TOMTOP Technology LS1 Koogeek Smart Light Strip User Manual

Shenzhen TOMTOP Technology Co., Ltd Koogeek Smart Light Strip

User Manual

第1页共3页LS1 Smart Light Strip   QUICK START GUIDE 1. Connect the USB connector to a power source (e.g., power bank, computer or USB charger). The Smart Light Strip will light up in warm white to indicate it is ready for network setup. 2. Make sure your iPhone or iPad (iOS 8.1 or later) is connected to a 2.4GHz Wi-Fi network. Using the router utility software, shutdown 5GHz Wi-Fi networks.   3. Download and open the free Koogeek Home app from the App Store. 4. Log in or sign up for a Koogeek account or simply tap Skip. 5. Tap “+” on the top right corner and follow the on-screen directions to complete network setup. Note: To add more light strips (or repeat the Smart Light Strip setup process), tap “+” and you will see the accessory list. Each accessory has an identification code, e.g., Koogeek-XXX-XXXXXX. Make sure the last 6 characters of the identification code is consistent with the last 6 characters of MAC on the back of the switch.   6. When prompted, scan the setup code or manually enter the setup code, and then follow the step to add the device to the Home and Room. Please keep the setup code for future use.   7. You can assign a name to your Smart Light Strip and use this name when speaking to Siri. For example, you can name your Smart Light Strip “bedroom light”, then launch Siri and speak “Turn on the bedroom light”. 8. Change the light color and adjust the brightness and saturation by tapping and holding the icon for 2 seconds or just asking Siri, e.g., “Set bedroom light to green” or “Set bedroom light brightness to 50%”. 9. Set up customized scenes to control multiple devices with a single command. For example, if you assign the “I'm going to bed” command to the scene of turning off bedroom light and turning on the living room light, when you speak “I'm going to bed” to Siri, everything is done.   10. For troubleshooting visit www.koogeek.com    Note: The use of a HomeKit-enabled accessory need the follow permissions:   Settings > iCloud > iCloud Drive > Turn On Settings > iCloud > Keychain > Turn On Settings > Privacy > HomeKit > Koogeek Home > Turn On
第2页共3页 Smart Light Strip Overview USB port   Switch (Reset button) LED light    Restore Factory Settings Press and hold the switch for 10 seconds and the light color will turn red. When the light color turns warm white, it indicates that you have restored the device to factory settings.  Specifications  Interface: USB port Input: 5V = 2A (Max.) Rated power: 10W Operating temperature: -20°C~45°C LED light color: 16 million colors (Support the color changing function) Dimmable: Yes LED quantity: 60 * light emitting diodes Luminous flux: 480lm (Max.) Strip length: 78.74inch /2000mm Waterproof and dustproof rating: IP65 (LED part only) Wi-Fi: 802.11b/g/n, 2.4 GHz ONLY General use  Safety Warnings For indoor use only Maintain with a dry cloth duster Keep children away from Smart Light Strip Avoid dropping DO NOT cut   DO NOT disassemble DO NOT clean with liquid DO NOT use abrasives or solvents DO NOT use in wet or damp areas (e.g. bathrooms) DO NOT use with dimmers DO NOT use in enclosed environments DO NOT exceed the recommended electrical ratings
第3页共3页Legal Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.  Controlling this HomeKit-enabled accessory automatically and away from home requires an Apple TV with tvOS 10.1 or later or an iPad with iOS 10.1 or later set up as a home hub.  FCC Caution.Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser'sauthoritytooperatetheequipment.Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:‐Reorientorrelocatethereceivingantenna.‐Increasetheseparationbetweentheequipmentandreceiver.‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.*RFwarningforMobiledevice:ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cmbetweentheradiator&yourbody.

Navigation menu