TRENDNET THA101 Home Smart Switch User Manual

TRENDNET, Inc. Home Smart Switch

User manual

Download: TRENDNET THA101 Home Smart Switch User Manual
Mirror Download [FCC.gov]TRENDNET THA101 Home Smart Switch User Manual
Document ID2321324
Application IDKUmlLUiTr6HY8AADGNq+3A==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize24.04kB (300522 bits)
Date Submitted2014-07-10 00:00:00
Date Available2014-07-11 00:00:00
Creation Date2017-10-22 01:50:28
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-22 01:50:28
Document TitleMicrosoft Word - 使用手冊 _from 442524_-ok.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: VeraHsu

THA-101 WiFi Smart Plug
Power on the Extender
Step1. Plug your Wireless Extender into an
electrical socket.
Step2. Check the LEDs: the power LED
should be always on when system is
ready.
Quick
Install
Guide
Setup for Repeater Mode
Manually Configuration:
Step1. Open Wireless Settings / AP Client
page.
Step2. Setup the SSID and Security of AP
that you want to connect to: Click
APPLY to finish.
Connect to the Wireless
Extender
Notes:
The Wireless Extender is designed as a pure wireless
device, so there are no any RJ-45 ports for Ethernet
cable to connect to. Please prepare any IEEE802.11
ac/b/g/n compliant wireless adapter for next setup
step.
Step1. Default SSID is “THA-101” and
security key is “12345678”.
OR you can use “SCAN” to refresh the
wireless network and select an AP to
connect to.
Step2. Set your wireless adapter in DHCP
client and waiting for getting IP
Address from the Wireless Extender.
Step3. Open a web browser and enter
“192.168.1.254” in URL field to open
the configuration page.
Step4. Default user name is “admin” and
password is “password” to access
WEB GUI.
“The product shall be used in the residential
environment notwithstanding use in commercial,
business environments. If you want to use other
than the above environments, please contact
AboCom first.”
WPS Configuration:
Step1. Press the WPS button of the Wireless
Extender over 3 seconds.
Step2. Then press the WPS button of the
wireless router/AP over 3 seconds
too. Step 1 and Step 2 need to be
done in 200 seconds.
4
Check if Connected
The green–checked icon ahead is the
Wireless Router/AP which the Wireless
Extender is working to.
Hardware Button Behavior
WPS button behavior:
Less than 2 sec → N/A, WPS LED no blinking.
More than 2 sec → Do WPS, WPS LED start blinking
Reset button behavior:
Less than 2 sec → N/A, D5-D1 LEDs no blinking.
2-5 seconds → Do REBOOT, D5-D1 LEDs fast blinking.
More than 5 sec→ Do Factory Default, D5-D1 LEDs
blinking slowly.
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not
possible.
This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter
except in accordance with FCC multi-transmitter product procedures.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : VeraHsu
Create Date                     : 2014:07:10 16:51:20+08:00
Modify Date                     : 2014:07:10 17:25:43+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : VeraHsu
Title                           : Microsoft Word - 使用手冊 _from 442524_-ok.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:07:10 17:25:43+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:41b321bc-41b6-40c6-ac8c-dea570a76186
Instance ID                     : uuid:a14ed8ac-2bbb-409e-a813-3e00766da370
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: XU8THA101

Navigation menu