TSC Auto ID Technology 2012001 WiFi Module User Manual WIFI EM01 UserMan 20120723

Download:
Mirror Download [FCC.gov]
Document ID	1749470
Application ID	Veg4EimWi7+sCTgnskuUGA==
Document Description	(WIFI-EM01) UserMan.pdf_20120723
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.85kB (123142 bits)
Date Submitted	2012-07-23 00:00:00
Date Available	2012-07-23 00:00:00
Creation Date	2012-07-23 15:22:20
Producing Software	Acrobat Distiller 9.5.1 (Windows)
Document Lastmod	2012-07-23 15:22:20
Document Title	Microsoft Word - 39-0000-00LF_WiFi instruction guide_E-20120723.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	anitachou

WIFI MODULE INSTALLATION GUIDE
WIFI-EM01, WIFI-EM101
Installing the WiFi Device to the Printer
Please follow the steps below to install the WiFi device.
1. Turn off the printer power.
2. Plug in the WiFi device into the RS-232 port.
3. Fasten the device by two screws.
Note:
This RS-232 interface of WiFi device is used with the
printer only.
WiFi device
LED indicator
Screw
Setting the Communication Settings
For industrial printer, the RS-232 communication parameters can be configured from the LCD control panel by
the following procedures.
1.
2.
3.
4.
Turn on the printer power.
Enter the main menu.
Select Serial Comm. Option.
Make sure the communication parameters are set to 115200 bps baud rate, None parity, 8 data bits, 1
stop bit.
Serial Comm.
Baud Rate
-- Parity --
Data Bite --
Stop Bits
--
Exit
For desktop printer models, the RS-232 communication parameters can be setup following command
Syntax:
SET COM1 115, N, 8, 1
P/N: 39-0000-00LF
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
RF exposure warning
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment must be installed and operated in accordance with provided instructions and
must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and
installers must be provided with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
SAR standard Value: 1.6 W/Kg, Maximal Measure: 0.487 W/kg
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of the
device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency
exposure limits. The Wireless Device should be used in such a manner such that the potential for human
contact during normal operation is minimized.
This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR＂)
limits when installed in specific host products operated in portable exposure conditions.
Canada, avis d'Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer
d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent
affecter son fonctionnement.
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l＇appareil de sans fil Dell est inférieure à la limite d'exposition aux
fréquences radio d'Industry Canada (IC). Utilisez l＇appareil de sans fil Dell de façon à minimiser les
contacts humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme aux limites SAR (Specific Absorption Rate – Taux
d'absorption spécifique) d'IC lorsqu'il est installé dans des produits hôtes particuliers qui fonctionnent
dans des conditions d'exposition à des appareils portables.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : anitachou
Create Date                     : 2012:07:23 15:22:20+08:00
Modify Date                     : 2012:07:23 15:22:20+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : anitachou
Title                           : Microsoft Word - 39-0000-00LF_WiFi instruction guide_E-20120723.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.5.1 (Windows)
Document ID                     : uuid:18a95281-cd48-4612-88cf-2fee1898b132
Instance ID                     : uuid:0a18af98-1514-4daa-bf43-3b6539a2199b
Page Count                      : 2

EXIF Metadata provided by EXIF.tools