TOMTOP Technology LS1 Koogeek Smart Light Strip User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3601530
Application ID	/GHTNQEbKt2C+R8U8nmAKg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.36kB (117050 bits)
Date Submitted	2017-10-11 00:00:00
Date Available	2017-10-12 00:00:00
Creation Date	2017-09-26 08:49:30
Producing Software	Acrobat Distiller 10.1.2 (Windows)
Document Lastmod	2017-09-26 08:49:30
Document Title	Microsoft Word - EN LS1 HomeKit智能灯带说明书 英文 2017-08-03
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

LS1
Smart Light Strip
QUICK START GUIDE
1. Connect the USB connector to a power source (e.g., power bank, computer or USB
charger). The Smart Light Strip will light up in warm white to indicate it is ready for network
setup.
2. Make sure your iPhone or iPad (iOS 8.1 or later) is connected to a 2.4GHz Wi-Fi network.
Using the router utility software, shutdown 5GHz Wi-Fi networks.
3. Download and open the free Koogeek Home app from the App Store.
4. Log in or sign up for a Koogeek account or simply tap Skip.
5. Tap “+” on the top right corner and follow the on-screen directions to complete network
setup.
Note: To add more light strips (or repeat the Smart Light Strip setup process), tap “+” and
you will see the accessory list. Each accessory has an identification code, e.g.,
Koogeek-XXX-XXXXXX. Make sure the last 6 characters of the identification code is
consistent with the last 6 characters of MAC on the back of the switch.
6. When prompted, scan the setup code or manually enter the setup code, and then follow the
step to add the device to the Home and Room. Please keep the setup code for future use.
7. You can assign a name to your Smart Light Strip and use this name when speaking to Siri.
For example, you can name your Smart Light Strip “bedroom light”, then launch Siri and speak
“Turn on the bedroom light”.
8. Change the light color and adjust the brightness and saturation by tapping and holding the
icon for 2 seconds or just asking Siri, e.g., “Set bedroom light to green” or “Set bedroom light
brightness to 50%”.
9. Set up customized scenes to control multiple devices with a single command. For example,
if you assign the “I'm going to bed” command to the scene of turning off bedroom light and
turning on the living room light, when you speak “I'm going to bed” to Siri, everything is done.
10. For troubleshooting visit www.koogeek.com
Note:
The use of a HomeKit-enabled accessory need the follow permissions:
Settings > iCloud > iCloud Drive > Turn On
Settings > iCloud > Keychain > Turn On
Settings > Privacy > HomeKit > Koogeek Home > Turn On
第 1 页 共 3 页
Smart Light Strip Overview
USB port
Switch (Reset button)
LED light
Restore Factory Settings
Press and hold the switch for 10 seconds and the light color will turn red. When the light color
turns warm white, it indicates that you have restored the device to factory settings.
Specifications
Interface: USB port
Input: 5V = 2A (Max.)
Rated power: 10W
Operating temperature: -20°C~45°C
LED light color: 16 million colors (Support the color changing function)
Dimmable: Yes
LED quantity: 60 * light emitting diodes
Luminous flux: 480lm (Max.)
Strip length: 78.74inch / 2000mm
Waterproof and dustproof rating: IP65 (LED part only)
Wi-Fi: 802.11b/g/n, 2.4 GHz ONLY
General use
Safety Warnings
For indoor use only
Maintain with a dry cloth duster
Keep children away from Smart Light Strip
Avoid dropping
DO NOT cut
DO NOT disassemble
DO NOT clean with liquid
DO NOT use abrasives or solvents
DO NOT use in wet or damp areas (e.g. bathrooms)
DO NOT use with dimmers
DO NOT use in enclosed environments
DO NOT exceed the recommended electrical ratings
第 2 页 共 3 页
Legal
Use of the Works with Apple HomeKit logo means that an electronic accessory has been
designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been
certified by the developer to meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and regulatory standards.
Controlling this HomeKit-enabled accessory automatically and away from home requires
an Apple TV with tvOS 10.1 or later or an iPad with iOS 10.1 or later set up as a home hub.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
第 3 页 共 3 页

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2017:09:26 08:49:30+08:00
Modify Date                     : 2017:09:26 08:49:30+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.2 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - EN LS1 HomeKit智能灯带说明书 英文 2017-08-03
Creator                         : Administrator
Document ID                     : uuid:cf880a74-5ddc-4b8a-9005-81acebbdf7f7
Instance ID                     : uuid:bc632941-3048-41da-b24d-716fcf5a4e38
Page Count                      : 3

EXIF Metadata provided by EXIF.tools