TRENDNET TEW656BRG 3G Mobile Wireless N Router User Manual English TEW 656BRG 1 01

Download:
Mirror Download [FCC.gov]
Document ID	1506881
Application ID	yUMRqmE0vnl1h3KH8l/QvA==
Document Description	Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	193.88kB (2423440 bits)
Date Submitted	2011-07-22 00:00:00
Date Available	2011-07-22 00:00:00
Creation Date	2011-04-08 17:12:32
Producing Software	Corel PDF Engine Version 15.2.0.661
Document Lastmod	2011-07-19 09:48:22
Document Title	English_TEW-656BRG(1.01)
Document Creator	CorelDRAW X5
Document Author:	Fei Alexander

Table of Contents
English
1. Before You Start
2. Hardware Installation
3. Configure the TEW-656BRG
4. LEDs
Troubleshooting
Wireless Tips
11
Version 04.05.2010
Collect Internet Service Provider (ISP) Information
During the installation of the TEW-656BRG, the Setup Wizard will automatically detect
your ISP connection type. If the router cannot detect your ISP connection type, you can
manually specify the connection type. Please contact your ISP and ensure you have all
the information for one of the following connection types:
1. 3G (Auto Detection)
Pin Code (Optional): ________________
2. 3G (Manual)
Country: ________________
Telecom: ________________
3G Network: ________________
APN (Optional): ________________
Pin Code (Optional): ________________
Dialed Number: ________________
Account (Optional): ________________
Password (Optional): ________________
3. iBurst
Account: _________
Password: ________________
Primary DNS:_____. _____._____._____
Secondary DNS:_____. _____._____._____
Service Name (Optional): ________________
Assigned IP Address (Optional): ________________
2. Hardware Installation
1. Verify that you have an Internet connection
when connecting the 3G USB adapter to your
computer. Open your browser (e.g. Internet
Explorer) and type in a URL (e.g.
http://www.trendnet.com) in the address bar.
Note: You may need to activate your Internet
connection. Please contact your ISP for more
information.
Internet
3G USB Adapter
2. Connect the Mini-USB end of the power
adapter to the TEW-656BRG.
3. Connect the power adapter to a power outlet.
4. Connect your 3G USB adapter to the USB port
on the TEW-656BRG.
’
5. Move the Power switch to the On position.
6. Verify that the following panel lights are on:
Wireless (Blue) and 3G (USB) (Blue).
7. Connect your computer wirelessly to the
TEW-656BRG. The default SSID (Wireless
Network Name) of the TEW-656BRG is
TRENDnet656. Contact the manufacturer of
your wireless network adapter and make sure
the wireless network adapter is configured with
the proper SSID.
3. Configure the TEW-656BRG
Note:
Gather all information related to your Internet Connection before you start. If necessary,
contact your Internet Service Provider (ISP).
1. Open your web browser, type
http://192.168.10.1 in the Address bar, and
then press Enter.
2. Enter the System Password, and then click
Login. By default:
System Password: admin
3. Select Wizard and then click Enter.
4. Click Next.
5. Enter the Old password (By default, the
Password is admin), enter a New Password,
reconfirm the New Password and then click
Next.
Note:
1. Setting a password prevents other users from accessing the TEW-656BRG
configuration.
2. It is recommended that you enter a new password. If you decide to change this
setting, please write down the new password.
3. Password is limited to up to 8 characters.
6. Select your Time Zone and then click Next.
7. Select 3G or iBurst (the example shown is for
3G). Then click Next. Configure the settings
based on information provided by your ISP.
Follow the wizard instructions to complete the
configuration. Note: Each WAN type may have
different options.
Note:
The example below is for Auto-detection. If the Setup Wizard could not automatically
detect your Internet connection, select Manual and input the information using the
information provided by your ISP.
8. Select Auto-Detection and then click Next.
9. You will need to configure the following:
Wireless Module (Enable/Disable): The default
setting (Enable) must be selected.
Network ID (SSID): The SSID is the wireless
network name of your wireless network (e.g.
wireless router or access point). Enter a unique
SSID. Do not use anything that would be
identifying like “Smith Family Network”.
Choose something that you would easily
identify when searching for available wireless
networks.
Channel: In most cases, the default setting
should be fine.
Note:
1. To protect your network from any unauthorized access it is recommended to enable
wireless encryption.
2. The example below is for WPA2-PSK (AES) security. If you select WPA-PSK or
WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If your
wireless adapters do not support WPA or WPA2, then select WEP.
10. Select the desired Authentication mode,
select the desired Encryption type, enter
characters for your Pre-Shared key and then
click Next. For WPA-PSK or WPA2-PSK, the
Pre-Shared Key must be between 8 and 63
ASCII or 64 HEX characters. Make sure to
copy down the Pre-Shared Key.
11. Click Apply Settings.
12. Click OK.
13. Wait around 40 seconds while the
TEW-656BRG reboots.
14. Click Finish.
15. Open up your browser and enter in a URL
(e.g. www.trendnet.com) to verify that you
have Internet connection.
Your Configuration is now complete
For detailed information regarding the TEW-656BRG’s configuration and advanced settings,
please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website
at http://www.trendnet.com.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
4. LEDs
Wireless
Blue (Solid):
Wireless is enabled.
Blue (Blinking):
Activity is occurring from this link.
Not Illuminated:
Wireless is not enabled or no power is being
supplied to the TEW-656BRG.
3G(USB)
Blue (Solid):
3G connection is established
Blue (Blinking):
Activity is occurring from this link
Not Illuminated:
3G connection is not established.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Create Date                     : 2011:04:08 17:12:32-07:00
Creator Tool                    : CorelDRAW X5
Modify Date                     : 2011:07:19 09:48:22+08:00
Metadata Date                   : 2011:07:19 09:48:22+08:00
Format                          : application/pdf
Creator                         : Fei Alexander
Title                           : English_TEW-656BRG(1.01)
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Producer                        : Corel PDF Engine Version 15.2.0.661
Trapped                         : False
Document ID                     : uuid:a9666b55-de11-42ff-9df3-7df157382adf
Instance ID                     : uuid:f0771ee3-ae06-45ea-b622-3cd0748a2661
Has XFA                         : No
Page Count                      : 10
Author                          : Fei Alexander

EXIF Metadata provided by EXIF.tools