TRENDNET TEW656BRG 3G Mobile Wireless N Router User Manual English TEW 656BRG 1 01

TRENDNET, Inc. 3G Mobile Wireless N Router English TEW 656BRG 1 01

Contents

Manual 1

Table of ContentsVersion 04.05.2010English 11. Before You Start2. Hardware Installation 33. Configure the TEW-656BRG 44. LEDs 8 1Troubleshooting 9Wireless Tips 11
2During the installation of the TEW-656BRG, the Setup Wizard will automatically detect your ISP connection type. If the router cannot detect your ISP connection type, you can manually specify the connection type. Please contact your ISP and ensure you have all the information for one of the following connection types:1. 3G (Auto Detection) Pin Code (Optional): ________________2. 3G (Manual)Country: ________________Telecom: ________________3G Network: ________________APN (Optional): ________________Pin Code (Optional): ________________Dialed Number: ________________Account (Optional): ________________Password (Optional): ________________3. iBurstAccount: _________Password: ________________Primary DNS:_____. _____._____._____Secondary DNS:_____. _____._____._____Service Name (Optional): ________________Assigned IP Address (Optional): ________________Collect Internet Service Provider (ISP) Information
3 2. Hardware Installation1. Verify that you have an Internet connection when connecting the 3G USB adapter to your computer. Open your browser (e.g. Internet Explorer) and type in a URL (e.g. http://www.trendnet.com) in the address bar.Note: You may need to activate your Internet connection. Please contact your ISP for more information.3. Connect the power adapter to a power outlet.3G USB AdapterInternet7. Connect your computer wirelessly to the TEW-656BRG. The default SSID (Wireless Network Name) of the TEW-656BRG is TRENDnet656. Contact the manufacturer of your wireless network adapter and make sure the wireless network adapter is configured with the proper SSID. 6. Verify that the following panel lights are on: Wireless (Blue) and 3G (USB) (Blue).5. Move the Power switch to the On position.4. Connect your 3G USB adapter to the USB port on the TEW-656BRG.2. Connect the Mini-USB end of the power adapter to the TEW-656BRG. ’
4Note: Gather all information related to your Internet Connection before you start. If necessary, contact your Internet Service Provider (ISP). 3. Configure the TEW-656BRG1. Open your web browser, type http://192.168.10.1 in the Address bar, and then press Enter.2. Enter the System Password, and then click Login. By default: System Password: admin3. Select Wizard and then click Enter.4. Click Next.5. Enter the Old password (By default, the Password is admin), enter a New Password, reconfirm the New Password and then click Next. Note: 1. Setting a password prevents other users from accessing the TEW-656BRG configuration. 2. It is recommended that you enter a new password. If you decide to change this setting, please write down the new password.3. Password is limited to up to 8 characters.
57. Select 3G or iBurst (the example shown is for 3G). Then click Next. Configure the settings based on information provided by your ISP. Follow the wizard instructions to complete the configuration. Note: Each WAN type may have different options.6. Select your Time Zone and then click Next.Note: The example below is for Auto-detection. If the Setup Wizard could not automatically detect your Internet connection, select Manual and input the information using the information provided by your ISP.9. You will need to configure the following:Wireless Module (Enable/Disable): The default setting (Enable) must be selected.Network ID (SSID): The SSID is the wireless network name of your wireless network (e.g. wireless router or access point). Enter a unique SSID. Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks.Channel: In most cases, the default setting should be fine.8. Select Auto-Detection and then click Next.
6Note: 1. To protect your network from any unauthorized access it is recommended to enable wireless encryption. 2. The example below is for WPA2-PSK (AES) security. If you select WPA-PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If yourwireless adapters do not support WPA or WPA2, then select WEP.10. Select the desired Authentication mode, select the desired Encryption type, enter characters for your Pre-Shared key and then click Next. For WPA-PSK or WPA2-PSK, the Pre-Shared Key must be between 8 and 63 ASCII or 64 HEX characters. Make sure to copy down the Pre-Shared Key.11. Click Apply Settings.12. Click OK.13. Wait around 40 seconds while the TEW-656BRG reboots.
7Your Configuration is now completeRegister Your ProductTo ensure the highest level of customer service and support, please take a moment toregister your product Online at: www.trendnet.com/registerThank you for choosing TRENDnetFor detailed information regarding the TEW-656BRG’s configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com.14. Click Finish.15. Open up your browser and enter in a URL (e.g. www.trendnet.com) to verify that you have Internet connection.
8 4. LEDsWirelessBlue (Solid): Wireless is enabled.Blue (Blinking): Activity is occurring from this link.Not Illuminated: Wireless is not enabled or no power is being supplied to the TEW-656BRG.3G(USB)Blue (Solid):3G connection is establishedBlue (Blinking):Activity is occurring from this linkNot Illuminated: 3G connection is not established.

Navigation menu