name and password. If you cannot locate this information, ask your ISP to provide it. No entries are needed. Enter the assigned IP address, subnet mask, and the IP address of your ISP’s primary Static IP DNS server. This information should have been provided to you by your ISP. If a secondary DNS server address is available, enter it also. Enter the assigned IP address, subnet mask, and the IP address of your ISP’s primary IPoA Static IP DNS server. This information should have been provided to you by your ISP. If a secondary DNS server address is available, enter it also. Wireless N300 ADSL2+ High Power Modem Router When Bridge mode is enabled, this device works as a modem. If you wish to initiate Bridge a dialup directly from your PC for Internet access or enjoy the entire Internet connection by yourself (instead of sharing it with others), you can select Bridge. Note If your country and/or your ISP are not covered on the home page, select Other country and ISP, and set VCI and VPI value manually. If you cannot locate this information, refer to Appendix 4 VPI/VCI List or ask your ISP to provide it. For more information, see To Set up the ATM interface and To Set up WAN Service for ATM Interface. 3.2.2 Ethernet Mode 1. Link Type: Select ETH. 2. Select your Connection Type according to your accessing method. 3. Secure your wireless network. (Strongly Recommended) 4. Click OK to apply your configurations. Note After saving the Ethernet mode settings, you will see the following prompt: And then you need to connect the Ethernet cable from the Internet side provided by your ISP to the LAN/WAN port, i.e. to finish Step 3 of Ethernet Mode in Chapter 2 Hardware Install-> 2.2 Install the Device. Wireless N300 ADSL2+ High Power Modem Router Depending on the type of connection, you are prompted to enter your ISP settings, as shown in the following table: Connection Type PPPoE ISP Information No entries are needed. Enter the assigned IP address, subnet mask, and the IP address of your ISP’s primary IPoE Static IP DNS server provided by your ISP. If a secondary DNS server address is available, enter it also. Dynamic IP Enter the user name and password provided by your ISP. 3.2.3 Test Internet Connectivity If Connection Status shows Connected shown as below, you access the Internet now. Try to launch a web browser and enter www.tendacn.com. If the webpage displays properly, you are connected to the Internet. Wireless N300 ADSL2+ High Power Modem Router Chapter 4 Advanced Settings If you prefer configuring your router for unique situations, consult this chapter to know advanced features. Click Advanced on the home page to enter the screen below. 10 Wireless N300 ADSL2+ High Power Modem Router 4.1 Device Info 4.1.1 Summary Here you can view system information and current status of your WAN connection as seen in the screenshot. 11 Wireless N300 ADSL2+ High Power Modem Router 4.1.2 WAN Here you can view the WAN Information including Interface, Description, Type, IGMP, NAT, Firewall, Status, IPv4 Address, etc. 4.1.3 Statistics Here you can view the packets received and transmitted on LAN and WAN ports. Statistics--LAN: Displays the packets received and transmitted on the LAN ports as seen in the screenshot below. Statistics--WAN: Displays the packets received and transmitted on the WAN port as seen in the screenshot below. 12 Wireless N300 ADSL2+ High Power Modem Router Statistics-xDSL: Display the packets received and transmitted on the DSL port. 13 Wireless N300 ADSL2+ High Power Modem Router 4.1.4 Route Here you can view the route table as seen in the screenshot: 4.1.5 ARP Here you can view the IP and MAC addresses of the PCs that attach to the device either via a wired or wireless connection as seen in the screenshot: 14 Wireless N300 ADSL2+ High Power Modem Router 4.1.6 DHCP Here you can view the DHCP leases, including IP and MAC addresses of the PCs, hostnames and remaining lease time as seen in the screenshot: 4.2 Advanced Setup 4.2.1 Layer2 Interface Click Advanced Setup > Layer2 Interface to enter the Layer2 Interface screen. This router provides two Layer2 Interfaces: - ATM Interface for ADSL broadband Internet service. (By default, system applies the ATM Interface [ADSL uplink].) - ETH Interface for connecting to the Internet via an Ethernet cable. If you directly connect to the ADSL line via a phone cable, first refer to To Set up the ATM interface and then skip to To Set up WAN Service for ATM Interface. If you connect to the Internet via a fiber/cable modem using an Ethernet cable, first refer to To Set up the ETH interface and then skip to To Set up WAN Service for ETH Interface. 15 Wireless N300 ADSL2+ High Power Modem Router To set up the ATM interface Step 1: Select ATM Interface and click Add to configure it. Step 2: Enter the VPI and VCI values. Select a DSL Link Type (Internet connection type): EoA, PPPoA or IPoA. Leave other options unchanged from factory defaults. Click Apply/Save. 16 Wireless N300 ADSL2+ High Power Modem Router Go to To Set up WAN Service for ATM Interface to configure the WAN service for Internet access. Tip If you are unsure about the VPI/VCI parameters, see Appendix 4 VPI/VCI List, or ask your ISP to provide it. To set up the ETH interface Step 1: Select ETH Interface and click Add. Step 2: Select eth0/eth0 in the box to function as a WAN port. Only one LAN port can be configured as the WAN port at a time. Click Apply/Save to take the settings into effect. 17 Wireless N300 ADSL2+ High Power Modem Router Go to To Set up WAN Service for ETH Interface to configure the WAN service for Internet access. 4.2.2 WAN Service This router provides two WAN services: - WAN Service for ATM Interface (ADSL uplink) - WAN Service for ETH Interface (Ethernet uplink) To Set up WAN Service for ATM Interface EoA (PPPoE, IPoE and Bridge) If you configured the ATM Interface (ADSL uplink) and select EoA as the DSL link type, follow below steps to configure the WAN service: PPPoE IPv4 Only Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. 18 Wireless N300 ADSL2+ High Power Modem Router Step 3: Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol: IPv4 Only. Click Next. 19 Wireless N300 ADSL2+ High Power Modem Router Step 4: Finish PPP Username and Password and other settings on the figure below. Click Next. PPP Username/Password: For logging in to your ISP. If you cannot locate this information, ask your ISP to provide it. PPPoE Service Name: Provided by your ISP. Only enter it if instructed by your ISP. Authentication Method: Used by ISP to authenticate the client that attempts to connect. If you are not sure, consult your ISP or select AUTO. MAC Clone: When you cannot access the Internet after finishing other settings here except this option, consider whether it’s the matter of the MAC address of your computer. Clicking Clone MAC button copies the MAC address of your computer to the router. MTU: Keep the default value unless you are sure it is necessary for your ISP connection. Dial on demand: Connect to ISP only when there is traffic transmission. This saves your broadband Internet service bill. PPP IP extension: If enabled, all the IP addresses in outgoing packets including management packets on the WAN port will be changed to the device's WAN IP address. Only change the default settings if necessary. Enable PPP Debug Mode: Only enable this feature if supported by your ISP. Bridge PPPoE Frames Between WAN and Local Ports: If enabled, PPPoE dialup frame from LAN side will directly egress the WAN port without modification. Multicast Proxy: If enabled, the router will use multicast proxy. Knowledge Expansion 1. MAC Clone: Many broadband ISPs restrict access by allowing traffic only from the MAC address of your broadband modem, but some ISPs additionally register the MAC address of your computer when your account is first opened. If so, 20 Wireless N300 ADSL2+ High Power Modem Router only by cloning the MAC address of your computer can you access the Internet through the router. 2. MTU: Short for Maximum Transmission Unit, the largest physical packet size, measured in bytes, which a network can transmit. Any messages larger than the MTU are divided into smaller packets before being sent. The default MTU is 1492 bytes. For some ISPs, you might need to change the MTU. This is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. Step 5: To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address in Available Routed WAN Interfaces box and move it into Selected Default Gateway Interfaces box. The default setting is recommended. Then click Next. Step 6: To configure the WAN DNS address, click the Select DNS Server Interface from available WAN interfaces option, or select the Use the following Static DNS IP address option and enter the static DNS server IP addresses provided by your ISP. At last, click Next. 21 Wireless N300 ADSL2+ High Power Modem Router Step 7: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the PPPoE connection is successful, you can access the Internet. 22 Wireless N300 ADSL2+ High Power Modem Router IPv4 & IPv6 (Dual Stack) Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. Step 3: Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol: IPv4&IPv6 (Dual Stack). Click Next. 23 Wireless N300 ADSL2+ High Power Modem Router Step 4: Configure PPP Username and Password and other settings on the figure below. Each field with its indication is mentioned above in IPv4 Only (PPPoE) section. Check Launch Dhcp6c for Prefix Delegation (IAPD). Click Next. 24 Wireless N300 ADSL2+ High Power Modem Router If your ISP is using static DHCPv6, check Launch Dhcp6c for Address Assignment (IANA) also, or configure a static IP address by checking Use Static IPv6 Address and enter the static IPv6 address. Step 5: To configure the Default Gateway interface when using IPv6, select the interface that you want to configure with the WAN gateway address in Selected WAN Interface box. Then click Next. Step 6: To configure the WAN DNS address, check the Obtain IPv6 DNS info from a WAN interface option, or select the Use the following Static IPv6 DNS address option to enter the static DNS server IPv6 addresses provided by your ISP. At last, click Next. Step 7: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. 25 Wireless N300 ADSL2+ High Power Modem Router When the PPPoE connection is successful, you can access the Internet. IPv6 Only Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. 26 Wireless N300 ADSL2+ High Power Modem Router Step 3: Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol you need: IPv6 Only. Click Next. Step 4: Configure PPP Username and Password and other settings on the figure below. Each field with its indication is mentioned above in IPv4 Only (PPPoE) section. If ISP provides you no static IPv6 address, you just keep the default settings for it’s by default the DHCP mode. Check Launch Dhcp6c for Prefix Delegation (IAPD). If your ISP is using stateful DHCPv6, check Launch Dhcp6c for Address Assignment (IANA) also. Click Next. 27 Wireless N300 ADSL2+ High Power Modem Router If ISP provides you with the static IPv6 address, configure a static IP address by checking Use Static IPv6 Address and enter the static IPv6 address. Step 5: To configure the Default Gateway interface when using IPv6, select the interface that you want to configure with the WAN gateway address in Selected WAN Interface box. Then click Next. 28 Wireless N300 ADSL2+ High Power Modem Router Step 6: To configure the WAN DNS address, check the Obtain IPv6 DNS info from a WAN interface option, or select the Use the following Static IPv6 DNS address option to enter the static DNS server IPv6 addresses provided by your ISP. At last, click Next. Step 7: Here you can view your configurations. Click Apply/Save to take this interface into effect. 29 Wireless N300 ADSL2+ High Power Modem Router When the PPPoE connection is successful, you can access the Internet. IPoE IPv4 Only If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask and the gateway IP address, you need to select the IP over Ethernet (IPoE). Step 1: Click Advanced Setup > WAN Service and then click the Add button. 30 Wireless N300 ADSL2+ High Power Modem Router Step 2: Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. Step 3: Select IP over Ethernet. Edit the Enter Service Description which is optional. Suggest you keep the default. Select a network protocol: IPv4 Only. Click Next. Step 4: Finish WAN IP Settings on the figure below. Click Next. 31 Wireless N300 ADSL2+ High Power Modem Router Obtain an IP address automatically: This allows the router to automatically acquire IP information from your ISP or your existing networking equipment. Use the following Static IP address: This allows you to specify the Static IP information provided by your ISP or that corresponds with your existing networking equipment. WAN IP Address: The Internet IP address provided by your ISP for accessing the Internet. WAN Subnet Mask: The subnet mask address provided by your ISP for accessing the Internet. WAN gateway IP Address: The gateway IP address provided by your ISP for accessing the Internet. Step 5: Finish Network Address Translation Settings. Suggest keep the default settings. Click Next. 32 Wireless N300 ADSL2+ High Power Modem Router Step 6: To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address in Available Routed WAN Interfaces box and move it into Selected Default Gateway Interfaces box. The default setting is recommended. Then click Next. Step 7: To finish DNS Server Configuration, click the Select DNS Server Interface from available WAN interfaces option, or select the Use the following Static DNS IP address option and enter the static DNS server IP addresses provided by your ISP. At last, click Next. Step 8: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. 33 Wireless N300 ADSL2+ High Power Modem Router When the IPoE connection is successful, you can access the Internet. IPv4 & IPv6 (Dual Stack) Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. 34 Wireless N300 ADSL2+ High Power Modem Router Step 3: Select IP over Ethernet. Edit the Enter Service Description which is optional. Suggest you keep the default. Select a network protocol: IPv4&IPv6 (Dual Stack). Click Next. Step 4: To finish WAN IP Settings, select Obtain an IPv6 address automatically, check Dhcpv6 Prefix Delegation (IAPD). If your ISP is using stateful DHCPv6, check Dhcpv6 Address Assignment (IANA) also. Or select Use the following Static IP address if your ISP provides you with an IPv6 address. Click Next. 35 Wireless N300 ADSL2+ High Power Modem Router If ISP provides you with the static IPv6 address, configure a static IP address by checking Use the following Static IPv6 address and enter the static IPv6 address. Step 5: Configure NAT settings. If you are unsure about the options, please keep the default settings and then click Next. 36 Wireless N300 ADSL2+ High Power Modem Router Step 6: Configure the WAN gateway address. Default gateway interface list can have multiple WAN interfaces served as system default gateways but only one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. If you are unsure about the options, please keep the default settings and then click Next. If you are using static IPv6 DNS address, select Use the following Static IPv6 DNS address and manually enter the DNS server address. If you have two DNS server addresses, enter the secondary also. And click Next. 37 Wireless N300 ADSL2+ High Power Modem Router Step 7: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the IPoE connection is successful, you can access the Internet. 38 Wireless N300 ADSL2+ High Power Modem Router IPv6 Only Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. Step 3: Select IP over Ethernet (IPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol you need: IPv6 Only. Click Next. 39 Wireless N300 ADSL2+ High Power Modem Router Step 4: Enter the WAN information provided by your ISP to configure the WAN IPv6 settings. To obtain an IP address automatically: Select Obtain an IPv6 address automatically. Check Dhcp6c Prefix Delegation (IAPD). If your ISP is using stateful DHCPv6, check Dhcp6c Address Assignment (IANA) also. Click Next to go forwards. 40 Wireless N300 ADSL2+ High Power Modem Router Step 5: Finish Network Address Translation Settings. Suggest keep the default settings. Click Next. Step 6: To configure the Default Gateway interface when using IPv6, select the interface that you want to configure with the WAN gateway address in Selected WAN Interface box. Then click Next. Step 7: To configure the WAN DNS address, check the Obtain IPv6 DNS info from a WAN interface option, or select the Use the following Static IPv6 DNS address option to enter the static DNS server IPv6 addresses provided by your ISP. At last, click Next. 41 Wireless N300 ADSL2+ High Power Modem Router Step 8: Here you can view your configurations. Click Apply/Save to have this interface to be effective. When the IPoE connection is successful, you can access the Internet. 42 Wireless N300 ADSL2+ High Power Modem Router Bridge If you wish to initiate a dialup directly from your PC for Internet access or enjoy the entire Internet connection (instead of sharing it with others), you can use the Bridging DSL link type and create a dialup program on your PC. Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. Step 3: Select Bridging. Edit the Enter Service Description which is optional. Suggest you keep the default. Click Next. 43 Wireless N300 ADSL2+ High Power Modem Router Step 4: Here you can view your configurations. Click Apply/Save to have this interface to be effective. After the bridging connection is successful, initiate a dialup directly from your PC for Internet access. 44 Wireless N300 ADSL2+ High Power Modem Router Note To configure multiple WAN connect ions, simply configure multiple ATM interfaces and then follow the instructions above. PPPoA If you have selected the PPPoA from the ATM Interface screen in Layer2 Interface, you will see the screen below when you click the WAN Service tab, select the configured interface and click Next. IPv4 Only Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. Step 3: Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv4 Only, IPv6 Only or IPv4 & IPv6 (Dual Stack). Click Next. 45 Wireless N300 ADSL2+ High Power Modem Router Step 4: Enter PPP username and its password provided by your ISP. Click Next. PPP Username: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide it. PPP Password: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide it. Authentication Method: This is used by ISP to authenticate the client that attempts to connect. If you are not sure, consult your ISP or select AUTO. Dial on demand: Connect to ISP only when there is traffic transmission. This saves your broadband Internet service bill. Enable PPP Debug Mode: Only enable this feature if supported by your ISP. Multicast Proxy: If enabled, the router will use multicast proxy. If you are not sure about the options on this screen, simply enter your ISP user name and password and leave the other options unchanged from defaults. Click Next to enter the following screen. 46 Wireless N300 ADSL2+ High Power Modem Router Step 5: To configure the WAN gateway address. After you configure it click Next. The default setting is recommended. Step 6: To configure the WAN DNS address. Choose a way to get DNS server according to what your ISP has provided. -Click the Select DNS Server Interface from available WAN interfaces option. -Select the Use the following Static DNS IP address option and enter static DNS server IP addresses for the system. And then click Next. Note 1. DNS Server Interfaces can have multiple WAN interfaces served as system DNS servers but only one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. 2. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. 47 Wireless N300 ADSL2+ High Power Modem Router 3. If you cannot locate the static DNS server IP information, ask your ISP to provide it. Step 7: Here you can view your configurations. Click Apply/Save to have this interface to be effective. Step 8: When the PPPoA connection is successful, you can access the Internet. IPv4 & IPv6 (Dual Stack) Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. 48 Wireless N300 ADSL2+ High Power Modem Router Step 3: Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv4 & IPv6 (Dual Stack). Click Next. Step 4: Enter PPP username and its password provided by your ISP. Click Next. 49 Wireless N300 ADSL2+ High Power Modem Router Step 5: To configure the WAN gateway address. After you configure it click Next. The default setting is recommended. Note Default gateway interface list can have multiple WAN interfaces served as system default gateways but only one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. 50 Wireless N300 ADSL2+ High Power Modem Router Step 6: To configure the WAN DNS address Select DNS Server Interface from available WAN interfaces OR enter static DNS server IP addresses for the system. And then click Next. Note 1. DNS Server Interfaces can have multiple WAN interfaces served as system DNS servers but only one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. 2. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. 3. If you cannot locate the static DNS server IP information, ask your ISP to provide it. Step 7: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. 51 Wireless N300 ADSL2+ High Power Modem Router Step 8: When the PPPoA connection is successful, you can access the Internet. IPv6 Only Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. 52 Wireless N300 ADSL2+ High Power Modem Router Step 3: Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv6 Only. Click Next. Step 4: Enter PPP username and its password provided by your ISP. Click Next. 53 Wireless N300 ADSL2+ High Power Modem Router Step 5: Select a preferred wan interface as the system default IPv6 gateway. Click Next. Step 6: To configure the WAN DNS address, select the configured WAN interface for IPv6 DNS server information or enter the static IPv6 DNS server addresses. And then click Next. 54 Wireless N300 ADSL2+ High Power Modem Router Note Selecting a WAN interface for IPv6 DNS server will enable DHCPv6 Client on that interface. Step 7: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. Step 8: When the PPPoA connection is successful, you can access the Internet. 55 Wireless N300 ADSL2+ High Power Modem Router IPoA If you have selected the IPoA from the ATM Interface screen in Layer2 Interface, you will see the screen above when you click the WAN Service tab, select the configured interface and click Next. Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next. Step 3: Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Click Next. 56 Wireless N300 ADSL2+ High Power Modem Router Step 4: Enter the WAN IP address and subnet mask which should have been provided to you by your ISP. If you cannot locate this information, ask your ISP to provide it. And then click Next. WAN IP Address: The Internet IP address provided by your ISP for accessing the Internet. WAN Subnet Mask: The subnet mask address provided by your ISP for accessing the Internet. Step 5: Keep the defaults if you are unsure about the options on the screen below and click Next. 57 Wireless N300 ADSL2+ High Power Modem Router Step 6: To configure the WAN gateway address. After you configure it click Next. The default setting is recommended. Note Default gateway interface list can have multiple WAN interfaces served as system default gateways but only one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. Step 7: Configure the WAN DNS Server configuration according to your ISP. -Click the Select DNS Server Interface from available WAN interfaces option; -Or select the Use the following Static DNS IP address option and enter static DNS server IP addresses for the system. And then click Next. 58 Wireless N300 ADSL2+ High Power Modem Router Step 8: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. Step 9: IPoA WAN service setup parameter is shown as below. To Set up WAN Service for ETH Interface Three Internet connections: PPP over Ethernet (PPPoE), IP over Ethernet (IPoE) and Bridging are available in the Ethernet uplink mode. If you selected and configured the ETH Interface (Ethernet uplink), follow steps below to configure the WAN service: Tip eth0, eth1, eth2 and eth3 respectively represent the LAN port1, LAN port2, LAN port3 and LAN port4 of the device. 59 Wireless N300 ADSL2+ High Power Modem Router PPP over Ethernet (PPPoE) IPv4 Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next. Step 3: Select PPP over Ethernet. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv4 Only. And click Next. 60 Wireless N300 ADSL2+ High Power Modem Router Step 4: Enter the PPP username and password provided by your ISP. If you are not sure about other options, just leave them unchanged from defaults. And click Next. PPP Username: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide it. PPP Password: This is for logging in to your ISP. If you cannot locate this information, ask your ISP to provide it. PPPoE Service Name: This information is provided by your ISP. Only enter it if instructed by your ISP. 61 Wireless N300 ADSL2+ High Power Modem Router Authentication Method: This is used by ISP to authenticate the client that attempts to connect. If you are not sure, consult your ISP or select Auto. MAC Clone: Clicking Clone MAC button copies the MAC address of your PC to the router. Many broadband ISPs restrict access by allowing traffic only from the MAC address of your broadband modem, but some ISPs additionally register the MAC address of the network interface card in your computer when your account is first opened. They then accept traffic only from the MAC address of that computer. If so, configure your router to “clone” the MAC address from the authorized computer. MTU: Short for Maximum Transmission Unit, the largest physical packet size, measured in bytes, which a network can transmit. Any messages larger than the MTU are divided into smaller packets before being sent. The default MTU is 1492 bytes. For some ISPs, you might need to change the MTU. This is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. Dial on demand: Connect to ISP only when there is traffic transmission. This saves your broadband Internet service bill. PPP IP extension: If enabled, all the IP addresses in outgoing packets including management packets on the WAN port will be changed to the device's WAN IP address. Only change the default settings if necessary. Enable PPP Debug Mode: Only enable this feature if supported by your ISP. Bridge PPPoE Frames Between WAN and Local Ports: If enabled, PPPoE dialup frame from LAN side will directly egress the WAN port without modification. Multicast Proxy: If enabled, the router will use multicast proxy. Step 5: Configure the WAN gateway address. After you configure it click Next. The default setting is recommended. 62 Wireless N300 ADSL2+ High Power Modem Router Step 6: Configure the WAN DNS address according to your ISP. -Click the Select DNS Server Interface from available WAN interfaces option; -Or select the Use the following Static DNS IP address option and enter static DNS server IP addresses for the system. And then click Next. Step 7: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the PPPoE connection is successful, you can access the Internet. 63 Wireless N300 ADSL2+ High Power Modem Router IPv4 & IPv6 (Dual Stack) Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next. Step 3: Select PPP over Ethernet. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv4&IPv6 (Dual Stack). And click Next. 64 Wireless N300 ADSL2+ High Power Modem Router Step 4: Enter PPP username and PPP password provided by your ISP. Check Launch Dhcp6c for Prefix Delegation (IAPD). If your ISP is using stateful DHCPv6, check Launch Dhcp6c for Address Assignment (IANA) also. Or configure a static IP address. 65 Wireless N300 ADSL2+ High Power Modem Router Step 5: Select a avaliable WAN interface as the system default gateway. Then click Next. Step 6: Configure DNS server (Select an available DNS server interface or use a specified DNS server); configure IPv6 DNS server (Obtain IPv6 DNS info from a WAN interface or use a specified DNS server), and then click Next. Step 7: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. 66 Wireless N300 ADSL2+ High Power Modem Router When the PPPoE connection is successful, you can access the Internet. IPv6 Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next. 67 Wireless N300 ADSL2+ High Power Modem Router Step 3: Select PPP over Ethernet. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv6 Only. And click Next. Step 4: Enter PPP username and PPP password provided by your ISP. Check Launch Dhcp6c for Prefix Delegation (IAPD). If your ISP is using stateful DHCPv6, check Launch Dhcp6c for Address Assignment (IANA) also. Or configure a static IP address. 68 Wireless N300 ADSL2+ High Power Modem Router Step 5: Select a preferred WAN interface from the WAN interface lise as the system default IPv6 gateway. Click Next. Step 6: Select the configured WAN interface for IPv6 DNS server information or use a static IPv6 DNS server address. Note that selecting a WAN interface for IPv6 DNS server will enable DHCPv6 Client on that interface. And then click Next. 69 Wireless N300 ADSL2+ High Power Modem Router Step 7: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the PPPoE connection is successful, you can access the Internet. 70 Wireless N300 ADSL2+ High Power Modem Router IP over Ethernet (IPoE) If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask and the gateway IP address, you need to select the IP over Ethernet (IPoE). IPv4 Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next. Step 3: Select IP over Ethernet as WAN service type. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv4 Only. And then click Next. 71 Wireless N300 ADSL2+ High Power Modem Router Step 4: Enter the IP address/subnet mask/gateway IP address provided by your ISP or select Obtain an IP address automatically and then click the Next button. Obtain an IP address automatically: This allows the router to automatically acquire IP information from your ISP or your existing networking equipment. Use the following Static IP address: This allows you to specify the Static IP information provided by your ISP or that 72 Wireless N300 ADSL2+ High Power Modem Router corresponds with your existing networking equipment. WAN IP Address: The Internet IP address provided by your ISP for accessing the Internet. WAN Subnet Mask: The subnet mask address provided by your ISP for accessing the Internet. WAN gateway IP Address: The gateway IP address provided by your ISP for accessing the Internet. Step 5: Here you can configure the NAT. If you are not an advanced user we recommend you to keep the default settings and then click Next. Step 6: Here you can configure the WAN gateway address. After you configure it click Next. The default setting is recommended. Step 7: Here you can configure the WAN DNS address. -Click the Select DNS Server Interface from available WAN interfaces option; -Or select the Use the following Static DNS IP address option and enter static DNS server IP addresses for the system. 73 Wireless N300 ADSL2+ High Power Modem Router And then click Next. Step 8: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the IPoE connection is successful, you can access the Internet. 74 Wireless N300 ADSL2+ High Power Modem Router IPv4 & IPv6 (Dual Stack) Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next. Step 3: Select IP over Ethernet as WAN service type. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv4&IPv6 (Dual Stack). And then click Next. 75 Wireless N300 ADSL2+ High Power Modem Router Step 4: Enter information provided by your ISP to configure the WAN IP settings. 76 Wireless N300 ADSL2+ High Power Modem Router Step 5: Here you can configure the NAT. If you are not an advanced user we recommend you to keep the default settings and then click Next. Step 6: Configure a WAN interface as the default gateway. Step 7: Configure DNS server (Select an available DNS server interface or use a specified DNS server); configure IPv6 DNS server (Obtain IPv6 DNS info from a WAN interface or use a specified DNS server), and then click Next. 77 Wireless N300 ADSL2+ High Power Modem Router Step 8: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. When the IPoE connection is successful, you can access the Internet. 78 Wireless N300 ADSL2+ High Power Modem Router IPv6 Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next. Step 3: Select IP over Ethernet as WAN service type. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. Select a network protocol: IPv6 Only. And then click Next. 79 Wireless N300 ADSL2+ High Power Modem Router Step 4: Enter the WAN information provided by your ISP to configure the WAN IPv6 settings. To obtain an IP address automatically: Select Obtain an IPv6 address automatically and Check Dhcp6c Prefix Delegation (IAPD). If your ISP is using stateful DHCPv6, check Dhcp6c Address Assignment (IANA) also. Click Next to go forwards. 80 Wireless N300 ADSL2+ High Power Modem Router Step 5: Here you can configure the NAT. If you are not an advanced user we recommend you to keep the default settings and then click Next. Step 6: To configure the Default Gateway interface when using IPv6, select the interface that you want to configure with the WAN gateway address in Selected WAN Interface box. Then click Next. 81 Wireless N300 ADSL2+ High Power Modem Router Step 7: To configure the WAN DNS address, check the Obtain IPv6 DNS info from a WAN interface option, or select the Use the following Static IPv6 DNS address option to enter the static DNS server IPv6 addresses provided by your ISP. At last, click Next. Step 8: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. 82 Wireless N300 ADSL2+ High Power Modem Router When the IPoE connection is successful, you can access the Internet. Bridging If you wish to initiate a dialup directly from your PC for Internet access or enjoy the entire Internet connection (instead of sharing it with others), you can select the Bridging and create a dialup program on your PC. Step 1: Click Advanced Setup > WAN Service and then click the Add button. Step 2: Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next. 83 Wireless N300 ADSL2+ High Power Modem Router Step 3: Select Bridging. Edit the Enter Service Description. This field is optional. We recommend that you keep the default. And click Next. Step 4: Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set. 84 Wireless N300 ADSL2+ High Power Modem Router After the bridging connection is successful, initiate a dialup directly from your PC for Internet access. Note The device functions as a switch in Bridge mode -Ethernet uplink. 4.2.3 LAN Here you can configure the LAN IP address and subnet mask. This IP address is to be used to access the device’s settings through a web browser. Be sure to make a note of any changes you apply to this page. IPv4 Click Advanced > LAN to enter the IPv4 address setting interface. 85 Wireless N300 ADSL2+ High Power Modem Router 1) IP Address/Subnet Mask: The device's LAN IP address and subnet mask that both you can change to fit your network. The default IP address is 192.168.1.1. If you change the LAN IP address, you should use the new address to access the management interface next time. 2) Enable IGMP Snooping: Check to enable the IGMP Snooping feature. IGMP Snooping is to restrain broadcast on Layer 2. Enabling IGMP snooping is good for managing and controlling IPv4 broadcasts. Suggest selecting Blocking Mode. Standard Mode: If no members join in one broadcast group, packets of this group will be broadcasted; if there’re members joining in the group, packets will be only forwarded to the LAN port where the group members exist. Blocking Mode: If no members join in one broadcast group, packets of this group will be dropped; if there’s members joining in the broadcast group, packets will be only forwarded to the LAN port where the group members exist. 3) Enable DHCP Server: Check to enable the DHCP Server so that every upstream device connected to your router can obtain the IP address to access the Internet. If you would like to configure every upstream device with static IP 86 Wireless N300 ADSL2+ High Power Modem Router address to access the Internet, you can check Disable DHCP Server. 4) Start/End IP Address: Specify the start/end of the range for the IP address pool in the same subnet as the router. Only enabling DHCP server need you to finish this part configurations. 5) Leased Time: A time length that the IP address is assigned to each device before it is refreshed. 6) Static IP Lease List: A list of devices with reserved static IP addresses. If you prefer to configure each upstream device of your router with a static IP address for better management, you can add static IP addresses to the list. 7) Add Entries: Click this button to add a static IP lease entry. A maximum 32 entries can be configured. Remove Entries: Click this button to remove a static IP lease entry. Configure the second IP Address and Subnet Mask for LAN interface: If you want to configure two IP addresses for the LAN interface, you can check this option and enter the second IP Address and Subnet Mask manually. The second IP address and subnet mask have the same function as the first ones. 8) Apply/Save: After you configure all the needed settings, click this button to apply and save them. Tip: DHCP (Dynamic Host Configuration Protocol) assigns an IP address to each device on the LAN/private network. When you enable the DHCP Server, the DHCP Server will automatically allocate an unused IP address from the IP address pool specified in this screen to the requesting device as long as the device is set to "Obtain an IP Address Automatically". By default, DHCP server is enabled. IPv6 Autoconfig IPv6 address can only be Aggregatable Global Unicast Addresses and Unique Local Address. Link-Local Unicast Addresses and Multicast Addresses are not permitted. Click Advanced > LAN > IPv6 Autoconfig to enter the IPv6 address setting page. 87 Wireless N300 ADSL2+ High Power Modem Router Interface Address: Enter the interface address with prefix length. E.g., the interface IPv6 address is “2000::1/64”, then you need to input http://[2000::1] in the browse address bar to access the device management interface. Enable DHCPv6 Server: Check to enable the DHCPv6 Server. Select Stateless or Stateful as you need. Stateless: If selected, IPv6 clients will generate IPv6 addresses automatically based on the Prefix Delegation's IPv6 prefix and their own MAC addresses. Stateful: Stateful DHCPv6 is supported based on the assumption of prefix length less than 64. Select this option and configure the start/end interface ID and leased time. The router will automatically assign IPv6 addresses to IPv6 clients. Enable RADVD: Check it to enable the RADVD for informing computers in the LAN of your router’s existence. When computers get the message, they will take the router’s IP address as the secondary route for easy use. In addition, checking RADVD can also broadcast the prefix address generated from the computer in the LAN. Enable IGMP Snooping: Check to enable the IGMP Snooping feature. IGMP Snooping is to restrain broadcast on Layer 2. Enabling IGMP snooping is good for managing and controlling IPv6 broadcasts. Suggest to select Blocking Mode. Standard Mode: If no members join in one broadcast group, packets of this group will be broadcasted; if there’re members joining in the group, packets will be only forwarded to the LAN port where the group members exist. Blocking Mode: If no members join in one broadcast group, packets of this group will be dropped; if there’s members joining in the broadcast group, packets will be only forwarded to the LAN port where the group members exist. 88 Wireless N300 ADSL2+ High Power Modem Router Click Save/Apply. Other fields’ introduction that may help: Enable ULA Prefix Advertisement: If enabled, the router will advertise ULA prefix periodically. Leased Time (hour): A time length that the IP address is assigned to each device before it is refreshed. Start interface ID/End interface ID: Specify the start/end interface ID Interface ID does NOT support ZERO COMPRESSION "::". Please enter the complete information. For example: Please enter "0:0:0:2" instead of "::2". Randomly Generate: If selected, address prefix can be automatically generated. Statically Configure: If you select this option, you need to manually configure the address prefix and life time. Prefix: Specify the prefix. Preferred Life Time (hour): Specify the preferred life time in hour. Valid Life Time (hour): Specify the valid life time in hour. Enable MLD Snooping: MLD is used by IPv6 routers for discovering multicast listeners on a directly attached link. If disabled on layer2 devices, IPv6 multicast data packets will be broadcast on the entire layer2; if enabled, these packets will be multicast to only specified recipient instead of being broadcast on the entire layer2. 4.2.4 NAT This section explains the following: • Virtual Server • Port Triggering • DMZ Host Virtual Server The Virtual Server is useful for web servers, ftp servers, e-mail servers, gaming and other specialized Internet applications. Scenario: If you have a server in the LAN, such as a website, FTP server or game server, you want e-friends to visit the server, but the firewall and NAT function of your router stop visitors from accessing computers in the LAN. Solution: Set virtual server rules to allow visitors to access the server via WAN IP address of your router. Click Advanced Setup > NAT > Virtual Servers to enter the virtual server setup page. Click Add to add rules. 89 Wireless N300 ADSL2+ High Power Modem Router User Interface: Select the WAN interface you will use to visit the server in your LAN. Configure the Service Name > Select a Service to select an existing service (Select One here is only an express to tell you select one service.) from the drop-down list. And then the corresponding external/internal start/end port will prompt automatically. Or configure Service Name > Custom Service to customize a service manually. Server IP Address: Enter the IP address of your local computer that will provide this service. Click Apply/Save to save configurations. Other fields’ introduction that may help: External Port Start/External Port End: Server ports provided for Internet users to accessing the LAN. Protocol: Select the protocol from the Protocol drop-down list. If you are unsure, select TCP/UDP. Internal Port Start/Internal Port End: The ports used by the server in the LAN. After all the configurations, visitors on the Internet can access your server by simply using “Protocol Name://WAN IP address: External Port”. Note If UPnP feature on the router and some applications of the connected PC is enabled, you will be prompted on the Virtual 90 Wireless N300 ADSL2+ High Power Modem Router Server page that the UPnP interface is being used. Application Scenario: You have set up one web server on the LAN. Web server——IP: 192.168.1.50, TCP port: 8090. Now you hope friends on the Internet can access your web by Port 10480 through WAN port. WAN port——ipoe_eth0.1, IP: 1.2.3.4 Configuration Steps: Click Advanced Setup > NAT > Virtual Server to enter it and then click the Add button. Select the WAN interface ipoe_eth0/eth0.1 here. Input the word web in the Custom Service field. Then manually enter the port number 10480 in the External Port Start and External Port End fields, and enter the port number 8090 in the Internal Port Start and Internal Port End fields. Actually port in the Internal Port End filed follows the port number in the Internal Port Start field automatically. Select a protocol from the Protocol drop-down list. If you are unsure, select TCP/UDP. In the Server IP Address field, enter the IP address of the web server: 192.168.1.50. Click Apply/Save to save the configuration. 91 Wireless N300 ADSL2+ High Power Modem Router Result: Your friend on the Internet will be able to access your web server simply by entering “http://1.2.3.4:10480” in browser. Actually if you set the DNS in 4.2.9 DNS, your friend can also enter http://domain name:10480 to access your web server. Port Triggering Ports of some applications such as games, video conferencing and instant messenger, etc., are specified and meanwhile, your router’s firewall will stop messages to/from such ports, so for those applications, you cannot use them properly. However, Port Triggering is provided to help your play such games, or use this kind of instant messenger normally. Some safety system applications (like, safe guard and firewall) in the computer on the LAN may interfere with the Port triggering function. When using Port triggering, you can disable such applications. Click Advanced Setup > NAT > Port Triggering and then click the Add button to add rules. 92 Wireless N300 ADSL2+ High Power Modem Router Here in the Port Triggering interface, you can configure the port settings by selecting an existing application or creating your own (Custom application). User Interface: Select the WAN interface you will use to visit the server in your LAN. Configure the Application Name > Select an application to select an existing application (Select One here is only an express to tell you select one application.) from the drop-down list. And then the corresponding trigger start/end port will prompt automatically. Or configure Application Name > Custom application to customize an application manually. Trigger Protocol: Select the protocol from the drop-down list. If you are unsure, select TCP/UDP. Click Save/Apply to save configurations. Other fields’ introduction that may help: Trigger Port Start/End: The port range for an application to initiate connections. Open Port Start/End: After the application connection is established, the built-in firewall of the router will open ports between the start port number and end port number automatically. Application Scenario: You always use ICQ to communicate with computers on the Internet. You hope your LAN is secure and your instant communication with other computers can be smoother. The WAN port now is ipoe_eth0.1. Solution: 93 Wireless N300 ADSL2+ High Power Modem Router DMZ Host The default DMZ (De-Militarized Zone) host feature is helpful when you are using some online games and videoconferencing applications that are not compatible with NAT (Network Address Translation). Note that enabling DMZ host means the built-in firewall of your router takes no effect, and your computer that’s set as the DMZ host will totally expose itself to the Internet. In this case, hacker may easily attack the DMZ host. Strongly recommend you to disable DMZ host and clear all the DMZ host settings as soon as possible when you do not use it. Click Advanced Setup > NAT > DMZ Host, input the IP address of the computer that you want to configure as the DMZ host into the DMZ Host IP Address field. At last, click Save/Apply. 94 Wireless N300 ADSL2+ High Power Modem Router 4.2.5 Security This section explains the following information: • IP Filtering • MAC Filtering IP Filtering Outgoing IP Filtering Setup By default, all outgoing IP traffic from LAN is allowed, but some IP traffic can be BLOCKED by setting up filters. Choose Add or Remove to configure outgoing IP filters. Choose Add to enter the following screen: This screen allows you to create a filter rule to identify outgoing IP traffic by specifying a new filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. Click 'Apply/Save' to save and activate the filter. Filter Name: Enter a descriptive filtering name. IP Version: Select the IP version that the filter rule supports. Here is IPv4. 95 Wireless N300 ADSL2+ High Power Modem Router Protocol: TCP/UDP, TCP, UDP and ICMP are available for your option. Source IP address [/prefix length]: Enter the [LAN IP address/prefix length] to be filtered. Source Port (port or port: port): Specify a port number or a range of ports used by LAN PCs to access the Internet. If you are unsure, leave it blank. Destination IP address [/prefix length]: Specify the external network IP address to be accessed by specified LAN PCs. Destination Port (port or port:port): Specify a port number or a range of ports used by LAN PCs to access external network. Incoming IP Filtering Setup When the firewall is enabled on a WAN or LAN interface, all incoming IP traffic is BLOCKED. However, some IP traffic can be ACCEPTED by setting up filters. Choose Add or Remove to configure incoming IP filters. Click Add to enter the following screen: This screen allows you to create a filter rule to identify incoming IP traffic by specifying a new filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. Click Apply/Save to save and activate the filter. 96 Wireless N300 ADSL2+ High Power Modem Router IP Version: Select the IP version that the filter rule supports. Here is IPv4. Protocol: TCP/UDP, TCP, UDP and ICMP are available for your option. Source IP address [/prefix length]: Enter the Internal IP address [/prefix length] to be filtered. Source Port (port or port:port): Specify a port number or a range of ports used by PCs from external network to access your internal network. Destination IP address [/prefix length]: Specify the internal network IP address [/prefix length] to be accessed by the specified PCs from external network. Destination Port (port or port:port): Specify a port number or a range of ports used by PCs from external network to access your internal network. MAC Filtering Note: This feature can only be configured in a bridge WAN service. MAC Filtering is only effective on ATM PVCs configured in Bridge mode. FORWARDED means that all MAC layer frames will be FORWARDED except those matching with any of the specified rules in the following table. BLOCKED means that all MAC layer frames will be BLOCKED except those matching with any of the specified rules in the following table. Choose Add or Remove to configure MAC filtering rules. _________________________________________________________________________________________________ Warning! Changing from one policy to another of an interface will cause all defined rules for that interface to be REMOVED AUTOMATICALLY! You will need to create new rules for the new policy. 97 Wireless N300 ADSL2+ High Power Modem Router Click Add to enter the following screen: Here you can create a filter to identify the MAC layer frames by specifying at least one condition below. If multiple conditions are specified, all of them take effect. Click Save/Apply to save and activate the filter. Protocol Type: Select a protocol type from the drop-down list. Destination MAC Address: Enter the destination MAC address to which the MAC filtering rule apply. Source MAC Address: Enter the source MAC address to which the MAC filtering rule apply. Frame Direction: Select a frame direction from the drop-down list. WAN Interfaces: Select a WAN interface from the drop-down list. 4.2.6 Parental Control This section explains the following information: • Time Restriction • URL Filter Time Restriction Here you can add time of day restriction that an attached LAN device can access the Internet. Click Parental Control > Time Restriction > Add to enter the following screen. 98 Wireless N300 ADSL2+ High Power Modem Router User Name: Enter a user name. Browser's MAC Address: Automatically adds the MAC address of the attached LAN device where the browser is running. Other MAC Address: Specify the MAC address of the computer that you want to apply Internet access restriction. Days of the week: Select the days of the week during which you wish to restrict Internet access. Start Blocking Time/End Blocking Time: Specify time of day restriction to an attached LAN device. Within this specified time length of the day, this LAN device will be blocked from the Internet. Apply/Save: Click it to save your settings. URL Filter Here you can add URL access restriction to all PCs in LAN. Select the URL List Type (Exclude or Include) first and then click Add to enter the screen below for configuring the list entries. Maximum 100 entries can be configured. 99 Wireless N300 ADSL2+ High Power Modem Router URL Address: Enter the URL you want to control the access. It can be a complete url address www.google.com, or a part of the domain, like “google”. Note If you have accessed the URL before you include it in a URL filter rule, you must reboot the router and erase it from your PC to activate this URL filter rule. To erase the domain name from your PC, click Win+R to enable Run process; enter cmd and then type ipconfig /flushdns. 4.2.7 Bandwidth Control This page allows you to control bandwidth of the specified IP segment. Bandwidth Control: Check/uncheck to enable/disable the bandwidth control feature. 100 Wireless N300 ADSL2+ High Power Modem Router Description: Enter the description of the controlled host. IP Address Range: Enter the IP address of the host you want to control. It can be hosts or a single host. If you want to limit a single IP address’s bandwidth, just keep the start IP same with the end IP, like 192.168.1.2-2 Max Upstream Speed (Kbp/s): Set the max upstream speed. Max Downstream Speed (Kbp/s): Set the max downstream speed. Status: You can view the current status of the controlled hosts, or you can select Enable/Disable from the drop-down list to enable or disable the current control rule. Action: Here displays the actions you can do about the corresponding rule. There are tow actions: Edit and Delete. Edit: Click the Edit button corresponding to the ID to eidt its control rule. And click OK to apply the modification. Delete: Click the Delete button corresponding to the ID to delete its control rule. Add: Aftre finishing the bandwidth control settings, click Add to generate the control rule. Apply/Save: Click this button to activate your configurations. Note Up to 16 entries can be allowed. 4.2.8 Routing This section explains the following: • Default Gateway • Static Route 101 Wireless N300 ADSL2+ High Power Modem Router Default Gateway Default gateway interface list can have multiple secondary WAN interfaces served as system default gateways but only one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. Selected Default Gateway Interfaces: Displays the selected default gateway interfaces. Select a WAN interface and click the button to move it to the Available Routed WAN Interfaces box. Available Routed WAN Interfaces: Displays the available routed WAN interfaces. Select a WAN interface and click the button to add it to the Selected Default Gateway Interfaces box. Apply/Save: Click it to save and activate your settings. Static Route Static routes provide additional routing information to your router. Typically, you do not need to add static routes. However, when there are several routers in the network, you may want to set up static routing. Static routing determines the path of the data in your network. You can use this feature to allow users on different IP domains to access the Internet via this device. It is not recommended to use this setting unless you are familiar with static routing. In most cases, dynamic routing is recommended, because this feature allows the router to detect the physical changes of the network layout automatically. If you want to use static routing, make sure the router’s DHCP function is disabled. 102 Wireless N300 ADSL2+ High Power Modem Router Click Add to enter the following screen: IP Version: Select IPv4 or IPv6. Destination IP address/prefix length: Enter the destination IP address and prefix length of the final destination. Interface: Select an interface from the drop-down list. Gateway IP Address: Enter the gateway IP address, which must be a router on the same LAN segment as the router. Metric: Enter a number in the Metric field. This stands for the number of routers between your network and the destination. Apply/Save: Click it to apply and save your settings. Note 1. Destination IP address cannot be in the same IP segment as WAN or LAN segment of the router. 2. Only configure additional static routes for unusual cases such as multiple routers or multiple IP subnets located on your network. Wrong static routes may lead to network failure. 103 Wireless N300 ADSL2+ High Power Modem Router 4.2.9 DNS DNS Server (Static DNS) The DNS server translates domain names to numeric IP addresses. It is used to look up site addresses based on their names. Select DNS Server Interface from available WAN interfaces or enter static DNS server IP addresses for the system. Here you can configure the WAN DNS address: For IPv4: -Click the Select DNS Server Interface from available WAN interfaces option; -Or select the Use the following Static DNS IP address option and enter static DNS server IP addresses for the system. And then click Apply/Save. For IPv6: -Select Obtain IPv6 DNS info from a WAN interface and Select a configured WAN interface for the IPv6 DNS server information. -Select Use the following Static IPv6 DNS address and enter the static IPv6 DNS server addresses. And then click Apply/Save. 104 Wireless N300 ADSL2+ High Power Modem Router Note 1. DNS Server Interfaces can have multiple WAN interfaces served as system DNS servers but only one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. 2. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. 3. If you cannot locate the static DNS server IP information, ask your ISP to provide it. 4. The default settings are recommended if you are unsure about the DNS server addresses. If a wrong DNS server address is configured, webpages may not be open. Dynamic DNS (DDNS) If your Internet service provider (ISP) gave you a static (fixed) public IP address, you can register a domain name and have that name associated with your IP address by public Domain Name Servers (DNS). However, if your ISP gave you a dynamic (changing) public IP address, you cannot predict what your IP address will be, and the address can change frequently. In this case, you can use a commercial Dynamic DNS service. It lets you register your domain to their IP address and forwards traffic directed at your domain to your frequently changing IP address. If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), the Dynamic DNS service does not work because private addresses are not routed on the Internet. Click Advanced Setup > DNS > Dynamic DNS to enter the Dynamic DNS screen. 105 Wireless N300 ADSL2+ High Power Modem Router Click the Add button to configure the DDNS settings. D-DNS Provider: Select your DDNS service provider from the drop-down menu. It supports three kinds of D-DNS service: DynDNS.org, TZO and NO-IP. Hostname: Enter the DDNS domain name registered with your DDNS service provider. Interface: Specify a WAN connection interface. Username: Enter the DDNS user name registered with your DDNS service provider. Password: Enter the DDNS password registered with your DDNS service provider. Example: Dyndns.org Username: qiangweianbian Password: 414637 106 Wireless N300 ADSL2+ High Power Modem Router Hostname: xhh3793.dyndns.org Add Dynamic DNS 1) Select DynDNS.org from the D-DNS provider drop-down list. 2) Enter your Dyndns hostname. Here is “xhh3793.dyndns.org” as an example. 3) Specify a WAN connection interface. DynDNS Settings 1) Enter your DynDNS username. Here is “qiangweianbian” as an example. 2) Enter the password of your DynDNS.org account. Here is “414637” as an example. 3) Click Apply/Save to save your configurations. 107 Wireless N300 ADSL2+ High Power Modem Router 108 Wireless N300 ADSL2+ High Power Modem Router 4.2.10 DSL This screen provides multiple ASDL modulation modes to meet diversified environments. You can also select phone line pair and Capability. DSL parameter configurations must be supported by ISP to take effect. Actual parameters (see Statistics-xDSL) resulted from the negotiation between your router and ISP. Wrong configurations may fail your Internet access. The best DSL configurations are the factory defaults. Only change them if you are instructed by your ISP or our technical staff when your router fails to negotiate with ISP in DSL (ATM) mode. Usually, this failure can be identified and confirmed if the ADSL LED on the device keeps displaying a slow or quick blinking light. Check the checkbox next to a modulation to enable it and then click Apply/Save. Advanced Settings: Click it to enter the Advanced Settings screen as below. 109 Wireless N300 ADSL2+ High Power Modem Router Here you can select the test mode and tone. Tip If you are unsure about the ADSL parameters, please apply the factory default settings. Wrong configurations may fail your Internet access. 4.2.11 UPnP UPnP (Universal Plug and Play) allows Windows based systems to configure the device for various Internet applications automatically. UPnP devices can automatically discover the services from other registered UPnP devices on the network. If you use applications such as multiplayer gaming, peer-to-peer connections, or real-time communications, like instant messaging or remote assistance (a feature in Windows XP), you should enable UPnP. 110 Wireless N300 ADSL2+ High Power Modem Router Enable UPnP: Check/uncheck to enable/disable the UPnP feature. Note UPnP is activated only when there is a live WAN service with NAT enabled. 4.2.12 Print Server Enabling the Print Server makes all PCs in the LAN have an access to the USB printer which has been connected to this router. Click Advanced Setup > Printer Server to enter screen below: 111 Wireless N300 ADSL2+ High Power Modem Router USB printing config: Step 1: Connect the USB printer to the USB port of the device. Step 2: Enable USB printing service of the device (the router). Enter the name of the USB printer in Printer name box. Enter the manufacturer and model of the USB printer in the Make and model box. Click Apply/Save. Step 3: Add the printer from your local PC (In Windows XP OS) Click Start > Control Panel > Printers and Faxes > Add a printer; 112 Wireless N300 ADSL2+ High Power Modem Router Click Next; Select A network printer, or a printer attached to another computer and click Next; 113 Wireless N300 ADSL2+ High Power Modem Router Select Connect to a printer on the Internet or on a home or office network, type in “http://192.168.1.1:631/printers/hp3845” in the URL field and click Next; Note: Here “192.168.1.1” refers to this router’s LAN IP address and “hp3845” refers to the USB printer name you’ve filled in on the Print Server Settings page (See Step 2). Insert the printer driver CD into your computer and click Have Disk…; 114 Wireless N300 ADSL2+ High Power Modem Router Click Browse, select driver file directory on CD-ROM and click OK; Select the manufacturer and the model of your printer. And click OK. 115 Wireless N300 ADSL2+ High Power Modem Router Choose “Yes” or “No” for default printer setting and click Next. Click Finish. Check the status of printer from Windows “Control Panel”, printer window. Status should be shown “ready”. 116
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Extract Author : tenda22 Create Date : 2015:02:16 11:52:43+08:00 Modify Date : 2015:03:05 13:40:05-08:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2015:03:05 13:40:05-08:00 Creator Tool : Microsoft® Word 2013 Format : application/pdf Title : 版权申明 Creator : tenda22 Document ID : uuid:86e91230-96a3-491c-ac29-3d469eb42227 Instance ID : uuid:95546aaa-01a3-4d59-8fb4-187165668258 Producer : Microsoft® Word 2013 Page Count : 120EXIF Metadata provided by EXIF.tools