TP Link Technologies EN020F5 300Mbps Wireless N Router User Manual 7109505091 EN020 F5 US00 1 0 QIG V1

Download:
Mirror Download [FCC.gov]
Document ID	4030740
Application ID	hFqkDSrvDzkzWUFcPugLEg==
Document Description	5. User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.32kB (816476 bits)
Date Submitted	2018-10-10 00:00:00
Date Available	2018-10-11 00:00:00
Creation Date	2018-03-27 14:12:15
Producing Software	Adobe PDF library 15.00
Document Lastmod	2018-09-29 17:14:37
Document Title	7109505091_EN020-F5(US00) 1.0_QIG_V1
Document Creator	Adobe Illustrator CC 2017 (Windows)

Quick Installation Guide
300Mbps Wireless N Router
EN020-F5
TL-WR850N
TL-WR840N
Connect the Hardware
S/
WP ET
RE
Power adapter
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the
Ethernet cable directly to the router’s WAN port as Step 2B, and then
follow Step 4 and 5 to complete the hardware connection.
WA
WE
PO
Router
Connect the power adapter
to the router.
2.B
Internet
Turn off the modem and
remove the backup battery if
it has one.
2.A
Power adapter
Connect the modem to the
router’s WAN port with an
Ethernet cable.
Modem
Turn on the modem and
then wait about2 minutes
for it to restart.
Confirm that the following
LEDs are solid and on to
verify the hardware
connection is correct.
Power
On
Wi-Fi
On
Internet
On
Connect the Ethernet cable
directly to the router’s WAN
port.
Configure the Router
FAQ (Frequently Asked Questions)
1. Connect your computer to the router (Wired or Wireless)
Q1. What can I do if the login window does not appear?
If the computer is set to a static or fixed IP address, change the settings
to obtain an IP address automatically.
Verify if http://tplinkwifi.netor http://192.168.0.1 is correctly entered in
the web browser. Alternatively, enter
http://192.168.1.1 in the web
browser and press Enter.
Use another web browser and try again.
Reboot your router and try again.
Disable then able the network adapter being used.
Wired
below:
Ethernet cable
WAN
WPS/
RESET
Q2. What can I do if I cannot access the Internet?
Wireless
a Find the SSID (Network Name)
and Wireless Password printed
on the label at the bottom of
the router.
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
b Click the network icon of your computer or go to Wi-Fi Setting of your
smart device, and then select the SSID to join the network.
Computer
Smart Device
< Settings
Wi-Fi
Connections are available
Wi-Fi
Wireless Network Connection
OR
TP-Link_XXXX
Connect automatically
CHOOSE A NETWORK...
Connect
TP-Link_XXXX
Other...
Check if the Internet is working properly by connecting a computer
directly to the modem using an Ethernet cable. If it is not, contact your
Internet Service Provider.
Log in to the web management page of the router, and go to the
Status
page to check whether the WAN IP address is valid or not. If it is, please
run the Quick Setup again; otherwise, recheck the hardware connection.
Reboot your router and try again.
For cable modem users, log in to the web management page of the
router. Go to Network > MAC Clone , click Clone MAC Address and click
Save . Then reboot both the modem and the router.
Q3. How do I restore the router to its factory default settings?
With the router powered on, use a pin to press and hold the
WPS/ RESET
button on the back panel of the router for about 8 seconds.
Log in to the web management page of the router, go to
System Tools >
Factory Defaults , and click Restore . The router will restore and reboot
automatically.
A Launch a web browser, and enterhttp://tplinkwifi.netor http://192.168.0.1 in
the address bar. Create a password (1 - 15 characters) and get started.
Note: If the login window does not appear, please refer to
FAQ > Q1.
TP-Link hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce
OPERATING FREQUENCY(the maximum transmitted power)
2400 MHz -2483.5 MHz(20dBm)
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Adapter shall be installed near the equipment and shall be easily accessible.
Do not attempt to disassemble, repair, or modify the device.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed.
Please read and follow the above safety information when operating the
device.We cannot guarantee that no accidents or damage will occur due to
improper use of device. Please use this product with care and operate at your own
risk.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Q4. What can I do if I forget my web management page
password?
Refer to FAQ > Q3 to reset the router,and then you can set up a new
password .
Q5. What can I do if I forget my wireless network password?
2.
CE Declaration of conformity
The factory default wireless password is printed on the label of the router.
Connect a computer directly to the router using an Ethernet cable. Log in
to the router’s web management page, and goWireless
to
> Wireless
Security to obtain or reset your wireless password.
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This equipment must
be installed and operated in accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
New Password
©2018 TP-Link
7109505091 REV1.0.0
Low
Middle
High
Let’s Get Started
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Caution!
B Follow the step-by-step instructions of the Quick Setup to complete the
initial configuration.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:03:27 14:12:15+09:00
Creator                         : Adobe Illustrator CC 2017 (Windows)
Modify Date                     : 2018:09:29 17:14:37+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : 7109505091_EN020-F5(US00) 1.0_QIG_V1
Metadata Date                   : 2018:09:29 17:14:37+08:00
Creator Tool                    : Adobe Illustrator CC 2017 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 184
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 13985 bytes, use -b option to extract)
Instance ID                     : uuid:fc231a82-43f9-4fb7-b885-a3eb4792b21e
Document ID                     : xmp.did:49d74071-a41f-5343-8943-2bbfafcd4a61
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:2bd9566e-3e33-41a4-8e43-e84cbcb72e3a
Derived From Document ID        : xmp.did:27c54cef-cdb0-814c-9c06-a66d6e0afb92
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:4AC8B060B8BFE311957AF4B25D46AA52, xmp.iid:49d74071-a41f-5343-8943-2bbfafcd4a61
History When                    : 2014:04:09 18:00:15+08:00, 2018:03:27 14:12:10+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CC 2017 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 1207.560547
Max Page Size H                 : 858.897949
Max Page Size Unit              : Points
Font Name                       : ArialMT, AdobeSongStd-Light, TP-LinkAktiv-Bold, TP-LinkAktiv-Regular, TP-LinkAktiv-Medium, TP-LinkAktiv-Light
Font Family                     : Arial, Adobe 宋体 Std, TP LinkAktiv-Bold, TP LinkAktiv-Regular, TP LinkAktiv-Medium, TP LinkAktiv-Light
Font Face                       : Regular, L, LinkAktiv-Bold, LinkAktiv-Regular, LinkAktiv-Medium, LinkAktiv-Light
Font Type                       : Open Type, Open Type, Unknown, Unknown, Unknown, Unknown
Font Version                    : Version 7.00, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.018;PS 5.007;hotconv 1.0.68;makeotf.lib2.5.35818, Version 5.018;PS 5.007;hotconv 1.0.68;makeotf.lib2.5.35818, Version 5.018;PS 5.007;hotconv 1.0.68;makeotf.lib2.5.35818, Version 5.018;PS 5.007;hotconv 1.0.68;makeotf.lib2.5.35818
Font Composite                  : False, False, False, False, False, False
Font File Name                  : arial.ttf, AdobeSongStd-Light.otf, AdobeHeitiStd-Regular.otf, AdobeHeitiStd-Regular.otf, AdobeHeitiStd-Regular.otf, AdobeHeitiStd-Regular.otf
Plate Names                     : Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Producer                        : Adobe PDF library 15.00
Page Count                      : 2
For                             : �����,
Bounding Box                    : 0 0 1208 859
AI Creator Version              : 16.0.0
AI Build Number                 : 682
AI Color Usage                  : Color
AI Ruler Units                  : Points
AI Color Model                  : CMYK
AI Target Resolution            : 800
AI Num Layers                   : 1
Container Version               : 11
Creator Version                 : 16
Image Height                    : 859
Image Width                     : 1208
Image Size                      : 1208x859
Megapixels                      : 1.0

EXIF Metadata provided by EXIF.tools